GENERAL INDEX

SECTION 1 VIDEOCASSETTE RECORDERS ....................................1

SECTION 2 VIDEO CAMERAS ...........................................................51

SECTION 3 NON-LINEAR/EDITOR/DME/SWITCHER ......................91

SECTION 4 VIDEO FILE SERVER SYSTEM ...................................105

SECTION 5 DISPLAY PRODUCTS ...................................................111

SECTION 6 STILL IMAGE PRODUCTS ...........................................191

SECTION 7 SURVEILLANCE PRODUCTS ......................................235

SECTION 8 VIDEOCONFERENCING SYSTEM...............................271

SECTION 9 AUDIO EQUIPMENT......................................................283

SECTION 10 OTHER VIDEO EQUIPMENT AND ACCESSORIES ...317

PRODUCT INDEX .................................................................................346

Symbols for connectors

F-type female 6-pin (CCF) male 12-pin DUB male XLR type male
20-pin female

BNC female 6-pin (CCF) female 12-pin DUB female XLR type female

24-pin male

Phono 7-pin DUB male 12-pin male AC OUT 3-pin female

Phone female 7-pin DUB female 12-pin female 33-pin male Push in terminal

Mini female 8-pin female 14-pin (CCQ) Mini DIN 4-pin

male
33-pin female
FUSE

4-pin male 10-pin (CCJ) 14-pin (CCQ) Fuse holder

male female

10-pin (CCJ)
4-pin female female AC IN 3-pin male Slide switch
SECTION 1 VIDEOCASSETTE RECORDERS
1. Betacam SP VTRs
1-1. Betacam SP 2000PRO VTRs
PVW-2800P ............................................................2
PVW-2650P ............................................................3

VIDEOCASSETTE
PVW-2600P ............................................................4

RECORDERS
PVV-3P ...................................................................5
1-2. Betacam SP UVW series VTRs
UVW-1800P ............................................................6
UVW-1600P ............................................................7
UVW-1400AP..........................................................8
UVW-1200P ............................................................9
1-3. Betacam SP accessories.......................................10

2. DVCAM VTRs
2-1. DVCAM VTRs
DSR-2000P ...........................................................12
DSR-85P ...............................................................13
DSR-80P ...............................................................14
DSR-60P ...............................................................15
DSR-40P ...............................................................16
DSR-30P ...............................................................17
DSR-20P ...............................................................18
DSR-1P .................................................................19
DSR-70P ...............................................................20
DSR-V10P.............................................................21
DRV-1000P ...........................................................22
2-2. DVCAM VTR accessories .....................................23

3. S-VHS/VHS VTRs
3-1. S-VHS VTRs
SVO-5800P ...........................................................30
SVP-5600P ...........................................................31
SVO-9620 .............................................................32
SVP-9020..............................................................33
3-2. S-VHS VTR accessories .......................................34
3-3. VHS VTR
SVO-1320P ...........................................................37
SVO-1520P ...........................................................38
3-4. VHS VTR accessory..............................................39
3-5. VHS Hi-Fi Duplicators
SVO-965P .............................................................40
SVO-915PL ...........................................................41
3-6. Optional accessories for SVO-965P/915P ............43

4. Medical VTRs
VO-9600H .............................................................46
DSR-20MDP .........................................................47
SVO-9500MDP .....................................................48
SVO-3500MDP .....................................................49

–1–
 1-1 Betacam SP 2000PRO VTRs

PVW-2800P
Editing Recorder
B
•Superior picture quality, inherent in the Betacam SP
VIDEOCASSETTE
RECORDERS

format •More than 100 minutes of recording/playback time

using L-size Metal (for both recording and playback) or
Oxide (for playback only) cassettes •High speed picture
search provides recognizable colour pictures at up to 10
times normal speed in forward and reverse (24 times in
monochrome) •Two longitudinal audio channels with
Dolby C-type NR (Noise Reduction) system •RS-422A
9-pin interface with other RS-422A equipped Sony
machines (ex. Betacam/Betacam SP VTRs, DVCAM VTRs)
•Built-in comprehensive editing facilities •Dynamic Motion
Control with memory provides slow-motion editing capability
(when used with a player VTR equipped with DT function)
•Built-in Time Base Corrector with advanced high quality
digital dropout compensator •TBC remote control from an
optional UVR-60P •Built-in LTC/VITC/User Bits generator
and reader •Built-in character generator •Enhanced
serviceability with built-in self-diagnostics •User friendly dial
menu operation •Y/R-Y/B-Y component signal inputs and
outputs via BNC or 12-pin Betacam DUB connectors •S-
video (Y/C separate) input/output connectors •7-pin U-matic
DUB output capability (option) •Compact and lightweight (5
unit high, 19-inch rack mountable, approx. 25 kg/55 lb 2 oz)
•Low power consumption (150W)

Supplied accessories: AC power cord PM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF)
Remote control cable RCC-5G (9-pin) Differential gain Less than 3% —
Differential phase Less than 3° —
PSW 4 × 16 screws for rack mounting (4) K-factor (2T pulse) Less than 2% Less than 3%
Operation manual Y/C delay Less than 20ns Less than 20ns
Optional accessories: TBC Remote Controller UVR-60P Audio performance
Frequency response
Component colour corrector BVX-10P (20dB below peak level)*2 50Hz to 15kHz +1.5 dB 50Hz to 15kHz ±3.0dB
–3.0
Control panel extention kit BKW-2010 S/N ratio (at peak level*2
U-matic DUB out kit BKW-2030 weighed CCIR 468-3) More than 68dB (Dolby NR ON) More than 62dB (Dolby NR ON)
Distortion (at 1kHz) at
Control panel case BK-803 operational level (4dBu) Less than 1.0% Less than 2.0%
12-pin dubbing cable VDC-C5 (5 m) Wow and flutter
Remote control cable RCC-5G/10G/30G (DIN45507) Less than 0.1% rms Less than 0.1% rms
(5 m/10 m/30 m)
Rack mount kit RMM-110 Signal inputs
S-video cable SYC-2/5 (2 m/5 m) REF VIDEO IN (BNC): 1.0Vp-p, 75Ω
VIDEO IN (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
COMPONENT IN 1 (12-pin male)*3:
Specifications
Luminance 1.0Vp-p, 75Ω, sync negative
General
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Type: Editing recorder
COMPONENT IN 2 (BNC) (3)*3:
Video recording system: Rotary 4 head helical scan
Luminance 1.0Vp-p, 75Ω, sync negative
Luminance: FM recording
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Chrominance: FM recording (CTDM recording)
S-VIDEO IN: Y: 1.0Vp-p, 75Ω
Video Signal system: CCIR monochrome/PAL colour
C: 0.3Vp-p (burst), 75Ω
Operating temperature: 5 to 40°C (41 to 104°F)
AUDIO IN CH-1/2 (XLR 3-pin female):
Storage temperature: –20 to 60°C (–4 to 140°F)
LOW –60dBu, 3kΩ, balanced
Power requirements: AC 198 to 264V, 48 to 64Hz
HIGH +4dBu, 600Ω/10kΩ selectable, balanced
Power consumption: 150W
TIME CODE IN (BNC): 0.5V to 18Vp-p, 10kΩ
Humidity: Less than 80% (relative humidity)
Signal outputs
Mass: Approx. 25 kg (55 lb 2 oz)
VIDEO OUT 1 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Dimensions: 427 (W) × 237 (H) × 549 (D) mm
VIDEO OUT 2 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
(167/8 × 93/8 × 215/8 inches)
VIDEO OUT 3 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
(including projecting parts)
with or without character insertion
Tape speed: 101.5 mm/s
COMPONENT OUT 1 (12-pin male)*3:
REC/Playback time: More than 100min with BCT-90MLA
Luminance 1.0Vp-p, 75Ω, sync negative
More than 35min with BCT-30MA
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Fast Foward/Rewind time:
COMPONENT OUT 2 (BNC) (3)*3:
Less than 3min with BCT-90MLA
Luminance 1.0Vp-p, 75Ω, sync negative
Search speed:
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
SHUTTLE 19 steps, still to 24 times normal speed,
AUDIO LINE OUT (XLR 3-pin male) CH-1/2:
forward and reverse
+4dBu, 600Ω, balanced
JOG Frame by frame, forward and reverse
AUDIO MONITOR OUT (XLR 3-pin male) CH-1/2:
Metal Particle Tape Oxide Tape*1
+4dBu, 600Ω, balanced
Video performance
U-matic DUB OUT (with an optional BKW-2030):
Bandwidth: Y: 0.5Vp-p, 75Ω, C: 0.5Vp-p, 75Ω
Luminance S-VIDEO OUT: Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p (burst), 75Ω
(50% modulation) 25Hz to 5.5MHz +0.5
–4.0
dB 25Hz to 4.0MHz +0.5
–6.0
dB TIME CODE OUT (BNC):1.2Vp-p, 75Ω
Colour difference
(50% modulation) 25Hz to 2.0MHz +0.5 dB 25Hz to 1.5MHz +0.5 dB
–3.0 –3.0 *1 The specifications of “video/audio performance oxide tape” were measured by
S/N ratio:
Luminance More than 48dB More than 46dB playing back material on a standard PVW series VTR that had been recorded on a
Chrominance standard BVW series Betacam SP VTR.
AM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF) *2 Peak level: +8dB above operational level.
*3 Video amplitude 100/0/100/0 colour bars.

–2–
1-1 Betacam SP 2000PRO VTRs

PVW-2650P
Editing Player with DT
B
•Superior picture quality, inherent in the Betacam SP

VIDEOCASSETTE
RECORDERS
format •Dynamic Tracking (DT) provides broadcast quality
noiseless playback within –1 to +3 times normal speed •More
than 100 minutes of playback time using the L-size cassettes
with Metal or Oxide tape •High speed picture search provides
recognizable colour pictures at up to 10 times normal speed
in forward and reverse (24 times in monochrome) •Two
longitudinal audio channels with the Dolby C-type NR (Noise
Reduction) system •Direct RS-422A 9-pin interface with other
RS-422A equipped Sony machines (ex. Betacam/Betacam
SP VTRs, DVCAM VTRs) •Built-in Time Base Corrector with
advanced high quality digital dropout compensator •TBC
remote control from an optional UVR-60P •Built-in
LTC/VITC/User Bits reader •Built-in character generator
•Enhanced serviceability with built-in self-diagnostics •User
friendly dial menu operation
•Y/R-Y/B-Y component signal outputs via BNC or 12-pin
Betacam DUB connectors •S-video (Y/C separate) output
connector •7-pin U-matic DUB output capability (option)
•Compact and lightweight (5 unit high, 19-inch rack
mountable, approx. 25 kg/55 lb 2 oz) •Low power
consumption (130W)

Supplied accessories: AC power cord

Remote control cable RCC-5G (9-pin)
PSW 4 × 16 screws for rack mounting (4)
Operation manual
Optional accessories: TBC Remote Controller UVR-60P Differential phase Less than 3° —
Component colour corrector BVX-10P K-factor (2T pulse) Less than 2% Less than 3%
Control panel extension kit BKW-2010 Y/C delay Less than 20ns Less than 20ns
U-matic DUB out kit BKW-2030 Audio performance
Frequency response
Control panel case BK-803
(20dB below peak level)*2 50Hz to 15kHz +1.5
–3.0
dB 50Hz to 15kHz ±3.0dB
12-pin dubbing cable VDC-C5 (5 m) S/N ratio (at peak level*2
Remote control cable RCC-5G/10G/30G weighed CCIR 468-3) More than 68dB (Dolby NR ON) More than 62dB (Dolby NR ON)
(5 m/10 m/30 m) Distortion (at 1kHz) at
Rack mount kit RMM-110 operational level (4dBu) Less than 1.0% Less than 2.0%
Wow and flutter
S-Video cable SYC-2/5 (2 m/5 m) (DIN45507) Less than 0.1% rms Less than 0.1% rms

Specifications Signal inputs

REF VIDEO IN (BNC): 1.0Vp-p, 75Ω
General Signal outputs
Type: Editing player with DT VIDEO OUT 1 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Video recording system: Rotary 4 head helical scan VIDEO OUT 2 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Luminance: FM recording VIDEO OUT 3 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Chrominance: FM recording (CTDM recording) with or without character insertion
Video signal system: CCIR monochrome/PAL colour COMPONENT OUT 1 (12-pin male)*3:
Operating temperature: 5 to 40°C (41 to 104°F) Luminance 1.0Vp-p, 75Ω, sync negative
Storage temperature: –20 to 60°C (–4 to 104°F) Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Power requirements: AC 198 to 264V, 48 to 64Hz COMPONENT OUT 2 (BNC) (3)*3:
Power consumption: 130W Luminance 1.0Vp-p, 75Ω, sync negative
Humidity: Less than 80% (relative humidity) Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Mass: Approx. 25 kg (55 lb 2 oz) AUDIO LINE OUT (XLR 3-pin male) CH-1/2:
Dimensions: 427 (W) × 237 (H) × 549 (D) mm +4dBu, 600Ω, balanced
(167/8 × 93/8 × 215/8 inches) AUDIO MONITOR OUT (XLR 3-pin male) CH-1/2:
(including projecting parts) +4dBu, 600Ω, balanced
Tape speed: 101.5 mm/s U-matic DUB OUT (with an optional BKW-2030):
Playback time: More than 100min with BCT-90MLA Y: 0.5Vp-p, 75Ω, C: 0.5Vp-p, 75Ω
More than 35min with BCT-30MA S-VIDEO OUT: Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p (burst), 75Ω
Fast Forward/Rewind time: Less than 3min with BCT-90MLA TIME CODE OUT (BNC): 1.2Vp-p, 75Ω
Search speed:
SHUTTLE 19 steps, still to 24 times normal speed, forward
and reverse
JOG Frame by frame, forward and reverse
Dynamic Tracking range: –1 to +3 times normal speed

Metal Particle Tape Oxide Tape*1

Video performance
Bandwidth:
Luminance
(50% modulation) 25Hz to 5.5MHz +0.5
–4.0
dB 25Hz to 4.0MHz +0.5
–6.0
dB
Colour difference
(50% modulation) 25Hz to 2.0MHz +0.5
–3.0
dB 0.5 dB
25Hz to 1.5MHz +–3.0
S/N ratio: *1 The specifications of “video/audio performance oxide tape” were measured by
Luminance More than 48dB More than 46dB playing back material on a standard PVW series VTR that had been recorded on
Chrominance a standard BVW series Betacam SP VTR.
AM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF) *2 Peak level :+8dB above operational level.
PM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF) *3 Video amplitude 100/0/100/0 colour bars.
Differential gain Less than 3% —

–3–
 1-1 Betacam SP 2000PRO VTRs

PVW-2600P
Editing Player
B
•Superior picture quality, inherent in the Betacam SP
VIDEOCASSETTE
RECORDERS

format •More than 100 minutes of playback time using the

L-size Metal or Oxide cassettes •High speed picture
search provides recognizable colour pictures at up to 10
times normal speed in forward and reverse (24 times in
monochrome) •Two longitudinal audio channels with the
Dolby C-type NR (Noise Reduction) system •RS-422A
9-pin interface with other RS-422A equipped Sony
machines (ex. Betacam/Betacam SP VTRs, DVCAM VTRs)
•Built-in Time Base Corrector with advanced high quality
digital dropout compensator •TBC remote control from an
optional UVR-60P •Built-in LTC/VITC/User Bits reader •Built-
in character generator •Enhanced serviceability with built-in
self-diagnostics •User friendly dial menu operation •Y/R-Y/B-Y
component signal outputs via BNC or 12-pin Betacam DUB
connectors •S-video (Y/C separate) output connector •7-pin
U-matic DUB output capability (option) •Compact and
lightweight (5 unit high, 19-inch rack mountable, approx. 24.5
kg/54 lb) •Low power consumption (120W)
Supplied accessories: AC power cord
Remote control cable RCC-5G (9-pin)
PSW 4 ç 16 screws for rack mounting (4)
Operation manual
Optional accessories: TBC Remote Controller UVR-60P
Component colour corrector BVX-10P
Control panel extention kit BKW-2010
U-matic DUB out kit BKW-2030
Control panel case BK-803
12-pin dubbing cable VDC-C5 (5 m)
Remote control cable RCC-5G/10G/30G
(5 m/10 m/30 m)
Rack mount kit RMM-110
S-video cable SYC-2/5 (2 m/5 m)

Specifications
General
Type: Editing player Audio performance
Video recording system: Rotary 4 head helical scan Frequency response
Luminance: FM recording (20dB below peak level)*2 50Hz to 15kHz +1.5
–3.0
dB 50Hz to 15kHz ±3.0dB
Chrominance: FM recording (CTDM recording) S/N ratio (at peak level*2
Video Signal system: CCIR monochrome/PAL colour weighed CCIR 468-3) More than 68dB (Dolby NR ON) More than 62dB (Dolby NR ON)
Distortion (at 1kHz) at
Operating temperature: 5 to 40°C (41 to 104°F) operational level (4dBu) Less than 1.0% Less than 2.0%
Storage temperature: –20 to 60°C (–4 to 140°F) Wow and flutter
Power requirements: AC 198 to 264V, 48 to 64Hz (DIN45507) Less than 0.1% rms Less than 0.1% rms
Power consumption: 120W
Humidity: Less than 80% (relative humidity) Signal inputs
Mass: Approx. 24.5 kg (54 lb) REF VIDEO IN (BNC): 1.0Vp-p, 75Ω
Dimensions: 427 (W) × 237 (H) × 549 (D) mm Signal outputs
(167/8 × 93/8 × 215/8 inches) VIDEO OUT 1 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
(including projecting parts) VIDEO OUT 2 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Tape speed: 101.5 mm/s VIDEO OUT 3 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
Playback time: More than 100min with BCT-90MLA with or without character insertion
More than 35min with BCT-30MA COMPONENT OUT 1 (12-pin male)*3:
Fast Foward/Rewind time: Luminance 1.0Vp-p, 75Ω, sync negative
Less than 3min with BCT-90MLA Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
Search speed: COMPONENT OUT 2 (BNC) (3)*3:
SHUTTLE 19 steps, still to 24 times normal speed, Luminance 1.0Vp-p, 75Ω, sync negative
forward and reverse Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
JOG Frame by frame, forward and reverse AUDIO LINE OUT (XLR 3-pin male) CH-1/2:
+4dBu, 600Ω, balanced
Metal Particle Tape Oxide Tape*1 AUDIO MONITOR OUT (XLR 3-pin male) CH-1/2:
Video performance +4dBu, 600Ω, balanced
Bandwidth: U-matic DUB OUT (with an optional BKW-2030):
Luminance Y: 0.5Vp-p, 75Ω, C: 0.5Vp-p, 75Ω
(50% modulation) 25Hz to 5.5MHz +0.5
–4.0
dB 25Hz to 4.0MHz +0.5
–6.0
dB S-VIDEO OUT: Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p (burst), 75Ω
Colour difference
+0.5 dB
TIME CODE OUT (BNC): 1.2Vp-p, 75Ω
(50% modulation) 25Hz to 2.0MHz –3.0
25Hz to 1.5MHz +0.5
–3.0
dB
S/N ratio:
Luminance More than 48dB More than 46dB
Chrominance
AM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF)
PM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF)
Differential gain Less than 3% —
*1 The specifications of “video/audio performance oxide tape” were measured by
Differential phase Less than 3° —
playing back material on a standard PVW series VTR that had been recorded on
K-factor (2T pulse) Less than 2% Less than 3%
a standard BVW series Betacam SP VTR.
Y/C delay Less than 20ns Less than 20ns
*2 Peak level: +8dB above operational level.
*3 Video amplitude 100/0/100/0 colour bars.

–4–
1-1 Betacam SP 2000PRO VTRs

PVV-3P
Dockable Recorder
•Superior picture quality, inherit in the Betacam SP format

VIDEOCASSETTE
•Compact and light-weight design •Low power consumption

RECORDERS
•Directly connected with DXC-D30P/D30WSP/637P/327BP
via the Pro 50-pin connector •Supplied with 20-pin connector
for full colour playback in field through the optional VA-300P
and VA-500P •More than 35 minutes of recording time using
the S-size cassette (Metal particle tape only) •Two
longitudinal audio channels with the Dolby C-type Noise
Reduction system •Luminance or CTDM viewfinder •Full
range of control provided (Fast forward/
Rewind/Play/Stop/Eject) •Record review function •Built-in
LTC/VITC/User Bits generator and LTC reader with exteranl
time code lock capability •Frame accurate back space editing
without time code discontinuity at the transition points •8-digit
LCD display •Real time and date recording function •Built-in
loud speaker •Digital hours meter •Built-in microphone
external power supply (+48V, CH-1/2) •Built-in self
diagnostics with character display on TV monitor •Enhanced
serviceability
Supplied accessories: Shoulder belt
Screws M4 × 12 (2)
M4 × 6 (2)
Operation manual
Handle
Lithium battery(CR2025)
Optional accessories: NiCd Rechargeable Battery NP-1B, BA-90A
Battery case (for BP-90A) DC-500
Battery case (for NP-1B) DC-520
Battery charger BC-1WDCE
Battery charger BC-410CE
Camera adaptor CMA-8ACE
Camera adaptor (for BVP series) CA-514
Power cable (for CMA-8ACE) CCQX-3
Playback adaptor VA-300P

Specifications GEN LOCK VIDEO IN (BNC):

1.0Vp-p, 75Ω
General AUDIO IN CH-1/2 (XLR 3-pin female):
Type: Dockable recorder -60dBu/+4dBu selectable, high impedance, balanced
Operating temperature: 0 to 40˚C (32 to 104˚F) TIME CODE IN (BNC): 0.5V to 18Vp-p, 10kΩ
Storage temperature: -20 to 60˚C (-4 to 140˚F) ENCODED VIDEO OUT (Camera Video Out, BNC):
Power requirements: DC 12V +5.0
–1.0 V
1.0Vp-p, 75Ω
Power consumption: 10W TIME CODE OUT(BNC):
Humidity: Less than 85% (relative humidity) 1.0Vp-p, 75Ω
Mass: Approx. 2.8 kg (6 lb 2 oz) Others
Tape speed: 101.5 mm/s EARPHONE OUT: Mini jack
REC/Playback time: More than 35min with BCT-30MA/UVWT-30MA PLAYBACK ADAPTOR: 20-pin
Fast Forward time: Less than 7.5min with BCT-30MA/UVWT-30MA REMOTE: Stereo Mini Jack
Rewind time: Less than 5.5min with BCT-30MA/UVWT-30MA
Continuous operating time: Approx. 60min with NP-1B
(PVV-3P and DXC-637P)
Video performance (Metal Particle Tape only)*1
Bandwidth: Luminance(50% modulation):
25Hz to 5.5MHz +0.5
–4.0 dB
Colour difference (50% modulation):
25Hz to 2.0MHz +0.5
–3.0 dB
S/N ratio: Luminance(Component IN/OUT):
More than 48dB
Colour difference (AM/PM):
More than 48dB
K-pulse(2T): Less than 2%
Y/C delay: Less than 20ns

Audio performance (Metal Particle Tape only)*1

Frequency response: 50Hz to 15kHz +1.5
≈3.0 dB
S/N ratio (at 3% distortion level):
More than 62dB (CCIR 468-3, at peak level*3)
Distortion T.H.D. (at 1kHz reference level):
Less than 1.5%
Wow and flutter (DIN weighted):
Less than 0.15%rms
Signal inputs/outputs
VIDEO (from the camera head, Pro 50-pin)*2:
Luminance:1.0Vp-p, 1kΩ
Colour difference:
B-Y/R-Y; 0.7Vp-p, 1kΩ *1 The specifications of “video/audio performace” were measured by playing back material
on a standard PVW series that had been recorded on a PVV-3P.
*2 Video amplitude 100/0/100/0 colour bars

–5–
 1-2 Betacam SP UVW series VTRs

UVW-1800P
Editing Recorder
•Outstanding picture quality, thanks to Betacam SP format
VIDEOCASSETTE

•More than 100 minutes of recording/playback time using L-size

RECORDERS

metal Betacam SP cassettes •Two longitudinal audio channel

with the Dolby C-type Noise Reduction system shown in unique
bargraph indicators •Frame accurate editing: assemble and
insert (video, audio CH-1, audio CH-2 and time code) editing
capability when controlled from optional RS-422A equipped
editing controller unit •Dedicated longitudinal time code track
•Built-in Time Base Corrector with advanced high quality digital
dropout compensation •Built-in EBU time code (LTC/User-bit)
generator and reader •RS-422A 9-pin interface •Y/R-Y/B-Y
component signal input and output via BNC or 12-pin DUB
connectors •S-video (Y/C separate) input/output connectors
•Optional TBC Remote Control Unit UVR-60P •High speed
picture search provides recognizable colour picture at up to 5
times normal speed in forward and reverse (16 times in
monochrome) •Built-in character generator to monitor display
information such as VTR status, time code, self-diagnostic
messages, setup menu, and so on •Initial setup menu to preset
various detailed operational parameters •Digital hours meter
•Built-in self diagnostics with detailed warning messages
•Compact and lightweight (4 units high, approx. 19 kg/41 lb 14
oz), 19-inch rack mountable and low power consumption (85W)
Signal inputs
Supplied accessories: AC power cord REF VIDEO IN: BNC, 1.0Vp-p, 75Ω
Remote control cable RCC-5G (9-pin) VIDEO IN: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Operation manual COMPONENT IN 1: 12-pin male*3,
Optional accessories: TBC Remote controller UVR-60P Luminance: 1.0Vp-p, 75Ω, sync negative
Component colour corrector BVX-10P Colour difference:
Remote control cable RCC-5G/10G/30G (5 m/10 m/30 m) R-Y; 0.7Vp-p, 75Ω
12-pin dubbing cable VDC-C5 (5 m) B-Y; 0.7Vp-p, 75Ω
S-video cable SYC-2/5 (2 m/5 m) COMPONENT IN 2: BNC (3)*3,
Remote control unit DSRM-10 Luminance: 1.0Vp-p, 75Ω, sync negative
Rack mount unit RMM-130 Colour difference:
R-Y; 0.7Vp-p, 75Ω
B-Y; 0.7Vp-p, 75Ω
Specifications S-VIDEO IN: Mini DIN 4-pin,
Y: 1.0Vp-p, 75Ω
General C: 0.3Vp-p (burst), 75Ω
Type: Editing recorder AUDIO IN CH-1/2: XLR 3-pin female, 4dBu, 600Ω/10kΩ selectable
Video recording system: Rotary 4 head helical scan balanced
Luminance: FM recording TIME CODE IN: BNC, 0.5V to 18Vp-p, 600Ω
Chrominance: FM recording (CTDM recording) Signal outputs
Video signal system: CCIR monochrome/PAL colour VIDEO OUT 1: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Power requirements: AC 198 to 264V, 48 to 64Hz VIDEO OUT 2: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative,
Power consumption: 85W with or without character insertion
Operating temperature: 5 to 40°C (41 to 104°F) COMPONENT OUT 1: 12-pin female*3,
Luminance: 1.0Vp-p, 75Ω, sync negative
Storage temperature: –20 to 60°C (–4 to 140°F)
Colour difference:
Humidity: Less than 80% (relative humidity)
R-Y; 0.7Vp-p, 75Ω
Dimensions: 427 (W) × 193 (H) × 474 (D) mm B-Y; 0.7Vp-p, 75Ω
(167/8 × 75/8 × 183/4 inches) COMPONENT OUT 2: BNC (3)*3,
Mass: Approx. 19 kg (41 lb 14 oz) Luminance: 1.0Vp-p, 75Ω, sync negative
Tape speed: 101.5 mm/s Colour difference:
Recording/playback time: More than 100min with UVWT-90MLA R-Y; 0.7Vp-p, 75Ω
More than 35min with UVWT-30MA B-Y; 0.7Vp-p, 75Ω
Fast forward time: Less than 3min with UVWT-90MLA AUDIO LINE OUT CH-1/2: XLR 3-pin, male, 4dBu, 600Ω, balanced
Rewind time: Less than 3min with UVWT-90MLA AUDIO MONITOR OUT CH-1/2:
Search speed (with optional DSRM-10)*1: Phono, –6dBu
Shuttle: 15 steps, still to 16 times normal speed, S-VIDEO OUT: Mini DIN 4-pin,
forward and reverse Y: 1.0Vp-p, 75Ω
Jog: Frame by frame to ×2, forward and reverse C: 0.3Vp-p (burst), 75Ω
Video performance (Metal particle tape) TIME CODE OUT: BNC, 2.2Vp-p, 600Ω
Bandwidth (50% modulation): Others
REMOTE: RS-422A 9-pin multi connector
Luminance: 25Hz to 5.0MHz +1.0 –4.0 dB TBC REMOTE: D-sub 15-pin
Colour difference: 25Hz to 1.5MHz +1.0 –4.0 dB CONTROL-S (SIRCS): Stereo mini jack
S/N ratio: Luminance (Component in/out): More than 46dB HEADPHONES: JM-60 headphone stereo jack
Chrominance (1.0MHz LPF): Processor adjustment range (with optional UVR-60P)
AM; More than 48dB Video level: ±3dB
PM; More than 48dB Chroma level: ±3dB
K-factor (2T pulse): Less than 3% Black level: 0 to 100mV
Y/C delay: Less than 30ns System SC phase: 360°p-p*4
Audio performance (Metal particle tape) System sync phase: –1 to 3µs*5
Frequency responce: 50Hz to 15kHz +2.0
–3.0 dB
Y/C delay: ±100ns
(20dB below peak level)*2
S/N ratio: More than 66dB *1 Without DSRM-10 attached, search speed is 16 times forward and reverse with
(at peak level weighed CCIR468-3)*2 “REW/FFWD” button continuously depressed.
*2 Peak level: +8dB above operational level
Distortion: Less than 1.5%
*3 Video amplitude 100/0/100/0 colour bars
(at 1kHz/at operational level 4dBu) *4 With or without UVR-60P attached
Wow and flutter: Less than 0.15% rms (DIN 45507) *5 Without UVR-60P attached: ±300ns

–6–
1-2 Betacam SP UVW series VTRs

UVW-1600P
Editing Player
•Outstanding picture quality, thanks to Betacam SP format

VIDEOCASSETTE
•More than 100 minutes of playback time using L-size metal

RECORDERS
Betacam SP cassettes •Two longitudinal audio channel with
the Dolby C-type Noise Reduction system shown in unique
bargraph indicators •Dedicated longitudinal time code track
•Built-in Time Base Corrector with advanced high quality
digital dropout compensation •Built-in EBU time code
(LTC/User-bit) reader •RS-422A 9-pin interface
•Y/R-Y/B-Y component signal output via BNC or 12-pin DUB
connector •S-video (Y/C separate) output connector
•Optional TBC Remote Control Unit UVR-60P •High speed
picture search provides recognizable colour picture at up to
5 times normal speed in forward and reverse (16 times in
monochrome) •Built-in character generator to monitor
display information such as VTR status, time code,
self-diagnostic messages, setup menu, and so on •Initial
setup menu to preset various detailed operational
parameters •Digital hours meter •Built-in self diagnostics
with detailed warning messages •Compact and lightweight
(4 units high, approx. 18 kg/39 lb 10 oz), 19-inch rack
mountable and low power consumption (65W)
Supplied accessories: AC power cord
Remote control cable RCC-5G (9-pin)
Operation manual
Optional accessories: TBC Remote controller UVR-60P
Component colour corrector BVX-10P
Remote control cable RCC-5G/10G/30G (5 m/10 m/30 m)
12-pin dubbing cable VDC-C5 (5 m)
S-video cable SYC-2/5 (2 m/5 m)
Remote control unit DSRM-10
Rack mount unit RMM-130

Specifications
General Signal outputs
Type: Editing player VIDEO OUT 1: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Video recording system: Rotary 4 head helical scan VIDEO OUT 2: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Luminance: FM recording with or without character insertion
Chrominance: FM recording (CTDM recording) COMPONENT OUT 1: 12-pin female*3,
Video signal system: CCIR monochrome/PAL colour Luminance: 1.0Vp-p, 75Ω, sync negative
Power requirements: AC 198 to 264V, 48 to 64Hz Colour difference:
Power consumption: 65W R-Y; 0.7Vp-p, 75Ω
Operating temperature: 5 to 40°C (41 to 104°F) B-Y; 0.7Vp-p, 75Ω
Storage temperature: –20 to 60°C (–4 to 140°F) COMPONENT OUT 2: BNC (3)*3,
Humidity: Less than 80% (relative humidity) Luminance: 1.0Vp-p, 75Ω, sync negative
Dimensions: 427 (W) × 193 (H) × 474 (D) mm Colour difference:
(167/8 × 75/8 × 183/4 inches) R-Y; 0.7Vp-p, 75Ω
Mass: Approx. 18 kg (39 lb 10 oz) B-Y; 0.7Vp-p, 75Ω
Tape speed: 101.5 mm/s AUDIO LINE OUT CH-1/2: XLR 3-pin, male, 4dBu, 600Ω, balanced
Playback time: More than 100min with UVWT-90MLA AUDIO MONITOR OUT CH-1/2:
More than 35min with UVWT-30MA Phono, –6dBu
Fast forward time: Less than 3min with UVWT-90MLA S-VIDEO OUT: Mini DIN 4-pin,
Rewind time: Less than 3min with UVWT-90MLA Y: 1.0Vp-p, 75Ω
Search speed (with optional DSRM-10)*1: C: 0.3Vp-p (burst), 75Ω
Shuttle: 15 steps, still to 16 times normal speed, TIME CODE OUT: BNC, 2.2Vp-p, 600Ω
forward and reverse Others
Jog: Frame by frame to ×2, forward and reverse REMOTE: RS-422A 9-pin multi connector
Video performance (Metal particle tape) TBC REMOTE: D-sub 15-pin
Bandwidth (50% modulation): CONTROL-S (SIRCS): Stereo mini jack
Luminance: 25Hz to 5.0MHz +1.0 –4.0 dB HEADPHONES: JM-60 headphone stereo jack
Colour difference: 25Hz to 1.5MHz +1.0 –4.0 dB Processor adjustment range (with optional UVR-60P)
S/N ratio: Luminance (Component out): More than 46dB Video level: ±3dB
Chrominance (1.0MHz LPF): Chroma level: ±3dB
AM; More than 48dB Black level: 0 to 100mV
PM; More than 48dB System SC phase: 360°p-p*4
K-factor (2T pulse): Less than 3% System sync phase: –1 to 3µs*5
Y/C delay: Less than 30ns Y/C delay: ±100ns
Audio performance (Metal particle tape)
Frequency responce: 50Hz to 15kHz +2.0
–3.0dB
(20dB below peak level)*2
S/N ratio: More than 66dB
(at peak level weighed CCIR468-3)*2
Distortion: Less than 1.5% *1 Without DSRM-10 attached, search speed is 16 times forward and reverse with
(at 1kHz/at operational level 4dBu) “REW/FFWD” button continuously depressed.
*2 Peak level: + 8dB above operational level
Wow and flutter: Less than 0.15% rms (DIN45507)
*3 Video amplitude 100/0/100/0 colour bars
Signal inputs *4 With or without UVR-60P attached
REF VIDEO IN: BNC, 1.0Vp-p, 75Ω *5 Without UVR-60P attached: ±300ns

–7–
 1-2 Betacam SP UVW series VTRs

UVW-1400AP
Recorder
•Outstanding picture quality, thanks to Betacam SP format
VIDEOCASSETTE

•More than 100 minutes of recording/playback time using

RECORDERS

L-size metal Betacam SP cassettes •Two longitudinal audio

channel with the Dolby C-type Noise Reduction system
shown in unique bargraph indicators •Dedicated longitudinal
time code track •Built-in Time Base Stabilizer with advanced
high quality digital dropout compensation •Built-in EBU time
code (LTC/User-bit) generator and reader •25-pin remote
control interface complied with RS-232C interface for
external computer operation •Y/R-Y/B-Y component signal
inputs and outputs via BNC connectors are switchable to
RGB input/output connector •S-video (Y/C separate)
input/output connectors •Foot switch control capability
•Trigger remote out for video printers (stereo mini jack)
•Back space editing for smooth transitions between scenes
with optional remote controller •High speed picture search
provides recognizable colour picture at up to 5 times normal
speed in forward and reverse (16 times in monochrome)
•Built-in character generator to monitor display information
such as VTR status, time code, self-diagnostic messages,
setup menu, and so on •Auto repeat function •Initial setup
menu to preset various detailed operational parameters
•Digital hours meter •Built-in self diagnostics with detailed
warning messages •Compact and lightweight (4 units high,
approx. 19 kg/41 lb 14 oz), 19-inch rack mountable and low
power consumption (85W)
Supplied accessories: AC power cord S/N ratio: More than 66dB
Operation manual (at peak level weighed CCIR468-3)*2
RS-232C Protocol manual Distortion: Less than 1.5%
Optional accessories: Component colour corrector BVX-10P (at 1kHz/at operational level 4dBu)
S-video cable SYC-2/5 (2 m/5 m) Wow and flutter: Less than 0.15% rms (DIN 45507)
Remote control unit SVRM-100A Signal inputs
Foot switch FS-20 REF VIDEO: BNC (2)
Rack mount unit RMM-130 Composite video: 1.0Vp-p, 75Ω, sync negative
Composite sync: 0.2 to 5.0Vp-p, 75Ω, sync negative
Specifications (with component I/O)
VIDEO IN: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
General RGB/COMPONENT IN: BNC (3)*3,
Type: Recorder Y/Sync on G:1.0Vp-p, 75Ω, sync negative
Video recording system: Rotary 4 head helical scan G: 0.7Vp-p, 75Ω
Luminance: FM recording R-Y/R: 0.7Vp-p, 75Ω
Chrominance: FM recording (CTDM recording) B-Y/B: 0.7Vp-p, 75Ω
Video signal system: CCIR monochrome/PAL colour S-VIDEO IN: Mini DIN 4-pin,
Power requirements: AC 198 to 264V, 48 to 64Hz Y: 1.0Vp-p, 75Ω
Power consumption: 85W C: 0.3Vp-p (burst), 75Ω
Operating temperature: 5 to 40°C (41 to 104°F) AUDIO IN CH-1/2: XLR 3-pin female, 4dBu, 600Ω/10kΩ selectable
Storage temperature: –20 to 60°C (–4 to 140°F) balanced
Humidity: Less than 80% (relative humidity) Signal outputs
Dimensions: 427 (W) × 193 (H) × 474 (D) mm VIDEO OUT 1: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
(167/8 × 75/8 × 183/4 inches) VIDEO OUT 2: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Mass: Approx. 19 kg (41 lb 14 oz) with or without character insertion
Tape speed: 101.5 mm/s RGB/COMPONENT OUT: BNC (3)*3,
Recording/playback time: Y/Sync on G: 1.0Vp-p, 75Ω, sync negative
More than 100min with UVWT-90MLA G: 0.7Vp-p, 75Ω
More than 35min with UVWT-30MA R-Y/R: 0.7Vp-p, 75Ω
Fast forward time: Less than 3min with UVWT-90MLA B-Y/B: 0.7Vp-p, 75Ω
Rewind time: Less than 3min with UVWT-90MLA RGB SYNC OUT: 2Vp-p, 75Ω, sync negative
Search speed (with optional SVRM-100A)*1: S-VIDEO OUT: Mini DIN 4-pin,
Shuttle: 15 steps, still to 16 times normal speed, Y: 1.0Vp-p, 75Ω
forward and reverse C: 0.3Vp-p (burst), 75Ω
Jog: Frame by frame to ×2, forward and reverse AUDIO LINE OUT CH-1/2: XLR 3-pin, male, 4dBu, 600Ω, balanced
Video performance (Metal particle tape) AUDIO MONITOR OUT CH-1/2:
Bandwidth (50% modulation): Phono, –6dBu
Luminance: 25Hz to 5.0MHz +1.0 Others
–4.0 dB
Colour difference: 25Hz to 1.5MHz +1.0 REMOTE: RS-232C 25-pin multi connector
–4.0 dB
S/N ratio: Luminance (Component in/out): More than 46dB REMOTE 2: Stereo mini jack (for foot switch)
Chrominance (1.0MHz LPF): REMOTE OUT: Stereo mini jack (for trigger to video printer)
AM; More than 48dB CONTROL-S (SIRCS): Stereo mini jack
PM; More than 48dB HEADPHONES: JM-60 headphone stereo jack
K-factor (2T pulse): Less than 3%
Y/C delay: Less than 30ns
Audio performance (Metal particle tape)
*1 Without SVRM-100A attached, search speed is 16 times forward and reverse with
Frequency responce: 50Hz to 15kHz +2.0
–3.0 dB “REW/FFWD” button continuously depressed.
(20dB below peak level)*2 *2 Peak level: +8dB above operational level
*3 Video amplitude 100/0/100/0 colour bars

–8–
1-2 Betacam SP UVW series VTRs

UVW-1200P
Player
•Outstanding picture quality, thanks to Betacam SP format

VIDEOCASSETTE
•More than 100 minutes of playback time using L-size metal

RECORDERS
Betacam SP cassettes •Two longitudinal audio channel with
the Dolby C-type Noise Reduction system •Dedicated
longitudinal time code track •Built-in Time Base Stabilizer
with advanced high quality digital dropout compensation
•Built-in EBU time code (LTC/User-bit) reader •25-pin
remote control interface complied with RS-232C interface for
external computer operation •Y/R-Y/B-Y component signal
outputs via BNC connectors are switchable to RGB output
connector •S-video (Y/C separate) output connector •High
speed picture search provides recognizable colour picture at
up to 5 times normal speed in forward and reverse (16 times
in monochrome) •Built-in character generator to monitor
display information such as VTR status, time code, self-
diagnostic messages, setup menu, and so on •Auto repeat
function •Initial setup menu to preset various detailed
operational parameters •Digital hours meter •Built-in self
diagnostics with detailed warning messages •Compact and
lightweight (4 units high, approx. 17.5 kg/38 lb 9 oz), 19-inch
rack mountable and low power
consumption (63W)
Supplied accessories: AC power cord
Operation manual
RS-232C Protocol manual
Optional accessories: Component colour corrector BVX-10P
S-video cable SYC-2/5 (2 m/5 m)
Remote control unit DSRM-10
Rack mount unit RMM-130

Specifications
Signal outputs
General VIDEO OUT 1: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Type: Player VIDEO OUT 2: BNC, Composite video, 1.0Vp-p, 75Ω, sync negative
Video recording system: Rotary 4 head helical scan with or without character insertion
Luminance: FM recording RGB/COMPONENT OUT: BNC (3)*3,
Chrominance: FM recording (CTDM recording) Y/Sync on G: 1.0Vp-p, 75Ω, sync negative
Video signal system: CCIR monochrome/PAL colour R-Y/R: 0.7Vp-p, 75Ω
Power requirements: AC 198 to 264V, 48 to 64Hz B-Y/B: 0.7Vp-p, 75Ω
Power consumption: 63W AUDIO LINE OUT CH-1/2: XLR 3-pin, male, 4dBu, 600Ω, balanced
Operating temperature: 5 to 40°C (41 to 104°F) AUDIO MONITOR OUT CH-1/2:
Storage temperature: –20 to 60°C (–4 to 140°F) Phono, –6dBu
Humidity: Less than 80% (relative humidity) S-VIDEO OUT: Mini DIN 4-pin,
Dimensions: 427 (W) × 193 (H) × 474 (D) mm Y: 1.0Vp-p, 75Ω
(167/8 × 75/8 × 183/4 inches) C: 0.3Vp-p (burst), 75Ω
Mass: Approx. 17.5 kg (38 lb 9 oz) Others
Tape speed: 101.5 mm/s REMOTE: RS-232C 25-pin multi connector
Playback time: More than 100min with UVWT-90MLA CONTROL-S (SIRCS): Stereo mini jack
More than 35min with UVWT-30MA HEADPHONES: JM-60 headphone stereo jack
Fast forward time: Less than 3min with UVWT-90MLA
Rewind time: Less than 3min with UVWT-90MLA
Search speed (with optional DSRM-10)*1:
Shuttle: 15 steps, still to 16 times normal speed,
forward and reverse
Jog: Frame by frame to ×2, forward and reverse
Video performance (Metal particle tape)
Bandwidth (50% modulation):
Luminance: 25Hz to 5.0MHz +1.0 –4.0 dB
Colour difference: 25Hz to 1.5MHz +1.0 –4.0 dB
S/N ratio: Luminance (Component out): More than 46dB
Chrominance (1.0MHz LPF):
AM; More than 48dB
PM; More than 48dB
K-factor (2T pulse): Less than 3%
Y/C delay: Less than 30ns
Audio performance (Metal particle tape)
Frequency responce: 50Hz to 15kHz +2.0
–3.0 dB
(20dB below peak level)*2
S/N ratio: More than 66dB
(at peak level weighed CCIR468-3)*2
Distortion: Less than 1.5%
(at 1kHz/at operational level 4dBu)
Wow and flutter: Less than 0.15% rms (DIN 45507)
Signal inputs *1 Without DSRM-10 attached, search speed is 16 times forward and reverse with
REF VIDEO IN: BNC, 1.0Vp-p, 75Ω “REW/FFWD” button continuously depressed.
*2 Peak level: +8dB above operational level
*3 Video amplitude 100/0/100/0 colour bars

–9–
 1-3 Betacam SP accessories
Supplied accessories:
UVR-60P Remote control cable (5 m)
TBC Remote Controller Rack mount bracket
•Designed to remotely control the TBC for Blank panel
the PVW and UVW series VTRs Screw
VIDEOCASSETTE

Operation manual
RECORDERS

•19-inch rack mountable: Can be installed

individually with the supplied blank panel or
with another UVR-60P

Power requirements:
DC 12 V, 9 V (supplied from VTR)
Power consumption:
840 mW
Mass: 1.3 kg (2 lb 13 oz)
Dimension: 215 (W) × 44 (H) × 101 (D) mm
(81/2 × 13/4 × 4 inches)

Power requirements:
BVX-10P AC 198 to 264 V, 50/60 Hz
Component Colour Corrector Power consumption: 40 W
•Component signal colour corrector for Mass: Main unit: 6.1 kg (13 lb 7 oz)
Betacam VTR Remote controller:
•Preset/manual control of Gain, Black level 0.9 kg (1 lb 15 oz)
and Gamma on R, G, B signals Dimensions: Main unit:
424 (W) × 44 (H) × 410 (D) mm
•Easy connection—12-pin multi cables for
(163/4 × 13/4 × 161/4 inches)
component input and output, BNC Remote controller:
connectors for component input and output 212 (W) × 44 (H) × 110 (D) mm
(Y, B-Y, R-Y) (83/4 × 13/4 × 43/8 inches)
•Remote controller supplied (BVR-58) Supplied accessories:
•19-inch rack mountable Rack mount units (2)
Remote control cable
(5 m, 25-pin)
Operation and maintenance
manual

BKW-2010
Control Panel Extension Kit
•Designed to remotely control the
PVW-2800P/2650P/2600P
•Composition—Blank panel (1),
15-pin remote control cable (1),
Cable for the internal circuits (1)

Dimension: 448 (W) × 56.5 (H) × 218 (D) mm

BK-803 (173/4 × 21/4 × 85/8 inches)
Control Panel Case
•Mounts the control panel which is
removed from PVW-2800P/2650P/2600P
•Used with BKW-2010

–10–
1-3 Betacam SP accessories

SVRM-100A
Remote Control Unit
•Designed to remotely control the UVW-1400AP
•Provides wired remote control operation for

VIDEOCASSETTE
RECORDERS
STOP/REC/PAUSE/REW/PLAY/FFWD
•JOG/SHUTTLE operation •Enables ±16 times
normal speed in search operation

Specifications

Power requirements: DC 5 V (supplied from the VTR)

Power consumption: 40 mW
Remote control: Stereo mini plug
Control signal: Control S
Dimensions: 90 (W) × 39 (H) × 182 (D) mm
(35/8 × 19/16 × 71/4 inches)
Mass: 250 g (8.8 lb)

Specifications
DSRM-10 Power requirements: DC 5 V (supplied from the
Remote Control Unit connected VTR)
•Designed to remotely control the Power consumption: 50 mW
UVW-1800P/1600P/1200P Remote control: Stereo mini-plug
•Provides wired remote control operation for (with attached cable, length
STOP/REC/PAUSE/REW/PLAY/FFWD 3 m (10ft))
Dimensions: 90 (W) × 46 (H) × 182 (D)
•JOG/SHUTTLE operation
mm
•Enables ±16 times normal speed in search (35⁄8 × 113⁄16 × 71⁄4 inches)
operation Mass: Approx. 360 g (12 oz)
Supplied accessory: Operating instructions

RMM-110
Rack Mount Kit
•Designed for use in mounting
PVW-2800P/2650P/2600P into 19-inch rack

RMM-130
Rack Mount Kit
•Designed for use in mounting
UVW1800P/1600P/1400AP/1200P into
19-inch rack

–11–
 2-1 DVCAM VTRs
DSR-2000P
Editing Recorder
•Superb picture quality of the DVCAM format •Playback
capability of all DV (25 Mb/s) recorded tapes including DV
VIDEOCASSETTE

tapes recorded in LP mode and DVCPRO tapes*1 without

RECORDERS

any mechanical adaptor •Long recording time: up to 184

minutes with a standard-size cassette and 40 minutes with a
mini-size cassette •Preread editing capability*2 to perform
A/B roll editing*3 with two VTRs and sound-on-sound
capability as well as audio mix/swap and over-dubbing of
audio with no delay between video and audio •Audio cross-
fade function for clean audio transitions at editing points
•VTR-to-VTR editing without external controllers •Wide range
of digital slow speed from –1 to +1 times normal speed •Jog
audio capability •DMC (Dynamic Motion Control) provides
noiseless slow-motion playback •High-speed picture search
over a range of 60 times normal speed, in both forward and
reverse •Versatile digital interfaces: SDI, SDTI (QSDI™)*4,
i.LINK™ (DV In/Out)*5, SDTI-CP (MPEG Out)*6 and
AES/EBU digital audio •Extensive analogue interfaces:
composite, component, S-Video and XLR audio •RS-422A
remote control interface •Frame accurate editing capability
•ClipLink™ operation •Full tape dubbing with ClipLink Log
Data via SDTI (QSDI) and RS-422A interfaces •16:9 aspect
ID signal recording •Process control for highly stable video Audio Performance
signals •Built-in EBU time code and VITC generator/reader Frequency response:
•Channel condition monitoring function •Built-in signal 2CH mode (48 kHz/16-bit):
20 Hz to 20 kHz +0.5/-1.0 dB
generator •Audio level control in both recording and playback 4CH mode (32 kHz/12-bit):
modes •Dial menu operation •Key Inhibit and Rec Inhibit 20 Hz to 14.5 kHz +0.5/-1.0 dB
Dynamic range: More than 90 dB
functions to prevent accidental operation •Flexible input Distortion (THD + N): Less than 0.05%
selection between video and audio*7 •Universal powering Input Signals
system from AC 100 V to 240 V •Triple-size cassette Video (Analogue)
REF. Video (BNC x2, loop-through connection):
compartment to ensure compatibility with DV (25 Mb/s) Composite, 1.0 Vp-p, 75 Ω, sync negative
recorded tapes of all sizes and types •DSBK-200 Control Video (BNC x2, loop-through connection):
Panel for remote operation from a distance of up to 10 Composite, 1.0 Vp-p, 75 Ω, sync negative
Component (BNC x3):
metres (approx. 33 ft.) Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y: 0.7 Vp-p, 75 Ω (100%)
*1 Not compatible with the SDTI (QSDI) and i.LINK interfaces.
*2 Not available through the SDTI (QSDI) and i.LINK interfaces. B-Y: 0.7 Vp-p, 75 Ω (100%)
*3 MIX and WIPE only S-Video (DIN 4-pin x1):
*4 The SDTI (Serial Data Transport Interface) is defined as SMPTE 305M. Y: 1.0 Vp-p, 75 Ω, sync negative
The SDTI (QSDI) is the DV compressed signal interface which is defined as SMPTE 322M. C: 0.3 Vp-p, 75 Ω (at burst level)
*5 i.LINK stands for IEEE1394-1995 standards and their revisions. Video (Digital)
is the logo for products that implement i.LINK. SDI (BNC x2, active-through connection):
The optional DSBK-190 i.LINK/DV Input/Output Board is required.
*6 The optional board will be available in the future. Conforms to Serial Digital Interface (270 Mb/s),
*7 i.LINK cannot be combined with other signal interfaces. ITU-R BT.656
When SDTI (QSDI) is selected as the audio input, the video signal is assumed to be SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
SDTI (QSDI). i.LINK (DV In/Out) (6-pin x1):
However, when it is selected as the video input, other signal interfaces can be selected IEEE1394-based
for the audio input. * Using optional DSBK-190 i.LINK/DV Input/Output Board
Audio (Analogue)
Supplied Accessories: AC power cord Audio (XLR 3-pin female x4):
Operating instructions -6/0/+4 dBu, 600 Ω on/off/-60 dBu, high impedance
RCC-5G 9-pin remote control cable Audio (Digital)
Optional Accessories: i.LINK/DV Input/Output Board DSBK-190 AES/EBU (BNC x2): 75 Ω, unbalanced
Control Panel DSBK-200 Time Code
Control Panel Case BKNW-121 Time Code In (BNC x1): 0.5 Vp-p to 18 Vp-p, 3 kΩ, unbalanced
Rack Mount Kit RMM-130
TBC Remote Control Unit UVR-60P Output Signals
Remote Control Cable RCC-5G/10G/30G (5 m/10 m/30 m) Video (Analogue)
DV Cable CCF-3L (6-pin - 6-pin), CCFD-3L (6-pin - 4-pin) REF. Video (BNC x1): 0.3 Vp-p, 75 Ω, sync negative
Video 1/2/3(SUPER) (BNC x3):
Specifications Composite, 1.0 Vp-p, 75 Ω, sync negative
General Component (BNC x3):
Power requirements: AC 100 to 240 V, 50/60 Hz Y: 1.0 Vp-p, 75 Ω, sync negative
Power consumption: 110 W R-Y: 0.7 Vp-p, 75 Ω (100%)
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) B-Y: 0.7 Vp-p, 75 Ω (100%)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) S-Video (DIN 4-pin x1):
Operating humidity: Less than 80% Y: 1.0 Vp-p, 75 Ω, sync negative
Storage humidity: Less than 90% C: 0.3 Vp-p, 75 Ω (at burst level)
Mass: 18 kg (39 lb 10 oz) Video (Digital)
Dimensions: 427 (W) × 175 (H) × 496.5 (D) mm SDI (BNC x3): Conforms to Serial Digital Interface (270 Mb/s),
(16 7/8 × 7 × 19 5/8 inches) ITU-R BT.656
Tape speed: 28.221 mm/s SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Recording/Playback time: i.LINK (DV In/Out) (6-pin x1):
Standard size: 184 min. with PDV-184ME/184N/184MEM IEEE1394-based
Mini size: 40 min. with PDVM-40ME/40N/40MEM * Using optional DSBK-190 i.LINK/DV Input/Output Board
Fast forward/Rewind time: Audio (Analogue)
Standard size: Less than 3 min. with PDV-184ME/184N/184MEM Audio (XLR 3-pin male x4):
Mini size: Less than 1 min. with PDVM-40ME/40N/40MEM +4/0/-6 dBu (selectable by menu)
Search speed: Monitor (RCA x1): -11 dBu, 47 kΩ, unbalanced (-18 dBFS)
Shuttle mode: Still to ±60 times normal speed in forward and reverse Headphone (JM-60 headphone jack x1):
Digital slow mode: ±1 times normal speed in forward and reverse -∞ to -13 dBu, 8 Ω, unbalanced (-18 dBFS)
Video Performance Audio (Digital)
Band width (via analogue component I/O): AES/EBU (BNC x2): 75 Ω, unbalanced
Luminance: 25 Hz to 5.5 MHz +1.0/-2.0 dB Time Code
5.75 MHz +0/-3.0 dB (Typical measurement) Time Code Out (BNC x1):
Chrominance: 25 Hz to 2.0 MHz +1.0/-2.0 dB 2.2 Vp-p, 75 Ω, unbalanced
S/N ratio (via analogue component I/O): Remote
More than 55 dB RS-422A: D-sub 9-pin (female) (2)
K-factor (K2T, KPB): Less than 2.0% Video Control: D-sub 15-pin (male) (1)
Y/C delay: Less than 30 ns Control Panel: D-sub 15-pin (female) (1)

–12–
2-1 DVCAM VTRs
DSR-85P
High-speed Editing Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long

VIDEOCASSETTE
RECORDERS
recording time: up to 184 minutes with a standard-size
cassette and 40 minutes with a mini-size cassette •Versatile
digital interfaces: SDI*1, SDTI (QSDI) and AES/EBU digital
audio •Extensive analogue interfaces: composite, component,
S-Video and XLR audio •RS-422A remote control interface
•High-speed data transfer at four times normal speed via SDTI
(QSDI) interface •High-speed tape dubbing with ClipLink Log
Data at four times normal speed via SDTI (QSDI) and RS-
422A interfaces •ClipLink operation •Frame accurate editing
capability •Built-in EBU time code generator/reader •Time
base corrector •High-speed picture search over a range of 32
times normal speed, in both forward and reverse •Digital slow
function over a range from 0 to 0.24 times normal speed, in
both forward and reverse •Jog audio capability •SIRCS (Sony
Integrated Remote Control System) interface for the DSRM-10
Remote Control Unit
*1 The optional DSBK-120P SDI Input/Output Board is required.

Audio Performance
Supplied accessories: AC power cord
Frequency response
Operating instructions
2CH mode (48 kHz/16-bit): 20 Hz to 20 kHz +0.5/–1.0 dB
ClipLink Guide
4CH mode (32 kHz/12-bit): 20 Hz to 14.5 kHz +0.5/–1.0 dB
RCC-5G Remote Control Cable
Dynamic range: More than 85 dB
Optional accessories: SDI Input/Output Board DSBK-120P
Distortion (THD+N): Less than 0.05%
Time Code Input/Output Board DSBK-130P
Signal Inputs
Remote Control Unit DSRM-10
Video
Rack Mount Kit RMM-130
REF.VIDEO (BNC x2), loop-through connection):
TBC Remote Control Unit UVR-60P
Composite, 1.0 Vp-p, 75 Ω, sync negative
Remote Control Cable RCC-5G/10G/30G
VIDEO (BNC x2), loop-through connection):
(5 m/10 m/30 m)
Composite, 1.0 Vp-p, 75 Ω, sync negative
COMPONENT (BNC x3): Y: 1.0 Vp-p, 75 Ω, sync negative
Specifications R-Y: 0.7 Vp-p, 75 Ω (100%)
General B-Y: 0.7 Vp-p, 75 Ω (100%)
Type: High speed editing recorder S-Video (DIN 4-pin x1): Y : 1.0 Vp-p, 75 Ω, sync negative
Video recording system: Rotary 14 head helical scan C : 0.3 Vp-p, 75 Ω (at burst level)
Luminance : FM recording SDI*1 (BNC x2), active-through connection):
Chrominance : FM recording Conforms to Serial Digital Interface (270 Mb/s),
Video signal system: CCIR monochrome/PAL colour ITU-R BT.656
Power requirements: AC 220 to 240 V, 50/60 Hz SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Power consumption: 185 W Audio
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) AUDIO (XLR 3-pin female x4):
Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F) –6/0/+4 dBu, 600 Ω on/off/-60 dBu, high impedance
Operating humidity: Less than 80% AES/EBU (XLR 3-pin female x2):
Storage humidity: Less than 90% 110 Ω, balanced
Mass: 21 kg (46 lb 4 oz) Signal Outputs
Dimensions: 427 (W) × 174 (H) × 494 (D) mm Video
(167⁄8 × 67⁄8 × 191⁄2 inches) REF.VIDEO (BNC x1): 0.3 Vp-p, 75 Ω, sync negative
excluding external projections VIDEO 1/2(SUPER) (BNC x2):
Tape speed: 28.221 mm/s Composite, 1.0 Vp-p, 75 Ω, sync negative
Recording/Playback time: COMPONENT (BNC x3): Y: 1.0 Vp-p, 75 Ω, sync negative
Standard size: 184 min. w/PDV-184ME/184N/184MEM R-Y: 0.7 Vp-p, 75 Ω (100%)
Mini size: 40 min. w/PDVM-40ME/40N/40MEM B-Y: 0.7 Vp-p, 75 Ω (100%)
Fast forward/Rewind time: S-Video (DIN 4-pin x1): Y : 1.0 Vp-p, 75 Ω, sync negative
Standard size: Less than 3 min. w/PDV-184ME/184N/184MEM C : 0.3 Vp-p, 75 Ω (at burst level)
Mini size: Less than 1 min. w/PDVM-40ME/40N/40MEM SDI*1 (BNC x2): Conforms to Serial Digital Interface (270 Mb/s),
Search speed: ITU-R BT.656
When controlling via RS-422A: SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Search speed is up to 32 times in forward and Audio
reverse AUDIO (XLR 3-pin male x4):
When cotrolling via DSRM-10: 4 dBu, 600 Ω loading, low impedance, balanced
Jog mode: Still to ×2, forward and reverse AUDIO MONITOR (RCA phono jack x1):
Shuttle mode: 8 steps, still to ×16 normal speed, forward and –6 dBu, 47 kΩ, unbalanced
reverse HEADPHONES (JM-60 headphone jack x1):
Digital slow mode: 3 steps, still, ×1/5 and ×1/10 normal speed, forward –16 dBu, 8 Ω, unbalanced
and reverse AES/EBU (XLR 3-pin male x2):
110 Ω, balanced
Video Performance Time Code Input/Output*2
Band width (via analogue component I/O): Time Code In (BNC x1): 0.5 Vp-p to 18 Vp-p, 3 kΩ, unbalanced
Luminance: 25 Hz to 5.5 MHz +1.0/–2.0 dB Time Code Out (BNC x1): 2.2 Vp-p, 75 Ω, unbalanced
5.75 MHz +0/-3.0 dB (Typical measurement) Remote
Chrominance: 25 Hz to 2.0 MHz +1.0/–2.0 dB RS-422A: D-sub 9-pin (female) (1)
S/N ratio (via analogue component I/O): TBC: D-sub 15-pin (male) (1)
More than 55 dB CONTROL-S (SIRCS): Stereo mini jack (1)
K-factor (K2T, KPB): Less than 2.0%
Y/C delay: Less than 30 ns *1 Using optional DSBK-120P (SDI Input/Output Board)
*2 Using optional DSBK-130P (Time Code Input/Output Board)

–13–
 2-1 DVCAM VTRs
DSR-80P
Editing Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long
VIDEOCASSETTE
RECORDERS

recording time: up to 184 minutes with a standard-size

cassette and 40 minutes with a mini-size cassette •Versatile
digital interfaces: SDI*1, SDTI (QSDI) and AES/EBU digital
audio •Extensive analogue interfaces: composite,
component*2, RGB*2, S-Video and XLR audio •RS-422A
remote control interface •ClipLink operation •Full tape
dubbing with ClipLink Log Data via SDTI (QSDI) and
RS-422A interfaces •Frame accurate editing capability •Built-
in EBU time code generator/reader •Time base corrector
•High-speed picture search over a range of 32 times normal
speed, in both forward and reverse •Digital slow function
over a range from 0 to 0.39 times normal speed, in both
forward and reverse •Jog audio capability •SIRCS (Sony
Integrated Remote Control System) interface for the
DSRM-10 Remote Control Unit
*1 The optional DSBK-120P SDI Input/Output Board is required.
*2 Selectable by a switch on the rear panel

Supplied accessories: AC power cord

Operating instructions
ClipLink Guide
RCC-5G Remote Control Cable Signal Inputs
Optional accessories: SDI Input/Output Board DSBK-120P Video
Time Code Input/Output Board DSBK-130P REF.VIDEO (BNC x2), loop-through connection):
Remote Control Unit DSRM-10 Black burst: 0.3 Vp-p, 75 Ω, sync negative
Rack Mount Kit RMM-130 Composite sync: 2.0 Vp-p, 75 Ω, sync negative
TBC Remote Control Unit UVR-60P (when not adding sync to RGB outputs)
Remote Control Cable RCC-5G/10G/30G VIDEO (BNC x2), loop-through connection):
(5 m/10 m/30 m) Composite, 1.0 Vp-p, 75 Ω, sync negative
Specifications RGB/COMPONENT (BNC x3) (selectable):
General Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω, sync negative
Type: Editing recorder R-Y/B-Y: 0.7 Vp-p, 75 Ω (100%)
Video recording system: Rotary 6 head helical scan R.G (w/o sync).B: 0.7 Vp-p, 75 Ω
Luminance : FM recording G (w/sync): 1.0 Vp-p, 75 Ω, sync negative
Chrominance : FM recording S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
Video signal system: CCIR monochrome/PAL colour C: 0.3 Vp-p, 75 Ω (at burst level)
Power requirements: AC 220 to 240 V, 50/60 Hz SDI*1 (BNC x2), active-through connection):
Power consumption: 145 W Conforms to Serial Digital Interface (270 Mb/s),
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) ITU-R BT.656
Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F) SDTI (QSDI) (BNC x1) Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Operating humidity: Less than 80% Audio
Storage humidity: Less than 90% AUDIO (XLR 3-pin female x4):
Mass: 19 kg (41 lb 14 oz) –6/0/+4 dBu, 600 Ω on/off/–60 dBu, high impedance
Dimensions: 427 (W) × 174 (H) × 494 (D) mm AES/EBU (XLR 3-pin female x2):
(167⁄8 × 67⁄8 × 191⁄2 inches) 110 Ω, balanced
excluding external projections Signal Outputs
Tape speed: 28.221 mm/s Video
Recording/Playback time: REF.VIDEO (BNC x1):
Standard size: 184 min. w/PDV-184ME/184N/184MEM Black burst: 0.3 Vp-p, 75 Ω, sync negative
Mini size: 40 min. w/PDVM-40ME/40N/40MEM Composite sync: 2.0 Vp-p, 75 Ω, sync negative
Fast forward/Rewind time: (when not adding sync to RGB output)
Standard size: Less than 3 min. w/PDV-184ME/184N/184MEM VIDEO 1/2(SUPER) (BNC x2):
Mini size: Less than 1 min. w/PDVM-40ME/40N/40MEM Composite, 1.0 Vp-p, 75 Ω, sync negative
Search speed: RGB/COMPONENT (BNC x3) (selectable):
When controlling via RS-422A: Y/R-Y/B-Y : Y: 1.0 Vp-p, 75 Ω, sync negative
Search speed is up to 32 times in forward and R-Y/B-Y: 0.7 Vp-p, 75 Ω (100%)
reverse R.G (w/o sync).B : 0.7 Vp-p, 75 Ω
When cotrolling via DSRM-10 G (w/sync): 1.0 Vp-p, 75 Ω, sync negative
Jog mode: Still to ×2, forward and reverse S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
Shuttle mode: 8 steps, still to ×16 normal speed, forward and C: 0.3 Vp-p, 75 Ω (at burst level)
reverse SDI*1 (BNC x2): Conforms to Serial Digital Interface (270 Mb/s),
Digital slow mode: 3 steps, still, ×1/5 and ×1/10 normal speed, forward ITU-R BT.656
and reverse SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Video Performance Audio
Band width (via analogue component I/O): AUDIO (XLR 3-pin male x4):
Luminance: 25 Hz to 5.5 MHz +1.0/–2.0 dB 4 dBu, 600 Ω loading, low impedance, balanced
5.75 MHz +0/-3.0 dB (Typical measurement) AUDIO MONITOR (RCA phono jack x1):
Chrominance: 25 Hz to 2.0 MHz +1.0/–2.0 dB –6 dBu, 47 kΩ, unbalanced
S/N ratio (via analogue component I/O): HEADPHONES (JM-60 headphone jack x1):
More than 55 dB –16 dBu, 8 Ω, unbalanced
K-factor (K2T, KPB): Less than 2.0% AES/EBU (XLR 3-pin male x2):
Y/C delay: Less than 30 ns 110 Ω, balanced
Audio Performance Time Code Input/Output*2
Frequency response: Time Code In (BNC x1): 0.5 Vp-p to 18 Vp-p, 3 kΩ, unbalanced
2CH mode (48 kHz/16-bit): Time Code Out (BNC x1): 2.2 Vp-p, 75 Ω, unbalanced
20 Hz to 20 kHz +0.5/–1.0 dB Remote
4CH mode (32 kHz/12-bit): RS-422A: D-sub 9-pin (female) (1)
20 Hz to 14.5 kHz +0.5/–1.0 dB TBC: D-sub 15-pin (male) (1)
Dynamic range: More than 85 dB CONTROL-S (SIRCS): Stereo mini jack (1)
Distortion (THD+N): Less than 0.05%
*1 Using optional DSBK-120P (SDI Input/Output Board)
*2 Using optional DSBK-130P (Time Code Input/Output Board)

–14–
2-1 DVCAM VTRs
DSR-60P
Editing Player
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Versatile

VIDEOCASSETTE
RECORDERS
digital interfaces: SDI*1 and SDTI (QSDI)*2 •Extensive
analogue interfaces: composite, component*3, RGB*3,
S-Video and XLR audio •RS-422A remote control interface
•ClipLink operation •Frame accurate editing capability •Built-
in EBU time code reader •Time base corrector •High-speed
picture search over a range of 32 times normal speed, in
both forward and reverse •Digital slow function over a range
from 0 to 0.32 times normal speed, in both forward and
reverse •Jog audio capability •Auto repeat/Power-on
playback function •SIRCS (Sony Integrated Remote Control
System) interface for the DSRM-10 Remote Control Unit
*1 The optional DSBK-100P SDI Output Board is required.
*2 The optional DSBK-110P QSDI Output Board is required.
*3 Selectable by a switch on the rear panel

Supplied accessories: AC power cord

Operating instructions
ClipLink Guide
RCC-5G Remote Control Cable
Optional accessories: SDI Output Board DSBK-100P
QSDI Output Board DSBK-110P
Time Code Input/Output Board DSBK-130P
(Output only)
Remote Control Unit DSRM-10
Rack Mount Kit RMM-130
TBC Remote Control Unit UVR-60P
Remote Control Cable RCC-5G/10G/30G
(5 m/10 m/30 m)

Specifications
General Audio Performance
Type: Editing player Frequency response:
Video recording system: Rotary 2 head helical scan 2CH mode (48 kHz/16-bit)
Luminance : FM recording 20 Hz to 20 kHz +0.5/–1.0 dB
Chrominance : FM recording 4CH mode (32kHz/12-bit)
Video signal system: CCIR monochrome/PAL colour 20 Hz to 14.5 kHz +0.5/–1.0 dB
Power requirements: AC 220 to 240 V, 50/60 Hz Dynamic range: More than 85 dB
Power consumption: 87 W Distortion (THD+N): Less than 0.05%
Operating temperature: 5 ˚C to 40 ˚C (41 ˚F to 104 ˚F) Signal Inputs
Storage temperature: –20 ˚C to 60 ˚C (–4 ˚F to 140 ˚F) Video
Operating humidity: Less than 80% REF.VIDEO (BNC x2), loop-through connection):
Storage humidity: Less than 90% Black burst: 0.3 Vp-p, 75 Ω, sync negative
Mass: 18 kg (39 lb 10 oz) Composite sync: 2.0 Vp-p, 75 Ω, sync negative
Dimensions: 427 (W) × 174 (H) × 494 (D) mm (when not adding sync to RGB)
(167⁄8 × 67⁄8 × 191⁄2 inches) Signal Outputs
excluding external projections Video
Tape speed: 28.221 mm/s REF.VIDEO (BNC x1):
Recording/Playback time: Black burst: 0.3 Vp-p, 75 Ω, sync negative
Standard size: 184 min. w/PDV-184ME/184N/184MEM Composite sync: 2.0 Vp-p, 75 Ω, sync negative
(when not adding sync to RGB output)
Mini size: 40 min. w/PDVM-40ME/40N/40MEM
VIDEO 1/2(SUPER) (BNC x2):
Fast forward/Rewind time:
Composite, 1.0 Vp-p, 75 Ω, sync negative
Standard size: Less than 3 min. w/PDV-184ME/184N/184MEM
RGB/COMPONENT (BNC x3) (selectable):
Mini size: Less than 1 min. w/PDVM-40ME/40N/40MEM
Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω, sync negative
Search speed:
R-Y/B-Y: 0.7 Vp-p, 75 Ω (100%)
When controlling via RS-422A:
R.G (w/o sync).B: 0.7 Vp-p, 75 Ω
Search speed is up to 32 times in forward and
G (w/sync): 1.0 Vp-p, 75 Ω, sync negative
reverse
S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
When cotrolling via DSRM-10:
C: 0.3 Vp-p, 75 Ω (at burst level)
Jog mode: Still to ×2, forward and reverse
SDI*1 (BNC x2): Conforms to Serial Digital Interface (270 Mb/s),
Shuttle mode: 8 steps, still to ×16 normal speed, forward and
ITU-R BT.656
reverse
SDTI (QSDI)*2 (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M
Digital slow mode: 3 steps, still, ×1/5 and ×1/10 normal speed, forward
Audio
and reverse
AUDIO (XLR 3-pin male x4):
Video Performance
4 dBu, 600 Ω loading, low impedance, balanced
Band width (via analogue component I/O):
AUDIO MONITOR (RCA phono jack x1):
Luminance: 25 Hz to 5.5 MHz +1.0/–2.0 dB
–6 dBu, 47 kΩ, unbalanced
5.75 MHz +0/-3.0dB (Typical measurement)
HEADPHONES (JM-60 headphone jack x1):
Chrominance: 25 Hz to 2.0 MHz +1.0/–2.0 dB
–16 dBu, 8 Ω, unbalanced
S/N ratio (via analogue component I/O):
Time Code Output*3
More than 55 dB
Time Code Out (BNC x1): 2.2 Vp-p, 75 Ω, unbalanced
K-factor (K2T, KPB): Less than 2.0%
Remote
Y/C delay: Less than 30 ns
RS-422A: D-sub 9-pin (female) (1)
TBC: D-sub 15-pin (male) (1)
CONTROL-S (SIRCS): Stereo mini jack (1)
*1 Using optional DSBK-100P (SDI Output Board)
*2 Using optional DSBK-110P (QSDI Output Board)
*3 Using optional DSBK-130P (Time Code Input/Output Board)

–15–
 2-1 DVCAM VTRs
DSR-40P
Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long
VIDEOCASSETTE
RECORDERS

recording time: up to 184 minutes with a standard-size

cassette and 40 minutes with a mini-size cassette •RS-422A
remote control interface enables this unit to perform as the
editing player in an A/B roll editing system*1 or cut-editing
system •i.LINK (DV In/Out) interface providing a single cable
connection to simultaneously transfer data and control
signals as well as digital video and audio signals, with
virtually no generation loss •Full range of analogue video
outputs: composite, component, S-Video and XLR audio
•Control S interface for remote control operation •External
Sync In connector for synchronised playback •Auto repeat
function •Compact and lightweight (half-rack width) •Index
Points search functions (when using a cassette with IC
Cassette Memory)
*1 Since the DSR-40P is not equipped with the synchronisation capability, the editing
accuracy is performed by pre-roll and play.

Supplied accessories: Cleaning cassette

AC power cord
Operating instructions

Optional accessories: Remote Control Unit DSRM-20

VMC-IL4415 i.LINK Cable
VMC-IL4435 i.LINK Cable
VMC-IL4615 i.LINK Cable
VMC-IL4635 i.LINK Cable

Specifications
General
Type: Recorder
Video signal standard: CCIR standards, PAL colour Audio (Analogue)
Power requirements: AC: 220 to 240 V, 50/60 Hz Audio (XLR 3-pin male x2, stereo L/R):
Power consumption: 40 W 4 dBu, balanced
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) Monitor (Phono jack x2, stereo L/R):
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) 2 Vrms
Mass: Approx. 5.0 kg (11 lb) Digital Input/Output
Dimensions: 212 (W) × 98 (H) × 392 (D) mm i.LINK (DV In/Out) (4-pin x1):
(8 3/8 × 3 7/8 × 15 1/2 inches) IEEE1394-based
(including external projections)
Tape speed: OTHERS
DVCAM mode: 28.221 mm/s RS-422A: D-sub 9-pin (female) (1)
DV SP playback mode: 18.831 mm/s Control S IN: Stereo mini jack (1)
Recording/Playback time: Headphone: Stereo mini jack (1)
Standard size: 184 min. with PDV-184ME/184N/184MEM
Mini size: 40 min. with PDVM-40ME/40N/40MEM
Tape rewind time: Less than 2 min. with PDV-184ME/184N/184MEM
Search speed (via DSRM-20):
Shuttle mode: ±1/10, 1/5, 1, 2, approx. 10, approx. 17 times
Jog mode: ±1/10, 1/5, 1, 2 times

Signal Inputs
Video (Analogue)
Ref.Video (BNC x1): Black burst: 75 Ω, sync negative
Video (BNC x1): Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S-Video (Mini DIN 4-pin x1):
Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier), 75 Ω, unbalanced
Audio (Analogue)
Audio (RCA phono jack x2/stereo L/R):
2 Vrms (full bit)

Signal outputs
Video (Analogue)
Video (BNC x1): Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S-Video (Mini DIN 4-pin x1):
Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier), 75 Ω, unbalanced
Component (BNC x3): Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
R-Y/B-Y: 0.7 Vp-p (with 100% colour burst)
Monitor (BNC x1): Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative

–16–
2-1 DVCAM VTRs

DSR-30P
Recorder
•Superb picture quality of the DVCAM format •Playback

VIDEOCASSETTE
capability of DV recorded tapes (SP mode only) •Long

RECORDERS
recording time: up to 184 minutes with a standard-size
cassette and 40 minutes with a mini-size cassette •i.LINK
(DV In/Out) interface providing a single cable connection to
simultaneously transfer data and control signals as well as
digital video and audio signals, with virtually no generation
loss •LANC interface for simple editing with a LANC-
equipped recorder or editing system •Auto repeat function
•One-programme playback function to automatically rewind
to the beginning of a tape and enter Standby mode •Power-
on playback/recording capabilities •External timer recording
•Duplication mode with original time code •Function lock to
avoid accidental operation •Built-in control tray with a
Jog/Shuttle dial with a range of 1/5 to 18 times normal
speed, in both forward and reverse •Index Points search
functions (when using a cassette with IC Cassette Memory)
•Clear frame picture •RMT-DS30 Wireless Remote
Controller (supplied accessory) for control of basic functions
•Headphone/microphone connections
Supplied accessories: AC power cord
Operating instructions
Wireless Remote Controller RMT-DS30
R6 batteries
LANC cable
Cleaning cassette DVM12CL
Optional accessories: VMC-IL4415 i.LINK cable
VMC-IL4435 i.LINK cable
VMC-IL4615 i.LINK cable
VMC-IL4635 i.LINK cable
Editing System FXE-120P
LANC Interface Box IF-FXE2

Specifications
General Video (DIGITAL)
Type: Recorder i.LINK (DV In/Out) (4-pin x1)*:
Video signal system: CCIR monochrome/PAL colour IEEE1394-based
Power requirements: AC 220 to 240 V, 50/60 Hz Audio (ANALOGUE)
Power consumption: 32 W Audio (Phono jacks x1, stereo L/R):
Operating temperature: 5 ˚C to 40 ˚C (41 ˚F to 104 ˚F) Output level : 2 Vrms (full bit)
Storage temperature: –20 ˚C to 60 ˚C (–4 ˚F to 140 ˚F) Remote
Mass: Approx. 9.2 kg (20 lb 4 oz) LANC: Stereo mini-mini jack (2)
Dimensions: 430 (W) × 129 (H) × 374 (D) mm (front x 1, rear x 1, priority on the front)
(17 × 51⁄8 × 143⁄4 inches) CONTROL-S input: Mini jack (1)
Tape speed: 28.221 mm/s (DVCAM mode) CONTROL-S output: Mini jack (1)
18.831 mm/s (DV SP playback mode)
Recording/Playback time: Others
Standard size: 184 min. w/PDV-184ME/184N/184MEM Headphone jack: Stereo mini jack (1)
Mini size: 40 min. w/PDVM-40ME/40N/40MEM Trigger input: Phone jack (1) (active short)
Fast forward/Rewind time: MIC input: Mini jack (2)
Standard size: Less than 2 min. w/PDV-184ME/184N/184MEM
Search speed: –2, –1, –1/5, still, 1/5, 1, 2 times
Cue/Review (10 or 18 times)
Signal Inputs
Video (ANALOGUE)
VIDEO (BNC x1, Phono jack x1):
Composite, 1.0 Vp-p, 75 Ω, sync negative
S-Video (Mini DIN 4-pin x2, front x1, rear x1):
Y: 1.0 Vp-p, 75 Ω, sync negative, unbalanced
C : 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced
Video (DIGITAL)
i.LINK (DV In/Out) (4-pin x1):
IEEE1394-based
Audio (ANALOGUE)
Audio (Phono jacks x2/stereo L/R, front x1, rear x1):
Input level : 2 Vrms (full bit)
Signal Outputs
Video (ANALOGUE)
VIDEO (BNC x2, Phono jack x1):
Composite, 1.0 Vp-p, 75 Ω, sync negative
S-Video (Mini DIN 4-pin x2):
Y : 1.0 Vp-p, 75 Ω, sync negative, unbalanced
C : 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced

*Shared with input connector.

–17–
 2-1 DVCAM VTRs
DSR-20P
Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long
VIDEOCASSETTE
RECORDERS

recording time: up to 184 minutes with a standard-size

cassette and 40 minutes with a mini-size cassette •i.LINK
(DV In/Out) interface providing a single cable connection to
simultaneously transfer data and control signals as well as
digital video and audio signals, with virtually no generation
loss •LANC interface for simple editing with a LANC-
equipped recorder or editing system •RS-232C and Control S
interfaces for remote control operation •External Sync*1 In
connector for synchronised playback •Auto repeat function
•Power-on playback/recording capabilities •Duplication mode
with original time code •Compact and lightweight (half-rack
width) •AC/DC operation •Index Points search functions
(when using a cassette with IC Cassette Memory)
•RMT-DS20 Wireless Remote Controller (supplied
accessory) for control of basic functions
*1 The DSR-20P locks to V-sync only.

Supplied accessories: Wireless remote controller RMT-DS20 (1)

R6 batteries (2)
Cleaning cassette DCM12CLE (1)
AC power cord (1)
Operation manual (1)
RS-232C protocol manual (1)
Optional accessories: LANC Interface Box IF-FXE2
Remote Control Unit DSRM-10
VMC-IL4415 i.LINK Cable
VMC-IL4435 i.LINK Cable
VMC-IL4615 i.LINK Cable
VMC-IL4635 i.LINK Cable

Specifications
General
Type: Recorder
Video signal standard: CCIR standards, PAL colour
Power requirement: AC: 220 to 240 V, 50/60 Hz DC: 12 V Audio(ANALOGUE)
Power consumption: AC: 28 W DC: 2.0 A (4.0 A PEAK) AUDIO (Phono jack x2/stereo L/R):
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) 2 Vrms (full bit)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) L: CH1, CH3, or CH1/3 mix
Mass: Approx. 5.0 kg (11 lb) R: CH2, CH4, or CH2/4 mix
Dimensions: 212 (W) × 98 (H) × 392 (D) mm
(8 3⁄8 × 3 7⁄8 × 15 1⁄2 inches) Digital Input/Output
(including external projections) i.LINK (DV In/Out) (4-pin x1):
Tape speed: IEEE1394-based
DVCAM mode: 28.221 mm/s
DV SP playback mode: 18.831 mm/s OTHERS
Recording/Playback time: LANC: Stereo mini-mini jack (1)
Standard size: 184 min. with PDV-184ME/184N/184MEM RS-232C: D-sub 9-pin (male) (1)
Mini size: 40 min. with PDVM-40ME/40N/40MEM Control S: Stereo mini jack (IN (1) / OUT (1))
Tape rewind time: Less than 2 min. with PDV-184ME/184N/184MEM DC IN (12 V): Canon 4-pin (1)
Search speed (via RMT-DS20 or DSRM-10): Headphone: Stereo mini jack (1)
-2, -1, -1/5, still, 1/5, 1, 2, Cue/Review (10 or 18 times)
*1 Shared with the External Sync IN

Signal Inputs
Video (ANALOGUE)
VIDEO (BNC x1)*1: Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S-Video (Mini DIN 4-pin x1):
Y:1.0 Vp-p, 75 Ω, unbalanced, sync negative
C:0.3 Vp-p (subcarrier), 75 Ω, unbalanced

Audio(ANALOGUE)
AUDIO (Phono jack x2/stereo L/R):
2 Vrms (full bit)

Signal outputs
Video(ANALOGUE)
VIDEO (BNC x1): Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S-Video (Mini DIN 4-pin x1):
Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier), 75 Ω, unbalanced
Monitor (BNC x1): Composite, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative

–18–
2-1 DVCAM VTRs

DSR-1P
Dockable Recorder
•Compact and lightweight: 2.85 kg (6 lb 4 oz) including

VIDEOCASSETTE
battery •Perfect camcorder operation by docking with the

RECORDERS
DXC-D30P Digital Video Camera •Dual-size cassette
mechanism: both standard- and mini-size cassettes
accepted •Dual interface mechanism: Pro 76-pin Digital and
Pro 50-pin interfaces for direct connection with both Sony
digital and analogue cameras •Superb picture quality of the
DVCAM format •Playback capability of DV recorded tapes
(SP mode only) •Long recording time: up to 184 minutes with
a standard-size cassette and 40 minutes with a mini-size
cassette •ClipLink operation •Full colour picture playback
capability without any playback adaptor •Record review
function •Frame accurate back-space editing •Built-in EBU
time code generator/reader •Time base stabiliser •Full VTR
function control (Fast Forward/Rewind/Play/Stop/Eject)
•Comprehensive 8-digit LCD
Supplied accessories: Shoulder strap
Lithium-ion button cell (type CR2032)
Operating instructions
ClipLink Guide
Connector cap
M4 ×6 Screws (2)
M4 ×12 Screws (2)
Optional accessories: Rechargeable NiCd Battery NP-1B
Rechargeable NiCd Battery BP-90A
Rechargeable Lithium-ion Battery BP-L60/L90
Battery Case (for NP-1B) DC-520
Battery Case (for BP-90A) DC-500
Battery Case (for BP-90A, waist belt type) DC-210
Battery Adaptor (for BP-L60/L90) BKW-L601
Battery Charger (for NP-1B) BC-1WDCE
Battery Charger (for BP-90A/NP-1B) BC-410CE
Battery Charger (for BP-L60/L90) BC-L100CE
AC Power Adaptor CMA-8ACE
AC Power Adaptor AC-550CE
Power Supply Cable (for CMA-8ACE) CCQX-3
Camera Adaptor (for BVP series) CA-514

Specifications
General Audio Performance
Type: Dockable recorder Frequency response:
Power requirements: DC 12 V, +5/-1 V 2CH mode (48 kHz/16-bit)
Power consumption: 12 W (10 W in recording mode w/DXC-D30P) 20 Hz to 20 kHz +0.5/–1.0 dB
Operating temperature: 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F) 4CH mode (32 kHz/12-bit)
Storage temperature: –20 ˚C to 60 ˚C (–4 ˚F to 140 ˚F) 20 Hz to 14.5 kHz +0.5/–1.0 dB
Operating humidity: Less than 85% Dynamic range: More than 80 dB
Storage humidity: Less than 90% Distortion (THD+N): Less than 0.08%
Mass: 2.85 kg (6 lb 4 oz) (including NP-1B Battery)
Dimensions: 118 (W) × 185 (H) × 210 (D) mm Signal Inputs
(43⁄4 × 73⁄8 × 83⁄8 inches) GEN LOCK VIDEO IN (BNC):
Tape speed: 28.221 mm/s 1.0 Vp-p, 75 Ω
Recording/Playback time: EXT AUDIO IN CH-1/2 (XLR 3-pin female):
Standard size: 184 min. w/PDV-184ME/184N/184MEM –60 dBu, 3 kΩ/±4 dBu, 10 kΩ
Mini size: 40 min. w/PDVM-40ME/40N/40MEM TIME CODE IN (BNC): 0.5 Vp-p to 18 Vp-p, 10 kΩ
Fast forward/Rewind time:
Standard size: Less than 12 min. w/PDV-184ME/184N/184MEM Signal Outputs
Mini size: Less than 3 min. w/PDVM-40ME/40N/40MEM VIDEO OUT (BNC): 1.0 Vp-p, 75 Ω
Continuous recording time: S-VIDEO (DIN 4-pin): Y : 1.0 Vp-p, 75 Ω, sync negative
Approx. 60 min. w/NP-1B (DSR-1P+DXC-D30P) C : 0.3 Vp-p, 75 Ω
AUDIO OUT CH-1/2 (RCA pin):
Video Performance –10 dBu, 47 kΩ
Band width: TIME CODE OUT (BNC): 1.0 Vp-p, 75 Ω
Luminance: 25 Hz to 5.5 MHz +1.0/–2.0 dB
5.75 MHz +0/-3.0 dB (Typical measurement) Others
Chrominance: 25 Hz to 2.0 MHz +1.0/–2.0 dB ANALOGUE I/F: Pro 50-pin (1)
S/N ratio: More than 55 dB DIGITAL I/F: Pro 76-pin Digital (1)
K-factor (K2T, KPB): Less than 2.0% DC 12V: XLR 4-pin (male) (at rear) (1)
Y/C delay: Less than 30 ns DC OUT: XLR 4-pin (female) (1)
EARPHONE OUT: Stereo mini jack (1)

* The specifications of “Video/Audio performance” were measured by playing back material

on the DSR-85P (via analogue component out) that had been recorded on the DSR-1P.

–19–
 2-1 DVCAM VTRs
DSR-70P
Portable Editing Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long
VIDEOCASSETTE
RECORDERS

recording time: up to 184 minutes with a standard-size

cassette and 40 minutes with a mini-size cassette •Compact,
all-in-one package including a 6.4-inch VGA LCD monitor, a
full cut-editing controller with a Jog/Shuttle dial and an audio
speaker •VTR-to-VTR editing as a double deck editor by
docking two DSR-70P units or a DSR-70P and a DNW-A25P
Betacam SX portable editing recorder •Two-camera switching
recording*1 •Sequential recording for up to six hours in the
double deck configuration •Parallel-run recording to make two
docked DSR-70P units record simultaneously •Audio
mix/swap recording •ClipLink operation: cue up to Mark
In/Cue address, change of Mark In/Out points, change of
OK/NG status and creation of new Mark In/Out points •Full
tape dubbing with ClipLink Log Data via SDTI (QSDI) and
RS-422A interfaces •Versatile digital interfaces: SDI*2, SDTI
(QSDI)*3 and i.LINK (DV In/Out)*4 •Extensive analogue
interfaces: composite, component*5, S-Video and XLR audio
•RS-422A remote control interface •Frame accurate editing
capability •Built-in EBU time code generator/reader •Process
control for highly stable video signals •High-speed picture
search over a range of 32 times normal speed, in both
forward and revers •Digital slow function over a range of 0 to
0.5 times normal speed, in both forward and reverse •Jog
audio capability •Two-way power supply system for operation
on either AC or DC power •16:9 and 4:3 switchable
*1 The optional DSBK-180P Dual Video Input Board is required.
*2 The optional DSBK-160 SDI Input/Output Board is required.
*3 The optional DSBK-150 SDTI (QSDI) Input/Output Board is required.
*4 The optional DSBK-140 i.LINK/DV Input/Output Board is required.
*5 The optional DSBK-170 Analogue Component Input/Output Board is required.
Note: Optional interface boards (DSBK-140/150/160/170) cannot be used in combination
with each other.
However, these boards can be used together with the optional DSBK-180P.

Supplied accessories: Carrying Belt (1)

Operation Manual (1) (without optional interface boards)
Connector Cap ((1) / per interface)
Optional accessories: i.LINK/DV Input/Output Board DSBK-140 Video (DIGITAL)
SDTI(QSDI) Input/Output Board DSBK-150 i.LINK (DV In/Out) (6-pin x1)*2:
SDI Input/Output Board DSBK-160 IEEE1394-based
Analogue Component Input/Output Board DSBK-170 SDTI(QSDI) (BNC x1)*3: Conforms to SDTI (270 Mb/s), SMPTE305M/322M
Dual Video Input Board DSBK-180P SDI (BNC x1)*4: Conforms to Serial Digital Interface (270 Mb/s), ITU-R
Rechargeable Lithium-ion Battery BP-L60A/L90A BT.656
Battery Charger for BP-L60A/L90A BC-L50 Audio (ANALOGUE)
Battery Charger for BP-L60A/L90A BC-L100CE Audio (CH-1,2): XLR 3-pin female (2)
AC Adaptor AC-DN2A Signal Outputs
AC Adaptor AC-550CE Video (ANALOGUE)
AC Adapror CMA-8ACE Ref. Video (BNC x1): 0.3 Vp-p, 75 Ω, sync negative
Remote Control Cable RCC-5G/10G/30G Video 1/2(SUPER) (BNC x2):
Docking Kit BKNW-225 Composite, 1.0 Vp-p, 75 Ω, sync negative
Carrying Case LC-DN220 Component (BNC x3)*1: Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y: 0.7 Vp-p, 75 Ω (100 %)
SPECIFICATIONS B-Y: 0.7 Vp-p, 75 Ω (100 %)
GENERAL S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
Power requirements: DC 12 V C: 0.3 Vp-p, 75 Ω (at burst level)
Power consumption: 46 W (without options) Video (DIGITAL)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) i.LINK (DV In/Out) (6-pin x1)*2 *5:
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) IEEE1394-based
Operating humidity: Less than 80 % SDTI(QSDI) (BNC x1)*3: Conforms to SDTI (270 Mb/s), SMPTE305M/322M
Storage humidity: Less than 90 % SDI (BNC x2)* :4 Conforms to Serial Digital Interface (270 Mb/s), ITU-R
Mass: 5.8 kg (12 lb 12 oz) BT.656
Dimensions: 211 (W) × 149 (H) × 443 (D) mm Audio (ANALOGUE)
(8 3⁄8 × 5 7⁄8 × 17 1⁄2 inches) Audio (CH-1,2 or CH-3,4): XLR 3-pin female (2)
Tape speed: 28.221 mm/s Audio monitor (R/L): RCA phono jack (1)
Recording/Playback time: Headphones: JM-60 stereo phone jack (1)
Standard size: 184 min. with PDV-184ME/184N/184MEM Time Code
Mini size: 40 min. with PDVM-40ME/40N/40MEM Time code input: BNC (1)
Fast forward/Rewind time: Time code output: BNC (1)
Standard size: Less than 3 min. with PDV-184ME/184N LCD
Mini size: Less than 1 min. with PDVM-40ME/40N LCD display (1) 6.4-inch VGA, 640 (H) x 480 (V)
Search speed: x32, forward and reverse Speaker
Signal Inputs Built-in speaker (1) Monaural
Video (ANALOGUE) Remote
Ref. Video (BNC x2), loop-through connection): RS-422A D-sub 9-pin (female) (1)
Composite, 1.0 Vp-p, 75 Ω, sync negative Others
Video (BNC x2), loop-through connection): DC 12 V input: XLR 4-pin (1)
Composite, 1.0 Vp-p, 75 Ω, sync negative
Component (BNC x3)*1: Y: 1.0 Vp-p, 75 Ω, sync negative *1 Using optional DSBK-170 Analogue Component Input/Output Board
R-Y: 0.7 Vp-p, 75 Ω (100 %) *2 Using optional DSBK-140 (i.LINK/DV Input/Output Board)
*3 Using optional DSBK-150 (SDTI(QSDI) Input/Output Board)
B-Y: 0.7 Vp-p, 75 Ω (100 %) *4 Using an optional DSBK-160 (SDI Input/Output Board)
S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative *5 Shared with input connector
C: 0.3 Vp-p, 75 Ω (at burst level)

–20–
2-1 DVCAM VTRs

DSR-V10P
DVCAM Video Walkman® Recorder
•Superb picture quality of the DVCAM format •Playback

VIDEOCASSETTE
capability of DV recorded tapes (SP mode only) •40 minutes

RECORDERS
recording time with a mini-size cassette*1 •Compact and
lightweight: 970 g (2 lb 2 oz) without battery and tape •Built-
in 5.5-inch LCD monitor •InfoLITHIUM battery system:
Lithium-ion battery power system that shows the amount of
power remaining in the battery, to an accuracy of less than
one minute •i.LINK (DV In/Out) interface providing a single
cable connection to simultaneously transfer data and control
signals as well as digital video and audio signals, with
virtually no generation loss •LANC interface for simple editing
with a LANC-equipped recorder or editing system •Assemble
editing with up to 99 events x four programmes with the
optional DSRM-E1P Edit Adaptor •Auto repeat function
•Duplication mode with original time code •Hands-free
shooting capability with the optional CVX-V1P/V3P/V18NSP
Mini Camera
*1 The DSR-V10P accepts only mini-size DVCAM and DV cassettes.

Supplied Accessories: AC-V700 AC Adaptor/Charger

Carrying Belt
Operating instruction manual
i.LINK (DV) Cable
Optional Accessories: DSRM-E1P
CVX-V1P
CVX-V3P
CVX-V18NSP
AC-V700 AC Adaptor/Charger
VMC-IL4415 i.LINK Cable
VMC-IL4435 i.LINK Cable
VMC-IL4615 i.LINK Cable
VMC-IL4635 i.LINK Cable

Specifications
GENERAL
Video signal system: CCIR standard, PAL colour
Power requirements: DC: 7.2 V (battery operation)
DC: 8.4 V (AC adaptor operation)
Power consumption: 11.5 W (with LCD panel ON)
Operating temperature: 0 °C~40 °C (32 °F~104 °F)
Storage temperature: -20 °C~60 °C (-4 °F~140 °F)
Tape speed: 28.2 mm/sec. (DVCAM mode)
LCD screen: 5.5-inch
Mass: 970 g (2 lb 2 oz)
(without a tape and battery)
Dimensions: 148 (W) × 62 (H) × 135 (D) mm
(5 7⁄8 × 2 1⁄2 × 5 3⁄8 inches)

VIDEO
Video Input/Output:
Composite (RCA phono jack x1):
1.0 Vp-p, 75 Ω, unbalanced, sync negative
S-Video (Mini-DIN 4-pin x1):
Y : 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C : 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced
Digital Input/Output:
i.LINK (DV In/Out) 4-pin jack (x1), IEEE1394-based

AUDIO
Audio signals: Recording: 48 kHz/16-bit, 32 kHz/12-bit,
Playback: 48 kHz/16-bit, 32 kHz/12-bit,
32 kHz/16-bit, 44.1 kHz/16-bit
Audio Input/Output: RCA phono jack (2) (L, R):
-7.5 dBs, (0 dBu=0.775 Vrms)

OTHER CONNECTORS
LANC: Stereo mini-mini jack
Headphone: Stereo mini jack 8Ω
Camera/Editor connector:
20-pin

–21–
 2-1 DVCAM VTRs
DRV-1000P
DVCAM Drive
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Designed to
VIDEOCASSETTE
RECORDERS

fit in a standard 5.25-inch disk drive PC bay •i.LINK (DV

In/Out) interface providing a single cable connection to
simultaneously transfer data and control signals as well as
digital video and audio signals, with virtually no generation
loss •LANC interface for simple editing with a LANC-
equipped recorder or editing system •Analogue video and
audio outputs •DC power operation

SPECIFICATIONS
GENERAL
Mass: Approx. 1.4 kg (3 lb 1 oz)
Dimensions: 149.2 (W) × 42.8 (H) × 225 (D) mm
(5 7/8 × 1 11/16 × 8 7/8 ) inches
Maximum Dimensions (unload):
149.2 (W) × 68.0 (H) × 305 (D) mm
Power Requirement: +5 V: 5 A (Max) /700 mA (Stop)
+12 V: 0.8 A (Max) /130 mA (loading/unloading)
Power Consumption: +5 V: 25 VA (Max)
+12 V: 9.6 VA (Max)
Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Storage Temperature: -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Tape Speed: 28.2 mm/s (DVCAM mode)

VIDEO
Video Signal: CCIR standards, PAL colour
Video Output: Composite (RCA pin):
1.0 Vp-p, 75 Ω, unbalanced, sync negative
S-video (mini-DIN 4-pin):
Y: 1.0Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced

AUDIO
Audio Signals: 48 kHz/16-bit, 32 kHz/12-bit, 32 kHz/16-bit
44.1 kHz/16-bit (depending on input signals)
Output: PIN jacks (2) (L, R)
Output Level: 327 mV with 47 kΩ load or more
Impedance: 2.2 kΩ
Digital IN/OUT: i.LNIK (DV IN/OUT), IEEE1394-based, 4-pin (1)
Other Connectors: LANC: stereo mini-mini jack
EJECT: monaural mini jack, TTL input
low active (more than 100ms)
DC IN: PC-standard, +5 V/12 V/GND
Supplied Accessories: Operation manual (1)
DV cable (4p - 4p, 50 cm)
Stereo AV cable (1)
S video cable (1)
Mounting Screw ( 4)

–22–
2-2 DVCAM VTR accessories

DSBK-100P
SDI Output Board (for DSR-60P)
•When installed in the DSR-60P, this board
enables digital video and audio signals in

VIDEOCASSETTE
RECORDERS
the D1 format to be output to other SDI
equipped devices such as Digital
BETACAM and Betacam SX •Conforms to
Serial Digital Interface (270 Mb/s), ITU-R
BT.656

Connector: Output : BNC (2)

DSBK-110P
QSDI Output Board for (DSR-60P)
•When installed in the DSR-60P, this board
enables SDTI (QSDI)-format digital video,
audio and time code signals to be transferred
to other SDTI (QSDI) equipped devices such
as the DSR-2000P, DSR-80P, DSR-85P or
EditStation •Conforms to SDTI (QSDI) format
(270 Mb/s)

Connector: Output : BNC (1)

DSBK-120P
SDI Input/Output Board
(for DSR-80P and DSR-85P)
•When installed in the DSR-80P or DSR-
85P, this board enables digital video and
audio signals in the D1 format to be input to
the unit and output from other SDI equipped
devices such as Digital BETACAM and
Betacam SX
•Conforms to Serial Digital Interface (270
Mb/s), ITU-R BT.656

Connector: Input : BNC (2)

Output : BNC (2)

DSBK-130P
Time Code Input/Output Board
(for DSR-60P, DSR-80P and
DSR-85P)
•When installed in the DSR-60P, DSR-80P
or DSR-85P, this board enables EBU-format
time code to be input to the unit and output
from other equipment

Connector: Input : BNC (1)

Output : BNC (1)

–23–
 2-2 DVCAM VTR accessories
Connector: Input/Output : 6-pin (1)
DSBK-140 Supplied accessories:
i.LINK/DV Input/Output Board DV Cable : 6-pin-4-pin
(1 m/3.3 ft) (1)
(for DSR-70P) DV Cable : 6-pin-6-pin
VIDEOCASSETTE

This board enables frame accurate editing (35 cm/1.1 ft) (1)
RECORDERS

between the DSR-70P and a consumer DV Connector Cap (1)

camcorder*1 or between two DSR-70P units Operation Manual
via i.LINK interface. This i.LINK interface
treats compressed DV audio/video and
control signals, which allow the single cable
connection with no deterioration of video
and audio quality.
*1 Sony DV camcorders only

Connector: Input : BNC (1)

DSBK-150 Output : BNC (1)
SDTI (QSDI) Input/Output Board Supplied accessories:
Connector Cap (2)
(for DSR-70P) Operation Manual
This board enables a direct digital
connection with other SDTI (QSDI)
equipped machines such as the
DSR-2000P/85P/80P/60P DVCAM VTRs
and EditStation systems. This interface also
allows source material to be dubbed and
edited with no deterioration of video and
audio quality.

Connector: Input : BNC (1)

DSBK-160 Output : BNC (2)
SDI Input/Output Board Supplied accessories:
Connector Cap (3)
(for DSR-70P) Operation Manual
This board enables a digital connection with
a DNW-A25 Betacam SX portable editing
recorder or other SDI-equipped machines.
When the DSR-70P is connected with
DNW-A25P, not only DVCAM-to-Betacam
SX editing, but Betacam SP-to-DVCAM
editing is also available because of the
analogue playback capability of the DNW-
A25P.

DSBK-170
Analogue Component
Input/Output Board
(for DSR-70P)
This board enables analogue component
signals to be used to work with the
conventional analogue component editing
systems.

Connector: Input/Output : BNC (3)

(selectable by switching)
Supplied accessories:
Connector Cap (3)
Operation Manual

–24–
2-2 DVCAM VTR accessories

DSBK-180P
Dual Video Input Board
(for DSR-70P)

VIDEOCASSETTE
This board enables two cameras to be

RECORDERS
connected to the DSR-70P via analogue
composite with reference video signal. The
output of either one is selected to be
recorded.

Supplied accessory: Operation Manual

Connector: Input/Output: 6-pin (1)

DSBK-190 Supplied accessories:
i.LINK/DV Input/Output Board Connector cap (1)
Operation manual
(for DSR-2000P)
This board enables frame accurate editing *1 Sony DV camcorders only
between the DSR-2000P and the
DSR-500WSP DVCAM Camcorder,
DSR-70P DVCAM Portable Editing
Recorder or a consumer DV camcorder*1
via i.LINK interface.
This i.LINK interface treats compressed DV
audio/video and control signals, which allow
the single cable connection with no
deterioration of video and audio quality.

DSBK-200
Control Panel (for DSR-2000P)
Designed to remotely control the
DSR-2000P from a distance of up to 10
metres (approx. 33 ft.).

DSRM-10 Specifications
Power requirements: DC 5 V (supplied from the
Remote Control Unit connected VTR)
•Designed to remotely control the Power consumption: 50 mW
DSR-85P/80P/60P •Provides wired remote Remote control: Stereo mini-plug (with
control operation for attached cable, length 3 m
STOP/REC/PAUSE/REW/PLAY/FFWD (10ft))
Dimensions: 90 (w) × 46 (h) × 182 (d)
•JOG/SHUTTLE operation •Enables ±16
mm
times normal speed in search operation (35/8 × 113/16 × 71/4 inches)
Mass: Approx. 360 g (12oz)
Supplied accessory: Operating instructions

–25–
 2-2 DVCAM VTR accessories

DSRM-20 Specifications
Power requirements: DC 5 V (supplied from the
Remote Control Unit DSR-40P)
•Designed to remotely control the DSR-40P Power consumption: 50 mW
•Provides wired remote control operation for Remote control: Stereo mini-plug (with
VIDEOCASSETTE
RECORDERS

STOP/REC/PAUSE/REW/PLAY/FFWD attached cable, length 3 m

•JOG/SHUTTLE operation (10 ft))
Dimensions: 90 (w) x 46 (h) x 182 (d) mm
•Enables ±17 times normal speed in search
(3 5/8 x 1 13/16 x 7 1/4
operation inches)
•Index/Date/Photo search function Mass: Approx. 360 g (12 oz)
•Displays tape information during playback Supplied accessories:
when using the tape recorded on the Operating instructions
DSR-200AP/PD100AP/PD1P DVCAM
Camcorders.

Supplied accessories:
UVR-60P Remote control cable (5 m)
TBC Remote Controller Rack mount bracket
•Designed to control the built-in TBC for Blank panel
DSR-2000P/85P/80P/60P •19-inch rack Screw
mountable: Can be installed individually with Operation manual
the supplied blank panel or with another
UVR-60P

Power requirements:
DC 12 V, 9 V (supplied from VTR)
Power consumption:
840 mW
Mass: 1.3 kg (2 lb 13 oz)
Dimension: 215 (W) × 44 (H) × 101 (D) mm
(81/2 × 13/4 × 4 inches)

RMM-130
Rack Mount Kit
•Designed for use in mounting the
DSR-2000P/85P/80P/60P into 19-inch rack

BKNW-121
Control Panel Case
Case for the DSBK-200 Control Panel

–26–
2-2 DVCAM VTR accessories

BKNW-225
Docking Kit
This docking kit enables two DSR-70P units
or the DSR-70P and DNW-A25P to be

VIDEOCASSETTE
RECORDERS
docked together. This configuration
provides VTR-to-VTR editing with
Jog/Shuttle dial operation.

Supplied accessories:
Carrying Handle (1)
BNC Cable (34 cm/1.1 ft) (1)
9-pin Remote Cable
(34 cm/1.1 ft) (1)
Joint Panels with Screws (3)

LC-DN220
Carrying Case (Hard type)
•Carrying case for two DSR-70P units or
the DSR-70P and DNW-A25P

DSRM-E1P
Edit Adaptor
•Direct connection to the DSR-V10P via a 20-pin
connector •Controls LANC VTRs as players (DSR-
PD1P/ DSR-20P/ DSR-30P) •Built-in Jog/Shuttle dial
•Assemble editing with up to 99 events x 4 programmes

GENERAL
Power requirements: DC:7.2 V (supplied from the DSR-V10P)
DC:8.4 V (AC adaptor operation)
Power consumption: Approx. 1.8 W
Operating temperature:
0 °C to 40 °C (32 °F~104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F~140 °F)
Mass: Main Unit: 160 g (5.6 oz)
Controller: 340 g (12 oz)
Dimensions:
Main Unit: 134.4 (W) × 69.2 (H) × 60.6 (D) mm
(5 3⁄8 × 2 3⁄4 × 2 1⁄2 inches)
Controller: 128.1 (W) × 184 (H) × 42 (D) mm
(5 1⁄8 × 7 1⁄4 × 1 11⁄16 inches)
CONNECTORS
DSR-V10P: 20-pin
Control Unit: Mini DIN 8-pin
LANC: Stereo mini-mini jack
MONITOR OUTPUT
Video Output: Composite (RCA phono jack (1)):
1.0 V p-p, 75 Ω, unbalanced, sync
negative
Audio Output: RCA phono jack (2) (L, R):
327 mV, impedance 470 Ω or less

–27–
 2-2 DVCAM VTR accessories

CVX-V1P
Colour Video Camera
•Thumb-sized and lightweight (Camera head: 25 g, CCU:
VIDEOCASSETTE

135 g) •1/4-inch CCD Camera (470k pixels) •Directly

RECORDERS

attached to the Video Walkman 20-pin connector (via the

supplied Video Walkman Attachment) •F1.8/f=3.9mm lens
with manual focus/iris •Cable length : 2m

Supplied Accessories: Video Walkman Attachment Unit

Operating Instruction Manual

GENERAL
Video signal: CCIR standards, PAL colour
Power requirements: DC: 7.2V (battery operation)
DC: 8.4V (AC adaptor operation)
Power consumption: 1.8 W
Operating temperature: 0°C~40°C (32°F~104°F)
Storage temperature: -20°C~60°C (-4°F~140°F)
Mass: Camera Unit: 25 g (0.85 oz)
CCU: 135 g (4.8 oz) (without a battery)
Dimensions: Camera head: 22 (W) × 18 (H) × 60 (D) mm VIDEO
(14⁄16 × 23⁄32 × 2 3⁄8 inches) Video Output (on CCU):
CCU: 35 (W) × 110 (H) × 60 (D) mm Composite (RCA pin(1))
(1 7⁄16 × 4 3⁄8 × 2 3⁄8 inches) 1 V p-p, 75 Ω, unbalanced, sync negative
S-Video (Mini DIN 4-pin(1))
CAMERA Y : 1 Vp-p, 75Ω, unbalanced, sync negative
Image device: 1/4 inch Interline Transfer CCD C : 300 m Vp-p (subcarrier burst), 75Ω, unbalanced
Picture elements: Total: 470k
Effective: 440k AUDIO
Lens: F1.8 Audio Input/Output (RCA phono jack (2)(L, R)):
Focal length: f=3.9mm (35mm conversion : 38mm) -7.5 dBs, (0 dBs=0.775 Vrms)
Minimum illumination: 2 lux
Gain selection: AUTO/Hold OTHER CONNECTORS (on CCU)
White balance: AUTO/Hold External mic IN: Stereo mini-mini jack(1)
Shutter speed: AUTO,1/50,1/120,1/250,1/500,1/2000,1/10000 Multi connector: 20 pin(1)
Battery connector

CVX-V3P
Colour Video Camera
•Small and lightweight (Camera head: 75 g, CCU: 135 g)
•1/4-inch CCD camera (470k pixels) • x3 Zoom lens •Built-in
stereo microphone •Splash-proof camera head •Directly
attached to the Video Walkman 20-pin connector (via the
supplied Video Walkman Attachment) •Cable length : 2m
Supplied Accessories: Video Walkman Attachment Unit
Operating Instruction Manual

GENERAL
Video signal system: CCIR standards, PAL colour
Power requirements: DC: 7.2 V (battery operation)
DC: 8.4 V (AC adaptor operation)
Power consumption: 1.8 W
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Storage temperature: -20°C ~ 60°C (-4°F ~ 140°F)
Mass: Camera head: 75 g (2.6 oz)
CCU: 135 g (4.8 oz)(without a battery)
Dimensions: Camera head: 36 (W) x 40 (H) x 70 (D) mm
(1 7/16 × 1 5/8 × 2 7/8 inches)
VIDEO
CCU: 35 (W) × 110 (H) × 60 (D) mm
Video Output (on CCU):
(1 7/16 × 4 3/8 × 2 3/8 inches)
Composite (RCA pin(1))
1 V p-p, 75 Ω, unbalanced, sync negative
CAMERA
S-Video (Mini DIN 4-pin(1))
Image device: 1/4-inch Interline Transfer CCD
Y : 1 Vp-p, 75 Ω, unbalanced, sync negative
Picture elements: Total: 470k
C : 300 m Vp-p (subcarrier burst), 75 Ω, unbalanced
Effective: 440k
Lens F 2.8~4
AUDIO
Focal length: f=3.5 mm ~10.5 mm
Audio Input/Output (RCA phono jack (2)(L, R)):
(35 mm conversion : 35mm ~ 105mm)
-7.5 dBs, (0 dBs=0.775 Vrms)
Minimum illumination: 5 lux
Gain selection: AUTO
OTHER CONNECTORS (on CCU)
White balance: AUTO
External mic IN: Stereo mini-mini jack(1)
Multi connector: 20 pin(1)
Battery connector

–28–
2-2 DVCAM VTR accessories

CVX-V18NSP
Colour Video Camera
•NightShot™ function which enables recording in 0 lux

VIDEOCASSETTE
conditions •1/4-inch precision CCD •Independent camera

RECORDERS
head and compact CCU •CCU directly attachable to the
DSR-V10P DVCAM Video Walkman® •Built-in 18x zoom lens
•Manual camera controls via CCU: Focus, Shutter speed,
Exposure •Date/Time or Title superimposed onto image
•SteadyShot® •Long-life lithium-ion battery system
Supplied accessories: Walkman attachment unit
Operation manual

Optional accessories: NP-F530/F550/F730/F750/F930/F950 Rechargeable

Battery Pack
AC-V700 AC Adaptor/Charger
AC-VQ800 AC Adaptor/Charger
DC-V700 DC Adaptor/Charger
DC-VQ800 DC Adaptor/Charger
CCN-10 Camera Cable (10 m)

Specifications
GENERAL
Video signal: CCIR standards, PAL colour
Power requirements: DC: 7.2 V (battery operation)
DC: 8.4 V (AC adaptor)
Power consumption: 2.2 W (using the IR light, 3.2 W)
Operating temperature: 0 °C to 40 °C (32 ˚F to 104 ˚F)
Storage temperature: -20 °C to 60 °C (-4 ˚F to 140 ˚F)
Mass: Camera Unit: 343 g (12 oz)
CCU: 153 g (5 oz)(without a battery)
Dimensions: Camera head: 63(W) × 66(H) × 115(D) mm
(2 1/2 × 2 5/8 × 4 5/8 inches)
CCU: 50(W) × 59(H) × 110(D) mm
(2 × 2 3/8 × 4 3/8 inches)

CAMERA
Image device: 1/4-inch Interline Transfer CCD
Picture element: Gross: 570 k
Actual: 360 k
Lens: F1.4
Focal length: f=4.1~73.8 (35 mm conversion: 41~738 mm)
Filter diameter: ø37 mm
Focus: Auto, Manual, Infinity
Minimum illumination: 0.7 lux
Shutter speed: AUTO, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/125,
1/150, 1/215, 1/300, 1/425, 1/600, 1/1000, 1/1250,
1/1750, 1/2500, 1/3500, 1/6000, 1/10000
NightShot: IR light effective distance: 20 m (w/ slow shutter ON)
5 m (w/o slow shutter)

VIDEO
Video Output (on CCU):
Composite (x1) (RCA pin):
1.0 V p-p, 75 Ω, unbalanced, sync negative
YC (x1) (Mini DIN 4-pin):
Luminance signal: 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
Chrominance signal: 300 mVp-p (subcarrier burst),
75 Ω, unbalanced

AUDIO
Audio Output (on CCU): RCA pin jack (2)(L & R): -7.5 dBs
(0 dBs=0.775 Vrms)

OTHER CONNECTORS (on CCU):

External Mic IN: Stereo mini jack (plug in power)
Multi connector: 20-pin(connecting to Video Walkman)
Camera cable connector: 12-pin(connecting to camera head cable)
Battery connector

–29–
 3-1 S-VHS VTRs

SVO-5800P 6
Editing Recorder
•Superb picture quality with S-VHS recording format and high
VIDEOCASSETTE

quality signal processing techniques such as Digital Noise

RECORDERS

Reducer, Digital Field Dropout Compensator, Digital 3-line

Comb Filter and newly developed Chroma Process
Improvement •Built-in Time Base Corrector •Four channel
audio recording system; two for Hi-Fi (AFM) and two for
normal longitudinal audio •Dolby B type Noise Reducer for
normal audio •Frame accurate full editing functions
(Assemble, video/audio insert and audio split) •Back space
editing capability •Built-in EBU standard LTC/VITC time code
generator/reader •Optional UVR-60P TBC Remote Controller
•Field freeze function with the optional UVR-60P or SVRM-
100A Remote Control Unit •RS-422A 9-pin
interface •Automatic edit select system •Automatic S-VHS
record mode •S-video signal IN/OUT •Composite video
signal IN/OUT •Y/R-Y/B-Y component video signal OUT with
the optional SVBK-170P Component Output Board •Built-in
character generator to display VTR status, time code, set-up
menu and error message •Quick and smooth picture search
up to 15 times normal speed in forward and reverse •User
friendly initial set-up menu for a variety of customized VTR
mode operations •Cue up point preset •Auto head cleaner
•Compact and lightweight (3 units high, approx 11.5 kg), 19-
inch rack mountable •Very low power consumption (60W)
Supplied accessories: AC power cord
Operation manual
Optional accessories: Component output board SVBK-170P
Remote control unit SVRM-100A
TBC remote controller UVR-60P
Rack mount kit RMM-980
Remote control cable RCC-5G/10G/30G
(5 m/10 m/30 m)
S-video cable SYC-2/5 (2 m/5 m)

Specifications
S/N ratio: More than 46dB (in S-VHS/VHS mode)
General
Mass: 11.5 kg (25 lb 6 oz) Audio
Dimensions: 425 (W) × 145 (H) × 457 (D) mm Input: Normal CH-1/2 (XLR): +4/0/–6dBm selectable, 600Ω,
(163/4 × 53/4 × 18 inches) balanced
Power requirements: AC 220 to 240V, 50Hz, 3 wire grounded receptacle Hi-Fi CH-1/2 (XLR): +4/0/–6dBm selectable, 600Ω,
Power consumption: 60W balanced
Operating temperature: 5 to 40˚C (41 to 104˚F) Output: Normal CH-1/2 (XLR): +4/0/–6dBm selectable at
Tape speed: 23.39 mm/s 600Ω load, low impedance, balanced
Tape format: S-VHS or VHS Hi-Fi CH-1/2 (XLR): +4/0/–6dBm selectable at 600Ω
F FWD and REW time: Approx. 2.5min (with SE-180) load, low impedance, balanced
Search speed (with optional SVRM-100A)*1: AUDIO MONITOR OUT (PIN): –5dBu, at 47kΩ load,
SHUTTLE: STILL, 1/10*2, 1/5, 1/2, 1, 2, 5, 15 times unbalanced
normal speed, forward and reverse HEAD PHONE OUT (STEREO PHONE):
JOG: Frame by frame, forward and reverse –50 to –18dBu at 8Ω load unbalanced
S/N ratio (Normal audio at 3% distortion, Dolby OFF):
Video More than 43dB
Video signal system: PAL (colour)/ CCIR (monochrome) Frequency response: Normal: 50Hz to 12kHz
Video recording system: Rotary two-head helical scanning FM system Hi-Fi: 20Hz to 20kHz
Input: REF VIDEO IN (BNC (2), loop-through): Dynamic range: More than 90dB (in Hi-Fi mode)
Black burst or 1.0Vp-p, 75Ω, unbalanced,
sync negative Others
COMPOSITE IN (BNC (2), loop-through): TIME CODE IN (BNC): 0dBu ±6dB, 10kΩ, unbalanced (0dBu=1.55Vp-p
1.0Vp-p, 75Ω, unbalanced, sync negative PULSE)
S-VIDEO IN (Mini DIN 4-pin): TIME CODE OUT (BNC): 0dBu ±3dB at 10kΩ load, unbalanced
Y; 1.0Vp-p, 75Ω, unbalanced, sync negative (0dBu=1.55Vp-p PULSE)
C; 0.3Vp-p (burst), 75Ω, unbalanced
Output: COMPOSITE OUT (BNC): 1.0Vp-p, 75Ω, Remote
unbalanced, sync negative TBC REMOTE: 15-pin multi
S-VIDEO OUT (Mini DIN 4-pin (2)): REMOTE: 9-pin multi, RS-422A standards
Y; 1.0Vp-p, 75Ω, unbalanced, sync negative WIRED SIRCS: Control-S (Power supplied type)
C; 0.3Vp-p (burst), 75Ω, unbalanced
*1 Without the SVRM-100A attached, search speed is conducted at ±15 times normal
COMPONENT OUT (BNC (3), with optional
speed by continuously pushing the F FWD or REW button.
SVBK-170P): *2 When controlled from an RS-422A equipped editing controller, the minimum search
Y; 1.0Vp-p, 75Ω, unbalanced, sync negative speed is achieved at ±1/20 times normal speed.
R-Y; 0.7Vp-p, 75Ω, unbalanced
B-Y; 0.7Vp-p, 75Ω, unbalanced
VIDEO MONITOR OUT (Super) (BNC):
1.0Vp-p, 75Ω, unbalanced, sync negative
Horizontal resolution: VHS: More than 240TV lines
S-VHS: More than 400TV lines

–30–
3-1 S-VHS VTRs

SVP-5600P 6
Editing Player
•Superb picture quality with S-VHS recording format and

VIDEOCASSETTE
high quality signal processing techniques such as Digital

RECORDERS
Noise Reducer, Digital Field Dropout Compensator, Digital
3-line Comb Filter and newly developed Chroma Process
Improvement •Built-in Time Base Corrector •Four channel
audio playback system; two for Hi-Fi (AFM) and two for
normal longitudinal audio •Dolby B type Noise Reducer for
normal audio •Built-in EBU standard LTC/VITC time code
reader •Optional UVR-60P TBC Remote Controller •Field
freeze function with the optional UVR-60P or SVRM-100A
Remote Control Unit •RS-422A 9-pin interface •S-video
signal OUT •Composite video signal OUT •Y/R-Y/B-Y
component video signal OUT with the optional SVBK-170P
Component Output Board •Built-in character generator to
display VTR status, time code, set-up menu and error
message •Quick and smooth picture search up to 15 times
normal speed in forward and reverse •User friendly initial
set-up menu for a variety of customized VTR mode
operations •Cue up point preset •Auto head cleaner
•Compact and lightweight (3 units high, approx 11.5 kg),
19-inch rack mountable •Very low power consumption (53W)
Supplied accessories: AC power cord
Operation manual
Optional accessories: Component output board SVBK-170P
Remote control unit SVRM-100A
TBC remote controller UVR-60P
Rack mount kit RMM-980
Remote control cable RCC-5G/10G/30G (5 m/10 m/30 m)
S-video cable SYC-2/5 (2 m/5 m)

Specifications S/N ratio (Normal audio at 3% distortion, Dolby OFF):

More than 43dB
General Frequency response: Normal: 50Hz to 12kHz
Mass: 11.5 kg (25 lb 6 oz) Hi-Fi: 20Hz to 20kHz
Dimensions: 425 (W) × 145 (H) × 457 (D) mm Dynamic range: More than 90dB (in Hi-Fi mode)
(163/4 × 53/4 × 18 inches)
Power requirements: AC 220 to 240V, 50Hz, 3 wire grounded receptacle Others
Power consumption: 53W TIME CODE OUT (BNC):
Operating temperature: 5 to 40˚C (41 to 104˚F) 0dBu ±3dB at 10kΩ load, unbalanced
Tape speed: 23.39 mm/s (0dBu=1.55Vp-p PULSE)
Tape format: S-VHS or VHS
F FWD and REW time: Approx. 2.5min (with SE-180) Remote
Search speed (with optional SVRM-100A)*1: TBC REMOTE: 15-pin multi
SHUTTLE: STILL, 1/10*2, 1/5, 1/2, 1, 2, 5, 15 times REMOTE: 9-pin multi, RS-422A standards
normal speed, forward and reverse WIRED SIRCS: Control-S (Power supplied type)
JOG: Frame by frame, forward and reverse

Video
Video signal system: PAL (colour)/ CCIR (monochrome)
Input: REF VIDEO IN (BNC (2), loop-through): Black burst
or 1.0Vp-p, 75Ω, unbalanced, sync negative
Output: COMPOSITE OUT (BNC): 1.0Vp-p, 75Ω,
unbalanced, sync negative
S-VIDEO OUT (Mini DIN 4-pin (2)):
Y; 1.0Vp-p, 75Ω, unbalanced, sync negative
C; 0.3Vp-p (burst), 75Ω, unbalanced
COMPONENT OUT (BNC (3), with optional
SVBK-170P):
Y; 1.0Vp-p, 75Ω, unbalanced, sync negative
R-Y; 0.7Vp-p, 75Ω, unbalanced
B-Y; 0.7Vp-p, 75Ω, unbalanced
VIDEO MONITOR OUT (Super) (BNC): 1.0Vp-p,
75Ω, unbalanced, sync negative
Horizontal resolution: VHS: More than 240TV lines
S-VHS: More than 400TV lines
S/N ratio: More than 46dB (in S-VHS/VHS mode)

Audio
Output: Normal CH-1/2 (XLR): +4/0/–6dBm selectable at
600Ω load, low impedance, balanced
*1 Without the SVRM-100A attached, search speed is conducted at ±15 times normal
Hi-Fi CH-1/2 (XLR): +4/0/–6dBm selectable at 600Ω
speed by continuously pushing the F FWD or REW button.
load, low impedance, balanced *2 When controlled from an RS-422A equipped editing controller, the minimum search
AUDIO MONITOR OUT (PIN): –5dBu, at 47kΩ speed is achieved at ±1/20 times normal speed.
load, unbalanced
HEAD PHONE OUT (STEREO PHONE): –50 to
–18dBu at 8Ω load unbalanced

–31–
 3-1 S-VHS VTRs

SVO-9620 (PAL/NTSC4.43) 6
Recorder
•High quality SVHS picture and sound •PAL/NTSC4.43
VIDEOCASSETTE

playback capability •Four channel audio recording system;

RECORDERS

two for Hi-Fi (AFM) and two for normal longitudinal audio
•Dolby B type Noise Reducer for normal audio •Auto head
cleaner to provide preventive care of the tape heads •Dial
menu operations via the search dial for a variety of
customized VTR mode settings •Recognizable colour
pictures over a range of -1/30 to +5 (-10 to +10 with the
optional DSRM-10) times normal speed in search mode;
frame by frame picture search with the JOG dial
•Programmed operation with MARK IN A and MARK IN B
•Timer Rec and Play function for unattended operations
•Sensor recording function •Audio dubbing function for
additional audio, such as music or narration, recording •Error
code and real time counter indication on the LED
display •Optional remote control unit of SVRM-100A and
RM-V200 •Optional interface: SVBK-100A for 33-pin
interface, SVBK-120 for RS-232C interface, and SVBK-140
for RS-422A 9-pin remote interface •Optional boards: SVBK-
150 Digital Noise Reducer, SVBK-160 Time Code Board,
SVBK-180P RS-232C Interface Board
Supplied Accessories: AC power cord
Instruction manual
Optional Accessories: 33-pin interface board SVBK-100
Computer interface board (RS-232C) SVBK-120
RS-422A interface board SVBK-140
Digital noise reducer SVBK-150
Time code board SVBK-160
RS-232C Interface board SVBK-180P
Remote control unit DSRM-10
Remote control unit RM-V200
Rack mount kit RMM-980

Specifications
Audio
General Input: Phono: –6dBu, 47kΩ, unbalanced
Mass: 14.0 kg (30 lb 14 oz) Output: Phono: –6dBu, 10kΩ, unbalanced
Dimensions: 424 (W) × 147 (H) × 452 (D) mm Monitor Output: Phono: –5dBu, 10KΩ
(163/4 × 57/8 × 177/8 inches) Frequency response: 50Hz to 12kHz (in normal mode)
Power requirements: AC 220 to 240V, 50/60Hz 20Hz to 20kHz (in Hi-Fi mode)
Power consumption: Less than 55W Dynamic range: 90dB (in Hi-Fi mode)
Operating temperature: 5 to 40°C (41 to 104°F)
REC/PB mode: SP Connectors
Tape Speed: SP: 23. 39mm/s Video: IN (1) with loopthrough out (BNC)
Tape format: S-VHS or VHS OUT (1) (BNC)
F FWD and REW time: Max. 2min (with SE-120) SYNC IN (1) (BNC)
Audio: Hi-Fi (AFM) IN (2) (Phono)
Video NORMAL IN (2) (Phono)
Video signal system: PAL and NTSC4.43 Colour Hi-Fi (AFM) OUT (2) (Phono)
Video recording system: Rotary two-head helical scanning FM system NORMAL OUT (2) (Phono)
Input: BNC: 1.0Vp-p, 75Ω, sync negative Monitor OUT (1) (Phono)
S-VIDEO: Mini DIN 4-pin S VIDEO: IN (1) (Mini DIN 4-pin)
Y: 1.0Vp-p, 75Ω, sync negative OUT (1) (Mini DIN 4-pin)
C: 0.3Vp-p, at burst level, 75Ω TV connector: OUT (1) (8-pin)
Output: BNC: 1.0Vp-p, 75Ω, sync negative
S-VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75Ω, sync negative
C: 0.3Vp-p, at burst level, 75Ω
Horizontal resolution: More than 400TV lines (S-VHS)
More than 240TV lines (VHS)
S/N ratio: 45dB (colour)

–32–
3-1 S-VHS VTRs

SVP-9020 (PAL/NTSC4.43) 6
Player
•High quality SVHS pictuer and sound •PAL/NTSC4.43

VIDEOCASSETTE
playback capability •Four channel audio playback system:

RECORDERS
two for Hi-Fi (AFM) and two for normal longitudinal audio
•Doldy B type Noise Reducer for normal audio •Auto head
cleaner to provide preventive care of the tape heads •Dial
menu operation via the search dial for a vairiety of
customize VTR mode setting •Recognizable colour pictures
over a range of/10to +10 times normal speed in search
mode;frame by frame pictuer search with the JOG dial
•Programmed operation with MARK IN A and MARK IN B
•TimerRec and Play function for nuattended operation •Error
code and real time counter indication on the LED display
•Optional remote contrrol unit of SVRM-100A and RM-V200
•Optional interface:SVBK-100 for 33-pin interface,
SVBK-120 for RS-232C interface, and SVBK-140 for
RS-422A 9-pin remote interface •Optional SVBK-160Time
Code Board and SVBK-180P RS-232C Interface Board

Supplied Accessories: AC power cord

Instruction manual
Optional Accessories: 33-pin interface board SVBK-100
Computer interface board (RS-232C) SVBK-120
RS-422A interface board SVBK-140
Digital noise reducer SVBK-150
Time code board SVBK-160 RS232C
Interface Board SVBK-180P
Remote control unit DSRM-10
Remote control unit RM-V200
Rack mount kit RMM-980

Specifications
General
Mass: 14.0 kg (30 lb 14 oz)
Dimensions: 424 (W) × 147 (H) × 452 (D) mm
(163/4 × 57/8 × 177/8 inches)
Power requirements: AC 220 to 240V, 50/60Hz
Power consumption: Less than 55W
Operating temperature: 5 to 40°C (41 to 104°F)
REC/PB mode: SP
Tape Speed: SP: 23.39mm/s
Tape format: S-VHS or VHS
F FWD and REW time: Max. 2min (with SE-120)

Video
Video signal system: PAL and NTSC4.43 Colour
Video recording system: Rotary two-head helical scanning FM system
Input: BNC: 1.0Vp-p, 75Ω, sync negative
S-VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75Ω, sync negative
C: 0.3Vp-p, at burst level, 75Ω
Output: BNC: 1.0Vp-p, 75Ω, sync negative
S-VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75Ω, sync negative
C: 0.3Vp-p, at burst level, 75Ω
Horizontal resolution: More than 400TV lines (S-VHS)
More than 240TV lines (VHS)
S/N ratio: 45dB (colour)

Audio
Output: Phono: –6dBu, 10kΩ, unbalanced
Monitor Output: Phono: –5dBu, 10KΩ
Frequency response: 50Hz to 12kHz (in normal mode)
20Hz to 20kHz (in Hi-Fi mode)
Dynamic range: 90dB (in Hi-Fi mode)

Connectors
Video: OUT (1) (BNC)
SYNC IN (1) (BNC)
Audio: Hi-Fi (AFM) IN (2) (Phono)
NORMAL IN (2) (Phono)
Monitor OUT (1) (Phono)
S VIDEO: OUT (1) (Mini DIN 4-pin)
TV connector: OUT (1) (8-pin)

–33–
 3-2 S-VHS VTR accessories
Connector: 33-pin multi connector (1)
SVBK-100 Parallel control signal
Sony 33-pin Interface Board Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(for SVO-9620/9500MDP and (65/8 × 35/8 × 23/8inches)
Mass: 330 g (11 oz)
VIDEOCASSETTE

SVP-9020)
RECORDERS

•When this board installed, VTR functions

can be remotely controlled via 33-pin
parallel interface

Connector: 34-pin multi connector (1)

SVBK-110 Parallel control signal
Sony 34-pin Interface Board Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(for SVO-9500MDP) (65/8 × 35/8 × 23/8inches)
•When this board installed, the Mass: 300 g (11 oz)
SVO-9500MDP can be integrated into the
34-pin based control system

Connector: D-sub 25-pin multi connector (1)

SVBK-120 Parallel control signal
Computer Interface Board Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(for SVO-9620/9500MDP and (65/8 × 35/8 × 23/8inches)
Mass: 300 g (11 oz)
SVP-9020)
•Provides RS-232C interface which
enables direct control of a VTR from an
external computer

Input/output connector:
SVBK-140 TC IN: BNC (1)
Sony RS-422A Interface Board 0dB∫6dB (0dB=1.55Vp-p)
for SVO-9620 and SVP-9020 10kΩ, unbalanced
TC OUT: BNC (1)
•By installing this board, the SVO-9620/ 0dB∫3dB, low impedance,
SVP-9020 can be equipped with 9-pin unbalanced
MONITOR OUT: BNC (1)
REMOTE (RS-422A) interface to be
Supplied accessories: Screw
configured into Sony’s 9-pin based control Operation manual
system

–34–
3-2 S-VHS VTR accessories
Dimensions: 318 (W) × 106 (H) × 26 (D) mm
SVBK-150 (125/8 × 41/4 × 11/16 inches)
Sony Digital Noise Reducer Board Mass: 370 g (13 oz)
(for SVO-9620 and SVP-9020) Supplied accessories:
•Reduces both Y (luminance) and C Operation manual

VIDEOCASSETTE
RECORDERS
(chrominance) noise with its YNR (noise
reducer) and CNR
•Provides Y Enhance function, TBS (Time
Base Stabilizer), and Field dropout
compensation

Applicable time code:

SVBK-160 SMPTE or EBU longitudinal time
Sony Time Code Board code (LTC)
(for SVO-9620 and SVP-9020) Drop frame (NTSC mode only):
•Attaches to the SVBK-140 RS-422A Drop frame or non-drop frame
selectable
Interface Board
Dimensions: Board:
•When this board installed, the VTR can 118.5 (W) × 85 (H) × 10 (D) mm
record (SVO-9620 only) and read the EBU (43/4 × 33/8 × 13/32 inches)
time code Panel:
•Consists of the following components: 85 (W) × 52.5 (H) × 13 (D) mm
TC-69 board/Switch panel/Flat cable (33/8 × 21/8 × 17/32 inches)
Mass: Board: 80 g (2.8 oz)
Panel: 70 g (2.5 oz)

SVBK-170P
Component Output Board
(for SVO-5800P/SVP-5600P)
•When this board is installed, the VTR can
output component video signal
(Y/R-Y/B-Y), which conforms to the
Betacam SP format

Dimensions: 177 (W) × 105 (H) × 20 (D) mm

(7 × 41/4 × 3/32 inches)
Mass: 120 g (4.2 oz)

Connector: RS-232C I/F: D-sub 25-pin (1)

SVBK-180P Time Code out: BNC (1)
RS-232C Interface Board Time Code in: BNC (1)
(for SVO-9620 and SVP-9020) Monitor out: BNC (1)
•Provides an RS-232C interface which Dimensions: Board: 62 (W) × 115 (H) × 361 (D) mm
(21/2 × 5/8 × 141/4 inches)
enables direct control of a VTR from an
Rear panel: 85 (W) × 52.5 (H) × 13 (D) mm
external computer •Incorporates an EBU (33/8 × 21/8 × 17/32 inches)
standard time code generator/reader •Built-
in editing capability (insert/assemble) •Built-
in intelligence to support frame by frame
editing capability •Capable of changing its
communication protocol to the same as that
of the SVBK-120 Interface Board

–35–
 3-2 S-VHS VTR accessories

SVRM-100A Specifications
Remote Control Unit Power requirements: DC 5V (supplied from the VTR)
(for SVO-5800P, SVP-5600P and Power consumption: 40 mW
Remote control: Stereo mini plug
VIDEOCASSETTE

SVO-9500MDP)
RECORDERS

•Provides wired remote control operation for

Control signal: Control S
STOP/REC/PAUSE/REW/PLAY/FFWD Dimensions: 90 (W) × 39 (H) × 182 (D)
•JOG/SHUTTLE operation •Enables ±10 mm
times normal speed in search operation (35/8 × 19/16 × 71/4 inches)
•Field freeze operation for SVO-5800P/ Mass: 250 g (8.8 lb)
SVP-5600P

Features especially for the

SVO-9500MDP
•Index search function •Three freeze mode:
frame freeze, first field freeze and second
field freeze

Specifications
DSRM-10 Power requirements: DV 5V (supplied from the
Remote Control Unit connected VTR)
•Designed to remotely control the Power consumption: 50mW
SVO-9620/SVP-9020 Remote control: Stereo mini-plug
•Provides wired remote control operation for (with attached cable, length
STOP/REC/PAUSE/REW/PLAY/FFWD 3m (10ft))
Dimensions: 90 (W) × 46 (H) × 182 (D) mm
•JOG/SHUTTLE operation
(3 5⁄8 × 1 13⁄16 × 7 1⁄4 inches)
•Enables ±16 times normal speed in search Mass: Approx. 360 g (12oz)
operation Supplied accessory: Operating instructions

–36–
3-3 VHS VTR

SVO-1320P
VHS Videocassette Recorder
•HQ circuitry and Double Azimuth PRO 4-head design for

VIDEOCASSETTE
superb resolution and excellent colour reproduction •Auto

RECORDERS
repeat playback capability •Sequential playback by several
VTRs via Control S •One-time playback capability •NTSC
4.43 playback capability for playback of materials recorded
on the NTSC system •Dual Mode Shuttle (DMS) control •Key
inhibit function to prevent accidental operation •Foot switch
control and Rec Tally out •Index search •Control S terminals
for remote control •BNC terminals •Digital auto tracking •Auto
head cleaner •Hook hole for security •Supplied wireless
remote commander RMT-V191B for remote operation
Supplied accessories: Wireless Remote Commander RMT-V191B (1)
Size AA batteries (2)
AC power cord (1)
Operation manual (1)

Specifications
General
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 14 W
Operating temperature: 5 to 40 °C (41 to 104 °F)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Mass: 5.6 kg (12 lb 5 oz)
Dimensions: 430 (W) × 100 (H) × 360 (D) mm
(17 × 4 × 14 1⁄4 inches)
Videocassette tape: E-180/240
Recording/Playback mode:
Recording SP/LP mode (PAL/MESECAM)
Playback SP/LP mode (PAL)
SP/EP mode (NTSC : 4.43)
Tape speed:
PAL SP mode: 23.39 mm/sec.
LP mode: 11.70 mm/sec.
NTSC 4.43 (Playback only)
SP mode: 33.35 mm/sec.
EP mode: 11.12 mm/sec.
Fast forward/Rewind time:
Approx. 2.5 min. (with E-180)

Video
Video signal: CCIR (monochrome) / PAL (colour)
Video recording system: Rotary two-head helical scanning system, FM
recording
Input: BNC (1) (rear): 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
Output: BNC (1) (rear): 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S/N ratio: 44 dB (SP mode)
Horizontal resolution: More than 240 lines (SP mode)

Audio
Audio recording system: Monaural
Input: PHONO (1) (rear) : -8 dBu, more than 47 kΩ
Output: PHONO (1) (rear) : -8 dBu, less than 10 kΩ
Frequency response: 50 Hz to 10 kHz (Monaural/SP mode)
Distortion: Less than 3.5 % (SP mode)

Other
Control S Input: Mini jack (1)
Control S Output: Mini jack (1)
Foot SW: Stereo Mini jack (1)

–37–
 3-3 VHS VTR
SVO-1520P
VHS Videocassette Recorder
•HQ circuitry and Double Azimuth PRO 4-head design for
superb resolution and excellent colour reproduction •VHS Hi-
VIDEOCASSETTE
RECORDERS

Fi stereo recording system •Auto repeat playback capability

•Sequential playback by several VTRs via Control S •One-
time playback capability •Power-on recording/ playback
capability for unattended automatic VTR operation •Sensor
recording capability •Audio dubbing function for the
application of adding narration to a programme afterwards
•NTSC 4.43 playback capability for playback of materials
recorded on the NTSC system (Monaural only) •Dual Mode
Shuttle (DMS) control •Key inhibit function to prevent
accidental operation •Foot switch control and Rec Tally out
•Index search •Control S terminals for remote control •BNC
terminals •MIC In terminal •Digital auto tracking •Auto head
cleaner •Hook hole for security •Supplied wireless remote
commander RMT-V191B for remote operation
Supplied accessories: Wireless Remote Commander RMT-V191B (1)
Size AA batteries (2)
AC power cord (1)
Operation manual (1)

Specifications
General
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 14 W
Operating temperature: 5 to 40 °C (41 to 104 °F)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Mass: 5.6 kg (12 lb 5 oz)
Dimensions: 430 (W) × 100 (H) × 360 (D) mm
(17 × 4 × 14 1⁄4 inches)
Videocassette tape: E-180/240
Recording/Playback mode:
Recording SP/LP mode (PAL/MESECAM)
Playback SP/LP mode (PAL)
SP/EP mode (NTSC : 4.43)
Tape speed:
PAL SP mode : 23.39 mm/sec.
LP mode : 11.70 mm/sec.
NTSC 4.43 (Playback only)
SP mode : 33.35 mm/sec.
EP mode : 11.12 mm/sec.
Fast forward/Rewind time:
Approx. 2.5 min. (with E-180)

Video
Video signal: CCIR (monochrome) / PAL (colour)
Video recording system: Rotary two-head helical scanning system, FM
recording
Input: BNC (1) (rear): 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
Output: BNC (1) (rear): 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
S/N ratio: 44 dB (SP mode)
Horizontal resolution: More than 240 lines (SP mode)

Audio
Audio recording system: Hi-Fi / Monaural
Input: PHONO (2) (L/R, rear) : -8 dBu, more than 47 kΩ
Output: PHONO (2) (L/R, rear) : -8 dBu, less than 10 kΩ
Frequency response: 20 Hz to 20 kHz (Hi-Fi mode)
Dynamic range: More than 86 dB (Hi-Fi mode)
Distortion: Less than 0.5 % (Hi-Fi mode)
Less than 3.5 % (Monaural/SP mode)
Other
Control S Input: Mini jack (1)
Control S Output: Mini jack (1)
Foot SW: Stereo Mini jack (1)

–38–
3-4 VHS VTR accessory

RM-V200
Wired/Wireless Remote Control Unit
•VTR operation: STOP/PLAY/REC/PAUSE/FWD SEARCH/REW SEARCH/FF/
REW/EJECT/POWER ON & OFF •High speed rewind button/ ×2speed playback/ frame

VIDEOCASSETTE
RECORDERS
advance operations for SVO-1500P •Either Control S or Control P control signal
selectable

Supplied accessories: Size AA battery (2)

Control S cable (3m)
Control P cable (1.5m)
Operation manual

Mass: 105 g (3 oz) excluding batteries

Dimensions: 65 (W) × 18 (H) × 150 (D) mm
(25/8 × 23/32 × 6 inches)
Power requirements: DC 3V
Operating temperature: 5 to 45°C (41 to 113°F)
Control signal: Control S (SIRCS)
Control P (Inverted SIRCS)

–39–
 3-5 VHS Hi-Fi Duplicators

SVO-965P 5 G
VHS Hi-Fi Duplicator
•Provides both recording and playback modes •High
VIDEOCASSETTE

cocentration of Silicon is incorporated in the lower drum for

RECORDERS

improved wear durability •Long-life video Hi-Fi head •High

quality picture and sound by wide video/audio track design
•Quality construction and durable mechanism for highly
reliable operation •Low power consumption of 25W
•Compact size and lightweight •Control P IN/OUT
connectors for loop-through connection •Loop-through
audio/video connectors for simpler system connection
•Control S IN connector for VTR operation checking
•Automatic check function for reliable recording results
(operated from SVRM-911/SVRM-960) •Data set function:
VTR ID SET, ID code REC ON/OFF, ID code display
ON/OFF, video AGC ON/OFF, audio limiter ON/OFF, Hi-Fi
REC ON/OFF etc. •Auto off function for technical difficulties
•Convenient front test terminals for easy technical testing
•Operation status indicator: TAPE RUN, REC, EJECT/
AUTO OFF
Supplied accessories: AC power cord
Instruction manual

Specifications
General
Mass: 7 kg (15 lb 7 oz)
Dimensions: 270 (W) × 132 (H) × 370 (D) mm
(103/4 × 51/4 × 145/8 inches)
Power requirements: AC 220 to 240V, 50/60Hz
Power consumption: 25W
Storage temperature: –20 to 60°C (–41 to 140°F)
Operating temperature: 5 to 40°C (41 to 104°F)
Tape speed: 23.39 mm/s (SP mode)
F FWD and REW time: Within 2.5min (with Sony E-180 tape)
Videocassette: VHS standard cassette tapes
System
Video signal system: CCIR standard/PAL colour
Video recording system: Rotary two-head Azimuth recording, VHS standard
Luminance: FM recording
Colour signal: Converted subcarrier phase shift
recording
Audio recording system: Hi-Fi audio: Rotary two-head helical scanning system
Normal audio: Stationary head
Video
Input: Composite video: BNC with loop-through output,
1Vp-p, 75Ω switchable, unbalanced, sync negative
Output: Composite video: BNC, 1Vp-p, 75Ω, unbalanced,
sync negative
Horizontal resolution: More than 240TV lines
S/N ratio: Better than 44dB
Audio
Input: SEPARATE/THROUGH switch selectable*
Hi-Fi (CH-1/CH-2): Phono (2)
Normal (CH-1/CH-2): Phono (2)
Audio level: –10dBu, 47kΩ, unbalanced
Output: Phono (2)
Audio level: –10dBu, 47kΩ, unbalanced
S/N ratio (Dolby off): 43dB (Normal audio)
Dynamic range: Better than 90dB (Hi-Fi audio)
Frequency response: Normal: 50Hz to 10kHz
Hi-Fi: 20Hz to 20kHz
Audio level adjustment: Manual (4ch)
Limiter on/off selectable (Normal audio)
Remote control
Control S: IN: Mini jack
Control P: IN: Phono
OUT: Phono

* When switch is in THROUGH position, loop-through output is available

–40–
3-5 VHS Hi-Fi Duplicators

SVO-915PL 5 G
VHS Hi-Fi Duplicator
•Provides recording mode only for large size duplication

VIDEOCASSETTE
system •High concentration of Silicon is incorporated in the

RECORDERS
lower head drum scanner for improved wear durability
•Long-life video/Hi-Fi head •Quality construction and durable
mechanism for highly reliable operation •High
quality picture and sound by wide video/audio track design
•Low power consumption of 25W •Compact and light-weight
•Control P IN/OUT connectors •Loop-through audio/video
connectors for simple system connection •Control S IN
connector for VTR operation checking •Data set function:
VTR ID SET, ID code REC ON/OFF, ID code display
ON/OFF,video AGC ON/OFF, audio limiter ON/OFF, Hi-Fi
REC ON/OFF, Dolby NR ON/OFF etc. •Auto off function for
technical difficulties •Convenient front test terminals for easy
technical testing •Operation status indicator: TAPE RUN,
REC, EJECT/AUTO OFF •Audio monitor out for checking the
audio recording level
Supplied accessories: AC power cord
Instruction manual

Specifications
General
Mass: 7 kg (15 lb 7 oz)
Dimensions: 270 (W) × 132 (H) × 370 (D) mm
(103/4 × 51/4 × 145/8 inches)
Power requirements: AC 220 to 240V, 50/60Hz
Power consumption: 25W
Storage temperature: –20 to 60°C (–41 to 140°F)
Operating temperature: 5 to 40°C (41 to 104°F)
Tape speed: 23.39 mm/s (SP mode)
F FWD and REW time: Within 2.5min (with Sony E-180 tape)
Videocassette: VHS standard cassette tapes
System
Video signal system: CCIR standard/PAL colour
Video recording system: Rotary two-head Azimuth recording, VHS standard
Luminance: FM recording
Colour signal: Converted subcarrier phase shift
recording
Audio recording system: Hi-Fi audio: Rotary two-head helical scanning system
Normal audio: Stationary head
Video
Input: Composite video: BNC with loop-through output,
1Vp-p, 75Ω switchable, unbalanced, sync negative
Horizontal resolution: More than 240TV lines
S/N ratio: Better than 44dB
Audio
Inputs: SEPARATE/THROUGH switch selectable*
Hi-Fi (CH-1/CH-2): Phono (2)
Normal (CH-1/CH-2): Phono (2)
Input level: –10dBu, 47kΩ, unbalanced
Outputs: Phono (2)
Output level: –10dBu, 47kΩ, unbalanced
S/N ratio (Dolby off): 43dB (Normal audio)
Dynamic range: Better than 90dB (Hi-Fi audio)
Frequency response: Normal: 50Hz to 10kHz
Hi-Fi: 20Hz to 20kHz
Audio level adjustment: Manual (4ch)
Limiter on/off selectable (Normal audio)
Remote control
Control S: IN: Mini jack
Control P: IN: Phono
OUT: Phono

* When switch is in THROUGH position, loop-through output is available

–41–
 3-5 VHS Hi-Fi Duplicators

System Configuration

• Controlled by the SVRM-901

VIDEOCASSETTE
RECORDERS

Video/Audio Distributor
VIDEO ex. DA-1400

AUDIO

Master VTR
ex. PVW-2600P

VIDEO AUDIO

Remote
Control Unit SVO-965P/915PL-1 SVO-965P/915PL-2 SVO-965P/915PL-3 SVO-965P/915PL-n**
SVRM-911*
CONTROL P

* RM-V200 Remote Control Unit can also be used for a

master remote control unit.
** Up to 2000 VTRs can be connected.

• Controlled by the SVRM-960 (SVO-965P only)

Video Monitor Video Monitor

Waveform Speaker
Monitor
Audio Amplifier

AUDIO OUT

SVAC-904*1 PX OUT
Bi-directional
Remote Control Panel VIDEO MONITOR OUT
PRINTER (CENTRONICS)
Printer
CONTROL PANEL (8-PIN) SVRM-960
Bi-directional
Remote Control Unit
AUX CONTROL (RS-232C)
CONTROL

AUDIO
VIDEO
RF

75Ω CONTROL switch OFF 75Ω CONTROL switch ON

Computer*1 OUT 


 
 

CONTROL IN 

VCS-1000 - 1 VCS-1000 - n*4/5
VIDEO Video Selector Video Selector
RF VIDEO
AUDIO
(L/R 2ch) OUT

IN
SVO-965P -1+SVBK-902*2/3 SVO-965P -2+SVBK-902 -------- SVO-965P - n-1+SVBK-902 SVO-965P -n*6+SVBK-902
AUDIO

AUDIO

AUDIO
VIDEO

VIDEO
VIDEO

OUT

VIDEO IN OUT IN

AUDIO
DA-1400 DA-1400
Video/Audio Distributor Video/Audio Distributor
Master VTR
ex. PVW-2600P

*1 VTR control can be operated either from the SVAC-904 or an external computer. *4 Set the 75Ω switch on the last VCS-1000 to ON.
*2 SVBK-902 Bi-directional Interface Board (optional) must be installed in the SVO-965P. *5 Up to 50 VCS-1000 can be connected.
*3 Set the 75Ω switch on all the SVBK-902 used in a system to OFF. *6 Up to 1000 VTRs can be connected.

–42–
3-6 Optional accessories for SVO-965P/915PL

SVRM-911
Serial Remote Control Unit
•Control P out connectors for controlling
entire duplication VTRs: up to 2,000 VTRs

VIDEOCASSETTE
RECORDERS
•System management capability
•VTR mode set up capability: VTR ID code
REC ON/OFF, video AGC ON/OFF, Hi-Fi
Audio ON/OFF, audio limiter ON/ OFF, etc.
•Auto Check function for examining secure
video/audio recording •Legible push-type
buttons •7-segment LED for ID display
•Built-in AC power supply •19-inch rack
mountable/2u size

RM-V200 (Wired only)

Remote Control Unit
•For simple control of one VTR
•Equipped with control P/S select switch
•Duplication control capability via control P
output

Mass: 8.0 kg (17 lb 10 oz)

SVRM-960 Dimensions: 424 (W) × 88 (H) × 350 (D) mm
Bi-directional Remote Control Unit (163/4 × 31/2 × 137/8 inches)
(for SVO-965P)
•Duplication VTR control capability: up to
1,000 VTRs
•Individual VTR status monitoring capability
•VTR mode set up capability: VTR ID code
REC ON/OFF, video AGC ON/OFF, Hi-Fi
Audio ON/OFF, audio limiter ON/ OFF, etc.
•Auto Check function for examining secure
video/audio recording
•RS-232C interface for computer control
operation

SVAC-904
Bi-directional Remote Control Panel
(for SVO-965P)
•To operate a duplication system with the
SVRM-960 Bi-directional remote control
unit

Mass: 0.8 kg (1 lb 12 oz)

Dimensions: 180 (W) × 53 (H) × 220 (D) mm
(71/8 × 21/8 × 83/4 inches)

–43–
 3-6 Optional accessories for SVO-965P/915PL

SVBK-902
Bi-directional Interface Board
(for SVO-965P)
•To enable two way communication
VIDEOCASSETTE
RECORDERS

between duplication VTRs and the

SVRM-960

SVBK-901
34-pin Parallel Interface Board
•To meet 34-pin based control system
•Control P serial control signal output
connector

SVCC-960
Automatic Cassette Changer
•Automatic cassette loading and ejecting for
efficient duplication operation: Up to 5
cassettes

SVAC-902
Cassette Holder
•To hold cassettes ejected by the
SVCC-960
•Using with the SVCC-960

–44–
3-6 Optional accessories for SVO-965P/915PL

SVAC-901
Audio Meter Unit
•For monitoring audio recording level

VIDEOCASSETTE
RECORDERS
SVAC-903
Audio Head Cleaner
•For cleaning a stationary audio head
in the SVO-965P/915PL

Optional Accessory Allocations

SVO-965P/915PL
Front Panel

SVAC-903
Audio
Head Cleaner
Audio Meter
SVAC-901

RM-V200 SVCC-960 SVAC-902

Serial Remote Cassette Changer

SVO-965P 34-pin Parallel Remote

Rear Panel
Serial Remote SVBK-901
911
SVRM-901
Bi-directional remote
SVBK-902

SVRM-960

SVAC-904

–45–
 4 Medical VTRs
VO-9600H
High-resolution B/W Videocassette Recorder
*Production of this product has been discontinued. For details, please consult your nearest
Sony office.
VIDEOCASSETTE

•High quality picture reproduction by utilizing the SP

RECORDERS

U-matic technology •Multiple scanning system for universal

applications •Clear still picture •REC standby function for
immediate recording operation •High speed picture search in
the range of ±30 times normal speed by a Search Dial
•Control S IN and Sony 33-pin remote interface to meet a
wide range of applications •Quick start function for
immediate VTR operation •Three video out connectors for
easy system expansion •Audio recording capability •Real
time counter •Compliance with medical safety regulations:
UL-544 and IEC-601-1
Supplied accessories: KSP-60 SP U-matic videocassette
Instruction manual
AC power cord

Specifications
General
Recording system: Two rotary heads helical scanning system
Scanning system (lines/Hz):
525/60, 625/50, 1023/60, 1049/60, 1125/60,
1249/50 selectable
Operating temperature: 5 to 40°C (41 to 104°F)
Power requirements: AC 220 to 240V
Power consumption: Less than 70W
Dimensions: 424 (W) × 192 (H) × 544 (D) mm
(163/4 × 75/8 × 211/2 inches)
Mass: 7.5 kg (16 lb 9 oz)

Video signal
Input: 1.0Vp-p, 75Ω (with termination switch),
sync negative
Output: 1.0Vp-p, 75Ω, sync negative
S/N ratio & Horizontal resolution:
46dB, 480 lines (525/60)
43dB, 480 lines (625/50)
46dB, 240 lines (1023/60)
46dB, 240 lines (1049/60)
46dB, 220 lines (1125/60)
43dB, 240 lines (1249/50)

Audio signal
Input (0dBu=0.775Vrms):
LINE IN: –10dBu, 47kΩ, unbalanced
MIC IN: –60dBu, 3kΩ, unbalanced
–10dBu, 47kΩ, unbalanced
Output (0dBu=0.775Vrms):
LINE OUT: –5dBu at 47kΩ, unbalanced
Headphones: –24dBu to –46dBu at 8Ω headphones
S/N ratio: 48dB
Frequency response: 50Hz to 15kHz

Tape transport
Tape speed: 9.53 mm/s
REC/PB time: 60min
Videocassette: KSP/KSP-S series videocassette

–46–
4 Medical VTRs

DSR-20MDP
DVCAM Recorder
•Superb picture quality of the DVCAM format •Playback

VIDEOCASSETTE
capability of DV recorded tapes (SP mode only) •Long

RECORDERS
recording time: up to 184 minutes with a standard-size
cassette and 40 minutes with a mini-size cassette •i.LINK
(DV In/Out) interface providing a single cable connection to
transfer digital video and audio with virtually no generation
loss •Foot switch control capability •LANC interface for
simple editing with a LANC-equipped recorder or editing
system •RS-232C and Control S interfaces for remote control
operation •Frame still picture •External Sync*1 In connector
for synchronised playback •Auto repeat function •Power-on
recording capabilities •Duplication mode with original time
code •Compact and lightweight (half-rack width) •AC/DC
operation*2 •Index Points search functions (when using a
cassette with IC Cassette Memory) •RMT-DS20 Wireless
Remote Controller (supplied accessory) for control of basic
functions •Compliance with the MDD (Medical Device
Directive)*3
*1 The DSR-20P locks to V-sync only.
*2 The DSR-20MDP can be used for outdoor operation, but is designed for stationary use.
Vibration resistance is not guaranteed.
*3 Medical safety regulation issued by the Commission of the European community

Supplied accessories: Wireless Remote Commander RMT-DS20 (1)

AC power cord (1)
Cleaning cassette (1)
Operation manual (1)

Optional accessories: Remote Control Unit DSRM-10

Foot Control Unit FS-20
DC power cord CCDD-X2

Specifications
GENERAL Audio outputs
Video signal standard: CCIR standard, PAL colour RCA pin (x2) (stereo L/R):
Power requirements: AC: 220 to 240 V, 50/60 Hz DC: 12 V 2 Vrms (full bit)
Power consumption: AC: 28 W DC: 2.0 A L: CH1, CH3 or CH1/3 mix
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F) R: CH2, CH4 or CH2/4 mix
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Mass: Approx. 5.0 kg (11 lb) Digital inputs/outputs
Dimensions: Approx. 212 (W) x 98 (H) x 395 (D) mm i.LINK (DV IN/OUT) (4-pin) (x1):
(8 3/8 x 3 7/8 x 15 5/8 inches) IEEE1394-based
(including external projections)
Tape speed: OTHERS
DVCAM mode: 28.221 mm/s LANC: Stereo mini-mini jack (1)
DV SP playback mode: 18.831 mm/s DC IN: 12 V XLR 4-pin (1)
Recording/Playback time: Control S: Stereo mini jack (IN) (1)
Standard cassette: 184 min. with a PDV-184ME/184N/184MEM Headphone jack: Stereo mini jack (1)
Mini cassette: 40 min. with a PDVM-40ME/40N/40MEM RS-232C: D-sub 9-pin, male (1)
Tape rewind time: Less than 2 min. with a PDV-184ME/184N/184MEM Foot Switch: Stereo Mini Jack (1)
Search speed (via RMT-DS20 or DSRM-10): Equal Potential Terminal: (1)
-2, -1, -1/5, -1/10, still, 1/10, 1/5, 1, 2, Cue/Review
(10 or 18 times)

SIGNAL INPUTS
Video Inputs
Composite (BNC x1)*: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
*Shared with the External Sync IN
S Video (4-pin Mini-DIN x1):
Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced

Audio Inputs
RCA pin (x2) (stereo L/ R):
2 Vrms (full bit)

Video outputs
Composite (BNC x1, BNC for monitor OUT x1):
1.0 Vp-p, 75 Ω, unbalanced, sync negative
S-Video (4-pin Mini-DIN x1):
Y: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced

–47–
 4 Medical VTRs

SVO-9500MDP 6
S-VHS Videocassette Recorder
•High quality picture and sound by S-VHS format and wide
VIDEOCASSETTE

video/audio track design •Digital Chroma Noise Reducer

RECORDERS

(CNR) to provide highly stable picture •Clear and crisp freeze

pictures in either frame or field mode thanks to
built-in digital frame memory •Quality construction and
durable mechanism for highly reliable operation •Quick
response mechanism for immediate operation •±10 times
picture search •Blank search function for quick searching of
blank part on the tape •Index search function for rapid point
location •Programmed operation •Tape remain indicator to
show the amount of tape remaining •Auto head cleaner
•Compact size and lightweight •Hi-Fi stereo audio recording
system •Hi-Fi ON/OFF switch •VTR mode setting menu
•SVRM-100A optional remote control unit •SVBK-100
33-pin interface board/SVBK-110 34-pin interface board/
SVBK-120 Computer interface board (RS-232C) for wide
system versatility •Compliance with medical safety
regulation: IEC-601-1
Supplied accessory: Instruction manual
Optional accesories: Remote control unit SVRM-100A
33-pin interface board SVBK-100
34-pin interface board SVBK-110
Computer interaface board SVBK-120
Indicator unit SVAC-100

Specifications
General
Video recording system: Two rotary heads helical scanning system
Video signal system: CCIR monochrome/PAL colour
Operating temperature: 5 to 40°C (41 to 104°F)
Power requirements: AC 220V/240V (selectable), 50/60Hz
Power consumption: Less than 64W
Dimensions: 270 (W) × 144 (H) × 370 (D) mm
(103/4 × 53/4 × 145/8 inches)
Mass: 12 kg (26 lb 7 oz)

Video signal
Input: BNC: 1.0Vp-p, 75Ω, sync negative
S-VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p, 75Ω
Output: BNC: 1.0Vp-p, 75Ω, sync negative
S-VIDEO: Mini DIN 4-pin
Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p, 75Ω
S/N ratio: Better than 45dB

Audio signal
Input: LINE IN: CH-1/CH-2: –10dBu, 47kΩ, unbalanced
Microphone: CH-2: –60dBu, 3kΩ, unbalanced
Output: LINE OUT: CH-1/CH-2: –10dBu, 47kΩ,
unbalanced
Monitor out: –5dBu, 47kΩ, unbalanced
S/N ratio: 40dB (standard)
Dynamic range: Better than 90dB (Hi-Fi)
Frequency response: 50Hz to 10kHz (standard), 20Hz to 20kHz
(Hi-Fi)

Tape transport
Tape speed: 23.39 mm/s
F FWD and REW time: 2.5min (E-180)
Videocassette: VHS standards cassette tapes

–48–
4 Medical VTRs

SVO-3500MDP
VHS Videocassette Recorder
•Reality Regenerator provides clearer, more accurate pictures

VIDEOCASSETTE
during playback •Picture capture function •APC (Adaptive

RECORDERS
Picture Control) optimizes both recording and playback •Dual
Mode Shuttle (DMS) control •High speed FF/Rewind •Control
S IN connector •Foot switch/Tally out •Index search function
•Auto head cleaner •Wireless remote commander
RMT-V191B is supplied •UL2601-1, EN60601-1 listed

Specifications
General
Mass: 4.3 kg (9 lb 7 oz)
Dimensions: 420(W) x 100(H) x 300(D) mm
(165⁄8 × 4 × 117⁄8 inches)
Power requirements: AC 120 V to 240 V, 50/60 Hz,
3 wire grounded receptacle

System
Video Signal: VHS PAL standard
Tape Speed: SP only
FF/Rew time: 90 s with E-180 tape

Video Input/Output
Video recording system: Rotary two-head helical scanning system
Input: BNC (1): 1.0 Vp-p, 75 Ω, unbalanced, sync negative
Output: BNC (1): 1.0 Vp-p, 75 Ω, unbalanced, sync negative
S/N Ratio: More than 44 dB (with high grade tape)
Horizontal resolution: 240 TV lines (colour)
350 TV lines (b/w)

Other
Control S IN: Mini jack, input (1)
Audio IN/OUT: RCA (1)
Foot SW/Rec Tally: Stereo mini pin (1)
MIC IN: Mini pin (1)
Print remote: Stereo mini pin (1)

–49–
 VIDEOCASSETTE
RECORDERS

–50–
 SECTION 2 VIDEO CAMERAS
1. Production video cameras/camcorders
DXC-D30P.............................................................52
DXC-D30WSP.......................................................53
DSR-130P .............................................................54
PVW-D30P ............................................................55
DSR-500WSP .......................................................56
DSR-300P .............................................................57
DSR-200AP...........................................................58
DSR-PD100P ........................................................59
DSR-PD1P ............................................................60

VIDEO CAMERAS
DXC-327BP series ................................................61
UVW-100BP ..........................................................62

2. Production camera accessories..............................64

3. Sensor video cameras

DXC-H10 ...............................................................79
DXC-LS1P.............................................................80
DXC-390P .............................................................81
DXC-9100P ...........................................................82
DXC-950P .............................................................83
DXC-107AP...........................................................84

4. Sensor camera accessories ....................................85

–51–
 1. Production video cameras/camcorders

DXC-D30P series
3-chip colour video camera
•Incorporates DSP(Digital Signal Processing) technology
based on the TruEye™ •Directly dockable to analogue
recorders (PVV-3P and EVV-9000P) •Directly dockable to
the DSR-1P DVCAM Digital Recorder •Compact size,
lightweight and low power consumption •High density three
2/3-inch IT Power HAD sensors and the new digital signal
processing circuits offer superior picture quality
VIDEO CAMERAS

— 850 TV lines of horizontal resolution

— Excellent signal-to-noise ratio of 61dB
— High sensitivity of F11.0 at 2000 lx
— Smear level -125dB Camera adaptor is optional
•TruEye Process realizes faithful color reproduction •High
degree of stability in video output (offered by DSP)
•Uniformity of picture tone among multiple DXC-D30P units
(offered by DSP) •Skin Detail with auto detection system of
Specifications
active area •Horizontal detail frequency control •Red vertical
detail correction •New DCC Plus function on the basis of General
DynaLatitude processing - for ideal video level distribution in Image device: 2/3≈inch Interline Transfer CCD (ç3)
795(H) ç 596(V) total picture elements
any situations •Clean Detail by DSP provides Black Halo-free
752(H) ç 582(V) effective picture elements
natural lines •Clear Scan function for shooting computer Built-in filters: 1: 3200K, 2: 5600K + 1/8ND, 3: 5600K,
displays without horizontal bands appearing across display 4: 5600K+1/64ND
screen •Hyper Gain mode provides the combined effect of Lens mount: Bayonet-mount
Video signal system: PAL standard
+30dB of electronic gain-up and +6dB of DPR (Dual Pixel Sync system: Internal or external with VBS or BS
Readout) under 1 lux illumination •DPR (Dual Pixel Readout) Horizontal resolution: 850TV lines
technology realizes noiseless picture even when gain value Minimum illumination: 0.5 lx with F1.4, Hyper Gain (DPR+30dB)
0.8 lx with F1.8, Hyper Gain (DPR+30dB)
is increased •TLCS (Total Level Control System) to ensure Sensitivity: F11.0 at 2000 lx (3200K, 89.9% reflectance)(typical)
the correct exposure even under/ over the limits of automatic Gain selection: ≈3dB, 0dB, +3dB, +6dB, +9dB, +12dB, +18dB,
iris control •Intelligent Auto Iris control function •EZ Mode * DPR+18dB, +24dB, * DPR+24dB,
and EZ Focus functions enable cameramen to get ready for Hyper Gain (* DPR+30dB)
S/N ratio: 61dB (typical)
shooting swiftly •Easy-to-use File Management System (Five Power requirements: DC12V
factory files and three user files available) •The 10-pin Power consumption: 12W (without VF/CA-537P)
REMOTE connector (RS-232C standard) allows control from Operating temperature: ≈10 to 45˚C (14 to 113˚F )
Mass: Approx. 2.3 kg (5 lb 1 oz, for camera head only)
external computers •ATW (Auto Tracing White Balance) Approx. 4.5 kg
function automatically adjusts white balance when lighting (9 lb 15 oz, with VF and lens, w/o lens hood)
conditions change •Programmable gain mode allows precise Inputs/outputs
INTERFACE: Pro 50-pin, Pro 76 pin DIGITAL
gain selection from 8 gain values •Three mode auto iris
VIDEO OUT: BNC type
system- STD (Standard), BACK L(Back Light) and SPOT LENS: 12-pin
L(Spot Light) •DCC (Dynamic Contrast Control) circuit can VF: DIN 8-pin, 20 pin
reproduce 600% dynamic range •Variable Speed Electronic REMOTE: 10-pin, stereo mini
MONITOR OUT: BNC type
Shutter •Clear Scan•Supplies a 1kHz audio reference signal
simultaneously with the colour bar signal •Date and time can * DPR = +6dB, DPR +18dB = +24dB, DPR+24dB = +30dB, DPR+30dB = +36dB
be superimposed on the video signal •Directly dockable with
DSR-1P DVCAM Digital Recorder (Refer to the description of DXC-D30PF1 DXC-D30PK1 DXC-D30PL1 DXC-D30PH
Camera head Yes Yes Yes Yes
the DSR-130P) •Directly dockable with the PVV-1AP/3P for
Camera handle Yes Yes Yes Yes
high quality component acquisition (Refer to the description
DXF-701WSCE Viewfinder Yes Yes Yes Option
of PVW-D30P) or with the EVV-9000P for handy operation External microphone Yes Yes Yes Not available
•Can be combined with the recorders from Panasonic or JVC VCT-U14 Tripod adaptor Yes Yes Yes Option
via the CA-512AP or CA-513 •When combined with CA- VCL-918BY Zoom lens Yes Yes Option Option
537P/327P, 26/14-pin connectors provides signal output in LC-421 Carrying case Yes Option Option Option
Y/R-Y/B-Y, VBS, Y/C and RGB forms for connection with RM-LG1 Logger Yes Yes Yes Option
various equipement •Can be connected with computer
Dimensions
equipment via CA-325A/325B camera adaptor •Adjustable
121 (4 7/8)

shoulder pad •Monitor out function

Supplied accessories: Wind screen
Lens mount cap
Chart for flange focal
Operating instructions 242 (9 5/8) 164 (6 1/2)
258 (10 1/4)
206 (8 1/8)

273 (10 3/4)

480 (19)

–52–
1. Production video cameras/camcorders

DXC-D30WSP
Wide-screeen switchable colour video camera
• Aspect ratio is switchable (16:9 wide screeen or 4:3) •All
the functions of the DXC-D30P are incorporated •Power HAD
WS CCD •16:9 ID information is included (DVCAM system
such as DSR-1/60/80 detects 16:9 ID and can record or play
back the 16:9 video signal)
Supplied accessories: Remote Control Unit RM-LG1
Viewfinder DXF-701WSCE (incl. Mic holder)

VIDEO CAMERAS
External microphone (incl. Mic. cable)
Wind Screen
Tripod adaptor VCT-U14
Angle plate for the DXC-D30WSP
Lens cap
*Camera adaptor is optional
Flange back chart
Operation manual for the DXC-D30P
Operation manual supplement for the DXC-D30WSP
ClipLink Guide

Specifications:
Image device: 3-chip 2/3-inch, Interline-Transfer CCD
Optics: F1.4 medium index prism system
980 × 582 (H × V)
Effective picture elements:
Total picture elements: 1038 × 594 (H × V)
Sensing area: 9.6 mm × 5.4 mm
Built-in filters: 1: 3200K/3000K
2: 5600K+1/8ND
3: 5600K
4: 5600K+1/64ND
Lens mount: Sony 2/3-inch Bayonet mount
Signal system: PAL colour system
Scanning system: 2:1 interlaced, 625 lines, 50 fields/s
Horizontal frequency: 15.625 kHz
Vertical frequency: 50 Hz
Sync system: Internal and External with the VBS or BS signal
Horizontal resolution: 16:9 mode: 700TV lines
4:3 mode: 700TV lines
Vertical resolution: 480TV lines (without EVS)
530TV lines (with EVS)
Minimum illumination: 0.5 lx with F1.4, Hyper gain (30dB+DPR)
0.8 lx with F1.8, Hyper gain (30dB+DPR)
Sensitivity: F11 at 2000 lx (3200K, 89.9% reflectance) (typical)
Gain selection: -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 18dB, 18dB+DPR,
24dB, 24dB+DPR, Hyper Gain (30dB+DPR)
Shutter speed selection: OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000 s
Clear scan selection: 50.3 to 201.4Hz
Signal-to-noise ratio: 61dB (typical)
Registration: 0.05% (all zones, without lens)
Geometric distortion: Below measurable level
Video output: Camera head BNC connector:
VBS: 1.0 Vp-p, sync negative
26-pin connector of CA-537/P docked to
DXC-D30WS/P
VBS: 1.0Vp-p, sync negative
Y/R-Y/B-Y: Y: 1.0Vp-p, sync negative
R-Y/B-Y: 525mVp-p
RGB: 1.4Vp-p
Y/C: Y: 1.0Vp-p, sync negative
C: 300mVp-p (burst level)
Inputs/ Outputs: INTERFACE: Pro76-pin DIGITAL,
Pro 50-pin
VIDEO OUT: BNC-type
MONITOR OUT: BNC-type
LENS: 12-pin
VF: DIN 8-pin, 20-pin
REMOTE 1: Stereo mini Dimensions
REMOTE 2: 10-pin
121 (4 7/8)

Power requirements: DC 12V (10.5 to 17V)

Power consumption: 14.9W (without VF)
15.3W (when docked with the DSR-1/P)
17W (with VF)
Operating temperature: -10˚C to 45˚C (14˚F to 113˚F)
Storage temperature: -20˚C to 60˚C (-4˚F to 140˚F) 242 (9 5/8) 164 (6 1/2)
Mass: Approx. 2.5 kg (5 lb 8 oz) for camera head only
Approx. 3.3 kg (7 lb 4 oz) with VF and microphone
258 (10 1/4)

Dimensions: 121 (W) × 206 (H) × 273 (D) mm

206 (8 1/8)

(47/8 × 81/8 × 103/4 inches)

(without projections)
Note DPR is equivalent to +6dB gain up.
18dB+DPR: Equivalent to +24dB
24dB+DRR: Equivalent to +30dB
273 (10 3/4)
Hyper Gain (30dB+DPR): Equivalent to +36dB
480 (19)

–53–
 1. Production video cameras/camcorders

DSR-130P
Digital Camcorder
•Combination of the DXC-D30P Digital Video Camera and
the DSR-1P DVCAM Dockable Recorder, equivalent to one-
piece camcorder •Compact and lightweight: 7.5 kg (16 lb 8
oz) including a viewfinder, microphone, lens, battery, tape
and carrying handle •DSP (Digital Signal Processing) •Three
2/3-inch Power HAD™ CCDs for low smear level, high
sensitivity and high S/N ratio •Superb picture quality of the
VIDEO CAMERAS

DVCAM format •Playback capability of consumer DV

recorded tapes (SP mode only) •Long recording time; up to
184 minutes with a standard cassette and 40 minutes with a
mini cassette •ClipLink™ operation •TruEye™ process for
faithful colour reproduction •DynaLatitude™ •Skin Detail with
auto detection of active area •Black halo-free, Clean Detail
•Camera Setup File system •SetupNavi™ function for
Camera Setup File storage •SetupLog™ function for
automatic recording of camera setting data •Total Level
Control System (TLCS) for automatically extended range of
light control •EZ Focus and EZ mode for quick camera setup
•Auto Tracing White Balance (ATW) function •Adjustable
Black Stretch and Compress •Dual Zebra viewfinder
indication of over exposure •Time code superimposed during
playback •Edit Search function •Freeze Mix function

Specifications
DSR-130P Camcorder
Power consumption: 24.8W (with DXF-701WSCE Viewfinder)
Mass: 7.5 kg (16 lb 8 oz) (incl. DXF-701WSCE viewfinder,
microphone, VCL-918BY lens, NP-1B battery,
videocassette, carrying handle)
Operating time: 60 min.
Dimensions (w/h/d): 121 × 206 × 344 mm
(4 7⁄8 × 8 1⁄8 × 13 5⁄8 inches)

Product Configurations
DSR-130PF1 DSR-130PK1 DSR-130PL1
DXC-D30P Camera head Yes Yes Yes
DSR-1P Recorder Yes Yes Yes
Handle for DSR-130P Yes Yes Yes
DXF-701WSCE Viewfinder Yes Yes Yes
External microphone Yes Yes Yes
Shoulder strap Yes Yes Yes
VCT-U14 Tripod adaptor Yes Yes Yes
VCL-918BY Zoom lens Yes Yes Option
LC-421 Carrying case Yes Option Option
RM-LG1 Logger Unit Yes Yes Yes

Dimensions
121 (4 7/8)

242 (9 5/8) 586 (23 1/8)

265 (10 1/2)
206 (8 1/8)

344 (13 5/8)

Unit: mm (inches)

–54–
1. Production video cameras/camcorders

PVW-D30P series
Betacam SP camcorder
•Betacam SP Camcorder with digital signal processing
camera: PVV-3P docked with DXC-D30P via the Pro 50-pin
connector •Status information and messages of the PVV-3P
(time code, recording audio level, remaining battery power,
remaining tape time, etc.) can be superimposed on the
viewfinder •Playback capability with VA-300P •Compact and
light weight 8.3 kg (18 lb 5 oz) in operation •Low power

VIDEO CAMERAS
consumption: approx. 24.1 W •Lightweight rugged
magnesium diecast body (CAMERA PART) •Large carrying
handle for enhanced transportability and easier handling in
low angle

Specifications
PVW-D30P Camcorder
Power consumption: 24.1W (with DXF-701WSCE Viewfinder)
Mass: 8.3 kg (18 lb 5 oz) (incl. DXF-701WSCE viewfinder,
microphone, VCL-918BY lens, NP-1B battery,
videocassette, carrying handle)
Operating time: 60 min.
Dimensions (w/h/d): 123 × 232 × 367 mm
(4 7⁄8 × 9 1⁄4 × 14 1⁄2 inches)

Component chart
PVW-D30PF PVW-D30PK PVW-D30PL
DXC-D30P Camera head Yes Yes Yes
PVV-3P Recorder Yes Yes Yes
Handle for PVW-D30 Yes Yes Yes
DXF-701WSCE Viewfinder Yes Yes Yes
External microphone Yes Yes Yes
Shoulder strap Yes Yes Yes
VCT-U14 Tripod adaptor Yes Yes Yes
VCL-918BY Zoom lens Yes Yes Option
LC-421 Carrying case Yes Option Option
RM-LG1 Logger Unit Yes Yes Yes

Dimensions
123 (4 7/8)

242 (9 5/8) 609 (24)

290 (11 1/2)
232 (9 1/4)

367 (14 1/2)

Unit: mm (inches)

–55–
 1. Production video cameras/camcorders

DSR-500WSP
Digital Camcorder
•Highly mobile one-piece design •Compact and lightweight:
6.3 kg (13 lb 14.2 oz) including viewfinder, microphone, lens,
battery and tape •Compact crew package with the LC-
DS300SFT or the LC-DS500 Carrying Case •Low power
consumption: Camera head consumes only 24 W. •DynaFit™
shoulder pad for comfortable molding to any shoulder
•Selectable four built-in filters: 3200 K/3000 K, 5600 K, 5600 K
VIDEO CAMERAS

+ 1/8, 5600 K + 1/64. •DSP (Digital Signal Processing) •Three

2/3-inch Power HAD WS™ CCDs for low smear level, high
sensitivity and high S/N ratio •16:9 and 4:3 Switchable
•Generates a 16:9 ID pulse automatically when shooting 16:9
images •Superb picture quality of the DVCAM format
•Playback capability of consumer DV recorded tapes (SP
mode only) •Long recording time; up to 184 minutes with a
standard cassette and 40 minutes with a mini cassette •Digital
output of i.LINK™ interface •ClipLink operation •TruEye™
process for faithful colour reproduction •DynaLatitude™ •Skin
Detail with auto detection of active area •SetupLog™ function *Optional items are included
for automatic recording of camera setting data •SetupNavi™
function for camera setup file storage •Pool feed operation in Vertical resolution: 480TV lines (w/o EVS), 530TV lines (w/EVS)
which the DSR-500WSP can function as a recorder using the Minimum illumination: 0.5 lx with F1.4, Hyper gain (30 dB+DPR)*
analogue composite signal from the distributor. (The optional 0.8 lx with F1.8, Hyper gain (30 dB+DPR)*
Sensitivity: F11 at 2000 lx (3200 K, 89.9% reflectance) (typical)
DSBK-501P is required.) •Total Level Control System (TLCS) Gain selection: -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18dB, 18 dB +
for automatically extended range of light control •EZ Focus DPR, 24 dB, 24 dB+DPR, Hyper Gain (30 dB + DPR)*
and EZ mode for quick camera setup •Auto Tracing White Shutter speed selection: OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000 sec
Clear scan selection: 50.3 to 201.4 Hz
Balance (ATW) function •Adjustable Black Stretch and Signal-to-noise ratio: 61 dB (typical)
Compress •Dual Zebra viewfinder indication of over exposure Registration: 0.05% (all zones, without lens)
•Video light connection for Anton Bauer® Ultra Light 2 •Menu Geometric distortion: Below measurable level
control by Jog Dial operation •Switch guard for preventing VTR PART
miss-operations. •Time code superimposed during playback VIDEO PERFORMANCE
•Edit Search function •Freeze Mix function •26-pin VTR Bandwidth: Luminance: 25 Hz to 5.5 MHz + 1.0/-2.0 dB
Chrominance: 25 Hz to 2.0 MHz +1.0/-2.0 dB
interface capability S/N ratio (luminance): More than 55 dB
K-factor (K2T, KPB): Less than 2.0%
Specifications Y/C delay: Less than 30 nsec
GENERAL AUDIO PERFORMANCE
Power requirements: DC 7.2 V(Battery operation), DC 8.4 V(AC adaptor) Frequency response: 48 kHz: 20 Hz to 20 kHz +0.5/-1.0 dB
Power consumption: 11.6 W (during camera recording) 32 kHz: 20 Hz to 14.5 kHz +0.5/-1.0 dB
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Dynamic range: More than 80 dB
Storage temperature: -20 °C to 60 °C (-4°F to 140 °F) Distortion (THD) Less than 0.08% (1 kHz reference level, 48 kHz)
Operating humidity: Less than 85%
Storage humidity: Less than 90% INPUT/OUTOUT connectors
Tape speed: 28.221 mm/s Signal inputs:
Recording/Playback time: Standard size: 184 min. w/PDV184ME GENLOCK VIDEO IN: BNC, 1.0 Vp-p, 75 Ω
Mini size: 40 min. w/PDVM40ME TC IN: BNC, 0.5 Vp-p to 18 Vp-p, 10 kΩ
Fast forward/Rewind time: Standard size: Approx. 12 min. w/PDV184ME EXT AUDIO CH-1/2: XLR 3-pin x 2 Female, -60 dBu, 3 kΩ-/+4 dBu,10 kΩ
Mini size: Approx. 3 min. w/PDVM40ME MIC IN: XLR 3-pin Female
Continuous recording time: Approx. 70 min. w/BP-L40 battery ANALOGUE VIDEO IN: BNC, 1.0 Vp-p, 75 Ω
140 min. w/BP-L60A battery (with DSBK-501P optional board installed)
230 min. w/BP-L90A battery Signal outputs:
Mass: Approx. 3.6 kg (7 lb 15.0 oz) camera head only VIDEO OUT: BNC, 1.0 Vp-p, sync negative, 75 Ω, 26-pin Male
Approx. 4.4 kg (9 lb 11.2 oz) with VF and VBS: 1.0 Vp-p, sync negative
microphone Y/R-Y/B-Y: Y: 1.0 Vp-p, sync negative
Approx. 5.8 kg (12 lb 12.6 oz) with VF, microphone R-Y/B-Y: 525 mVp-p
and lens Y/C: Y: 1.0 Vp-p, sync negative
Approx. 6.3 kg (13 lb 14.2 oz) with VF, microphone, C: 300 mVp-p (burst level)
lens, battery (BP-L40) and videocassette tape DV OUT: i.LINK, 6-pin IEEE1394-based
Dimensions:(w/h/d): 121 × 192 × 280 mm MONITOR OUT: BNC, 1.0 Vp-p, sync negative, 75 Ω
(4 7⁄8 × 7 5⁄8 × 11 1⁄8 inches) (without projections) TC OUT: BNC, 1.0 Vp-p, 75 Ω
242 × 247 × 547 mm AUDIO CH-1/2: Phono, -10 dBu, 47 kΩ
(9 5⁄8 × 9 3⁄4 × 21 5⁄8 inches) (with projections) S-VIDEO: DIN 4-pin, 1.0 Vp-p, 75 Ω
Others:
CAMERA PART DC IN: XLR 4-pin, Male
Image device: 3-chip 2/3-inch, Interline-Transfer CCD DC OUT: 4-pin, Female
Optics: F1.4 medium index prism system BATTERY TERMINAL: 5-pin
Effective picture elements: 980 x 582 (H x V) EARPHONE: Mini-jack
Total picture elements: 1038 x 594 (H x V) LIGHT OUT: 2-pin Female
Sensing area: 9.6 mm x 5.4 mm WRR OUT: 7-pin
Built-in filters: 1: 3200 K/3000 K LENS: 12-pin
2: 5600 K+1/8 ND VF: 20-pin
3: 5600 K REMOTE1: Stereo mini
4: 5600 K+1/64 ND REMOTE2: 10-pin
Lens mount: Sony 2/3-inch bayonet mount
Signal system: PAL colour system <Notes>
Scanning system: 2:1 interlaced, 625 lines, 50 fields/s * DPR is equivalent to +6 dB gain up.
18 dB+DPR: Equivalent to +24 dB gain up
Horizontal frequency: 15.625 kHz 24 dB+DRR: Equivalent to +30 dB gain up
Vertical frequency: 50 Hz Hyper Gain (30 dB+DPR): Equivalent to +36 dB gain up
Sync system: Internal and external with the VBS or BS signal * The specifications for “Video/Audio performance” were measured by playing back material
Horizontal resolution: 16:9 mode : 700TV lines on the DSR-85P (via analogue component out) that had been recorded on the DSR-
4:3 mode : 700TV lines 500WSP.
* 0 dBu = 0.775 Vrms

–56–
1. Production video cameras/camcorders

DSR-300P
Digital Camcorder
•Highly mobile one-piece design •Compact and lightweight:
5.7 kg (12 lb 9 oz) including viewfinder, microphone, lens,
battery and tape •Compact crew package with the
LC-300SFT Soft Carrying Case •DynaFit™ shoulder pad for
comfortable molding to any shoulder •DSP (Digital Signal
Processing) •Three 1/2-inch Power HAD™ CCDs for low
smear level, high sensitivity and high S/N ratio •Superb

VIDEO CAMERAS
picture quality of the DVCAM format •Playback capability of
consumer DV recorded tapes (SP mode only) •Long
recording time; up to 184 minutes with a standard cassette
and 40 minutes with a mini cassette •ClipLink operation
•TruEye™ process for faithful colour reproduction
•DynaLatitude™ •Skin Detail with auto detection of active
area •SetupLog™ function for automatic recording of camera
setting data •Total Level Control System (TLCS) for
*Optional items are included
automatically extended range of light control •EZ Focus and
EZ mode for quick camera setup •Auto Tracing White
Balance (ATW) function •Adjustable Black Stretch and
Compress •Dual Zebra viewfinder indication of over
exposure •Video light connection for Anton Bauer® Ultra
Light 2 •Menu control by Jog Dial operation •Time code
superimposed during playback •Edit Search function •Freeze
Mix function •26-pin VTR interface capability

Specifications Shutter speed selection: OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000 sec
Power requirements: DC 12 V (11 to 17 V) Clear scan selection: 50.3 to 201.4 Hz
Power consumption: 20 W (w/o VF), 22.1 W (w VF) Signal-to-noise ratio: 60 dB (typical)
Operating temperature: 0°C to 40°C (32°F to 104°F) Registration: 0.05% (all zones, without lens)
Storage temperature: -20°C to 60°C (-4°F to 140°F) Geometric distortion: Below measurable level
Operating humidity: Less than 85%
Storage humidity: Less than 90% VTR PART
Tape speed: 28.193 mm/s VIDEO PERFORMANCE
Recording/Playback time: Bandwidth: Luminance:25 Hz to 5.5 MHz +1.0/-2.0 dB
Standard size:184 min. PDV184ME Chrominance:25 Hz to 2.0 MHz +1.0/-2.0 dB
Mini size:40 min. PDVM40ME S/N ratio: More than 55 dB
Fast forward/Rewind time: K-factor(K2T, KPB): Less than 2.0%
Standard size:Approx. 12 min. PDV184ME Y/C delay: Less than 30 nsec
Mini size: Approx. 3 min. PDVM40ME AUDIO PERFORMANCE
Continuous recording time: Frequency response: 48 kHz: 20 Hz to 20 kHz +0.5/-1.0 dB
Approx. 80 min. BP-L40, Approx. 180 min. 32 kHz: 20 Hz to 14.5 kHz +0.5/-1.0 dB
BP-L60A, Approx. 290 min. BP-L90A Dynamic range: More than 80 dB
Mass: Approx. 3.3 kg (7 lb 4 oz) for camera head only Distortion (THD): Less than 0.08% (1 kHz reference level, 48 kHz)
Approx. 4.1 kg (9 lb 1 oz) with VF and microphone
Approx. 5.2 kg (11 lb 7 oz) with VF, microphone and INPUT/OUTOUT connectors
lens Signal inputs:
Approx. 5.7 kg (12 lb 9 oz) with VF, microphone, lens, GENLOCK VIDEO IN: BNC, 1.0 Vp-p, 75 Ω
battery (BP-L40) and videocassette tape TC IN: BNC, 0.5 Vp-p to 18 Vp-p, 10 kΩ
Dimensions (w/h/d): 121 × 192 × 270 mm (4 7⁄8 × 7 5⁄8 × 10 3⁄4 inches) EXT AUDIO CH-1/2: XLR 3-pin (2) Female, -60 dBu,
(without projections) 3 kΩ-/+4 dBu, 10 kΩ
242 × 247 × 534 mm (9 5⁄8 × 9 3⁄4 × 21 1⁄8 inches) MIC IN: XLR 3-pin Female
(with projections) Signal outputs:
VIDEO OUT: BNC, 1.0 Vp-p, sync negative, 75 Ω
CAMERA PART 26-pin connector:
Image device: 3-chip 1/2-inch, Interline Transfer CCD VBS: 1.0 Vp-p, sync negative
Optics: F1.4 medium index prism system Y/R-Y/B-Y: Y: 1.0 Vp-p, sync negative
Effective picture elements: R-Y/B-Y: 525 mVp-p
752 × 582 (H × V) Y/C: Y: 1.0 Vp-p, sync negative
Total picture elements: 795 × 596 (H × V) C: 300 mVp-p (burst level)
Sensing area: 6.4 mm × 4.8 mm MONITOR OUT: BNC, 1.0 Vp-p, sync negative, 75 Ω
(equivalent to a 1/2-inch pickup tube) TC OUT: BNC, 1.0 Vp-p, 75 Ω
Built-in filters: 1: 3200 K/3000 K (Switchable) AUDIO CH-1/2: RCA pin, -10 dBu, 47 kΩ
2: 5600 K+1/8 ND S-VIDEO: DIN 4-pin, 1 Vp-p, 75 Ω
3: 5600 K Other:
4: 5600 K+1/64 ND DC IN : XLR 4-pin, Male
Lens mount: Sony 1/2-inch Bayonet mount DC OUT: 4-pin, Female
Signal system: PAL colour system BATTERY TERMINAL: 5-pin
Scanning system: 2:1 interlaced, 625 lines,50 fields/sec. EARPHONE: Mini-jack
Horizontal frequency: 15.625 kHz LIGHT OUT: 2-pin Female
Vertical frequency: 50 Hz WRR OUT: 7-pin
Sync system: Internal and external with the VBS or BS signal LENS: 14-pin hot-shoe type or 12-pin
Horizontal resolution: 800 TV lines VF: 20-pin
Vertical resolution: 480 TV lines (w/o EVS), 530 TV lines (w/EVS) REMOTE1: Stereo mini
Minimum illumination: 0.5 lx with F1.4, Hyper gain (30 dB+ DPR) REMOTE2: 10-pin
0.8 lx with F1.8, Hyper gain (30 dB+ DPR)
Notes: *DPR is equivalent to +6 dB gain up.
Sensitivity: F 11 at 2000 lx (3200 K, 89.9% reflectance) (typical)
18 dB+ DPR: Equivalent to +24 dB
Gain selection: -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB,18 dB,18 dB+ 24 dB+ DRR: Equivalent to +30 dB
DPR, 24 dB, 24 dB+ DPR, Hyper Gain(30 dB+ DPR) Hyper Gain (30 dB+ DPR): Equivalent to +36 dB

–57–
 1. Production video cameras/camcorders

DSR-200AP
Digital Camcorder
•Compact and lightweight: 4.7 kg (10 lb 8 oz) including tape
and battery holder with three battery packs •DSP (Digital
Signal Processing) •Three 1/3-inch CCDs for accuracy of
colour reproduction •Superb picture quality of the DVCAM
format •Playback capability of consumer DV recorded tapes
(SP mode only) •Long recording time; up to 184 minutes with
a standard cassette* •Super SteadyShot™ (Optical) function
VIDEO CAMERAS

for stable picture shooting without sacrificing picture quality

•Time/date data superimposition on output pictures •Easy-to-
use viewfinder, with high horizontal resolution •Photo mode
and frame interpolation for recording clear frame picture for
seven seconds •Audio dubbing capability (32 kHz/12-bit only)
•Time code capability •i.LINK™ (DV In/Out) interface** based
on the IEEE1394 standard •LANC interface for simple editing
with a LANC-based recorder or editing system •RMT-
807/806 Remote Controller (supplied) for control of basic
functions
* The DSR-200AP accepts only standard DVCAM and DV cassettes.
** The model for European area has output only.

Supplied accessories: Wireless Remote Commander and R6 batteries (2)

RMT-807 (for European area)
RMT-806 (for PAL areas except Europe)
AV stereo cable
S cable
Lens cap
Shoulder pad
Side pad
Operation manual
Lithium battery CR2025
Optional accessories: ACC KIT-201 Accessory kit
AC-V900 AC adaptor/charger(with DK-715)
NP-F950 Rechargeable battery pack
NPA-10000 Battery adaptor
VMC-IL4415 i.LINK cable
VMC-IL4435 i.LINK cable
VMC-IL4615 i.LINK cable
VMC-IL4635 i.LIINK cable
Video signal: CCIR standard, PAL colour system
Specifications Audio signal: REC: 48 kHz/16-bit, 32 kHz/12-bit,
GENERAL PB:48 kHz/16-bit, 32 kHz/12-bit,
Power requirement: DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor) 32 kHz/16-bit, 44.1 kHz/16-bit
Power consumption: 11.6 W (during camera recording)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) INPUT/OUTPUT connectors
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) Audio input: XLR 3-pin (2) (MIC/LINE selectable) Stereo mini jack (1)
Dimensions (w x h x d): 216 × 237 × 474 mm Video outputs: Composite: BNC (1), RCA pin jack (1), 1.0Vp-p,
(8 5⁄8 × 9 3⁄8 × 18 3⁄4 inches) 75 Ω Sync negative
Mass: Approx. 3.6 kg (7 lb 15 oz) S-Video: 4-pin mini-DIN connector (1)
(without batteries and tape) Y: 1.0 Vp-p, 75 Ω unbalanced
Approx. 4.7 kg (10 lb 8 oz) C: 300 mVp-p (subcarrier burst), 75 Ω, unbalanced
(with a tape and three NP-F950 in NPA-10000/B) Audio output: RCA PIN jack (2) (L, R)
Digital input/output: i.LINK(DV IN/OUT), IEEE1394-based, 4-pin (1)
LENS PART *The model for European area has output only.
Zoom: 10:1 variable speed zoom lens(f = 5.9 to 59 mm) LANC: Stereo mini-mini jack (1)
(20 x Digital Zoom) Headphone: Stereo mini jack (1)
Filter diameter: 52 mm RFU DC output: Special mini jack (1) (DC 5 V)
Iris: Auto/Manual (F1.6 to 11) and Close External DC input: 4-pin for DK-715 cable
Viewfinder interface: 8-pin connector
CAMERA PART
Image device: 3-chip 1/3-inch, Interline-Transfer CCD
440,000 pixels, 752 × 582 (H × V)
Effective picture elements:
Total picture elements: 470,000 pixels, 795 × 596 (H × V)
Signal system: CCIR standard, PAL colour system
Scanning system: 2:1 interlaced, 625 lines, 50 fields/sec.
Gain selection: Auto/Manual (-3, 0, 3, 6, 9, 12, 15, 18 dB)
Shutter speed selection: Auto/Manual (1/3, 1/6, 1/12, 1/25, 1/50, 1/100, 1/215,
1/425, 1/1000, 1/1750, 1/3500, 1/10000 sec.)
White balance: ATW/One-push auto/5800 K/3200 K
Minimum illumination: 3 lx
Recommended illumination: More than 100 lx
Viewfinder: 1-inch black and white CRT
Built-in microphone: One-point stereo-type electret condenser
microphone directivity selectable (0°/90°/120°)
Built-in speaker: Dynamic speaker

VTR PART
Tape speed: Approx. 28.2 mm/s.(DVCAM mode)
Maximum recording time: 184 minutes (with PDV-184ME)

–58–
1. Production video cameras/camcorders

DSR-PD100AP
Digital Camcorder
•Compact and handy:1 kg (2.2 lb) with a battery and a tape
•Superb picture quality of the DVCAM format •1/4-inch
3CCDs:progressive/interlace scan switchable •Still image
recording on both tape or removable media, such as
“Memory Stick”™ •Super SteadyShot™ function with new
optical system •Extreme close-up shots with x48 digital and
x12 optical zoom •Manual Control and Full Range Auto

VIDEO CAMERAS
modes •Switchable 4:3 and 16:9 recording modes •Playback
capability of consumer DV recorded tapes(SP mode only)
•i.LINK(DV In/Out) interface based on the IEEE1394
standard •16-bit/12-bit PCM audio stereo •Audio dubbing
capability •Audio lock mode •3.5-inch LCD screen which
turns 90 degrees horizontally and 270 degrees vertically.
•Precision colour viewfinder oBuilt-in Memory card slot *Optional items are included
•InfoLITHIUM™ system: Lithium-ion battery power system
which shows the amount of power remaining in the battery,
with an accuracy of one minute
Supplied accessories: AC-L10 AC adaptor
NP-F330 Rechargeable lithium-ion battery pack
RMT-811 Remote commander and R6 batteries (2)
MSA-4A “Memory Stick” IC recording media
MSAC-PC2 “Memory Stick”/PC card adaptor
Special stereo AV cable
XLR adaptor
DV cable(Europe only)
Wide conversion lens, Lens hood
Lens cap, Lens hood, Carrying belt
Optional accessories: ECM-670 Professional microphone
CAC-12 Microphone holder
EC-0.3C2/EC-0.5C2 Microphone cable
NP-F950 InfoLITHIUM rechargeable battery pack
NP-F750 InfoLITHIUM rechargeable battery pack
NP-F730 InfoLITHIUM rechargeable battery pack
NP-F550 InfoLITHIUM rechargeable battery pack
VMC-IL4415 i.LINK Cable
VMC-IL4435 i.LINK Cable
VMC-IL4615 i.LINK Cable
VMC-IL4635 i.LINK Cable
MSA-4A/8A/16A/32A/64A “Memory Stick” IC
recording media

Specifications
GENERAL VTR PART
Power requirements: DC 7.2 V (Battery), DC 8.4 V (AC Adaptor) Tape speed: Approx. 28.2 mm/s (DVCAM mode)
Power consumption: 4.3 W using the viewfinder/5.3 W using the LCD Maximum recording time: 40 minutes (with PDVM-40ME)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Video signal: CCIR standard, PAL colour system
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) Audio signal: REC: 48 kHz/16-bit, 32 kHz/12-bit
Dimensions (w x h x d): 93 × 112 × 193.5 mm PB: 48 kHz/16-bit, 32 kHz/12-bit
(3 3⁄4 × 4 1⁄2 × 7 5⁄8 inches) 32 kHz/16-bit, 44.1 kHz/16-bit
Mass: Approx. 900 g (1 lb 15 oz)
INPUT/OUTPUT connectors
LENS PART Audio/Video input/output: Special AV mini
Zoom: 12:1 variable speed (1.88-26.5 sec) zoom lens, (converts to RCA pin jack) (1)
f = 4.3 to 51.6 mm, F1.6 to 2.8; Video input/output: S-Video IN/OUT: Mini-DIN 4 pin (1)
Filter diameter: 52 mm Mic input: Stereo mini (1)
Focus: Auto/Manual (ring)/Infinity Digital input/output: i.LINK(DV IN/OUT), IEEE1394-based, 4-pin (1)
LANC: Stereo mini-mini jack(1)
CAMERA PART Headphone: Stereo mini jack(1)
Imaging device: 3-chip 1/4-inch, Interline-Transfer CCD External DC input: 8.4V from AC-L10 AC adaptor
Effective picture elements: 400,000 pixels
Total picture elements: 450,000 pixels Memory Card Slot
Signal system: CCIR standard, PAL colour system PC Card Standard ATA specifications Type II
Scanning system: Progressive/Interlace Power requirement: 3.3/5 V
Horizontal resolution: 500 TV lines Capacity: 2 MB to 64* MB
Shutter speed: 1/4 to 1/10000 seconds (*When formatted by DSR-PD100AP)
White balance: ATW/One-push/Outdoor/Indoor Recording signals: Camera signal, VTR signal
Exposure: Auto/Manual (Exposure dial, Program AE) Image size: VGA(640x480)
Minimum illumination: 4 lx Image compression: JPEG
Viewfinder: 180,000 dot Colour LCD, Zebra pattern
*“Memory Stick” and are trademarks of Sony Corporation.
Built-in microphone: Stereo electret condenser microphone
Built-in speaker: Dynamic speaker
LCD: TFT active matrix, 3.5-inch
184,580 dots (839 x 220)

–59–
 1. Production video cameras/camcorders

DSR-PD1P
Digital Camcorder
•Compact and handy: 520 g (1.2 lb) •1/3-inch CCD •Superb
picture quality of the DVCAM format •Playback capability of
consumer DV recorded tapes (SP mode only) •40 minutes
recording time with a mini cassette* •Super SteadyShot™
function for stable picture shooting without sacrificing picture
quality •Extreme close-up shots with x20 digital and x10
optical zoom •2 1/2-inch colour LCD monitor •Colour
VIDEO CAMERAS

viewfinder •InfoLITHIUM™ system; Lithium-ion battery power

system which shows the amount of power remaining in the
battery, with an accuracy of one minute •Photo mode for high
quality still images •A/V digital fade-to-black/silence function
(Fade in from black/silence) •Audio dubbing capability (32
kHz/12-bit only) •Time code capability •i.LINK (DV In/Out)
interface based on the IEEE1394 standard •LANC interface
for simple editing with a LANC-based recorder or editing
system
*The DSR-PD1P accepts only mini DVCAM and DV cassettes.

Supplied accessories: RMT-806 Wireless Remote Control and R6 batteries

Special stereo AV cable
S cable
Vanadium-Lithium Battery (Built-in)
AA Batteries for remote control(2)
Optional accessories: ACC KIT-PD1P Accessory Kit
AC-V100/B AC adaptor/charger (with DK626)
NP-F220/B InfoLITHIUM rechargeable battrery
pack(1400 mAh)
VMC-LM7 LANC/Microphone Adaptor
VMC-IL4415 i.LINK Cable
VMC-IL4435 i.LINK Cable
VMC-IL4615 i.LINK Cable
VMC-IL4635 i.LINK Cable

Specifications
GENERAL INPUT/OUTPUT connectors
Power requirements: DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor) Audio/Video output: Special AV mini
Power consumption: 6.0W (LCD on), 5.0W (LCD off) (converts to RCA pin jack) (1)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Video input/output: S-Video IN/OUT: Mini-DIN 4 pin (1)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) Headphone: Stereo mini jack(1)
Dimensions (w x h x d): 59 x 129 x 118 mm (2 3 /8 x 5 1 /8 x 4 5 /8 inches) LANC: Available through 26-pin multi connector
Mass: 520 g (1.1 lb) (Without battery and tape) (using optional, VMC-LM7)
Mic input: Available through 26-pin multi connector
LENS PART (using optional, VMC-LM7)
Zoom: 10:1 variable speed zoom lens (1.0 to 29 seconds at
stand -by, 1.5 to 29 seconds at recording)
f = 4.0 to 40 mm; F1.8 to 2.6
Filter diameter: 37 mm
Focus: Auto/Manual/Infinity

CAMERA PART
Imaging device: 1/3-inch, Interline-Transfer CCD
Effective picture elements: 400,000 pixels
Total picture elements: 810,000 pixels
Signal system: CCIR standard, PAL colour system
Scanning system: Interlace
Shutter speed: 1/50 to 1/4,000 second (In AE mode)
White balance: Auto/Hold/Outdoor/Indoor
Exposure: Auto
Minimum illumination: 3 lux at F1.8
Viewfinder: 0.55-inch 113000 dots colour viewfinder
Built-in microphone: Stereo-type electret condenser microphone
Built-in speaker: Piezo-electric-speaker
LCD: TFT active matrix, 2.5-inch
84,485 dots (384 x 220)

VTR PART
Tape speed: Approx. 28.2 mm/s (DVCAM mode)
Maximum recording time: 40 min. (PDVM-40ME)
Maximum recording time with LCD:
95 min. (NP-F220/B, Fully charged)
Video signal: CCIR standard, PAL colour system
Audio signal: REC: 48 kHz/16-bit, 32 kHz/12-bit
PB: 48 kHz/16-bit, 32 kHz/12-bit
32 kHz/16-bit, 44.1 kHz/16-bit

–60–
1. Production video cameras/camcorders

DXC-327BP series
3-chip CCD colour video camera
•Directly dockable not only with current analog VTR’s/CA’s
but also with Digital Recorder (DSR-1P) •High sensitivity of
F9.0 at 2000 lx and a low smear level (1/10 of the
conventional camera) given by three Sony 1/2-inch IT Power
HAD (Hole Accumulated Diode) sensors •700TV lines of
horizontal luminance resolution thanks to the high density
CCD chips (470,000 total picture elements/440,000 effective

VIDEO CAMERAS
picture elements) and Sony’s original spatial offset
technology •The Power HAD sensor structure in combination
with advanced electronic circuitry allows an excellent S/N
ratio of •Electronic shutter equipped •2-line image enhancer
for crisp image •Modular design allows choice of combo *Camera adaptor is optional
stand-alone or multi-camera use •Can be combined with the
DSR-1P DVCAM Digital Recorder, allowing simple ClipLink
function •Can be docked directly with the PVV-1AP/3P for
high quality component acquisition •Can be combined with S-
VHS recorders from Panasonic or JVC via the CA-512P or
CA-513 Camera Adaptor •When cambined with CA-537P,
26-pin connector on camera adaptor provides signal output
in Y/R-Y/B-Y, VBS, Y/C and RGB forms for connection with
various equipment •The DXF-601CE: Diecast alminum body,
600TV lines of horizontal resolution, the large eye cup for
easy viewing, external TALLY and a new dioptre mechanism
for easier dioptre adjustment •Compact size, lightweight, and
low power consumption •VCL-714BX cableless 14 ç zoom
lens •Convenient built-in microphone •Safety Zone and
Centre Marker indications in viewfinder •Built-in character
generator can generate letters and numbers for titles and
dates •5 step auto iris override (+1F stop/+0.5F stop/Preset/
-0.5F stop/-1.0F stop) •Convenient gain-up function
(0/+9/+18dB) •Zebra video level indication •Two memory
white balance system •ABL (Automatic Black Level) function
•RM-M7G remote connector on camera head for remote
control in any configuration •Extended system versatility with
optional CA-325AP/325B Camera Adaptors, RM-M7G
Remote Control Unit, and CCU-M7P/M5P

Specifications
Model
General Composition DXC-327BPF DXC-327BPK DXC-327BPL DXC-327BPH
Image device: 1/2-inch Interline Transfer CCD (ç3),
Colour video camera head Yes Yes Yes Yes
795 (H) ç 596 (V) total picture elements
Tripod adaptor VCT-U14 Yes Yes Yes Option
752 (H) ç 582 (V) effective picture elements
Electronic viewfinder: 1.5-inch monochrome (except DXC-327BPH) Viewfinder DXF-601CE Yes Yes Yes Option
Lens: F1.4, 7.5 to 90mm zoom lens with auto iris/macro Zoom lens VCL-714BX Yes Yes Option Option
mechanism (DXC-327BPF/327BPK) Carrying case LC-421 Yes Option Option Option
Lens mount: Bayonet-mount
Video signal system: PAL standard
Horizontal resolution: 700TV lines
Minimum illumination: 6.0 lx with F1.4, +18dB
Sensitivity: F9.0 at 2000 lx
Sync system: Internal or external selectable Dimensions
S/N ratio: 61dB
Power requirements: DC 12V
Power consumption: 8.0W (without VF/CA-537P)
Operating temperature: ≈5 to 45°C (23 to 113°F)
127
194

Mass: 2.0 kg (4 lb 6 oz, for camera head only)

3.3 kg (7 lb 4 oz, with the CA-537P)
Inputs/Outputs
VTR/CCU/CMA: Sony Z-type, 26-pin 224
VIDEO OUT: BNC-type
GENLOCK: BNC-type
MIC IN: XLR-type, 3-pin
LENS: Hot-shoe type or 6-pin (for 2/3-inch lens)
189
242

REMOTE: 10-pin
VF: DIN 8-pin
DC IN: XLR-type, 4-pin
92

EARPHONE: mini jack

INTERCOM: mini intercom jack 255
434 Unit: mm

–61–
 1. Production video cameras/camcorders

UVW-100BP
Betacam SP One-Piece Camcorder
•High performance one-piece camcorder •Incorporates three
1/2-inch IT Power HAD sensors •High quality Betacam SP
component recording format •High sensitivity of F11.0 at
2000 lx, high signal to noise ratio of 58dB, high horizontal
resolution of 700TV lines •Compact and light weight approx.
7.3 kg including the viewfinder, battery, cassette and lens
•Low power consumption of 20W •More than 35 minutes of
VIDEO CAMERAS

recording time using the S-size metal Betacam SP cassette

•Programmable gain up (0 to 18dB) •ATW (Auto Tracing
White Balance) •Total Level Control System provides
optimum adjustments for any lighting conditions: AGC
(Automatic Gain Control), AE (Auto Exposure) and
Intelligent Auto Iris •Built-in safety zone and centre marker
generator in the viewfinder •Two memories for white balance
value •×14 zoom lens: VCL-714BX (supplied with the UVW-
100BPF/BPK) •1/2-inch bayonet mount •Variable electronic
shutter •Clear Scan function (50.0 to 201.5Hz) •Camera
gen-lock and Time Code gen-lock capability •The 26-pin
interface provides component, composite and Y/C video Horizontal resolution: 700TV lines
Minimum illumination: 4.0 lx with F1.4 +18dB
signal to an external VTR for simultaneous recording •Built- Sensitivity: F11.0 at 2000 lx
in time code generator and reader •Real Time/Date Gain selection: 0dB
recording function •Two longitudinal audio channels with the MID (1dB to 17dB in 1dB steps)
HIGH (2dB to 18dB in 1dB steps)
Dolby C-Type NR (Noise Reduction) system •Recording (MID < HIGH)
review and back space editing function •Colour playback in 0dB to 18dB variable (AGC)
the field with the optional VA-300P Playback Adaptor Shutter speed selection: OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000s
Clear Scan range: 50.0Hz to 201.5 Hz
•8-digit LCD display •Bargraph meter for audio level and S/N ratio: 58dB
battery status •Built-in earspeaker •External microphone Registration: 0.05% (all zone, without lens)
Geometric distortion: Below measurable level
power supply (+48V, Ch-1/2) Camera: VBS: 1.0Vp-p, sync negative
26-pin connector: VBS: 1.0Vp-p, sync negative
Optional accessories: Battery pack NP-1B, BP-90A Y: 1.0Vp-p, 75Ω, sync negative
Battery charger BC-1WDCE, BC-410CE R-Y/B-Y: 0.525Vp-p
Battery adaptor DC-520, DC-500 Y/C: {Y}; 1.0Vp-p, 75Ω, sync negative
AC adaptor AC-550CE {C}; 0.3Vp-p (burst level)
AC power adaptor CMA-8ACE
Playback adaptor VA-300P VTR Portion
Remote controller RM-81 Video
Carrying case LC-421 Recording system: Rotary 4-head helical scan system
Rain cover LCR-1 R-Y/B-Y: FM recording (CTDM)
26/26-pin cable CCZ-A cable Y: FM recording
14/26-pin cable CCZQ-A cable Time Code IN (BNC): 0.5V to 5Vp-p, 10kΩ
Tripod adaptor VCT-U14 Time Code OUT (BNC): 1.0Vp-p, 75Ω
Supplied accessories: Tripod adaptor
Audio
External Michrophone
Input: MIC: –60dBu, 3kΩ, balanced
Shoulder strap
Line: +4dBu, 10kΩ, balanced
Viewfinder
×14 zoom lens Video Performance
Carring case Bandwidth: Y: 25Hz to 5.0MHz +1.0
–4.0 dB
Operational manual R-Y/B-Y: 25Hz to 1.5MHz +1.0–4.0 dB
S/N ratio: Y (Component IN/OUT):
Specifications More than 46dB
R-Y/B-Y: More than 47dB
General Distortion: K-factor: Less than 3%
Type: One-piece camcorder Y/C delay: Less than 30ns
Power requirements: DC 12V +5.0
–1.0 V
Audio Performance
Power consumption: 20W (at 12V, without viewfinder)
Frequency response (20dB below peak level):
Operating temperature: 0 to 40˚C (32 to 104˚F) 50Hz to 12.5kHz +2.0
–3.0 dB
Storage temperature: –20 to 60˚C (–4 to 140˚F) S/N ratio (at peak level* CCIR 468-3):
Humidity: Less than 85% (relative humidity) More than 60dB
Mass: 7.3 kg (fully equipped with Distortion (at 1kHz, operational level (+4dBu)):
VF/lens/battery/MIC) Less than 1.5%
Tape speed: 101.5 mm/s Wow and flutter: Less than 0.18%rms
Playback/recording time: More than 35min with UVWT-30MA
Fast forward time: Less than 7.5min with UVWT-30MA Connectors
Rewind time: Less than 5.5min with UVWT-30MA Playback adapter: 20-pin
External VTR Connector: 26-pin
Camera Head Camera Video OUT: BNC (2)
Image device: Three 1/2-inch IT Power HAD CCD sensors Camera GEN LOCK IN: BNC
Optics: F1.4 medium index prism system Camera MIC IN: XLR (3-pin) with 48V OUT
Picture element: Total: 795 × 596 (H × V) Audio IN: XLR (2) (3-pin) with 48V OUT selectable
Effective: 752 × 582 (H × V) Headphone OUT: Stereo mini jack
Built-in filters: 1: 3200K Remote: Stereo mini jack
2: 5600K + 1/16ND Lens: 12-pin (for 2/3-inch lens)
3: 5600K DC IN: XLR 4-pin (for the optional CMA-8ACE)
Lens mount: 1/2-inch bayonet Time Code IN: BNC
Video signal aystem: PAL (colour) Time Code OUT: BNC

–62–
1. Production video cameras/camcorders
Component Chart
UVW-100BPF UVW-100BPK UVW-100BPL
Camcorder UVW-100BP Yes Yes Yes
External microphone Yes Yes Yes
Shoulder strap Yes Yes Yes
Tripod adapter VCT-U14 Yes Yes Yes
Viewfinder DXF-601CE Yes Yes Yes
Zoom lens VCL-714BX Yes Yes Option
Carring case LC-421 Yes Option Option

VIDEO CAMERAS

Dimensions

128 (51/8) 370 (145/8)

269 (105/8)
210 (83/8)

342 (131/2)

Unit: mm (inch)

* Peak level = +8dB above operational level.

–63–
 2. Production camera accessories

CCU-TX7P
Camera Control Unit
•Triax camera control unit for the DXC-D30P/D30WSP •Runs
either on AC or DC (12 V) power •High speed high quality
data transmission •High quality triax transmission •Long
distance transmission, up to 1125mm via (phi)13.2mm cable
(Belden) and up to 750m via Ø8.5mm cable (Fujikura,
Belden) •Two SDI outputs •Two component video outputs
(selectable from Y/R-Y/B-Y, R/G/B and Y/C) in addition to
VIDEO CAMERAS

two composite output •Two inputs for return video •Colour

teleprompter compatible •Flexible intercom system •Program
microphone system •RS-232C port •Coaxial control
capability •Half a 19-inch rack size wide and 4 units high
Supplied accessories: AC power cord (1)
Plug holder for AC power cord (1)
Number plate (1 set)
Operation manual (1)

Specifications
Input connectors: GEN LOCK: BNC type, loopthrough,
VBS/BS, 1.0Vp-p, 75 Ω
RETURN (1,2): BNC type, loopthrough,
VBS, 1.0 Vp-p, 75 Ω
PROMPT (prompter): BNC type, loopthrough,
VBS, 1.0 Vp-p, 75 Ω
PGM IN: XLR 3-pin (1)
Output connectors: VBS (1,2): BNC type, VBS, 1.0 Vp-p, 75 Ω
(*)Y/R-Y/B-Y (1,2): BNC type,
Y: 1.0Vp-p, 75 Ω
R-Y/B-Y: 525mVp-p, 75 Ω
(*)R/G/B (1,2): BNC type, 700mVp-p, 75 Ω
(*)Y/C (1,2): BNC type, Y: 1.0Vp-p, 75 Ω
C: 300mVp-p, 75 Ω
SDI (1,2): conform to serial digital interface
(270 Mbps), 0.8 Vp-p, 75 Ω
SYNC: BNC type, VBS, 0.3 Vp-p, 75 Ω, negative
PIX (picture monitor): BNC type, 1.0 Vp-p, 75 Ω
WF (waveform monitor): BNC type, 700 mVp-p,
75 Ω (Encoded output:
1.0 Vp-p, 75 Ω)
WF MODE: 4-pin (1)
MIC OUT (CH-1/2): XLR 3-pin (2), 0dBu/–20dBu
balanced, 2 channels
Camera control: CAMERA: Triax (Fischer type) (1)
input/output: COAX: BNC type (1)
connectors: REMOTE: 10-pin
INTERCOM/TALLY: D-sub 25-pin (1) 4W/2W
TALLY: 24V DC, TTL level or
contact selectable Dimensions
163 (6 1/2)
INTERCOM (Front): XLR 5-pin (1)
RTS: XLR 3-pin (1)
RS232C: D-sub 25-pin (2)
45

Power requirements: AC 220 to 240V or DC 10.5 to 17.0V

Power consumption: 95W max.
Cable length: 1500 m max. (±14.5 mm)
Operating temperature: 5°C to 40°C (41°F to 104°F)
Storage temperature: –20°C to 55°C (–4°F to 131°F)
Mass: Approx. 8.45 kg (18 lb 10 oz)
Dimensions: 218 (W) × 169 (H) × 415 (D) mm
370 (14 5/8)
280 (11 1/8)

(85/8 × 63/4 × 163/8 inches)

370 (14 5/8)
230 (9 1/8)
70
55

15
164 (6 1/2)
26 122 (4 7/8)

8 30 140 (5 5/8)
5

(*) These CCU output signals can be selected to be R/G/B or Y/R-Y/B-Y or Y/C.
(Note: This product is not available in some countries.) 200 (7 7/8) 9.5 (3/8) Unit: mm (inch)

–64–
2. Production camera accessories

CCU-M7P
Camera control unit for DXC-D30P/D30WSP/327BP
series
•Remote Control of DXC-D30P/D30WSP/637P/327BP series
colour video camera with maximum cable length of 300m
•Scene File memory for up to four shooting conditions •VBS,
R/G/B, Y/R-Y/B-Y, Y/C outputs •XLR connector for MIC
output •Built-in AC power supply •19-inch rack mountable
and 2-units high

VIDEO CAMERAS
Specifications
Power requirements: AC 185 to 275V, 50/60Hz
Power consumption: 62W
Inputs/outputs: VBS OUT (2);
BNC-type, 1.0Vp-p, sync negative, 75Ω
R/G/B OUT;
BNC-type, 700mVp-p, 75Ω
Y/R-Y/B-Y OUT;
BNC-type,
Y: 1.0Vp-p, sync negative, 75Ω
R-Y/B-Y: 525mVp-p (75% colour bars)
Y/C OUT;
Y/C connector (4-pin),
Y] 1.0Vp-p, sync negative, 75Ω
C] 300mVp-p, 75Ω
SYNC OUT;
BNC-type, 4.0Vp-p, 75Ω, negative
GENLOCK IN;
BNC-type, VBS (1.0Vp-p) or
BS (300mVp-p), loop through
RET VIDEO IN;
BNC-type, VBS, 1.0Vp-p, loop-through
CAMERA;
Sony Z-type, 26-pin
TALLY/INTERCOM;
DIN 4-pin or screw terminals
MIC OUT;
XLR-type, 3-pin, ≈20dBu
Control: Gain select
Output mode select
Status display ON/OFF
Shutter speed select
Iris (auto/manual)
White balance (auto/manual/preset)
R/B gain
Black balance (auto/manual/preset)
Master pedestal
R/B pedestal
Gamma (manual/preset)
Master gamma
R/B gamma
Knee point (auto/manual/preset)
Detail level
Sub-carrier phase
Horizontal phase
Scene File operation
Tally/Intercom
Operating temperature: ≈10 to 45°C (14 to 113°F)
Dimensions: Approx. 424 (W) ç 103 (H) ç 387 (D) mm
(163/4 ç 41/8 ç 151/4 inches)
Mass: 8.5 kg (18 lb 12 oz)
Supplied accessories: AC power cord
Rack mount metals
Optional cables:
(CCU-M7P ↔ DXC-D30P/D30WSP/327BP series)
CCZ-A2 (2m)
CCZ-A5 (5m)
CCZ-A10 (10m)
CCZ-A25 (25m)
CCZ-A50 (50m)
CCZ-A100 (100m)

–65–
 2. Production camera accessories

CCU-M5P
Camera control unit for DXC-D30P/D30WSP/
327BP/950P/9100P
•Directly interfaces with both Z-type (26-pin) and Q-type
(14-pin) camera systems •Also interfaces with DXC-950P/
9100P via CCTZ/CCZ-A or CCTQ/CCQ-AM combination
•Remote control operation with maximum cable lengths of
300m for Z-type and 100m for Q-type cable VBS, R/G/B,
Y/R-Y/B-Y, Y/C output •Built-in AC power unit •19-inch rack
VIDEO CAMERAS

mountable and 2-units high

Specifications

Power requirements: AC 187V to 275V, 50/60Hz

Power consumption: 54W
Inputs/outputs: VBS OUT (2);
BNC-type, 1.0Vp-p, sync negative, 75Ω
R/G/B OUT;
BNC-type, 700mVp-p, 75Ω
Y/R-Y/B-Y OUT;
BNC-type
Y: 1.0Vp-p, sync negative, 75Ω
R-Y/B-Y: 525mVp-p (75% colour bars)
Y/C OUT;
Y/C connector (4-pin),
[Y] 1.0Vp-p, sync negative, 75Ω
[C] 300mVp-p, 75Ω
SYNC OUT;
BNC-type, 4.0Vp-p, 75Ω, negative
GENLOCK IN;
BNC-type, VBS(1.0Vp-p) or
BB(450mVp-p), loop-through
RET VIDEO IN;
BNC-type, VBS, 1.0Vp-p, loop-through
CAMERA;
Sony Q-type, 14-pin
Sony Z-type, 26-pin
TALLY/INTERCOM;
DIN 4-pin or screw terminals
Control: Gain select
Output mode select
Status display
Shutter speed select
Iris (auto/manual)
White balance (auto/manual/preset)
Black balance (auto/manual/preset)*1
R/B gain
Master pedestal
R/B pedestal*2
Gamma (DXC-950P/9100P only)
Knee point (auto/manual/preset)*1,2
Detail level
Sub-carrier phase
Horizontal phase
Tally/Intercom*1,2
Operating temperature: 5 to 40°C (41 to 104°F)
Dimensions: Approx. 424 (W) ç 103 (H) ç 321 (D) mm
(163/4 ç 41/8 ç 123/4 inches)
Mass: 5.9 kg (13 lb)
Supplied accessories: AC power cord
Rack mount brackets
Optional cables:
(CCU-M5P ↔ DXC-D30P/D30WSP/327BP)
CCZ-A2 (2m)
CCZ-A5 (5m)
CCZ-A10 (10m)
CCZ-A25 (25m)
CCZ-A50 (50m)
CCZ-A100 (100m)
(CCU-M5P ↔ DXC-950P/9100P)
CCTZ-3RGB (3m) & CCZ-A Cable
CCTZ-3YC (3m) & CCZ-A Cable
CCTQ-3RGB (3m) & CCQ-AM Cable

Note: *1 When used with the DXC-950P, these items can not be controlled.
*2 When used with the DXC-9100P, these items can not be controlled.

–66–
2. Production camera accessories
ACC KIT-201
Accessory Kit
•Accessory kit of the DSR-200AP
•Consisting of three NP-F950, one
NPA-10000/B and one AC-V900/B

VIDEO CAMERAS
ACC KIT-PD1
Accessory Kit
•Accessory kit of the DSR-PD1P
•Consisting of one NP-F220/B, one
AC-V100/B and one VMC-LM7

RM-M7G Inputs/outputs:
CAMERA: 10-pin
Remote control unit for DXC-D30P/ MONITOR OUT: BNC-type
D30WSP/327BP/DSR-300P/500WSP AUXILIARY IN: 10-pin
•Compact and lightweight hand-held Control: Gain select
control unit Output mode select
VTR start/stop
•For field production or video operational Iris (auto/manual)
panel for CCU-M7P/M5P Auto iris override
White and black balance
Power requirements: (auto/manual/preset)
DC 9 to 17V, from a camera or a CCU White balance memory
Power consumption: R/B gain
0.4W Gamma (manual/preset)
Mass: 500 g (1 lb 2 oz) Master pedestal (manual/preset)
Dimensions: Approx. R/B pedestal
86 (W) ç 170 (H) ç 47 (D) mm Knee point (auto/manual/preset)
(31/2 ç 63/4 ç 17/8 inches) Shutter speed select
Detail
Lock (ON/Part/OFF)

RM-VJ1P General
Signal input: Composite
Remote Control Unit for the Power consumption:
DSR-300P/500WSP 3 W (at operation), 1.3 W (LCD off)
•Includes a 2.5-inch colour hand-held Dimensions: 261(H) × 77.4(W) × 32.5(D) mm
monitor (w/o projections)
•High quality microphone (10 3⁄8 × 3 1⁄8 × 1 5⁄16 inches)
•REC Start/Stop, REC Review, TAKE and Mass: 240 g (8 oz)
Operation temperature:
NG marking for ClipLink operation
0 °C to 40 °C (32 °F to 104 °F)
•Zoom control, Focus control* Cable length: 7 m (20 ft) (CCA-7-7A only)
*Requires lens with remote focus capability.
Monitor
Supplied Accessory: Display: 2.5-inch TFT LCD, 180K dot
CCA-7-7A Camera Cable
Strap for Remote Control Unit Microphone
Instruction Manual Connector: 4-pin (equivalent to ECM-77BC)
Directivity: Omni-directional

–67–
 2. Production camera accessories
RM-81
Remote control unit
•To START/STOP the recording mode of
the UVW-100B Betacam SP one-piece
camcorder

Connector: Stereo mini

Cable length: 5 m
VIDEO CAMERAS

RCP-TX7 Dimensions: 100 (W) × 330 (H) × 70 (D) mm

(4 × 13 × 27/8 inches)
Remote Control Panel Cable length: 50m max. (with CCA-7 cable)
•Remote Control Panel of the CCU-TX7P Supplied accessories:
•Covers the complete range of control CCA-7-5 Connecting Cable (5m)
functions •Can be installed into a standard Number plate (1set)
19-inch rack with RMM-TXR7 Rack Screws and washers (2)
Mount Kit Operation manual (1)

Power requirements:
10 to 17V
(supplied from camera or CCU)
Power consumption:
4.0W
Operating temperature:
–10°C to 45°C (14°F to 113°F)
Storage temperature:
–20°C to 55°C (–4°F to 131°F)
Mass: Approx. 1.5 kg (3 lb 5 oz)
(Note: This product is not available in some countries.)

CA-325AP Power requirements:

AC 220/240V, 50/60Hz
Camera adaptor for DXC-D30P/ Power consumption:
D30WSP/327BP 44W
•Multiple outputs of R/G/B, composite sync, Inputs/outputs:
VBS, Y/C and AUDIO signals INTERFACE; 50-pin
VBS OUT; BNC-type
•Built-in AC power unit
R/G/B OUT; BNC-type (3)
COMPOSITE SYNC OUT;
BNC-type
Y/C OUT;
Y/C connector (Mini DIN 4-pin)
AUDIO OUT; Phono jack
GENLOCK IN; BNC-type
REMOTE; 10-pin
Mass: 1.3 kg (2 lb 14 oz)

CA-327P Power requirements:

DC 12V
Camera adaptor for DXC-D30P/ Inputs/outputs:
D30WSP/327BP INTERFACE; DIN 50-pin
•For interfacing DXC-D30P/D30WSP/ VTR/CCU/CMA; Sony Q-type, 14-pin
327BP with portable VTRs, CCU-M5P and MIC IN; XLR-type, 3-pin
CMA-8ACE DC IN; XLR-type, 4-pin
•Equips an S-connector and audio out GENLOCK IN; BNC-type
EARPHONE; mini jack
connector
INTERCOM; mini intercom jack
•The units with serial NO. 40100 and below Mass: 1.2 kg (21 lb 10 oz)
can be used only with DXC-327BP

–68–
2. Production camera accessories
CA-537P Power requirements:
DC 12V
Camera adaptor for DXC-D30P/ Power consumption:
D30WSP/327BP 1.7W
•For interfacing DXC-D30P/D30WSP/ Inputs/outputs:
327BP with portable VTRs, INTERFACE; DIN 50-pin
CCU-M7P/M5P and CMA-8ACE VTR/CCU/CMA; Sony Z-type, 26-pin
•Supplies mic power from MIC IN connector MIC IN; XLR-type, 3-pin
DC IN; XLR-type, 4-pin
GENLOCK IN; BNC-type
EARPHONE; mini jack
INTERCOM; mini intercom jack

VIDEO CAMERAS
Mass: 1.3 kg (2 lb 14 oz)

CA-511
Camera adaptor for DXC-D30P/
D30WSP/327BP
•Allows BVV-5PS and DNV-5 to be coupled
with a DXC-D30P/D30WSP/327P

Power requirements:
DC 12V
Power consumption:
0.1W
Inputs/outputs:
INTERFACE; DIN 50-pin
Betacam output; D-sub 50-pin
Mass: 0.5 kg (1 lb 2 oz)

Note: The CA-511 does not allow connection with the

CA-50P/50AP series camera adaptors.

CA-512P
Camera adaptor for DXC-D30P/
D30WSP/327BP
•Allows an AG-7450 Panasonic S-VHS
video tape recorder to be coupled with a
DXC-D30P/D30WSP/327BP

Power requirements:
DC 12V
Power consumption:
0.35W
Input/outputs:INTERFACE; 50-pin (1)
68-pin (1)
Mass: 0.7 kg (1 lb 9 oz)

CA-513
Camera adaptor for DXC-D30P/
D30WSP/327BP
•Allows a BR-S422E JVC S-VHS video tape
recorder to be coupled with a
DXC-D30P/D30WSP/327BP

Power requirements:
DC 12V
Power consumption:
0.15W
Input/outputs:INTERFACE: 50-pin (2)
Mass: 0.69 kg (1 lb 8 oz)

–69–
 2. Production camera accessories
CA-TX7P
Camera Adaptor
•Camera Adaptor for the DXC-D30P/ D30WSP to
the CCU-TX7 Triax Camera Control Unit. •Rotary
(70˚) triax connector for easy cabling •Allows box
cursor indication on the viewfinder attached to the
DXC-D30P/D30WSP, such as
DXF-701CE/701WSCE/51/41. (This function is
not available with the DXC-637P)

Supplied accessory:
VIDEO CAMERAS

Operation manual (1)

Input/output connectors:
CCU: Triax (Fischer type) (1)
CAMERA: Pro 76P Digital or
Pro 50P switchable
MIC IN (CH-1/2): XLR 3-pin (2), 600ohms,
balanced
Input level: Mic in: –60dB Power consumption
Line in: –20dB DC 120V DC 12V
DC IN: XLR 4-pin (1),10.5V to 17V
DC OUT: 4-pin (1), 10.5V to 17V, CA-TX7P Total CA-TX7P Total
Max 12W CA-TX7P only 10.5W 10.5W 7.5W 7.5W
PROMPTER OUT: BNC type (1), w/DXC-D30P,
1.0Vp-p, 75ohms 11.2W 26W 7.5W 22.3W
DXF-701WSCE
RETURN OUT: BNC type (1),
1.0Vp-p, 75ohms w/DXC-D30P,
12.3W 35W 7.5W 30.2W
INTERCOM/PROGRAMME: DXF-51
XLR 5-pin (1) (for Headset)
Input level: -60dBs (dynamic)
Operating temperature:
Output level: -0dBu, max 12dBu
-10 °C to 45 °C (14 °F to 113 °F)
DATA OUT: 10-pin (1)
Storage temperature:
DC 0 to 5V (analogue) (4)
-20 °C to 55 °C (-4 °F to 131 °F)
DC 0 or 5V (digital) (2)
Operating humidity:
Power requirements
20% to 90%
DC 120V (from Triax connector) or
Mass: Approx. 2.7 kg (5 lb 15oz)
DC 12V (10.5 to 17.0V) (from DC IN
Dimensions: 226 (H) × 221 (W) × 131 (D) mm
connector)
(9 × 83/4 × 51/4 inches)

(Note: This product is not available in some countries.)

CA-WR855
Camera Adaptor for the WRR-855A
Attaches directly to the DSR-300P/500WSP
via a V-shoe attachment and a direct
audio/power connection interface.

Input voltage:
DC 10 to 17 V (12 V normal)
Output voltage:
DC 7 V
Load current: 200 mA DC or less (at DC 7V)
Mass: Approx. 300 g (10 oz)
Dimensions :
90 (W) × 132 (H) × 36 (D) mm
(3 5⁄8 × 5 1⁄4 × 1 7⁄16 inches)
(w/o projections)

COU-TX7
Camera Operational Unit
•Operational Panel of the CCU-TX7P •Can
be attached to form a part of the front panel
of the CCU-TX7P •Supports basic control of
camera operation and painting •Useful when
using the CCU-TX7P in limited space

Supplied accessory:
Operation manual (1)
Mass: Approx. 330 g (12.6 oz)
Dimensions: 105 (H) × 155 (W) × 43 (D) mm
(41/4 × 61/8 × 13/4 inches)

(Note: This product is not available in some countries.)

–70–
2. Production camera accessories
DSBK-301A
Index Picture Board
Allows Index Picture recording (ClipLink) to
the DSR-300P/500WSP

Power requirement:
DC 3.4 V (supplied from VTR)
Power consumption:
Less than 300 mW
Mass: 47 g (1.6 oz)
Dimensions: 111 mm × 113 mm
(4 3⁄8 × 4 1⁄2 inches)

VIDEO CAMERAS
DSBK-501P
Analogue Composite Input Board
for the DSR-500WSP
Mass: approx. 22 g ( 0.7 oz)
Dimensions: 54 mm × 47 mm
(2 1⁄4 × 1 7⁄8 inches)

DXBK-701
SDI Output Board for the CCU-TX7P
Power consumption:
4.5 W
Dimensions (w/h/d):
17 × 148 × 227 mm
(11⁄16 × 5 7⁄8 × 11 inches)
Mass: 330 g (11.6 oz)

DXF-601CE Picture tube: 1.5-inchmonochrome

Horizontal resolution:
High resolution 1.5-inch electronic 600 lines (centre)
viewfinder for DXC-327BP, Indicator: REC/TALLY indicator, BATT
UVW-100BP (monochrome) indicator, SHUTTER indicator,
•Supplied with DXC-327BPF/327BPK/ GAIN UP indicator
327BPL UVW-100BPF/100BPK/100BPL Power requirements:
DC 12V
•Rugged, diecast aluminium body
Power consumption:
•Large eye cup size 2.1W
•Peak volume control Mass: 660 g (1 lb 7 oz)
•High horizontal resolution of 600TV lines Dimensions: Approx.
•Quick start CRT 192 (W) ç 63 (H) ç 219 (D) mm
(75/8 ç 21/2 ç 85/8 inches)

–71–
 2. Production camera accessories
DXF-701WSCE Picture tube: 1.5-inchmonochrome
Horizontal resolution:
High resolution 1.5-inch electronic 600 lines (centre)
viewfinder for DXC-D30P/D30WSP Indicator:
DSR-300P/500WSP (monochrome) REC (2), TAKE, BATT,
•Supports 16:9 and 4:3 aspect ratio SHUTTER, GAIN UP
•Rugged, diecast aluminium body Power requirements:
DC 12V
•Large eye cup size
Power consumption:
•Two Red REC Tally Lamps 2.1W
•Peak volume control Mass: 660 g (1 lb 7 oz)
•High horizontal resolution of 600TV lines Dimensions: Approx.
VIDEO CAMERAS

•Quick start CRT 236 (W) ç 85 (H) ç 219 (D) mm

(93/8 ç 31/4 ç 85/8 inches)

DXF-41 Power consumption:

10W
4-inch electronic viewfinder for Operating temperature:
DXC-D30P/D30WSP/637P/327BP, 0 to 40°C (32 to 104°F)
UVW-100BP, EVW-300P Dimensions: Approx.
105 (W) ç 107 (H) ç 252 (D) mm
(monochrome)
(41/4 ç 41/4 ç 10 inches)
•CCIR/EIA switchable including projecting parts and
•Tally, intercom facilities controls
•Can be mounted into the RMM-1800 rack Mass: Approx. 1.62 kg (3 lb 9 oz)
mounting metal with stand and hood

Picture tube: 4-inch monochrome, Supplied accessories:

50° deflection Stand (1), Screws (4), Hood (1)
Horizontal resolution: Connecting cord (mini-mini) (1)
500 lines (centre)
Connectors: DIN 8-pin connector
Phone and mini for intercom
Power requirements:
Supplied from a camera

DXF-51 Supplied accessories:

Hood, 20-pin Cable,
5-inch Monochrome Viewfinder DIN 8-pin Cable,
•High horizontal resolution of 650 TV lines Operation Manual
•Stable video image •Bright and clear color Specifications
image •Under Scanning capability •Can Picture tube: 5-inch monochrome, 70° deflection
operate either on EIA and CCIR signals Scanning system:
systems with automatic selection •16:9/4:3 2:1 interlace, 625/50 or 525/59.94 switchable
Automatic Aspect Ratio Selection •The Horizontal resolution:
viewfinder aspect ratio of the DXF-51 is 650TV lines (center)
Camera connector:
automatically switched between 16:9 and
20-pin or DIN 8-pin connector
4:3 •Two red REC tally lamps •Green Tally Power requirements:
Lamp which can be used as a second tally DC 12V +5.0/-1.5V (supplied from a camera)
lamp for CCU operations •20-pin connector Power consumption:
for DXC-D30P/D30WSP •DIN 8-pin 11W
connector for DXC-327BP/637P etc. •+/- 40 Operating temperature:
degrees of tilting is possible •+/- 90 degrees 0°C to 40°C (32°F to 104°F) including projecting parts and controls
of panning is possible •Rugged and Mass: Approx.2.4 kg (5 lb 5 oz) with stand and hood Approx. 202 (H) × 199 (W) × 289 (D) mm
Dimensions: Approx. 202 (H) × 199 (W) × 217 (D) mm (8 × 77/8 × 111/2 inches)
compact body
(8 × 77/8 × 85/8 inches) with stand and hood

DR-100
Intercommunication headset
•Used in the DXC-D30P/D30WSP/637P/
327BP, UVW-100BP, CCU-M5P/M7P,
SEG-2550AP/2000AP
•With mini type 4-pole plug

Mass: 105 g (3.7 oz)

–72–
2. Production camera accessories
LC-421
Carrying case for DXC-D30P/
D30WSP, DXC-327BP, UVW-100BP
•Can hold the DXC-D30P/D30WSP/
637P/327BP in camcorder configuration
with DSR-1P/PVV-1AP/PVV-3P/EVV-9000P
•Supplied with the PVW-637PK/637PL,
PVW-D30F, DSR-130PF, UVW-100BPF

Dimensions: Approx.
790 (W) ç 440 (H) ç 340 (D) mm

VIDEO CAMERAS
(311/8 ç 173/8 ç 131/2 inches)
Mass: 7.7 kg (17 lb)

LC-DS300SFT
Soft Carrying Case for the
DSR-300P/500WSP
•Direct pack with accessories attached:
Battery pack, Microphone, Viewfinder and
Zoom lens.
•Easy to pack a variety of accessories such
as Battery charger and other items.

Mass: approx. 3.5 kg (7 lb 11 oz)

Dimensions (w/h/d):
220 × 300 × 620 mm
(without projection)
(8 3⁄4 × 11 7⁄8 × 24 1⁄2 inches)

LC-DS500
Hard carrying case for the
DSR-300P/500WSP
•Direct pack with accessories attached:
Battery pack, Microphone, Wireless receiver
Viewfinder and Zoom lens.
•Easy to pack a variety of accessories such
as RM-VJ1P, Battery charger and other
items

Mass: approx. 8 kg (17 lb 10 oz)

Dimensions (w/h/d):
424 × 777 × 396 mm
(16 3⁄4 × 30 5⁄8 × 15 5⁄8 inches)

LCR-1
Camera rain cover for DXC-D30P/
D30WSP/327BP, UVW-100BP
camcorders
•Can be used for the DXC-D30P/D30WSP/
327BP, in camcorder configuration with
DSR-1P/BVV-5PS/PVV-3P
•Transparent material used to operate camera
and VTR switches with the LCR-1 on

Mass: 260g (9 oz)

–73–
 2. Production camera accessories
LCH-VX9000
Hard Carrying Case
•Hard Carrying Case for DSR-200AP
•Possible to house accessories for DSR-
200AP

Specifications:
Dimensions: 560(W) × 395(H) × 310(D) mm
(22 1⁄8 × 15 5⁄8 × 12 1⁄4 inches)
Mass: Approx. 6.5kg (14 lb 5.2 oz)
VIDEO CAMERAS

LCH-TRV900
Hard Carrying Case
•Hard Carrying Case for DSR-PD100AP
•Possible to house accessories for the DSR-
PD100AP.

Specifications:
Dimensions: 352(W) × 236(H) × 162(D) mm
(13 7⁄8 × 9 3⁄8 × 6 3⁄8 inches)
Mass: Approx. 2.5kg (5 lb 8.1 oz)

CAC-12
Camera microphone holder
•Adjustable microphone direction
•For attaching the ECM-672/670 or the
C-74 condensor microphone to the
DXC-D30P/D30WSP/327BP, DSR-300P/
500WSP and UVW-100BP

EC-0.3C2
Microphone cable
•Cable length: 0.3 m
•Connectors: XLR-3-11C ↔ XLR-3-12C

–74–
2. Production camera accessories
EC-0.5C2
Microphone cable
•Cable length: 0.5 m
•Connectors: XLR-3-11C ↔ XLR-3-12C

VIDEO CAMERAS
ECM-670
Electret Condenser Microphone
•Super-cardioid microphone with minimum
sensitivity to ambient noise •Compact and
light weight design •Suitable for mounting
on Sony Betacam, DVCAM and DXC series
cameras •External power supply (DC 12V to
48V)

ECM-672
Electret Condenser Microphone
•Super-cardioid characteristics, rejecting
indirect sound •2-way powering — internal
battery (Approx. 3,000 hours of continuous
operation) or external power supply (DC
48V) •2-position low-cut filter •Suitable for
mounting on Sony Betacam, DVCAM and
DXC series cameras

CAC-4
Chest pad for DXC-D30P/D30WSP/
327BP, UVW-100BP
•Provides more stable camera operation
•Attachable to the VCT-12/U14 tripod
adaptors directly

Mass: Approx. 185 g (7 oz)

–75–
 2. Production camera accessories
VCT-U14
Tripod adaptor for DXC-D30P/
D30WSP/637P/327BP, UVW-100BP,
DSR-300P/500WSP
•Adjustable camera position with screws

Dimensions: 282 (W) ç 27 (H) ç 80 (D) mm

(111/8 ç 11/8 ç 31/4 inches)
Mass: Approx. 900 g (2 lb)
VIDEO CAMERAS

WRR-855A
UHF Synthesized Tuner
•Slot-in type portable tuner designed for use
with Sony camcorders •Water proof
structure •Compact design and lightweight
only 280g (11 oz)

RMM-1800
Rack-mounting metal
•This mounting adaptor is used for installing
the DXF-41 and CMA-8ACE into a 19-inch
EIA standard rack which provides a clean
and organized
arrangement for studio system

Dimensions: 482 (W) ç 136.2 (H) ç 223 (D) mm

(19 ç 53/8 ç 87/8 inches)
Mass: 3.1 kg (6 lb 13 oz)
Supplied accessories:
Blank panel (2)

RMM-TXC7
Rack Mount Kit
•Allows two CCU-TX7P units or one unit
with a waveform monitor to be be mounted
into a standard 19-inch rack

Mass: Approx. 3.7 kg (8 lb 3 oz)

Dimensions: 482 (W) × 177 (H) × 380 (D) mm
(191/8 × 7 × 15 inches)
Supplied accessories:
Installation manual (1)
Blank panel (1)

(Note: This product is not available in some countries.)

–76–
2. Production camera accessories
RMM-TXR7
Rack Mount Kit
•Up to four RCP-TX7P units can be installed
into a standard 19-inch rack •Comes with
two blank panels

Mass: Approx. 2.7 kg (5 lb 12 oz)

Dimensions: 482 (W) × 75 (H) × 354 (D) mm
(19 × 3 × 14 inches)
Supplied accessories
Installation manual (1)

VIDEO CAMERAS
Blank panel (2)

(Note: This product is not available in some countries.)

LO-32BMT
2/3-inch lens mount adaptor for
DXC-327BP/9100P/950P/930P and
UVW-100BP
•For mounting a 2/3-inch bayonet-mount
type lens on the DXC-327BP/9100P/
950P/930P and UVW-100BP

LO-23
Flexible cable unit
•Servo zooming and manual focusing for
Fujinon Lens, such as
VCL-916 BYA and VCL-714BXA

Cable length: 1 m (3.3 ft)

Mass: 1.2 kg (2 lb 10 oz)

LO-26
Flexible cable unit
•Servo zooming and manual focusing for
Canon Lenses, such as VCL-918BY

Cable length: 1 m (3.3 ft)

Mass: 1.1 kg (2 lb 7 oz)

–77–
 2. Production camera accessories
LENSES FOR DXC-D30P/D30WSP, PVW-D30P and DSR-130P/500WSP camcorder
(2/3-inch Bayonet mount type, 12-pin connector)
VIDEO CAMERAS

VCL-918BY
Image format 2/3-inch

Mount Sony bayonet

Focal length 9 to 162 mm
Zoom ratio 18ç
Zoom control Manual & motorized
Iris control Auto & manual
Maximum aperture ratio 1.8
Minimum object distance 0.9 m
Zoom extender —
Macro Yes
Filter size 82 mmø
Mass 1.3 kg (2.7 lb)
Dimensions 171.5 mm(L) (67/8 inches)
Note By Canon

LENSES FOR DSR-300P (1/2-inch Bayonet mount type, Hot-shoe connector)

VCL-714BXA
Image format 1/2-inch

Mount Sony 1/2-inch bayonet

Focal length: 7.5 mm to 105 mm
Zoom ratio: 14×
Zoom control: Manual/Motorized
Iris control: Manual/Auto
Maximum aperture ratio: 1.4
Minimum object distance: 1.1 m
Zoom extender NO
Macro Yes
Filter size: 72 mm
Mass: 1.1 kg (2 lb 6 oz)
Dimensions: 157.5 mm(L) (6 1⁄4 inches)
Lens connectors Hot-shoe type
Notes by Fujinon

–78–
3. Sensor video cameras

DXC-H10
2/3 inch 3-CCD Colour Video Camera
(not available in Europe)
•Three 2/3 inch IT (Interline Transfer) Hyper HAD® CCDs
•New HDVS (High Definition Video System) camera with
2,000,000 effective picture elements and 1000TV lines of
resolution •High sensitivity of F8.0 at 2,000 lux •Compact and
light weight: 1200 g •CCD IRIS® , AGC (Automatic Gain
Control) , and Auto Iris function control wide range of

VIDEO CAMERAS
incoming light levels •Four pattern Light Metering System
with selectable detection method (Multi, Average, Spot, and
Peak Mode) •Three white balance modes (AWB, ATW,
Manual) •Ten step electronic shutter speed selection
•On-screen programmable menu functions •Full function
control from the rear panel or the optional RM-C950 Remote
Control Unit •Precise picture controls including Linear Matrix,
Vertical Shading Compensation, Advanced Detail, Knee,
Master Pedestal, and Negative/Positive mode •Flash
synchronization function •Various electronic shutter functions
including Clear Scan™, Long Term Exposure, RR (Restart
Reset), and LTR (Long Term Reset)
Supplied Accessories: Lens mount cap (1) Vertical Shading compensation:
Name sheet for the buttons on the RM-C950 (1) OFF/MANUAL switchable
Operating Instructions (1) Gamma compensation: ON/OFF switchable
Optional Accessories: Camera Adaptor CMA-H10 Negative/Positive mode: ON/OFF switchable
Remote Control Unit RM-C950 Accumulation mode: Field/frame switchable
Digital Scan Converter DSC-1024G Detail compensation: ON/OFF switchable
Camera Cable CCZ-A2/A5/A10/A25/A50/A100 Flash synchronization: ON/OFF switchable
Microscope adaptors and couplers MVA-690, Video signal output mode: GBR/YPB/PR switchable
MVAC-33-0/N/SM Sync signal format: Tri-level sync signal/Bi-level switchable
Monitor cable CCXC-9DBS, D-SUB 9-pin ↔ 5 BNC Sync signal input/output mode:
Input/output switchable (HD/VD and SYNC signals
Specifications switched simultaneously)
Image system/optical system Horizontal phase: Adjustable
Image device: Three 2/3-inch Interline Transfer Hyper HAD CCDs Inputs/outputs
Picture elements: 1920 (horizontal) × 1035 (vertical) Video input/output signals:
Shooting system: CCD 3-chip Y/R/G/B output: 1 Vp-p (75 Ω)
Lens: Prism type, F1.4 PB/PR output: 0.7 Vp-p (75 Ω)
Lens mount: 2/3 inch bayonet type HD/VD input/output: 1 Vp-p (75 Ω)
Video system SYNC input/output: 0.6 Vp-p (tri-level, 75 Ω), 0.3 Vp-
Synchronization: Internal/external synchronization, automatic p (bi-level)
switching WEN pulse: TTL level, negative
Signal format: HD format (conforms to BTA standard) External sync input: SYNC or HD/VD switched automatically
Output frequency (horizontal/vertical): External trigger input: TTL level, negative
33.75 kHz/60 Hz or 33.71 kHz/59.94 Hz Pulse width: more than 3H
(60 Hz or 59.94 Hz switchable) Input/output connectors: MONITOR: D-sub 9-pin
Functions/performance CAMERA ADAPTOR: 26-pin
Horizontal resolution: 1000TV lines LENS IRIS: 12-pin
Min. illumination: 16 lx (F1.4, G or Y: 100%, gain: + 12 dB) LENS CTRL: 12-pin
Sensitivity: 2000 lux (F8, 3,200K) system FLASH: small coaxial type
Signal-to-noise ratio: 50 dB (Y, Gain: 0 dB, Gamma: OFF, 100 kHz to General
30 MHz) Power supply: 15 V DC (10.5 to 15 V)
Gain control: Fixed: 0/6/12 dB selectable Power consumption: Approx. 25 W
AGC: Automatically adjusted within range of 0 dB to Operating temp: -5 to 45°C (23 to 113°F)
12 dB Storage temp: -20 to 60°C (-4 to 140°F)
White balance: AWB: automatic adjustment (2,500 K to 9,000 K) Operating humidity: 20% to 80% (free of condensation)
(R. PAINT and B. PAINT adjustable) Storage humidity: 20% to 95% (free of condensation)
ATW: Automatic tracing (R. PAINT and B. PAINT Mass: 1.2 kg (2 lb 10 oz)
adjustable)
MANU: Manual adjustment (R. GAIN and B. GAIN
adjustable)
Colour temperature: 3200 K/5600 K switchable
Electronic Shutter: CCD IRIS: Automatic exposure control (within range
of 1/60-1/10,000 seconds)
STEP: 1/100 (flickerless mode), 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/40000,
1/100000 s
MANU: 2 to 256 frames (low speed mode frame),
1 to 560H (high speed mode)
External Trigger Shutter: RR (Restart Reset) Dimensions
EXT. TRIG
LTR (Long-term reset) 120(43/4) 21(27/32) 21(27/32) 120(43/4)
AE mode: MULTI, AVERAGE, SPOT, PEAK
35(1 7/16)
35(1 7/16)

Knee: HI, LOW, AUTO

95(3 3/4)

Master Pedestal: Adjusts pedestal levels of G, B, and R channels

simultaneously
Linear Matrix: ON/OFF switchable 47.5(17/8)
95(3 3/4)
42.5(111/16) 11(7/16) 160(63/8) 16.4(21/32)
Unit: mm (inch)

–79–
 3. Sensor video cameras

DXC-LS1P
CCD Colour Video Camera
•Extremely small and compact camera composed of a
camera head and a camera control unit •1/4-inch Hyper HAD
CCD adoption •High picture quality with 460TV lines, a high
sensitivity of F5.6 at 2000 lx and an excellent signal-to-noise
ratio •Advanced colour matrix function allows you to adjust R,
G and B colours independently for accurate colour
reproduction •Easy call-up function of favorite settings (2
VIDEO CAMERAS

patterns) •Exchangeable camera head •AE control function

(CCD IRIS function combined AGC) provides automatic
control over incoming light •Automatic backlight adjustment
•Built-in electronic zoom function (x1.00 to x3.00) •Four-
pattern Light Metering System with selectable detection
method •Alternative White Balance Control modes - AWB,
ATW, 5600 K or 3200 K (Trimming with R/B paint function is
possible with AWB, 5600 K and 3200 K) •Shutter speed
control capability for long term exposure •With variable
gamma function, the contrast of the picture can be changed
for a clear view •Enhancer function provides crisper, sharper
images •Three different sizes of colour bars •Flicker
canceller is provided, freeing the electronic shutter •Positive
films can be shot as negative, or vice versa •B&W mode for
sharp images free from colour noise •Built-in RS-232C
interface •Genlock capability with VBS •Y/C or VBS output
•Optional CMA-D2CE or AC-E90HG can be used for power
supply
Supplied Accessories: Tripod adaptor (1)
Lens mount cap (1)
Operation manual (1)

Specifications
Image device: 1/4-inch Interline Transfer Hyper HAD CCD Colour matrix: ON/OFF switchalbe
Picture elements: 752(H) × 582(V) R : –60 to 0 to +60
Sensing area: 3.2 × 2.4 mm (1/4-inch) G : –60 to 0 to +60
Scanning system: 625 lines, 2 : 1 interlace B : –60 to 0 to +60
Sync system: Internal or external with VBS Gamma: –16 to 0 to +15
Phase control: H (0 to +255) / SC (0/180, 0 to +255) Colour mode: ON/OFF switchable
Horizontal resolution: 460TV lines Colour bars: FULL/HI/LOW/OFF switchable
Lens mount: Ultra mount Negative/Positive reverse: ON/OFF switchable
Sensitivity: 2000 lx with F5.6 Menu memory: 2 pages
Minimum illumination: 10 lx (F1.2) Flicker canceller: AUTO/OFF switchable
Gain control: AGC / 0 to -12dB (1dB steps) switchable Baud rate: 19200, 9600, 4800
Electronic shutter: OFF/MANUAL/AUTO Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative
MANUAL: 1/50, 1/100, 1/125, 1/250, 1/1000, 1/2000, Y/C: Y : 1.0 Vp-p, 75 Ω, sync negative
1/4000, 1/8000, 1/10000, 1/20000, 1/40000 C : 0.3 Vp-p, at burst level, 75 Ω
(seconds) Operating temperature: 0˚C to 40˚C (32˚F to 104˚F)
2 to 512 fields, ODD/EVEN switchable Storage temperature: –20˚C to 60˚C (-4˚F to 140˚F)
Signal-to-noise ratio: 44 dB Power requirements: DC 12 V (Supplied from CMA-D2CE)
White balance: ATW/AWB/5600K/3200K selectable DC 9 V (Supplied from AC-E90HG)
(R/B paint: –128 to 0 to +128) Power consumption: 5W
AE mode: ON/OFF switchable Maximum cable length: 10 m using 10m optional cable (CCMC-16P10)
AE level: –60 to 0 to +60 Mass: Camera head (without lens and supplied cable) :
Light metering system: Backlight compensation/Full/Centre (Large)/Centre 8 g (0.3 oz)
(Small)/Slit (Large)/Slit (Small) Camera control unit : Approx. 665 g (1 lb 7 oz)
Detection method: Peak/average switchable Connectors: Camera head : CAMERA (16-pin)
Master pedestal: –10 to 0 to +40 Camera control unit : CAMERA (20-pin), VIDEO
H Enhancer: –16 to 0 to +15 OUT (BNC), DC IN/VBS (12-pin, DC jack), Y/C (DIN
Zoom: ON (×1.00 to ×3.00)/OFF switchable 4-pin), GENLOCK (BNC), RS-232C (8-pin), WE OUT
(PIN)
Dimensions

40.1(1 5/8)
ø11.4(15/32)

ø11.8(15/32)

6.7(9/32)(IN AIR)
M10.5 x 0.5
ø12(1/2)

(7/16 x 1/32)
110(4 3/8) 160(6 3/6)

1(1/16) 10(13/32) S
AUTO
ø8.9(3/8)

WHITE
13.8(9/16) 12(1/2) 40(1 5/8)
ø6(1/4)

MENU
50(2)

POWER DISP

CAMERA CAMERA CONTROL UNIT

2(3/32)
25(1)

11.8(15/32)

Unit: mm (inch)
20(13/16)

–80–
3. Sensor video cameras

DXC-390P
3-CCD Color Video Camera
•1/3 type IT 3-CCD •C mount •Exwave HAD technology
provides excellent sensitivity and low smear levels •Superior
picture quality: High resolution of 800 TVL and S/N ratio of
61 dB •High Sensitivity of F8 at 2000lx •Scene Files and
User Files •Powerful picture contrast controls: DynaLatitude,
Dynamic Contrast Control Plus (DCC+) and Black Stretch
•Several enhance controls: Detail, Linear Matrix and

VIDEO CAMERAS
Potential Enhance •Wide selection of Automatic Exposure
(AE) modes •Hyper Gain •RGB, Y/C and composite video
outputs •Full control of functions from the side panel or the
optional RM-C950 Remote Control Unit
Supplied accessories: Lens cap (1)
Tripod adapter (1)
Operation manual (1)
Panel sheet for RM-C950

Optional accessories: Lens VCL-610WEA/614WEA

VCL-08WM/16WM/25WM
Remote control unit RM-C950
Camera adapter CMA-D2/CE, CMA-D3/CE
Digital still recorder DKR-700/P
Microscope adapter MVA-15
Microscope coupler MVAC-33-N/33-O/33-SM
Camera cable CCDC-5/10/25/50A/100A White balance: AWB/ATW NORMAL/ATW
CCMC-12P02/05/10/25 WIDE/MANUAL/3200K/5600K selectable
CCXC-9DBS AWB or ATW R/B Paint, MANUAL R/B Gain
CCMC-9DS/9DSMN ATW area: NORMAL/MANU selectable
CCMC-3MZ ATW speed: FAST/NORMAL/SLOW selectable
CCZ-A2/A5/A10/A25/A50/A100 Detail level: ON/OFF (Variable at ON)
Detail Frequency: HIGH/MID/LOW selectable
Specifications Linear matrix: ON/OFF
Pick-up device: 1/3 type IT (Interline Transfer) CCD Linear matrix MODE: STANDARD/R Enhance/G Enhance/B
Effective picture elements: Enhance/Manual selectable
752 (H) × 582 (V) Partial Enhance: ALL/IN/OUT selectable
Sensing area: 6.00 (H) × 4.96 (V) mm CCD integration mode: FIELD/FRAME selectable
Scanning system: 2:1 interlaced, 625 lines Shading Compensation: OFF/ON (Manual control)
Horizontal frequency: 15.625 kHz Trigger Polarity: Positive edge trigger /Negative edge trigger
Vertical frequency: 50 Hz selectable
Sync system: Internal or External with VBS, HD/VD(Automatic Baud rate: 19200/9600/4800/2400/1200 selectable
Switching) Sync: RGB/G/OFF selectable
Phase control: H/SC phase control Strobe: ON/OFF
Horizontal resolution: 800TV lines User File: A/B switchable (Two pattern memories)
Lens mount: C mount Scene File: STANDARD/MICROSCOPE/FULL
Flange back: 17.526 mm in air AUTO/STROBE/FILE A or B
Sensitivity: F8.0 at 2000 lux Output signal: VBS: 1.0 Vp-p, 75 Ω, sync negative
Minimum illumination 4 lux (F2, GAIN:HYPER) RGB: 0.7 Vp-p, 75 Ω, Sync ON/OFF possible
S/N ratio: 61 dB SYNC: 2 Vp-p, 75 Ω
Gain: STEP/AGC/HYPER selectable Y: 1.0 Vp-p, 75 Ω
STEP: 0~24 dB by 1 dB step C: 0.3 Vp-p, 75 Ω, without sync
AGC:0~24 dB (Limit value: 6 dB, 12 dB, 18 dB, 24 dB Operating temperature: -5˚C to 45˚C
variable) Storage temperature: -20˚C to 60˚C
HYPER: 30 dB Power requirements: DC 10.5V to 15.0V
Electronic shutter: OFF/STEP/VARIABLE/CCD IRIS selectable Power consumption: Approx. 7.6W
OFF 1/50s Dimensions: 56 (W) × 50 (H) × 128 (D) mm
STEP: OFF (PAL:1/50 s), F.L.(PAL:1/120 s), 1/125, 1/250, (Excluding projecting parts)
1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, Weight: Approx. 370g
1/40000, 1/100000, 0.1, 0.2, 0.3, 0.5, 1.0, 1.5, 2.0, Connectors: Lens (6 pin)
2.5, 3.0, 3.5, 4.0, 5.0, 6.0, 7.0, 8.0s RGB/SYNC (9 pin D-sub)
VARIABLE: DC IN/VBS (12 pin)
in high-speed mode 310/625 to 1/625H, OFF VIDEO OUT (BNC)
in low-speed mode 255 to 1 frames for field mode TRIGGER IN (BNC)
256 to 2 frames for frame mode REMOTE (8 pin mini DIN)
CCD IRIS: 1/60~1/100,000 s (Limit value: 1/500,
1/1000, 1/2000, 1/4000, 1/10000,
1/20,000, 1/40,000, 1/100,000 s variable) 16.5 40
Lens: Remote (Auto or Manual)/Video selectable
AE area: Multi/Large/Medium/Spot/Slit/Manual selectable
AE level: Variable
25

AE speed: Fast/Mid/Slow selectable

AE detect: Average/Peak selectable
Contrast Effect: Manual/DynaLatitude/DCC+ selectable
Knee Point: High/Normal/Low selectable(Contrast Effect: Manual)
50 (140.7)
Black stretch: Variable (Contrast Effect: Manual)
128 12.7
Gamma: ON/OFF Variable
Pedestal: Master and R/B Manual adjustable
Black balance: ABB
56

–81–
 3. Sensor video cameras

DXC-9100P
3-CCD Colour Video Camera
•Progressive scan 3-CCD camera featuring full-frame
dynamic image capturing •Square picture pixels adoption
(8.3 µm x 8.3 µm) for more accurate measurements •Three
alternative signal output capability - Normal mode and Frame
shutter mode (2:1 interlace) and Non-interlaced mode • High
picture quality with 800TV lines, a high sensitivity of F5.6 at
2000lx and an excellent S/N raito of 57 dB •By utilizing the
VIDEO CAMERAS

built-in frame memory, freeze function (continuous freeze

mode or source/freeze mode is selectable) and long term
exposure function can be controlled without external
equipment •Three-pattern Light Metering System with
selectable detection method •Remote control from the
optional RM-C950 Remote Control Unit or CCU-M5P Camera
Control Unit is possible •Built-in RS-232C interface •On-
screen four divided menu with User Preset function for easy
set-up •Digital control CCD IRIS function (equivalent to four F-
stops) and AGC automatically adjusts a wider range of
incoming light levels •Alternative White Balance Control
modes - AWB, ATW (Trimming with R/B paint function is
possible) or manual (R/B gain level adjustment) •Variable
speed electronic shutter such as External Trigger Shutter,
Clear Scan function in addition to the conventional eight-step
selection •RGB output via a 9-pin D-sub connector •Y/C or
VBS output can be selected from the 9-pin D-sub connector
•Composite signal output via a BNC connector •Genlock
capability with VBS or BS signals •Accepts bayonet-mount
lenses with a hot-shoe connection •Optional CMA-D2CE can
be used for power supply
Supplied Accessories: Lens mount cap (1)
Operation manual (1)
Buttons label for the optional RM-C950 Remote
Control Unit

Specifications
Image device: 1/2-inch Interline Transfer Hyper HAD CCD (x3) Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative
Picture elements: 782(H) × 582(V) RGB : 0.7 Vp-p, 75 Ω
Sensing area: 6.4 × 4.8 mm Y/C : Y : 1.0 Vp-p, 75 Ω, sync negative
Scanning system: PAL standard format : 625 lines, 2:1 interlace C: 0.3 Vp-p, at burst level, 75 Ω
Non-interlaced format : 1/50, Non-interlaced VGA : RGB : 0.7 Vp-p
Horizontal frequency: PAL standard format : 15.625 kHz SYNC/HD/VD : 2.0 Vp-p, 75 Ω
Non-interlaced format : 31.25 kHz WEN : 5.0 Vp-p, high impedance
Vertical frequency: PAL standard format : 50 Hz External sync input: VBS/BS/VS/SYNC/HD/VD
Non-interlaced format : 50 Hz (VBS : 1.0 Vp-p or burst 0.3 Vp-p, SYNC : 0.3 Vp-p,
Sync system: Internal or external with VBS, BS, VS, SYNC or HD/VD : 2.0 to 4.0 Vp-p), 75 Ω
HD/VD External trigger input: Trigger pulse, low level : 0 to 0.5 V,
Phase control: H (-99 to 0 to +99) / SC (0/180, -99 to 0 to +99) high level : 4.5 to 5.0 V, high impedance
Green-on-sync: ON/OFF switchable Operating temperature: –5˚C to 45˚C (23˚F to 113˚F)
Horizontal resolution: 800 TV lines Storage temperature: –20˚C to 60˚C (-4˚F to 140˚F)
Vertical resolution: 575 TV lines Power requirements: DV 12 V (Supplied from CMA-D2CE or CCU-M5P)
Lens mount: 38 mm bayonet mount Power consumption: Approx. 12 W
Sensitivity: 2000 lx with F5.6 (3200 K) Mass: Approx. 790 g (1 lb 11 oz)
Minimum illumination: 15 lx (F1.4, +18 dB) Connectors: LENS (6-pin), RGB/SYNC (D-sub 9-pin),
Signal-to-noise ratio: 57 dB DC IN/VBS (12-pin), VIDEO OUT (BNC), CCU (20-
Gain control: AGC / 0 to 18 dB (1 dB steps) switchable pin), REMOTE (8-pin), EXT CTRL (BNC), HOT
Electronic shutter: OFF/STEP/VARIABLE/CCD IRIS selectable SHOE (14-pin)
STEP : 1/50, 1/120, 1/125, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000 (seconds)
0.1, 0.2, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0,
6.0, 7.0, 8.0 (seconds)
Dimensions
VARIABLE : 255 to 1 frame, 312/625 to 1/625H
AE Window: Large/Medium/Spot (Peak/average switchable) 53(2 1/8)
Colour temperature: 3200 K/5600 K 14(9/16)
ø65(2 5/8)

White balance: ATW, AWB (R/B Paint : -10 to 0 to +10)

MANU (R/B Gain : -127 to 0 to +127) 79(3 1/8) 168.2(6 3/4)
External trigger shutter: ON/OFF switchable 10.5 145(5 3/4)
(7/16) 12.7
(1/2)
79(3 1/8)

Freeze control: INT. CTRL/EXT.CTRL switchable S

15°
Master pedestal: –99 to 0 to +99
Detail: ON/OFF switchable (-99 to 0 to +99) 90°
Gamma: ON/OFF switchable 34
(1 3/8)
User preset: A/B switchable 14(9/16)
User protect: ON/OFF switchable 48(1 15/16)

Baud rate: 9600, 4800, 2400, 1200 Unit: mm (inch)

Trigger pulse: Negative pulse/Positive pulse switchable

–82–
3. Sensor video cameras

DXC-950P
3-chip CCD colour video camera
•Multi-purpose 3-CCD compact camera for versatile industrial
video applications •Newly developed 1/2-inch IT Power HAD
sensor CCDs •High horizontal resolution of 750TV lines
•Extremely high sensitivity of F8.5 at 2000 lx •Excellent
signal-to-noise ratio of 58 dB •Excellent colour reproduction
•Convenient operational functions including Flash
Synchronization and Three-pattern Light Metering System

VIDEO CAMERAS
•Various precise picture controls •Field or frame integration Lens is optional
mode selectable •Remote control from the optional RM-C950
Remote Control Unit or CCU-M5P Camera Control Unit •Built-
in RS-232C serial interface •On-screen four divided menu
with Memory Bank function for easy set-up •Digital control
CCD IRIS function (equivalent to six F-stops) and AGC
automatically adjusts a wide range of incoming light level
•Alternative White Balance Control Modes - AWB, ATW
(Trimming with R/B Paint function is possible) or manual (R/B
gain level adjustment) •Minutely controlled electronic shutter
speed - Manual speed selection (1H for Clear Scan or 1
frame step for long term exposure) in addition to the
conventional 8-step speed selection
Supplied accessories: Lens mount cap Detail: ≈99 to 0 to +99
Operation manual Phase control: H/SC phase control
Optional accessories: Camera adaptor CMA-D2CE H. phase: ≈99 to 0 to +99
Remote control unit RM-C950 SC phase: 0/180
Camera control unit CCU-M5P Fine: ≈99 to 0 to +99
Digital Still Recorder DKR-700P Gamma: ON/OFF switchable
DC cable CCDC-5/10/25/50A/100A Knee: 1/2 switchable
12-pin multi-core cable CCMC-12P02/05/10/25 Green-on-sync: ON/OFF switchable
Component/RGB cable CCXC-9DD Memory bank: A/B switchable
Component/RGB cable CCMC-9DS/9DBS Memory protect: ON/OFF switchable
Component/RGB cable CCMC-9DSMN Data send: A>B, B>A switchable
Camera cable CCTQ-3RGB Baud rate: 9600, 4800, 2400, 1200
Camera cable CCTZ-3RGB Flash mode: OFF/master/slave switchable
Camera cable CCTZ-3YC Printer trigger: ON/OFF switchable
Microscope adaptor with auto iris MVA-40 Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative
Microscope adaptor MVA-41A RGB: 0.7 Vp-p, 75 Ω
Microscope adaptor (one way) MVA-265 Y/C: Y: 1.0 Vp-p, 75 Ω, sync negative
Coupler for NIKON microscopes except the C: 0.3 Vp-p, 75 Ω, without sync
SMZ-10 series MVAC-33-N Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω
Coupler for NIKON SMZ-10 series microscopes R-Y: 0.525 Vp-p, 75 Ω
MVAC-33-SM B-Y: 0.525 Vp-p, 75 Ω
Coupler for OLYMPUS microscopes MVAC-33-O Operating temperature: ≈5 to 45°C (23 to 113°F)
Coupler for ZEISS microscopes except AXIOVERT Storage temperature: ≈20 to 60°C (≈4 to 140°F)
100/135 series and SV series ZBB Power requirements: DC 12 V
Coupler for ZEISS AXIOVERT 100/135 series and (supplied from CMA-D2CE or CCU-M5P)
SV series microscopes ZSV Power consumption: 7.8 W
2/3-inch Lens Mount Adaptor LO-32BMT Mass: Approx. 670 g (1 lb 8 oz)
Manual zoom lens VCL-707BXM Connectors: LENS (6-pin), RGB/SYNC (D-sub 9-pin),
Remote zoom lens VCL-712BXEA GENLOCK IN (BNC), DC IN/REMOTE (12-pin),
Remote zoom lens VCL-714BXEA VIDEO OUT (BNC), CCU (20-pin), FLASH
Remote zoom lens VCL-717BXEA (Synchronous socket), REMOTE (8-pin)
Specifications
Image device: 1/2-inch Interline Transfer Power HAD CCD (ç3)
Picture elements: 752(H) ç 582(V) Dimensions 146.7 (57⁄8)
Sensing area: 6.4 mm ç 4.8 mm 123.5 (47⁄8) 12.7
Video signal system: PAL standard (1⁄2)
Scanning system: 625 lines, 2:1 interlace Ô Power HAD
72 (27⁄8)

Sync system: Internal or external with VBS or BS

Horizontal resolution: 750TV lines
Lens mount: 38 Bayonet mount 3CCD COLOR VIDEO CARAME

Sensitivity: 2000 lx with F8.5

Minimum illumination: 6.5 lx (F1.4)
Gain control: AGC/0 to 18 dB (1dB step)/ISO (400, 800, 1600)
switchable
70 (27⁄8)

(25⁄8)

Electronic shutter: OFF (1/50s)/STEP/Long Exp./C. Scan switchable

¶65

STEP: 1/120(FL), 1/125, 1/250, 1/500, 1/1000,

1/2000, 1/4000, 1/10000 (seconds)
Long Exp.: 255 to 1 frames (for field mode), 14
256 to 2 frames (for frame mode), OFF 50 (2) (9⁄16) 1/4-20UNC
C. Scan: 310/625 to 1/625(H), OFF
CCD IRIS control: ON/OFF switchable
White balance: ATW, AWB (R/B Paint: -7 to 0 to +7)
MANU (R/B Gain: ≈99 to 0 to +99)
Signal-to-noise ratio: 58 dB
Linear matrix: ON/OFF switchable
Shading compensation: OFF/1 to 9 14 (9⁄16)
45
Master pedestal: ≈99 to 0 to +99 (113⁄16) Unit: mm (inch)

–83–
 3. Sensor video cameras

DXC-107AP
CCD colour video camera
•High resolution 1/2-inch IT Hyper HAD sensor CCD offers
high quality picture •High sensitivity in minimum illumination
of only 4.5 lx with F1.2 lens •Signal-to-noise ratio of 46 dB
•High horizontal resolution of 460TV lines •S-video output is
available through the CMA-D2CE Camera Adaptor •Four
alternative white balance control: Automatic control modes—
AWB (Auto White Balance)/ATW (Auto Tracing White),
VIDEO CAMERAS

Preset modes—INDOOR (3200 K)/OUTDOOR (5600 K)

•3-position selectable CCD-IRIS covers various light
conditions—BACKLIGHT/STANDARD/SPOTLIGHT
•Variable speed electronic shutter •Built-in four digit ID
number generator •C-mount adoption •External genlock
capability of VS •Together with the YS-W150P/YS-W250P Lens is optional
Camera Adaptor, video and sync signals, and DC power can
be transmitted up to 300 metres away through a single
5C-2V coaxial cable •Remarkably compact and lightweight
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual
Optional accessories: Camera adaptor YS-W150P
Camera adaptor CMA-D2CE
Camera adaptor YS-W250P
DC cable CCDC-5/10/25/50A/100A
12-pin multi-core cable CCMC-12P02/05/10/25
Microscope adaptor MVA-12
Coupler for NIKON microscopes except the
SMZ-10 series MVAC-33-N
Coupler for NIKON SMZ-10 series microscopes
MVAC-33-SM
Coupler for OLYMPUS microscopes
MVAC-33-O
Coupler for ZEISS microscopes except AXIOVERT
100/135 series and SV series ZBB
Coupler for ZEISS AXIOVERT 100/135 series and
SV series microscopes ZSV

Specifications 1
⁄4-inch-20 UNC
Image device: 1/2-inch InterlineTransfer Hyper HAD CCD
Picture elements: 752 ç 582 (V) Dimensions
Sensing area: 6.4 mm ç 4.8 mm
Video signal system: PAL standard
Sync system: Internal or external with VS
Horizontal resolution: 460TV lines
Lens mount: C mount
Sensitivity: F5.6 at 2,000 lx (AGC off)
Minimum illumination: 4.5 lx with F1.2 (AGC on) 27.5 (11⁄8)
Gain control: AGC ON/OFF switchable
Electronic shutter: OFF, 1/120, 1/250, 1/1000, 1/2000, 1/4000, 55 (21⁄4) 130 (51⁄8)
1/10000 (seconds)
S/N ratio: 46 dB
CCD IRIS control: BACKLIGHT/STANDARD/SPOTLIGHT switchable
52 (21⁄8)

Phase control: H phase control

50 (2)

Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative

Y/C: Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω, without sync
Operating temperature: 0 to 40°C (32 to 104°F) 25
(1) 5 (7⁄32) 1
⁄4-inch-20 UNC
Power requirements: DC 12 V from CMA-D2CE/D7CE 31
DC 28 V from CMA-D7CE/YS-W250P (11⁄4)
Power consumption: 3.3 W using CCMC-12P multi-core cable or CCDC Unit: mm (inch)
DC cable (DC 12 V)
6.3 W using coaxial cable (DC 28 V)
Maximum cable length: 300 m using 5C-2V coaxial cable and
CMA-D7CE/YS-W250P
100 m using
CCDC-100A DC cable and CMA-D2CE
25 m using CCMC-12P25 multi-core cable and
CMA-D2CE/D7CE
White balance: AUTO: ATW or AWB
PRESET: 3200 K or 5600 K
Mass: Approx. 360 g (12.7 oz) without lens
Connectors: DC IN/VIDEO OUT (BNC)
DC IN (12-pin)
LENS (4-pin)

–84–
4. Sensor camera accessories
CMA-D3CE Connectors CAMERA (26-pin MULTI)
VIDEO OUT (BNC)
Camera Adaptor for DXC-390P SYNC IN / OUT (BNC)
•Supplies DC power and transmits TRIG INPUT (BNC)
video/sync signal between the adaptor and W. E OUTPUT (BNC)
the DXC-390P with CCZ-A cable and REMOTE (mini DIN 8 pin)
CCMC-3MZ cable Power requirements:
•Connects with optional RM-C950 remote AC 100-240 V or
control unit DC (10.5 to 15.0 V)
•AC IN/DC IN Dimensions: 210 (W) × 44 (H) × 210 (D) mm
Supplied accessories:
Operation manual

VIDEO CAMERAS
AC cable

CMA-H10 Connectors: CAMERA (26-pin)

VIDEO OUT (BNC)
Camera adaptor for DXC-H10 SYNC IN/OUT (BNC)
•Transmits DC power and video sync TRIGGER INPUT (BNC)
signals between the camera and the WEN PULSE OUTPUT (BNC)
adaptor with a CCZ-A cable REMOTE (mini DIN 8-pin)
•Maximum cable length: 100 m with DC out: 15 V
CCZ-A100 cable to camera Power requirements:
•19-inch EIA standard rack mountable 120 V AC, 50/60 Hz
Power consumption:
40 W (AC), 30 W (DC)
Dimensions: 210 (W) × 44 (H) × 210 (D) mm
(8 3⁄8 × 1 3⁄4 × 8 3⁄8 inches)
Mass: 1.4 kg (3 lb 1 oz)
Supplied accessories:
AC power cord
Operation manual

CMA-D2CE Connectors: CAMERA (12-pin MULTI)

CAMERA (4-pin DIN)
Camera adaptor for DXC-9100/950P/ VIDEO OUT (BNC)
107AP/LS1P S VIDEO OUT
•Supplies DC power with a CCDC cable to (Mini DIN 4-pin)
cameras GEN-LOCK IN (BNC)
•Transmits DC power and video/sync DC out: 13 V, 1.3 A
signals between the camera and the Power requirements:
AC 100 to 240 V, 50/60 Hz
adaptor with a CCMC cable
Power consumption:
•Maximum cable length: 24.5 W
100 m with CCDC-100A cable Dimensions: 210(W) ç 50(H) ç 200(D) mm
25 m with CCMC-12P25 cable (83/8 ç 2 ç 77/8 inches)
•19-inch EIA standard rack mountable Mass: 1.1 kg (2 lb 7 oz)
Supplied accessories:
AC power cord
Operation manual

YS-W150P Connectors: CAMERA IN (BNC)

VIDEO OUT (BNC × 2)
AC adaptor for DXC-107AP SYNC IN/OUT (BNC, loop-through,
•Power supply and video/sync signal 75 Ω ON/OFF)
transmission by connecting to the camera Power requirements:
with a single coaxial cable AC 220 to 240 V, 50Hz
•Internal or external synchronization with VS Power consumption:
or AC line lock 15 W
•Extends the cable length up to 600 metres Operating temperature:
by using 7C-2V coaxial cable -10 °C to 50 °C (14 °F to 122 °F)
Maximum cable length:
300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Dimensions: 212(W) × 52(H) × 330(D) mm
(8 3⁄8 × 2 1⁄8 × 13 inches)
Mass: 1.9 kg (4 lb 3 oz)

–85–
 4. Sensor camera accessories
YS-W250P Connectors: CAMERA IN 1 to 4 (BNC ç 4)
VIDEO OUT A 1 to 4 (BNC ç 4)
AC adaptor for DXC-107AP VIDEO OUT B 1 to 4 (BNC ç 4)
•Power supply and video/sync signal SYNC IN/OUT (BNC, loop-through,
transmission by connecting to the camera 75 Ω ON/OFF switch)
with a single coaxial cable •Up to four Power requirements:
cameras can be connected •Internal or AC 220 to 240 V, 50 Hz
external synchronization with VS or AC line Power consumption:
lock •Extends the cable lengh up to 300 m 48 W
with 5C-2V coaxial cable Dimensions: 424 (W) ç 52(H) ç 330(D) mm
(163/4 ç 21/8 ç 13 inches)
Mass: 3.6 kg (7 lb 15 oz)
VIDEO CAMERAS

AC-E90HG
Camera adaptor for the DXC-LS1P
•Supplies DC power to the DXC-LS1P

DC out: 9 V, 800 mA
Power requirements:
AC 220 to 230 V, 50/60 Hz
Power consumption:
14 W
Dimensions: 58 × 86 × 50.5 mm
(2 3⁄8 × 3 1⁄2 × 2 inches)
Mass: 500 g (1 lb 2 oz)
Cable length: 2 m

RM-C950 Control: IRIS (AUTO/MANUAL)

ZOOM
Remote control unit FOCUS
•Full remote control of the DXC-9100P COLOUR BAR
/950P/H10/390P camera functions and lens MENU DISPLAY
GAIN (STEP/AGC/ISO)
zoom/focus/iris functions via RS-232C SHUTTER SPEED
•Facilitated operation with knob control of (OFF/STEP/LONG
gain, detail, master pedestal, red and blue EXP/C.SCAN/CCD IRIS)
AE WINDOW KNEE
gain functions •A printer button is provided (LARGE/MEDIUM/SPOT) G. SYNC
MEMORY BANK
•Power is supplied through the DXC-9100P/ FIELD/FRAME (CCD
MEMORY PROTECT
950P connected to the CMA-D2CE Camera INTEGRATION MODE)
COLOUR TEMPERATURE DATA SEND
Adaptor or CCU-M5P Remote Control Unit (3200 K/5600 K) D-SUB OUTPUT (VBS/Y/C,
WHITE BALANCE RGB/COMPONENT)
Power requirements: (AUTO/MANUAL/ATW) BAUD RATE
DC 12 V (supplied from LINEAR MATRIX FLASH
DXC-9100P/950P connected to SHADING COMPENSATION PRINTER TRIGGER
CMA-D2CE or CCU-M5P or DXC-H10 MASTER PEDESTAL Mass: Approx. 400 g (14 oz)
connected to CMA-H10/CMA-D3CE DETAIL Dimensions: 212(W) ç 41(H) ç 132(D) mm
connected to DXC-390P) H. PHASE (83/8 ç 25/8 ç 51/4 inches)
Operating temperature: SC PHASE Supplied accessories:
≈5 to 45°C (23 to 113°F) FINE Connection cable (3 m)
Connectors: CAMERA (8-pin) GAMMA Operation manual

LO-UCMT
C-mount adaptor for DXC-LS1P
•For mounting C-mount type lens on the
DXC-LS1P

–86–
4. Sensor camera accessories
MVA-12
Video camera microscope adaptor
•For 2/3-inch video camera with C-mount
(DXC-107AP*)

Video camera mount:

C-mount
Applicable microscope:
Biological or metallurgical
MVA-12
microscope with straight tube
Dimensions: 48(dia.) ç 98(L) mm

VIDEO CAMERAS
(115/16 ç 37/8 inches)
Mass: 120 g (4.2 oz)

* Although the MVA-12 can also be used with the

DXC-107AP(1/2-inch camera), the effective
viewing area should be adjusted.

MVAC-33 series
Coupler
•MVAC-33-N: For NIKON microscopes
except the SMZ-10 series
•MVAC-33-SM: For NIKON SMZ-10 series
microscopes
•MVAC-33-O: For OLYMPUS microscopes
•Used with the MVA-12/20/33/40/41A

Dimensions: MVAC-33-N;
48(dia.) ç 44(L) mm
(115/16 ç 13/4 inches)
MVAC-33-SM;
47(dia) ç 87.5(L) mm
(17/8 ç 31/2 inches)
MVAC-33-O;
55(dia.) ç 48(L) mm
(21/4 ç 115/16 inches) MVAC-33-N MVAC-33-SM MVAC-33-O
Mass: MVAC-33-N; 50 g (1.8 oz)
MVAC-33-SM; 125 g (5 oz)
MVAC-33-O; 100 g (3.6 oz)

ZBB and ZSV

Coupler
•ZBB: For Zeiss microscopes except the
AXIOVERT 100/135 series and SV series
•ZSV: For Zeiss AXIOVERT 100/135 series
and SV series microscopes
•Used with the MVA-12/20/33/40/41A

Dimensions: ZBB;
62(dia.) ç 110(L) mm
(21/2 ç 43/8 inches)
ZSV;
52(dia) ç 131(L) mm
(21/8 ç 41/4 inches)

ZBB ZSV

MVA-40
Microscope adaptor
•For mounting the DXC-327BP/9100P/
950P series onto various types of
microscopes
•Automatic/manual light control

Dimensions: 74 (dia.) ç 108(L) mm

(max. width of 116 mm)
(3 ç 43/8 inches)
(max. width of 4 5/8 inches)
Mass: 600 g (1 lb 5 oz)

–87–
 4. Sensor camera accessories
MVA-41A
Microscope adaptor
•For mounting the DXC-327BP/9100P/
950P series onto various types of
microscopes

Dimensions: 50(dia.) ç 77(L) mm

(2 ç 31/8 inches)
Mass: 180 g (6 oz)
VIDEO CAMERAS

MVA-690
Operation microscope adaptor
(one way)
•For 2/3-inch video camera with bayonet
mount (DXC-H10)
•For Carl Zeiss OPMI series/TOPCON 600
series

Video camera mount: Bayonet

Applicable microscope: Operation microscope
Dimensions: 147.5 (W) × 98.5 (H) × 50 (D) mm
(5 7⁄8 × 4 × 2 inches)
Mass: 590 g (1 lb 5 oz)

MVA-265
Operation microscope adaptor (one way)
•For 1/2-inch video camera with bayonet
mount (DXC-9100P/950P)
•For Carl Zeiss OPMI series/TOPCON 600
series

Video camera mount: Bayonet

Applicable microscope: Operation microscope
Dimensions: 148(W) ç 92(H) ç 50(D) mm
(57/8 ç 35/8 ç 2 inches)
Mass: 550 g (1 lb 3 oz)

MVA-380
Operation microscope adaptor
(two way)
•For 2/3-inch video camera with bayonet
mount
•For Carl Zeiss OPMI series/TOPCON 600
series
•Focus can be remotely controlled by the
supplied remote controller

Video camera mount: Bayonet

Applicable microscope: Operation microscope
Dimensions: 70 (W) × 94 (H) × 184 (D) mm
(2 7⁄8 × 3 3⁄4 × 7 1⁄4 inches)
Mass: 750 g (1 lb 10 oz)

–88–
4. Sensor camera accessories
LENSES FOR DXC-H10 (2/3-inch Bayonet mount type)

VIDEO CAMERAS
VCL-04UVM VCL-12UVM
Mount Ultra mount Ultra mount
Focal length 4 mm 12 mm
Maximum aperture ratio 1.4 2.0
Filter size M10.5 x 0.5 mm M10.5 x 0.5 mm
Back focal length 5.00 mm (IN AIR) 10.82 mm (IN AIR)
Focusing range 55 mm ~ ∞ 200 mm ~ ∞
Mass 4 g (0.14 oz) 5 g (0.17 oz)
Dimensions: 12 (dia) × 14 (L) mm 12 (dia) × 22 (L) mm
(1⁄2 × 9⁄16 inches) (1⁄2 × 29⁄32 inches)

LENSES FOR DXC-950P (1/2-inch Bayonet mount type)

VCL-707BXM S16 × 6.7BMD-D38 VCL-714BXEA VCL-717BXEA

Mount Bayonet Bayonet Bayonet Bayonet
Focal length 7.5 to 52.5 mm 6.7 to 107 mm 7.5 to 105 mm 7 to 119 mm
Zoom ratio 7ç 16ç 14ç 17ç
Zoom control Manual Remote Remote Remote
Focus control Manual Remote Remote Remote
Iris control Manual Remote Remote Remote
Maximum aperture ratio 1.6 1.4 1.4 1.4
Minimum object distance 0.3 m 0.9 m 1.1 m 0.95 m
Macro Not applicable Applicable Applicable Not Applicable
Filter size M58 ç 0.75 mm M77 ç 0.75 mm M72 ç 0.75 mm M86 ç 1.0 mm
Mass 560 g (1 lb 4 oz) 1.25 kg (2.7 lb) 1.13 kg (2 lb 6 oz) 1.7kg (3 lb 12 oz)
60(dia.) ç 125(L) mm 120(dia.) ç 165 (L) mm 110(dia.) ç 185.9(L) mm 107(W) ç 117(H) ç 181.5(D) mm
Dimensions
(23/8 ç 5 inches) (43/4 ç 61/2 inches) (43/8 ç 73/8 inches) (41/4 ç 45/8 ç 71/4 inches)
Notes — Zoom/Focus/Iris functions can be remotely controlled from the RM-C950

–89–
 4. Sensor camera accessories

Video camera accessory combinations

DXC-D30P/D30WSP DXC-637P DXC-327BP DXC-950P DXC-107AP DXC-9100P DXC-LS1P DXC-H10 DXC-390P
control unit

CCU-TX7P } }
Camera

CCU-M7P }*1 }*1 }*2

CCU-M5P }*5 } } } }
CMA-D3CE }
CMA-H10 }
AC adaptor

CMA-8ACE
VIDEO CAMERAS

} } }
CMA-D2CE } } } } }
CMA-D7CE }
YS-W250P }
DXF-701CE }
Viewfinder

DXF-601CE } }
DXF-41 } }
DXF-51 } }
LC-420
Carrying

}
case

LC-421 } }
LC-304SFT } } }
VCT-12
adaptor
Tripod

VCT-14 } } }
VCT-U14 } } }
Inter-
headset
com

DR-100 } } }
MVA-12 !*3
Microscope/endoscope

MVAC-33 } } } } } }
MVA-40 } } }
adaptor

MVA-41A } } }
MVA-265 } }
MVA-690 }
ZBB/ZSV } } } } } }
DC-520 } } }
CAC-4 } } }
CAC-12 } } }
RM-M7G } }*1 }*2
CA-327P }*4 }*4 }*4
CA-537P } } }
Others

CA-511 } } }
CA-512P } }
CA-513 } } }
CA-325AP } } }
CA-325B } } }
LO-32BMT } } }
LO-UCMT }
RM-C950 } } }

} Recommendable ! Usable
*1 Gamma control cannot be used.
*2 Knee and gamma controls cannot be used.
*3 Although the MVA-12 is the Microscope Adaptor for 2/3-inch video cameras, it can also be used with the DXC-107AP. In this case, the effective viewing area is
changed.
*4 Available for CA-327P models with serial No. 40101 and above.
*5 Matrix (STD, H.SAT, FL) cannot be controlled.

–90–
SECTION 3 NON-LINEAR/EDITOR/DME/SWITCHER
1. Non-linear Editing System
ES-7 ...................................................................92
ES-3 ...................................................................94

2. Editing Control Units

RM-450A ............................................................95
PVE-500 .............................................................96
FXE-120P...........................................................97
IF-FXE2 ..............................................................98

3. DME/Switchers
3-1.Digital multi effects/switcher system
DFS-700P...........................................................99
DFS-500P.........................................................100
DFS-300P.........................................................101
3-2.Composite/Component Video Switchers

NON-LINEAR/
EDITOR/DME/
SWITCHER
BVS-3200P/3200CP.........................................102
BVS-3100P.......................................................102
3-3.Special effects systems
SEG-2550AP....................................................103

4. Chromakeyer
DCK-500P ........................................................104

–91–
 1. Non-linear Editing System
ES-7
EditStation™
•The digital system for power production •Direct Digital Link
with DSR-60P/80P/85P VTR •x4 Transferring capability
when combined with the DSR-85P VTR •High picture quality
•Hybrid operation capability including the unique Disk
B-roll™ operation •SDI and SDTI (QSDI) digital interface
capability with optional boards •2-channel playback and
1-channel recording for real-time layering •Sophisticated
Graphical User Interface (GUI) provided for efficient
operation •ClipLink™ operation to save valuable disk space
and time •Superb performance DME Switcher •Multiple
input/output formats provided •Direct touch graphics function
to enable graphics creation to be performed directly on the
live video •Variable compression rate •Optional ESDraw kit
NON-LINEAR/
EDITOR/DME/

available in addition to the standard TextComposer •Control

SWITCHER

panel available for intuitive operation •Fixed Speed DMC

•16:9 editing mode •User Programmble Effect
Supplied accessories: Power cord
Mouse
Keyboard
Extansion cables for keyboard and mouse (4m)
Parallel GPI D-sub 15-pin connector
Software and online manual (CD-ROM disc)
Windows NT package (CD-ROM disc and manual)
Operating instructions

Optional accessories: Control Panel ESBK-7011

Basic DME Switcher Board ESBK-7021
3D Effect Board for Basic DME Switcher Board
ESBK-7022
Advanced DME Switcher Board ESBK-7023
3D Effect Board for Advanced DME Switcher Board
ESBK-7024
SDTI (QSDI) Interface Board ESBK-7031
SDI Interface Board ESBK-7032
Disk Recorder Board ESBK-7041
Disk Unit ESBK-7046
SCSI Option ESBK-7051
Ethernet Option ESBK-7052
SCSI Cable ESBK-7053
Additional Memory Set ESBK-7054
ESDraw ESBK-7071
EditStation Operation Manual ESBK-7091E
ESDraw Operation Manual ESBK-7092E
Rack Mount Kit for ES-7 RMM-ES7
Rack Mount Kit for ESBK-7046 RMM-ES701

Specification
General
Power requirement: AC 220/240V, 50/60Hz
Operating voltage: AC 180 to 264V, 48 to 63Hz
Power consumption: Main Unit (ES-7): Approx. 450W
Disk Unit (ESBK-7046): Approx. 100W
Operating temperature: 5 to 35°C (41 to 95°F)
Dimensions: Main Unit (ES-7):
424 (W) × 431.6 (H) × 478 (D) mm
(163⁄4 × 17 × 187⁄8 inches)
Disk Unit (ESBK-7046):
424 (W) × 88 (H) × 478 (D) mm
(163⁄4 × 31⁄2 × 187⁄8 inches)
Control Panel (ESBK-7011):
Rear Panel of ES-7
372 (W) × 76 (H) × 228 (D) mm
(143⁄4 × 3 × 9 inches)
Mass: Main Unit (ES-7):
35 kg (77 lb 3 oz)
Disk Unit (ESBK-7046):
14 kg (30 lb 14 oz)
Control panel (ESBK-7011):
1.7 kg (3 lb 12 oz)
PC
CPU: Pentium 200MHz MMX
OS: Windows NT4.0
Memory: 64MB
Hard disk drive: 2 GB
Floppy disk drive: 1 × 720KB/1.44MB
CD-ROM drive: 1 × ATAPI, Quadruple (x24) speed
Card slot: 32-bit PCI bus (33MHz) and 16-bit ISA bus
VGA: 1024 × 768, 65K colors
Mouse: 1 × Mini Din 6-pin

–92–
1. Non-linear Editing System
Keyboard: 1 × Mini Din 6-pin
Video
Analogue video inputs: 3 sources (P1/P2/R) selectable from Y/R-Y/B-Y,
Composite or Y/C
BNC: Y/R-Y/B-Y, Composite
MiniDin 4-pin: Y/C
1 sources (AUX) selectable from Composite,
Y/R-Y/B-Y or G/B/R/Sync., BNC
1 × Gen. Lock IN, BNC
Digital video inputs: 2 (P1, P2/R) × SDTI (QSDI), BNC
3 (P1, P2, R) × SDI, BNC
Analogue video outputs: PGM & MONITOR outputs, Y/R-Y/B-Y,
G/B/R/Sync., Composite and Y/C
ESBK-7011 BNC: Y/R-Y/B-Y, G/B/R/Sync., Composite
MiniDin 4-pin: Y/C
4 × Black Burst output, BNC
Digital video outputs: 1 × SDI PGM output (R), BNC
1 × SDTI (QSDI) PGM output (R), BNC

Audio

NON-LINEAR/
EDITOR/DME/
Audio: Up to 22-ch input and 4-ch output

SWITCHER
Analogue audio inputs: 4-ch × 3 sources (P1/P2/R), XLR 3-pin
2-ch × 1 source (AUX), XLR 3-pin
Digital audio inputs: 2-ch × 1 source (AUX), selectable from AES/EBU
ESBK-7046 or IEC-958
Analogue audio outputs: LINE OUT: 4-ch, XLR 3-pin
MONITOR OUT: 2-ch (1/3 & 2/4), Pin-jack
Digital audio outputs: Multiplied as SDI/SDTI (QSDI)

Compression
Compression scheme: DV Compression

DME Switcher
Basic DME Switcher: Y:R-Y:B-Y=4:1:1, 13.5MHz, 8-bit
(ESBK-7021) Chromakey & luminance key: 1 bit (linear key)
Downstream keyer: 8 bit
Advanced DME Switcher: Y:R-Y:B-Y=4:2:2, 13.5MHz, 8-bit
(ESBK-7023) Chromakey & luminance key: 8 bit (linear key)
Downstream keyer: 8 bit

Control
P1, P2, AUX & R: RS-422A, D-Sub 9-pin
GPI (Serial): RS-232C, D-Sub 9-pin
GPI (Parallel): Active low TTL, D-Sub 9-pin
Control Panel: D-Sub 15-pin

Graphics/title
Pixel format: 4:2:2:4 (Y/R-Y/B-Y/Alpha)
Font: True type
Import format: BMP, TGA, TIFF, PICT, JPEG

Others
EDL Import/export format: Sony BVE-9100 Format

–93–
 1. Non-linear Editing System
ES-3
EditStation
•Flexible non-linear editing system •Offers DV compression
operation and uncompressed operation(option) •Direct
Digital Link with DVCAM VTR •High picture quality
•Accelerated rendering effects •SDI and SDTI(QSDI) digital
interface capability with option •Sophisticated Graphical User
Interface (GUI) provided for efficient operation •ClipLink
operation to save valuable disk space and time •Multiple
input/output formats provided •Video special effects
(including third-party effect software) •Standard Titler
•Control panel available for intuitive operation •Text EDL
output •Open software architecture •Support of
QuickTime/AVI file format •Multiple Languages for GUI
Supplied items: Main unit
NON-LINEAR/
EDITOR/DME/
SWITCHER

PCI interface board

ES-3 application software
Title software
Installation instructions
AC power code
Modular cable
Cable splitter
Optional accessories: ESBK-3021 Rendering acclerator card
ESBK-3031 SDI/SDTI (QSDI) Interface option
ESBK-7011 Control panel

Specifications
General
Main Unit
Power Requirements: AC 220-240 V
50/60 Hz
Power Consumption: 100 W
Operating Temperature: 5~35 °C (41~95 °F)
Dimensions: 442 (W) × 134 (H) × 365 (H) mm (without projection)
(17 1⁄2 × 5 3⁄8 × 14 3⁄8 inches)
Mass: 11 kg (24 lb 4 oz)
Video Signal Standard: PAL
Video Processing: Y:R-Y:B-Y=4:2:2, 13.5 MHz, 10-bit
Audio Processing: 48 kHz, 16-bit
Compression Scheme: DV compression (fixed 25 Mbit/s)
Uncompressed with optional ESBK-3032
PCI Interface Board
Standard: PC/AT PCI Rev 2.1 Titler
Dimensions: PCI Full size Pixel Format: Y/R-Y/B-Y/Alpha=4:2:2:4
Display Area: 720x576 for PAL
Signal Connectors Font: True type
Analog Inputs Import Format: BMP, TGA, TIFF
COMPOSITE: BNC
Y, R-Y, B-Y: BNC
S VIDEO: Mini-DIN 4-pin
GEN LOCK IN, THRU OUT:
BNC
AUDIO CH-1, 2, 3, 4:
XLR 3-pin
Analog Outputs
COMPOSITE: BNC
Y, R-Y, B-Y: BNC
S VIDEO: Mini-DIN 4-pin
B.B. OUT: BNC
MONITOR: Mini-DIN 4-pin (at PCI interface board)
AUDIO CH-1, 2: XLR 3-pin (2)
AUDIO MONITOR: Stereo Mini Jack (at Cable splitter )
Digital Inputs
SDI/SDTI(QSDI): BNC * ESBK-3031 is required.
DV IN: DV-type 4-pin Jack
AES/EBU: XLR 3-pin
Digital Outputs
SDI/ SDTI(QSDI): BNC * ESBK-3031 is required.
AES/EBU: XLR 3-pin
Digital Input/Output
DV IN/OUT: DV-type 4-pin Jack

Control Connectors
PLAYER REMOTE: D-sub 9-pin, RS-422A
RECORDER REMOTE: D-sub 9-pin, RS-422A
PC INTERFACE: Modular Jack 8-pin
MAIN UNIT I/F: Modular Jack 8-pin
(at PCI interface board)
CONTROL PANEL: D-sub 15-pin (at PCI interface board)

–94–
2. Editing Control Units
RM-450A
Editing control unit
•Can be connected to 9-pin equipped editing VTR on both
the player side and recorder side •The RM-450A not only
allows CTL based editing but also makes Time Code editing
possible •Provides the Relative Time Code (RTC) editing
mode, in which time code is used as an edit reference and
time code progress is like CTL on the LED counter •The
AUDIO COUNTER RESET function automatically sets the
editing point first designated to “0:00:00:00” •Can use the
Assemble and Insert (V/A1/A2) edit modes, and provides
editing functions such as editing IN-POINT/OUT-POINT
ENTRY, PREVIEW, TRIM, AUTO EDIT/END, REVIEW/
JUMP, GO TO, AUDIO SPLIT, and LAST EDIT •The
function keys are laid out to enable easy operation •Provides

NON-LINEAR/
EDITOR/DME/
the JOG/SHUTTLE dials on both the player side and

SWITCHER
recorder side •Accepts REF. VIDEO IN (reference video
input) for synchronized operation •Can memorize the pinch
on delay and adjust the editing in-point automatically •Mode
setting is very easy and convenient when using the preset
switches on the front panel •A cue pulse out is provided for
external equipment •Indicates the “Error” and error number
on the LED counter along with a warning sound •A built-in
self-diagnostic function improves serviceability and make
maintenance easy
Supplied accessories: AC power cord
Error message chart
Operation manual

Optional accessories: 9-pin remote control cable RCC-5G/10G/30G

Rack mount kit RMM-450
(for 19-inch EIA and SONY SU-512 rack)

Specifications
Power requirements: AC 198 to 264V, 48 to 63Hz
Power consumption: 11W
Mass: Approx. 3.1 kg (61 lb 13 oz)
Dimensions: 390 (W) × 93 (H) × 265 (D) mm
(15 × 33⁄4 × 101⁄2 inches)
Operating temperature: 0 to 40°C (32 to 104°F)
Edit reference: CTL, SMPTE/EBU LTC, VITC
Reference video input: 0.5Vp-p to 2.0Vp-p negative, 75Ω, unbalanced
External sync input: 0.5Vp-p to 5.0Vp-p negative, 75Ω, unbalanced
Cue pulse signal: Active low: low level 0 to 0.5V/high 3.5 to 5.0V

–95–
 2. Editing Control Units
PVE-500
Editing control unit
•Three VTR control capability in A/B roll editing •Serial
switcher interface via 9-pin RS-422A connection •Both
parallel and serial audio mixer interface capability •Handles
TC (Time Code), CTL (Control Track Signal), and RTC
(Relative Time Code) as editing reference •Assemble and
Insert (V, A1, A2) editing capability •Features variable speed
control over VTRs equipped with Dynamic Tracking function
•Up to 99 edits can be stored in the built-in EDL memory
•Audio split edit capability offers effective insertion of sound
effects •Snapshot memory number in the DFS-500P and the
DFS-300P can be stored and recalled by the Edit Number
•Reference video input allows synchronized operation with
other equipments •Equipped with an RS-232C interface
NON-LINEAR/
EDITOR/DME/

allowing SAVE/LOAD of the EDL data onto a floppy disk •A

SWITCHER

GPI output enables basic control of peripheral equipments

such as audio tape recorders and title generators which
cannot be directly interfaced with the PVE-500 •The two
search dial operation enables quick and easy access to the
edit points
Supplied accessories: AC power cord
Operation manual
Optional accessories: Audio mixer control cable RCC-5AA
9-pin remote control cable RCC-5/10/30G
Rack mount metal RMM-500

Specification
General
Power requirements: AC 100/120/220 to 240 V ±10 %, 47.5 to 63 Hz
Power consumption: 11W maximum
Operating temperature: 5 to 40°C (41 to 104°F)
Storage temperature: –20 to 60°C (–4 to 140°F)
Dimensions: 390 (W) × 94 (H) × 265 (D) mm
(153⁄8 × 33⁄4 × 101⁄2 inches)
Mass: 3.2 kg (7 lb 8 oz)
Systems
Editing reference: CTL, RTC, SMPTE/EBU Time Code
Edit accuracy: ±0 frame with time code
±1 frame with CTL
Memory capacity: 99 events
Controls
VTR interface: RS-422A 9-pin remote connector
Switcher interface: RS-422A 9-pin remote connector
Mixer interface: 9-pin serial/parallel switchable
Controllalble VTRs: 1 recorder and up to 2 players

–96–
2. Editing Control Units
FXE-120P
•Integration of an editing controller, video switcher, audio
mixer and digital effects generator •Three VTR control
(RS-422A/RS-232C) •LANC (Local Application Control bus
system) interface for controlling home-use LANC VTRs and
camcorders as player VTRs •Time code based editing
•Equipped with two buses •GPI input/output •8-bit
quantizing, 4:1:1 digital processing •Built-in Frame
Synchronizers allow editing without a Time Base Corrector
•140 wipe patterns •Digital effects (Mix Effect/Fade Effect/
Input Effects) •Built-in chromakeyer and luminance keyer
•Colour correction capability •25 different colour background
•Editing memory for 99 events •Saving/ loading of EDL Data
is possible
Supplied Accessories AC power cord (1)

NON-LINEAR/
EDITOR/DME/
SWITCHER
Instruction manual (1)
Userís guide (1)
LANC cord (2)
Optional Accessories RCC-5/10/30G RS-422A remote cable
SMF-3036C (RS-232C remote cable, 9-pin to 25-pin)

Specifications
General
Signal system: PAL
Power requirements: AC 220 to 240 V ± 10%, 50/60Hz ± 5%
Power consumption: Maximum 65 W Video Outputs
Operating temperature: 5 to 40°C (41 to 104°F) Composite: BNC (3), unbalanced
Storage temperature: -20 to 60°C (-4 to 140°F) (PGM 1, 2, MONITOR)
Dimensions: 424 (W) × 138.5 (H) × 437.5 (D) mm Video: 1.0 Vp-p, 75 ohms
(16 3⁄4 × 5 1⁄2 × 17 1⁄4 inches) Sync: 0.3 Vp-p
Mass: Approx. 7.3 kg (16 lb 1 oz) Burst: 0.3 Vp-p
S-Video 4-pin (2), unbalanced
Systems Sync: 0.3 Vp-p
Time counter: Internal time counter (3) Burst: 0.3 Vp-p
Time count display range: Black bust out: BNC (4), unbalanced
Time code: 00:00:00:00 to 23:59:59:24 Sync: 0.3 Vp-p,
CTL: ± 9:59:59:24 Full edit mode Burst: 0.3 Vp-p
Editing mode: Assemble edit: Video, Audio 1/2
Insert Edit: Video Audio 1/2 Audio
First edit, Time code insert Audio Inputs (stereo): AUDIO L/R INPUT (RCA PIN jack), (2 channels (5))
Split edit, Dynamic Motion Control (DMC) PLAYER 1 MAIN (2), SUB (2)
Edit type: MIX, WIPE, SYNC-ROLL, CUT, MANUAL 1st Edit, PLAYER 2 MAIN (2), SUB (2)
Audio Split Edit, DMC Control RECORDER (2)
Edit reference: CTL, LTC, SMPTE/EBU time code, 8mm time code, AUX 1 (2)
RC time code, DV time code AUX 2 (2)
Edit Accuracy: RS-422A: ±0 frame with TC, ±1 frame with CTL Input impedance: selectable with 600 Ω terminal
RS-232C: ±1 frame with TC switch
LANC: ±5 frame with RC time code Input level: -7.5 dBs (input impedance 47 kΩ or
Transition time range: 0 to 999 (unit: frames) above, 600 kΩ switch OFF)
Pinch-on Delay: Simultaneous measurement of pinch-on delay for up +4dBs (input impedance 600Ω, 600 Ω
to three VCRs connected to RS-422A/RS-232C/ switch ON)
LANC connectors Mic Input (monaural): Monaural phono (1), unbalanced
EDL memory capacity: 99 edits Input level: -60 dBs,
Split edit reference: Audio or Video input Input impedance: more than 4.3 kΩ or above
Audio Outputs (stereo) AUDIO L/R OUTPUT (PIN jack) (6)
Control PGM 1(2), PGM 2(2), MONITOR (2)
VTR Interface: RS-422A: D-sub 9-pin Output level: -7.5 dB/+4.0 dB selectable
RS-232C: D-sub 9-pin (PGM1, PGM2)
LANC: stereo mini-mini jack
Controllable VTR: 1 recorder, up to 2 players Signal Processing
GPI interface: GPI IN (BNC) Sampling rate: Y: 910 fH ( fH = 15,625 kHz)
GPI OUT (BNC) (2) R-Y/ B-Y: 1/4 x 910 fH
EDL Interface: EDL IN/OUT (D-sub 9-pin) Quantization: Y/R-Y/B-Y: 8-bit
Frequency response: 0 to 5 MHz +1 dB/ -4 dB
Video Signal to noise ratio: More than 53 dB
Video inputs Y/C delay: Less than 50 ns (Composite)
Composite: BNC (4), unbalanced
(PLAYER 1, PLAYER 2, AUX1, RECORDER) Recommended LANC VTR for recorder: DSR-30P
Video: 1.0 Vp-p, 75 Ω
Sync: 0.3 Vp-p
Burst: 0.3 Vp-p
S-Video 4-pin (4), unbalanced
(PLAYER 1, PLAYER 2, AUX1, RECORDER)
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω
Burst sync: 0.3 Vp-p

–97–
 2. Editing Control Units
IF-FXE2
LANC Interface Box
•Converts the RS-422A protocol to LANC protocol •Supports
connection between recorder LANC VTR’s and FXE-
100UPG*1/FXE-120P •Supports connection between player
LANC VTR's and RM-450A/PVE-500
*1 FXE-100UGP is an FXE-100P which is upgraded with FXE-KIT1.
Please contact your nearest Sony office.

Supplied Accessories: LANC Connecting Cord (Stereo mini-mini) (1)

AC Power Adaptor (1)
Instruction Manual (1)
List of the recommended products (1)

Optional Accessories: RS-422A Remote Control Cable: RCC-5G/10G/30G

Specifications
NON-LINEAR/
EDITOR/DME/

General
SWITCHER

Mass: Approx. 500 g (17.6 oz)

Dimensions: Approx. 106 (W) × 40 (H) × 163 (D) mm
(4 1⁄4 × 15⁄8 × 61⁄2 inches)
Power requirements: DC 6 V
Power consumption: Less than 3W (with the supplied AC power adaptor)
Operating temperature: 5 C to 40°C
Storage temperature: –20 C to 60°C
Operational position: Horizontal or vertical

Connectors
RS-422A port: D Sub 9-pin (1)
LANC port: Stereo mini-mini jack (1)
DC input: 6V (1)

Function Switches
Power: Seesaw Switch (1)
Learn: Push Switch (1) and LED (1)
Preset: Dip Switch (4 bit)

–98–
3-1. Digital multi effects/switcher systems
DFS-700P
DME Switcher
•Video switcher equipped with powerful digital multi effector
•Full digital component processing from input to output at
4:2:2:4 (video and key) •No need for external A/D converters
•Incorporates thousands of factory preset effect patterns
including non-linear digital effects •The perfect companion
for Sony digital VTRs and servers •Real-time system,
capable of delivering effects in an instant •Eight standard
inputs include four SDIs and four analog components •Eight
standard outputs include two SDIs, two analog components,
two analog composites, and two Y/Cs •Can be used with
Sony BVE-2000/P and PVE-500/P editors via the serial
interface •Optional boards are prepared to change the types
of inputs (BKDF-701/702P) •Chroma keyer, Y/U/V color

NON-LINEAR/
EDITOR/DME/
correction, down stream keyer, fade-to-black, and frame

SWITCHER
memory are included •2nd channel DME board prepared as
an option (BKDF-711) •3D video mapping effects board
prepared as an option (BKDF-712)
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board

Specifications
General
Power requirements: AC 220/240 V, 50/60 Hz S/N More than 50 dB (composite)
Operating voltage: AC 180 to 260 V, 47 to 63 Hz More than 55 dB (component, S-Video)
Power consumption: 200 W Y/C delay Less than 20 ns (component)
Operating temperature: 0 to 40 °C (32 to 104 °F) Less than 50 ns (composite, S-Video)
Dimensions: Control panel: 440 (W) × 121 (H) × 287 (D) mm
17 1⁄4 × 4 3⁄4 × 11 1⁄4 inches Control Signals
Processor unit: 440 × 132 × 520 mm Editor D-sub 9 pin x 1, RS-422A
17 1⁄4 × 5 1⁄4 × 20 1⁄2 inches GPI/T BNC type x 2, TTL Level
Mass: Control panel: 3 kg, 6 lb 10 oz Panel D-sub 25-pin x 1
Processor unit: 14 kg, 30 lb 14 oz Tally D-sub 25-pin x 1, Relay contact outputs x 8
Terminal USB B-type
Input Signals
VIDEO INPUTS
SDI: BNC type x 4 BKDF-701
270 Mb/s With the BKDF-701, the following 8 inputs can be added to
Component: BNC type x 4 (Y/R-Y/B-Y) the standard 8 inputs of the DFS-700/P, making the total
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.525 Vp-p, 75 Ω number of inputs 16. During use, any 8 of the 16 inputs can
DSK KEY IN: BNC type x 2, Loop-through, 1.0 Vp-p, 75 Ω be assigned to the control panel.
REF VIDEO: BNC type x 2, Loop-through connection
Sync: 0.3 Vp-p Input Signals
Burst: 0.3 Vp-p SDI: BNC type x 4
270 Mb/s
Output Signals Component: BNC type x 4 (Y/R-Y/B-Y)
PGM OUT Y: 1.0 Vp-p, 75 Ω, Sync negative
SDI: BNC type x 2 R-Y/B-Y: 0.525 Vp-p, 75 Ω
270 Mb/s
Component: BNC type x 2 (Y/R-Y/B-Y) BKDF-702P
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.525 Vp-p, 75 Ω With the BKDF-702P, the following 4 inputs (composite or
Composite: BNC type x 2 S-Video) can be added to the standard 8 inputs of the
Video: 1.0 Vp-p, 75 Ω, Sync negative DFS-700P, making the total number of inputs 12. During use,
S-Video: DIN type x 2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
any 8 of the 12 inputs can be assigned to the control panel.
C: 0.3 Vp-p at burst, 75 Ω
Input Signals
CLEAN OUT: BNC type x 1
Composite: BNC type x 4
SDI: 270 Mb/s
Video: 1.0 Vp-p, 75 Ω, Sync negative
PREVIEW OUT: BNC type x 1, Composite
S-Video: DIN type x 4 (Y/C)
Video: 1.0 Vp-p, 75 , Sync negative
Y: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT: BNC type x 3
C: 0.3 Vp-p at burst, 75 Ω
Sync: 0.3 Vp-p, 75 Ω
Burst: 0.3 Vp-p, 75 Ω

Signal Processing
Sampling rate: Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization: Y/R-Y/B-Y: 8 bits
Linearity (Composite output):
DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB

–99–
 3-1. Digital multi effects/switcher systems
DFS-500P
DME switcher
•Video switcher equipped with powerful digital multi effector
•More than 300 factory preset effect patterns including
non-linear digital effects •Up to 40 manually created effect
patterns can be stored in the User Programme memory
system for subsequent recall •Built-in two frame synchronizer
accept non time base corrected video signals •4:1:1 digital
component processing realizes high picture quality •Accepts
component, composite and S-VIDEO signals to be
processed simultaneously •Composed of 2 busses and 4
primary inputs •15 original background patterns •Up to 99
panel status storage in the Snap Shot memory system
•Equipped with 5 individual colour matte generators •Built-in
title keyer •Equipped with fader lever to allow manual picture
NON-LINEAR/
EDITOR/DME/

transition •Perfect interface capabilities with BVE-3000P

SWITCHER

Rear Panel of Processor

Series •Simple A/B roll editing system with PVE-500
•Modular design composed of a control panel and a
processor unit •Down stream keyer function available with
optional board •Lighting, trail, shadow and drop border
effects are available with optional board
Typical preset patterns
mosaic, mirror, negative, solarization, posterization
picture in picture, ripple wipe, sphere, page turn, page roll, split, slide,
melt down, stream, flag

Supplied accessories: AC power cord

25-pin control cable, 10 m
Label 1 set
Operation Manual

Optional accessories: BKDF-501P Trail and lighting board

Provides drop border, shadow, trail and lighting
effects.
BKDF-504P DSK board
EXT KEY IN: BNC type 1.0Vp-p, 75Ω
Provides 8bit down stream keyer.
DSK KEY IN: BNC type 1.0Vp-p, 75Ω
BKDF-503 Rack mount kit
GEN LOCK IN: BNC type
Enables the control panel to be mounted onto
Sync: 0.3Vp-p
the editing console.
Burst : 0.3Vp-p
Output Signals
Specifications PGM OUT 1 and 2
Composite: BNC type
General VIDEO: 1.0Vp-p, 75Ω
Power requirements: AC 220/240V, 50/60Hz SYNC: 0.3Vp-p
Operating voltage: AC 180 to 264V, 48 to 63Hz BURST: 0.3Vp-p
Power consumption: 140W Y/C: 4-pin
Operating temperature: 0 to 40°C (32 to 104°F) Y: 1.0Vp-p, 75Ω
Dimensions: Control Panel: 424 (W) × 116 (H) × 344 (D) mm C: 0.3Vp-p, 75Ω
(163⁄4 × 45⁄8 × 135⁄8 inches) SYNC: 0.3Vp-p
Processor Unit: 424 (W) × 177 (H) × 450 (D) mm Component: 12-pin
(163⁄4 × 7 × 173⁄4 inches) Y: 1.0Vp-p, 75Ω
Mass: Control Panel: 3 kg (6 lb 10 oz) R-Y/B-Y: 0.525Vp-p, 75Ω
Processor Unit: 17 kg (35 lb 4 oz) KEY OUT: BNC type: 1.0Vp-p, 75Ω
Input Signals BLACK BURST OUT: BNC type
VIDEO INPUTS 1 through 4 SYNC: 0.3Vp-p, 75Ω
Composite: BNC type (1 in each) BURST: 0.3Vp-p, 75Ω
VIDEO: 1.0Vp-p, 75Ω Signal Processing
SYNC: 0.3Vp-p Sampling Rate: Y: 908fH (fH : 15.625 kHz)
BURST: 0.3Vp-p R-Y/B-Y: 1/4 × 908fH
Y/C: 4-pin (1 in each) Quantization: Y/R-Y/B-Y: 8 bits
Y: 1.0Vp-p, 75Ω Linearity (Composite output):
C: 0.3Vp-p, 75Ω DG: Less than 3.5% composite input
SYNC: 0.3Vp-p Less than 2% component/S input
Component: 12-pin (1 in each) DP: Less than 2.5°composite input
Y: 1.0Vp-p, 75Ω Less than 1° component/S input
R-Y/B-Y: 0.525Vp-p, 75Ω Cross talk: Less than -50dB
DSK VIDEO IN Frequency response: 0 to 5 MHz +0.5dB/–1dB
Composite/G/Y: BNC type S/N: More than 51dB (composite)
Composite: VIDEO 1.0Vp-p, 75Ω More than 55dB (Y/C, component)
SYNC 0.3Vp-p Y/C delay: Less than 20ns (component)
BURST 0.3Vp-p Less than 50ns (composite)
Y: 1.0Vp-p, 75Ω Control Signals
G: 0.7Vp-p, 75Ω Editor: 9-pin remote
B/B-Y: BNC type T1/T2, cue: BNC type
B-Y: 0.525Vp-p, 75Ω Control Panel: 25-pin remote
B: 0.7Vp-p, 75Ω
R/R-Y: BNC type
R-Y: 0.525Vp-p, 75Ω
R: 0.7Vp-p, 75Ω

–100–
3-1. Digital multi effects/switcher systems
DFS-300P
DME switcher
•Video switcher equipped with powerful digital multi effector
•More than 300 factory preset effect patterns including
2D digital effects •With the optional board BKDF-301P,
3D linear and non linear factory preset effect patterns can
be added •Up to 20 manually created effect patterns can be
stored in the User Programme memory system for
subsequent recall •With the optional board BKDF-301P, up
to 40 effect patterns can be manually created and stored in
the User Programme memory system •Built-in two frame
synchronizers accept non time base corrected video signals
•4:1:1 digital component processing realizes high picture
quality •Accepts component, composite and S-video signals
•Accepts RGB signals for graphic image data processing

NON-LINEAR/
EDITOR/DME/
•Composed of two busses and four primary inputs • 31

SWITCHER
original background patterns •Up to 99 snapshots can be
stored in the Snap Shot memory system •Equipped with five Rear Panel of Processor

individual colour matte generator •Built-in chromakeyer, title

keyer and colour correction controller •Equipped with fader
lever to allow manual picture transition •Provides simple A/B
roll or two machine editing system with PVE-500 •Modular
design composed of a control panel and a processor unit •8-
bit Down Stream Keyer function available with optional
board BKDF-504P •3D and non-linear effects are available
with optional board BKDF-301P
Typical preset patterns
mosaic, mirror, negative, solarization, posterization, split, slide, melt down,
stream, etc

Supplied accessories: AC power cable

25-pin control cable (10m)
Operation manual
Optional accessories: BKDF-301P 3D effect board DSK Video Inputs:
Provides 3D effect, non-linear effect Composite/G/Y (PAL)
BKDF-503 Rack mount kit Connector: BNC type (× 2, loop-through)
BKDF-504P DSK board Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Specifications Burst: 0.3Vp-p
Y: 1.0Vp-p, 75Ω
General G: 0.7Vp-p, 75Ω
Power requirements: AC220V or 240V, 50/60Hz B/B-Y Connector: BNC type
Operating Voltage: AC180 to 264V, 48 to 63Hz B-Y: 0.525Vp-p
Power consumption: 80W B: 0.7Vp-p, 75Ω
Operating temperature: 0 to 40˚C (32 to 104˚F) R/R-Y Connector: BNC type
Dimensions: Control panel: 424 (W) × 69 (H) × 287 (D) mm R-Y: 0.525Vp-p
(163⁄4 × 23⁄4 × 113⁄8 inches) R: 0.7Vp-p, 75Ω
Processor: 424 (W) × 132 (H) × 450 (D) mm EXT KEY IN/DSK KEY IN/KEY OUT:
(163⁄4 × 51⁄4 × 173⁄4 inches) Connector: BNC type (× 1, each)
Mass: Control panel: 2.3 kg (5 lb 1 oz) 1.0Vp-p, 75Ω
Processor: 13.0 kg (28 lb 10 oz) GEN LOCK IN: Connector: BNC type (× 2, loop-through)
Inputs/Outputs Video: 1.0Vp-p, 75Ω
Primary video inputs 1 to 3/Programme video outputs: Sync: 0.3Vp-p
Composite Connector: BNC type (× 1, each) Burst: 0.3Vp-p
Video: 1.0Vp-p, 75Ω BLACK BURST OUT 1 to 3:
Sync: 0.3Vp-p Connector: BNC type (× 3)
Burst: 0.3Vp-p Sync: 0.3Vp-p (75Ω)
S-video (Y/C) Connector: DIN-4-pin (× 1, each) Burst: 0.3Vp-p (75Ω)
Y: 1.0Vp-p, 75Ω Signal Processing
C: 0.3Vp-p, 75Ω, burst Frequency response: 0 to 5MHz (Ref. 1MHz) +0.5dB/–1dB
Sync:0.3Vp-p Linearity: DG 3.5% (composite input)
Component (Betacam) 2.0% (component/S input)
Connector: 12-pin (× 1, each) DP 2.5˚ (composite input)
Y: 1.0Vp-p, 75Ω 1.0˚ (component/S input)
R-Y/B-Y: 0.525Vp-p Crosstalk: –50dB
Primary video inputs 4: S/N: 51dB (composite)
Y/G Connector: BNC type 55dB (Y/C, component)
Y: 1.0Vp-p, 75Ω Y/C delay: Less than 20ns (component)
G: 0.7Vp-p, 75Ω Less than 50ns (composite)
R-Y/R Connector: BNC type Sampling rate: Y: 908fH (fH: 15.625kHz)
R-Y: 0.525Vp-p, 75Ω R-Y/B-Y: 1/4 × 908fH
R: 0.7Vp-p, 75Ω Quantization: Y/R-Y/B-Y: 8 bits
B-Y/B Connector: BNC type Control Signals
B-Y: 0.525Vp-p, 75Ω EDITOR: D-sub 9-pin, 9-pin remote (RS-422A)
B: 0.7Vp-p, 75Ω T1/CUE IN/T2 IN: BNC type (× 1, each), TTL level
Sync Connector: BNC type CONTROL PANEL: D-sub 25-pin, 25-pin rermote (RS-422A)
0.3 to 4.0Vp-p, 75Ω

–101–
 3-2. Composite/Component Video Switchers

BVS-3200P /3200CP
Composite/Component Video Switcher
•Choice of composite or component version:
BVS-3200P Composite Video Switcher
— Accepts composite video signals
BVS-3200CP Component Video Switcher
— Accepts composite or a combination of RGB,
Y/R-Y/B-Y component signals
— 12-pin Component Video Connector Inputs/Outputs
for Betacam VTRs are provided
•Ten Primary inputs (including colour black and colour background)
•One M/E and two KEY Busses/Processors (assignable) •KEY OVER
function •Two common EXT KEY sources and FILL available for both
KEYER •One EXT KEY source and FILL available for DSK •Ten basic
and eight matrix wipe patterns with modifiers •Fully adjustable internal
BOX MASK and EXT MASK inputs •Four COLOUR MATTE
GENERATORs for BACKGROUND, EFF/BORDER (KEY 1 and KEY
NON-LINEAR/
EDITOR/DME/

2), and DSK •CHROMAKEYER (RGB or Y/R-Y/B-Y selectable) •DSK

SWITCHER

with BORDER, DROP SHADOW, OUTLINE-2H/4H selectable •FADE

to BLACK (FTB) function •Auto Transition for M/E, DSK, and FTB
•RS-422A interface •Communication of E-File and initial panel Dimensions:
information with BVE-2000/9100 •DFS-500P interface •Four Black Control panel: Approx. 424 (W) × 111 (H) × 440 (D) mm
(163⁄4 × 41⁄8 × 173⁄8 inches)
Burst Outputs •GPI Input port for M/E, DSK, FTB, and SELECT •Four
Processor unit: BVS-3200P:
(BVS-3200CP)/two (BVS-3200P) PGM Outputs and one PVW Output Approx. 424 (W) × 132 (H) × 397 (D) mm
(163⁄4 × 51⁄4 × 153⁄4 inches)
Supplied accessories: AC power cord
BVS-3200CP:
Control panel cable (5m)
Approx. 424 (W) × 176 (H) × 450 (D) mm
Extension board
(163⁄4 × 7 × 173⁄4 inches)
Optional accessories: SWC-2530D Control panel cable (30m)
Mass:
RMM-3000 Rack mount kit
Control panel: Approx. 4.4 kg (9 lb 11 oz)
Processor unit: BVS-3200P:
Specifications Approx. 13 kg (28 lb 11 oz)
BVS-3200CP:
Power requirements: AC 100 to 240V ±10%, 50/60Hz ±10% Approx. 18 kg (39 lb 11 oz)
Power consumption: BVS-3200P: 140W
BVS-3200CP: 190W
Operating temperature: 0° to 40°C (32° to 104°F)
Storage temperature: –20° to 60°C (–4° to 140°F) *For further information, please contact the nearest Sony office.

BVS-3100P
Composite Video Switcher
•Ten Primary inputs (including colour black and colour background)
•One M/E and one KEY Bus •Two EXT KEY sources and FILL
available for KEYER •One EXT KEY source and FILL available for
DSK •Ten basic and eight matrix wipe patterns with modifiers •Fully
adjustable internal BOX MASK and EXT MASK inputs •Three
COLOUR MATTE GENERATOR for BACKGROUND, EFF/
BORDER, and DSK •CHROMAKEYER (RGB or Y/R-Y/B-Y
selectable) •DSK with BORDER, DROP SHADOW, OUTLINE (2H/
4H) selectable FADE to BLACK (FTB) function •Auto Transition for
M/E, DSK, and FTB •RS-422A interface •Communication of E-File
and initial panel information with BVE-910/9000/9100 •DME-450P
interface •Four Black Burst Outputs •GPI Input port for M/E, DSK,
FTB, and SELECT •Two PGM Outputs and one PVW Output

Supplied accessories: AC power cord

Control panel cable (5m)
Extension board
Operation and maintenance manual
Optional accessories: SWC-2530D Control panel cable (30m)
RMM-3000 Rack mount kit

Specifications
Power requirements: AC 100V to 240V ±10%, 50/60Hz ±10%
Power consumption: 125W
Operating temperature: 0° to 40°C (32° to 104°F)
Storage temperature: –20° to 60°C (–4° to 140°F)
Dimensions:
Control panel: Approx. 424 (W) × 111 (H) × 440 (D) mm
(163⁄4 × 43⁄8 × 173⁄8 inches)
Processor unit: Approx. 424 (W) × 132 (H) × 350 (D) mm
(163⁄4 × 51⁄4 × 153⁄4 inches)
Mass:
Control panel: Approx. 4.4 kg (9 lb 11 oz)
Processor unit: Approx. 13 kg (28 lb 11 oz)
*For further information, please contact the nearest Sony office.

–102–
3-3. Special effcts system
SEG-2550AP E
Colour special effects generator
*Production of this product has been discontinued. For details, please consult your nearest
Sony office.
•The SEG-2550AP is a compact and cost effective special effects
generator for program production and post production •The E-File
function, which memorizes and reproduces the setting of switches
and buttons and the movement of the controls, levers and sticks, is
adopted •Interface capability with the BVE-900/910 automatic
editing control unit and an external computer •A total of 137
versatile wipe patterns •Wipe pattern modifiers such as the
positioner, the border wipe, softness border edge, echo/pairing
wipe, and mosaic wipe are provided •8 video inputs and 4 bus lines
(A, B, PGM and PST) for special effects (MIX, WIPE, and
EXTERNAL KEY) •Built-in background colour •Built-in downstream
keyer (DSK) •Independent colour generation for DSK •Shadow and
edge adjustment for the key signal •Built-in sync generator •4 black
burst signal outputs for synchronization of video equipment •SC and

NON-LINEAR/
EDITOR/DME/
H phase indicators for easy phase adjustment •19-inch rack

SWITCHER
mountable •Torque adjustment of the effects levers

Supplied accessories: AC power cord DISK KEY EXT KEY

8 7 6 5
VIDEO IN
4 3 2 1
RS-232C GEN LOCK GPI

Wipe pattern list y

AC IN

CCJ connector for tally/intercom ON ON

ON ON ON ON ON ON ON ON 75 Ω ON 75 Ω
OFF OFF OFF OFF OFF OFF OFF OFF OFF
Designation label OFF OFF

D-sub (15-pin) connector VIDEO OUT OUT

DSP OUT PST OUT BLACK BURST OUT

Transparent Designation Chips TALLY/INTERCOM

5–8
TRIGGER

White Seal DSK

INSERT IN
EXT
WIPE IN
2
PGM OUT
1
TALLY/INTERCOM

3 2 1
4 3 2 1

Specifications
Power requirements: AC 220 to 240V, 50/60Hz
Power consumption: 92W
Operating temperature: 0 to 40°C (32 to 104°F)
Dimensions: Approx. 481 (W) × 155.5 (H) × 310.4 (D) mm
(19 × 61⁄8 × 121⁄4 inches)
Mass: Approx. 14.5 kg (31 lb 15 oz)
Video signal system: PAL
Switching system: Vertical blanking switcher Input signal: VIDEO IN 1 to 8 connectors (BNC type) × 8
Effects: MIX 0.7Vp-p (VB) or 1Vp-p (VBS), 75Ω, unbalanced
Mixing by PGM/PST MIX lever and the EFF lever with 75Ω termination switches
WIPE (The INDICATION selector does not function
137 wipe patterns (selectable) with the VB input signal.)
Wipe edge: The softness is continuously GENLOCK IN connector (BNC type) × 1
variable 0.3V/0.3V (BS) or 1Vp-p (VBS), with 75Ω
Border: Hue, chroma, luminance and width are termination switch
continuously variable DSK INSERT IN connector (BNC type) × 1
Pairing: Scanning lines 2 lines/3 lines/4 lines 1Vp-p (VS)
(selectable) EXT WIPE IN connector (DIN, 6-pin) × 1
Echo: Possible Output signal: VIDEO OUT 1 to 8 connector (BNC type) × 8
EXT KEY 1Vp-p (VBS), 75Ω, unbalanced (loop-through
Output signal (DIN, 6-pin) output of the corresponding VIDEO IN connector)
HD, VD, 4Vp-p, 75Ω, unbalanced PGM OUT 1 to 3 connector (BNC type) × 3
Input signal (BNC type and DIN, 6-pin) 1Vp-p (VBS), 75Ω, unbalanced
0.7Vp-p (video), 1Vp-p (VS), 75Ω, PST OUT 1 to 2 connector (BNC type) × 2
unbalanced with 75Ω termination switch 1Vp-p (VBS), 75Ω, unbalanced
EXT KEY connector (BNC type and DIN, 6-pin) GENLOCK OUT connector (BNC type) × 1
with 75Ω termination switch (loop-through output of GENLOCK IN connector)
Slicer circuit is included (Clip level is variable) DSP OUT connector (BNC type) × 1
DOWNSTREAM KEYER 1Vp-p (VS), 75Ω, unbalanced
Output signal (DIN, 6-pin) BLACK BURST OUT 1 to 4 connector
HD, VD, 4Vp-p, 75Ω, unbalanced (BNC type) × 4
Input signal (BNC type and DIN, 6-pin) 0.3V/0.3Vp-p (BS), 75Ω, unbalanced
0.7Vp-p (video), 1Vp-p (VS), 75Ω, Tally/Intercom: TALLY/INTERCOM 1 to 4 connector
unbalanced (DIN, 4-pin) × 4
DSK KEY connector: (BNC type and DIN, 6-pin) TALLY/INTERCOM 5 to 8 connector
with 75Ω termination switch (CCJ, 10-pin) × 1
Shadow: Wide and narrow (selectable) Maximum pick-up value in a relay: 24V 200mA
Edge: Variable DC
Colour matte: Continuously variable Trigger: TRIGGER (Special minijack) × 1
Chroma: Approx. 0 to 700mVp-p (variable TAKE function by earth
according to the hue level) (OPEN: +5V, impedance 65kΩ)
Hue: 0 to 360° GPI: GPI (D-sub, 15-pin) × 1
Luminance (Y): Approx. 50 to 700mV TAKE function, PGM DSK Cut-in/out by earth
continuously variable OPEN; ±5V, impedance 65kΩ)
BACKGROUND COLOUR RS-232C: 9600 baud (fixed), DTE (terminal),
Chroma: Approx. 0 to 700mVp-p Signal level ±9V
(variable according to the hue level) DG: Less than 1%
Hue: 0 to 360° DP: Less than 1°
Luminance (Y): Approx. 50 to 700mV Crosstalk: Over –50dB
continuously variable Frequency response: 8MHz ±0.5dB
S/N ratio: Over –60dB

–103–
 4. Chromakeyer
DCK-500P
Digital Chromakeyer
•8-bit Digital processiong for High Picture Quality •Auto-
Chromakey •Manual Key Control Including Colour Cancel
•Digital Coluor Correction •Multiple Format Inputs and
Outputs •Snapshot Control from Editing Controller •Two
Frame Synchronizers
Supplied accessories: AC power cable
Operation manual
Optional accessories: Control panel adopter BKDC-501

Specifications
General
Power requirement: AC 220/240V, 50/60Hz
Operating voltage: AC 180 to 264V, 48 to 63Hz
Power consumption: 65W
Dimensions: Processor 424 (W) × 132 (H) × 450 (D) mm
NON-LINEAR/
EDITOR/DME/
SWITCHER

(163/4 × 51/4 × 173/4 inches)

Control Panel 325 (W) × 52 (H) × 132 (D) mm
(127/8 × 21/8 × 51/4 inches)
Mass: Processor Apporx. 12 kg (26 lb 7 oz)
Control Panel Appox. 1.6 kg (3 lb 8 oz)
Operating temperature: 0 to 40°C (32 to 104°F)
Inputs
Video Inputs 1/2:
Input 1 Loop through
Input 2
Composite BNC type
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
Y/C (S-video) DIN 4-pin
Y: 1.0Vp-p, 75Ω
C: 0.3Vp-p, 75Ω, burst
Component (Betacam)
BNC type
Y: 1.0Vp-p, 75Ω
R-Y/B-Y: 0.525Vp-p, 75Ω, 100/0/75/0
Component RGB BNC type
RGB: 0.7Vp-p, 75Ω
Sync: 0.3 to 4.0Vp-p, 75Ω
GENLOCK IN BNC type, Loop-through
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
Outputs
PGM OUT 1/2
Composite BNC type
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
Y/C (S-video)* DIN 4-pin
Y: 1.0Vp-p, 75Ω
C: 0.3Vp-p, 75Ω, burst
Component 12-pin (for OUTPUT 1), BNC type (for OUTPUT 2)
Y: 1.0Vp-p, 75Ω
R-Y/B-Y: 0.525Vp-p, 75Ω, 100/0/100/0
KEY OUT 1/2: BNC tpye
1.0Vp-p, 75Ω, without sync
BLACK BURST OUT 1/2/3: BNC type
Sync: 0.3Vp-p, 75Ω, burst
Burst: 0.3Vp-p, 75Ω, burst
Interface
Editor: D-sub 9-pin, conforming to RS-422A
GPI: BNC type, TTL level
Control panel: D-sub 25-pin, conforming to RS-422A
DFS: D-sub 9-pin, comforting to RS-422A
Signal Processing
Sampling Frequency: Y: 908fH (fH: 15.625kHz)
R-Y/B-Y: 1/2 × 908fH
Quantization: Y/R-Y/B: 8 bits
Linearity (Composite output):
DP: Less than 2.5° - Composite input
Less than 1.0° - Y/C, Component input
DG: Less than 3.5% - Composite input
Less than 2.0% - Y/C, Component input
Crosstalk: Less than -50dB
Frequency response: 0 to 5MHz +0.5dB/-1dB
Signal to noise raito: More than 51dB - Composite
More than 55dB - Y/C, Component
Y/C delay: Less than 20ns - Component
Less than 50ns - Y/C, Composite
*OUTPUT 1 only

–104–
SECTION 4 VIDEO FILE SERVER SYSTEM
1. Multichannel video file server system
VSR-2000............................................................106

2. Multichannel video file server

system accessories................................................107

SERVER SYSTEM
VIDEO FILE

–105–
 1. Multichannel video file server system

VSR-2000
Multi Access Vide and Audio Server
•Incorporates MPEG-2 (Main Profile @ Main Level) encoder,
decoder, and storage device in a compact body •For
optimum encoding, the bit rate can be selected to be 4
Mb/s, 6 Mb/s, or 8 Mb/s •Clips encoded at different bit rates
can be stored in the same server •Back-to-back playout
without black •Five hard disk units incorporated •Auto Data
Rebuild by RAID Level 3 technology •Hot-swappable hard
disks •Trimming function allows playout from specified In
Points and Out Points •Shuttle function provides quick
Search and Pause •Equipped with an RS-232C or RS-422A
interface for control •Five slots for optional I/O boards allows
flexible configuration •Optional output boards provide analog
(composite, component, R/G/B) or SDI signals •The MPEG-
2 file data can be transferred via Ethernet (10Base-T or
100baseT). •DVB-ASI ready
Optional accessories: BKSR-2020 SDI MPEG Encoder Board
BKSR-2021 Analog MPEG Encoder Board
BKSR-2030 SDI MPEG Decoder Board
SERVER SYSTEM

BKSR-2031 Analog MPEG Decoder Board

BKSR-2070 100BaseT Board
VIDEO FILE

BKSH-209G 9GB HDD Unit

BKSH-218G 18 GB HDD Unit
BKSH-236G 36 GB HDD Unit
RMM-2000 Rack Mount Kit
BZSR-2000 Playout Control Software

Specifications
Input (Encoder) (1ch)
Video
Signal (BKSR-2021): Analog composite: BNC (x1)
Analog component: BNC (x3)
(BKSR-2020): SDI: BNC (x1), Roop through: BNC (x1)
Encode format: MPEG-2 MP@ML
Bit rate: 4.0/6.0/8.0 Mb/s
Image size: ITU REC 601
NTSC: 720 pixels x 480 lines
PAL: 720 pixels x 576 lines
Aspect ratio: 4:3

Audio
Signal (BKSR-2021): Analog (2ch): XLR 3-pin (x2) Male
(BKSR-2020): SDI (Embedded with video)
Encode format: MPEG-1, Audio layer II
Bit rate: 384 Mb/s
Sampling frequency: 48 kHz

Output (Decoder) (4ch, Max. 5ch)

Video
Signal (BKSR-2031): Analog composite (2ch): BNC (x2)
Analog component (1ch) or RGB (1ch): BNC (x3)
(BKSR-2030): SDI: BNC (x1)

Audio
Signal (BKSR-2031): Analog (2ch): XLR 3-pin (x2) Male
(BKSR-2030): Digital (2ch): SDI-embedded
Analog (2ch): XLR 3-pin (x2) Male

Hard Disk Drive Unit

Storage Capacity
BKSH-209G: 9 GB (x5): 45 GB
BKSH-218G: 18 GB (x5): 90 GB
BKSH-236G: 36 GB (x5): 180 GB

Control Signal
REMOTE: D-sub 9-pin RS-232C (Male)/
RS-422A (Female) switchable
VTR REMOTE: D-sub 9-pin RS-422A (Female)

General
Power requirement: AC100 V to 240 V, 50/60 Hz
Power consumption: 500 W
Dimension (w x h x d): 424 × 221 × 655 (mm),
16 3⁄4 × 8 3⁄4 × 25 7⁄8 (inches)

–106–
2. Multichannel video file server system accessories

BKSR-2020
SDI MPEG Encoder Board
*Allows input of SDI (1ch, BNC x 1)

BKSR-2021
Analog MPEG Encoder Board
•Allows input of analog composite (1ch, BNC x 1) and

SERVER SYSTEM
component (1ch, BNC x 3)

VIDEO FILE
BKSR-2030
SDI MPEG Decoder Board
•Decodes MPEG-2 data and converts it to SDI (BNC x 1,
and roop through)

BKSR-2031
Analog MPEG Decoder Board
•Decodes MPEG-2 data and converts it to analog composite
(2 ch, BNC x 2) and analog component or RGB signal(1 ch,
BNC x 3)

–107–
 2. Multichannel video file server system accessories

BKSR-2070
100BaseT Board
•Allows high-speed data transfer via Ethernet of 100Base-
TX

BKSH-209G
9GB HDD Unit
•A hard disk drive unit with a storage capacity of 9 GB,
SERVER SYSTEM

designed to be used in the VSR-2000.

VIDEO FILE

BKSH-218G
18 GB HDD Unit
•A hard disk drive unit with a storage capacity of 18 GB,
designed to be used in the VSR-2000.

BKSH-236G
36 GB HDD Unit
•A hard disk drive unit with a storage capacity of 36 GB,
designed to be used in the VSR-2000.

–108–
2. Multichannel video file server system accessories

BZSR-2000 (V1.0)
Playout Control Software
•Playout control software of the VSR-2000 •Incorporates all
the basic functions for Encoding, Clip Management, Playlist
Creation, and Olayout Monitoring of the VSR-2000

SERVER SYSTEM
VIDEO FILE
RMM-2000
Rack Mount Kit
•Rack mount kit for the VSR-2000 •Conforms to EIA
standard 19-inch rack size

–109–
 VIDEO FILE
SERVER SYSTEM

–110–
 SECTION 5 DISPLAY PRODUCTS
1. Monitors 2. Projectors
1-1. Colour video monitors 2-1. Multiscan projectors
PVM-20M4E/20M4A ................................................112 VPH-G90E/G90M.....................................................146
PVM-20M2E.............................................................113 VPH-G70QM/G70QMG............................................147
PVM-20N6E/20N6A .................................................114 VPH-G70VRM..........................................................148
PVM-20N5E/20N5A .................................................115 VPH-D50QM ............................................................149
PVM-20M7MDE .......................................................116 VPH-D50HTM ..........................................................150
PVM-20M2MDE/20M2MDA .....................................117 2-2. Projection wall units
PVM-14M4E/14M4A ................................................118 RVP-511DMS...........................................................151
PVM-14M2E/14M2A ................................................119 RVP-411DMS...........................................................152
PVM-14N6E/14N6A .................................................120 2-3. Video projectors
PVM-14N5E/14N5A .................................................121 VPH-V22M ...............................................................153
PVM-14M2MDE/14M2MDA .....................................122 VPH-V20M ...............................................................154
PVM-14N5MDE........................................................123 2-4. LCD projectors
PVM-9045QM ..........................................................124 VPL-FE100E/FE100M..............................................155
PVM-9043MD...........................................................125 VPL-FX200E/FX200M..............................................156
PVM-9042QM ..........................................................126 VPL-PX30 ................................................................157
PVM-9040ME...........................................................127 VPL-PX20 ................................................................158
PVM-6041QM ..........................................................128 VPL-S900E/S900M ..................................................159
PVM-2950QM ..........................................................129 VPL-PX1 ..................................................................160
PVM-20S1WE/20S1WA...........................................130 VPL-CS1 ..................................................................161
PGM-200R1E/200R1A.............................................131 VPL-VW10HT...........................................................162
PGM-200R2E...........................................................132 2-5. Data projector
PGM-100P1MD........................................................133 VPD-LE100 ..............................................................163
1-2. Flat panel monitors 2-6. Projector accessories ...............................................164
PFM-510A1WE ........................................................134 2-7. Projector lenses........................................................182
PFM-500A2WE ........................................................135

PRODUCTS
1-3. LCD monitor 3. Large screen display

DISPLAY
LMD-1041 ................................................................136 3-1. JJTRON
1-4. Monochrome video monitors ADN-8080 ................................................................187
PVM-146E................................................................137 3-2. JJTRON accessory...................................................188
PVM-145E................................................................137
PVM-96E..................................................................138 4. Others
PVM-95E..................................................................138 Digital scan converters
PVM-4B1E ...............................................................139 DSC-1024HD ...........................................................189
1-5. Monitor accessories..................................................140 DSC-1024G..............................................................190

–111–
 1-1 Colour video monitors

PVM-20M4E/20M4A*1 (PAL/NTSC/SECAM/NTSC 4.43 )

Colour Video Monitor
•HR Trinitron CRT assures a high resolution of 800 TV lines
•Adopts EBU standard phosphor •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/
102 (audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for adjustment/
operation •User preset function •Underscan, Blue Only and
H/V delay mode available •Auto chroma/phase setup*2
•Accepts external sync •Auto/Manual degaussing •Minimizes
magnetic field emission •Mountable into an EIA standard
rack with the optional SLR-103A
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
SLR-103A (Slide rail)
TU-1040E (Tuner unit)

Specifications
PRODUCTS
DISPLAY

CRT
AG pitch: 0.31 mm
Phosphor: EBU
CRT size: 53.3 cm (20-inch) diagonally
Visible picture size:
48.3 cm (19-inch) diagonally
Resolution: 800TV lines
Colour system: PAL, NTSC, SECAM, NTSC4.43*3
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB)
Synchronization: AFC time constant 1.0 mS
Normal scan: 7% over scan
Under scan: 5% under scan RGB / Component (selectable)*6
Linearity: H: less than 5% R/R-Y: 0.7 Vp-p ±6 dB
V: less than 5% G: 0.7 Vp-p ±6 dB
Convergence: Centre: 0.5 mm (typical) Sync on G: 0.3 Vp-p ±6 dB
Peripheral: 0.7 mm (typical) Y: 0.7 Vp-p ±6 dB
Raster size stability: H: 1.0% B/B-Y: 0.7 Vp-p ±6 dB
V: 1.5% Loop-through BNC automatic 75 Ω termination*5
HV regulation: 4.0%
Colour temperature: D65, D93, USER (3200K to 10000K) External Sync
Audio out: 0.8 W (distortion: less than 5 %) 4 Vp-p ±6 dB, negative
Power consumption: 130 W (with SDI: 140 W) Loop-through BNC automatic 75 Ω termination*5
AC input range: AC 100 to 240 V (50/60 Hz)
Operation temperature: 0 to 35 °C Regulation Compliance:
Storage temperature: -10 to 40 °C TÜV IEC-950, CE (EMC, LVD)
Operating humidity: 35 to 85% (no condensation) C-Tick (for PVM-20M4A)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 450 (W) × 458 (H) × 503 (D) mm
(173⁄4 × 181⁄8 × 197⁄8 inches)
Mass: 30.0 kg (66 lb 2 oz)

Inputs / Outputs
LINE A/B*4
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*5

LINE C*4
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*5

*1 PVM-20M4A is an Australian version.

*2 Phase setup is for NTSC signals only.
*3 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 The Y/C input has priority over the Composite video input.
*5 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*6 Video amplitude 100/0/100 colour bars.

–112–
1-1 Colour video monitors

PVM-20M2E (PAL/NTSC/SECAM/NTSC 4.43 )

Colour Video Monitor
•High resolution of 600 TV lines with dark tint CRT for high
contrast image reproduction •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/102
(audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for
adjustment/operation •User preset function •Underscan, Blue
Only and H/V delay mode available •Auto chroma/phase
setup*1 •Accepts external sync •Auto/Manual degaussing
•Mountable into an EIA standard rack with the optional
SLR-103A
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
SLR-103A (Slide rail)
TU-1040E (Tuner unit)

Specifications

PRODUCTS
DISPLAY
CRT
AG pitch: 0.4 mm
Phosphor: P-22
CRT size: 53.3 cm (20-inch) diagonally
Visible picture size:
48.0 cm (19-inch) diagonally
Resolution: 600TV lines
Colour system: PAL, NTSC, SECAM, NTSC4.43*2
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB)
Synchronization: AFC time constant 1.0 mS
Normal scan: 7% over scan
Under scan: 5% under scan RGB / Component (selectable)*5
Linearity: H: less than 5% R/R-Y: 0.7 Vp-p ±6 dB
V: less than 5% G: 0.7 Vp-p ±6 dB
Convergence: Centre: 0.6 mm (typical) Sync on G: 0.3 Vp-p ±6 dB
Peripheral: 1.0 mm (typical) Y: 0.7 Vp-p ±6 dB
Raster size stability: H: 1.0% B/B-Y: 0.7 Vp-p ±6 dB
V: 1.5% Loop-through BNC automatic 75 Ω termination*4
HV regulation: 4.0% External Sync
Colour temperature: D65, D93, USER (3200K to 10000K) 4 Vp-p ±6 dB, negative
Audio out: 0.8 W (distortion: less than 5 %) Loop-through BNC automatic 75 Ω termination*4
Power consumption: 120 W (with SDI: 130 W)
AC input range: AC 100 to 240 V (50/60 Hz) Regulation Compliance:
Operation temperature: 0 to 35 °C TÜV IEC-950, CE (EMC, LVD)
Storage temperature: -10 to 40 °C
Operating humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 450 (W) × 458 (H) × 503 (D) mm
(173⁄4 × 181⁄8 × 197⁄8 inches)
Mass: 30.0 kg (66 lb 2 oz)

Inputs / Outputs
LINE A/B*3
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*4

LINE C*3
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*4

*1 Phase setup is for NTSC signals only.

*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*5 Video amplitude 100/0/100 colour bars.

–113–
 1-1 Colour video monitors

PVM-20N6E/20N6A*1(PAL/NTSC/SECAM/NTSC 4.43)

Colour Video Monitor

•Resolution of 500 TV lines •Beam current feedback circuit
for stability in the colour balance •Accepts composite video,
Y/C and RGB signals •Switchable aspect ratio (4:3 and 16:9)
•On-screen menu for adjustment/operation •Input channel
can be selected via REMOTE terminal (Phono) •Built-in
speaker •One touch recall of last menu used (VOLUME,
CONTRAST, BRIGHTNESS, CHROMA and PHASE)
•Mountable into a 19-inch EIA standard rack with the optional
SLR-103A
Optional accessories: Slide rail kit SLR-103A

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*2
Picture tube: 53 cm (20-inch), visible picture size 48.0 cm (min.)
(19-inch) measured diagonally, 90° deflection
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 105 W
Dimensions: 449 (W) × 441 (H) × 502 (D) mm
(1711⁄16 × 173⁄8 × 193⁄4 inches)
Mass: 28 kg (61 lb 11 oz)
VIDEO
LINE A*3 Loop-through BNC
PRODUCTS

1.0 Vp-p, sync negative,

DISPLAY

Automatic 75 Ω termination*4
Loop-through Mini DIN 4-pin
Y (luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*4
C (chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*4
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*4

LINE B*3 BNC

1.0 Vp-p, sync negative, 75 Ω
Mini DIN 4-pin
Y: 1.0 Vp-p, sync negative, 75 Ω
C: PAL: 0.3 Vp-p, sync negative, 75 Ω
NTSC: 0.286 Vp-p, 75 Ω
RGB/Sync BNC
R/G/B: 0.7 Vp-p, 75 Ω
Sync on G: 0.3 Vp-p, 75 Ω
Sync: 4.0 Vp-p, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Phono
-5 dBu, high impedance
RGB/Sync Phono
-5 dBu, high impedance

*1 PVM-20N6A is an Australian version.

*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–114–
1-1 Colour video monitors

PVM-20N5E/20N5A*1 (PAL/NTSC/SECAM/NTSC 4.43)

Colour Video Monitor

•Resolution of 500 TV lines •Beam current feedback circuit
for stability in the colour balance •Accepts composite video
and Y/C signals •On-screen menu for adjustment/operation
•Built-in speaker •One touch recall of last menu used
(VOLUME, CONTRAST, BRIGHTNESS, CHROMA and
PHASE) •Mountable into a 19-inch EIA standard rack with
the optional SLR-103A
Optional accessories: Slide rail kit SLR-103A

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*2
Picture tube: 53 cm (20-inch), visible picture size 48.0 cm (min.)
(19-inch) measured diagonally, 90° deflection
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 105 W
Dimensions: 449 (W) × 441 (H) × 502 (D) mm
(1711⁄16 × 173⁄8 × 193⁄4 inches)
Mass: 28 kg (61 lb 11 oz)
VIDEO
LINE A*3 Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*4
Loop-through Mini DIN 4-pin

PRODUCTS
DISPLAY
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*4
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*4
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*4

LINE B*3 BNC

1.0 Vp-p, sync negative, 75 Ω
Mini DIN 4-pin
Y: 1.0 Vp-p, sync negative, 75 Ω
C: PAL: 0.3 Vp-p, sync negative, 75 Ω
NTSC: 0.286 Vp-p, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Phono
-5 dBu, high impedance

*1 PVM-20N5A is an Australian version.

*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–115–
 1-1 Colour video monitors

PVM-20M7MDE (PAL)
Colour Video Monitor for medical use
•HR Trinitron CRT assures a high resolution of 550 TV
lines*1 at 15kHz/800 TV lines at progressive scan •Adopts
EBU phosphors •100Hz double scan •Digital PAL comb filter
for accurate image reproduction •Field doubling scanning to
reduce flicker phenomena •Component (Y/R-Y/B-Y or RGB)
input facility •On-screen display in multiple language for
adjustment/operation •6500K/5600K/User preset colour
temperature selectable •Accepts external sync •RS-232C
serial remote control capability •Remote/tally input •Power
saving function is available •Mountable into a 19-inch EIA
standard rack with optional SLR-103A •White colour cabinet
with side and control panel covers •Complies with IEC-601-1
safety regulation
Supplied accessories: Side covers
Control panel cover
RS-232C interface manual
Quick reference card
AC power cord
Panel hinges
Instructions for use
Optional accessories: Slide rail kit SLR-103A

Specifications
Video signal system: CCIR 625 lines, 50 fields, interlaced
CCIR 625 lines, 50 fields, non-interlaced
Colour system: PAL
PRODUCTS
DISPLAY

Picture tube: 53.3 cm (20-inch), HR Trinitron tube, visible picture

size 48.3 cm (min.) (19-inch) measured diagonally,
90° deflection, EBU phosphors
Horizontal resolution: PAL (15kHz): 550 TV lines*1
Progressive scan: 800 TV lines
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: Approx. 160 W
Dimensions: 450 (W) × 457.5 (H) × 503 (D) mm
(173⁄4 × 181⁄8 × 197⁄8 inches)
Mass: 34 kg (74 Ib 15 oz)

VIDEO
LINE A Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
LINE B Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
C(chrominance):
0.3 Vp-p, Automatic 75 Ω termination*2
RGB/Component A: Loop-through BNC
R-Y/B-Y: 0.7 Vp-p, Automatic 75 Ω termination*2
Y: 1.0 Vp-p, Automatic 75 Ω termination*2
R/G/B: 0.7 Vp-p, Automatic 75 Ω termination*2
Sync on G: 0.3 Vp-p, negative, Automatic 75 Ω
termination*2
Sync: 4.0 Vp-p negative, Automatic 75 Ω
termination*2
B:BNC
R-Y/B-Y: 0.7 Vp-p, 75 Ω
Y: 1.0 Vp-p, 75 Ω
R/G/B: 0.7 Vp-p, 75 Ω
Sync on G: 0.3 Vp-p, negative, 75 Ω
Sync: 4.0 Vp-p negative, 75 Ω

AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component A: Loop-through Phono
-5 dBu, high impedance
B: Phono
-5 dBu, high impedance

*1 Maximum resolution of the field doubling digital device circuit.

*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–116–
1-1 Colour video monitors

PVM-20M2MDE/20M2MDA*1(PAL/NTSC)
Colour Video Monitor for medical use
•High resolution of 600 TV lines at centre •Beam current
feedback circuit for stable colour reproduction •Component
(Y/R-Y/B-Y or RGB) input facility •On screen display in
multiple language for adjustment/operation •D65/D56/D93/
User preset colour temperature selectable •Capable of
observing two RGB input signals simultaneously with the
RGB split mode •20% overscan/normal scan/underscan
selection •Blue only mode •Accepts external sync •RS-232C
serial remote control capability •8 V DC out •Tally lamp
•Mountable into a 19-inch EIA standard rack with optional
SLR-103A •White colour cabinet •Complies with EN-60601-1
safety regulation
Supplied accessories: AC power cord (1)
AC plug holder (1)
Side covers (2)
Control panel cover (1)
Panel hinges (2)
Remote control connector 8-pin mini DIN (1)
Instructions for Use (1)
RS-232C protocol manual
Optional accessories: Slide rail kit SLR-103A

Specifications
Colour system: PAL/NTSC (automatically selected)
Picture tube: 20-inch CRT with P-22 phosphor, visible picture size
479.8 mm (19-inch measured diagonally)

PRODUCTS
Horizontal resolution: 600TV lines at centre (Video inputs)

DISPLAY
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 1.5 to 0.6 A, 50/60 Hz
Dimensions: 450 (W) × 457.5 (H) × 503 (D) mm
(173⁄4 × 181⁄8 × 197⁄8 inches)
Mass: 30.0 kg (66 Ib 2 oz)
VIDEO
LINE A Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
LINE B Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*2
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*2
RGB/Component A: Loop-through BNC
R-Y/B-Y:
0.7 Vp-p, Automatic 75 Ω termination*2
Y/Sync on G:
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
R/G/B:
0.7 Vp-p, Automatic 75 Ω termination*2
Sync:
4.0 Vp-p negative, Automatic 75 Ω termination*2
B:BNC
R-Y/B-Y:
0.7 Vp-p, 75 Ω
Y/Sync on G:
1.0 Vp-p, sync negative, 75 Ω
R/G/B:
0.7 Vp-p, 75 Ω
Sync:
4.0 Vp-p negative, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component A: Loop-through Phono
-5 dBu, high impedance
B: Phono
-5 dBu, high impedance

*1: PVM-20M2MDA is an Australian version.

*2: 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–117–
 1-1 Colour video monitors

PVM-14M4E/14M4A*1 (PAL/NTSC/SECAM/NTSC 4.43 )

Colour Video Monitor
•HR Trinitron CRT assures a high resolution of 800 TV lines
•Adopts EBU standard phosphor •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/102
(audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for adjustment/
operation •User preset function •Underscan, Blue Only and
H/V delay mode available •Auto chroma/phase setup*2
•Accepts external sync •Auto/Manual degaussing •Minimizes
magnetic field emission •Mountable into an EIA standard
rack with the optional MB-502B and SLR-102
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
MB-502B (Rack mounting bracket)
SLR-102 (Slide rail)
TU-1040E (Tuner unit)
PRODUCTS

Specifications
DISPLAY

CRT
AG pitch: 0.25 mm
Phosphor: EBU
CRT size: 37.1 cm (14-inch) diagonally
Visible picture size: 33.2 cm (13-inch) diagonally
Resolution: 800 TV lines
Colour system: PAL, NTSC, SECAM, NTSC4.43*3
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB) RGB / Component (selectable)*6
Synchronization: AFC time constant 1.0 mS R/R-Y: 0.7 Vp-p ±6 dB
Normal scan: 7% over scan G: 0.7 Vp-p ±6 dB
Under scan: 5% under scan Sync on G: 0.3 Vp-p ±6 dB
Linearity: H: less than 4% Y: 0.7 Vp-p ±6 dB
V: less than 4% B/B-Y: 0.7 Vp-p ±6 dB
Convergence: Centre: 0.4 mm (typical) Loop-through BNC automatic 75 Ω termination*5
Peripheral: 0.5 mm (typical)
Raster size stability: H: 1.0% External Sync
V: 1.5% 4.0 Vp-p ±6 dB, negative
HV regulation: 3.5% Loop-through BNC automatic 75 Ω termination*5
Colour temperature: D65, D93, USER (3200K to 10000K)
Audio out: 0.8 W (distortion: less than 5%) Regulation Compliance:
Power consumption: 90 W (with SDI: 99 W) TÜV IEC-950, CE (EMC, LVD)
AC input range: AC 100 to 240 V (50/60 Hz) C-Tick (for PVM-14M4A)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operating humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 346 (W) × 340 (H) × 431 (D) mm
(135⁄8 × 131⁄2 × 17 inches)
Mass: 16.7 kg (36 lb 13 oz)

Inputs / Outputs
LINE A/B*4
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*5

LINE C*4
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*5

*1 PVM-14M4A is an Australian version.

*2 Phase setup is for NTSC signals only.
*3 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 The Y/C input has priority over the Composite video input.
*5 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*6 Video amplitude 100/0/100 colour bars.

–118–
1-1 Colour video monitors

PVM-14M2E/14M2A*1 (PAL/NTSC/SECAM/NTSC 4.43 )

Colour Video Monitor
•High resolution of 600 TV lines with dark tint CRT for high
contrast image reproduction •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/102
(audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for adjustment/
operation •User preset function •Underscan, Blue Only and
H/V delay mode available •Auto chroma/phase setup*2
•Accepts external sync •Auto/Manual degaussing •Mountable
into an EIA standard rack with the optional MB-502B and
SLR-102
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
MB-502B (Rack mounting bracket)
SLR-102 (Slide rail)
TU-1040E (Tuner unit)

PRODUCTS
Specifications

DISPLAY
CRT
AG pitch: 0.25 mm
Phosphor: P-22
CRT size: 37.1 cm (14-inch) diagonally
Visible picture size: 33.2 cm (13-inch) diagonally
Resolution: 600 TV lines
Colour system: PAL, NTSC, SECAM, NTSC4.43*3
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB) RGB / Component (selectable)*6
Synchronization: AFC time constant 1.0 mS R/R-Y: 0.7 Vp-p ±6 dB
Normal scan: 7% over scan G: 0.7 Vp-p ±6 dB
Under scan: 5% under scan Sync on G: 0.3 Vp-p ±6 dB
Linearity: H: less than 4% Y: 0.7 Vp-p ±6 dB
V: less than 4% B/B-Y: 0.7 Vp-p ±6 dB
Convergence: Centre: 0.4 mm (typical) Loop-through BNC automatic 75 Ω termination*5
Peripheral: 0.5 mm (typical)
Raster size stability: H: 1.0% External Sync
V: 1.5% 4.0 Vp-p ±6 dB, negative
HV regulation: 3.5% Loop-through BNC automatic 75 Ω termination*5
Colour temperature: D65, D93, USER (3200K to 10000K)
Audio out: 0.8 W (distortion: less than 5%) Regulation Compliance:
Power consumption: 90 W (with SDI: 99 W) TÜV IEC-950, CE (EMC, LVD)
AC input range: AC 100 to 240 V (50/60 Hz) C-Tick (for PVM-14M2A)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operating humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 346 (W) × 340 (H) × 431 (D) mm
(135⁄8 × 131⁄2 × 17 inches)
Mass: 16.7 kg (36 lb 13 oz)

Inputs / Outputs
LINE A/B*4
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*5

LINE C*4
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*5

*1 PVM-14M2A is an Australian version.

*2 Phase setup is for NTSC signals only.
*3 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 The Y/C input has priority over the Composite video input.
*5 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*6 Video amplitude 100/0/100 colour bars.

–119–
 1-1 Colour video monitors

PVM-14N6E/14N6A*1(PAL/NTSC/SECAM/NTSC 4.43)

Colour Video Monitor

•Resolution of 500 TV lines •Beam current feedback circuit
for stability in the colour balance •Accepts composite video,
Y/C and RGB signals •Switchable aspect ratio (4:3 and 16:9)
•On-screen menu for adjustment/operation •Input channel
can be selected via REMOTE terminal (Phono) •Built-in
speaker •One touch recall of last menu used (VOLUME,
CONTRAST, BRIGHTNESS, CHROMA and PHASE)
•Mountable into a 19-inch EIA standard rack with the optional
MB-502 and SLR-102
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*2
Picture tube: 37.1 cm (14-inch), visible picture size 33.2 cm (min.)
(13-inch) measured diagonally, 90° deflection
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(135⁄8 × 133⁄8 × 165⁄16 inches)
Mass: 15 kg (33 lb 1 oz)
PRODUCTS

VIDEO
DISPLAY

LINE A*3 Loop-through BNC

1.0 Vp-p, sync negative,
Automatic 75 Ω termination*4
Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*4
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*4
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*4

LINE B*3 BNC

1.0 Vp-p, sync negative, 75 Ω
Mini DIN 4-pin
Y: 1.0 Vp-p, sync negative, 75 Ω
C: PAL: 0.3 Vp-p, sync negative, 75 Ω
NTSC: 0.286 Vp-p, 75 Ω
RGB/Sync BNC
R/G/B: 0.7 Vp-p, 75 Ω
Sync on G: 0.3 Vp-p, 75 Ω
Sync: 4.0 Vp-p, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Phono
-5 dBu, high impedance
RGB/Sync Phono
-5 dBu, high impedance

*1 PVM-14N6A is an Australian version.

*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Compsite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–120–
1-1 Colour video monitors

PVM-14N5E/14N5A*1(PAL/NTSC/SECAM/NTSC 4.43)

Colour Video Monitor

•Resolution of 500 TV lines •Beam current feedback circuit
for stability in the colour balance •Accepts composite video
and Y/C signals •On-screen menu for adjustment/operation
•Built-in speaker •One touch recall of last menu used
(VOLUME, CONTRAST, BRIGHTNESS, CHROMA and
PHASE) •Mountable into a 19-inch EIA standard rack with
the optional MB-502 and SLR-102
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
Picture tube: 37.1 cm (14-inch), visible picture size 33.2 cm (min.)
(13-inch) measured diagonally, 90° deflection
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(135⁄8 × 133⁄8 × 165⁄16 inches)
Mass: 15 kg (33 lb 1 oz)
VIDEO
LINE A*3 Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*4

PRODUCTS
DISPLAY
Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*4
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*4
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*4
LINE B*3 BNC
1.0 Vp-p, sync negative, 75 Ω
Mini DIN 4-pin
Y: 1.0 Vp-p, sync negative, 75 Ω
C: PAL: 0.3 Vp-p, sync negative, 75 Ω
NTSC: 0.286 Vp-p, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Phono
-5 dBu, high impedance

*1 PVM-14N5A is an Australian version.

*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–121–
 1-1 Colour video monitors

PVM-14M2MDE/14M2MDA*1 (NTSC/PAL/SECAM/NTSC 4.43 )

Colour Video Monitor for medical use
•High resolution of 600 TV lines at centre •Beam current
feedback circuit for stable colour reproduction •Component
(Y/R-Y/B-Y or RGB) input facility •On-screen display in
multiple language for adjustment/operation •D65/D56/D93/
User preset colour temperature selectable •Capable of
observing two RGB input signals simultaneously with the
RGB split mode •20% overscan/normal scan/underscan
selection •Blue only mode •Accepts external sync •RS-232C
serial remote control capability •8 V DC out •Tally lamp
•Mountable into a 19-inch EIA standard rack with optional
MB-502B and SLR-102 •White colour cabinet •Complies with
EN 60 601-1 safety regulation
Supplied accessories: AC power cord (1)
AC plug holder (1)
Side covers (2)
Control panel cover (1)
Panel hinges (2)
Remote control connector 8-pin mini DIN (1)
Instructions for Use (1)
RS-232C protocol manual (1)
Optional accessories: Mounting bracket MB-502B
Slide rail kits SLR-102

Specifications
Colour system: PAL/NTSC (automatically selected)
Picture tube: 14-inch CRT with P-22 phosphor, visible picture size
PRODUCTS

331.6 mm (13-inch measured diagonally)

DISPLAY

Horizontal resolution: 600 TV lines at centre (Video inputs)

Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V 1.2 to 0.5 A, 50/60 Hz
Dimensions: 346 (W) × 340 (H) × 430.5 (D) mm
(135⁄8 × 131⁄2 × 17 inches)
Mass: 16.7 kg (37 Ib 8 oz)
VIDEO
LINE A Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
LINE B Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative, Automatic
75 Ω termination*2
C(chrominance): PAL: 0.3 Vp-p, Automatic 75 Ω
termination*2
NTSC: 0.286 Vp-p, Automatic 75 Ω
termination*2
RGB/Component A: Loop-through BNC
R-Y/B-Y:
0.7 Vp-p, Automatic 75 Ω termination*2
Y/Sync on G:
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*2
R/G/B:
0.7 Vp-p, Automatic 75 Ω termination*2
Sync:
4.0 Vp-p negative, Automatic 75 Ω termination*2
B: BNC
R-Y/B-Y:
0.7 Vp-p, 75 Ω
Y/Sync on G:
1.0 Vp-p, sync negative, 75 Ω
R/G/B:
0.7 Vp-p, 75 Ω
Sync:
4.0 Vp-p negative, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component A: Loop-through Phono
-5 dBu, high impedance
B: Phono
-5 dBu, high impedance

*1 PVM-14M2MDA is an Australian version.

*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–122–
1-1 Colour video monitors

PVM-14N5MDE (PAL/NTSC/SECAM/NTSC 4.43 )

Colour Video Monitor for medical use
•High resolution of 500 TV lines with Sony Trinitron® CRT
•Stable colour reproduction with Beam Current Feedback
Circuit •Loop-through Y/C and composite video inputs
•Complies with world-wide EN 60 601-1, UL 2601-1 and CSA
601.1 safety regulations •Ground earth terminal for safety
•Supplied with side covers •Accepts PAL, NTSC, SECAM
and NTSC4.43 signals •On-screen menu with a choice of five
languages to facilitate monitor adjustment/setting •Built-in
speaker for audio monitoring
Supplied accessories: AC power cord (1)
Side covers (2)
Instructions for use (1)
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102

Specifications
General
System: PAL/NTSC/SECAM/NTSC4.43 automatically selected
Power requirements: 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(135⁄8 × 133⁄8 × 165⁄16 inches)
Mass: 15 kg (33 lb 1 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Storage temperature: -10 to 40 °C (14 to 104 °F)
Operating humidity: 30 to 85% (no condensation)

CRT Performance

PRODUCTS
CRT type: 370 mm (14-inch) Trinitron CRT with P-22 phosphors,

DISPLAY
visible picture size 332 mm (13-inch) (min.) measured
diagonally
Resolution: 500 TV lines
Colour temperature: D65

Picture performance
Normal scan: 7% overscan
Linearity: H: less than 8%
V: less than 7%

Input performance
Video
LINE A*1 Composite: Loop-through BNC 1.0 Vp-p +3 dB -6 dB,
sync negative automatic 75 Ω
termination*2
Y/C*1: Loop-through 4-pin mini DIN
Y: 1.0 V p-p +3 dB -6 dB, sync negative
automatic 75 Ω termination*2
C: 0.3 Vp-p (PAL) or 0.286 Vp-p (NTSC),
automatic 75 Ω termination*2
LINE B*1 Composite: BNC 1.0 Vp-p +3 dB -6 dB, sync
negative, 75 Ω
Y/C*1: 4-pin mini DIN
Y: 1.0 Vp-p +3 dB -6 dB,
sync negative, 75 Ω
C: 0.3 Vp-p (PAL) or
0.286 Vp-p (NTSC), 75 Ω
Frequency response: 6 MHz (±3 dB)
Audio
LINE A Loop-through phono -5 dBu, high impedance
LINE B Phono -5 dBu, high impedance

0 dBu=0.775 V rms

*1 Y/C input has priority over composite input.

*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–123–
 1-1 Colour video monitors

PVM-9045QM (PAL/NTSC/SECAM/NTSC 4.43)

For picture evaluation in studio, ENG/EFP

applications
•Aspect ratio is switchable (4:3 and 16:9) with the 16:9 button
on the front panel •High resolution CRT provides 450 TV
lines at centre (composite video) •Stable colour temperature
from beam current feedback circuit •Analogue component
level selectable between BETA and N10/SMPTE by a rear
panel slide switch •NTSC comb filter •Accepts external
sync/sync on Green •Tally input •Colour temperature D65
•Blue only, H/V delay, Underscan capability •Built-in speaker
and monitoring amplifier •AC/DC operation •Front panel
degauss button •EIA standard rack mountable with a second
PVM-9045QM (or an optional blank panel MB-509) by using
an optional MB-507 rack mounting bracket
Supplied accessories: AC power cord, Mini DIN 8-pin connector with cable
(cable length 350 mm, 137⁄8 inches),
Tally number plates (12 pcs: No.1 to 5, A, B, C, P, R,
white × 2 pcs), Operation manual
Optional accessories: TV tuner unit TU-1040E
Monitor ENG kit VF-505 (Monitor hood and cord reel)
Rack mounting bracket MB-507
Blank panel MB-509
Battery adaptor DC-L10
Rechargeable lithium-ion battery BP-L60A
Rechargeable lithium-ion battery BP-L90A
Rechargeable battery pack NP-1B
Rechargeable battery pack BP-90A
Battery case (for BP-90A battery) DC-210
PRODUCTS

Battery charger (for two BP-L60A or BP-L90A

DISPLAY

batteries) BC-L50
Battery charger (for four BP-L60A or BP-L90A
batteries) BC-L100CE
Battery charger (for four NP-1B batteries)
BC-1WDCE
Battery charger (for four NP-1B and four BP-90A
batteries) BC-410CE

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
(automatically selected)
Picture tube: 22 cm (9-inch) HR Trinitron tube,
visible picture size 19.7 cm (8-inch) measured
diagonally, 70° deflection
Horizontal resolution: 450 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
DC: 12 V 3.7 A
Power consumption: AC: 43 W
DC: 40 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(85⁄8 × 85⁄8 × 14 inches)
Mass: 8.2 kg (18 lb) External sync Loop-through BNC
VIDEO 4.0 Vp-p negative, Automatic 75 Ω termination*3
LINE A Tally Mini DIN 8-pin
Composite*2: Loop-through BNC DC XLR 4-pin
1.0 Vp-p, sync negative, Automatic 75 Ω termination*3 AUDIO
Y/C*2: Loop-through Mini DIN 4-pin LINE A Loop-through Phono
Y (luminance): 1.0 Vp-p, sync negative, -5 dBu, high impedance
Automatic 75 Ω termination*3 LINE B Loop-through Phono
C (chrominance): -5 dBu, high impedance
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3 RGB/Component Phono
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*3 -5 dBu, high impedance
LINE B
Composite: Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω termination*3
RGB/Component*4 BNC
R/R-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync on Green/G/Y: Composite: 1.0 Vp-p, sync negative, 75 Ω
Non-composite: 0.7 Vp-p, 75 Ω
B/B-Y: Non-composite: 0.7 Vp-p, 75 Ω

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*4 Video amplitude 100/0/100 colour bars.

–124–
1-1 Colour video monitors

PVM-9043MD*1 (PAL/NTSC/NTSC 4.43)

Colour Video Monitor for medical use

•High resolution of 450 TV lines at centre •Beam current
feedback circuit for stable colour reproduction •Colour
temperature 6500K •19-inch EIA standard rack mountable
with a second PVM-9043MD or the optional blank panel
MB-509 by using an optional MB-507 rack mounting
bracket •White colour cabinet •Complies with IEC-601-1
safety regulation
Supplied accessories: Side covers
Front panel cover
Operation manual
Optional accessories: Rack mounting bracket MB-507
Blank panel MB-509

Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/NTSC4.43*2 (automatically selected)
Picture tube: 22 cm (9-inch) HR Trinitron tube, visible picture
size 19.7cm (8-inch) measured diagonally,
70° deflection
Horizontal resolution: 450 TV lines
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
Power consumption: 45 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(85⁄8 × 85⁄8 × 14 inches)

PRODUCTS
DISPLAY
Mass: 7.8 kg (17 lb 3 oz)
VIDEO
LINE A Composite*3: Loop-through BNC,
1.0 Vp-p, sync negative, Automatic
75 Ω termination*4
Y/C*3: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative,
Automatic 75 Ω termination*4
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω
termination*4
NTSC: 0.286 Vp-p, Automatic 75 Ω
termination*4
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance

*1 Not available in some areas. For details, please contact your nearest Sony office.
*2 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–125–
 1-1 Colour video monitors

PVM-9042QM (PAL/NTSC/SECAM/NTSC 4.43)

For multi-purpose use in various applications

•Aspect ratio is switchable (4:3 and 16:9) with the 16:9 button
on the front panel •Stable colour temperature from beam
current feedback circuit •Analogue component level
selectable between BETA and N10/SMPTE by a rear panel
slide switch •NTSC comb filter •Accepts external sync/sync
on Green •Tally input •Colour temperature D65 •Blue only,
H/V delay, Underscan capability •Built-in speaker and
monitoring amplifier •AC/DC operation •Front panel degauss
button •EIA standard rack mountable with a second
PVM-9042QM (or an optional blank panel MB-509) by using
an optional MB-507 rack mounting bracket
Supplied accessories: AC power cord, Mini DIN 8-pin connector with cable
(cable length 350 mm, 137⁄8 inches),
Tally number plates (12 pcs: No.1 to 5, A, B, C, P, R,
white × 2 pcs), Operation manual
Optional accessories: TV tuner unit TU-1040E
Monitor ENG kit VF-505 (Monitor hood and cord reel)
Rack mounting bracket MB-507
Blank panel MB-509
Battery adaptor DC-L10
Rechargeable lithium-ion battery BP-L60A
Rechargeable lithium-ion battery BP-L90A
Rechargeable battery pack NP-1B
Rechargeable battery pack BP-90A
Battery case (for BP-90A battery) DC-210
Battery charger (for two BP-L60A or BP-L90A
batteries) BC-L50
Battery charger (for four BP-L60A or BP-L90A
PRODUCTS
DISPLAY

batteries) BC-L100CE
Battery charger (for four NP-1B batteries)
BC-1WDCE
Battery charger (for four NP-1B and four BP-90A
batteries) BC-410CE

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
(automatically selected)
Picture tube: 22 cm (9-inch) Trinitron tube, visible picture
size 19.7 cm (8-inch) measured diagonally,
70° deflection
Horizontal resolution: 250 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
DC: 12 V 3.7 A
Power consumption: AC: 43 W
DC: 40 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(85⁄8 × 85⁄8 × 14 inches)
Mass: 8.2 kg (18 lb) External sync Loop-through BNC
4.0 Vp-p negative, Automatic 75 Ω termination*3
VIDEO Tally Mini DIN 8-pin
LINE A DC INPUT XLR 4-pin
Composite*2: Loop-through BNC
1.0 Vp-p, sync negative, AUDIO
Automatic 75 Ω termination*3 LINE A Loop-through Phono
Y/C*2: Loop-through Mini DIN 4-pin -5 dBu, high impedance
Y(luminance): 1.0 Vp-p, sync negative, LINE B Loop-through Phono
Automatic 75 Ω termination*3 -5 dBu, high impedance
C(chrominance): RGB/Component Phono
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3 -5 dBu, high impedance
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*3
LINE B
Composite: Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*3
RGB/Component*4 BNC
R/R-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync on Green/G/Y: Composite: 1.0 Vp-p, sync negative, 75 Ω
Non-composite: 0.7 Vp-p, 75 Ω
B/B-Y: Non-composite: 0.7 Vp-p, 75 Ω

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*4 Video amplitude 100/0/100 colour bars.

–126–
1-1 Colour video monitors

PVM-9040ME (PAL/SECAM)
Basic monitoring device
•Employs a beam current feedback circuit for stability in the
colour balance •Composite video or Y/C input with audio
input •Built-in speaker •19-inch EIA standard rack
mountable with a second PVM-9040ME or the optional blank
panel MB-509 by using the optional MB-507 rack mounting
bracket
Supplied accessories: AC power cord, Operation manual
Optional accessories: TV tuner unit TU-1040E
Rack mounting bracket MB-507
Blank panel MB-509
Composite digital monitor interface DMIF-2000

Specifications
Video signal system: CCIR 625 lines, 50 fields
Colour system: PAL/SECAM (automatically selected)
Picture tube: 22 cm (9-inch) Trinitron tube, visible picture
size 19.7 cm (8-inch) measured diagonally,
70° deflection
Horizontal resolution: 250 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
Power consumption: 39 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(85⁄8 × 85⁄8 × 14 inches)
Mass: 7.5 kg (16 lb 9.5 oz)

VIDEO
LINE

PRODUCTS
Composite*1: Loop-through BNC

DISPLAY
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*2
Y/C*1: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative,
Automatic 75 Ω termination*2
C(chrominance):
0.3 Vp-p, Automatic 75 Ω termination*2

AUDIO
LINE Loop-through Phono
-5 dBu, high impedance

*1 The Y/C input has priority over the Composite video input.
*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–127–
 1-1 Colour video monitors

PVM-6041QM (PAL/NTSC/SECAM/NTSC 4.43)

Suitable for picture confirmation in ENG/EFP

application and multiple camera monitoring
•Employs a beam current feedback circuit for stability in the
colour balance •Two inputs: Component (Y/R-Y/B-Y or RGB)
and Composite video •Accepts external sync and sync on
Green •Blue only, H/V delay, Underscan capability •AC/DC
operation capability using one NP-1B battery pack or a
BP-90A with DC-210 adaptor •Wired remote control
capability •Built-in speaker •Tally input •19-inch EIA standard
rack mountable with another two units of PVM-6041QM or
two optional blank panel MB-508 by using the optional
MB-507 rack mounting bracket

Supplied accessories: AC power cord, Mini DIN 8-pin connector with cable
(cable length 350 mm, 137⁄8 inches),
Operation manual
Optional accessories: TV tuner unit TU-1040E
Monitor ENG kit VF-504 (Monitor hood and cord reel)
Rack mounting bracket MB-507
Blank panel MB-508
Battery adaptor DC-L10
Rechargeable lithium-ion battery BP-L60A
Rechargeable lithium-ion battery BP-L90A
Rechargeable battery pack NP-1B
Rechargeable battery pack BP-90A
Battery case (for BP-90A battery) DC-210
Battery charger (for two BP-L60A or BP-L90A
batteries) BC-L50
Battery charger (for four BP-L60A or BP-L90A
PRODUCTS

batteries) BC-L100CE
DISPLAY

Battery charger (for four NP-1B batteries)

BC-1WDCE
Battery charger (for four NP-1B and four BP-90A
batteries) BC-410CE

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
(automatically selected)
Picture tube: 14.7 cm (6-inch) Trinitron tube, visible picture
size 13 cm (5-inch) measured diagonally,
70° deflection
Horizontal resolution: 250 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
DC: 12 V 3.2 A
Power consumption: AC: 40 W
DC: 40 W
Dimensions: 146 (W) × 173 (H) × 352.5 (D) mm
(53⁄4 × 67⁄8 × 14 inches)
Mass: 5.5 kg (12 lb 2 oz)
VIDEO
LINE Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*2
RGB/Component*3 BNC
R/R-Y: Non-composite:0.7 Vp-p, 75 Ω
G/Sync on Green/Y: Composite:1.0 Vp-p, sync negative, 75 Ω
Non-composite:0.7 Vp-p, 75 Ω
B/B-Y: Non-composite:0.7 Vp-p, 75 Ω

External sync BNC

4.0 Vp-p negative, 75 Ω
AUDIO
LINE Loop-through Phono
-5 dBu, high impedance
RGB/Component Phono
-5 dBu, high impedance

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*3 RGB and Y/R-Y/B-Y input is switch selectable.

–128–
1-1 Colour video monitors

PVM-2950QM (PAL/NTSC/SECAM/NTSC 4.43)

Cubic Style Monitor

•Switchable aspect ratio(4:3 and 16:9) •A high resolution of
600 TV lines •Beam current feedback circuit for stability in
the colour balace •On-screen menu for adjustment/operation
•Accepts Composite video, Y/C, Component(Y/R-Y/B-Y or
RGB) signals •Supplied wireless remote control unit RM-854
controls all monitor functions
Supplied accessories: AC power cord, AC plug holder, Remote controller
RM-854, Battery for RM-854, Operation manual
Optional accessories: Speaker system SS-X7A
TV tuner unit TU-1040E

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1 (automatically
selected)
Picture tube: 72.9 cm (29-inch), Super Trinitron tube, visible picture
size 67.5 cm (27-inch) measured diagonally,
110° deflection
Horizontal resolution: 600 TV lines
Audio power output: 7 W+7 W, 8 to 16 Ω
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 165 W (typical)
Dimensions: 687 (W) × 538 (H) × 529 (D) mm
(271⁄8 × 211⁄4 × 207⁄8 inches)
Mass: 52 kg (114 Ib 10 oz)
VIDEO

PRODUCTS
LINE 1/2

DISPLAY
Composite*2: Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
Y/C*2: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
C(chrominance):
PAL:0.3 Vp-p, Automatic 75 Ω termination*3
NTSC:0.286 Vp-p, Automatic 75 Ω termination*3
LINE 3
RGB/Component: BNC
R/R-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync on G/G/Y: Composite: 1.0 Vp-p, sync negative, 75 Ω
Non-composite: 0.7 Vp-p, 75 Ω
B/B-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync: Composite sync: BNC
Analogue level: 0.5 to 5.0 Vp-p, high
impedance, positive/negative
TTL level: positive/negative
HD/VD separate: BNC
Analogue level: 0.5 to 5.0 Vp-p, high
impedance, positive/negative
TTL level: positive/negative
AUDIO
LINE 1/2 Loop-through Phono (×2)
-5 dBu, high impedance
LINE 3 Phono (×2)
-5 dBu, high impedance

RM-854

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–129–
 1-1 Colour video monitors

PVM-20S1WE/20S1WA*1(PAL/NTSC/SECAM/NTSC4.43)
Colour Video Monitor with 16:9 aspect ratio
•16:9 aspect ratio CRT with dark panel for high contrast
image reproduction •Accepts component (Y/R-Y/B-Y), RGB,
Y/C and composite signals •Beam current feedback circuit
for stability in the colour balance •Optional component serial
digital interface kits BKM-101C (video) / 102 (audio)
available •Switchable aspect ratio (4:3 and 16:9) •Colour
temperature D65, D93 or user preset (3200K to 10000K)
selectable •On-screen display for adjustment/operation •User
preset function •Underscan, Blue Only and H/V delay mode
available •Auto chroma/phase setup*2 •Accepts external sync
•Digital 3-line comb filter •Auto/Manual degaussing
•Mountable into an EIA standard rack with the optional
SLR-103 slide rail kit
Supplied accessories: 20-pin remote cable
Tally label
AC power cord
AC plug holder
Blind panel kit for SLR-103A*3
Operation manual
Optional accessories: BKM-101C (component serial digital interface kit
(video))
BKM-102 (component serial digital interface kit
(audio))
BKM-103 (serial remote control kit for RS-422A)
SLR-103A (slide rail)

Specifications
PRODUCTS
DISPLAY

CRT:
AG pitch: Variable pitch 0.65 to 0.75 mm
Phosphor: P-22
Visible screen size: 46 cm (18-inch) diagonally
Resolution: 300 TV lines
Colour system: PAL, NTSC, SECAM, NTSC4.43*4 RGB/Component (selectable):*7
Aperture correction: 0 to +6 dB R/R-Y: 0.7 Vp-p ±6 dB
Frequency response: G: 0.7 Vp-p ±6 dB
LINE: 6 MHz (±3 dB) *Y signal only Sync on G: 0.3 Vp-p ±6 dB
RGB: 6 MHz (±3 dB) Y: 1.0 Vp-p ±6 dB
Synchronization: AFC time constant 1.0 mS B/B-Y: 0.7 Vp-p ±6 dB
Normal scan: 7% over scan Loop-through BNC automatic 75 Ω termination*6
Under scan: 5% under scan External sync: 4.0 Vp-p ±6 dB, negative
Linearity: Loop-through BNC automatic 75 Ω termination*6
H: less than 8% (typical) Regulation Compliance:
V: less than 7% (typical) PVM-20A1WE UL 1950, DHHS, FCC Class-A, CSA 22.2, No. 950,
Convergence: DNHW, IC Class-A, EN60950, EN55022 Class-B,
Centre: 0.6 mm (typical) EN50082-1, EN60555-2
Peripheral: 1.2 mm (typical) PVM-20S1WA: AS/NZS 3548, AS/NZS 4252.1
Raster size stability:
H: 1.0%
V: 1.5%
HV regulation: 4.0%
Colour temperature: D65, D93, USER (3200K to 10000K)
Speaker out: 0.8 W (distortion: less than 5%)
Power consumption: 100 W (with SDI: 110 W)
AC input range: AC 220 to 240 V (50/60 Hz)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operation humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Dimensions: 482 (W) × 397 (H) × 503 (D) mm
19 × 153⁄4 × 197⁄8 inches
Mass: Approx. 25 kg (55 lb 2 oz)
{including SDI : 26 kg (57 lb 5 oz)}

Inputs/Outputs
Line A/B*5: 1.0 Vp-p±6 dB
Loop-through BNC automatic 75 Ω termination*6
Line C*5:
Y: 1.0 Vp-p ±6 dB
C(NTSC): 0.286 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic 75 Ω
termination*6

*1 PVM-20S1WA is an Australian version.

*2 Phase setup is for NTSC signals only.
*3 Because the bezel protrudes from the rack when you mount the PVM-20S1WE/20S1WA, you cannot completely insert the SLR-103A.
The blind panel kit is supplied to cover the exposed part of the slide rail.
*4 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*5 The Y/C input has priority over the Composite video input.
*6 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*7 Video amplitude 100/0/100 colour bars.

–130–
1-1 Colour video monitors

PGM-200R1E/200R1A*
Colour Graphic Monitor
•Cubic style colour graphic monitor •Accepts VGA signals (fH
31.5 kHz, fV 60 Hz/70 Hz) •The optional BKM-201SC Scan
Converter Adaptor enables the monitor to serve as a multi-
frequency monitor (capture range: fH 15.6 kHz to 85 kHz, fV
50 Hz to 120 Hz) •Active loop-through output •ID remote
control •Wide range power supply (switchable between 100
to 120 V and 220 to 240 V AC)
Supplied accessories: AC power cord (1)
AC plug holder (1)
Remote controller RM-921 with
two AA (R6) batteries (1)
Ferrite core (2)
Operating instructions (1)
Optional accessories: Scan converter adaptor BKM-201SC
Cooling fan unit BKM-202FN
Speaker system SS-X7A
TV tuner TU-1040E

Specifications
Picture performance
CRT: 29-inch Super Trinitron tube, visible picture size
675 mm (27-inch viewable area measured
diagonally), AG pitch (variable) 0.70 to 0.85 mm,
Anti-glare and anti-static
Resolution: 640 × 480 dots max.
Scanning frequency: fH 31.5 kHz fV 60/70 Hz, fH 31.25 kHz fV 50 Hz
Frequency response: 16 MHz (–3 dB)
Line pull range: Horizontal: ±500 Hz

PRODUCTS
DISPLAY
Vertical: -8 Hz
Zooming: Within 5%
Colour temperature: 9300K (standard)/6500K switchable

Input/Output
Input R, G, B: BNC
0.714 Vp-p / non-composite, 75 Ω terminated
1.0 Vp-p / composite, 75 Ω terminated
HD/COMP, VD: BNC
H (or composite) sync, V sync
1.0 to 5.0 Vp-p, high impedance
AUDIO (L, R): Phono
500 mV rms, high impedance
Output R, G, B: BNC
0.714 Vp-p / non-composite, 75 Ω terminated
HD/COMP, VD: BNC
H (or composite) sync, V sync
5.0 Vp-p, high impedance
AUDIO (L, R): Phono
Audio gain ±1 dB typical
Total harmonic distortion less than 1%
500 mV rms
SP OUT: 8 to 16 Ω, 7 W + 7 W (at 8 Ω)
12V DC OUT (for BKM-202FN):
12 V DC 200 mA max.
Control S IN/OUT: Mini jack, 5.0 Vp-p

General
Power requirements: 220 V to 240 V AC selectable 50/60 Hz
Power consumption: Max. 183 W
(with BKM-201SC: max. 208.5 W)
Operating temperature: 0˚C to 35˚C (32˚F to 95˚F)
Dimensions: 687 (W) × 538 (H) × 520 (D) mm
(271⁄8 × 211⁄4 × 201⁄2 inches)
Mass: Approx. 55 kg (121 lb 4 oz)

Regulation Compliance:
UL 1950, CSA 22.2 No.950, TÜV EN-60950
(CE LVD), FCC Class A, IC Class A,
CE EN55022 Class-B/EN50082-1/EN60555-2,
VCCI-1, DHHS, DNHW, PTB

*PGM-200R1A is an Australian version

–131–
 1-1 Colour video monitors

PGM-200R2E
Colour Graphic Monitor
•Capable of displaying VGA graphics (fH 31.5 kHz, fV 60
Hz), line-doubled NTSC signals (fH 31.5 kHz, fV 60 Hz) and
line-doubled PAL signals (fH 31.25 kHz, fV 50 Hz) •Optional
Sony BKM-202FN Cooling Fan can be installed to provide
extra ventilation for enclosed areas such as custom-built
cabinets (note: Call your authorized Sony dealer for
installation details) •Optional Sony RM-921 Remote
Controller •Wide range power supply switchable between
100 to 120 V and 220 to 240 V AC
Supplied accessories: AC power cord (1)
AC plug holder (1)
Ferrite core (2)
Operating instructions (1)
Optional accessories: RM-921 Remote Controller
BKM-202FN Cooling Fan Unit

Specifications
Picture performance
CRT: 29-inch Super Trinitron tube, visible picture size 675
mm (27-inch viewable area, measured diagonally),
AG pitch (variable) 0.70 to 0.85 mm, Anti-glare and
anti-static
Resolution: 640 × 480 dots max.
Scanning frequency: fH: 31.5 kHz fV: 60 Hz
fH: 31.25 kHz fV: 50 Hz
Frequency response: 16 MHz (-3 dB)
Line pull range: Horizontal: ±500 Hz
PRODUCTS

Vertical: -8 Hz
DISPLAY

Zooming: Within 5%
Colour temperature: 9300K (standard)/6500K switchable

Input/Output
Input:
R, G, B: BNC
0.714 Vp-p/non-composite, 75 Ω terminated
1.0 Vp-p/composite, 75 Ω terminated
HD/COMP, VD: BNC
H (or composite) sync, V sync
5.0 Vp-p, high impedance
Audio (L, R): Phono
5 dBu, high impedance
Output:
R, G, B: BNC
0.714 Vp-p/non-composite, 75 Ω terminated
HD/COMP, VD: BNC
H (or composite) sync, V sync
5.0 Vp-p, high impedance
Audio (L, R): Phono
Audio gain ±1 dB typical
Total harmonic distortion less than 1%, 5 dBu
12V DC OUT (for BKM-202FN):
12 V DC 200 mA max.
Control S IN/OUT: Mini jack

General
Power requirements: 100 V to 120 V/220 V to 240 V AC selectable,
50/60 Hz (Preset: 220 to 240 V)
Power consumption: max. 183 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Dimensions: 687 (W) × 538 (H) × 520 (D) mm
(271⁄8 × 211⁄4 × 201⁄2 inches)
Mass: Approx. 51.5 kg (113 lb 8 oz)

Regulation Compliance:
UL1950, CSA 22.2 No.950, EN60950,
FCC Class-A, IC Class-A, EN55022 Class-B,
EN50082-1, EN60555-2, VCCI, DHHS, DNHW, PTB

–132–
1-1 Colour video monitors

PGM-100P1MD
Colour Graphic Monitor for medical use
•High contrast Anti-Reflection Coated Trinitron CRT •Light
output of 160 nits •Multiscan capability: fH 30 to 65 kHz, fV:
50 to 120 Hz, 640 × 480 to 1280 × 1024 dots •BNC input with
loop-through output •Built-in speaker •DC 5 V/1 A output
•World-wide medical safety approval for professional medical
use •Control inhibit function prevents the inadvertent
touching of control panel •Fluid resistant cabinet and flush
surface using a sheet-key •GCX mount or optional swivel
stand installation capability •Power saving function
Supplied accessories: AC power cord (1)
Instruction manual
Optional accessories: Monitor stand SU-556
Signal cable SMF-400
(D-sub 15-pin to 5 BNC cable)

Specifications
General
Scanning frequency: VGA to SVGA
Horizontal: 30 to 65 kHz
Vertical: 50 to 120 Hz
Power requirements: 100 to 120 V, 220 to 240 V, 50/60 Hz
Power consumption: 130 W (max.), 7 W (standby)
Dimensions: 368 (W) × 343 (H) × 391 (D) mm
(141⁄2 × 135⁄8 × 151⁄2 inches)
Mass: Approx. 15 kg (33 lb 1 oz)

CRT performance
CRT type: 37 cm (15-inch) Trinitron CRT with P-22 phosphors,

PRODUCTS
visible picture size 35.4 cm (14-inch) (min.)

DISPLAY
measured diagonally, AG pitch 0.25 mm, 90°
deflection
Resolution: 640 × 480 to 1280 × 1024 dots
Colour temperature: 9300K/5000K/USER

Input performance
R/G/B: Loop-through BNC
0.7 Vp-p, Automatic 75 Ω termination
HD/VD: Loop-through BNC
TTL level, automatic 2.2 kΩ termination

Audio performance
Loop-through phono jack -5 dBu, more than 47 kΩ
Speaker out: 0.2 W, monaural

–133–
 1-2 Flat panel monitor

PFM-510A1WE
•16:9 aspect, 42-inch diagonal Plasma Display Panel
•1024 × 1024 pixels resolution, 16.8 million colours •Accepts
signals with horizontal frequency of 15.6 to 80 kHz with built-
in high performance scan converter •Option slot •On-Screen
Display in five languages •Carrying handles and unique
retractable feet for easy handling capability •Self diagnosis
function and detachable power supply block for easy
maintenance access •Various remote control capabilities:
supplied RM-921 remote commander, Control-S or RS-232C
•7 W + 7 W built-in amplifier •Audio monitor out
Supplied accessories: AC power cord (1)
AC plug holder (1)
Remote commander RM-921
AA (R6) battery (2)
Connector cover (2)
Foot support bracket (2)
Ferrite core (2)
Operation manual (1)
Optional accessories: Speaker system SS-X500A
Mounting bracket MB-514
SDI 4:2:2 input adaptor BKM-501D

Specifications
Picture performance
Panel:
Resolution: 1024 × 1024 pixels
Pixel pitch: 0.90 × 0.51 mm
Active area (W/H): 920 × 518 mm
PRODUCTS

42-inch/1,056 mm (measured diagonally)

DISPLAY

Driver: 8-bit RGB

Colours: 16.8 million simultaneously
Type: AC-type Plasma Display Panel with anti-glare screen
Colour system: NTSC/PAL (Composite, Y/C, YUV, RGB), HDTV
(Y/PB/PR, RGB)
Capture range: fH: 15.6 kHz to 80 kHz
fV: 48 Hz to 120 Hz
Sampling rate: 12.5 to 50 MHz offset phase max.
Preset signals: 12 formats
Inputs/Outputs
RGB 1: BNC
RGB: 0.714 Vp-p/non-composite, 1.0 Vp-p/composite,
75 Ω automatic termination, loop-through
YUV: 0.7 Vp-p/non-composite (U/V), 1.0 Vp-p/composite
(Y), 75 Ω automatic termination, loop-through
HD/COMP, VD: H (or composite) sync, V sync, 1.0 to 5.0 Vp-p,
75 Ω high impedance, loop-through
Audio (L/R): Phono, 500 mV rms, high impedance, loop-through
RGB 2: D-sub 15-pin
RGB: 0.714 Vp-p/non-composite, 1.0 Vp-p/composite
External sync: H (or composite) sync, V sync, 1.0 to 5.0 Vp-p,
75 Ω high impedance (L) (R)
Audio (L/R): Phono, 500 mV rms, high impedance
LINE:
Composite: BNC, 1.0 Vp-p, sync negative, General
75 Ω automatic termination, loop-through Power requirements/
Y/C: Mini DIN 4-pin connector Power consumption: 220 to 240 V AC ±10%, 50/60 Hz 2 A, 360 W
Y: 1.0 Vp-p, sync negative Operating temperature:
0 °C to 35 °C (32 °F to 95 °F)
C: 0.286 Vp-p (NTSC)/0.3 Vp-p (PAL), Storage temperature: -10 °C to 40 °C (14 °F to 104 °F)
75 Ω automatic termination, loop-through Humidity: 0% to 90%, no condensation
Audio (L/R): Phono, 500 mV rms, high impedance, loop-through Dimensions: 1036 (W) × 636 (H) × 152 (D) mm
Sync signal: External H/V separate sync or composite sync, (403⁄4 × 25 × 63⁄4 inches)
Sync-on-Green, automatic or manual selectable Mass: Approx. 45 kg (99 lb 3 oz)
*Tri-level sync is available for HDTV Regulation compliance
Audio output: UL 1950 listed, CSA 22.2 No.950, TÜV EN 60 950
Speakers terminal: 6 to 16 Ω, 7 W + 7 W (at 8 Ω) (CE LVD), C-Tick, FCC Class A, IC Class A,
Monitor out (L/R): Phono, 500 mV rms at Volume max., CE EN 55 022 Class-A/EN 50 082-2/EN 60 555-2,
attenuation 0 dB to ∞ (variable), VCCI-A
total harmonic distorsion less than 1%
Remote:
Control S IN/OUT: Stereo mini jack, 5.0 Vp-p
RS-232C: Mini DIN 8-pin

–134–
1-2 Flat panel monitor

PFM-500A2WE
•16:9 aspect, 42-inch diagonal Plasma Display Panel
•852 × 480 pixels resolution, 16.8 million colours •Accepts
signals with horizontal frequency of 15.6 to 100 kHz with
built-in high performance scan converter •Option slot •On-
Screen Display in five languages •Carrying handles and
unique retractable feet for easy handling capability •Self
diagnosis function and detachable power supply block for
easy maintenance access •Various remote control
capabilities: supplied RM-921 remote commander, Control-S
or RS-232C •7 W + 7 W built-in amplifier •Audio monitor out
Supplied accessories: AC power cord (1)
AC plug holder (1)
Remote commander RM-921
AA (R6) battery (2)
Connector cover (2)
Foot support bracket (2)
Ferrite core (2)
Operation manual (1)
Optional accessories: Speaker system SS-X500A
Mounting bracket MB-514
SDI 4:2:2 input adaptor BKM-501D

Specifications
Picture performance
Panel:
Resolution: 852 × 480 pixels
Pixel pitch: 1.08 × 1.08 mm
Active area (W/H): 920 × 518 mm

PRODUCTS
42-inch/1,056 mm (measured diagonally)

DISPLAY
Driver: 8-bit RGB
Colours: 16.8 million simultaneously
Type: AC-type Plasma Display Panel with anti-glare screen
Colour system: NTSC/PAL (Composite, Y/C, YUV, RGB), HDTV
(Y/PB/PR, RGB)
Capture range: fH: 15.6 kHz to 100 kHz
fV: 48 Hz to 120 Hz
Sampling rate: 12.5 to 50 MHz offset phase max.
Preset signals: 12 formats
Inputs/Outputs
RGB 1: BNC
RGB: 0.714 Vp-p/non-composite, 1.0 Vp-p/composite,
75 Ω automatic termination, loop-through
YUV: 0.7 Vp-p/non-composite (U/V), 1.0 Vp-p/composite
(Y), 75 Ω automatic termination, loop-through
HD/COMP, VD: H (or composite) sync, V sync, 1.0 to 5.0 Vp-p,
75 Ω high impedance, loop-through
Audio (L/R): Phono, 500 mV rms, high impedance, loop-through
RGB 2: D-sub 15-pin
RGB: 0.714 Vp-p/non-composite, 1.0 Vp-p/composite
External sync: H (or composite) sync, V sync, 1.0 to 5.0 Vp-p,
75 Ω high impedance (L) (R)
Audio (L/R): Phono, 500 mV rms, high impedance
LINE:
Composite: BNC, 1.0 Vp-p, sync negative, General
75 Ω automatic termination, loop-through Power requirements/
Y/C: Mini DIN 4-pin connector Power consumption: 220 to 240 V AC ±10%, 50/60 Hz 2.0 A 360 W
Y: 1.0 Vp-p, sync negative Operating temperature:
0 °C to 35 °C (32 °F to 95 °F)
C: 0.286 Vp-p (NTSC)/0.3 Vp-p (PAL), Storage temperature: -10 °C to 40 °C (14 °F to 104 °F)
75 Ω automatic termination, loop-through Humidity: 0% to 90%, no condensation
Audio (L/R): Phono, 500 mV rms, high impedance, loop-through Dimensions: 1036 (W) × 636 (H) × 152 (D) mm
Sync signal: External H/V separate sync or composite sync, (403⁄4 × 25 × 63⁄4 inches)
Sync-on-Green, automatic or manual selectable Mass: Approx. 45 kg (99 lb 3 oz)
*Tri-level sync is available for HDTV Regulation compliance
Audio output: UL 1950 listed, CSA 22.2 No.950, TÜV EN 60 950
Speakers terminal: 6 to 16 Ω, 7 W + 7 W (at 8 Ω) (CE LVD), C-Tick, FCC Class A, IC Class A,
Monitor out (L/R): Phono, 500 mV rms at Volume max., CE EN 55 022 Class-A/EN 50 082-2/EN 60 555-2,
attenuation 0 dB to ∞ (variable), VCCI-A
total harmonic distorsion less than 1%
Remote:
Control S IN/OUT: Stereo mini jack, 5.0 Vp-p
RS-232C: Mini DIN 8-pin

–135–
 1-3 LCD monitor

10.4" LMD-1041
Multi-input LCD Monitor
•Lightweight and compact design •Accepts not only computer
signals (fH: 15 kHz to 36 kHz), but also a wide variety of
video signals •Remarkably beautiful colour reproduction with
the brilliant full-colour, high resolution LCD panel •Underscan
function available •IR remote control available for easy
operation when using multiple monitors •Stereo speaker
available •Kensington MicroSaver Security System®, wire
can be attached as a security measure •On-screen menu for
facilitated operation

Supplied accessories: Stand

Screws to secure stand (×2)
AC power cord
Remote control commander RM-LMD1041
Operating instructions

Specifications
General
Video signal system CCIR 625 lines, 50 fields*/EIA 525 lines, 60 fields
Colour system PAL*/NTSC
Scanning frequency VGA, Macintosh 13-inch mode
(fH: 15 to 36 kHz, fV: 45 to 73 Hz)
Panel type a-Si TFT Active Matrix LCD
10.4-inch (264 mm) diagonal, viewable area
10.4-inch (264 mm) (PAL, Computer)/
10.2-inch (259.3 mm) (NTSC) diagonal
Pixel area 211 (H) × 158 (V) mm
(83⁄8 × 61⁄4 inches)
10.4-inch (264 mm) diagonal
PRODUCTS

640 RGB × 480 dots

DISPLAY

Number of dots
Display colour Analogue full colour
Backlight Cold cathode fluorescent light
Power requirements AC 100 to 240 V, 50/60 Hz
Power consumption 28W max. (normal operation)
7W max. (standby)
Storage temperature -20 to 60 °C (-4 to 140 °F)
Operating temperature 5 to 35 °C (41 to 95 °F)
Dimensions: 305 (W) × 215.3 (H) × 57.4 (D) mm
(12 × 84⁄9 × 21⁄4 inches)
(projection not included)
Mass Approx. 2 kg (4 lb 6 oz)
(stand not included)

Video
Line A Loop-through BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω
Line B Loop-through Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
C: PAL 0.3 Vp-p±2dB, 75Ω,
NTSC 0.286 Vp-p ±2 dB
Line C HD D-sub 15-pin
YUV: R-Y/B-Y: 0.7 Vp-p
Y:1.0 Vp-p (sync 0.3 V)
RGB: R/B/G: 0.7 Vp-p
C sync: 1.0 Vp-p

Computer
Computer HD D-sub 15-pin (Line C)
RGB: 0.7 Vp-p, 75 Ω
Sync:
Composite sync: TTL level negative
Separate sync: TTL level negative/positive
Sync on G: 0.3 Vp-p, negative

Audio
Audio signal Mini jack
input: Audio input -5 dBu, 47 kΩ or more
output: Headphone 16 Ω or more
speaker 0.5 W + 0.5 W

* Line reduction PAL signal.

–136–
1-4 Monochrome video monitors

PVM-146E (CCIR/EIA)
Black & White Monitor
•CCIR or EIA automatic selection •Switchable aspect
ratio(4:3 and 16:9) •A high resolution of 1000 TV lines at
centre •Incorporates a CRT with D65 •H/V delay, Underscan
capability •Equipped with a notch filter •Built-in speaker for
audio monitoring •Accepts e×ternal sync •Tally input •Rack
mountable with the optional mounting bracket MB-502B and
slide rail kit SLR-102
Supplied accessories: AC power cord, AC plug holders, Number plate (1 set),
Remote connector 8-pin, Operation manual
Optional accessories: Rack mounting bracket MB-502B
Slide rail kit SLR-102

Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Picture tube: 34 cm (14-inch) CRT, 32.1 cm (13-inch) visible picture
measured diagonally, 90° deflection
Horizontal resolution: 1000 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC 100 to 240 V 0.3 to 0.18 A, 50/60 Hz
Power consumption: 25 W
Dimensions: 346 (W) × 340 (H) × 330 (D) mm
(135⁄8 × 131⁄2 × 13 inches)
Mass: 11 kg (24 lb 4 oz)
VIDEO AUDIO
Line A: Loop-through BNC, 1 Vp-p, sync negative, Automatic Line A: Loop-through Phono, -5 dBu, high impedance

PRODUCTS
DISPLAY
75 Ω termination* Line B: Loop-through Phono, -5 dBu, high impedance
Line B: Loop-through BNC, 1 Vp-p, sync negative, Automatic
75 Ω termination*
External sync: Loop-through BNC, 1 to 4 Vp-p negative, Automatic
75 Ω termination*
* 75 Ω termination is automatically set to OFF when connection is made to the OUT
connector

PVM-145E (CCIR/EIA)
Black & White Monitor
•CCIR or EIA automatic selection •A high resolution of
1000 TV lines at centre •Built-in speaker for audio
monitoring •Accepts external sync •Rack mountable with the
optional mounting bracket MB-502B and slide rail kit SLR-
102
Supplied accessories: AC power cord, AC plug holders, Operation manual
Optional accessories: Rack mounting bracket MB-502B
Slide rail kit SLR-102

Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Picture tube: 34 cm (14-inch) CRT, 32.1 cm (13-inch) visible picture
measured diagonally, 90° deflection
Horizontal resolution: 1000 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC 100 to 240 V 0.3 to 0.18 A, 50/60 Hz
Power consumption: 25 W
Dimensions: 346 (W) × 340 (H) × 330 (D) mm
(135⁄8 × 131⁄2 × 13 inches)
Mass: 11 kg (24 lb 4 oz)
VIDEO
Line A: Loop-through BNC, 1 Vp-p, sync negative, Automatic
75 Ω termination*
Line B: Loop-through BNC, 1 Vp-p, sync negative, Automatic
75 Ω termination*
External sync: Loop-through BNC, 1 to 4 Vp-p negative, Automatic
75 Ω termination*
AUDIO
Line A: Loop-through Phono, -5 dBu, high impedance

Line B: Loop-through Phono, -5 dBu, high impedance

–137–
 1-4 Monochrome video monitors

PVM-96E (CCIR/EIA)
Black & White Monitor
•CCIR/EIA automatic selection •Switchable aspect ratio
(4:3 and 16:9) •A high resolution of 900 TV lines at center
•Incorporates a CRT with D65 •H/V delay, Underscan
capability •Equipped with a notch filter •Built-in speaker for
audio monitoring •Accepts external sync •Tally input •Rack
mountable with a second PVM-96E or an optional blank
panel MB-509 by using the optional MB-507 rack mounting
bracket
Supplied accessories: AC power cord, AC plug holders, Remote connector
8-pin, Operation manual
Optional accessories: Rack mounting bracket MB-507
Blank panel MB-509

Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Picture tube: 23.0 cm (9-inch) CRT, 21.7 cm (9-inch) visible picture
measured diagonally, 90° deflection
Horizontal resolution: 900 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC 100 to 240 V 0.3 to 0.18 A, 50/60 Hz
Power consumption: 23 W
Dimensions: 217 (W) × 218 (H) × 250 (D) mm
(85⁄8 × 85⁄8 × 97⁄8 inches)
Mass: 5.5 kg (12 lb 2 oz)
AUDIO
PRODUCTS

VIDEO
DISPLAY

Line A: Loop-through Phono, -5 dBu, high impedance

Line A: Loop-through BNC
Line B: Loop-through Phono, -5 dBu, high impedance
1 Vp-p, sync negative, Automatic 75 Ω termination*
Line B: Loop-through BNC
1 Vp-p, sync negative, Automatic 75 Ω termination*
External sync: Loop-through BNC, 1 to 4 Vp-p negative, Automatic * 75 Ω termination is automatically set to OFF when connection is made to the OUT
75 Ω termination* connector.

PVM-95E (CCIR/EIA)
Black & White Monitor
•CCIR/EIA automatic selection •A high resolution of 900 TV
lines at centre •Built-in speaker for audio monitoring
•Accepts external sync •Rack mountable with a second
PVM-95E or an optional blank panel MB-509 by using the
optional MB-507 rack mounting bracket
Supplied accessories: AC power cord, AC plug holders, Operation manual
Optional accessories: Rack mounting bracket MB-507
Blank panel MB-509

Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Picture tube: 23.0 cm (9-inch) CRT, 21.7 cm (9-inch) visible picture
measured diagonally, 90° deflection
Horizontal resolution: 900 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC 100 to 240 V 0.3 to 0.18 A, 50/60 Hz
Power consumption: 23 W
Dimensions: 217 (W) × 218 (H) × 250 (D) mm
(85⁄8 × 85⁄8 × 97⁄8 inches)
Mass: 5.5 kg (12 lb 2 oz)
VIDEO
Line A: Loop-through BNC, 1 Vp-p, sync negative, Automatic
75 Ω termination*
Line B: Loop-through BNC, 1 Vp-p, sync negative, Automatic
75 Ω termination*
External sync: Loop-through BNC, 1 to 4 Vp-p negative, Automatic
75 Ω termination*
AUDIO
Line A: Loop-through Phono, -5 dBu, high impedance
Line B: Loop-through Phono, -5 dBu, high impedance

* 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–138–
1-4 Monochrome video monitors

PVM-4B1E (CCIR/EIA)
Black & White Video Monitor
•Ideal for use for camera monitoring in video studio and
surveillance systems with multiple camera installations
•Compatible with CCIR and EIA systems (automatically
selected) •High resolution of 500 TV lines •Stable picture
reproduction with the high voltage regulation circuit •Accepts
an external sync signal •Loop-through video and sync
terminals with automatic 75 Ω termination •Can be mounted
in a standard 19-inch rack •Individual power and individual
controls available
Supplied accessories: AC power cord (1)
AC plug holder (1 set)
Operating instructions (1)

Specifications
General
System: CCIR 625 lines/50 fields, EIA 525 lines/60 fields
(automatically selected)
Frequency response: 10 MHz (-3 dB)
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 59 W
Dimensions: 483 (W) × 133 (H) × 356 (D) mm
(191⁄8 × 51⁄4 × 141⁄8 inches)
Mass: 11.7 kg (25 lb 13 oz)
Operating temperature: 0 to 35 °C (32 to 95 ˚F) Input performance
Operating humidity: 0 to 90% VIDEO: Loop-through BNC
CRT performance 1.0 Vp-p ±6 dB, sync negative,
CRT type: 10 cm (4-inch) CRT, visible picture size 9.4 cm automatic 75 Ω termination
(33⁄4 inch) (min.) measured diagonally, 50˚ deflection EXT SYNC: Loop-through BNC

PRODUCTS
0.5 to 4.0 Vp-p, sync negative,

DISPLAY
Resolution: 500 TV lines
Picture performance automatic 75 Ω termination
Normal scan: 7% overscan Regulation Compliance:
Linearity: H: less than 8%, V: less than 7% CE, LVD (TÜV)

–139–
 1-5 Monitor accessories
BKM-101C/102
Component serial digital interface kit 101C (video)/
102(audio)
•Component serial digital interface for
PVM-20M4E/20M4A/20M2E/14M4E/14M4A/14M2E/14M2A

Mass: BKM-101C:820 g (1 lb 13 oz)

870 g (1 lb 15 oz)
(with installation kit for PVM-2054QM)
BKM-102: 130 g (4.6 oz)

BKM-103
Serial remote contol kit
• RS-422 serial remote contol kit for
PVM-20M4E/20M4A/20M2E/14M4E/14M4A/14M2E/14M2A

Mass: 157 g (5.5 oz)

PRODUCTS
DISPLAY

RM-921
Remote controller
• Remote controller for PGM-200R1E*/200R1A*/200R2E and
PFM-510A1WE*/500A2WE*

Dimensions: 43 (W) × 213 (H) × 25 (D) mm

(13⁄4 × 81⁄2 × 1 inches)
Mass: 125 g (4 oz) with batteries

*The RM-921 is supplied with the PGM-200R1E/200R1A and PFM-510A1WE/500A2WE.

BKM-201SC
Scan Converter Adaptor
•Scan converter adaptor for PGM-200R1E/200R1A
•Capable of converting signals with fH 15.6 to 85kHz into VGA

Format Conversion
Capture range: fH 15.6 kHz to 85 kHz, fV 50 Hz to 120 Hz
Sampling rate: 17.9 to 40 MHz offset phase max.
Output pixel clock: 25.2 to 38 MHz max.
Line doubler: Line doubled vertically for each field

Dimensions: 88 (W) × 439 (H) × 254.6 (D) mm

(31⁄2 × 173⁄8 × 101⁄8 inches)
Mass: Approx. 2.35 kg (5 lb 3 oz)

–140–
1-5 Monitor accessories
BKM-202FN
Cooling fan unit
•Cooling fan unit for PGM-200R1E/200R1A/200R2E
•Prevents heat build up inside the cabinet by powerfully ventilating
the air out of the monitor
•DC 12 V supplied from the monitor

Dimensions: 80 (W) × 80 (H) × 25 (D) mm

(31⁄4 × 31⁄4 × 1 inches)
Mass: 125 g (4 oz)

BKM-501D
SDI 4:2:2 input adaptor
•Input adaptor for PFM-510A1WE/500A2WE
•SDI Video and Audio decoding

Dimensions: 53 (W) × 359 (H) × 260 (D) mm

(21⁄8 × 141⁄4 × 101⁄4 inches)
Mass: Approx. 1.8 kg (3 lb 15 oz)

PRODUCTS
DISPLAY
MB-502B
Mounting bracket
•Bracket for PVM-14M4E/14M4A/14M2E/14M2A/14M2MDE/
14M2MDA/14N6E/14N6A/14N5E/14N5A/14N5MDE/146E/145E
(used with SLR-102)

Dimensions: 483 (W) × 355 (H) × 302 (D) mm

(191⁄8 × 14 × 12 inches)
Mass: 3.8 kg (8 lb 6 oz)

MB-508
Mounting attachment
•Blank panel for PVM-6041QM

Dimensions: 146 (W) × 168.5 (H) × 63 (D) mm

(53⁄4 × 63⁄4 × 21⁄2 inches)
Mass: 200 g (7 oz)

–141–
 1-5 Monitor accessories
MB-509
Mounting attachment
•Blank panel for PVM-9045QM/9043MD/
9042QM/9040ME/96E/95E

Dimensions: 217 (W) × 212.5 (H) × 63 (D) mm

(85⁄8 × 83⁄8 × 21⁄2 inches)
Mass: 400 g (14 oz)

MB-510
Mounting bracket
•Bracket for DMIF-1000/2000

Dimensions (with two DMIF-1000/2000):

482 (W) × 44 (H) × 280 (D) mm
(19 × 13⁄4 × 111⁄8 inches)
Mass: 300 g (10 oz)
PRODUCTS
DISPLAY

MB-514
Mounting bracket for PFM-510A1WE/500A2WE
•For wall-mounting installation
•Monitors can be tilted 0 to 20 degrees downward from the wall
•Separate parts for easy installation

Dimensions: Bracket for wall: 455 (W) × 500 (H) × 57 (D) mm

(1815⁄16 × 1911⁄16 × 21⁄4 inches)
Bracket for monitor: 470 (W) × 535 (H) × 56.5 (D) mm
(185⁄8 × 211⁄8 × 21⁄4 inches)
Mass: Bracket for wall: Approx. 5.2 kg (11 lb 7 oz)
Bracket for monitor: Approx. 5.8 kg (12 lb 13 oz)

MB-520
Mounting bracket
•19-inch rack mount kit for 6-inch and 9-inch monitors

Dimensions: 479 (W) × 222 (H) × 422.3 (D) mm

(187⁄8 × 83⁄4 × 163⁄4 inches)
Mass: 2.7 kg (5 lb 15 oz)

–142–
1-5 Monitor accessories
VF-504
Monitor ENG kit
•Monitor hood and cord reel for
PVM-6041QM

Dimensions: Hood:
159 (W) × 172 (H) × 160 (D) mm
(63⁄8 × 67⁄8 × 63⁄8 inches)
(with PVM-6041QM):
159 (W) × 178 (H) × 567.5 (D) mm
(63⁄8 × 71⁄8 × 223⁄8 inches)
Mass: 400 g (14 oz)

VF-505
Monitor ENG kit
•Monitor hood and cord reel for PVM-9045QM/9042QM

Dimensions: Hood:
230 (W) × 215 (H) × 200 (D) mm
(91⁄8 × 81⁄2 × 77⁄8 inches)
(with PVM-9045QM/9042QM):
230 (W) × 222 (H) × 607.5 (D) mm
(91⁄8 × 83⁄4 × 24 inches)
Mass: 500 g (1 lb 1 oz)

PRODUCTS
DISPLAY
DC-L10
Battery adaptor
•Attaches a rechargeable Lithium-ion battery pack BP-L60A or
BP-L90A to PVM-9045QM/9042QM/6041QM
•Retractable handle
•Easily detachable upper part of adaptor bracket

Specification
Operating time*:
BP-L60A Approx. 100 min. (typical)
BP-L60A Approx. 160 min. (typical)
*Actual operating times may vary.
Dimensions: 315 (W) × 146 (H) × 100 (D) mm
(121⁄2 × 53⁄4 × 4 inches)
Mass: With attachment frames for 9-inch monitor: 2.35 kg (5 lb 19 oz)
With attachment frames for 6-inch monitor: 2.15 kg (4 lb 28 oz)
DC output: DC 12 V, Right angle XLR 4-pin connector (female)
DC fuse: 5A

DCC-XLR4
Car battery cord
• Car battery cord for PVM-9045QM/9042QM/6041QM

Power requirements:
12 V/24 V DC
Output voltage:
12 V: 5 A (Max.)
24 V: 5 A (Max.)
Cord length: 3 m (9 ft 9 inches)
Mass: 175 g (6 oz)

–143–
 1-5 Monitor accessories
SU-556
Monitor stand
•Stand for PGM-100P1MD

Dimensions: 240 (W) × 57 (H) × 238 (D) mm

(91⁄2 ç 21⁄4 ç 93⁄8 inches)
Mass: Approx. 450 g (1 lb)

SS-X7A
Speaker system
•High quality stereo sound by two-way bass-reflex speaker system
with cone-type woofer and tweeter

Dimensions: 183 (W) ç 280 (H) ç 90 (D) mm

(71⁄4 ç 111⁄8 ç 35⁄8 inches)
Mass: Approx. 1.9 kg per speaker
(4 lb 3 oz)
PRODUCTS
DISPLAY

SS-X500A
Speaker system
•Speaker design matches that of PFM-510A1WE/500A2WE
•Can be attached to the monitor or mounted separately
•Effective frequency range: 70 Hz to 20000 Hz
•Characteristic sensitivity level: 88 dB (1 W, 1 m)
•Input capability: 120 W

Dimensions: 159 (W) × 634 (H) × 90.3 (D) mm

(21⁄4 × 25 × 35⁄8 inches)
Mass: Approx. 3.5 kg per speaker
(7 lb 11 oz)

TU-1040E
TV tuner unit
•TV tuner unit compatible with various TV broadcast
systems: B/G/H, L, I and D/K

Dimensions: 212 (W) × 49.3 (H) × 361 (D) mm

(83⁄8 × 2 × 141⁄4 inches)
Mass: 2.05 kg (4 lb 8 oz)

–144–
1-5 Monitor accessories
SLR-102/103A
Slide rail kit
•SLR-102 for PVM-14M4E/14M4A/14M2E/
14M2A/14M2MDE/14M2MDA/14N6E/
14N6A/14N5E/14N5A/146E/145E (used
with MB-502B)
•SLR-103A for PVM-20M4E/20M4A/
20M2E/20M2MDE/20M2MDA/20N6E/
20N6A/ 20N5E/20N5A

SLR-102 SLR-103A

PRODUCTS
DISPLAY

–145–
 2-1 Multiscan projectors

VPH-G90E/G90M*1 (PAL/NTSC/SECAM/NTSC 4.43)

•Multiscan capability: horizontal 15 kHz to 150 kHz, vertical

35 Hz to 150 Hz •Incorporates new, high resolution 9-inch
electromagnetic focus CRTs •Incorporates a Universal
Optical Coupling •Remarkable light output of 350 ANSI lm*2
(150 kHz: 50 Hz, 6500 K), 1300 lm (peak white), 500 lm (all
white) •High resolution of 700 TV lines (VIDEO), 1100 TV
lines (HDTV) 2500 x 2000 pixels (RGB, measured at fH: 102
kHz, fV: 50 Hz) •Wide RGB bandwidth of 135 MHz •Wider
range of registration adjustments for accurate registration
•HACC lens for superior and stable picture performance
•Video decoder circuit for enhanced video picture quality*3
•Sony Digital Reality Creation •Responds to both
analogue/digital RGB signals •Supplied wired/wireless
remote control unit RM-PJ1001 controls all the projector
functions such as set-up adjustments and operational
functions •Various optional accessories available for system
versatility •Desk top mounted projection, ceiling mounted
projection, floor mounted projection and rear projection
capabilities •Can be used with screens from 90 to 300 inches
VPH-G90E
in size with simple adjustments
Supplied accessories: Remote control unit RM-PJ1001
Remote control cable 15 m (Stereo Mini Jack)
Adjustment plate
AA size battery (3) VPH-G90M
AC power cord
Operating manual C IN: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
Installation manual Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
PRODUCTS
DISPLAY

Optional accessories: Interface board: IFB-12A/21/50/1000/1400/G90E*4 Y/C IN*5: Loop-through Mini DIN 4-pin
Signal interface cables: SIC-10/20A/20C/22/M1/M5/ Y (luminance): 1.0 Vp-p ±2 dB sync negative,
M15/M25/M50 75 Ω automatic termination*6
Signal interface switchers: PC-3000/1271M C (chrominance):0.3 Vp-p ±2 dB (PAL) 75 Ω automatic termination*6 or
Interface unit: IFU-1271M Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω automatic
Suspension support: PSS-90/10 termination*6
Infrared remote control receiver: RM-PJ10 Input A:
Signal adaptor: ADP-20 Analogue RGB/
HD D-sub 15-pin to 5 BNC cable: SMF-400 Component: BNC
HD D-sub 15-pin to HD D-sub 15-pin cable: SMF-401 R/R-Y/PR: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
Projection lens: VPHL-9270 G/Y: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
100-inch flat screen*1: VPS-100FH G with Sync: 1.0 Vp-p, ±2 dB sync negative, 75 Ω terminated
120-inch flat screen*1: VPS-120FH B/B-Y/PB: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
SYNC/HD: Composite sync:
Specifications 0.6 to 8.0 Vp-p, high impedance positive/negative
General Horizontal sync:
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields 0.6 to 8.0 Vp-p, high impedance positive/negative
(switching of CCIR to EIA or vice versa is VD: Vertical sync:
automatically done) 0.6 to 8.0 Vp-p, high impedance positive/negative
Colour system: PAL/NTSC/SECAM/NTSC4.43 automatically selected HDVS (Y/PB/PR): BNC
Brightness: ANSI*2 350 lm (fH: 150 kHz, fV: 50 Hz, 6500 K) Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
ANSI 130 lm (fH: 15 kHz, fV: 60 Hz, 6500 K) PB/PR: Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p,
Peak white: 1300 lm ±0.35 Vp-p ±2 dB, 75 Ω
All white: 500 lm HDVS (GBR): BNC
Colour temperature: 6500K G with sync: 1.0 Vp-p ±2 dB, 75Ω terminated
RGB bandwidth: 135 MHz (-3dB) Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
Resolution: 700 TV lines (video), 1100 TV lines (HDTV) B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
2500 × 2000 pixels INPUT B: Open slot for optional IFB boards
(RGB, measured at fH: 102 kHz, fV: 50 Hz) Control S
Scanning frequency: Horizontal: 15 to 150 kHz /PLUG IN POWER:
Vertical: 38 to 150 Hz IN: Stereo Mini Jack
Test signals: Cross hair, Hatch reverse (9 × 9/17 × 17), Dot (9 × 9), 5.0 Vp-p, Plug-in power DC 5 V, Max. output: 60 mA
Dot (17 × 17) & Hatch (5 × 5), H/H reverse, OUT: 5.0 Vp-p
ME/ME reverse, All white, Window, REMOTE:
Window and line colour bar, Pluge, RS-232C/RS-422A: IN: D-sub 9-pin (Female)
Stair-step, Sub-pattern, Cross (9 × 9), PJ COM (RS-485): IN: D-sub 9-pin (Female)
Hatch (5 × 5), 10 IRE, 100 IRE OUT: D-sub 9-pin (Female)
Power requirements: AC 220 to 240 V, 50/60 Hz LINK:
Power consumption: Max. 1000 W, Stand-by 14 W, IN: Stereo Mini Jack
Power saving mode 600 W OUT: Stereo Mini Jack
Heat dissipation: 3412.5 BTU TRIG: Mini Jack
Mass: Approx. 110 kg (242 lb 8 oz) Power ON: DC 12 V, Output impedance 4.7 kΩ
Operating temperature: 0 to 40 °C (14 to 104 °F) Power OFF: 0V
Operating humidity: 35 to 85% *1 Some items are not available in some areas. For details, please consult your nearest
Inputs/Outputs Sony office.
Video*4: *2 ANSI lumens is a measuring method of American National Standards Institute IT7.215.
Composite*5: Loop-through BNC *3 Applicable for VPH-G90M only.
*4 VPH-G90E requires optional IFB-G90E video input board. IFB-G90E is applicable for
1Vp-p, ±2 dB sync negative,
VPH-G90E only.
75Ω automatic termination*6 *5 The Y/C input has priority over the Video input.
Y IN: BNC, 1 Vp-p ±2 dB sync negative, 75 Ω terminated *6 75 Ω termination is automatically set to OFF when connection is made to the OUT
connector.

–146–
2-1 Multiscan projectors

VPH-G70QM/G70QMG*1
(PAL/NTSC/SECAM/NTSC4.43/PAL-M)
•Multiscan capability: horizontal 15 kHz to 110 kHz, vertical 38 Hz to
150 Hz •Incorporates newly developed 8-inch electromagnetic focus
CRTs •Incorporates an universal optical coupling •Remarkable light
output of ANSI lumens9 (colour temperature: 6500°K): 240 lm (fH:
110 kHz, fV: 60 Hz)/ 200 lm (fH: 15 kHz, fV: 60 Hz), Peak white:
1200 lm •High resolution of 700 TV lines (video)/1100 TV lines
(HDTV*3)/1700 × 1200 pixels (RGB in at fH: 74 kHz, fV: 60 Hz)
•Wide RGB bandwidth of 120 MHz •New hybrid HACC lens for
superb, stable picture performance •Precise registration with the
Key/Pin balance mode and 25-point zone adjustment •Input memory
and Video memory available for facilitated set up •Independent
brightness and colour uniformity adjustments •Incorporates the
Picture orbiting function •Simplified operation for multi-projection
applications such as ABL link and Index operation functions
•Optional internal line-doubler board available •Video decoder circuit
for enhance video picture quality •Various optional accessories
available for system versatility •Desk top mounted projection, ceiling
mounted projection, floor mounted projection and rear projection
capabilities •Can be used with screens from 60 to 300 inches in size
with simple adjustments
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15m)
Adjusting plate
AA size (R6) battery × 3
AC power cord
Operation manual
Installation manual
Optional accessories: Interface board IFB-12/20/21/1000/1301/1400/G70QMG*1 VPH-G70QMG VPH-G70QM
Signal interface cable SIC-10/20A/20C/21/22
Multi-cable*1
CCQ-BRS cable (14-14pin: 2/5/10/25/50m)

PRODUCTS
DISPLAY
SIC-M cable (14-14pin: 1/5/15/25/50m)
Signal interface switcher PC-1271M
Extension board EXB-DS10 (internal line-doubler board)
Interface unit IFU-1271M*1
Suspension support PSS-70
Suspension support PSS-10 Inputs/Outputs
Remote commander RM-PJM800 Video*4:
Infrared remote control receiver RM-PJ10 Composite: Loop-through BNC
Mouse receiver RM-PJ21 1.0 Vp-p ±2 dB sync negative, 75 Ω
Signal adaptor ADP-10 Y IN: 1.0 Vp-p ±2 dB sync negative, 75 Ω
(HD D-sub 15-pin to D-sub 9-pin for SIC cable) C IN: 0.3Vp-p ±2 dB (PAL), 75 Ω or
Signal adaptor ADP-20 (Macintosh® to VGA) Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Monitor cable SMF-400 (HD D-sub 15-pin to 5BNC) Y/C IN: Loop-through Mini DIN 4-pin
Monitor cable SMF-401 (HD D-sub 15-pin to HD D-sub 15-pin) Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
9-pin remote cable RCC-5G/10G/30G C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
(D-sub 9-pin to D-sub 9-pin for RS-422A) Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
100-inch flat screen VPS-100FH*1 Input A: BNC × 5
120-inch flat screen VPS-120FH*1 Analog RGB/Component:
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
G: 0.7 Vp-p ±2 dB positive, 75 Ω,
Specifications G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
Optical B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Projection system: 3 picture tubes, 3 lenses, direct projection system Sync/HD:
Picture tube: 8-inch (phosphor size 6-inch) high luminance, electromagnetic Composite sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
focus tubes Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Projection lens: Double focus, F1.1/135 mm VD:
Screen coverage: 60 to 300-inch measured diagonally, factory preset to 120-inch Vertical sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Light output: ANSI*2: 240lm (fH: 110 kHz, fV: 50 Hz, 6500K) HDTV*3 (Y/PB/PR):
200 lm (fH: 15 kHz, fV: 60 Hz, 6500K) Y: 1.0 Vp-p ±2 dB, 75 Ω
1200 lm (peak white) PB/PR: Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
320 lm (all white) ±0.35 Vp-p ±2 dB, 75 Ω
Throwing distance: 60-inch 1668 mm (5 ft 521/32 inches) HDTV*3 (GBR):
70-inch 1921 mm (6 ft 3 5/8 inches) G with sync: 1.0 Vp-p ±2 dB, 75 Ω
100-inch 2689 mm (8 ft 97/8 inches) Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
120-inch 3200 mm (10 ft 531/32 inches) B/R: 0.7 Vp-p ±2 dB, 75 Ω
150-inch 3972 mm (13 ft 3/8 inches) Input B:
200-inch 5254 mm (17 ft 227/32 inches) Supplied with an IFB-40:
250-inch 6539 mm (21 ft 57/16 inches) 14-pin multi connector (input: male, output: female)
300-inch 7831 mm (25 ft 85/16 inches) CONTROL S IN/ Stereo mini-jack
PLUG IN POWER: 5.0 Vp-p, plug in power DC 5 V, maximum output 60 mA
Signals OUT: Stereo mini-jack
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M 5.0 Vp-p
Resolution: 700 TV lines (video) REMOTE
1100 TV lines (HDTV) RS-422A: D-sub 9-pin (female)
1700 × 1200 pixels ABL Link
(RGB, measured at fH: 74 kHz, fV: 60 Hz) IN: Mini-jack
Scanning frequency: Horizontal: 15 to 110 kHz OUT: Mini-jack
Vertical: 38 to 150 Hz TRIG: Mini-jack
RGB bandwidth: 120 MHz (-3 dB) Power On: DC 5 V, output impedance 4.7 kΩ
Power Off: 0 V
General
Power requirements: AC 220 to 240 V, 50/60 Hz Safety regulations EN60 950 (TÜV), CE, PTB, C-Tick Mark
Power consumption: 720 W, Standby: 7 W
Heat dissipation: 2593.4 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F) *1 Some items are not available in some areas. For details, please consult your nearest
Storage humidity: 10 to 90% Sony office.
Dimensions: 695 (W) × 358 (H) × 948 (D) mm *2 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
(273⁄8 × 141⁄8 × 375⁄16 inches) *3 HDTV: 1125/60 interlaced HDTV studio standard system.
Mass: Approx. 83 kg (183 lb) *4 With the optional IFB-G70QMG installed in the VPH-G70QMG.

–147–
 2-1 Multiscan projectors

VPH-G70VRM*1 (PAL/NTSC/SECAM/NTSC 4.43/PAL-M)

•Designed specifically for use in Virtual Reality and

Simulation applications •Deep focussing area, high resolution
lenses, and extended geometry for use with curved and
dome-style screens •Multiscan capability: horizontal 15 kHz
to 110 kHz, vertical 38 Hz to 150 Hz •Accepts composite and
S Video signals when an appropriate optional interface board
is installed •Incorporates newly developed 8-inch
electromagnetic focus CRTs •Incorporates a universal optical
coupling •High resolution of 700 TV lines (video)/1100 TV
lines (HDTV*2)/1700 × 1200 pixels (RGB measured at fH: 74
kHz, fV: 60 Hz) •Wide RGB bandwidth of 120 MHz •New
hybrid HACC lens for superb, stable picture performance
•Precise registration with the Key/Pin balance mode and 25-
point zone adjustment •Input memory and Video memory
available for facilitated set up •Independent brightness and
colour uniformity adjustments •Incorporates the picture
orbiting function •Simplified operation for multi-projection
applications such as ABL link and Index operation functions
•Optional internal line-doubler board available •Video
decoder circuit for enhanced video picture quality •Various
optional accessories available for system versatility •Can be
used with screens from 60 to 300 inches in size with simple
adjustments •Black cabinet suitable for Virtual Reality and
Simulation installations
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15 m)
PRODUCTS
DISPLAY

Adjustment plate
AA size (R6) battery (3)
AC power cord
Operation manual
Installation manual
Optional accessories: Interface board IFB-12/20/21/40/50/1000/1400
Signal interface cable SIC-10/20A/20B/20C/21/22*1
CCQ-BRS cable (14-14pin: 2/5/10/25/50 m) Scanning frequency: Horizontal: 15 to 110 kHz
SIC-M cable (14-14pin: 1/5/15/25/50 m) Vertical: 38 to 150 Hz
Signal interface switcher PC-1271M RGB bandwidth: 120 MHz (-3 dB)
Extension board EXB-DS10 (internal line-doubler General
board) Power requirements: AC 220 to 240 V, 50/60 Hz
Interface unit IFU-1271M Power consumption: 720 W, Standby: 7 W
Suspension support PSS-70 Heat dissipation: 2457.0 BTU
Suspension support PSS-10 Operating temperature: 0 to 40 °C (32 to 104 °F)
Remote commander RM-PJM800 Operating humidity: 35 to 85%
Infrared remote control receiver RM-PJ10 Storage temperature: -20 to 60 °C (-4 to 140 °F)
Mouse receiver RM-PJ21 Storage humidity: 10 to 90%
Signal adaptor ADP-10 (HD D-sub 15-pin to Dimensions: 695 (W) × 358 (H) × 948 (D) mm
D-sub 9-pin) (273⁄8 × 141⁄8 × 375⁄16 inches)
Signal adaptor ADP-20 (Macintosh® to VGA) Mass: Approx. 83 kg (183 lb)
Monitor cable SMF-400 (HD D-sub 15-pin to 5 BNC) Inputs/Outputs
Monitor cable SMF-401 (HD D-sub 15-pin to HD Input A
D-sub 15-pin) Analogue RGB/Component: BNC
9-pin remote cable RCC-5G/10G/30G (D-sub 9-pin to R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
D-sub 9-pin for RS-422A) G/Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
100-inch flat screen VPS-100FH*1 G with sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
120-inch flat screen VPS-120FH*1 B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Sync/HD
Specifications Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Optical Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Projection system: 3 picture tubes, 3 lenses, direct projection system VD:
Picture tube: 8-inch (phosphor size 6-inch) high luminance, optical Vertical sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
doubled, electromagnetic focus tubes HDTV*2 (Y/PB/PR): BNC
Projection lens: Double focus, F1.2/135 mm Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
(colour purity improved: C element of Red/Green) PB/PR: Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
3
Screen coverage* : 60 to 300 inches (viewable area, measured ±0.35 Vp-p ±2 dB, 75 Ω
diagonally) HDTV*2 (GBR): BNC
(factory preset to 120 inches) G with sync: 1.0 Vp-p ±2 dB, 75 Ω terminated
Acceptable screen radius: Tri-sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
Flat to 2500 mm radius B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
Acceptable throw angle: -2 ° to +30 ° Input B: Open slot for optional IFB board
Light output: ANSI*4: 200 lm (fH: 110 kHz, fV: 60 Hz, 6500K) CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
ANSI*4: 170 lm (fH: 15 kHz, fV: 60 Hz, 6500K) PLUG IN POWER: Plug in power DC 5 V, Max. output: 60 mA
Peak white: 1000 lm, All white: 290 lm CONTROL S OUT: Stereo mini-jack 5.0 Vp-p
Throwing distance: 60-inch 1668 mm (5 ft 521⁄32 inches) REMOTE
70-inch 1921 mm (6 ft 35⁄8 inches) RS-422A: D-sub 9-pin (female)
100-inch 2689 mm (8 ft 97⁄8 inches) ABL Link
120-inch 3200 mm (10 ft 531⁄32 inches) IN: Mini-jack
150-inch 3972 mm (13 ft 3⁄8 inches) OUT: Mini-jack
200-inch 5254 mm (17 ft 227⁄32 inches) TRIG: Mini-jack
250-inch 6539 mm (21 ft 57⁄16 inches) Power On: DC 12 V, output impedance 4.7 kΩ
300-inch 7831 mm (25 ft 85⁄16 inches) Power Off: 0 V
Signals Safety regulations EN 60 950 (TÜV), CE, PTB
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M
(automatically selected) *1 Some items are not available in some areas. For details, please consult your nearest
Sony office.
Resolution: 700 TV lines (video), 1100 TV lines (HDTV) *2 HDTV: 1125/60 interlaced HDTV studio standard system.
1700 × 1200 pixels *3 Throw angle: 15.2°, screen radius = 0 mm.
(RGB, measured at fH: 74 kHz, fV: 60 Hz) *4 ANSI lumens is a measuring method of American National Standards Institute IT7.215.

–148–
2-1 Multiscan projectors

VPH-D50QM*1(PAL/NTSC/SECAM/NTSC 4.43/PAL-M)

•Multiscan capability: horizontal 15 kHz to 64 kHz, vertical 38

Hz to 150 Hz •Incorporates newly developed 7-inch static
focus CRTs •Incorporates an universal air coupling
•Remarkable light output of ANSI lumens*2 (colour
temperature: 6500°K): 160 lm (fH: 64 kHz, fV: 50 Hz)/130 lm
(fH: 15 kHz, fV: 60 Hz), Peak white: 800 lm •High resolution of
700 TV lines (video)/1000 TV lines (HDTV*3)/1280 x 1024
pixels (RGB in at fH: 64 kHz, fV: 60 Hz) •Wide RGB
bandwidth of 75 MHz •Precise registration with the Key/Pin
balance mode •Input memory and Video memory available for
facilitated set up •Video decoder circuit for enhanced video
picture quality •Incorporates the Picture orbiting function
•Simplified operation for multi-projection applications such as
ABL link and Index operation functions •Optional internal line-
doubler board available •Various optional accessories
available for system versatility •Desk top mounted projection,
ceiling mounted projection, floor mounted projection and rear
projection capabilities •Can be used with screens from 60 to
250 inches in size with simple adjustments
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15m)
Adjusting plate
AA size (R6) battery × 3
AC power cord
Operation manual
Installation manual Dimensions: 603 (W) × 345 (H) × 671 (D) mm
Optional accessories: Interface board IFB-12/20/21/1000/1301/1400 (233⁄4 × 135⁄8 × 261⁄2 inches)
Signal interface cable SIC-10/20A/20C/21/22 Mass: Approx. 54 kg (119 lb 1 oz)

PRODUCTS
Multi-cable*1

DISPLAY
CCQ-BRS cable (14-14pin: 2/5/10/25/50m) Inputs/Outputs
SIC-M cable (14-14pin: 1/5/15/25/50m) Video: Loop-through BNC
Signal interface switcher PC-1271M 1.0 Vp-p ±2 dB sync negative, 75 Ω
Extension board EXB-DS10 (internal line-doubler board) S Video:
Interface unit IFU-1271M*1 Y IN: BNC
Suspension support PSS-70 1.0 Vp-p ±2 dB sync negative, 75 Ω
Suspension support PSS-10 C IN: BNC
Remote commander RM-PJM800 0.3 Vp-p ±2 dB (PAL), 75 Ω
Infrared remote control receiver RM-PJ10 Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Mouse receiver RM-PJ21 Y/C IN: Loop-through mini DIN 4-pin
Signal adaptor ADP-10 Y (luminance): 1.0 Vp-p ±2 dB sync negative, 75 Ω
(HD D-sub 15-pin to D-sub 9-pin for SIC cable) C (chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω
Signal adaptor ADP-20 (Macintosh® to VGA) Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Monitor cable SMF-400 (HD D-sub 15-pin to 5BNC) Input A: BNC × 5
Monitor cable SMF-401 Analogue RGB/Component:
(HD D-sub 15-pin to HD D-sub 15-pin) R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
9-pin remote cable RCC-5G/10G/30G G: 0.7 Vp-p ±2 dB positive, 75 Ω
(D-sub 9-pin to D-sub 9-pin for RS-422A) G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
100-inch flat screen VPS-100FH*1 B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
120-inch flat screen VPS-120FH*1 Sync/HD:
Composite sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Specifications Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Optical VD:
Projection system: 3 picture tubes, 3 lenses, direct projection system Vertical sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Picture tube: 7-inch (phosphor size 5.5-inch) static focus CRT HDTV*3 (Y/PB/PR):
Projection lens: Double focus, F1.0/135 mm Y: 1.0 Vp-p ±2 dB, 75 Ω
Screen coverage: 60 to 250-inch measured diagonally, factory preset to 120- PB/PR: Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
inch ±0.35 Vp-p ±2 dB, 75 Ω
Light output: ANSI*2: 160 lm (fH: 64 kHz, fV: 50 Hz, 6500K) HDTV*3(GBR):
130 lm (fH: 15 kHz, fV: 60 Hz, 6500K) G with sync: 1.0 Vp-p ±2 dB, 75 Ω
800 lm (peak white) Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
200 lm (all white) B/R: 0.7 Vp-p ±2 dB, 75 Ω
Throw distance: 60-inch 1902 mm (6 ft 27⁄8 inches) Input B:
70-inch 2179 mm (7 ft 125⁄32 inches) Supplied with an IFB-40: 14-pin multi connector (input: male, output: female)
100-inch 3016 mm (9 ft 103⁄4 inches) CONTROL S IN/ Stereo mini-jack
120-inch 3571 mm (11 ft 819⁄32 inches) PLUG IN POWER: 5.0 Vp-p, plug in power DC 5 V, maximum output 60 mA
150-inch 4424 mm (14 ft 63⁄16 inches) OUT: Stereo mini-jack, 5.0 Vp-p
200-inch 5844 mm (19 ft 23⁄32 inches) REMOTE
250-inch 7257 mm (23 ft 923⁄32 inches) RS-422A: D-sub 9 pin (female)
ABL Link
Signals IN: Stereo mini-jack
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M OUT: Stereo mini-jack
Resolution: 700 TV lines (video) TRIG: Mini-jack
1000 TV lines (HDTV) Power On: DC 5 V, output impedance 4.7 kΩ
1280 × 1024 pixels (RGB, measured at fH: 64 kHz, fV: 60 Hz) Power Off: 0 V
Scanning frequency: Horizontal: 15 to 64 kHz
Vertical: 38 to 150 Hz Safety regulations EN60 950 (TÜV), CE, PTB, C-Tick Mark
RGB bandwidth: 75 MHz -3 dB

General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 450 W, Standby: 7 W
*1 Some items are not available in some areas. For details, please consult your nearest
Heat dissipation: 1535.7 BTU Sony office.
Operating temperature: 0 to 40 °C (32 to 104 °F) *2 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
Operating humidity: 35 to 85% *3 HDTV: 1125/60 interlaced HDTV studio standard system.
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%

–149–
 2-1 Multiscan projectors

VPH-D50HTM (PAL/NTSC/SECAM/NTSC 4.43/PAL-M)

•Multiscan capability: horizontal 15 kHz to 64 kHz, vertical 38

Hz to 150 Hz •Incorporates newly developed 7-inch static
focus CRTs •Incorporates a universal air coupling
•Remarkable light output of ANSI lumens*1 (colour
temperature: 6500°K): 160 lm (fH: 64 kHz, fV: 50 Hz)/130 lm
(fH: 15 kHz, fV: 60 Hz), Peak white: 800 lm •High resolution of
700 TV lines (video)/1000 TV lines (HDTV*2)/1280 × 1024
pixels (RGB in at fH: 64 kHz, fV: 60 Hz) •Wide RGB
bandwidth of 75 MHz •Precise registration with the Key/Pin
balance mode •Input memory and Video memory available for
facilitated set up •Video decoder circuit for enhanced video
picture quality •Incorporates the picture orbiting function
•Simplified operation for multi-projection applications such as
ABL link and Index operation functions •Internal line-doubler
board included as a standard feature •Various optional
accessories available for system versatility •Table-top
projection, ceiling mounted projection, floor mounted
projection and rear projection capabilities •Can be used with
screens from 60 to 250 inches in size with simple adjustments
Supplied accessories: Remote commander RM-PJ1001 Dimensions: 603 (W) × 345 (H) × 671 (D) mm
Remote commander RM-PJD50 (233⁄4 × 135⁄8 × 261⁄2 inches)
Remote commander cable (15 m) Mass: Approx. 54 kg (119 lb 1 oz)
Adjustment plate Inputs/Outputs
AA size (R6) battery (3) Video
Button battery CR2025 (1) Composite: Loop-through BNC
AC power cord 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
Operating manual termination
PRODUCTS

Y IN: BNC, 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated

DISPLAY

Installation manual
Optional accessories: Signal interface cable SIC-10 C IN: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
Interface unit IFU-1271M Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
Suspension support PSS-70 Y/C IN: Loop-through Mini DIN 4-pin
Suspension support PSS-10 Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
Remote commander RM-PJM800 termination
Infrared remote control receiver RM-PJ10 C: 0.3 Vp-p ±2 dB (PAL), 75 Ω automatic termination or
Mouse receiver RM-PJ21 Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω automatic
Monitor cable SMF-400 (HD D-sub 15-pin to 5 BNC) termination
Remote cable RCC-5G/10G/30G Input A/B
(D-sub 9-pin to D-sub 9-pin for RS-422A) Analogue RGB/Component: BNC
100-inch flat screen VPS-100FH*3 R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
120-inch flat screen VPS-120FH*3 G/Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G with sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Specifications
Sync/HD
Optical
Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Projection system: 3 picture tubes, 3 lenses, direct projection system
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Picture tube: 7-inch (phosphor size 5.5-inch) high luminance air
VD
coupled (Colour corrected: Red/Green), static focus
Vertical sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
tubes
HDTV*2 (Y/PB/PR): BNC
Projection lens: Double focus, F1.0/135 mm
Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
Screen coverage: 60 to 250 inches measured diagonally
PB/PR: Tri- sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
(factory preset to 100 inches)
±0.35 Vp-p ±2 dB, 75 Ω
Light output: ANSI*1: 160 lm (fH: 64 kHz, fV: 50 Hz, 6500K)
HDTV*2 (GBR): BNC
ANSI*1: 130 lm (fH: 15 kHz, fV: 60 Hz, 6500K)
G with sync: 1.0 Vp-p ±2 dB, 75 Ω terminated
Peak white: 800 lm
Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
All white: 200 lm
B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
Throw distance: 60-inch 1902 mm (6 ft 27⁄8 inches)
Video (YC)*4
(in 4:3 mode) 70-inch 2179 mm (7 ft 125⁄32 inches)
Y: BNC, 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
100-inch 3016 mm (9 ft 103⁄4 inches)
C: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
120-inch 3571 mm (11 ft 819⁄32 inches)
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
150-inch 4424 mm (14 ft 63⁄16 inches)
Video (Composite)*4
200-inch 5844 mm (19 ft 23⁄32 inches)
VIDEO: 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
250-inch 7257 mm (23 ft 923⁄32 inches)
termination
Signals
CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M
PLUG IN POWER: Plug in power DC 5 V, Max. output 60 mA
Resolution: 700 TV lines (video)
CONTROL S OUT: Stereo mini-jack 5.0 Vp-p
1000 TV lines (HDTV)
REMOTE
1280 × 1024 pixels (RGB, measured at
RS-422A: D-sub 9 pin (female)
fH: 64 kHz, fV: 60 Hz)
ABL Link
Scanning frequency: Horizontal: 15 to 64 kHz
IN: Mini-jack
Vertical: 38 to 150 Hz
OUT: Mini-jack
RGB bandwidth: 75 MHz (-3 dB)
TRIG: Mini-jack
General
Power On: DC 12 V, output impedance 4.7 kΩ
Power requirements: AC 220 to 240 V, 50/60 Hz
Power Off: 0 V
Power consumption: 450 W, Standby: 7 W
Safety regulations EN 60 950 (TÜV), CE, PTB
Heat dissipation: 1535.7 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F) *1 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
Operating humidity: 35 to 85% *2 HDTV: 1125/60/2:1 and 1125/59.94/2:1 (SMPTE-240M/274M) HDTV systems.
Storage temperature: -20 to 60 °C (-4 to 140 °F) *3 Some items are not available in some areas. For details, please consult your nearest
Storage humidity: 10 to 90% Sony office.
*4 Input B only.

–150–
2-2. Projection wall units

RVP-511DMS (PAL/NTSC/SECAM/NTSC 4.43)

•50-inch projection wall unit for various projection wall

applications •Light in weight (88 kg) and a short cabinet
depth (1236 mm) for easier handling and stacking •Input
capability: double scan video signals and computer signals
which conform to VGA mode 3 (31.469 kHz/59.94 Hz)
standard •Optional PWB-411D video input board available
for composite, Y/C, component and 15 kHz RGB video
signals •Double scan capability for flicker free signal
reproduction when using with the optional PWB-411D video
input board •Adopts optical coupling CRT for high contrast
image display •Colour temperature selection:
3200K/6500K/9300K/User preset (factory preset: 6500K)
•Two-part construction enables the CRT assembly, together
with the electronic chassis, to be easily separated from the
cabinet •Wide viewing angle: horizontal 150 degrees, vertical
70 degrees •Optional VPS-515RF/511RF screens with ultra-
thin screen surround are available •Optional CHP-411DM
projection wall chassis available for system versatility
•Optional wired/wireless remote control unit RM-PJ1292*1
with address function for all projector control functions,
including inputs selection, picture control, RGB size and shift
and centering controls
Supplied Accessories: AC power cord (1)
Remote control cable (1.2 m × 1)
Operation manual (1)
Optional Accessories: VPS-515RF: Optional Screen with 0.2 mm screen

PRODUCTS
surround

DISPLAY
VPS-511RF: Optional Screen with 1.7 mm screen
surround
PWK-411D: System Control Kit
(Including RM-PJ1292 Remote
Commander and installation manual)
PWB-411D: Video Input Board
PWR-B511A: Base Stand
PWR-P512A: Position Beam for dual mount
PWR-P513A: Position Beam for triple mount
RM-PJ10: Remote Control Receiver
RCC-1W2: 9-pin remote cable
(D-sub 9-pin M to D-sub 9-pin M for
RS-422)

Specifications 15 kHz: *Available when an optional PWB-411D Video Input

Board is inserted. See PWB-411D specifications.
Optical Control-S: Mini Jack (mono)
Projection System: 3 picture tubes, 3 lenses, rear projection Remote: RS-422: D-sub 9-pin connector (female)
Picture Tube: 7.7-inch (5.5-inch raster size) high-luminance Linked ABL: Mini Jack (mono)
monochrome optical coupled with sealed coolant Output:
Projection Lens: High performance lens, F1.1/77 mm Control-S: Mini Jack (mono)
Screen: Optional (See Optional Accessories) Remote: RS-422: D-sub 9-pin connector (female)
Light Output*2: ANSI*3: 125 cd/m2 (fH: 31.5 kHz, fV: 60Hz) Linked ABL: Mini Jack (mono)
Colour temperature: 6500°K
Peak white: 977 cd/m2 General
Power Supply: AC 200 to 240 V, 50/60 Hz
Electrical Power Consumption: 200 to 240 V, 1.4 A, 300 W
Scan Frequency: 31.25 kHz/50 Hz/1:1, 31.25 kHz/100 Hz/2:1 Dimensions (max.): 1018 (W) × 781 (H) × 1236 (D) mm
31.5 kHz/60 Hz/1:1, 31.5 kHz/120 Hz/2:1 (401⁄8 × 303⁄4 × 483⁄4 inches)
(Horizontal Frequency/Vertical Frequency/Interlace Mass: 88 kg (194 lb)
Ratio)
Resolution: 1000 × 580 dots (measured at RGB 31.25 kHz input)
RGB Bandwidth: 30 MHz (-3 dB)
Test Signal: Cross hair, Hatch (fine), Diagonal hatch, Circle
hatch, Dot pattern, H pattern, ME, Window, All white
(100 IRE), Black
Input: RGB: BNC × 5
31 kHz: R: 0.7 Vp-p ±2 dB, 75 Ω
G: 0.7 Vp-p ±2 dB, 75 Ω
G on sync: 1.0 Vp-p ±2 dB, 75 Ω,
sync negative
B: 0.7 Vp-p ±2 dB, 75 Ω
H sync/C sync:1.0 to 4.0 Vp-p, 75 Ω,
positive/negative
V sync: 1.0 to 4.0 Vp-p, 75 Ω,
positive/negative

*1 RM-PJ1292 is included in the system control kit PWK-411D.

*2 In the case of the RVP-511DMS with the VPS-511RF optional screen.
*3 ANSI lumens is a measuring method of the American National Standards Institute IT 7.215.

–151–
 2-2. Projection wall units

RVP-411DMS (PAL/NTSC/SECAM/NTSC 4.43)

•41-inch projection wall unit for various projection wall

applications •Light in weight (75 kg) and a short cabinet
depth (1044 mm) for easier handling and stacking •Input
capability: double scan video signals and computer signals
which conform to VGA mode 3 (31.469 kHz/59.94 Hz)
standard •Optional PWB-411D video input board available
for composite, Y/C, component and 15 kHz RGB video
signals •Double scan capability for flicker free signal
reproduction when using with the optional PWB-411D video
input board •Adopts optical coupling CRT for high contrast
image display •Colour temperature selection:
3200K/6500K/9300K/User preset (factory preset: 6500K)
•Two-part construction enables the CRT assembly, together
with the electronic chassis, to be easily separated from the
cabinet •Wide viewing angle: horizontal 160 degrees, vertical
60 degrees •Optional VPS-415RF/411RF screens with ultra-
thin screen surround are available •Optional CHP-411DM
projection wall chassis available for system versatility
•Optional wired/wireless remote control unit RM-PJ1292*1
with address function for all projector control functions,
including inputs selection, picture control, RGB size and shift
and centering controls
Supplied Accessories: AC power cord (1)
Remote control cable (1.2 m × 1)
Operation manual (1)
Optional Accessories: VPS-415RF: Optional Screen with 0.2 mm screen
PRODUCTS

surround
DISPLAY

VPS-411RF: Optional Screen with 0.2 mm screen

surround
PWK-411D: System Control Kit
(Including RM-PJ1292 Remote
Commander and installation manual)
PWB-411D: Video Input Board
PWR-B411A: Base Stand
PWR-P412A: Position Beam for dual mount
PWR-P413A: Position Beam for triple mount
RM-PJ10: Remote Control Receiver
RCC-1W2: 9-pin remote cable
(D-sub 9-pin M to D-sub 9-pin M for
RS-422)

Specifications 15 kHz: *Available when an optional PWB-411D Video Input

Board is inserted. See PWB-411D specifications.
Optical Control-S: Mini Jack (mono)
Projection System: 3 picture tubes, 3 lenses, rear projection Remote: RS-422: D-sub 9-pin connector (female)
Picture Tube: 7.7-inch (5.5-inch raster size) high-luminance Linked ABL: Mini Jack (mono)
monochrome optical coupled with sealed coolant Output:
Projection Lens: High performance lens, F1.1/77 mm Control-S: Mini Jack (mono)
Screen: Optional (See Optional Accessories) Remote: RS-422: D-sub 9-pin connector (female)
Light Output*2: ANSI*3: 280 cd/m2 (fH: 31.5 kHz, fV: 60 Hz) Linked ABL: Mini Jack (mono)
Colour temperature: 6500°K
Peak white: 2056 cd/m2 General
Power Supply: AC 200 to 240 V, 50/60 Hz
Electrical Power Consumption: 200 to 240 V, 1.4 A, 300 W
Scan Frequency: 31.25 kHz/50 Hz/1:1, 31.25 kHz/100 Hz/2:1 Dimensions (max.): 830 (W) × 641 (H) × 1044 (D) mm
31.5 kHz/60 Hz/1:1, 31.5 kHz/120 Hz/2:1 (323⁄4 × 251⁄4 × 411⁄8 inches)
(Horizontal Frequency/Vertical Frequency/Interlace Mass: 75 kg (165 lb 6 oz)
Ratio)
Resolution: 800 × 580 dots (measured at RGB 31.25 kHz input)
RGB Bandwidth: 30 MHz (-3 dB)
Test Signal: Cross hair, Hatch (fine), Diagonal hatch, Circle
hatch, Dot pattern, H pattern, ME, Window, All white
(100 IRE), Black
Input: RGB: BNC × 5
31 kHz: R: 0.7 Vp-p ±2 dB, 75 Ω
G: 0.7 Vp-p ±2 dB, 75 Ω
G on sync: 1.0 Vp-p ±2 dB, 75 Ω,
sync negative
B: 0.7 Vp-p ±2 dB, 75 Ω
H sync/C sync:1.0 to 4.0 Vp-p, 75 Ω,
positive/negative
V sync: 1.0 to 4.0 Vp-p, 75 Ω,
positive/negative

*1 RM-PJ1292 is included in the system control kit PWK-411D.

*2 In the case of the RVP-411DMS with the VPS-411RF optional screen.
*3 ANSI lumens is a measuring method of the American National Standards Institute IT 7.215.

–152–
2-3 Video projectors

VPH-V22M*1(PAL/NTSC/SECAM/NTSC 4.43)

•Remarkable light output of 700 lm(peak white) •Adopts high

quality performance HACC lens •Accepts Component (Y/R-
Y/B-Y or RGB), Y/C and Composite Video signals •A high
resolution of 700 TV lines (composite video)/1000 TV
lines(RGB) •Supplied remote control unit RM-PJV20 controls
all projector functions •Desk top mounted projection, ceiling
mounted projection, floor mounted projection and rear
projection capabilities •Can be used with a screen from 70 to
250 inches in size with simple adjustment
Supplied accessories: Remote commander RM-PJV20
AA size batteries (2)
AC power cord
Spacer for 508 cm (200-inch) front projection
Spacer (0.2 mm) for 254 cm (70 to 100-inch)
rear projection
Spacer (0.8 mm) for 254 cm (70 to 100-inch)
rear projection
Operating manual
Installation manual
Optional accessories: Signal interface cable SIC-10
Interface unit: IFU-1271M
Suspension support: PSS-722/10
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*1
120-inch flat screen VPS-120FH*1
70-inch rear screen VPS-702R

Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system

PRODUCTS
DISPLAY
CRT: 7-inch (Phosphor size: 5.5-inch) liquid cooled high SYNC/HD:
brightness monochrome tubes Composite sync: 0.6 to 8.0 Vp-p, high impedance negative
Projection lens: HACC (High-resolusion Aspherical and Colour Horizontal sync: 0.6 to 8.0 Vp-p, high impedance negative
Corrected) lens F1.0/135 mm VD:
Screen 70-inch (177.8 cm) to 250-inch (635 cm) measured Vertical sync: 0.6 to 8.0 Vp-p, high impedance negative
diagonally (Factory preset: 100-inch (254 cm)) Control S: Loop-through Stereo Mini Jack
Light output: ANSI*2 100 lm (15 kHz: 60Hz, 6500 K) Safety Regulations:
Peak white: 700 lm, All white: 140 lm EN60 065 (TÜV), CE, C-Tick, PTB
Throwing distance: 100-inch: 3301 mm (Approx. 11 ft)
200-inch: 6417 mm (Approx. 21 ft)
Signals
Colour system: PAL, NTSC, SECAM, NTSC4.43*3 automatically
selected
Resolution: 700 TV lines (Composite video input)
1000 TV lines (RGB input)
Test signals: Cross hair
General
Power requirements: 220 V AC to 240 V AC, 50/60 Hz
Power consumption: 210 W
Operating temperature: 0 to 40 °C (14 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 532 (W) × 288 (H) × 597 (D) mm
(21 × 111⁄8 × 235⁄8 inches)
Mass: Approx. 38 kg (83 lb 12 oz)
Heat dispersion: 716.6 BTU
Inputs/Outputs
VIDEO IN:
Video*4: BNC 1.0 Vp-p ±2 dB, sync negative, 75 Ω
S video*4: Mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB, sync negative, 75 Ω
C (chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75Ω
VIDEO OUT:
Video: BNC 1.0 Vp-p ±2 dB, 75 Ω
INPUT A:
Analogue RGB/Component:
BNC
R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
G: 0.7 Vp-p ±2 dB, positive, 75 Ω
G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω

*1 Some items are not available in some areas. For details, please consult your nearest Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT7.215.
*3 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 S VIDEO input has priority over Composite video input.

–153–
 2-3 Video projectors

VPH-V20M*1(PAL/NTSC/SECAM/NTSC 4.43)

•Remarkable light output of 700 lm(peak white) •Accepts

Component (Y/R-Y/B-Y or RGB), Y/C and Composite Video
signals •A high resolution of 700 TV lines (composite
video)/1000 TV lines(RGB) •Supplied remote control unit
RM-PJV20 controls all projector functions •Desk top mounted
projection, ceiling mounted projection, floor mounted
projection and rear projection capabilities •Can be used with
a screen from 70 to 250 inches in size with simple
adjustment
Supplied accessories: Remote commander RM-PJV20
AA size batteries (2)
AC power cord
Spacer for 508 cm (200-inch) front projection
Spacer (0.2 mm) for 254 cm (70 to 100-inch )
rear projection
Spacer (0.8 mm) for 254 cm (70 to 100-inch )
rear projection
Operating manual
Installation manual
Optional accessories: Signal interface cable SIC-10
Interface unit: IFU-1271M
Suspension support: PSS-722/10
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*1
120-inch flat screen VPS-120FH*1
70-inch rear screen VPS-702R

Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system SYNC/HD:
PRODUCTS
DISPLAY

CRT: 7-inch (Phosphor size: 5.5-inch) liquid cooled high Composite sync: 0.6 to 8.0 Vp-p, high impedance negative
brightness monochrome tubes Horizontal sync: 0.6 to 8.0 Vp-p, high impedance negative
Projection lens: High performance hybrid multi-coated lens VD:
F1.0/130 mm Vertical sync: 0.6 to 8.0 Vp-p, high impedance negative
Screen 70-inch (177.8 cm) to 250-inch (635 cm) measured Control S: Loop-through Stereo Mini Jack
diagonally (Factory preset: 100-inch (254 cm)) Safety Regulations:
Light output: ANSI*2 100 lm (15 kHz: 60 Hz, 6500 K) EN60 065 (TÜV), CE, C-Tick, PTB
Peak white: 700 lm, All white: 140 lm
Throwing distance: 100-inch (254 cm):3301 mm (Approx. 11 ft)
200-inch (508 cm):6417 mm (Approx. 21 ft)
Signals
Colour system: PAL, NTSC, SECAM, NTSC4.43*3 automatically
selected
Resolution: 700 TV lines (Composite video input)
1000 TV lines (RGB input)
Test signals: Cross hair
General
Power requirements: 220 V AC to 240 V AC, 50/60 Hz
Power consumption: 210 W
Operating temperature: 0 to 40 °C (14 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 532 (W) × 288 (H) × 597 (D) mm
(21 × 111⁄8 × 235⁄8 inches)
Mass: Approx. 30 kg (66 lb 2 oz)
Heat dispersion: 716.6 BTU
Inputs/Outputs
VIDEO IN:
Video*4: BNC 1.0 Vp-p ±2 dB, sync negative, 75 Ω
S video*4: Mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB, sync negative, 75 Ω
C (chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75Ω
VIDEO OUT:
Video: BNC 1.0 Vp-p ±2 dB, 75 Ω
INPUT A:
Analogue RGB/Component:
BNC
R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
G: 0.7 Vp-p ±2 dB, positive, 75 Ω
G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω

*1 Some items are not available in some areas. For details, please consult your nearest Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT7.215.
*3 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 S VIDEO input has priority over Composite video input.

–154–
2-4 LCD projectors

VPL-FE100E/FE100M (PAL/NTSC/SECAM/NTSC4.43/PAL-M)
LCD Data Projector
•SXGA resolution LCD (Liquid Crystal Display)-based data
projector •Three LCD panels for a total of 3,932,160 pixels
(1,310,720 pixels x 3 panels) •Four 120 W UHP lamps
•Outstanding light output of 3500 ANSI lumens*1 •Excellent
uniformity assured with 3D Digital gamma correction
•Exclusive Sony DRC (Digital Reality Creation) generates
video pictures with effectively four times the resolution of that
from a conventional video signal •Multiscan capability with a
built-in scan converter: fH: 15 to 100 kHz, fV:40 to 120 Hz
•Power zoom, power focus and picture shift functions for
installation flexibility •Graphical on-screen menus with a
choice of seven languages for adjustment/operation •Supplied
remote commander RM-PJ1001 controls all the projector
functions •Wide range of optional lenses available •Can be
used with screens from 40 to 500 inches in size •Power
saving mode available
Supplied accessories: Remote commander RM-PJ1001
Remote commander cable (15 m)
Size AA (R6) battery (3)
AC power cord
PJ COM terminator
Lens ring
Operation manual
Installation manual
Optional accessories: Projector quadruple lamp (for replacement) LMP-Q120 VPL-FE100E
Projector individual lamp LMP-S120
1.3 times zoom standard focus lens VPLL-Z3020
1.3 times zoom standard focus lens VPLL-Z2019
1.6 times zoom long focus lens VPLL-Z2025
1.5 times zoom long focus lens VPLL-Z2039
Fixed long focus lens VPLL-3050

PRODUCTS
DISPLAY
Fixed long focus lens VPLL-2075
Fixed short focus lens VPLL-2014
Fixed short focus lens VPLL-2009
Stack stand (for twin and triple stacking) SU-PJ2000
Suspension support PSS-2000
Suspension support PSS-10
Signal adaptor HD D-sub 15-pin to D-sub 9-pin
(for SIC Cable) ADP-10
Signal adaptor Macintosh® to VGA ADP-20
D-sub HD 15-pin to 5 BNC cable SMF-400 VPL-FE100M
D-sub HD 15-pin to D-sub HD 15-pin SMF-401
Interface board IFB-12A/21/50/1000/X2000E INPUT A
Signal interface cable SIC-20A/20C/22 Analogue RGB/Component:
Signal interface switcher PC-3000 BNC × 5
9-pin remote cable RCC-5G/10G/30G (for RS-422A) R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Remote commander RM-PJ3000S*2 G: 0.7 Vp-p ±2 dB positive, 75 Ω
Remote control receiver RM-PJ10 G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
100-inch flat screen VPS-100FH*3 B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
SYNC/HD
Composite sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
Specifications Horizontal sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
Optical VD
Projection system: 3 LCD panels, 1 lens projection Vertical sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
LCD panel: 1.8-inch TFT LCD panel, 3,932,160 pixels HDTV*5 (Y/PB/PR): BNC
(1,310,720 pixels x3) Y: 1.0 Vp-p ±2 dB positive, 75 Ω,
Lamp: 120 W UHP lamp (4) Tri-level sync: ±0.3 Vp-p
Light output: 3500 ANSI lumens*1 Bi-level sync: 0.3 Vp-p
Projection picture size: 40-inch to 500-inch PB/PR: ±0.35 Vp-p ±2 dB positive, 75 Ω
General 5
HDTV* (GBR): BNC
Colour system: PAL/NTSC/SECAM/NTSC4.43/PAL-M G with sync: 1.0 Vp-p ±2 dB, 75 Ω,
(automatically selected) Tri-level sync: ±0.3 Vp-p
Resolution: Video: 600 TV lines Bi-level sync: 0.3 Vp-p
RGB: 1280 x 1024 pixels B/R: 0.7 Vp-p ±2 dB positive, 75 Ω
Scanning frequency: fH: 15 kHz to 100 kHz Audio IN: Phono, stereo, 500 mV rms, impedance more than 47 kΩ
fV: 40 Hz to 120 Hz AUDIO OUT: Phono, Max. 1 V rms when input is 500 mV rms,
Display area: >6.4 µsec impedance more than 1 kΩ
Speaker: 5 W stereo INPUT B/C: Open for optional IFB board
Power requirements: AC 220 to 240 V, 50/60 Hz CONTROL S IN/ Stereo mini jack 5.0 Vp-p,
Power consumption: Max: 770 W (approx.), Standby: 20 W PLUG IN POWER: Plug in power DC 5 V maximum output 60 mA
Heat dissipation: 2628 BTU CONTROL S OUT: Stereo mini jack 5.0 Vp-p
Dimensions: 562 (W) × 237 (H) × 649 (D) mm REMOTE
(221⁄4 × 93⁄8 × 255⁄8 inches) RS-232C/RS-422A*6: D-sub 9-pin (female)
Mass: Approx. 34.5 kg (75 lb 14 oz) PJ COM*7: D-sub 9-pin (2) (female)
Operating temperature: 0 to 40 °C (32 to 104 °F) Trig: Mini jack
Operating humidity: 35 to 85% (no condensation) Power ON: 12 V, output impedance 4.7 kΩ
Storage temperature: -20 to 60 °C (-4 to 140 °F) Power OFF: 0 V
Storage humidity: 10 to 90%
Input/Output Safety Regulations: EN 60 950 (TÜV), CE, C-tick
VIDEO IN*4
Composite video: Loop-through BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω *1 ANSI lumens is a measuring method of the American National Standards Institute
S VIDEO IN*4 IT7.228.
Y IN: BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω *2 Laser Type: Class II
C IN: BNC 0.3 Vp-p ±2 dB (PAL), 75 Ω or Wavelength: 645 nm
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω Output: 1 mW
Y/C IN: Loop-through Mini DIN 4-pin *3 Not available in some areas. For details, please consult your nearest Sony office.
Y(luminance): 1.0 Vp-p ±2 dB sync negative, 75 Ω *4 With the optional IFB-X2000E installed in the VPL-FE100E.
C(chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or *5 The VPL-FE100E/FE100M supports 1125/60/2:1 and 1125/59.94/2:1
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω (SMPTE-240M/274M) HDTV systems.
AUDIO IN*4: Phono, stereo, 500 mV rms, impedance more than 47 kΩ *6 RS-232C/RS-422A selectable.
*7 PJ COM complies with RS-485.

–155–
 2-4 LCD projectors

VPL-FX200E/FX200M (PAL/NTSC/SECAM/NTSC 4.43 /PAL-M)

LCD Data Projector
•XGA resolution LCD (Liquid Crystal Display)-based data projector
•Three LCD panels for a total of 2,359,296 pixels (786,432 pixels x 3
panels) •Four 120 W UHP lamps •Outstanding light output of 3100
ANSI lumens*1 •Excellent uniformity assured with 3D Digital gamma
correction •Exclusive Sony DRC (Digital Reality Creation) generates
video pictures with effectively four times the resolution of that from a
conventional video signal •Multiscan capability with a built-in scan
converter: fH: 15 to 94 kHz, fV:50 to 120 Hz •Power zoom, power
focus and picture shift functions for installation flexibility •Graphical
on-screen menus with a choice of seven languages for
adjustment/operation •Supplied remote commander RM-PJ1001
controls all the projector functions •Six optional lenses available
•Can be used with screens from 40 to 500 inches in size •Power
saving mode available
Supplied accessories: Remote commander RM-PJ1001
Remote commander cable (15 m)
Size AA (R6) battery (3)
AC power cord
PJ COM terminator
Lens ring
Operation manual
Installation manual
Optional accessories: Projector quadruple lamp (for replacement) LMP-Q120
Projector individual lamp LMP-S120
1.3 times zoom standard focus lens VPLL-Z2019
1.6 times zoom long focus lens VPLL-Z2025
VPL-FX200E
1.5 times zoom long focus lens VPLL-Z2039
Fixed long focus lens VPLL-2075
Fixed short focus lens VPLL-2014
Fixed short focus lens VPLL-2009
Stack stand (for twin and triple stacking) SU-PJ2000
Suspension support PSS-2000
Suspension support PSS-10
PRODUCTS

Signal adaptor HD D-sub 15-pin to D-sub 9-pin

DISPLAY

(for SIC Cable) ADP-10

Signal adaptor Macintosh® to VGA ADP-20
D-sub HD 15-pin to 5 BNC cable SMF-400
D-sub HD 15-pin to D-sub HD 15-pin SMF-401
Interface board IFB-12A/21/30/1000/50/X2000E
Signal interface cable SIC-20A/20C/22
Signal interface switcher PC-3000
9-pin remote cable RCC-5G/10G/30G (for RS-422A)
Remote commander RM-PJ3000S*2 VPL-FX200M
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*3 C(chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Specifications AUDIO IN*4: Phono, stereo, 500 mV rms, impedance more than 47 kΩ
Optical INPUT A
Projection system: 3 LCD panels, 1 lens projection Analogue RGB/Component:
LCD panel: 1.8-inch TFT LCD panel, 2,359,296 pixels (786,432 pixels x3) BNC × 5
Lamp: 120 W UHP lamp (4) R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Light output: 3100 ANSI lumens*1 G: 0.7 Vp-p ±2 dB positive, 75 Ω
Projection picture size: 40-inch to 500-inch G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
Optional projection lenses: B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Throwing distance (unit: mm) SYNC/HD
40-inch 100-inch 300-inch Composite sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
VPLL-Z2019 Horizontal sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
1,490 - 1,890 3,870 - 4,880 11,820 - 14,840 VD
(1.3 times zoom lens)
VPLL-Z2025 Vertical sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
N.A. 5,020 - 7,750 15,430 - 23,580 HDTV*5 (Y/PB/PR): BNC
(1.6 times zoom lens)
VPLL-Z2039 Y: 1.0 Vp-p ±2 dB positive, 75 Ω,
N.A. 7,990 - 11,480 24,300 - 34,760 Tri-level sync: ±0.3 Vp-p
(1.5 times zoom lens)
VPLL-2075 Bi-level sync: 0.3 Vp-p
(fixed long focus lens)
N.A. 15,000 44,660 PB/PR: ±0.35 Vp-p ±2 dB positive, 75 Ω
VPLL-2014 HDTV*5 (GBR): BNC
(fixed short focus lens)
1,030 2,760 8,520 G with sync: 1.0 Vp-p ±2 dB, 75 Ω,
VPLL-2009 Tri-level sync: ±0.3 Vp-p
640 1,800 5,670 Bi-level sync: 0.3 Vp-p
(fixed short focus lens)
B/R: 0.7 Vp-p ±2 dB positive, 75 Ω
General Audio IN: Phono, stereo, 500 mV rms, impedance more than 47 kΩ
Colour system: PAL/NTSC/SECAM/NTSC4.43/PAL-M AUDIO OUT: Phono, Max. 1 V rms when input is 500 mV rms, impedance
(automatically selected) more than 1 kΩ
Resolution: Video: 600 TV lines INPUT B/C: Open for optional IFB board
RGB: 1024 x 768 pixels CONTROL S IN/ Stereo mini jack 5.0 Vp-p,
Scanning frequency: fH: 15 kHz to 94 kHz PLUG IN POWER: Plug in power DC 5 V maximum output 60 mA
fV: 50 Hz to 120 Hz CONTROL S OUT: Stereo mini jack 5.0 Vp-p
Display area: >6.4 µsec REMOTE
Speaker: 5 W stereo RS-232C/RS-422A*6: D-sub 9-pin (female)
Power requirements: AC 220 to 240 V, 50/60 Hz PJ COM*7: D-sub 9-pin (2) (female)
Power consumption: Max: 770 W (approx.), Standby: 20 W Trig: Mini jack
Heat dissipation: 2628 BTU Power ON: 12 V, output impedance 4.7 kΩ
Dimensions: 562 (W) × 237 (H) × 649 (D) mm (22 1⁄4 × 9 3⁄8 × 25 5⁄8 inches) Power OFF: 0 V
Mass: Approx. 34.5 kg (75 lb 14 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F) Safety Regulations: EN 60 950 (TÜV), CE, C-tick
Operating humidity: 35 to 85% (no condensation)
Storage temperature: -20 to 60 °C (-4 to 140 °F) *1 ANSI lumens is a measuring method of the American National Standards Institute
Storage humidity: 10 to 90% IT7.228.
Input/Output *2 Laser Type: Class II
VIDEO IN*4 Wavelength: 645 nm
Composite video: Loop-through BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω Output: 1 mW
S VIDEO IN*4 *3 Not available in some areas. For details, please consult your nearest Sony office.
Y IN: BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω *4 With the optional IFB-X2000E installed in the VPL-FX200E.
C IN: BNC 0.3 Vp-p ±2 dB (PAL), 75 Ω or *5 The VPL-FX200E/FX200M supports 1125/60/2:1 and 1125/59.94/2:1
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω (SMPTE-240M/274M) HDTV systems.
Y/C IN: Loop-through Mini DIN 4-pin *6 RS-232C/RS-422A selectable.
Y(luminance): 1.0 Vp-p ±2 dB sync negative, 75 Ω *7 PJ COM complies with RS-485.

–156–
2-4 LCD projectors

VPL-PX30 (PAL/NTSC/SECAM/NTSC 4.43/PAL-M/PAL-N)

LCD Data Projector

•XGA resolution LCD (Liquid Crystal Display)-based portable
presentation projector •Three TFT LCD panels for a total of
2,359,296 pixels (786,432 pixels x 3) •200 W UHP lamp incorporated
(LOW power mode selectable: 150 W) •Brightness of 2400 ANSI
lumens*1 •Advanced technologies including 3D Gamma Correction,
RGB Enhancer and Digital Keystone for outstanding picture quality
•Handles VGA, SVGA, XGA, SXGA*2 with a horizontal frequency of
15 to 91 kHz, composite video, Y/C video, component video and
DTV signals*3 •Wide range of input terminals (5 BNC, Monitor out,
RS-232C, Digital RGB DFP 20 pin) •USB hub function with
PROJECTOR STATION software, Advanced APA (Auto Pixel
Alignment) and Digital Zoom for enhanced presentations
•Lightweight, compact body •Seven-language on-screen display
•Remote commander with laser pointer and mouse control •Desktop,
ceiling and rear projection capabilities •Can be used with screens
from 40 to 300 inches in size •Built-in three-speaker stereo
Supplied accessories: Remote commander RM-PJM610, Monitor cable SMF-410 (2 m):
HD D-sub 15 pin to HD D-sub 15 pin, Mouse cable (2 m):
SIC-S21 (for Serial)/SIC-S22 (for PS/2), Audio visual cable
(1.5 m), USB cable (2 m): A type to B type, USB application
software PROJECTOR STATION, AA size battery (2), Lens
cap, Strap for remote commander, Air filter, Operating manual,
Quick reference sheet, Installation manual for dealers
Optional accessories: Projector lamp (for replacement) LMP-P200, Carrying case
VLC-600*4, Suspension support PSS-610, Monitor cables
SMF-400/410, Signal cable SMF-401, Digital signal cables
SMF-D102/D110, Mouse cables SIC-S20 for Mac®/SIC-S21
for Serial/SIC-S22 for PS/2, Macintosh® adaptor ADP-20
(Macintosh to VGA), 50-inch portable screen VPS-50C*4,
Optional lenses VPLL-FM21 (Fixed short focus lens)/

PRODUCTS
VPLL-ZM31 (Short focus zoom lens)/VPLL-ZM101 (Long

DISPLAY
focus zoom lens)

Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system SYNC/HD
LCD panel: 1.3-inch p-Si TFT SONY LCD panel 2,359,296 pixels Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
(786,432 pixels × 3) with Micro Lens Array Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Projection lens: Approx. 1.3 times zoom lens, F1.7 to 2.0, f 36.7 to 47.8 mm VD
Lamp: 200 W Ultra High Performance Lamp Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Screen coverage: 40 to 300 inches (measured diagonally) Analogue RGB/Component: 5 BNC (Female)
Light output: 2400 ANSI lumens*1 R/R-Y/PR: 0.7 Vp-p ±2 dB positive, 75 Ω
Throwing distance: G: 0.7 Vp-p ±2 dB positive, 75 Ω
40-inch: 1490 to 1820 mm (583⁄4 to 713⁄4 inches) G with Sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
60-inch: 2280 to 2780 mm (897⁄8 to 1091⁄2 inches) B/B-Y/PB: 0.7 Vp-p ±2 dB positive, 75 Ω
80-inch: 3060 to 3740 mm (1201⁄2 to 1471⁄4 inches) SYNC/HD
100-inch: 3850 to 4700 mm (1515⁄8 to 1851⁄8 inches) Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
120-inch: 4630 to 5660 mm (1823⁄4 to 2227⁄8 inches) Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
150-inch: 5810 to 7100 mm (2283⁄4 to 2795⁄8 inches) VD
200-inch: 7770 to 9500 mm (306 to 3741⁄8 inches) Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
300-inch: 11700 to 14300 mm (4603⁄4 to 563 inches) Digital RGB: DFP 20 pin (TMDS)
Signals USB HUB: Up (B type: Female) x 1, Down (A type: Female) x 1
Colour system: PAL/NTSC/SECAM/NTSC4.43/PAL-M/PAL-N MOUSE IN: Square 13 pin (Female)
(automatically/manually selected) AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than 47 kΩ
Resolution: Video: 750 TV lines, RGB: 1024 × 768 pixels INPUT B
Acceptable signals: RGB (fH: 15 to 91 kHz, fV: 43 to 85 Hz), Analog RGB: HD D-sub 15 pin (Female)
15 kHz component 50/60 Hz system, R: 0.7 Vp-p ±2 dB positive, 75 Ω
Progressive component 60 Hz system, G: 0.7 Vp-p ±2 dB positive, 75 Ω
DTV (480/60P, 575/50P, 1080/50I, 720/60P, 720/50P) G with Sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω
Composite video, Y/C video B: 0.7 Vp-p ±2 dB positive, 75 Ω
General SYNC/HD
Cabinet colour: Silky Silver / Turquoise Blue Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Speaker: Max. 5 W Wide frequency range 3 speakers Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Woofer: 65 mm (25⁄8 inches) diameter, Max. 3 W VD
Tweeter: 45 mm (13⁄16 inches) diameter, Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Max. 1 W × 2 (Stereo) MOUSE IN: Square 13 pin (Female)
Power requirements: 100 to 240 V, 50/60 Hz AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than 47 kΩ
Power consumption: Max. 290 W, STAND-BY 5 W, Power saving mode 50 W OUTPUT
Operating temperature: 0 to 40 °C (32 to 104 °F) MONITOR OUT*5: HD D-sub 15 pin (Female)
Operating humidity: 35 to 85% R/R-Y, G/Y, B/B-Y: Gain Unity, 75 Ω
Dimensions: 339 (W) × 142 (H) × 335 (D) mm SYNC/HD, VD: 4.0 Vp-p (open), 1.0 Vp-p (75 Ω)
(133⁄8 × 55⁄8 × 131⁄4 inches) AUDIO OUT: Stereo mini jack, Max. 1 V rms, when the input signal is
Mass: Approx. 7.2 kg (15 lb 14 oz) (Variable out) 500 mV rms, impedance less than 5 kΩ
Heat dissipation: 989.6 BTU REMOTE
Fan noise: Less than 34 dB (when lamp mode set to LOW: 30 dB) RS-232C: D-sub 9 pin (Female)
Inputs/Outputs CONTROL S IN/ Stereo mini jack
VIDEO PLUG IN POWER: 5.0 Vp-p, plug in power, DC 5 V
Composite: Phono type, 1.0 Vp-p ±2 dB sync negative, 75 Ω Safety regulations: UL1950, CSA No.950, DHHS (Laser), FCC Class A,
Y/C IN: Mini DIN 4-pin IC Class A, EN 60 950 (Nemko), CE, EN 60 825-1 (Laser),
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω C-Tick, CCIB, VCCI class B, JEIDA (Laser)
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or Laser beam
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω Laser type: Class II
INPUT A: HD D-sub 15 pin (Female) / 5 BNC (Female) / Digital Wavelength: 645 nm
Interface Switched Output: 1 mW
Analogue RGB: HD D-sub 15 pin (Female)
R: 0.7 Vp-p ±2 dB positive, 75 Ω *1 ANSI lumens is a measuring method of the American National Standards Institute IT7.228.
*2 Compressed SXGA signal is reproduced while maintaining the 5:4 aspect ratio.
G: 0.7 Vp-p ±2 dB positive, 75 Ω *3 The VPL-PX30 supports 480/60P, 575/50P, 1080/50I, 720/60P, and 720/50P DTV signals.
G with Sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω *4 Not available in some areas. For details, please consult your nearest Sony office.
B: 0.7 Vp-p ±2 dB positive, 75 Ω *5 DIGITAL RGB signal is not ouput from the MONITOR OUT terminal.

–157–
 2-4 LCD projectors

VPL-PX20 (PAL/NTSC/SECAM/NTSC 4.43/PAL-M/PAL-N)

LCD Data Projector

•XGA resolution LCD (Liquid Crystal Display)-based portable
presentation projector •Three TFT LCD panels for a total of
2,359,296 pixels (786,432 pixels x 3) •200 W UHP lamp incorporated
(LOW power mode selectable: 150 W) •Brightness of 1400 ANSI
lumens*1 •Advanced technologies including 3D Gamma Correction,
RGB Enhancer and Digital Keystone for outstanding picture quality
•Handles VGA, SVGA, XGA, SXGA*2 with a horizontal frequency of
15 to 91 kHz, composite video, Y/C video, component video and
DTV signals*3 •Wide range of input terminals (5 BNC, Monitor out,
RS-232C, Digital RGB DFP 20 pin) •USB hub function with
PROJECTOR STATION software, Advanced APA (Auto Pixel
Alignment) and Digital Zoom for enhanced presentations
•Lightweight, compact body •Seven-language on-screen display
•Remote commander with laser pointer and mouse control •Desktop,
ceiling and rear projection capabilities •Can be used with screens
from 40 to 300 inches in size •Built-in three-speaker stereo
Supplied accessories: Remote commander RM-PJM610, Monitor cable SMF-410 (2 m):
HD D-sub 15 pin to HD D-sub 15 pin, Mouse cable (2 m):
SIC-S21 (for Serial)/SIC-S22 (for PS/2), Audio visual cable
(1.5 m), USB cable (2 m): A type to B type, USB application
software PROJECTOR STATION, AA size battery (2), Lens
cap, Strap for remote commander, Air filter, Operating manual,
Quick reference sheet, Installation manual for dealers
Optional accessories: Projector lamp (for replacement) LMP-P200, Carrying case
VLC-600*4, Suspension support PSS-610, Monitor cables
SMF-400/410, Signal cable SMF-401, Digital signal cables
SMF-D102/D110, Mouse cables SIC-S20 for Mac®/SIC-S21
for Serial/SIC-S22 for PS/2, Macintosh® adaptor ADP-20
(Macintosh to VGA), 50-inch portable screen VPS-50C*4,
Optional lenses VPLL-FM21 (Fixed short focus lens)/
PRODUCTS

VPLL-ZM31 (Short focus zoom lens)/VPLL-ZM101 (Long

DISPLAY

focus zoom lens)

Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system SYNC/HD
LCD panel: 1.3-inch p-Si TFT SONY LCD panel 2,359,296 pixels Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
(786,432 pixels × 3) Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Projection lens: Approx. 1.3 times zoom lens, F1.7 to 2.0, f 36.7 to 47.8 mm VD
Lamp: 200 W Ultra High Performance Lamp Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Screen coverage: 40 to 300 inches (measured diagonally) Analogue RGB/Component: 5 BNC (Female)
Light output: 1400 ANSI lumens*1 R/R-Y/PR: 0.7 Vp-p ±2 dB positive, 75 Ω
Throwing distance: G: 0.7 Vp-p ±2 dB positive, 75 Ω
40-inch: 1490 to 1820 mm (583⁄4 to 713⁄4 inches) G with Sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
60-inch: 2280 to 2780 mm (897⁄8 to 1091⁄2 inches) B/B-Y/PB: 0.7 Vp-p ±2 dB positive, 75 Ω
80-inch: 3060 to 3740 mm (1201⁄2 to 1471⁄4 inches) SYNC/HD
100-inch: 3850 to 4700 mm (1515⁄8 to 1851⁄8 inches) Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
120-inch: 4630 to 5660 mm (1823⁄4 to 2227⁄8 inches) Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
150-inch: 5810 to 7100 mm (2283⁄4 to 2795⁄8 inches) VD
200-inch: 7770 to 9500 mm (306 to 3741⁄8 inches) Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
300-inch: 11700 to 14300 mm (4603⁄4 to 563 inches) Digital RGB: DFP 20 pin (TMDS)
Signals USB HUB: Up (B type: Female) x 1, Down (A type: Female) x 1
Colour system: PAL/NTSC/SECAM/NTSC4.43/PAL-M/PAL-N MOUSE IN: Square 13 pin (Female)
(automatically/manually selected) AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than 47 kΩ
Resolution: Video: 750 TV lines, RGB: 1024 × 768 pixels INPUT B
Acceptable signals: RGB (fH 15 to 91 kHz, fV: 43 to 85 Hz), Analog RGB: HD D-sub 15 pin (Female)
15 kHz component 50/60 Hz system, R: 0.7 Vp-p ±2 dB positive, 75 Ω
Progressive component 60 Hz system, G: 0.7 Vp-p ±2 dB positive, 75 Ω
DTV (480/60P, 575/50P, 1080/50I, 720/60P, 720/50P) G with Sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω
Composite video, Y/C video B: 0.7 Vp-p ±2 dB positive, 75 Ω
General SYNC/HD
Cabinet colour: Silky Silver / Turquoise Blue Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Speaker: Max. 5 W Wide frequency range 3 speakers Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Woofer: 65 mm (25⁄8 inches) diameter, Max. 3 W VD
Tweeter: 45 mm (13⁄16 inches) diameter, Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Max. 1 W × 2 (Stereo) MOUSE IN: Square 13 pin (Female)
Power requirements: 100 to 240 V, 50/60 Hz AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than 47 kΩ
Power consumption: Max. 290 W, STAND-BY 5 W, Power saving mode 50 W OUTPUT
Operating temperature: 0 to 40 °C (32 to 104 °F) MONITOR OUT*5: HD D-sub 15 pin (Female)
Operating humidity: 35 to 85% R/R-Y, G/Y, B/B-Y: Gain Unity, 75 Ω
Dimensions: 339 (W) × 142 (H) × 335 (D) mm SYNC/HD, VD: 4.0 Vp-p (open), 1.0 Vp-p (75 Ω)
(13 3⁄8 × 5 5⁄8 × 13 1⁄4 inches) AUDIO OUT: Stereo mini jack, Max. 1 V rms, when the input signal is
Mass: Approx. 7.2 kg (15 lb 14 oz) (Variable out) 500 mV rms, impedance less than 5 kΩ
Heat dissipation: 989.6 BTU REMOTE
Fan noise: Less than 34 dB (when lamp mode set to LOW: 30 dB) RS-232C: D-sub 9 pin (Female)
Inputs/Outputs CONTROL S IN/ Stereo mini jack
VIDEO PLUG IN POWER: 5.0 Vp-p, plug in power, DC 5 V
Composite: Phono type, 1.0 Vp-p ±2 dB sync negative, 75 Ω Safety regulations: UL1950, CSA No.950, DHHS (Laser), FCC Class A,
Y/C IN: Mini DIN 4-pin IC Class A, EN 60 950 (Nemko), CE, EN 60 825-1 (Laser),
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω C-Tick, CCIB, VCCI class B, JEIDA (Laser)
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or Laser beam
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω Laser type: Class II
INPUT A: HD D-sub 15 pin (Female) / 5 BNC (Female) / Digital Wavelength: 645 nm
Interface Switched Output: 1 mW
Analogue RGB: HD D-sub 15 pin (Female)
R: 0.7 Vp-p ±2 dB positive, 75 Ω *1 ANSI lumens is a measuring method of the American National Standards Institute IT7.228.
*2 Compressed SXGA signal is reproduced while maintaining the 5:4 aspect ratio.
G: 0.7 Vp-p ±2 dB positive, 75 Ω *3 The VPL-PX30 supports 480/60P, 575/50P, 1080/50I, 720/60P, and 720/50P DTV signals.
G with Sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω *4 Not available in some areas. For details, please consult your nearest Sony office.
B: 0.7 Vp-p ±2 dB positive, 75 Ω *5 DIGITAL RGB signal is not ouput from the MONITOR OUT terminal.

–158–
2-4 LCD projectors

VPL-S900E/S900M (PAL/NTSC/SECAM/NTSC4.43/PAL-M)
LCD Data Projector
•SVGA resolution LCD (Liquid Crystal Display)-based
portable presentation projector •Three TFT LCD panels for a
total of 1,440,000 pixels (480,000 × 3 panels) •120 W UHP
lamp incorporated •A remarkable high output of 1100 ANSI
lumens*1 •Excellent uniformity and accurate colour
reproduction assured with advanced technologies including
bilinear interpolation •Handles VGA, SVGA, XGA*2, SXGA*2
with a horizontal frequency of 15 to 91 kHz, composite video,
Y/C video and component video signals •Unique APA (Auto
Pixel Alignment) function •Lightweight, compact magnesium
diecast body •Seven language on-screen display •Grip-
contoured remote commander RM-PJM600 with laser pointer
and mouse control function •Desk top or ceiling mounted
projection capabilities •Can be used with screens from 40 to
300 inches in size •Built-in three-speaker stereo
Supplied accessories: Remote commander RM-PJM600
HD D-sub 15-pin to HD D-sub 15-pin cable SMF-401
Macintosh adaptor (1)
Mouse cables (2 m) SIC-S20/S21/S22
Audio visual cable (1.5 m)
Size AA battery (2)
Front cover VPL-S900E VPL-S900M
Lens cap
Strap for remote commander
Air filter
AC power cord
Operating manual

PRODUCTS
Quick reference sheet

DISPLAY
Installation manual Power consumption: Max. 220 W, standby 2 W
Optional accessories: Projector lamp (for replacement) LMP-600*3 Heat dissipation: 750.7 BTU
Suspension support PSS-600 Dimensions: 339 (W) × 136 (H) × 322 (D) mm
Carrying case VLC-600*3 (133⁄8 × 53⁄8 × 123⁄4 inches)
Remote control receiver RM-PJ10 Mass: Approx. 5.9 kg (13 lb)
D-sub HD 15-pin to 5 BNC cable SMF-400 Operating temperature: 0 to 40 °C (32 to 104 °F)
D-sub HD 15-pin to D-sub HD 15-pin cable SMF-401 Operating humidity: 35 to 85%
D-sub HD 15-pin to Phono (3) cable SMF-402 Input/Output
Mouse cable SIC-S20/S21/S22 VIDEO IN*4:
2 times zoom lens VPLL-ZM100 Composite video: Phono type × 1, 1.0 Vp-p ±2 dB sync negative, 75 Ω
Fixed short focus lens VPLL-FM30 S video: Mini DIN 4-pin
Fixed short focus lens VPLL-FM20 Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
120-inch flat screen VPS-120FH*3 C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
100-inch flat screen VPS-100FH*3 Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
80-inch portable screen VPS-80C*3 AUDIO IN: Phono type × 2 (stereo), 500 mV rms, impedance
Specifications more than 47 kΩ
Optical INPUT A/B:
Projection system: 3 LCD panels, 1 lens projection system Analogue RGB/Component:
LCD panel: 1.3-inch p-Si TFT LCD panel with Metal Mask, HD D-sub 15-pin (Female)
1,440,000 pixels (480,000 pixels x 3) R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Projection lens: 1.3 times zoom lens, F 2.0 to 2.4, f 54 to 70 mm G: 0.7 Vp-p ±2 dB positive, 75 Ω
Lamp: 120 W UHP G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
Screen coverage: 40 to 300 inches (viewable area, measured B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
diagonally) SYNC: HD D-sub 15-pin (Female)
Light output: 1100 ANSI lumens*1 C sync/HD:
Throwing distance: Composite sync:
40-inch: 1570 to 2000 mm (617⁄8 to 783⁄4 inches) 1.0 to 5.0 Vp-p high impedance, sync positive/negative
60-inch: 2400 to 3040 mm (941⁄2 to 1193⁄4 inches) Horizontal sync: 1.0 to 5.0 Vp-p high impedance, sync positive/negative
80-inch: 3240 to 4090 mm (1275⁄8 to 1611⁄8 inches) VD:
100-inch: 4070 to 5130 mm (1603⁄8 to 202 inches) Vertical sync: 1.0 to 5.0 Vp-p high impedance, sync positive/negative
120-inch: 4900 to 6180 mm (193 to 2433⁄8 inches) MOUSE IN: Square 13-pin (Female)
200-inch: 8240 to 10360 mm (3241⁄2 to 408 inches) AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than
300-inch: 12410 to 15580 mm (4883⁄4 to 6131⁄2 inches) 47 kΩ
General INPUT B:
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M Monitor out: HD D-sub 15-pin (Female)
(automatically/manually selected) Video signal: Gain unity
Resolution: Video: 600 TV lines, RGB: 800 × 600 pixels Sync signal: 4.0 Vp-p, high impedance/1.0 Vp-p, 75 Ω
Acceptable signals: RGB (fH: 15 to 91 kHz, fV: 43 to 85 Hz), 15 kHz AUDIO OUT (variable out)
component 50/60 Hz system, composite video, Stereo mini jack, max. 1 V rms, when an output signal
Y/C video is 500 mV rms, impedance less than 5 kΩ
Speaker: Wide frequency range 3 speakers system Laser beam
(Woofer: 57 mm (21⁄4 inches) diameter, Max. 1 W, Laser type: Class II
Tweeter: 28 mm (11⁄8 inches) diameter, Max. 0.2 W × 2) Wavelength: 645 nm
Power requirements: AC 220 to 240 V, 50/60 Hz Output: 1 mW
(CE listed for 220 to 240 V AC operation) Safety regulations: EN 60 950, CE, C-Tick, EN 60 825-1 (Laser)

*1 ANSI lumens is a measuring method of the American National Standards Institute IT 7.228.
*2 Compressed XGA and SXGA signals are reproduced.
*3 Not available in some areas. For details, please consult your nearest Sony office.
*4 The VPL-S900E requires the installation of the IFB-X600E for video image reproduction.

–159–
 2-4 LCD projectors

VPL-PX1 (PAL/NTSC/SECAM/NTSC4.43/PAL-M)
LCD Data Projector
•XGA resolution LCD (Liquid Crystal Display)-based data
projector •Three 0.9-inch LCD panels for a total of 2,359,296
pixels (786,432 pixels × 3 panels) •120 W UHP lamp •High
light output of 1000 ANSI lumens*1 •Excellent uniformity and
accurate colour reproduction assured with advanced
technologies •Built-in zoom lens •Accepts VGA, SVGA, XGA
and SXGA*2 with a horizontal frequency of 15, 24 to 91 kHz
•Lightweight at approx. 4.0 kg •On-screen menus with a
choice of seven languages for adjustment/operation •Supplied
remote commander RM-PJM600 controls all the projector
functions •Mouse function operation for remote control of the
connected computer source •Can be used with screens from
40 to 200 inches in size •Built-in stereo speakers
Supplied accessories: Remote commander RM-PJM600
HD D-sub 15-pin to HD D-sub 15-pin cable (2 m)
SMF-410
Mouse cable (2 m) SIC-S22
Audio-visual cable (1.5 m)
AA size battery (2)
Air filter
Operating manual
Quick reference sheet

Optional accessories: Projector lamp (for replacement) LMP-P120

Carrying case VLC-SC50*3
Interface selector IFU-SC50
HD D-sub 15-pin to 5 BNC cable SMF-400
PRODUCTS

HD D-sub 15-pin to HD D-sub 15-pin cable SMF-401

DISPLAY

HD D-sub 15-pin to RCA PIN x 3 cable SMF-402

Mouse cable SIC-S20/S21/S22
Macintosh® adaptor ADP-20
Signal adaptor ADP-10
80-inch portable screen VPS-80C*3
50-inch portable screen VPS-50C*3

Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system
LCD panel: 0.9-inch p-Si TFT LCD panel with Micro Lens Array,
2,359,296 pixels (786,432 pixels × 3)
Projection lens: 1.3 times zoom lens, F 1.7 to 2.0, f 37.3 to 48.5 mm
Lamp: 120 W plus UHP
Screen coverage: 40 to 200 inches (viewable area, measured Input/Output
diagonally) VIDEO IN:
Light output: 1000 ANSI lumens*1 Composite: Phono type, 1.0 Vp-p ±2 dB, sync negative, 75 Ω
Throwing distance: Y/C IN: Mini DIN 4-pin
40-inch: 1590 to 2040 mm (63 to 80 inches) Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
60-inch: 2440 to 3100 mm (96 to 122 inches) C: Burst 0.3 Vp-p ±2 dB (PAL), 75 Ω
80-inch: 3280 to 4160 mm (129 to 164 inches) or 0.286 Vp-p ±2 dB (NTSC), 75 Ω
100-inch: 4120 to 5220 mm (162 to 206 inches) INPUT A:
120-inch: 4970 to 6280 mm (196 to 247 inches) Analogue RGB/Component:
150-inch: 6230 to 7870 mm (245 to 310 inches) HD D-sub 15-pin (Female)
200-inch: 8340 to 10520 mm (328 to 414 inches) R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
General G: 0.7 Vp-p ±2 dB, positive, 75 Ω
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
(automatically/manually selected) B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
Resolution: 750 TV lines (video), 1024 × 768 pixels (RGB) SYNC/HD:
Acceptable signals: RGB (fH: 15, 24 to 91 kHz, fV: 50 to 85 Hz), Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
15 kHz component 50/60 Hz system, composite Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
video, Y/C video VD:
Speaker: Max. 1 W × 2 (stereo) Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Power requirements: AC 100 to 240 V, 50/60 Hz MOUSE IN: Square13-pin (Female)
Power consumption: Max. 190 W, standby 2 W AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than
Heat dissipation: 648.4 BTU 47 kΩ
Dimensions: 108 (W) × 223 (H) × 337 (D) mm AUDIO OUT (variable out):
(43⁄8 × 87⁄8 × 133⁄8 inches) Stereo mini jack, max. 1 V rms, when the input signal
Mass: Approx. 4 kg (8 lb 13 oz) is 500 mV rms, impedance less than 5 kΩ
Operating temperature: 0 to 40 °C (32 to 104 °F) Laser beam
Operating humidity: 35 to 85% Laser type: Class II
Wavelength: 645 nm
Output: 1 mW
Safety regulations
UL 1950, cUL 950 (CSA No.950), DHHS (Laser),
FCC Class A, IC Class A, EN 60 950 (TÜV), CE,
C-Tick, EN 60 825-1 (Laser)

*1 ANSI lumens is a measuring method of the American National Standards Institute IT7.228.
*2 Compressed SXGA signal is reproduced while preserving the detail of the image.
*3 Not available in some areas. For details, please consult your nearest Sony office.

–160–
2-4 LCD projectors

VPL-CS1 (PAL/NTSC/SECAM/NTSC4.43/PAL-M)
LCD Data Projector
•LCD (Liquid Crystal Display)-based projector •Three
0.7-inch SVGA LCD Panels for a total of 1,440,000 pixels
(480,000 pixels x 3 panels) •120 W UHP lamp •Light output
of 600 ANSI lumens*1 •Excellent uniformity and accurate
colour reproduction assured with advanced technologies
•Built-in 1.3 times zoom lens •Accepts VGA, SVGA, XGA
and SXGA with a horizontal frequency of 15, 24 to 91 kHz
•Extremely compact and lightweight at 2.9 kg •On-screen
menus with a choice of seven languages for adjustment/
operation •Supplied remote commander RM-PJM1 controls
all the projector functions •Mouse function operation for
remote control of the connected computer source •Can be
used with screens from 40 to 150 inches in size •Built-in
stereo speakers
Supplied accessories: Remote commander RM-PJM1
HD D-sub 15-pin to HD D-sub 15-pin cable (2 m)
SMF-410
PS/2 mouse cable (2 m)
USB cable A type to B type
USB application software PROJECTOR STATION
Carrying bag
AAA size battery (2)
Air filter
Operating manual
Quick reference sheet

Optional accessories: Projector lamp (for replacement) LMP-C120

PRODUCTS
Monitor cable SMF-400/410

DISPLAY
Signal cable SMF-402
Macintosh® adaptor ADP-20: Macintosh to VGA
50-inch portable screen VPS-50C*2

Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system
LCD panel: 0.7-inch p-Si TFT LCD panel, INPUT A:
1,440,000 pixels (480,000 pixels x 3) Analogue RGB/
Lamp: 120 W UHP Component: HD D-sub 15-pin (Female)
Screen coverage: 40 to 150 inches (viewable area, measured R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
diagonally) G: 0.7 Vp-p ±2 dB, positive, 75 Ω
Light output: 600 ANSI lumens*1 G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
Throwing distance B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
40-inch: 1580 to 2010 mm (621⁄4 to 7825⁄32 inches) SYNC/HD:
60-inch: 2390 to 3060 mm (941⁄8 to 1201⁄2 inches) Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
80-inch: 3210 to 4100 mm (126 1⁄2 to 1611⁄2 inches) Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
100-inch: 4030 to 5150 mm (15811⁄16 to 2027⁄8 inches) VD:
120-inch: 4850 to 6200 mm (191 to 2441⁄8 inches) Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
150-inch: 6080 to 7780 mm (2391⁄2 to 3063⁄8 inches) MOUSE IN: 6-pin (Female)
Signals USB HUB: UP (B type female), Down (A type Female)
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M, PAL-N AUDIO IN: Stereo mini jack, 500 mV rms, impedance more than
(automatically/manually selected) 47 kΩ
Resolution: 600 TV lines (video), 800 × 600 pixels (RGB) Safety regulations
Acceptable signals: RGB (fH: 15 to 91 kHz, fV: 43 to 85 Hz), UL1950, CSA No.950, FCC Class A, IC Class A,
15 kHz component 50/60 Hz system, composite EN 60 950 (Nemko), CE, C-Tick, CCIB,
video, Y/C video VCCI Class B
General
Speaker: Max. 0.5 W x 2 (stereo)
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: Max. 190 W, standby 4.2 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Operating humidity: 35 to 85%
Dimensions: 277 (W) × 70 (H) × 214 (D) mm
(11 × 27⁄8 × 81⁄2 inches)
Mass: Approx. 2.9 kg (6 lb 6 oz)
Heat dissipation: 648.4 BTU
Inputs/Outputs
VIDEO IN:
Composite: Phono type, 1.0 Vp-p ±2 dB, sync negative, 75 Ω
Y/C IN: Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω

*1 ANSI lumens is a measuring method of the American National Standards Institute IT7.228.
*2 Not available in some areas. For details, please consult your nearest Sony office.

–161–
 2-4 LCD projectors

VPL-VW10HT (PAL/NTSC/SECAM/NTSC4.43/PAL-M/PAL-N)
LCD Video Projector
•LCD (Liquid Crystal Display)-based projector designed for a
home theatre •Three wide-XGA (1366 x 768 pixels) LCD
panels •200 W UHP lamp •Light output of 1000 ANSI
lumens*1 (In the “normal” mode, 16:9 aspect) •Superb picture
quality with Digital Reality Creation - Multi Function, 3D
gamma correction and 3D*2/3-line YC separation/DNR circuit
•Cinema black mode •Video memory •Through mode for one
to one mapping •Low fan noise •White cabinet •Short
throwing distance •RGB input acceptable •Remote control
unit RM-PJVW10 supplied
Supplied accessories: Remote control unit RM-PJVW10
AA size battery (2)
Air filter
Operating manual

Optional accessories: Projector lamp (for replacement) LMP-P200

Projector suspension support PSS-610
HD D-sub 15-pin to 5 BNC cable SMF-400
Macintosh® adaptor ADP-20: Macintosh to VGA

Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system
LCD panel: 1.35-inch p-Si TFT LCD panel,
3,147,264 pixels (1,049,088 pixels x 3)
Projection lens: 1.2 times zoom lens, F 2.2 to 2.5, f 44.6 to 53.6 mm
Lamp: 200 W UHP
Screen coverage: 40 to 300 inches (16:9, viewable area, measured
PRODUCTS
DISPLAY

diagonally)
Light output: 1000 ANSI lumens*1 (16:9), 750 ANSI lumens (4:3)
Throwing distance:
<16:9>
40-inch: 1260 to 1470 mm (495⁄8 to 57 inches)
60-inch: 1930 to 2240 mm (76 to 881⁄4 inches) Inputs/Outputs
80-inch: 2600 to 3010 mm (1023⁄8 to 1185⁄32 inches) VIDEO IN:
100-inch: 3270 to 3780 mm (1287⁄8 to 1487⁄8 inches) Composite: Phono type, 1.0 Vp-p ±2 dB sync negative, 75 Ω
120-inch: 3930 to 4550 mm (1543⁄4 to 1791⁄4 inches) Y/C IN: Mini DIN 4-pin
150-inch: 4940 to 5710 mm (1945⁄8 to 2247⁄8 inches) Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
180-inch: 5940 to 6860 mm (234 to 2701⁄8 inches) C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
200-inch: 6610 to 7630 mm (2603⁄8 to 3001⁄2 inches) Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
250-inch: 8270 to 9560 mm (3253⁄4 to 3761⁄2 inches) INPUT A/B:
300-inch: 9940 to 11480 mm (3911⁄2 to 4521⁄8 inches) Component/Progressive:
<4:3> Phono type
40-inch: 1560 to 1820 mm (611⁄2 to 713⁄4 inches) Component/YPBPR/
60-inch: 2380 to 2760 mm (933⁄4 to 1083⁄4 inches) Analogue RGB:
80-inch: 3200 to 3700 mm (126 to 1453⁄4 inches) G: 0.7 Vp-p ±2 dB positive, 75 Ω
100-inch: 4020 to 4650 mm (1585⁄16 to 1831⁄8 inches) G with sync /Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
120-inch: 4830 to 5590 mm (1901⁄4 to 2201⁄8 inches) B/CB/PB: 0.7 Vp-p ±2 dB positive, 75 Ω
150-inch: 6060 to 7000 mm (2385⁄8 to 2755⁄8 inches) R/CR/PR: 0.7 Vp-p ±2 dB positive, 75 Ω
180-inch: 7290 to 8420 mm (2871⁄8 to 3315⁄8 inches) SYNC/HD:
200-inch: 8100 to 9360 mm (319 to 3685⁄8 inches) Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
250-inch: 10150 to 11720 mm (3993⁄4 to 4611⁄2 inches) Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
300-inch: 12190 to 14070 mm (480 to 5541⁄8 inches) VD:
Signals Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M, PAL-N CONTROL S IN/
(automatically/manually selected) PLUG IN POWER: Stereo mini jack 5.0 Vp-p
Resolution: 750 TV lines (video), 1100 TV lines (HD), Plug in power DC 5 V
1366 x 768 pixels (RGB) TRIGGER: Mini jack
Acceptable signals: DTV (480i, 480p, 720p, 1080i), progressive Power on: DC 12 V, output impedance: 4.7 kΩ
component, 15 kHz component 50/60 Hz system, Power off: 0V
composite video, Y/C video, RGB (fH: 15 to 91 kHz, REMOTE (RS-232 C): D-sub 9-pin (Female)
fV: 50 to 85 Hz) Safety regulations
General UL, cUL (CSA), FCC Class B, IC Class B,
Power requirements: AC 100 to 240 V, 50/60 Hz EN 60 950 (Nemko), CE, C-Tick,
Power consumption: Max. 300 W, standby 6 W VCCI class B, JEIDA
Heat dissipation: 1023.7 BTU
Dimensions: 395 (W) × 168 (H) × 427 (D) mm
(155⁄8 × 65⁄8 × 167⁄8 inches)
Mass: Approx. 8 kg (17 lb 10 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%

*1 ANSI lumens is a measuring method of the American National Standards Institute IT 7.228.
*2 This function is only applicable to NTSC signals.

–162–
2-5 Data projector

VPD-LE100 (PAL/NTSC/ SECAM/NTSC4.43/PAL-M)

•Multiscan projector with DLP™ (Digital Light Processing™)
technology •Outstanding brightness of 10000 ANSI lumens*1
•Three SXGA DMD™ (Digital Micromirror Device™) panels
for a total of 3,932,160 pixels (1,310,720 x 3 panels) •Multi-
scan capability with a built-in scan converter: horizontal 15 to
100 kHz, vertical 40 to 120 Hz •HDTV/DTV compatibility
•Sony Digital Reality Creation as standard while 2-3 pull
down FILM mode selected (Applicable for 525/60 system
only) •Power zoom and power focus •Excellent uniformity
•Horizontal and vertical power lens shift function •Superb
colour reproduction with a Xenon lamp •A wide range of
optional lenses covering various installation demands
•Optional IFB boards available including 4:2:2 SDI and HD
SDI board •Can be used with screens from 70 to 700 inches
in size
Supplied accessories: Remote commander RM-PJ1001
Remote commander cable (15 m)
AA size battery (3)
AC power cord
PJ COM termination
Lens ring
Operating manual
Installation manual
Optional accessories: 1.3 times zoom lens VPDL-Z1014
1.2 times zoom lens VPDL-Z1019
1.6 times zoom lens VPDL-Z1023
1.8 times zoom lens VPDL-Z1037
Projector lamp (for replacement) LMP-L2000

PRODUCTS
Signal adaptor HD D-sub 15-pin to D-sub 9-pin (for

DISPLAY
SIC Cable) ADP-10
Signal adaptor Macintosh® to VGA adaptor ADP-20
D-sub HD 15-pin to 5 BNC cable SMF-400
D-sub HD 15-pin to D-sub HD 15-pin SMF-401
Interface board IFB-12A/20/21/30/1000/50/LE100
Signal interface cable SIC-20A/20B/20C/21/22
Signal interface switcher PC-3000
9 pin remote cable RCC-5G/10G/30G (for RS-422A)
Remote commander RM-PJ3000S
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*2 Inputs/Outputs
120-inch flat screen VPS-120FH*2 Input A:
Analogue RGB/
Component: BNC x 5
Specifications
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Optical
G: 0.7 Vp-p ±2 dB positive, 75 Ω
Projection system: 3 SXGA DMD panels, 3 panel prism colour
Y/G with sync: 1.0 Vp-p V ±2 dB sync negative, 75 Ω
integration system
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
DMD panel: 3,932,160 pixels (1,310,720 × 3 panels)
SYNC/HD
Lamp: Xenon lamp
Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync
Light output: 10000 ANSI lumens*1
positive/negative
Screen coverage: 70 to 700 inches
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync
positive/negative
General
Vertical sync: 0.6 to 8.0 Vp-p high impedance, sync
Colour system: PAL/NTSC/SECAM/NTSC4.43/PAL-M automatically
positive/negative
selected (with optional IFB board; either
STV/HDVS (Y/PB/PR): BNC
IFB-12A/1000 incorporated)
Y: 1.0 Vp-p ±2 dB positive, 75 Ω
Resolution: 600 TV lines (video)
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
1280 x 1024 pixels (RGB)
PB/PR: ±0.35 Vp-p ±2 dB positive, 75 Ω
Scanning frequency: Horizontal: 15 kHz to 100 kHz
DTV/HDVS (GBR): BNC
Vertical: 40 Hz to 120 Hz
G with sync: 1.0 Vp-p ±2 dB, 75 Ω
Display area: >6.4 usec
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
Power requirements: AC 220 to 240 V, 50/60 Hz
B/R: 0.7 Vp-p ±2 dB positive, 75 Ω
Power consumption: Approx. 2.8 kW, Standby: approx. 40 W
Input B/C: Open for optional IFB board
Heat dissipation: 9556 BTU
Input D: Open for optional IFB-LE100
Operating temperature: 10 to 35 °C (50 to 104 °F)
CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
Operating humidity: 35 to 85% (No condensation)
PLUG IN POWER: Plug in power DC 5 V, max. output 60 mA
Storage temperature: -20 to 60 °C (-4 to 140 °F)
CONTROL S OUT: Stereo mini jack 5.0 Vp-p
Storage humidity: 10 to 90%
REMOTE I/F
Dimensions: 750 (W) × 340 (H) × 1000 (D) mm
RS-232C/422A: D-sub 9-pin (female) selectable
(295⁄8 × 131⁄2 × 393⁄8 inches)
TRIG: Mini-jack
Mass: Approx. 95 kg (209 lb)
Power On: 12 V
Power Off: 0 V
Output impedance: 4.7 kΩ

Safety regulations: UL1950, cUL950, FCC Class A, IC Class A, VCCI

Class A, JEIDA, EN60 950 (TÜV), CE, C-tick

*1 ANSI lumens is a measuring method of the American National Standard Institute IT7.228.
*2 Not available in some areas. For details, please consult your nearest Sony office.

–163–
 2-6 Projector accessories
Outputs: Video (Phono connector (1))
VID-P50 1.0 Vp-p sync negative
Video Presentation Stand S-video (4 pin mini DIN (1))
•Clear image reproduction with a high Y: 1.0 Vp-p, 75 Ω, sync negative
horizontal resolution of over 450 TV lines C: 0.3 Vp-p, 75 Ω (PAL)
•12 times powered zoom capability •Fully 0.286 Vp-p, 75 Ω (NTSC)
Dimensions: 335 (W) × 525 (H) × 355(D) mm
automatic functions (auto focus, auto iris,
(131/4 × 203/4 × 14 inches)
auto white balance) for easy operation <when folded>
•Lighting unit as standard •Flip up and tilt 335 (W) × 70 (H) × 550 (D) mm
camera head up to 90 degrees to capture (131/4 × 27/8× 213/4 inches)
images within the room •One-touch Mass: 4.1 kg (9 lb 1 oz)
detachable close-up lens •Video output and Power requirement: AC 230 V, 50 Hz, 10 W
S-video (Y/C) output connector •Document
area is (300 × 300) enabling the use of A4
or letter size •Lightweight, easy-to-carry
design

Supplied accessories: AC cable

Operation manual

Specifications
General
Pick up device: 1/3-inch Interline transfer
CCD × 1
Picture element: 752 (H) × 582 (V)
Resolution: More than 450 TV lines
(horizontal)
S/N ratio: More than 48 dB
Lens: F1.8, f=5.4 to 64.8 mm
(×12 power zoom)
Shooting area: 300 × 225 mm (WIDE)
(117/8 × 101/8 inches)
25 × 19 mm (TELE)
PRODUCTS
DISPLAY

(1 × 3/4 inches)
Focus: Full Auto
Iris: Full Auto
Lighting: 4W fluorescent lamp (1)
White balance: Full Auto

S video in: 4-pin mini DIN (2)

VID-P110 Y: 1.0 Vp-p, 75 Ω, sync negative
Video Presentation Stand C: 0.3 Vp-p, 75 Ω
•Three-dimensional objects just as well as Audio in: Phono (2) pair, stereo
flat objects such as charts, drawings, books Input impedance: 47 kΩ
etc. can be displayed on TV monitors and Level: -10 dBu, unbalanced
Mic in: Standard jack (1)
projectors •1/3-inch CCD camera provides a
Input impedance: 3.3 kΩ
high horizontal resolution of over 450 TV Level: -60 dBu, unbalanced
lines •Auto focus, auto iris control and auto Output connectors:
white balance •Two pattern memories •One- Video out: Phono (1), BNC (1)
touch, swing out, close-up lens •12 times 1.0 Vp-p, 75 Ω, sync negative
powered zoom capability •Flip up, pan and S video out: 4-pin mini DIN (1)
tilt camera head •Dual arm lights, each with Y: 1.0 Vp-p, 75 Ω, sync negative
two 9 W florescent lamps •Built-in back light C: 0.3 Vp-p, 75 Ω
Audio out: Phono (1) pair, stereo
function •Input selector •S-video input /
Output impedance: less than
output connections (Y/C separate/mix circuit) 600 Ω
•Black and white mode •RS-232C interface Level: -10 dBu, unbalanced
for control from a PC •Lightweight, compact and RS-232C connector: D-sub 9-pin, male
easy-to-carry design Baud rate: 9600 bps
Power requirements: 230 V AC, 50/60 Hz
Supplied accessories: AC power code (1) Power consumption: 30 W
Operation manual (1) Mass: 8.0 kg (17 lb 10 oz)
Interface manual (1) Dimensions: 446 (W) × 583 (H) × 622 (D) mm
Specifications (175⁄8 × 23 × 241⁄2 inches)
Pick-up device: 1/3 inch interline transfer, CCD 446 (W) × 166 (H) × 634 (D) mm (when folded)
Picture element: 752 (H) × 582 (V) (175⁄8 × 65⁄8 × 25 inches)
Resolution: More than 450 TV lines
Shooting Area: 325 × 240 mm (max.)
(127⁄8 × 91⁄2 inches)
29 × 22 mm (min.)
(13⁄16 × 7⁄8 inches)
Lens: F=1.8 to 2.7,
f=5.4 to 64.8 mm
Output selector: Camera/Video 1/Video 2
Arm light: 9 W twin-fluorescent lamp (2)
Built-in backlight: 2.5 W cold cathode ray lamp (2)
Input connectors:
Video in: Phono (2) 1.0 Vp-p, 75 Ω,
sync negative

–164–
2-6 Projector accessories
VID-P150
Video Presentation Stand
•Three-dimensional objects just as well as flat objects such as
charts, drawings, books etc. can be displayed on TV monitors and
projectors •1/3-inch CCD camera provides a high horizontal
resolution of over 450 TV lines •Auto focus, auto iris control and auto
white balance •Four pattern memories •One-touch, swing out, close-
up lens •12 times powered zoom capability •Flip up, pan and tilt
camera head •Motorized (remotely controlled) pan and tilt camera
head •Home position for quick return to standard camera position
•Dual arm lights, each with two 9 W fluorescent lamps •Built-in back
light function •Input selector •S-video input/output connections (Y/C
separate/mix circuit) •Black and white mode •Wireless remote
commander supplied as standard •RS-232C interface for control
from a PC •Lightweight, compact and easy-to-carry design
Supplied accessories: Wireless remote commander (1)
AC power code (1)
Operation manual (1)
Interface manual (1)
Dry battery (2) (for remote commander)
Specifications
Pick-up device: 1/3 inch interline transfer, CCD
Picture element: 752 (H) × 582 (V)
Resolution: More than 450 TV lines
Shooting area: Approx. 325 × 260 mm (max.) (127⁄8 × 101⁄4 inches) S video out: 4-pin mini DIN (1)
Approx. 31 × 23 mm (min.) (11⁄4 × 29⁄32 inches) Y: 1.0 Vp-p, 75 Ω, sync negative
Lens: F=1.8 to 2.7, f=5.4 to 64.8 mm C: 0.3 Vp-p, 75 Ω
Output selector: Camera / Video 1 / Video 2 Audio out: Phono (1) pair, stereo
Arm light: 9 W twin-fluorescent lamp (2) Output impedance: less than 600 Ω
Built-in backlight: 2.5 W cold cathode ray lamp (2) Level: -10 dBu, unbalanced
Input connectors: Camera monitor out: Phono jack (1)
Video in: Phono (2) 1.0 Vp-p, 75 Ω, sync negative 1.0 Vp-p, 75 Ω, sync negative
S video in: 4-pin mini DIN (2) Wireless remote commander:
Y: 1.0 Vp-p, 75 Ω, sync negative Supplied as standard
C: 0.3 Vp-p, 75 Ω Service Area 60°, 5 m
Audio in: Phono (2) pair, stereo RS-232C connector: D-sub 9-pin, male

PRODUCTS
Input impedance: 47 kΩ Baud rate: 9600 bps

DISPLAY
Level: -10 dBu, unbalanced Power requirements: 230 V AC, 50/60 Hz
Mic in: Standard jack (1) Power consumption: 230 V, 0.3 A
Input impedance: 3.3 kΩ Mass: 8.8 kg (19 lb 6 oz)
Level: -60 dBu, unbalanced Dimensions: 446 (W) × 625 (H) × 622 (D) mm
Output connectors: (175⁄8 × 245⁄8 × 241⁄2 inches)
Video out: Phono (1), BNC (1) 446 (W) × 190 (H) × 711 (D) mm (when folded)
1.0 Vp-p, 75 Ω, sync negative (175⁄8 × 71⁄2 × 28 inches)

–165–
 2-6 Projector accessories

PC-3000
Signal Interface Switcher for VPH-G90E/G90M,
VPL-FE100E/FE100M/FX200E/FX200M and
VPD-LE100
•Provides eight slots for optional interface boards and one
fixed output with 150 MHz cable compensation •Up to eight
PC-3000 units can be connected, enabling up to 57 different
signals to be connected in a system •RGB bandwidth of 300
MHz •Equipped with an RS-232C/RS422A communication
port •Equipped with a PJ COM port, in accordance with
RS-485 •Incorporates an LCD display in the front panel for
easier setting and adjustments •Input selection of a
connected projector, as well as the input selection of the
PC-3000 itself, can be controlled via the front panel •Last
channel memory •Can be easily controlled with optional
remote commander RM-PJ3000S •Trig terminal to provide
control of an integrated projection room •19-inch EIA
standard rack mountable with supplied rack mount kit
Supplied accessories: AC cable
Rack mount kit for 19-inch EIA standard rack
Operating instructions
Terminator
Optional accessories: Remote commander RM-PJ3000S
9-pin remote control cable RCC-5G/10G/30G
(for PJ COM and RS-422A)

Specifications
PRODUCTS
DISPLAY

General
RGB bandwidth: 300 MHz -3 dB
Power requirements: 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 424 (W) × 133 (H) × 420 (D) mm
(1611⁄16 × 51⁄4 × 1617⁄32 inches)
Mass: 9.3 kg (20 lb 7 oz)

Outputs
BNC connector (8), DIN 4-pin (1)
Video signal: Gain unity, impedance 75 Ω
Sync signal: 5 Vp-p (Impedance high)
1 Vp-p (Impedance 75 Ω)
Audio: Gain unity, impedance 1 kΩ
CONTROL S IN/ Stereo mini jack, 5 Vp-p
PLUG IN POWER: DC 5 V, max. output 60 mA
CONTROL S OUT: Stereo mini jack, 5 Vp-p
TRIG: Mini jack
Power ON: DC 12 V, output impedance 4.7 kΩ
Power OFF: 0 V
Remote
RS-232C/422A: D-sub 9-pin (Female)
PJ COM IN/OUT: D-sub 9-pin (Female)
Remote 2: Half pitch 26-pin

*With optional IFB-40, the PC-3000 is also compatible with other current projectors.

–166–
2-6 Projector accessories
IFU-1271M*1 Power requirements:
AC 220 to 240 V, 50/60 Hz
Interface Unit for VPH-G90E/G90M/
G70QM/G70QMG/G70VRM/D50QM/ Dimensions: 180 (W) × 105 (H) × 185 (D) mm
D50HTM (71⁄8 × 41⁄4 × 73⁄8 inches)
Mass: 3 kg (6 lb 9.8 oz)
•One in/two out signal distributor with
Supplied accessories:
100MHz bandwidth*2 AC power cord
•Converts digital signal level to analogue Operation manual
signal level for output
•Sync output mode selection

Inputs: (Open for an optional IFB Series

input module)
Output: BNC ×5 (2)
Phono (2) *1 Not available in some areas.
(stereo or monaural selectable) *2 The output signal from IFB-1000 is the same as the
input. The output signal from IFB-1200 can be changed
Bandwidth: 120 MHz (-3 dB) according to the selection switch on the board
(component/RGB).

Frequency response:
IFU-SC50 Up to fH: 80 kHz
Interface Unit for the VPL-PX1/ (SXGA 1280 × 1024, fV: 75 Hz)
S900E/S900M Cable length: 0.5 m (193⁄4 inches)
•Two input, one output signal selector -
Dimensions: 108 (W) × 48.5 (H) × 108 (D) mm
allows two computers to be simultaneously
(43⁄8 × 115⁄16 × 43⁄8 inches)
connected to one projector Mass: Approx. 370 g (13 oz)
•Built-in mouse receiver for wireless mouse
control

Inputs/Outputs:
INPUT 1/2:

PRODUCTS
HD D-sub 15-pin (female)

DISPLAY
OUTPUT: HD D-sub 15-pin (male)
Mouse IN: Square 13-pin (female)
Audio IN/OUT:
Stereo mini jack

Inputs/Outputs:
IFB-12A Video: BNC (5)
Interface Board for VPH-G90E/G90M/ Audio: Phono (2)
G70QM/G70QMG/D50QM, (stereo or monaural selectable)

VPL-FE100E/FE100M/FX200E/ Dimensions: 129 (W) × 35 (H) × 138 (D) mm

FX200M, VPD-LE100, PC-3000 and (51⁄8 × 17⁄16 × 51⁄2 inches)
Mass: Approx. 200 g (7 oz)
IFU-1271M
•Accepts analogue RGB, component (Y/R-
Y/B-Y), HDTV (Y/PB/PR, GBR), composite
video and Y/C video signals
•RGB bandwidth of 300 MHz -3 dB
•Cable compensation function for output
signals (150 MHz)

*For input only. Acceptable signals vary according to the connected projector.

Inputs:
IFB-21 RGB: Analogue, HD D-sub 15-pin
Interface Board for VPH-G90E/G90M/ AUDIO: Phono
G70QM/G70QMG/G70VRM/D50QM, (stereo or monaural selectable)
VPL-FE100E/FE100M/FX200E/
Dimensions: 129 (W) × 35 (H) × 138 (D) mm
FX200M, VPD-LE100 and IFU-1271M (51⁄8 × 17⁄16 × 51⁄2 inches)
•RGB bandwidth of 150 MHz Mass: Approx. 200 g (7 oz)

–167–
 2-6 Projector accessories
Inputs/Outputs:
IFB-40 14-pin multi connectors
Interface Board for VPH-G90E/G90M/ (Input: male, Output: female)
G70QM/G70QMG/D50QM and Power requirements:
DC 12 V
PC-3000 Power consumption:
•14-pin multi-connector input/output board Max. 2 W
(for SIC-M/CCQ cable)
•Used to connect projector to signal Dimensions: 129 (W) × 35 (H) × 138 (D) mm
interface switcher PC-3000 (51⁄8 × 17⁄16 × 51⁄2 inches)
•RGB bandwidth of 70 MHz Mass: Approx. 200 g (7 oz)
•Cable compensation function for output
signal (70 MHz)

Inputs/Outputs:
IFB-50 In: BNC, Component SDI
Interface Board for VPH-G90E/G90M/ Out: BNC, Active loop-through
G70QM/G70QMG/D50QM,
Dimensions: 129 (W) × 35 (H) × 138 (D) mm
VPL-FE100E/FE100M/FX200E/ (51⁄8 × 17⁄16 × 51⁄2 inches)
FX200M, VPD-LE100, PC-3000 and Mass: Approx. 200 g (7 oz)
IFU-1271M
•Component SDI
•Serial Digital Interface board for
SMPTE-259 M-C/ITU-R BT656-3 4:2:2 video
signals
PRODUCTS
DISPLAY

•IFB-50 manages video signals only. Serial

digital audio signals are not supported.

Y/C IN: Loop-through Mini DIN 4-pin

IFB-G90E Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω,
Interface Board for VPH-G90E automatic termination
•Accepts composite video signal and S C: 0.3 Vp-p ±2 dB (PAL), 75 Ω
video signal input automatic termination or Burst 0.286
Vp-p ±2 dB (NTSC), 75 Ω automatic
Inputs/Outputs: termination
VIDEO:
Composite: Dimensions: 370 (W) × 90 (H) × 50 (D) mm
Loop-through BNC, (145⁄8 × 35⁄8 × 2 inches)
1.0 Vp-p ±2 dB sync negative, Mass: 260 g (9 oz)
75 Ω automatic termination
Y IN: BNC, 1.0 Vp-p ±2 dB sync negative,
75 Ω, terminated
C IN: BNC,
0.3 Vp-p ±2 dB (PAL), sync negative,
75 Ω terminated or Burst 0.286 Vp-p
±2 dB (NTSC), sync negative, 75 Ω
terminated

Inputs/Outputs:
IFB-G70QMG VIDEO: Loop-through BNC
Interface Board for VPH-G70QMG 1.0 Vp-p ±2 dB sync negative, 75 Ω
•Acceptable for composite video signal and S VIDEO:
S video signal input Y IN: BNC
•Composite video signal and Y/C video 1.0 Vp-p ±2 dB sync negative, 75 Ω
signal are Loop-through C IN: BNC
0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Y/C IN:
Y(luminance):
1.0 Vp-p ±2 dB sync negative, 75 Ω
C(chrominance):
0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω

Dimensions: 233 (W) × 161 (H) × 43 (D) mm

(91⁄4 × 63⁄8 × 13⁄4 inches)
Mass: 210 g (7.4 oz)

–168–
2-6 Projector accessories
IFB-1000
Interface Board for VPH-G90E/G90M/
G70QM/G70QMG/G70VRM/D50QM,
VPL-FE100E/FE100M/FX200E/
FX200M and IFU-1271M
Inputs:
Composite*: Loop-through BNC
Y/C*: Loop-through Mini DIN 4-pin
Audio: Phono
(stereo or monaural selectable)

Dimensions: 129 (W) × 35 (H) × 138 (D) mm

(51⁄8 × 17⁄16 × 51⁄2 inches)
Mass: 160 g (5.6 oz)

* The Y/C IN has priority over the Composite IN.

IFB-1200
Interface Board for VPH-G70QM/
G70QMG/D50QM and IFU-1271M
•Can provide component input to a projector

Inputs:
Component: BNC (3)
(Y/R-Y/B-Y)
Audio: Phono
(stereo or monaural selectable)

Dimensions: 129 (W) × 35 (H) × 138 (D) mm

PRODUCTS
DISPLAY
(51⁄8 × 17⁄16 × 51⁄2 inches)
Mass: 180 g (6.3 oz)

Inputs:
IFB-1301 HD: BNC
Interface Board for VPH-G70QM/ Y (luminance):
G70QMG/D50QM and IFU-1271M 1.0 Vp-p ±2 dB, 75 Ω
•HD (Y/PB/PR) input PB/PR (component):
±0.35 Vp-p, 75 Ω
•Converts Y/PB/PR signals to RGB signals
•Colour, Hue and Sharpness adjustment Outputs:
available G/Y: 1.0 Vp-p ±2 dB, 75Ω
•Audio (Left (Mono)/Center/Right) input B/R: 0.7 Vp-p ±2 dB, 75 Ω
PB/PR: 0.35 Vp-p, 75 Ω
AUDIO: Phono (stereo/monaural)
250 mV rms, impedance more than
47 kΩ

Dimensions: 129 (W) × 35 (H) × 138 (D) mm

(51⁄8 × 17⁄16 × 51⁄2 inches)
Mass: 200 g (7 oz)

IFB-1400
Interface Board for VPH-G90E/G90M
G70QM/G70QMG/G70VRM/D50QM
•Accepts progressive (525P/480P)
component

Inputs:
Progressive component:
BNC type
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
CB: 0.7 Vp-p ±2 dB positive, 75 Ω
CR: 0.7 Vp-p ±2 dB positive, 75 Ω

Dimensions: 129 (W) × 35 (H) × 138 (D) mm

(51⁄8 × 17⁄16 × 51⁄2 inches)
Mass: Approx. 140 g (5 oz)

–169–
 2-6 Projector accessories
Y/C IN: Loop-through Mini DIN 4-pin
IFB-X2000E Y (luminance):
Interface Board for VPL-FE100E/ 1.0 Vp-p ±2 dB sync negative, 75 Ω
FX200E C (chrominance):
•Accepts composite, Y/C, S video Burst 0.3 Vp-p ±2 dB (PAL), 75 Ω or
0.286 Vp-p ±2 dB (NTSC), 75 Ω
•Audio input/output (stereo)
AUDIO IN: Phono, stereo, 500 mV rms,
impedance more than 47 kΩ
Inputs/Outputs:
VIDEO: Loop-through BNC
Dimensions: 67 (W) × 136 (H) × 33 (D) mm
1.0 Vp-p ±2 dB sync negative, 75 Ω
(23⁄4 × 53⁄8 × 15⁄16 inches)
S VIDEO
Mass: Approx. 145 g (5 oz)
Y IN: BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω
C IN: BNC
0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω

VPS-515RF/415RF
•Screen with ultra-thin 0.2 mm screen surround
for RVP-511DMS/411DMS
•Little disturbance of reproduced images
•Suitable for permanent applications

Dimensions:
VPS-515RF: 1011.4 (W) × 84.2 (D) × 760.4 (H) mm
(397⁄8 × 33⁄8 × 30 inches)
VPS-415RF: 823.4 (W) × 84.2 (D) × 620.4 (H) mm
(321⁄2 × 33⁄8 × 241⁄2 inches)
PRODUCTS
DISPLAY

Mass:
VPS-515RF: 5.2 kg (11 lb 7 oz) VPS-515RF
VPS-415RF: 3.7 kg (8 lb 3 oz)
VPS-415RF

VPS-511RF/411RF
•Screen with durable 1.7 mm screen surround
for RVP-511DMS/411DMS
•Suitable for general applications

Dimensions:
VPS-511RF: 1011 (W) × 87.1(D) × 760 (H) mm
(397⁄8 × 31⁄2 × 30 inches)
VPS-411RF: 823 (W) × 87.1(D) × 620 (H) mm
(321⁄2 × 31⁄2 × 241⁄2 inches)

Mass:
VPS-511RF: 7.9 kg (17 lb 7 oz)
VPS-411RF: 6.2 kg (13 lb 11 oz)
VPS-511RF

VPS-411RF

PWR-B511A/B411A
Installation Stand for RVP-511DMS/411DMS
•Base stand for the RVP-511DMS/411DMS with casters
and height-adjuster
•For up to 8 (PWR-B511A for RVP-511DMS) or 10
(PWR-B411A for RVP-411DMS) vertical stacks*
*In some cases, reinforcement against earthquakes may be required

Dimensions: PWR-B511A: 878 (W) × 587.7 (H) × 1126 (D) mm

(345⁄8 × 231⁄4 × 443⁄8 inches)
PWR-B411A: 690 (W) × 587.7 (H) × 934 (D) mm
(271⁄4 × 231⁄4 × 367⁄8 inches) PWR-B511A PWR-B411A

Mass: PWR-B511A: 50 kg (110 lb 4 oz)

PWR-B411A: 44 kg (97 lb)

–170–
2-6 Projector accessories
PWR-P512A/P513A/P412A/P413A
Position Beams for RVP-511DMS/411DMS
•A pair of position beams for dual or double mount horizontally
of RVP-511DMS/ 411DMS •Can be utilized in combination
with other PWR-P513A/P512A/P412A/ P413A beams for
more than triple mount. •PWR-P512A for dual mount of the
RVP-511DMS •PWR-P513A for triple mount of the RVP-
511DMS •PWR-P412A for dual mount of the RVP-411DMS
•PWR-P413A for triple mount of the RVP-411DMS
PWR-P413A
Dimensions: PWR-P512A: 1940 (W) × 80 (H) × 80 (D) mm
(761⁄2 × 31⁄4 × 31⁄4 inches) PWR-P412A
PWR-P513A: 2952 (W) × 80 (H) × 80 (D) mm
(1161⁄4 × 31⁄4 × 31⁄4 inches)
PWR-P412A: 1564 (W) × 80 (H) × 80 (D) mm Mass: PWR-P512A: 24 kg (52 lb 15 oz)
(615⁄8 × 31⁄4 × 31⁄4 inches) PWR-P513A: 36 kg (79 lb 6 oz)
PWR-P413A: 2388 (W) × 80 (H) × 80 (D) mm PWR-P412A: 20 kg (44 lb 1 oz)
(941⁄8 × 31⁄4 × 31⁄4 inches) PWR-P413A: 30 kg (66 lb 2 oz)

RGB/component:
PWB-411D BNC ×5
Composite Video Input Board for R/R-Y: 0.7 Vp-p ±2 dB, 75 Ω
RVP-511DMS/411DMS G: 0.7 Vp-p ±2 dB, 75 Ω
•Accepts composite, Y/C, component and G on sync/Y: 1.0 Vp-p ±2 dB, sync
negative, 75 Ω
15kHz RGB video signals
B/B-Y: 0.7 Vp-p ±2 dB, 75 Ω
•Compatible with PAL/NTSC/SECAM/NTSC4.43 H sync/C sync: 1.0 to 4.0 Vp-p, 75 Ω,
•Includes field doubling circuit positive/negative
V sync: 1.0 to 4.0 Vp-p, 75 Ω,
Inputs positive/negative
Composite video:
BNC × 1

PRODUCTS
1 Vp-p, sync negative, 75 Ω

DISPLAY
Y/C: BNC × 2
Y(luminance): 1.0 V p-p ±2 dB, sync
negative, 75 Ω
C(chrominance): 0.3 Vp-p ±2 dB (PAL),
75 Ω, 0.286 Vp-p ±2 dB
(NTSC), 75 Ω

PWK-411D
System Control Kit for
RVP-511DMS/411DMS
Includes accessories for system control:
•Infrared remote control unit RM-PJ1292
•Wired/wireless remote control unit
•Full remote operation
•Function keys can be illuminated for
operation in dark rooms
•SIRCS cable (10m)
•Batteries (AA size × 3)
•System manual

RM-PJ1292

CHP-411DM
Projection Wall Chassis for
RVP-511DMS/411DMS
•Provides flexibility in various applications
•For added flexibility, can be combined with
the RVP-511DMS/411DMS cabinet
•Can be used as a back-up chassis unit for
RVP-511DMS/411DMS

Dimensions: 687 (W) × 469 (H) × 465 (D) mm

(271⁄8 × 181⁄2 × 183⁄8 inches)
Mass: 47 kg (103 lb 10 oz)
Supplied accessories:
AC power cord
Remote control cable (1.2 m)
Operation manual

–171–
 2-6 Projector accessories
EXB-DS10 •Digital noise reducer incorporated
•Compatible with PAL, NTSC, SECAM,
Extension Board for VPH-G70QM/ NTSC4.43 and PAL-M
G70QMG/G70VRM/D50QM/D50HTM* •3D comb filter or 3-line comb filter for NTSC
•Line doubler signal processing board and 3-line comb filter for PAL signals to
designed to be fitted in the VPH-G70QM/ reduce cross colour and dot interference for
G70QMG/G70VRM/D50QM/D50HTM* clear image reproduction
•Compatible with composite video, Y/C
video, component and 15 kHz RGB signals
•Aperture is adjustable horizontally and
vertically to achieve crisp image
reproduction with any type of input signal
•Line doubler signal processing can be
turned ON and OFF via the remote
commander or control panel
•Moving image correction circuitry is
incorporated for natural reproduction of line-
doubled fast-moving images *The EXB-DS10 is supplied with the VPH-D50HTM.

EXB-5010
Extension Board for PC-3000
•Designed to connect an RGB monitor to the
PC-3000
•Converts HDTV (GBR, Y/PB/PR) and
component (Y/R-Y/B-Y) signals to RGB
signal
•Colour, Hue and Sharpness can be
controlled with EXB-5010
PRODUCTS
DISPLAY

SIC-10
Signal Interface Cable for
VPH-G90E/G90M/G70QM/G70QMG/
G70VRM/D50QM/D50HTM
Connector: 5BNC/5BNC
Length: 10 m (32.8 ft)

SIC-S20/S21/S22
Mouse Cables for VPL-PX30/PX20/S900E/
S900M/PX1
•Enables operation of a connected computer with the
RM-PJM600/PJM610

Connector:
SIC-S20 for Macintosh
Mini DIN 4-pin (male) to computer
Square 13-pin (male) to MOUSE port of a projector
SIC-S21 for Serial
D-sub 9-pin (male) to Serial port
Square 13-pin (male) to MOUSE port of a projector
SIC-S22 for PS/2 (IBM PC/AT compatible) and Macintosh
SIC-S20/S22 SIC-S21
Mini DIN 6-pin (male) to PS/2 port
Square 13-pin (male) to MOUSE port of a projector
Length: 2 m (6.6 ft)

–172–
2-6 Projector accessories
SMF-400
Monitor Cable for VPH-G70QM/
G70QMG/D50QM, VPL-FE100E/
FE100M/FX200E/FX200M/PX30/PX20/
S900E/S900M/PX1/CS1/VW10HT and
VPD-LE100
Connector: HD D-sub 15-pin (male) to
5 BNC (male)
Length: 2 m (6.6 ft)

SMF-401
Signal Cable for VPH-G70QM/
G70QMG/D50QM, VPL-FE100E/
FE100M/FX200E/FX200M/PX30/PX20/
S900E/S900M/PX1 and VPD-LE100
Connector: HD D-sub 15-pin (male) to
HD D-sub 15-pin (male)
Length: 2 m (6.6 ft)

PRODUCTS
DISPLAY
SMF-402
Signal Cable for VPL-S900E/S900M/
PX1/CS1
Connector: HD D-sub 15-pin (male) to
Phono × 3
Length: 5 m (16.4 ft)

SMF-410
Monitor Cable for VPL-PX30/PX20/CS1
Connector: HD D-sub 15-pin (male) to
HD D-sub 15-pin (male)
Length: 2 m (6.6 ft)

–173–
 2-6 Projector accessories
SMF-D102
Digital Signal Cable for VPL-PX30/PX20
Connector: DFP 20-pin (male) to
DFP 20-pin (male)
Length: 2 m (6.6 ft)

SMF-D110
Digital Signal Cable for VPL-PX30/PX20
Connector: DFP 20-pin (male) to
DFP 20-pin (male)
Length: 10 m (32.8 ft)
PRODUCTS
DISPLAY

RM-PJ10
Remote Control Receiver for
VPH-G90E/G90M/G70QM/G70QMG/
G70VRM/D50QM/D50HTM,
VPL-FE100E/FE100M/FX200E/
FX200M, VPD-LE100 and ADN-8080
Power requirements:
DC 6 V
Dimensions: 100 (W) × 50 (H) × 57 (D) mm
(4 × 2 × 21/4 inches)
(including mounting bracket)
Mass: 0.1 kg (3.5 oz)
(including mounting bracket)
Supplied accessories:
Remote control cable: 15 m
(45 ft)
Screws

RM-PJD50
Remote Control Unit for
VPH-G90E/G90M/D50HTM*
•Card type design
•Power on/off and input selection operation
•Direct video memory selection

Power requirements:
CR2025 lithium battery (1)
Dimensions: 54 (W) × 86 (H) × 6.5 (D) mm
(21⁄4 × 31⁄2 × 9⁄32 inches)
Mass: Approx. 21.7 g (0.8 oz)

*The RM-PJD50 is supplied with the VPH-D50HTM.

–174–
2-6 Projector accessories
Power requirements:
RM-PJ1001 DC 5 V (Size AA (R6) battery (3))
Remote Control Unit for Dimensions: 165 (W) × 35 (H) × 141 (D) mm
VPH-G90E*/G90M*/G70QM/G70QMG/ (61⁄2 × 17⁄16 × 53⁄4 inches)
Mass: Approx. 285 g (10 oz)
G70VRM/D50QM/D50HTM* and
VPL-FE100E/FE100M
•Wired/wireless remote control unit for setup
and operation
•Full remote operation
•System set up (SYS SET) key for use with
PJ COM (RS-485) system
•Keys can be illuminated for operation in
dark rooms

*The RM-PJ1001 is supplied with the VPH-G90E/G90M/D50HTM.

Laser beam:
RM-PJ3000S Laser type: Class II
Remote Control Unit for Wave length: 645 nm
VPH-G90E/G90M/G70QM/G70QMG/ Output: 1 mW
Power requirements:
G70VRM/D50QM, VPL-FE100E/ DC 3 V (Size AA (R6) battery (2))
FE100M/FX200E/FX200M and Dimensions: 45 (W) × 24 (H) × 178 (D) mm
(113⁄16 × 31⁄32 × 71⁄8 inches)
VPD-LE100 Mass: Approx. 93 g (3.3 oz)
•Wireless remote control unit for simple
remote control
•Function keys can be illuminated for
operation in dark rooms

PRODUCTS
DISPLAY
•Equipped with a laser pointer for use in
presentations

Laser beam:
RM-PJM610 Laser type: Class II
Remote Control Unit for VPL-PX30*/ Wave length: 645 nm
PX20*/S900E/S900M/PX1/CS1 Output: 1 mW
•Wireless remote control unit for Power requirements:
DC 3 V (Size AA (R6) battery (2))
presentations
Dimensions: 51 (W) × 42 (H) × 162 (D) mm
•Digital zoom, function and help keys (21⁄8 × 61⁄2 × 111⁄16 inches)
•Equipped with a laser pointer Mass: Approx. 130 g (4.6 oz)

*The RM-PJM610 is supplied with the VPL-PX30/PX20.

VPS-50C
Portable Screen
VPS-50C
Screen size 50-inch
Construction Beaded glass flat screen
Dimensions Folded: 870 (W) × 88 (H) × 80 (D) mm
(343⁄8 × 31⁄2 × 31⁄4 inches)
Assembled: 1131 (W) × 870 (H) × 240 (D) mm
Mass 2.3 kg (5 lb)

–175–
 2-6 Projector accessories
VPS-120FH*/100FH*
Video Screen

VPS-120FH VPS-100FH
Screen size 120-inch 100-inch compatible
Construction Beaded glass high-efficiency flat screen
with winding mechanism
Dimensions 2780 (W) × 2545 (H) mm 200 (W) × 1765 (H) mm
(1091⁄2 × 1001⁄4 inches) (863⁄4 × 691⁄2 inches)
Mass 21 kg (46 lb 5 oz) 8 kg (17 lb 10 oz)

*Not available in some areas. For details, please consult your nearest Sony office.
PRODUCTS
DISPLAY

–176–
2-6 Projector accessories
PSS-10/70/90/600/610/722/2000
Suspension Support
PSS-10 for PSS-70/90/722/800/2000
PSS-70 for VPH-G70QM/G70QMG/G70VRM/D50QM/D50HTM
PSS-90 for VPH-G90E/G90M
PSS-600 for VPL-S900E/S900M
PSS-610 for VPL-PX30/PX20/VW10HT
PSS-70
PSS-722 for VPH-V20M/V22M
PSS-2000 for VPL-FE100E/FE100M/FX200E/FX200M

1. Direct installation on the ceiling — PSS-70/90/500/600/610/722/2000

2. Installation on the ceiling (height adjustable) — PSS-10 + PSS-70 or
PSS-90 or PSS-722 or PSS-2000

Mass: PSS-10: 10.3 kg (22 lb 11 oz)

PSS-70: 9.0 kg (19 lb 13 oz)
PSS-90: 15 kg (33 lb 11 oz) PSS-90
PSS-600: 2.7 kg (5 lb 15 oz) PSS-10
PSS-610: 2.7 kg (5 lb 15 oz)
PSS-722: 1.8 kg (3 lb 15 oz)
PSS-2000: 5.5 kg (12 lb 2 oz)

PRODUCTS
DISPLAY
PSS-600 PSS-610

PSS-2000

PSS-722

–177–
 2-6 Projector accessories
LMP-600
Projector Lamp (for replacement) for
VPL-S900E/S900M
•120 W UHP lamp

Dimensions: 75 (W) × 105 (H) × 83.5 (D) mm

(25⁄16 × 41⁄8 × 35⁄16 inches)
Mass: 210 g (7.4 oz)

LMP-C120
Projector Lamp (for replacement) for
VPL-CS1
•120 W UHP lamp

Dimensions: 65 (W) × 62.5 (H) × 91 (D) mm

(25⁄8 × 21⁄2 × 35⁄8 inches)
Mass: Approx. 164 g (6 oz)
PRODUCTS
DISPLAY

LMP-P120
Projector Lamp (for replacement) for
VPL-PX1
•120 W UHP lamp

Dimensions: 75 (W) × 83.5 (H) × 105 (D) mm

(3 × 33⁄8 × 41⁄4 inches)
Mass: Approx. 210 g (7.4 oz)

LMP-P200
Projector Lamp (for replacement) for
VPL-PX30/PX20/VW10HT
•200 W UHP lamp

Dimensions: 74.5 (W) × 91.5 (H) × 107.5 (D) mm

(3 × 35⁄8 × 41⁄4 inches)
Mass: Approx. 280 g (10 oz)

–178–
2-6 Projector accessories
LMP-Q120
Quad Projector Lamp (for
replacement) for VPL-FE100E/
FE100M/FX200E/FX200M
•Four 120 W UHP lamps

Dimensions: 220 (W) × 105 (H) × 147 (D) mm

(83⁄4 × 41⁄4 × 57⁄8 inches)
Mass: 1.4 kg (3 lb)

LMP-S120
Projector Lamp (for replacement) for
LMP-Q120
•120 W UHP lamp

Dimensions: Approx. 70 (W) × 84 (H) × 65 (D) mm

(Approx. 27⁄8 × 33⁄8 × 25⁄8 inches)
Mass: 140 g (4 oz)

PRODUCTS
DISPLAY
LMP-L2000
Projector Lamp (for replacement) for
VPD-LE100
•2 kW Xenon lamp

Dimensions: 165 (W) × 165 (H) × 250 (D) mm

(61⁄2 × 61⁄2 × 97⁄8 inches)
Mass: 3.4 kg (7 lb 4 oz)

SU-PJ2000
Projector Stand (for twin and triple
stacking) for VPL-FE100E/FE100M/
FX200E/FX200M
Dimensions: 840 (W) × 360 (H) × 840 (D) mm
(331⁄8 × 141⁄4 × 331⁄8 inches)
Mass: Approx. 32 kg (70 lb 6 oz)

–179–
 2-6 Projector accessories
VLC-SC50*
Carrying Case for VPL-PX1
•Soft case with strap and easy opening
double fasteners
•Can store projector, peripherals and a
notebook PC

Dimensions: 320 (W) × 250 (H) × 200 (D) mm

(125⁄8 × 97⁄8 × 77⁄8 inches)
Mass: Approx. 0.8 kg (1 lb 12 oz)

*Not available in some areas. For details, please consult your nearest Sony office.

VLC-600*
Carrying Case for VPL-PX30/PX20/
S900E/S900M
•Soft case with grip and removable strap
•Can store projector and peripherals

Dimensions: 358 (W) × 361 (H) × 138 (D) mm

(141⁄8 × 141⁄8 × 65⁄8 inches)
Mass: Approx. 1.4 kg (3 lb 1 oz)
PRODUCTS
DISPLAY

*Not available in some areas. For details, please consult your nearest Sony office.

–180–
2-6 Projector accessories

VPE/VPL/VPM series (by Aurora)

Video Screen Motor drive
d
w’
Model Screen size Dimensions Mass
Type Material Screen seam h
name (W × H)mm (W × H × D)mm (kg)
VPE-150 micro beads 3048 × 2286 3455 × 150 × 118 26 horizontal (1)
(150-inch) on white mat (120 × 90.0 inches) (136 × 5.9 × 4.6 inches)
VPE-170 micro beads 3454 × 2591 3862 × 150 × 118 30 horizontal (1) H
(170-inch) on white mat (136 × 102 inches) (152 × 5.9 × 4.6 inches) W
Motor drive VPE-200 micro beads 4064 × 3048 5812 × 310 × 248 129 horizontal (1)
(200-inch) on white mat (160 × 120 inches) (228.8 × 12.2 × 9.8 inches)
VPE-220 micro beads 4470 × 3353 6238 × 310 × 248 140 horizontal (1)
(220-inch) on white mat (176 × 132 inches) (245.6 × 12.2 × 9.8 inches)
Tension
VPE-250 micro beads 5080 × 3810 6928 × 310 × 248 150 horizontal (2) d
(250-inch) on white mat (200 × 150 inches) (272.8 × 12.2 × 9.8 inches) w’
VPL-150 micro beads 3048 × 2286 3448 × 2286 × 55 36 vertical (1)
(150-inch) on white mat (120 × 90 inches) (135.8 × 90 × 2.2 inches)
VPL-170 micro beads 3454 × 2591 3854 × 2991 × 55 41 vertical (1)
h
(170-inch) on white mat (136 × 102 inches) (151.7 × 117.7 × 2.2 inches) H
Tension VPL-200 micro beads 4064 × 3048 4664 × 3648 × 55 48 vertical (2) W
(200-inch) on white mat (160 × 120 inches) (183.6 × 143.6 × 2.2 inches)
VPL-220 micro beads 4470 × 3353 5070 × 3953 × 55 53 vertical (2)
(220-inch) on white mat (176 × 132 inches) (199.6 × 155.6 × 2.2 inches)
VPL-250 micro beads 5080 × 3810 5680 × 4410 × 55 60 vertical (2)
(250-inch) on white mat (200 × 150 inches) (223.6 × 173.6 × 2.2 inches)
VPM-150 micro beads 3048 × 2286 3292 × 2456 × 35 9.5 horizontal (1)
Hang-up
(150-inch) on white mat (120 × 90 inches) (129.6 × 96.7 × 1.4 inches) d
VPM-170 micro beads 3454 × 2591 3698 × 2761 × 35 11 horizontal (1) w’
(170-inch) on white mat (136 × 102 inches) (145.6 × 108.7 × 1.4 inches)
Hang.up VPM-200 micro beads 4064 × 3048 4584 × 3488 × 35 12 horizontal (1)
(200-inch) on white mat (160 × 120 inches) (180.5 × 137.3 × 1.4 inches) H h
VPM-220 micro beads 4470 × 3353 5010 × 3813 × 35 13 horizontal (1)
W
(220-inch) on white mat (176 × 132 inches) (197.2 × 150.1 × 1.4 inches)
5080 × 3810 5700 × 4350 × 35

PRODUCTS
VPM-250 micro beads 15 horizontal (2)

DISPLAY
(250-inch) on white mat (200 × 150 inches) (224.4 × 171.2 × 1.4 inches)

–181–
 2-7 Projector lenses
VPLL-FM20
Projection Lens for
VPL-S900E/S900M
•Fixed short focus lens
•For rear projection

Lens: f24.24mm/F3.0
Screen coverage:
50-200 inches
Throwing distance:
100-inch: 1800 mm
200-inch: 3300 mm
Dimensions: 120 (W) × 120 (H) × 204 (D) mm
(43⁄4 × 43⁄4 × 81⁄8 inches)
Mass: Approx. 1.5 kg (3 lb 4 oz)

VPLL-FM21
Projection Lens for VPL-PX30/PX20
•Fixed short focus lens

Lens: f24.5 mm/F2.0

Screen coverage:
40-300 inches
Throwing distance:
100-inch: 1800 mm
200-inch: 3690 mm
300-inch: 5580 mm
Dimensions: 140 (W) × 140 (H) × 233 (D) mm
PRODUCTS

(55⁄8 × 55⁄8 × 91⁄4 inches)

DISPLAY

Mass: Approx. 1.9 kg (4 lb)

VPLL-FM30
Projection Lens for
VPL-S900E/S900M
•Fixed short focus lens

Lens: f37 mm/F3.5

Screen coverage:
40-280 inches
Throwing distance:
100-inch: 2810 mm
200-inch: 5680 mm
280-inch: 7960 mm
Dimensions: 120 (W) × 120 (H) × 209 (D) mm
(43⁄4 × 43⁄4 × 81⁄4 inches)
Mass: 2.1 kg (4 lb 10 oz)

VPLL-ZM31
Projection Lens for VPL-PX30/PX20
•1.1 times zoom short focus lens

Lens: f41.4-45.6/F1.9-2.0
Screen coverage:
40-300 inches
Throwing distance:
100-inch: 3150-3300 mm
200-inch: 6410-6710 mm
300-inch: 9680-10120 mm
Dimensions: 154 (W) × 154 (H) × 252 (D) mm
(61⁄8 × 61⁄8 × 10 inches)
Mass: 3.1 kg (6 lb 13 oz)

–182–
2-7 Projector lenses
Dimensions: 100 (W) × 100 (H) × 221.9 (D) mm
VPLL-ZM101 (4 × 4 × 83⁄4 inches)
Projection Lens for Mass: 1.8 kg (3 lb 15 oz)
VPL-PX30/PX20/S900E/S900M
•1.5 times zoom long focus lens

Lens: f89-133.5 mm/F2.0-2.6

Screen coverage:
40-300 inches
Throwing distance:
VPL-PX30/PX20
100-inch: 6810-10030 mm
200-inch: 13840-20270 mm
300-inch: 20870-30500 mm
VPL-S900E/S900M
100-inch: 6870-10120 mm
200-inch: 13960-20440 mm
300-inch: 21040-30760 mm

VPLL-Z2019
Projection Lens for
VPL-FX200E/FX200M
•1.3 times zoom standard focus lens

Lens: f71.0-92.3mm/F2.5-3.0
Screen coverage:
40-500 inches
Throwing distance:
40-inch: 1490-1890 mm
100-inch: 3870-4880 mm

PRODUCTS
300-inch: 11820-14840 mm

DISPLAY
Dimensions: 158 (W) × 115 (H) × 211 (D) mm
(61⁄4 × 45⁄8 × 83⁄8 inches)
Mass: 2.4 kg (5 lb 4 oz)

Throwing distance:
VPLL-Z2025 VPL-FE100E/FE100M (5:4)
Projection Lens for VPL-FE100E/ 100-inch: 4830-7460 mm
FE100M/FX200E/FX200M 200-inch: 9850-15090 mm
•1.6 times zoom long focus lens 300-inch: 14860-22720 mm
VPL-FE100E/FE100M (4:3)
Lens: f92.1-147.3mm/F2.6-3.5 100-inch: 5170-7970 mm
Screen coverage: 200-inch: 10520-16120 mm
VPL-FE100E/FE100M (5:4): 300-inch: 15870-24260 mm
84-500 inches VPL-FX200E/FX200M
VPL-FE100E/FE100M (4:3): 100-inch: 5020-7750 mm
80-500 inches 200-inch: 10220-15660 mm
VPL-FX200E/FX200M: 300-inch: 15430-23580 mm
80-500 inches Dimensions: 158 (W) × 115 (H) × 277 (D) mm
(61⁄4 × 45⁄8 × 11 inches)
Mass: 3.8 kg (8 lb 6 oz)

Throwing distance:
VPLL-Z2039 VPL-FE100E/FE100M (5:4)
Projection Lens for VPL-FE100E/ 100-inch: 7690-11060 mm
FE100M/FX200E/FX200M 200-inch: 15560-22280 mm
•1.5 times zoom long focus lens 300-inch: 23420-33490 mm
VPL-FE100E/FE100M (4:3)
Lens: f144.4-216.5mm/F2.8-3.6 100-inch: 8220-11810 mm
Screen coverage: 200-inch: 16610-23780 mm
VPL-FE100E/FE100M (5:4): 300-inch: 25000-35750 mm
84-500 inches VPL-FX200E/FX200M
VPL-FE100E/FE100M (4:3): 100-inch: 7990-11480 mm
80-500 inches 200-inch: 16150-23120 mm
VPL-FX200E/FX200M: 300-inch: 24300-34760 mm
80-500 inches Dimensions: 158 (W) x 118.5 (H) x 321 (D) mm
(61⁄4 × 43⁄4 × 123⁄4 inches)
Mass: 4.1 kg (9 lb)

–183–
 2-7 Projector lenses
Throwing distance:
VPLL-Z3020 (5:4)
Projection Lens for 100-inch: 3900-4920 mm
VPL-FE100E/FE100M 200-inch: 7920-9960 mm
•1.3 times zoom standard focus lens 300-inch: 11940-15000 mm
(4:3)
Lens: f74.5-97.0 mm/F2.0-2.4 100-inch: 4170-5260 mm
Screen coverage: 200-inch: 8460-10040 mm
(5:4): 42-500 inches 300-inch: 12750-16020 mm
(4:3): 40-500 inches Dimensions: 158 (W) × 115 (H) × 222.5 (D) mm
(61⁄4 × 45⁄8 × 87⁄8 inches)
Mass: 2.7 kg (5 lb 15 oz)

Throwing distance:
VPLL-2009 VPL-FE100E/FE100M (5:4)
Projection Lens for VPL-FE100E/ 42-inch: 650 mm
FE100M/FX200E/FX200M 100-inch: 1730 mm
•Fixed short focus lens 300-inch: 5460 mm
VPL-FE100E/FE100M (4:3)
Lens: f34.2 mm/F3.0 40-inch: 660 mm
Screen coverage: 100-inch: 1860 mm
VPL-FE100E/FE100M (5:4): 300-inch: 5830 mm
42-500 inches VPL-FX200E/FX200M
VPL-FE100E/FE100M (4:3): 40-inch: 640 mm
40-500 inches 100-inch: 1800 mm
300-inch: 5670 mm
PRODUCTS

VPL-FX200E/FX200M:
Dimensions: 160 (W) × 160 (H) × 307 (D) mm
DISPLAY

40-500 inches
(63⁄8 x 63⁄8 x 121⁄8 inches)
Mass: 4.2 kg (9 lb 4 oz)

Throwing distance:
VPLL-2014 VPL-FE100E/FE100M (5:4)
Projection Lens for VPL-FE100E/ 42-inch: 1040 mm
FE100M/FX200E/FX200M 100-inch: 2650 mm
•Fixed short focus lens 300-inch: 8200 mm
VPL-FE100E/FE100M (4:3)
Lens: f51.9 mm/F3.0 40-inch: 1060 mm
Screen coverage: 100-inch: 2840 mm
VPL-FE100E/FE100M (5:4): 300-inch: 8760 mm
42-500 inches VPL-FX200E/FX200M
VPL-FE100E/FE100M (4:3): 40-inch: 1030 mm
40-500 inches 100-inch: 2760 mm
VPL-FX200E/FX200M: 300-inch: 8520 mm
40-500 inches Dimensions: 160 (W) × 160 (H) × 294.5 (D) mm
(63⁄8 × 63⁄8 × 115⁄8 inches)
Mass: 4.9 kg (10 lb 12 oz)

Throwing distance:
VPLL-2075 VPL-FE100E/FE100M (5:4)
Projection Lens for VPL-FE100E/ 100-inch: 14460 mm
FE100M/FX200E/FX200M 200-inch: 28760 mm
•Fixed long focus lens 300-inch: 43050 mm
VPL-FE100E/FE100M (4:3)
Lens: f269.1 mm/F3.5 100-inch: 15420 mm
Screen coverage: 200-inch: 30680 mm
VPL-FE100E/FE100M (5:4): 300-inch: 45930 mm
82-500 inches VPL-FX200E/FX200M
VPL-FE100E/FE100M (4:3): 100-inch: 15000 mm
80-500 inches 100-inch: 29830 mm
VPL-FX200E/FX200M: 300-inch: 44660 mm
80-500 inches Dimensions: 158 (W) × 115 (H) × 263.5 (D) mm
(61⁄4 × 45⁄8 × 103⁄8 inches)
Mass: 3.1 kg (6 lb 13 oz)

–184–
2-7 Projector lenses
VPLL-3050 (61⁄4 × 45⁄8 × 83⁄8 inches)
Mass: 3.4 kg (7 lb 7 oz)
Projection Lens for
VPL-FE100E/FE100M
•Fixed long focus lens

Lens: f181.2 mm/F2.0

Screen coverage:
(5:4): 84-500 inches
(4:3): 80-500 inches
Throwing distance:
(5:4)
100-inch: 14460 mm
200-inch: 28760 mm
300-inch: 43050 mm
(4:3)
100-inch: 15420 mm
200-inch: 30680 mm
300-inch: 45930 mm
Dimensions: 158 (W) × 117 (H) × 211 (D) mm

Dimensions: 184 (W) × 184 (H) × 329 (D) mm

VPDL-Z1014 (71⁄4 × 71⁄4 × 13 inches)
Projection Lens for VPD-LE100 Mass: 8.5 kg (18 lb 11 oz)
•1.3 times zoom short focus lens

Lens: f33.5-44.6 mm/F3.0

Screen coverage:
70-700 inches
Throwing distance:
(5:4)
100-inch: 2830-3770 mm
200-inch: 5760-7670 mm
300-inch: 8690-11580 mm

PRODUCTS
DISPLAY
(4:3)
100-inch: 3030-4030 mm
200-inch: 6150-8190 mm
300-inch: 9270-12360 mm

Dimensions: 184 (W) × 184 (H) × 335.5 (D) mm

VPDL-Z1019 (71⁄4 × 71⁄4 × 131⁄4 inches)
Projection Lens for VPD-LE100 Mass: 6.5 kg (14 lb 5 oz)
•1.2 times zoom standard focus lens

Lens: f44.6-54.5 mm/F3.0

Screen coverage:
70-700 inches
Throwing distance:
(5:4)
100-inch: 3840-4660 mm
200-inch: 7740-9480 mm
300-inch: 11630-14190 mm
(4:3)
100-inch: 4100-4980 mm
200-inch: 8250-10060 mm
300-inch: 12410-15150 mm

Dimensions: 184 (W) × 184 (H) × 285.7 (D) mm

VPDL-Z1023 (71⁄4 × 71⁄4 × 111⁄4 inches)
Projection Lens for VPD-LE100 Mass: 6.5 kg (14 lb 5 oz)
•1.6 times zoom middle focus lens

Lens: f54.5-87.0 mm/F3.0

Screen coverage:
70-700 inches
Throwing distance:
(5:4)
100-inch: 4610-7390 mm
200-inch: 9380-15000 mm
300-inch: 14150-22600 mm
(4:3)
100-inch: 4930-7900 mm
200-inch: 10010-16010 mm
300-inch: 15100-24120 mm

–185–
 2-7 Projector lenses
Dimensions: 184 (W) × 184 (H) × 383 (D) mm
VPDL-Z1037 (71⁄4 × 71⁄4 × 151⁄8 inches)
Projection Lens for VPD-LE100 Mass: 8.5 kg (18 lb 11 oz)
•1.8 times zoom long focus lens

Lens: f87.0-152.3 mm/F3.0

Screen coverage:
70-700 inches
Throwing distance:
(5:4)
100-inch: 7430-13040 mm
200-inch: 15050-26370 mm
300-inch: 22670-39700 mm
(4:3)
100-inch: 7940-13930 mm
200-inch: 16070-28150 mm
300-inch: 24200-42360 mm
PRODUCTS
DISPLAY

–186–
3-1 JJTRON

ADN-8080 (PAL/NTSC/SECAM)
JJTRON Display System
•16:9 aspect, 80-inch LED-based display for indoor
advertising •8 mm pitch Surface Mounted Device type LEDs,
with each pixel made up of individual R, G and B LEDs •High
brightness of 1,000 cd/m2 for indoor use •224 x 120 pixel
resolution •Signal processor and screen in one “Plug and
Play” system •High contrast and reliability assured with the
“Black Mask” on the screen surface •Lightweight and
compact •Full 10-bit digital processing (1024 colour
gradation) •Advanced colour reproduction with the colour
compensation circuit •On-screen menu for adjustment/setting
•Various remote control capabilities: supplied remote
commander RM-JJ100, Control S and RS-422
Supplied accessories: Remote commander RM-JJ100
Remote control cable (15 m)
Optional accessory: Video input board BKJ-100
Remote control receiver RM-PJ10

Specifications
Picture performance
Device: Full color one-chip SMD type LED
Pixel pitch: 8 mm × 8 mm
Viewable picture area: 1792 (W) × 960 (H) mm (705⁄8 × 377⁄8 inches)
2033 mm (measured diagonally) (80 inches)
Aspect ratio: 16:9
Color system: PAL/NTSC/SECAM automatic switching
(When BKJ-100 is attached)
Brightness: 1,000 cd/m2 (white peak initial value)

PRODUCTS
Pixel density: 15,625 pixels/m2

DISPLAY
Number of pixels (RGB trio):
224 (W) × 120 (H) = 26,880 dots
Colour temperature: 7000 K
Signal processing: Full 10 bit
Viewing angle: Horizontal 145°
Vertical 145°
LED half brightness period:
40000 H (Video), 70000 H (All white)
General
Dimensions: 1880 (W) × 1060 (H) × 260 (D) mm (approx.)
(741⁄8 × 413⁄4 × 101⁄4 inches)
Current consumption: Max. 12 A
Power requirements: AC 200 to 240 V ±10%, 50/60 Hz
Mass: 110 kg (approx.) (50 lbs)
Waterproofing: Not applicable (indoor use only)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85% (without condensation)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90% (without condensation)
Inputs
INPUT A:
Frequency (fH/fV): 31.25 kHz/50 Hz, 31.5 kHz/60 Hz
Double scanned RGB:
BNC × 5 INPUT B (when BKJ-100 is attached):
R: 0.7 Vp-p ±2 dB positive, 75 Ω terminated Frequency (fH/fV): 15.625 kHz/50 Hz, 15.75 kHz/60 Hz
G: 0.7 Vp-p ±2 dB positive, 75 Ω terminated Composite video: BNC × 1, 1.0 Vp-p, sync negative, 75 Ω terminated
Sync on G: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated Analogue RGB/YUV: BNC × 5
B: 0.7 Vp-p ±2 dB positive, 75 Ω terminated R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
HD/COMP SYNC: G: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Composite sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω Sync on G/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
terminated B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Horizontal sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω HD/COMP SYNC:
terminated Composite sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
VD: terminated
Vertical sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω Horizontal sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated terminated
Remote: VD:
Control S IN/OUT: Mini jack, 5.0 Vp-p Vertical sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
RS-422 IN/OUT: D-sub 9-pin (Female) terminated

Regulation compliance
UL (1950), c-UL (CSA C 22.2 No. 950),
TUV (EN 60950), FCC Class A, IC Class A,
CE Class B, C-Tick, VCCI Class A, JEIDA

–187–
 3-2 JJTRON accessory

BKJ-100
JJTRON Accessory Board
•Video input board for ADN-8080
•Composite, YUV, RGB inputs

Dimensions: 41.5 (W) × 187 (H) × 55 (D) mm

(111⁄16 × 73⁄8 × 21⁄4 inches)
Mass: 200 g (7 oz)
PRODUCTS
DISPLAY

–188–
4. Others

DSC-1024HD
Digital Scan Converter
•Versatile upward and downward digital scan converter
•Input accepted in the 15.6 to 70 kHz horizontal frequency
range and the 50 to 120 Hz vertical frequency range and
output at an industry standard 15.6 kHz, 31.5 kHz, 33.75 kHz
(1080i*), 37 kHz, 48 kHz or 64 kHz frequency •Built-in
transcoder for universal conversions between video signal
formats •Genlock function is available •PAL/NTSC
conversion capability •Scan doubler capability •Automatic
input signal recognition •Variable offset sampling and high-
density vertical interpolation capability for conversion
resolutions •Adjustable aspect ratios •Built-in test pattern
generator •Zoom, pan and freeze frame functions provided
for easy operation •On-screen display for
adjustment/operation
* When a 1080i signal is output, a fV (60 Hz/59.94 Hz) is selectable on the on-screen
display menu.

Supplied accessories: D-sub 15-pin to 5 BNC cable (6 ft.)

Operation manual
Optional accessories: Rack mount bracket MB-510
D-sub 15-pin to 5 BNC cable SMF-400
D-sub 15-pin to D-sub 15-pin cable SMF-401
Remote commander RM-854, RM-PJ1292,
RM-PJ1001, etc.

Specifications

PRODUCTS
General Format conversion

DISPLAY
Power requirements: AC 220 to 240 V, 50/60 Hz Capture range: fH: 15.6 to 70 kHz, fV: 50 to 120 Hz
Power consumption: 30 W (max. power on), 3 W (typical power off) Sampling rate: 14.3 to 40 MHz offset phase max.
Operating temperature: 0 to 35 °C (32 to 96 °F) (Equivalent to 80 MHz sampling)
Dimensions: 424 (W) × 44 (H) × 354 (D) mm Output pixel clock: 14.3 to 50 MHz
(163⁄4 × 13⁄4 × 14 inches) Line doubler: Line doubled vertically for each field
Mass: 4.1 kg (9 lb 1 oz) Genlock Reference: Black/burst signal on VIDEO1 input
Applicable to PAL/NTSC outputs only
Input connector Genlock ON/OFF, SCH adjustment
Video 1: Composite: Loop-through BNC Picture adjustment: CONTRAST/PHASE (except for GBR/YBR/PAL)/
S Video: Loop-through Mini DIN 4-pin CHROMA (except for GBR)
Video 2: Composite (composite/-/-), SIZE/CENTER/ZOOM (×2, ×3, ×4)/APERTURE
Component (G/B/R, Y/B-Y/R-Y): Loop-through D-sub (ON/OFF)/STILL (ON/OFF)
15-pin
Video 3: Component (G/B/R, Y/B-Y/R-Y): Loop-through D-sub Regulation compliance
15-pin Europe: GS mark (EN 60 950/1992)
Audio1/2/3: L/R RCA jack CE mark (EN 55 022/1994 class B,
EN 50 082-1/1992, EN 61000-3-2/1995)
Output connector Nordic: DEMKO/SEMKO/NEMKO/FIMKO safety approvals
Video out: Composite: BNC
S Video: MINI DIN 4-pin
Component (G, B, R, B-Y/R-Y):
D sub 15-pin
Audio: L/R RCA jack

Signal level
Composite: 1.0 Vp-p (typical), (Video 1: Automatic 75 Ω
termination, Video 2: 75 Ω/Hi-Z)
S Video: Y: 1.0 Vp-p (typical), sync negative
C: 0.3 Vp-p (PAL)/0.286 Vp-p (NTSC) (typical)
Automatic 75 Ω termination
Component: G/B/R input: 0.714 Vp-p (typical) (Video 2:
auto sync, Video 3: sync on
G/external sync, switchable),
75 Ω/Hi-Z HV.sync/c.sync: 1.0 to
5.0 Vp-p
G/B/R output: 0.714 Vp-p (typical) (with
external sync), 75 Ω (typical)
HV.sync/c.sync: TTL
Y/B-Y/R-Y input: 0.7 Vp-p (typical) (PAL/NTSC,
sync on Y), 75 Ω/Hi-Z
Y/B-Y/R-Y output: 0.7 Vp-p (typical) (with sync on
Y), 75 Ω (typical)

–189–
 4. Others

DSC-1024G
Digital Scan Converter
•Versatile upward and downward digital scan converter
•Input accepted in the 15.6 to 70 kHz horizontal frequency
range and the 50 to 120 Hz vertical frequency range and
output at an industry standard 15.6 kHz, 31.5 kHz, 37 kHz,
48 kHz or 64 kHz frequency •Built-in transcoder for universal
conversions between video signal formats •Genlock function
is available •PAL/NTSC conversion capability •Scan doubler
capability •Automatic input signal recognition •Variable offset
sampling and High-density vertical interpolation capability for
conversion resolutions •Adjustable aspect ratios •Built-in test
pattern generator •Zoom, pan and freeze frame functions
provided for easy operation •On-screen display for
adjustment/operation
Supplied accessories: D-sub 15-pin to 5 BNC cable (6 ft.)
Operation manual
Optional accessories: Rack mount bracket MB-510
D-sub 15-pin to 5 BNC cable SMF-400
D-sub 15-pin to D-sub 15-pin cable SMF-401
Remote commander RM-PJ1000, RM-PJ1292,
RM-1271, RM-PJM500, RM-PJM800, etc.

Specifications
General
Power requirements: AC 220 to 240 V, 0.25 A (max.), 50/60 Hz Regulation compliance
Power consumption: 30 W (max. power on), 3 W (typical power off) Europe: GS mark (IEC-950, TÜV)
Operating temperature: 0 to 35 °C (32 to 96 °F) CE mark (EN-60950/EN-5082/EN55022 class B)
PRODUCTS

Dimensions: 424 (W) × 44 (H) × 354 (D) mm Nordic: DEMKO/SEMKO/NEMKO/EI safety approvals
DISPLAY

(163⁄4 × 13⁄4 × 4 inches)

Mass: 4.1 kg (9 lb 1 oz)

Input connector
Video 1: Composite: Loop-through BNC
S Video: Loop-through Mini DIN 4-pin
Video 2: Composite: Loop-through BNC
S Video: Loop-through Mini DIN 4-pin
Video 3: Component (R/G/B, Y/R-Y/B-Y)
Loop-through D sub 15-pin
Audio1/2/3: L/R RCA jack

Output connector
Video out: Composite: BNC
S Video: MINI DIN 4-pin
Component (R/G/B, Y/R-Y/B-Y):
D sub 15-pin
Audio: L/R RCA jack

Signal level
Composite: 1.0 Vp-p (typical), Automatic 75 Ω termination
S Video: Y: 1.0 Vp-p (typical), sync negative
C: 0.3 Vp-p (PAL)/0.286 Vp-p (NTSC) (typical)
Automatic 75 Ω termination
Component: R/G/B input: 0.714 Vp-p (typical)(sync on
G/external sync, switchable),
75 Ω/Hi-Z
HV.sync/c.sync: 1.0 to 5.0 Vp-p
R/G/B output: 0.714 Vp-p (typical) (with
external sync), 75 Ω (typical)
HV.sync/c.sync: TTL
Y/R-Y/B-Y input: 0.7 Vp-p (typical) (PAL/NTSC,
sync on Y), 75 Ω/Hi-Z
Y/R-Y/B-Y output: 0.7 Vp-p (typical) (with sync on
Y), 75 Ω (typical)

Format conversion
Capture range: fH: 15.6 to 70 kHz, fV: 50 to 120 Hz
Sampling rate: 14.3 to 40 MHz offset phase max.
(Equivalent to 80 MHz sampling)
Output pixel clock: 14.3 to 50 MHz
Line doubler: Line doubled vertically for each field
Genlock Reference: Black/burst signal on VIDEO1 input
Applicable to PAL/NTSC outputs only
Genlock ON/OFF, SCH adjustment
Picture adjustment: CONTRAST/PHASE (except for RGB/YBR/PAL)/
CHROMA (except for RGB)
SIZE/CENTER/ZOOM (×2, ×3, ×4)/APERTURE
(ON/OFF)/STILL (ON/OFF)

–190–
SECTION 6 STILL IMAGE PRODUCTS
1. Digital instant pass photo system
UPX-C21.........................................................192
2. Printers
2-1. Digital colour printers
UP-D70A.........................................................193
UP-D70XR ......................................................194
UP-D6500/D6400/D6300................................195
UP-D5500 .......................................................196
UP-DP10.........................................................197
UP-D2600S.....................................................198
UP-D2600 .......................................................199
UP-D2500 .......................................................200
UP-D890 .........................................................201
2-2. Colour video printers
UP-7300MDP..................................................202
UP-5600MDP..................................................203
UP-2850P/2800P............................................204
UP-2330P/2300P............................................205
UP-2100P .......................................................206
2-3. Monochrome video graphic printers
UP-980CE.......................................................207
UP-960CE.......................................................208
UP-895CE.......................................................209
2-4. Printer accessories.........................................210

3. Film scanner
3-1. Film scanner
UY-S90 ...........................................................224
3-2. Film scanner accessories...............................225

4. Digital print server

UPA-D3...........................................................226

STILL IMAGE
PRODUCTS
5. Digital still camera/recorder
5-1. Digital still camera
DKC-ST5 ........................................................227
DKC-5000 .......................................................228
DKC-CM30 .....................................................229
DKC-FP3 ........................................................230
5-2. Digital still recorder
DKR-700P.......................................................231
5-3. Digital still camera/recorder accessories........232

–191–
 1 Digital instant pass photo system

UPX-C21
Digital instant pass photo system
•High quality prints suitable for ID (Identification)
photographs
•Image can be checked on the LCD monitor before printing
•Alternative operating methods (no PC required)
•docking with the Camera Station
•via Camera Station RS-232C port, without docking
Supplied accessories: Operation manual (1)
Set up/Quick reference sheet (1)
Interface cabel (1)
AC adaptor (1)
AC power cable for printer (1)
AC power cable for AC adaptor (1)
Paper tray (for UPC-2040A/2045/2070E) (1)
Paper tray (for UPC-20S16/20S04/20S01/2010/
2020) (1)
Paper cover (1)
Roller cleaning kit (1)
Lithium ion battery NP-F550 (1)

Optional accessories: Self-laminating colour printing pack UPC-2040A

(for 120 prints)
Self-laminating colour printing pack UPC-2045
(for 120 prints)
Colour postcard printing pack UPC-2070E
(for 150 prints)
16-split Self-adhesive pre-cut colour printing pack
UPC-20S16 (for 200 prints)
4-split Self-adhesive pre-cut colour printing pack
UPC-20S04 (for 200 prints)
Self-adhesive colour printing pack UPC-20S01
(for 200 prints)
Colour printing pack UPC-2010 (for 200 prints)
Black and white printing pack UPC-2020
(for 200 prints)
Remote control unit RM-91
Paper ejector UPA-2001
STILL IMAGE

Roller cleaning kit UPA-2003

PRODUCTS

AC adaptor PCS-AC08

Specifications
UPX-C21 (Docking Station)
Safety standards: EN60950, EN61000-3-2, EN61000-3-3, UL 1950, Dimension: 208 (W) × 44 (H) × 188 (D) mm
CSA C22.2 No. 950 (81⁄4 × 13⁄4 × 71⁄2 inches)
EMC: EN50081-1 class B, EN50082-1 class B, Mass: Approx. 550 g (1 lb 3 oz)
AS/NZS-4251.1, AS/NZS-4252.1,
FCC PART15 Class A Digital Equipment, (Printer)
IC ES-003 Class A Digital Equipment Printing method: Dye transfer sublimation thermal printing
Resolution: 310 dpi
(Digital Camera) Gradation: 256 levels each for Yellow, Magenta and Cyan
Imager: 1/2.7-inch IS CCD with 1,300,000 pixels (16.7 million colours per dot)
Data size: SXGA Paper tray capacity: 200 sheets
Compression: JPEG Power requirement: 220 to 240V, 50/60Hz
Memory: Internal memory Power consumption: Approx. 1.0A
Image capacity: Hi1: Minimum 5 images(SXGA) Printing time: Approx. 97 seconds (UPC-2040A)
Hi2: Minimum 10 images(SXGA) Approx. 70 seconds (UPC-2045)
S: 30 images(VGA) Approx. 50 seconds
White balance: (UPC-2070E/20S16/20S04/20S01/2010/2020)
Internal flash mode: AWB/Manual (4,000/4,400/4,800/5,200/5,600/6,000/ Dimension: 370 (W) × 125 (H) × 417 (D) mm
Auto/One push W.B) (145⁄8 × 5 × 161⁄2 inches)
External flash mode: Manual (4,000/4,400/4,800/5,200/5,600/6,000/6,500/ Mass: 9.5 kg (23 lb 2 oz)
7,000K)
Lens: Zoom (12 mm-15.6 mm)
Iris: 2 position F4.7 (T)-F4 (W), F13.5 (T)-F11.4 (W)
Auto exposure: Except external flash light
Focus: Auto focus(0.8 m and over)
Flash: Internal flash (with Defuser, GN9), X terminal,
Hot shoe
Data transfer time (Camera-Docking station):
Approx. 5 sec (VGA mode)
Shutter speed: Auto, 1/250 seconds (External flash mode)
Sensitivity: ISO 100 equivalent
LCD display: 1.8-inch TFT colour LCD (Angle adjustable)
Optical view finder: Equipped
Digital interface: RS-232C (to Docking Station or PC)
Video output: Composite video (1)
Power supply: Lithium Ion Battery, DC IN 8.4V
Battery charge: on Docking Station
Power save mode: Equipped
Dimensio: 219 (W) × 200 (H) × 71 (D) mm
(85⁄8 × 77⁄8 × 27⁄8 inches)
Mass: Approx. 1 kg (2 lb 3 oz)

–192–
2-1 Digital colour printers

UP-D70A
Digital colour printer
•Photo quality and high speed digital colour printing with
300dpi •256 gradations and over 16 million colour
reproduction per pixel •A4 size print (210 × 297mm/8 3⁄8 ×
11 3⁄4 inches) in approx. 85 seconds (Approx. 55 seconds in
the 150 dpi print mode) •Provides superb bit-map printing
through a SCSI and Centronics interface facility •Full-bleed
A4 size (216 × 297mm/8 5⁄8 × 11 3⁄4 inches) image printing
•Grey balance adjustments for delicate grey colour
reproduction •Colour management by ICC profiles
•A wide range of optional accessories including printer driver
software, add-on memory, for easy system expansion
•Compatibility with Windows® 95/98/NT and Macintosh® OS
Supplied software* (provided by hybrid CD-ROM)
Printer driver (SCSI, Centronics) for Windows for
Work Groups 3.11, Windows 3.1, Windows 95/98
Printer driver (SCSI) for Windows NT4.0
Chooser driver for Mac OS
Photoshop plug-in (SCSI, Centronics) for Windows for
Work Groups 3.11, Windows 3.1, Windows 95/98
Photoshop plug-in (SCSI) for Windows NT4.0
Photoshop plug-in for Mac OS
Test chart data for grey balance adjustment
(TIFF and Photoshop format)
ICC profiles
Supplied accessories: Ink Ribbon Holder
Paper Tray
Paper Cover
AC Power Cable
Operation Manual
Fan Filter
Thermal Head Cleaning Kit
Optional Print Packs: A4 size self-laminating colour print UPC-740
A4 plus size self-laminating colour print pack
UPC-747
A4 size colour print pack UPC-8810

STILL IMAGE
PRODUCTS
A4 plus size colour print pack UPC-8817
A4 size B&W print pack UPC-8820
A4 size seif-laminating colour print pack UPC-8840A

Specifications
Printing Method: Dye transfer sublimation thermal printing
Resolution: 300 dpi or 150 dpi selectable
Gradations: 256 levels each for YMC
(16.7 million colours per dot)
Paper Tray Capacity: 100 sheets
Effective Print Pixels: A4 Size: 300 dpi; 2,400 × 3,208 dots
Interface: SCSI and Centronics
150 dpi; 1,200 × 1,604 dots
Picture Memory: 30MB
A4 Plus Size: 300 dpi; 2,550 × 3,508 dots
Power Requirements: AC220 to 240V, 50/60Hz
150 dpi; 1,275 × 1,754 dots
Power Consumption: Max. 260W
Print Area: A4 Size: 203.2 × 271.6 mm
Less than 30W (Stand-by mode)
(8 × 10 3⁄4 inches)
Dimensions: 493.8(W) × 189(H) × 468.8(D)mm
A4 Plus Size: 216× 297 mm
(19 1⁄2 × 7 1⁄2 × 18 1⁄2 inches)
(8 5⁄8 × 11 3⁄4 inches)
Mass: 19 kg (41 lb 14 oz)
Paper Area: A4 Size: 210 × 297 mm
Safety Standards: EN60950
(8 3⁄8 × 11 3⁄4 inches)
A4 Plus Size: 222 × 322.4 mm
(8 7⁄8 × 12 3⁄4 inches)
Printing Time: Standard Laminating
(Colour) A4 Size: 300 dpi; 85 sec. 115 sec.
150 dpi; 55 sec. 85 sec.
A4 Plus Size: 300 dpi; 90 sec. 130 sec.
150 dpi; 60 sec. 95 sec.
Printing Time: Standard
(B/W) A4 Size: 300 dpi; 55 sec.
150 dpi; 35 sec.

* Printer driver for Silicon graphics WS is provided as freeware from SonyDrive.

The newest driver software is provided at the following address: http://www.sony.co.jp/DP-driver-E.

–193–
 2-1 Digital colour printers

UP-D70XR
Digital medical printer
•Designed to achieve optimum print quality from digital
medical modalities with both colour and greyscale outputs
•X-ray images are clearly reproduced on the UPT-730BL
Blue Thermal Transparent Film •Prints X-ray images out in
just 44 seconds (using UPT-730BL Blue Thermal Film)
•Photo quality colour printing with dye sublimation printing
technology •Colour A4 size image is printed out in
approximately 85 seconds (in 300 dpi mode) or 55 seconds
(in 150 dpi mode) or 115 seconds on lamination media
•Complies with DICOM* standard with optional UPA-D3
Digital Print Server •Can daisy chain up to six printers and
receive data or commands on TCP/IP protocols •Grey
balance adjustments for delicate grey colour reproduction
•Detachable dust filter •Environmentally friendly dry printer
which requires neither liquid chemicals nor the use of heavy
metals such as silver •Complies with the Energy Star
Program, with a power consumption in stand-by mode of
less than 30 W •Provides superb bit-map printing through a
SCSI and Centronics interface facility •Compatible with
Windows 95/98, Windows NT 4.0 and Macintosh OS
•Complies with the MDD
* DICOM (the Digital Imaging Communication in Medicine) is standardised by ACR (The
American College of Radiology) and NEMA (the National Electrical Manufactures
Association).

Supplied software (provided by hybrid CD-ROM):

Printer Driver (SCSI, Centronics) for Windows for
Work groups 3.11, Windows 3.1, Windows 95/98
Printer Driver (SCSI) for Windows NT 4.0
Chooser Driver for Mac OS
PhotoShop plug-in (SCSI, Centronics) for Windows for
Printing Time (Colour): Standard Laminating
Work groups 3.11, Windows 3.1, Windows 95/98
A4 Size: 300 dpi; approx. 85 s approx. 115 s
PhotoShop plug-in (SCSI) for Windows NT 4.0
STILL IMAGE
PRODUCTS

150 dpi; approx. 55 s approx. 85 s

PhotoShop plug-in for Mac OS
A4 Plus Size: 300 dpi; approx. 90 s
Test chart data for grey balance calibration (TIFF
150 dpi; approx. 60 s
and PhotoShop format)
ICC Profiles
Printing Time (B/W): Standard
Supplied accessories: Ink Ribbon Holder (1)
A4 Size: 300 dpi; approx. 55 s
AC Power Code (1)
150 dpi; approx. 35 s
Fan Filter (1)
Paper Tray (1)
Printing Time (UPT-730BL): Standard
Paper Cover (1)
A4 Size: 300 dpi; approx. 44 s
CD-ROM* (1)
Bottom Cover (1)
Memory: 30 MB
Operation Manual (1)
Interface: SCSI, Centronics
Thermal Head Cleaning Kit
Paper tray capacity: 100 sheets (max.)
Optional accessories: DICOM Print Server UPA-D3
Power consumption: 270 W (UC) (max.)
Optional Print Packs: A4 Size Colour Print Pack (100 prints) UPC-8810
260 W (CE) (max.)
A4 Size B/W Print Pack (100 prints) UPC-8820
Less than 30 W (stand-by mode)
A4 Size Self-laminating Colour Print Pack (72 prints)
Power requirements: AC 220 to 240 V, 50/60 Hz (CE)
UPC-740
Dimensions: 493.8* (W) × 189 (H) × 468.8 (D) mm
A4 Size Thermal Blue Transfer Film (100 prints)
(19 1⁄2* × 7 1⁄2 × 18 1⁄2 inches)
UPT-730BL
(*502.3 mm (19 3⁄4 inch) with fan filter)
A4 Plus Size Colour Print Pack (100 prints)
Mass: 19 kg (41 lb 14 oz)
UPC-8817
Safety standards: EN60950, EN60601-1, MDD, CE mark

Specifications
Printing Method: Dye-Sublimation Printing (Colour & B/W)
Direct Thermal Printing (UPT-730BL)
Resolution: 300 dpi / 150 dpi selectable
Gradation: 256 levels each for Yellow, Magenta and Cyan
Effective Print Pixels:
A4 Size: 300 dpi; 2,400 × 3,208 dots
150 dpi; 1,200 × 1,604 dots
A4 Plus Size: 300 dpi; 2,550 × 3,508 dots
150 dpi; 1,275 × 1,754 dots
Print Area:
A4 Size: 203.2 × 271.6 mm (8 × 10 3⁄4 inches)
A4 Plus Size: 216 × 297 mm (8 5⁄8 × 11 3⁄4 inches)
Paper Size:
A4 Size: 210 × 298 mm (8 1⁄4 × 11 3⁄4 inches)
A4 Plus Size: 222 × 322.4 mm (8 3⁄4 × 12 3⁄4 inches)

–194–
2-1 Digital colour printers

UP-D6500/D6400/D6300
Digital colour printer
•Superb quality digital colour printer for ID card production
•Dual-side printing (ISO 7810 standard card) •Quick data
download and high speed thermal lamination process —
45 s with CMYL ribbon •SCSI-2 high-speed interface for
high volume applications (UP-D6500) •Magnetic stripe
encoding (UP-D6500/D6400) •Anti-forgery security
lamination •Template memory*1 feature (UP-D6500/D6400)
•Holds up to approx. 125*2 (UP-D6500: 250*3) cards in the
optional card feeder and card stacker •Compatibility with
Windows® 95/98*4 and NT OS
Supplied accessories: Floppy Disk (1)
UP-D6500 with UPA-6003 Auto Card Feeder
AC Power Cable (1)
Card Tray (1)
Operational Manual (1)
Ink Ribbon Holder (1)
Cleaning Roller Holder Set (1)
Consumables: 5UPR-6040 Colour Ink Ribbon (CMYL)
250 prints × 5 rolls
5UPR-6080 Colour Ink Ribbon (CMYKL)
200 prints × 5 rolls
UPR-6025 Black and White Ribbon (K) Approx.
1000 prints × 1 roll
Optional accessories: UPA-6002 Auto Card Stacker
UPA-6003 Auto Card Feeder
UPU-D65H Thermal Head
UP-D6500 UP-D6400/D6300

Specifications
Printing method: Dye transfer sublimation thermal printing
Resolution: 300 dpi
Gradation: 256 gradations for Yellow, Magenta and Cyan
Printing time: Approx. 45 seconds per side with CMYL ribbon
Interface: SCSI-2 (UP-D6500 only), IEEE standard 1284
Card supply*2: Approx. 125 cards with the optional UPA-6003
Auto Card Feeder
(UP-D6500: 250 cards when using two of the optional

STILL IMAGE
PRODUCTS
UPA-6003 Auto Card Feeder)
Card stack*2: Approx. 125 cards with the supplied card tray
(UP-D6500: 250 cards when using the optional
UPA-6002 Auto Card Stacker)
Power requirements: 220 to 240V, AC 120 V, 50/60 Hz
Power consumption: AC 220 to 240V : 170 VA, AC 120 V : 130 VA
Dimensions: 350 × 260 × 257 mm
(13 7⁄8 × 10 1⁄4 × 10 1⁄8 inches)
Mass: 11.5 kg (25 lb 6 oz)
Safety regulations: EN 60950

Acceptable PVC Cards Specifications

Length: 85.47 to 93.00 mm (3 3⁄8 × 3 21⁄32 inches)
Height: 53.92 to 60.00 mm (2 1⁄8 × 2 11⁄32 inches)
Thickness*5: 0.3 to 1.5 mm (12 × 59 mils)
Colour: Any colour card acceptable (except transparency)
Surface Material: Dye sublimation compatible PVC (unlaminated)
Surface: Gloss finish (polished)
Other: No residue, dust or blemishes allowed
Magnetic stripe encoding standards:
ISO / IEC7811-2, -4, -5, -6
Coercivity 300/2750/4000 Öe
Smart card encoding standards:
ISO / IEC7816-1, -2, -3, -4
EMV, Protocol T=1.0

*1 For details, please consult your nearest Sony office.

*2 In case of the card thickness is 0.76 mm.
*3 In case of the card thickness is 0.76 mm and combining optional UPA-6002 Auto Card Stacker with two of UPA-6003 Auto Card Feeder.
*4 Can be operated using the Windows 95 driver software.
*5 The initial setting is 0.76 mm. Some adjustments may be required.

–195–
 2-1 Digital colour printers

UP-D5500
Digital colour printer
•Dye transfer sublimation thermal printing for photo-quality
prints with over 16 million colour reproduction •A high
resolution of 300dpi provided by a high resolution thermal
head with 2048 elements •A5 size colour prints provided in a
mere 40 seconds •SCSI and IEEE-1284 (supporting the
ECP mode) interfaces for mutual communication between
the printer and the connected equipment •Compact and
convenient operating design •Compatibility with Windows®
95/98*/NT and Macintosh® OS •Complies with the MDD
Supplied accessories: Ink ribbon holder
Paper tray
Paper cover
AC power cable
Operational manual
Colour print pack (for 20 prints)
Printer driver disk for Windows 95 and Macintosh
computers
Optional accessories: Colour printing pack (ink ribbon holder not included)
UPC-5510
Colour printing pack (ink ribbon holder not included)
5UPC-5510
Colour printing pack UPC-5510C
Additional ink ribbon holder UPA-5500

Specifications
Printing Performance
Printing Method: Dye transfer sublimation thermal printing
Thermal Head: 2048 dots (300dpi)
Gradation: 256 level each for Yellow, Magenta and Cyan
(16.7 million colors per dot)
Effective Print Pixels: 1,536 × 2,408 dots
Print Area: 132.1 × 176.1mm
(5 1/4 × 7 inches)
Printing Time: Approx. 40 sec.
2048 × 2048 × 8 bit per R/G/B
STILL IMAGE

Picture Memory:
PRODUCTS

Interface Port: SCSI

IEEE-1284

General
Paper Tray Capacity: 100 sheets
Power Requirements: AC 100 to 240V, 50/60Hz
Power Consumption: Max. 250W
Dimensions: 424(W) × 125(H) × 475(D)mm (excluding projecting parts)
(163/4 × 5 × 183/4 inches)
Mass: 17kg (37 lb 11 oz)
Safety Standards EN60950, EN60601-1, MDD

* Can be operated using the Windows 95 driver software. For operation details, please consult your nearest Sony office.

–196–
2-1 Digital colour printers

UP-DP10*
Digital photo printer
•Dye transfer sublimation thermal printing for photo-quality
prints with over 16 million color reproduction •Printing time is
approx. 85 seconds with the high resolution of approx. 300
dpi •Full-bleed image printing is available with the optional
color print pack UPC-10P23E and UPC-10P34 by tearing off
the border tabs along the perforations •4 x 6 inch size
printouts with UPC-10P23E which can be used as
postcards. •4 x 5 3/8 inch size printouts with UPC-10P34
•Three patterned laminations: glossy, matte and texture
•Compact and unique design which can be set vertically or
horizontally •Equipped with IEEE-1284 (Compatible, Nibble,
ECP) and USB (ver.1.0) interface. •Bundled with the driver
software which applies Auto Color Adjustment Function for
brightness and color balance •Bundled with the application
software
Supplied accessories: CD-ROM (1)
Power Code (1)
Paper Tray (1)
Operation Manual (1)
Optional accessories: Self-laminating Color Print Pack UPC-10P23E
(for 25 prints)
Self-laminating Color Print Pack UPC-10P34
(for 25 prints)
Self-laminating Sticker Print Pack UPC-10S01
(for 25 prints)

Specifications
Printing method: Dye transfer sublimation thermal printing
Resolution: Approx. 300 dpi
Gradations: 256 gradations for yellow, magenta, cyan
Over 16.7 million colors per dot
Picture elements: 1,162 × 1,765 dots (UPC-10P23E)
1,162 × 1,563 dots (UPC-10P34)

STILL IMAGE
PRODUCTS
1,162 × 1,800 dots (UPC-10S01)
Paper size: 180 × 100 mm (UPC-10P23E, UPC-10P34,
UPC-10S01)
(7 1/8 × 4 inches)
Print size: 152 × 100 mm (UPC-10P23E, UPC-10S01)
(6 × 4 inches)
134 × 100 mm (UPC-10P34)
(5 3/8 × 4 inches)
Printing time: Approx. 85 s / sheet
Interface: USB (ver 1.0)
IEEE-1284 (Compatible, Nibble, ECP)
Paper capacity: 25 sheets
Supplied printer driver software:
Windows 95/98, Mac OS 8.6 or later
Power requirements: Approx. 0.5 A / 220 to 240 V
Dimensions: 208 (W) × 71 (H) × 303 (D) mm
(81⁄4 × 27⁄8 × 12 inches)
Mass: Approx. 2.7 kg (20 lb 15 oz)

* This product is not available in some areas.

–197–
 2-1 Digital colour printers

UP-D2600S
Digital colour printer
•Photo-quality prints with Sony dye transfer sublimation
thermal printing technology with over 16 million color
variations •Advanced thermal head provides 310 dpi (dots
per inch) high resolution and the digital process provides
high-quality prints with a maximum of 1365 (H) x 1024 (V)
dots (standard) and 1646 (H) x 1024 (V) dots (large) •By
using the optional UPC-2045 Self-laminating Color Print
Pack, the prints are outputted with a laminating layer with
three types of finishes: Glossy, Texture and Matte •ICC
profiles supplied •Near A6-size print (130 x 88 mm (5 1/8 x 3
1/2 inches)) can be printed in approximately 50 seconds
•Laminated type (UP-2045) can be printed out in 70 seconds
•Equipped with a SCSI-2 interface which enables fast data
transfer at up to 10 MB/s and allows multiple printers to be
used •Three color plane memories to free the computer after
the image is transferred to the printer •Compatible with
Windows NT 4.0, Windows 95/98 and Macintosh OS
•Picture scaling function •200 (standard) /150 (large)-sheet
paper feed capacity •Front panel operation •Complies with
the MDD
Supplied accessories: AC Power Cable (1)
Paper Tray (2) (Standard and Large)
Paper Cover (1)
Roller Cleaning Kit (1)
Operation Manual (1)
CD-ROM with printer driver included (1)
(for Windows 95/98, Windows NT 4.0, Mac OS 8.0
or later and Photoshop plug-in for both Windows
and Macintosh platforms)
Optional accessories Color Printing Pack UPC-2010 (for 200 prints)
Black and White Printing Pack UPC-2020
(for 200 prints)
STILL IMAGE

Self-laminating Color Printing Pack UPC-2045

PRODUCTS

(for 120 prints)

Self-laminating Color Printing Pack UPC-2040A
(for 120 prints)
Color Postcard Printing Pack UPC-2070E
(for 150 prints)
16-split Self-adhesive Pre-cut Color Printing Pack
UPC-20S16 (for 200 prints)
4-split Self-adhesive Pre-cut Color Printing Pack
UPC-20S04 (for 200 prints)
Self-adhesive Color Printing Pack
UPC-20S01 (for 200 prints)
Paper Ejector UPA-2001
Roller Cleaning Kit UPA-2003

Specifications
Printing method: Dye transfer sublimation thermal printing
Resolution: 310 dpi or 155 dpi selectable
Gradation: 256 gradations for Yellow, Magenta, Cyan
Over 16.7 million colors per dot
Printing paper size: UPC-2010/2020/20S01/20S04/20S16: 130 × 88 mm
(5 1⁄8 × 3 1⁄2 inches)
UPC-2045/2040A/2070/2070E: 148 × 100 mm
(5 7⁄8 × 4 inches)
Printed picture size: Standard: max. 112 × 84 mm (4 1⁄2 × 3 3⁄8 inches)
Large: max. 135 × 84 mm (5 3⁄8 × 3 3⁄8 inches)
Picture elements: Standard: 1365 × 1024 dots
Large: 1646 × 1024 dots
Picture memory: 3 color planes (6 MB)
Printing time: Approx. 50 seconds
(When using the UPC-2045: Approx. 70 seconds,
UPC-2040A: Approx. 97 seconds)
Interface port: SCSI-2
Paper tray capacity: Standard size paper tray: 200 sheets
(UPC-2010/2020/20S01/20S04/20S16)
Large size paper tray: 120 or 150 sheets
(UPC-2045/2040A/2070/2070E)
Picture scaling function: VGA mode (640 × 480 dots), SVGA mode (800 × 600
dots), XGA mode (1,024 × 768 dots)
Power requirements: 220 to 240 V, 50/60 Hz
Power consumption: Approx. 1.0 A / 220 V
Dimensions: 370 (W) × 125 (H) × 417 (D) mm
(14 5⁄8 × 5 × 16 3⁄4 inches)
Mass: Approx. 9.5 kg (20 lb 15 oz)
Safety regulations: EN60950, EN60601-1, MDD, CE mark

–198–
2-1 Digital colour printers

UP-D2600
Digital colour printer
•Photo-quality prints with Sony dye transfer sublimation
thermal printing technology with over 16 million color
variations •Advanced thermal head provides 310 dpi (dots
per inch) high resolution and the digital process provides
high-quality prints with a maximum of 1365 (H) x 1024 (V)
dots (standard) and 1646 (H) x 1024 (V) dots (large) •By
using the optional UPC-2045 Self-laminating Color Print
Pack, the prints are outputted with a laminating layer with
three types of finishes: Glossy, Texture and Matte •ICC
profiles supplied •Near A6-size print (130 x 88 mm (5 1/8 x 3
1/2 inches)) can be printed in approximately 50 seconds
•Laminated type (UP-2045) can be printed out in 70 seconds
•Equipped with a Parallel (IEEE-1284) interface •Supports
the bi-Centronics ECP mode •Three color plane memories to
free the computer after the image is transferred to the printer
•Compatible with Windows NT 4.0, Windows 95/98 •Picture
scaling function •200 (standard) /150 (large)-sheet paper
feed capacity •Front panel operation •Complies with the
MDD
Supplied accessories: AC Power Cable (1)
Paper Tray (2) (Standard and Large)
Paper Cover (1)
Roller Cleaning Kit (1)
Operation Manual (1)
CD-ROM with printer driver included (1)
(for Windows 95/98, Windows NT 4.0 and
Photoshop plug-in for Windows 95/98)
Optional accessories Color Printing Pack UPC-2010 (for 200 prints)
Black and White Printing Pack UPC-2020
(for 200 prints)
Self-laminating Color Printing Pack UPC-2045
(for 120 prints)
Self-laminating Color Printing Pack UPC-2040A

STILL IMAGE
PRODUCTS
(for 120 prints)
Color Postcard Printing Pack UPC-2070E
(for 150 prints)
16-split Self-adhesive Pre-cut Color Printing Pack
UPC-20S16 (for 200 prints)
4-split Self-adhesive Pre-cut Color Printing Pack
UPC-20S04 (for 200 prints)
Self-adhesive Color Printing Pack
UPC-20S01 (for 200 prints)
Paper Ejector UPA-2001
Roller Cleaning Kit UPA-2003

Specifications
Printing method: Dye transfer sublimation thermal printing
Resolution: 310 dpi or 155 dpi selectable
Gradation: 256 gradations for Yellow, Magenta, Cyan
Over 16.7 million colors per dot
Printing paper size: UPC-2010/2020/20S01/20S04/20S16: 130 × 88 mm
(5 1⁄8 × 3 1⁄2 inches)
UPC-2045/2040A/2070/2070E: 148 × 100 mm
(5 7⁄8 × 4 inches)
Printed picture size: Standard: max. 112 × 84 mm (4 1⁄2 × 3 3⁄8 inches)
Large: max. 135 × 84 mm (5 3⁄8 × 3 3⁄8 inches)
Picture elements: Standard: 1365 × 1024 dots
Large: 1646 × 1024 dots
Picture memory: 3 color planes (6 MB)
Printing time: Approx. 50 seconds
(When using the UPC-2045: Approx. 70 seconds,
UPC-2040A: Approx. 97 seconds)
Interface port: IEEE standard 1284-1994 (Compatible, Compatible
Nibble and ECP modes)
Paper tray capacity: Standard size paper tray: 200 sheets
(UPC-2010/2020/20S01/20S04/20S16)
Large size paper tray: 120 or 150 sheets
(UPC-2045/2040A/2070/2070E)
Picture scaling function: VGA mode (640 × 480 dots), SVGA mode (800 × 600
dots), XGA mode (1,024 × 768 dots)
Power requirements: 220 to 240 V, 50/60 Hz
Power consumption: Approx. 1.0 A / 220 V
Dimensions: 370 (W) × 125 (H) × 417 (D) mm
(14 5⁄8 × 5 × 16 3⁄4 inches)
Mass: Approx. 9.5 kg (20 lb 15 oz)
Safety regulations: EN60950, EN60601-1, MDD, CE mark

–199–
 2-1 Digital colour printers

UP-D2500
Digital colour printer
•High quality print with digital process in the frame memory
in 8-bit/256 gradations and over 16 million colours per pixel
•High resolution of 310dpi, 1365(H) × 1024(V) dots •Near A6
size print (130 × 88mm/51⁄8 × 31⁄2 inches) in approx. 50
seconds •Easy-to-use operation with function menu display
on an associated monitor •Standard IEEE 1284 interface for
mutual communication between the printer and the
connected equipment •200 Sheets paper feed capacity
•Compatibility with Windows® 95/98/NT and Macintosh® OS
•Complies with the MDD
Supplied accessories: Colour printing pack (for 10 prints)
Paper tray (1)
Paper cover (1)
AC power cable
Operation manual
Printer driver for Windows 95/98 OS and Macintosh OS
Optional accessories: Colour printing pack UPC-2010 (for 200 prints)
Black and white printing pack UPC-2020
(for 200 prints)
Self-laminating colour printing pack UPC-2040A
(for 120 prints)
Colour postcard printing pack UPC-2070E
(for 150 prints)
Self-adhesive colour printing pack UPC-20S01
(for 200 prints)
16-split Self-adhesive pre-cut colour printing pack
UPC-20S16 (for 200 prints)
4-split Self-adhesive pre-cut colour printing pack
UPC-20S04 (for 200 prints)
Self-adhesive Color Printing Pack
UPC-20S01 (for 200 prints)
Paper ejector UPA-2001
Paper tray (for UPC-2040A and UPC-2070E)
UPA-2002
Interface cable (for Macintosh) UPZ-2000M
STILL IMAGE

Roller cleaning kit UPA-2003

PRODUCTS

Specifications
Printing method: Dye transfer sublimation thermal printing
Resolution: 310dpi or 155dpi selectable
Gradation: 256 gradations for Yellow, Magenta, Cyan
Over 16.7 million colours per dot
Printing paper size: 130 × 88 mm (51/8 × 31⁄2 inches)
(Self-laminating paper/Postcard: 148 × 100 mm)
Printed picture size: Max. 112 × 84 mm (41⁄2 × 33⁄8 inches)
Picture elements: 1365 × 1024 dots
Picture memory: Color plane (2MB)
Printing time: Approx. 50 seconds
(When using the UPC-2040A: Approx. 97 seconds)
Interface port: Parallel (IEEE standard 1284-1994)
(Compatible, Compatible Nibble and ECP modes)
Paper tray capacity: 200 sheets
Power requirements: 220 to 240V, 50/60Hz
Power consumption: Approx. 1.0A
Dimensions: 370(W) × 125(H) × 417(D) mm
(145⁄8 × 5 × 161⁄2 inches)
Mass: 9.5 kg (23 lb 2 oz)
Safety regulations: EN60950, EN60601-1 (TÜV), MDD

–200–
2-1 Digital colour printers

UP-D890
Digital graphic printer
•Monochrome digital graphic printer with 1024 picture
element (horizontally) and 256 steps of gradation •A fast
printing speed: approx 5.5 seconds •Compact (154 ç 106 ç
303mm/61/8 ç 41/4 ç 12 inches) and lightweight (3.6kg/7 lb
16 oz) •Conforms to the bi-Centronics standard for direct
connection to equipment such as a computer and electronic
microscope and mutual communication between the printer
and connected equipment •Panoramic-size printing capable
with an additional 4MB memory •Printing paper selectable
from UPP-110HA superior density type UPP-110HD high
density type or the UPP-110S normal type thermal paper
•Three gradations selectable; Soft, Standard and Hard
(when using the UPP-110HA or UPP-110HD high density
thermal paper) •Complies with the MDD

Supplied accessories: AC power cable

Paper roll UPP-110HA
Head cleaning sheet
Printer Driver for Windows 3.1/95
Operation manual
Optional accessories: Printing paper UPP-110S
High density printing paper UPP-110HD
Superior Density Printer Paper UP-110HA

Specifications
Thermal head: Thin film thermal head
1024 dots drive
Gradation: 256 grey levels
Printed picture size: 100 ç 100 mm ±1.5% (1024 × 1024 dots)
Printing speed: Approx. 5.5 s/print
Picture elements: 1024(H) ç 1024(V) dots
Interface connector: bi-Centronics standard
(IEEE STD P1284 Reverse-Nibble and ECP)

STILL IMAGE
PRODUCTS
36-pin Amphenol type
Power requirements: AC 220 to 240V/120V, 50/60Hz
Power consumption: Max. 120 W
Dimensions: 154(W) ç 106(H) ç 303(D) mm
(61/8 ç 41/4 ç 12 inches)
Mass: 3.6 kg (8 lb)
Safety regulations: EN60950, EN60601-1, MDD

–201–
 2-2 Colour video printers

UP-7300MDP
Colour video printer
•High quality full colour print with digital process in the frame
memory in 8-bit/256 gradations, and over 16 million colours
per pixel •Its thermal head, with 1280 picture element dots,
reproduces a high quality output with a resolution of 6.4
dots/mm •A4 size print (210 × 297mm/
83/8 × 113/4 inches) in approx. 125 seconds and a black and
white image in approx. 60 seconds •OHP transparency
prints for effective presentations •Multiscan capability; inputs
over a wide range of horizontal scanning frequencies- 15kHz
to 89kHz- is acceptable •Multiple inputs; four BNC
connectors for 625 analogue RGB signal input, DIN 4-pin for
Y/C input and a BNC connector for PAL composite signal
input, and DN 50-pin multiple connector for analogue RGB
high scan signal for connection with variety of computers
and HDVS with optional cables •Menu operation with the
function menu displayed on the printer’s LCD and on an
associated monitor •Set-up menu; horizontal and vertical
picture size, H/V picture shift, aspect ratio, etc. •Up to 20
copies of consective printing capable •Various print modes;
two, four, six, eight or sixteen different or duplicated image
memory prints (625 line video images), four or six different
image print mode (high scan images) •Remote control from
a supplied wired or wireless remote control unit, or an
extemal PC •Complies with the MDD
Supplied accessories: Remote control unit (wired/wireless)
Cable for remote control unit (5 m)
Ink ribbon holders for colour, B&W and OHP materials
Paper tray
Paper cover
Battery SUM-3 (2)
AC power cable
STILL IMAGE
PRODUCTS

Operation and instruction manual

Optional Accessories Colour print pack UPC-7010P (for 100 prints)
Black and white print pack UPC-7020 (for 100 prints)
OHP print pack UPC-7030 (for 100 prints)
RS-232C cross cable SMF-1015
Video interface cable for Macintosh UPZ-7000M
Video interface cable for IBM PS55, PS/2, PS/V
UPZ-7000I
Interface cable for workstation UPZ-7001, UPZ-7002,
UPZ-7003

Specifications
Printing method: Dye transfer sublimation thermal printing Output: RGB analogue for Hi-Scan or HDVS signal (DN 50-pin)*
Thermal head: 1280 elements (6.4 dots/mm) RGB: 0.7Vp-p, 75Ω
Printing paper size: A4 (210 × 297 mm83/8 × 113/4 inches) using the Sync: Through output
optional UPC-7010P RGB analogue signal (625 line scan) (BNC ×4)
Picture size: <625/50 line signal> RGB: 0.7Vp-p, 75Ω, unbalanced
Max. 184 × 241mm (71/4 × 9 1/2 inches) Sync: 1.0Vp-p, negative, 75Ω, unbalanced
<Hi-scan signal> S-Video (Y/C separate, DIN 4-pin S terminal)
Max. 190 × 246mm (71/2 × 93/4 inches) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
Gradations: 256 levels process (Yellow, Magenta, Cyan) C: 0.3Vp-p, 75Ω, unbalanced
over 16 million colours per pixel Composite video (BNC)
Scanning frequency: 15kHz to 89kHz CCIR/PAL 1.0Vp-p, sync negative, 75Ω, unbalanced
Picture memory: Six frame memories (9MB) Control terminal: RS-232C (D-sub 25-pin)
Printing time: Approx. 125 seconds - Colour, Macintosh II print REMOTE 1: Remote control jack (special mini)
Approx. 60 seconds - B & W print REMOTE 2: Foot switch jack (stereo mini)
Input: RGB analogue for Hi-Scan or HDVS signal*(DN 50-pin) Power requirement: AC 200 to 240V, 50/60Hz
RGB: 0.7Vp-p, 75Ω Power consumption: 290W
Sync: 1.0 to 5.0Vp-p, 75Ω Dimensions: 424(W) × 177(H) × 490(D)mm
RGB analogue (625 line system) signal* (BNC ×4) (163/4 × 7 × 193/8 inches)
RGB: 0.7Vp-p, 75Ω, unbalanced Mass: Approx. 19.2kg (42 lb)
Sync: 0.3 to 4.0Vp-p, negative, 75Ω, unbalanced Safety regulations: EN60950, EN6060-1, BZT, MDD
S-Video (Y/C separate, DIN 4-pin S terminal)
Y: 0.5 to 2.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC)
CCIR/PAL 0.5 to 2.0Vp-p, sync negative, 75Ω,
unbalanced

* Note: The UP-7300MDP can accept sync-on-G or external sync automatically.

–202–
2-2 Colour video printers

UP-5600MDP
Colour video printer
•High quality print with digital process in the frame memory
in 8-bit/256 gradations and over 16 million colours per pixel
•A thermal head with 2048 elements assures high quality
output with a resolution of 300 dots per inch •Four frame
memories (Eight frame memory is possible with optional
UPK-5500 frame memory board) •A5 size print (210 ×
148mm/83⁄8 × 57⁄8 inches) in approx. 34 seconds
•Easy-to-use menu operation with function menu display on
the printer’s LCD and on an associated monitor •Worldwide
use (accepts CCIR/PAL video, EIA/NTSC video, 625
analogue RGB, 525 analogue RGB) •Multiple video inputs;
analogue RGB, Y/C and composite video •Remote control
operation from optional wired/wireless remote control units
RM-5500/91 and foot switch FS-30 •RS-232C port for
external remote control from a PC •Full colour digital printing
is possible using the optional four frame memory board
UPK-5500 and SCSI interface board UPK- 5502SC which
includes A/D and D/A conversion function and printer driver
software •Multiple printing modes; 2,4,8 or 16 split print, UP-5600MDP with UPK-5502SC
2,4,8 or 16 duplicate image print, composite print •Up to 80
characters of caption setting •The input image from a
camera or a VTR can be displayed on an assosiated
monitor looping through the UP-5600MDP in the power off
mode •User-friendly operational design •Complies with the
MDD
Supplied accessories: AC power cable
Colour print pack (for 20 prints)
Paper tray
Paper cover
Ink ribbon holder
Operation manual

STILL IMAGE
PRODUCTS
Optional accessories: Four frame memory board UPK-5500
Digital interface board UPK-5502SC
Wired/Wireless remote commander RM-5500
Remote control unit RM-91
Foot switch FS-30
Colour printing pack UPC-5510/5UPC-5510*
Colour printing pack UPC-5510C
Cassette for UPC-5510/5UPC-5510 UPA-5500
CCIR/PAL or EIA/NTSC 1.0Vp-p, sync negative, 75Ω,
*The UPC-5510/5UPC-5510 is not supplied with a cassette.
unbalanced**
Output: 625 or 525 RGB analogue* (BNC × 4, R/G/B/Sync )
Specifications RGB: 0.7Vp-p, 75Ω, unbalanced
Sync: 1.0Vp-p, sync negative, 75Ω, unbalanced
Printing method: Dye transfer sublimation thermal printing S-Video (Y/C Separate, 4-pin S terminal)
Thermal head: 6.72 dots/mm (300dpi dots) CCIR/PAL
Printing paper size: 148 × 210mm (57/8 × 83/8 inches) Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
Picture size: 124.8 × 165.1mm (5 × 61/2 inches) - PAL Full Print Mode C: 0.3Vp-p, 75Ω, unbalanced
125.8 × 165.1mm (5 × 61/2 inches) - NTSC Full EIA/NTSC
Print Mode Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
132.1 × 176.1mm (51/4 × 7 inches) - Digital Printing C: 0.286Vp-p, 75Ω, unbalanced
(with optional UPK-5502SC) Composite video (BNC)
Picture elements: 1176 lines × 1920 dots - PAL Full Print Mode CCIR/PAL or EIA/NTSC 1.0Vp-p, sync negative,
976 lines × 1920 dots - NTSC Full Print Mode 75Ω, unbalanced**
1536 lines × 2048 dots - Digital Printing Interface: (with optional UPK-5502SC)
(with optional UPK-5502SC and UPK-5500) SCSI 1 channel
Gradations: 256 levels process (Yellow, Magenta, Cyan) 50-pin amphenol (×2)
Over 16 million colours per pixel Control terminal: Remote control jack (Special mini) for optional
Picture memory: 4 frame memories, 2048 × 1024 × 8 bits × 3 (6MB) RM-5500
8 frame memories with optional UPK-5500, Foot switch-1 (stereo mini)
2048 × 2048 × 8 bits × 3 (12MB) Foot switch-2 (D-sub 9-pin) for optional FS-30
Printing time: Approx. 34s - PAL Full Size Print Mode RS-232C interface port (D-sub 25-pin)
Approx. 30s - NTSC Full Size Print Mode Power requirement: AC220V to 240V, 50/60Hz
Approx. 38s - Digital printing with optional Power consumption: Max. 1.2A
UPK-5502SC Dimensions: 424(W) × 125(H) × 475(D)mm
Input: 625 or 525 RGB analogue* (BNC × 4, R/G/B/Sync) (163/4 × 5 × 183/4 inches)
RGB: 0.7Vp-p, 75Ω, unbalanced Mass: 14kg (30 lb 14oz)
Sync: 0.3 to 4.0Vp-p, sync negative, 75Ω, unbalanced Safety regulations: EN60601-1 (TÜV), MDD
S-Video (Y/C Separate, 4-pin S terminal) EMI regulations: EMC Directive
CCIR/PAL
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced Note: *The UP-5600MDP can accept sync-on-G or external sync
C: 0.3Vp-p, 75Ω, unbalanced automatically.
** CCIR/PAL or EIA/NTSC signals are selected using the
EIA/NTSC
input selector on the unit’s rear panel.
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.286Vp-p, 75Ω, unbalanced
Composite video (BNC)

–203–
 2-2 Colour video printers

UP-2850P/2800P
Colour video printer
•UP-2800P: one frame memory, UP-2850P: four frame
memories •High quality print with digital process in the frame
memory in 8-bit/256 gradations and over 16 million colours
per pixel •High resolution of 310dpi, 860(H) × 976(V) dots
•Near A6 size print (130 × 88mm/51⁄8 × 31⁄2 inches) in
approx. 35 seconds •Multiple print modes: split image,
duplicate image and Instant Pass Photo (IPP) Mode
•Easy-to-use operation with function menu display on the
built-in LCD or the associated monitor •Remote control
function by an optional foot switch FS-36, remote control
unit RM-91 or an external computer via an RS-232C
interface •Multiple video input: analogue RGB, Y/C and
composite video •200 Sheets paper feed capacity •Up to 48
characters for caption setting •The input image from a
camera or a VTR can be displayed on an associated
monitor through the UP-2850P/2800P in the power off mode
•Complies with the MDD
Supplied accessories: Colour printing pack (for 10 prints)
Paper tray (1)
Paper cover (1)
AC power cable
Operation manual
Optional accessories: Wired/wireless remote control Unit RM-5500
Remote control unit RM-91
Foot switch FS-36
Colour printing pack UPC-2010 (for 200 prints)
Black and white printing pack UPC-2020
(for 200 prints)
Colour postcard printing pack UPC-2070E
(for 150 prints)
Self-adhesive colour printing pack
UPC-20S01 (for 200 prints)
16-split self-adhesive pre-cut colour printing pack
STILL IMAGE

UPC-20S16 (for 200 prints)

PRODUCTS

4-split Self-adhesive pre-cut colour printing Pack

UPC-20S04 (for 200 prints)
Paper ejector UPA-2001
Paper tray (for UPC-2040A and UPC-2070E)
UPA-2002

Specifications
Dimensions: 370(W) × 125(H) × 417(D) mm
Printing method: Dye transfer sublimation thermal printing (145/8 × 5 × 161/2 inches)
Thermal head: 1024 elements (12.2 dots/mm) Mass: 10.5 kg (23 lb 2 oz)
Gradation: 256 gradations for yellow, Magenta, Safety regulations: EN60950, EN60601-1 (TÜV), MDD
Cyan Over 16.7 million colours per dot
Printing paper size: 130 × 88 mm (51/8 × 31/2 inches)
Printed picture size: Max. 110 × 80 mm (43/8 × 31/4 inches)
(Self-laminating paper: Max. 135 × 70 mm
(53/8 × 27/8 inches))
Picture elements: 860 × 976 dots
Picture memory: UP-2850P: Four frame memories
UP-2800P: One frame memory
Printing time: Approx. 35 seconds
Inputs: Y/C separate (4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Analogue RGB (BNC × 4)
RGB: 0.7Vp-p, 75Ω, unbalanced
Sync: 0.2 to 4.0Vp-p, negative, 75Ω, unbalanced
Outputs: Y/C separate (4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Analogue RGB (BNC × 4)
RGB: 0.7Vp-p, 75Ω, unbalanced
Sync: 1.0Vp-p, negative, 75Ω unbalanced
Control terminals: RS-232C (D-sub 25-pin)
Remote 1 (Special mini)
for optional remote control unit RM-5500
Remote 2 (Stereo mini)
for optional remote control unit RM-91 or foot
switch FS-36
Power requirements: 220 to 240V, 50/60Hz
Power consumption: Max. 1.0A

–204–
2-2 Colour video printers

UP-2330P/2300P
Colour video printer
•High quality print with digital process in the frame memory
in 8-bit/256 gradations and over 16 million colours per pixel
•High resolution of 310dpi, 860(H) × 976(V) dots•Near A6
size print (130 × 88mm/51/8 × 31/2 inches) in approx. 35
seconds •Multiple print modes: split image, duplicate image
and Instant Pass Photo (IPP) Mode •Easy-to-use operation
with function menu display on an associated monitor
•Remote control function by an optional foot switch FS-36,
remote control unit RM-91 or an external computer via an
RS-232C interface •Y/C and composite video input available
•200 Sheets paper feed capacity •Up to 48 characters for
caption setting •The input image from a camera or a VTR
can be displayed on an associated monitor through the
UP-2330P/2300P in the power off mode •Complies with the
MDD (UP-2300P only)
Supplied accessories: Colour printing pack (for 10 prints)
Paper tray (1)
Paper cover (1)
AC power cable
Operation manual
Optional accessories: Wired/wireless remote control Unit RM-5500
Remote control unit RM-91
Foot switch FS-36
Colour printing pack UPC-2010 (for 200 prints)
(UP-2300P only)
Black and white printing pack UPC-2020
(for 200 prints) (UP-2300P only)
Self-laminating colour printing pack UPC-2040A
(for 120 prints) (UP-2330P only)
Colour postcard printing pack UPC-2070E
(for 150 prints)
Self-adhesive colour printing pack UPC-20S01
(for 200 prints)
16-split self-adhesive pre-cut colour printing pack

STILL IMAGE
PRODUCTS
UPC-20S16 (for 200 prints)
4-split Self-adhesive pre-cut colour printing Pack
UPC-20S04 (for 200 prints)
Paper ejector UPA-2001
Paper tray (for UPC-2040A and UPC-2070E)
UPA-2002

Specifications
Printing method: Dye transfer sublimation thermal printing
Thermal head: 1024 elements (12.2 dots/mm)
Gradation: 256 gradations for yellow, Magenta,
Cyan Over 16.7 million colours per dot
Printing paper size: 130 × 88 mm (51/8 × 31/2 inches)
Printed picture size: Max. 110 × 80 mm (43/8 × 31/4 inches)
(Self-laminating paper: Max. 135 × 70 mm
(53/8 × 27/8 inches))
Picture elements: 860 × 976 dots
Picture memory: One frame memory
Printing time: Approx. 35 seconds (70 seconds when using
UPC-2040A)
Inputs: Y/C separate (4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Outputs: Y/C separate (4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Control terminals: RS-232C (D-sub 25-pin)
Remote 1 (Special mini)
for optional remote control unit RM-5500
Remote 2 (Stereo mini)
for optional remote control unit RM-91 or foot
switch FS-36
Power requirements: 220 to 240V, 50/60Hz
Power consumption: Max. 1.0A
Dimensions: 370(W) × 125(H) × 417(D) mm
(145/8 × 5 × 161/2 inches)
Mass: 10 kg (22 lb 1 oz)
Safety regulations: EN60950, EN60601-1 (TÜV), MDD (UP-2300P only)

–205–
 2-2 Colour video printers

UP-2100P
Colour video printer
•High quality print with digital process in the frame memory
in 8-bit/256 gradations and over 16 million colours per pixel
•High resolution of 182dpi, 720(H) × 564(V) dots •Near A6
size print (130 × 88mm/51/8 × 31/2 inches) in approx.
35 seconds •Easy-to-use operation with function menu
display on an associated monitor •Remote control function
by an optional foot switch FS-36, remote control unit RM-91
or an external computer via an RS-232C interface •Y/C and
composite video input available •200 Sheets paper feed
capacity •Up to 48 characters for caption setting •The input
image from a camera or a VTR can be displayed on an
associated monitor through the UP-2100P in the power off
mode •Complies with the MDD
Supplied accessories: Colour printing pack (For 10 Prints)
Paper tray (1)
Print tray (1)
AC power cable
Operation manual
Optional accessories: Wired/wireless remote control unit RM-5500
Remote control unit RM-91
Foot switch FS-36
Colour printing pack UPC-2010 (for 200 prints)

Specifications
Printing method: Dye transfer sublimation thermal printing
Thermal head: 608 elements (7.2 dots/mm)
Gradation: 256 gradations for yellow, Magenta, Cyan
Over 16.7 million colours per dot
Printing paper size: 130 × 88 mm (51/8 × 31/2 inches)
Printed picture size: Max. 110 × 80 mm (43/8 × 31/4 inches)
Picture elements: 720 × 564dots
Picture memory: One frame memory
Printing time: Approx. 60 seconds
STILL IMAGE
PRODUCTS

Inputs: Y/C separate (4-pin S terminal)

Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Outputs: Y/C separate (4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC), CCIR/PAL 1.0Vp-p
sync negative, 75Ω, unbalanced
Control terminals: Remote 1 (Special mini)
for optional remote control unit RM-5500
Remote 2 (Stereo mini)
for optional remote control unit RM-91 or foot
switch FS-36
Power requirements: 220 to 240V, 50/60Hz
Power consumption: Max. 1.0A
Dimensions: 370(W) × 125(H) × 417(D) mm
(145/8 × 5 × 161/2 inches)
Mass: 9 kg (19 lb 13 oz)
Safety regulations: EN60950, EN60601-1 (TÜV), MDD

–206–
2-3 Monochrome video graphic printers

UP-980CE (CCIR/EIA)
Monochrome video graphic printer
•Thermal video graphic printer with 256 steps of grey level
•Large print size (CCIR standard: 186x 249 mm at side
direction print mode, 187x 138 mm at normal direction print
mode) •High speed printing of 12 seconds•Multiple print
modes; Standard, Side and 2, 4, 6 split (different images)
print •Accepts both 15.75 kHz and 31.5 kHz composite video
signals •Blue transparency prints with optional UPT-210BL
•Auto paper cut function •Complies with the MDD
Supplied accessories: Paper Roll (UPP-210HD) (1)
Head Cleaning Sheet (1)
AC Power Cable (1)
BNC Cable (1)
Operation Manual (1)
Optional accessories: RM-91 Remote Control Unit
UPP-210HD High Density Printing Paper
UPP-210SE High Quality Printing Paper
UPT-210BL Blue Transparent Film

Specifications
Printing method: Direct thermal printing
Thermal head: 1280 elements
Gradation: 256 grey levels
Printing paper size: Paper width of 210 mm
Printed picture size: CCIR EIA
Standard mode: 187 × 138 mm 187 × 140 mm (W/H)
(7 ⁄8 × 5 ⁄2 inches)
3 1 (7 3⁄8 × 5 5⁄8 inches)
Side mode: 186 × 249 mm 188 × 249 mm (W/H)
(7 3⁄8 × 9 7⁄8 inches) (7 1⁄2 × 9 7⁄8 inches)
Picture memory: 2048 × 2048 × 8-bit
Printing time: CCIR: Approx. 12 seconds
EIA: Approx. 10 seconds
Inputs: CCIR or EIA composite video (BNC), 1.0 Vp-p
75 Ω /high impedance
Outputs: CCIR or EIA composite video (BNC), 1.0 Vp-p
75 Ω /high impedance
Control terminals: Remote (Stereo mini)

STILL IMAGE
PRODUCTS
for optional RM-91 Remote Control Unit
Power requirements: 220 to 240 V, 120 V, 50/60 Hz
Power consumption: 220 to 240 V: 1.3 A
120 V: 2.4 A
Dimensions: 316 (W) × 132 (H) × 305 (D) mm
(12 1⁄2 × 5 1⁄4 × 12 1⁄8 inches)
Mass: 8 kg (17 lb 10 oz)
Safety regulations: EN60950, EN60601-1, CE (MDD, EMC. LVD)

–207–
 2-3 Monochrome video graphic printers

UP-960CE (CCIR/EIA)
Monochrome video graphic printer
•Thermal video graphic printer with 256 steps of grey level
•Large print size (CCIR standard: 181 × 243 mm at side
direction print mode, 190x 142 mm at normal direction print
mode) •High speed printing of 12 seconds•Multiple print
modes; Standard, Side and 2 split (different images) print
•Accepts worldwide video signals for both CCIR and EIA
•Complies with the MDD
Supplied accessories: Paper Roll (UPP-210HD) (1)
Head Cleaning Sheet (1)
AC Power Cable (1)
BNC Cable (1)
Operation Manual (1)
Optional accessories: RM-91 Remote Control Unit
UPP-210HD High Density Printing Paper
UPP-210SE High Quality Printing Paper

Specifications
Printing method: Direct thermal printing
Thermal head: 1280 elements
Gradation: 256 grey levels
Printing paper size: Paper width of 210 mm
Printed picture size: CCIR EIA
Standard mode: 190 × 142 mm 190 × 144 mm (W/H)
(7 1⁄2 × 5 5⁄8 inches) (7 1⁄2 × 5 3⁄4 inches)
Side mode: 181 × 243 mm 184 × 243 mm (W/H)
(7 1⁄4 × 9 5⁄8 inches) (7 1⁄4 × 9 5⁄8 inches)
Picture memory: 2048 × 1024 × 8-bit
Printing time: CCIR: Approx. 12 seconds
EIA: Approx. 10 seconds
Inputs: CCIR or EIA composite video (BNC), 1.0 Vp-p
75 Ω /high impedance
Outputs: CCIR or EIA composite video (BNC), 1.0 Vp-p
75 Ω /high impedance
Control terminals: Remote (Stereo mini)
for optional RM-91 Remote Control Unit
Power requirements: 220 to 240 V, 120 V, 50/60 Hz
STILL IMAGE
PRODUCTS

Power consumption: 220 to 240 V: 1.3 A

120 V: 2.4 A
Dimensions: 316 (W) × 132 (H) × 305 (D) mm
(12 1⁄2 × 5 1⁄4 × 12 1⁄8 inches)
Mass: 8 kg (17 lb 10 oz)
Safety regulations: EN60950, EN60601-1, CE (MDD, EMC. LVD)

–208–
2-3 Monochrome video graphic printers

UP-895CE (CCIR/EIA)
Monochrome video graphic printer
•High-resolution 1280 dots x 608 lines printing (in WIDE 2
scan mode) and 256 steps of grey level •12.8 dpm or 325
dpi print resolution •High quality, glossy, near photographic
printing with newly developed printing paper, UPP-110HG
•The smoothing feature provides smoother, clearer image
output •Automatic selection of CCIR/EIA video signal
•Worldwide power supply for AC 100 to 120 / 220 to 240 V
•Automatic paper load system for simple operation •Multiple
copies (up to a maximum of ten) •Audible alarm when printer
needs paper or the video signal is absent •Compact and
lightweight •Fast printing of approximately 3.9 seconds per
screen (with smoothing feature turned off and printer set to
STANDARD print mode) •Thermal head protection •Wide
scanning function (NORMAL/WIDE 1/WIDE 2) •2x zoom for
either half of picture in either STANDARD or SIDE mode
•Selectable 4:3/1:1 aspect ratio •Approx. 203 prints* out of
UPP-110HG(18 m)** •Complies with the MDD
*Approx. 195 prints when each image cut out
**In default setting

Supplied accessories: AC power cable

BNC cable (1.5m)
Printing paper, roll (UPP-110HG)
Head-cleaning sheet
Operation manual
Consumables: High Quality Printing Paper UPP-110S
(110 mm × 20 m)
High Density Printing Paper UPP-110HD
(110 mm × 20 m)
High Glossy Printing Paper UPP-110HG
(110 mm × 18 m)
Optional accessory: Remote Control Unit RM-91

STILL IMAGE
Specifications

PRODUCTS
Thermal Head: Thin film thermal head, 1280 dots
Gradations: 256 steps of grey level (quasi)
Printed Picture Size: STANDARD print mode, at 4:3 aspect ratio
(CCIR)
NORMAL: 90 × 68 mm (3 5⁄8 × 2 3⁄4 inches)
WIDE 1: 94 × 71 mm (3 3⁄4 × 2 7⁄8 inches)
WIDE 2: 100 × 74 mm (4 × 3 inches)
(EIA)
NORMAL: 90 × 69 mm (3 5⁄8 × 2 3⁄4 inches)
WIDE 1: 94 × 72 mm (3 3⁄4 × 2 7⁄8 inches)
WIDE 2: 100 × 74 mm (4 × 3 inches)
Effective pixels: STANDARD print mode, at 4:3 aspect ratio
(CCIR)
NORMAL: 1150 dots × 560 lines
WIDE 1: 1210 dots × 582 lines
WIDE 2: 1280 dots × 608 lines
(EIA)
NORMAL: 1150 dots × 472 lines
WIDE 1: 1210 dots × 490 lines
WIDE 2: 1280 dots × 508 lines
Printing speed: Approx. 3.9 seconds/screen
(STANDARD print mode, smoothing off)
Approx. 6.8 seconds/screen
(SIDE print mode, smoothing off)
Approx. 7.8 seconds/screen
(STANDARD print mode, smoothing on)
Picture memory: 8-bit frame memory
Input/Output: VIDEO IN: BNC, CCIR or EIA composite video
signal, 1.0 Vp-p, 75 Ω/high impedance selectable
VIDEO OUT:BNC, Loop through or E to E selectable
Remote: Stereo mini jack for an optional Remote Control Unit
RM-91
Power requirements: AC 100 to 120 / 220 to 240 V, 50/60 Hz
Power consumption: Max. 120 W
Dimensions: Approx. 154 (W) × 105 (H) × 260 (D) mm
(6 1⁄8 × 4 1⁄4 × 10 1⁄4 inches)
Mass: 3.4 kg (7 lb 8 oz)
Safety regulations: EN60601-1, EN60950
EMC regulations: EN60601-1-2, EN50081, EN50082-1, AS425.1
EC directive: LVD, MDD, EMC

–209–
 2-4 Printer accessories
Print Media at a Glance
Size Description Model Print sheets/pack UP-D70XR UP-D70A UP-D8800* UP-7300MDP
A4 Blue Transparency Film UPT-730BL 100 O
Colour Print Pack UPC-8810 100 O O O
Colour Print Pack UPC-7010 100 O
B&W Print Pack UPC-8820 100 O O O
B&W Print Pack UPC-7020*/7020A 100 O
Self-Laminating Colour Print Pack UPC-740 72 O O
OHP Transparency Print Pack UPC- 8830* 100 O
OHP Transparency Print Pack UPC- 7030 100 O
Self-Laminating Colour Print Pack UPC-8840*/8840A 70 O O
A4+ Colour Print Pack UPC-8817 100 O O O
Self-Laminating Colour Print Pack UPC-747 72 O

Description Model Print sheets/pack UP-D5500 UP-5600MDP

A5 Colour Print Pack UPC-5510 200 O O
Colour Print Pack 5UPC-5510 5 packs x 200 O O
Ink Ribbon Holder for UPC-UPC-5510/5UPC-5510 UPA-5500 O O
Colour Print Pack UPC-5510C 200 O O
OHP Transparency Print Pack UPC-5530* 100 O

Description Model Print sheets/pack UP-2850P/2800P/2300P UP-2330P UP-2100P

A6 Colour Print Pack UPC-2010 200 O O
B&W Print Pack UPC-2020 200 O
Self-Adhesive Stickers Print Pack UPC-20S01** 200 O O
4-Split Self-Adhesive Stickers Print Pack UPC-20S04** 200 O O
16-Split Self-Adhesive Stickers Print Pack UPC-20S16 200 O O
Self-Laminating Colour Print Pack UPC-2040A** 120 O
Colour Postcard Print Pack UPC-2070E 150 O O

Description Model Print sheets/pack UPX-C21/UP-D2600S/D2600 UP-D2500 UP-DP10

A6 (Digital) Colour Print Pack UPC-2010 200 O O
B&W Print Pack UPC-2020 200 O O
Self-Adhesive Stickers Print Pack UPC-20S01** 200 O O
4-Split Self-Adhesive Stickers Print Pack UPC-20S04** 200 O O
16-Split Self-Adhesive Stickers Print Pack UPC-20S16 200 O O
Self-Laminating Colour Print Pack UPC-2040A** 120 O O
Self-Laminating Colour Print Pack UPC-2045 120 O
Colour Postcard Print Pack UPC-2070E 150 O O
Self-Laminating Colour Print Pack UPC-10P23E 25 O
Self-Laminating Colour Print Pack UPC-10P34 25 O
Self-Laminating Sticker Print Pack UPC-10S01 25 O

ID Card Description Model Print sheets/pack UP-D6500/D6400/D6300 UP-D6600*

Colour Ink Ribbon (CMYL) 5UPR-6040 5 packs x 250 O O
Colour Ink Ribbon (CMYKL) 5UPR-6080 5 packs x 200 O O
Black and White Ribbon (K) UPR-6025 approx. for 1000 prints O O

Description Model Paper length/roll UP-980CE UP-960CE UP-930*/910*

A4 Blue Transpacency Film UPT-210BL 12.5 m O
Width High Density Print Paper UPP-210HD 25 m O O O
STILL IMAGE
PRODUCTS

High Quality Print Paper UPP-210SE 25 m O O O

High Density Print Paper UPP-216HD 25 m O
High Quality Print Paper UPP-216SE 25 m O

Description Model Paper length/roll UP-895CE UP-890CE*/D890 UP-860CE*/D860E*

A6 High Glossy Print Paper UPP-110HG 18 m O
Width Superior Density Print Paper UPP-110HA 18 m O
High Density Print Paper UPP-110HD 20 m O O O
High Quality Print Paper UPP-110S 20 m O O O

Print Media at a Glance (for discontinued printers)

Size Description Model Print sheets/pack UP-5000 series*
A5 Colour Print Pack UPC-5010A 100 O
Colour Print Pack UPC-5010P 100 O
Colour Print Pack 10UPC-5010S 10 packs x 100 O
Ink Ribbon Holder for 10UPC-5010S UPA-5000 O
B&W Print Pack UPC-5020A 100 O
OHP Transparency Print Pack UPC-5030 50 O

Description Model Print sheets/pack UP-1000 series* UP-3000 series*

A6 Colour Print Pack UPC-1010 100 O
Colour Print Pack 20UPC-1010 20 packs x 100 O
Colour Print Pack UPC-3010 80 O
B&W Print Pack UPC-1020 100 O
B&W Print Pack UPC-3020 80 O
4-Split Self-Adhesive Stickers Print Pack UPC-S04** 100 O
16-Split Self-Adhesive Stickers Print Pack UPC-S16** 100 O
16-Split Self-Adhesive Stickers Print Pack 20UPC-S16** 20 packs x 100 O
Self-Laminating Colour Print Pack 5UPC-1040* 5 packs x 75 O
Self-Laminating Colour Print Pack 5UPC-1040A** 5 packs x 75 O (1200IVP/1200EPM only)
Self-Laminating Colour Print Pack 5UPC-3040 5 packs x 60 O (3000EP only)
Colour Postcard Paper 20UPP-1070 20 packs x 75 O
Colour Postcard Cartridge 20UPR-1070 for 1500 prints O

Foot Switch/Remote Commander at a Glance

Type Descripion Model UP-7300MDP UP-5600MDP UP-2850P/2800P/2330P/2300P/2100P UP-980CE/960CE/895CE
Foot Multiple Function Foot Switch FS-30 O
Switch Simple Foot Switch FS-36 O

Remote Simple Remote Commander RM-91 O O O O

Commander Multiple Function Remote Commander RM-5500 O O

* Production of these products has been discontinued. This information has been included to assist customers who are still using this media.
** For details, please consult your nearest Sony office.

–210–
2-4 Printer accessories
UPA-6002
Auto Card Stacker
•Auto card stacker for UP-D6500/D6400/D6300 high volume
applications •Stores up to approx. 125*1 (UP-D6500: 250*2) cards
after production

Dimensions: 138 (W) × 175 (H) × 257 (D) mm

(5 1⁄2 × 7 × 10 1⁄8 inches)

*1 In case of the card thickness is 0.76 mm.

*2 In case of the card thickness is 0.76 mm and combining with two of UPA-6003 Auto
Card Feeder.

UPA-6003
Auto Card Feeder
•Auto card feeder for UP-D6500/D6400/D6300 high volume
applications •Holds up to approx. 125*1 (UP-D6500: 250*2) cards
ready for printing and laminating

Dimensions: 138 (W) × 175 (H) × 257 (D) mm

(5 1⁄2 × 7 × 10 1⁄8 inches)

*1 In case of the card thickness is 0.76 mm.

*2 In case of the card thickness is 0.76 mm an using two of UPA-6003 Auto Card Feeder.

STILL IMAGE
PRODUCTS
UPK-5500
Four Frame Memory Board
•Additional four frame memories for the UP-5600MDP •With this
board, the internal frame memory of the UP-5600MDP can be
expanded to eight frame memories

UPK-5502SC
Digital Interface Board
•SCSI interface kit for the UP-5600MDP •Provides A/D and D/A
conversion function •Includes SCSI interface board and printer
driver software which covers PhotoShop® plug-in modules both for
Apple® Macintosh® and Microsoft Windows™ machines

–211–
 2-4 Printer accessories
RM-5500
Wired/Wireless Remote Commander
•Wired or wireless remote controls over multiple functions of the
UP-5600MDP/2850P/2800P/2330P/2300P/2100P

Supplied accessory: Remote cable (5m)

Operation manual

Specifications
Power requirement: DC 3V
Dimensions: 62(W) × 20(H) × 175(L)mm
(21/2 × 27/32 × 7 inches)
Mass: 100g (0.2 lb)

RM-91
Remote Control Unit
•To record or print an image on a still video recorder or a video
printer

Connector: Stereo mini

Cable length: 5m
STILL IMAGE
PRODUCTS

FS-30
Foot Switch
•Multiple function controls over the UP-5600MDP connected through
the D-Sub 9-pin remote interface.

Supplied accessory: Operation manual

Specifications
Terminal: D-sub 5-pin
Dimensions: 337.3(W) × 46.1(H) × 128.0(D)mm
(133/8 × 17/8 × 51/8 inches)
Mass: 1.0kg (2 lb 3 oz)

FS-36
Foot Switch
• Foot switch for UP-2850P/2800P/2330P/2300P/2100P

Specifications
Terminal: Stereo mini
Cable length: 5m
Dimensions: 175(W) × 53(H) × 105(D) mm
(7 × 21/8 × 41/4 inches)

–212–
2-4 Printer accessories
UPT-730BL
Blue Thermal Transparent Film
•A4-size blue thermal transparent film for UP-D70XR

Contents: 100 sheets of print film

Paper size: 297 × 210 mm (11 3⁄4 × 8 3⁄8 inches)

UPC-8810
A4-size Colour Printing Pack
•Colour print pack for the UP-D70A/D70XR

Contents: 100 sheets of print paper

A roll of YMC Ink Ribbon
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

STILL IMAGE
PRODUCTS
UPC-8817
A4 Plus size Colour Printing Pack
•Colour print pack for UP-D70A/D70XR

Contents: 100 sheets of print paper

1 roll of ink ribbon
Paper size: 222 × 322.4 mm (8 3⁄4 × 12 3⁄4 inches)

UPC-8820
A4-size B&W Printing Pack
•Monochrome print pack for the UP-D70A/D70XR

Contents: 100 sheets of print paper

A roll of B&W Ink Ribbon
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

–213–
 2-4 Printer accessories
UPC-740 (8840A)
A4-size Self-Laminating Colour Printing Pack
•Self-Laminating print pack for the UP-D70A/D70XR (UPC-740)
•Self-Laminating print pack for the UP-D70A (UPC-8840A)

Contents: 72 (70) sheets of print paper

A roll of YMCL Ink Ribbon
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

UPC-747
A4 Plus size Self-Laminating Colour Printing Pack
•Self-Laminating print pack for the UP-D70A

Contents: 72 sheets of print paper

A roll of YMCL Ink Ribbon
Paper size: 222 × 322.4 mm (8 3⁄4 × 12 3⁄4 inches)
STILL IMAGE
PRODUCTS

UPC-7010
A4-size Colour Printing Pack
•Colour print pack for UP-7300MDP

Contents: 100 sheets of print paper

1 roll of ink ribbon for 100 print
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

UPC-7020
A4-size Black and White Printing Pack
•Monochrome print pack for UP-7300MDP

Contents: 100 sheets of print paper

1 roll of ink ribbon for 100 print
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

–214–
2-4 Printer accessories
UPC-7030
A4-size OHP Printing Pack
•Colour OHP transparency print pack for UP-7300MDP

Contents: 100 transparencies

1 roll of ink ribbon for 100 print
Paper size: 210 × 297 mm (8 3⁄8 × 11 3⁄4 inches)

UPC-5510*
A5-size Colour Printing Pack
•Colour print pack for the UP-D5500/5600MDP

Contents: 200 sheets of print paper

1 roll of ink ribbon
Paper size: 148 × 210 mm (5 7⁄8 × 8 3⁄8 inches)
*Ink ribbon holder is not included.

5UPC-5510*
A5-size Colour Printing Pack
•Colour print pack for UP-D5500/5600MDP

Contents: 5 packs of 200 sheets of print paper

5 rolls of ink ribbon
Paper size: 148 × 210 mm (5 7⁄8 × 8 3⁄8 inches)

*Ink ribbon holder is not included.

STILL IMAGE
PRODUCTS
UPC-5510C
A5-size Colour Printing Pack
•Colour print pack for UP-D5500/5600MDP

Contents: 200 sheets of print paper

1 ink ribbon with disposable cartridge
Paper size: 148 × 210 mm (5 7⁄8 × 8 3⁄8 inches)

UPA-5500
Ink Ribbon Holder
•Ink ribbon holder for UPC-5510 and 5UPC-5510

–215–
 2-4 Printer accessories
UPA-2001
Paper Ejector
• Paper ejector for UP-D2600S/D2600/D2500/2850P/2800P/
2330P/2300P

UPA-2002
Paper Tray
• Paper tray for UPC-2045, UPC-2040A and UPC-2070E
STILL IMAGE
PRODUCTS

UPA-2003
Roller Cleaning Kit
•Roller cleaning kit for the UP-2000 series

Contents: Cleaning liquid (1)

Cleaning sheet for normal tray (1)
Cleaning sheet for UPA-2002 (optional large size tray) (1)

UPC-10P23E
Self-laminating Colour Printing Pack for UP-DP10
(for image file with aspect ratio of 2:3)

Contents: 25 sheets of print paper

1 roll of ink ribbon

Paper size: 180 × 100 mm

–216–
2-4 Printer accessories
UPC-10P34
Self-laminating Colour Printing Pack for UP-DP10
(for image file with aspect ratio of 3:4)

Contents: 25 sheets of print paper

1 roll of ink ribbon

Paper size: 180 × 100 mm

UPC-10S01
Self-laminating Sticker Printing Pack for UP-DP10
(for image file with aspect ratio of 3:4)

Contents: 25 sheets of print paper

1 roll of ink ribbon

Paper size: 180 × 100 mm

STILL IMAGE
PRODUCTS
UPC-2010
A6-size Colour Printing Pack
•Colour print pack for UPX-C21, UP-D2600S/D2600/D2500/
2850P/2800P/2300P/2100P

Contents: 200 sheets of print paper

1 roll of ink ribbon
Paper size: 130 × 88 mm (5 1⁄8 × 3 1⁄2 inches)

UPC-2020
A6-size Black and White Printing Pack
•Monochrome print pack for UPX-C21, UP-D2600S/D2600/
D2500/2850P/2800P/2300P

Contents: 200 sheets of print paper

1 roll of ink ribbon
Paper size: 130 × 88 mm (5 1⁄8 × 3 1⁄2 inches)

–217–
 2-4 Printer accessories
UPC-20S01
A6-size Self-Adhesive Stickers Printing Pack
•Printing pack for UPX-C21, UP-D2600S/D2600/D2500/2850P/
2800P/2330P/2300P

Contents: 200 sheets of print paper

1 cartridge of ink ribbon
Paper size: 130 × 88 mm (5 1⁄8 × 3 1⁄2 inches)

UPC-20S16
A6-size 16-Split Self-Adhesive Stickers Printing Pack
•Printing pack for UPX-C21, UP-D2600S/D2600/D2500/2850P/
2800P/2330P/2300P

Contents: 200 sheets of print paper

1 cartridge of ink ribbon
Paper size: 130 × 88 mm (5 1⁄8 × 3 1⁄2 inches)
STILL IMAGE
PRODUCTS

UPC-20S04
A6-size 4-Split Self-Adhesive Stickers Printing Pack
•Printing pack for UPX-C21, UP-D2600S/D2600/D2500/2850P/
2800P/2330P/2300P

Contents: 200 sheets of print paper

1 cartridges of ink ribbon
Paper size: 130 × 88 mm (5 1⁄8 × 3 1⁄2 inches)

UPC-2040A
A6-size Self-laminating Colour Printing Pack
• Self-laminating colour print pack for UPX-C21, UP-D2600S/
D2600/D2500/2330P

Contents: 120 sheets of print paper

1 cartridge of ink ribbon
Paper size: 148 × 100 mm (5 7⁄8 × 4 inches)

–218–
2-4 Printer accessories
UPC-2045
A6-size Self-laminating Colour Printing Pack
•Self-laminating colour printing pack for UPX-C21,
UP-D2600S/D2600

Contents: 120 sheets of print paper

1 cartridge of ink ribbon
Paper size: 148 × 100 mm (5 7⁄8 × 4 inches)

UPC-2070E
A6-size Postcard Printing Pack
•Postcard printing sheet for UPX-C21, UP-D2600S/D2600/
D2500/2850P/2800P/2300P

Contents: 150 sheets of print paper

1 cartridge of ink ribbon
Paper size: 148 × 100 mm (5 7⁄8 × 4 inches)

STILL IMAGE
PRODUCTS
UPT-210BL
Blue Transparent Film
•Type 3 blue transparent film roll for UP-980CE
(210 mm × 12.5 m)

UPP-210HD
High Density Printing Paper
•Type II high density thermal paper roll for UP-980CE/960CE
(210 mm × 25 m)

–219–
 2-4 Printer accessories
UPP-210SE
High Quality Printing Paper
•Type II normal density thermal paper roll for UP-980CE/960CE
(210 mm × 25 m)

UPP-110HA
Superior Density Printing Paper
•Type IV superior density thermal paper roll for the UP-D890
(110 mm × 18 m)
STILL IMAGE
PRODUCTS

UPP-110HD
High Density Printing Paper
•Type II high density thermal paper roll for UP-D890/895CE
(110 mm × 20 m)

UPP-110S
High Quality Printing Paper
•Type I normal density thermal paper roll for UP-D890/895CE
(110 mm × 20 m)

–220–
2-4 Printer accessories
UPP-110HG
High Glossy Printing Paper

•Type V high glossy thermal paper roll for the UP-895CE

(110 mm × 18 m)

5UPR-6080
Colour Ink Ribbon
•Colour ink ribbon for UP-D6500/D6400/D6300
•Provides YMCK colour print and thermal lamination

STILL IMAGE
PRODUCTS
5UPR-6040
Colour Ink Ribbon
•Colour ink ribbon for the UP-D6500/D6400/D6300
•Provides YMC colour print and thermal lamination

UPR-6025
Black and White Ribbon
•Black and White ribbon for UP-D6500/D6400/D6300

–221–
 2-4 Printer accessories
UPZ-2000M
Interface cable
•Interface cable between UP-D2500 and Apple Macintosh series
computers

Connectors: Mini DIN 8-pin df Amphenol 36-pin

Cable length: 1.5 m

UPZ-7001
Video Interface Cable
•Interface cable between UP-7300MDP and video equipment which
outputs colour high scan signals

Connectors: DN50-20-pin ↔ BNC (×5)

Cable length: 2m
STILL IMAGE
PRODUCTS

UPZ-7002
Video Interface Cable
•Interface cable between UP-7300MDP and video equipment which
outputs monochrome high scan signals

Connectors: DN50-20-pin ↔ BNC

Cable length: 5 cm

UPZ-7003
Hi-line terminator
•For 75Ω termination •Used when UP-7300MDP is used without
monitoring display

–222–
2-4 Printer accessories
UPZ-7000M
Video interface cable
•Interface cable between UP-7300MDP and Apple Macintosh series
computers

Connectors: DN50-20-pin ↔ D-sub 15-pin

Cable length: 1.5 m, 0.3 m

UPZ-7000I
Video interface cable
•Interface cable between UP-7300MDP and IBM PS/2 computers

Connectors: DN50-20-pin ↔ D-sub 15-pin

Cable length: 1.5 m, 0.3 m

STILL IMAGE
PRODUCTS

–223–
 3-1 Film scanner

UY-S90
Film Scanner
•Scans a frame in ten seconds, at a maximum resolution of
2,216 dpi (2,048 x 3,072 pixels). •High-speed consecutive
scanning of a 36-frame, 135 type (35 mm) film at 1,108 dpi
(1,024 x 1,536 pixels) which is saved on the host PC hard
disk drive in just four minutes. •High-quality performance
with Automatic Color Compensation. •Internal JPEG
compression*1 •DX code decoding*1 •Automatic film loading.
•Compatible with negatives and positives, B/W and color of
the following formats: 135 type (35 mm) film (roll / mounted
slide / film strip) AdvancedPhotoSystem (IX240) film (with
optional IX240 film carrier) •Easy setup and simple operation
Supplied accessories: Halogen lamp (2)
Sleeve carrier
Slide carrier
AC power cable
Operational manual
TWAIN driver and utility software*2 for Windows
95/98, Windows NT 4.0 and
Mac OS 8.0 or later for PowerPC
Optional accessories: Film Tray UYA-S77TR
IX240 Film Carrier PW1-NSS
Sleeve Film Carrier UYA-S77FC
Auto Slide Feeder UYA-S90SF
Halogen Lamp MPS-L60
Specifications
Supported film: 135 type (35 mm) film (roll/mounted slide/film strip)
AdvancedPhotoSystem (IX240) film
(with optional IX240 film carrier)
Accepts negatives, positives, B/W, and color
Scanning method: One-path scanning with 3-line RGB color CCD
Light source: Halogen lamp Safety regulations: UL1950, UL122, CSA C22.2 No.950, EN6950
Scanning size: 135 type film: 23.5 × 35.3 mm (15⁄16 × 1 7⁄16 inches) EMC regulations: FCC Class A, IC Class A, CE EN50081 class
IX240 type film: 15.6 x 27.9 mm (5⁄8 x 1 1⁄8 inches) B+EN50082-1, AU
Maximum resolution: Approx. 2,212 dpi (135 type), 3,326 dpi (IX240) AS4251.1
Scanning pixels: Power requirements: 100 to 120/220 to 240 V, 50/60 Hz
STILL IMAGE
PRODUCTS

Power consumption: 240 V: 0.6 A max

Thumbnail LD SD HD UD Dimensions: 438 (W) × 148 (H) × 560 (D) mm
135 type Normal 192 × 128 384 × 256 768 × 512 1,536 × 1,024 3,072 × 2,048 (17 1⁄4 × 5 7⁄8 × 22 1⁄8 inches)
(35mm) Panorama 192 × 68 384 × 136 768 × 272 1,536 × 544 3,072 × 1,088 Mass: Approx. 12 kg (26 lb 7 oz)
Slide 176 × 116 352 × 232 704 × 464 1,408 × 928 2,816 × 1,856
Slide Panorama 176 × 68 352 × 136 704 × 272 1,408 × 544 2,816 × 1,088
IX240 Normal 192 × 108 456 × 256 912 × 512 1,824 × 1,024 3,648 × 2,048
(APS) Panorama 192 × 68 456 × 160 912 × 320 1,824 × 640 3,648 × 1,280
Classic 160 × 108 384 × 256 768 × 512 1,536 × 1,024 3,072 × 2,048
APS Slide 144 × 80 288 × 160 576 × 320 1,152 × 640 2,304 × 1,280

Scanning Time*3:
Film type 135 (36 Ex. Film roll) IX240 (40 Ex. Film roll)
Pre-scanning time Approx. 40 s
Scanning time LD, SD Approx. 2.5 s / frame Approx. 3 s / frame
HD Approx. 2.5 s / frame Approx. 6 s / frame
UD Approx. 10 s / frame Approx. 23 s / frame

Color depth: Internal processing: 12 bits per color

Output: 8 bits per color
Interface: SCSI-2 (Half-pitch, pin-type connector)
System requirements:
For Windows: Platform PC/AT compatible
OS Windows 95 / 98, Windows NT 4.0
SCSI host adapter Adaptec AHA-2940 or 2930 series
Display SVGA (800 x 600 or higher)
CPU Pentium processor recommended
RAM 64 MB recommended
For Macintosh*4: CPU Power PC
OS Mac OS 8.0 or later
Display SVGA (800 × 600 or higher)

*1 Effective when used with the bundled scanning utility software.

*2 Utility software is not available in some areas.
*3 Does not include data transfer time.
*4 To use Macintosh G3 and G4, one of the following host adapter must be installed: Adaptec PowerDomain-2940 series or SCSIConnect 2906.

–224–
3-2 Film scanner accessories
UYA-S77FC
Sleeve Film Carrier
•Sleeve film carrier for 135 type (35 mm) film

Mass: 630 g (1 lb 6 oz)

UYA-S77TR
(attached with UY-S90)
Film Tray
•Film tray for roll type film

Mass: 600 g (1 lb 5 oz)

Dimensions: 215 × 134 × 259 mm
(8 1⁄2 × 5 3⁄8 × 10 1⁄4 inches)

STILL IMAGE
PRODUCTS

–225–
 4 Digital print server

UPA-D3
Digital print server
•Incorporates DICOM 3.0 compliant software to provide
multi-modality connectivity between DICOM*1 compliant
medical imaging equipment and selected Sony printers
•Capability to daisy-chain up to six selected Sony printers
•Utilizes industry standard TCP/IP protocols •Includes a
sophisticated colour matching system for use with digital
images from medical modalities such as Ultrasound, X-Ray,
Nuclear, MRI and CT

Specifications
•DICOM ver. 3.0 •CPU: R4700
•32MByte RAM •1GByte HDD

Sony’s DICOMpatible printers produce images through

a completely dry process.

The UP-D70A Digital Colour Printer is capable of producing

extremely high quality color or black and white images in
both full-bleed A4 and regular A4 sizes. The printer features
a fast print speed and a resolution of 300 dpi.

The UP-D5500/5600MDP*2 Digital Colour Printer is

remarkable for its ability to produce extremely high
resolution prints at 300 dpi, and its very fast print time. UP-D70A
High quality A5 size prints can be made.
STILL IMAGE
PRODUCTS

UP-D5500 UP-D5600MDP

*1 DICOM (The Digital Imaging and Communication in Medicine) is standardized by ACR (The American College of Radiology) and NEMA
(The National Electrical Manufactures Association).
*2 The optional UPK-5502SC Digital Interface Board and UPK-5500 Four-frame Memory Board need to be inserted in the UP-5600MDP.

–226–
5-1 Digital still camera

DKC-ST5
Digital Photo Camera
•Digital Photo Camera with the superior image quality
•For professional use in fields such as portraiture,
commercial photography and microscopy •2/3-inch 1.4
million pixel CCDs •2560 × 2048 resolution (output)
•Clear picture without blur by three Progressive Scan CCDs
•Live monitoring and instant proofing of images are possible
•Overlay function provides the ability to preview the
composition of an imge shot by DKC-ST5 and an image
from a computer •Continuous shooting up to nine images
•Quick transfer of images via SCSI port to computer
•Easy operation
Supplied Accessories: Remote controller
AC power cord
Software (for Windows ‘95 and Macintosh)
Ferrite core

Specifications
Image device: 2/3-inch progressive scan CCD
Total pixel number: Approx. 1,400,000 pixels
Color separation: 3-CCD prism system with diagonal spatial offset
Lens mount: 2/3-inch bayonet
Output data size: 2,560 × 2,048
Sensitivity: ISO 20, 40, 80, 160 equivalent (selectable)
Shutter speed: 1/10,000 to 4 sec.
1/1,000 to 1/15 sec. (with flash sync.)
Continuous shooting: 2 frames/sec. (up to 9 frames)
Buffer memories: 9 frames
Digital interface: SCSI-2, RS-232C
Monitor out: Video, S-Video, R/G/B
Dimensions Camera head: 120(W) × 90(H) × 202.2(D) mm
(43/4 × 35/8 × 8 inches)
Processor unit: 211(W) × 365(H) × 128.5(D) mm
(8 3/8 × 143/8 × 51/8 inches)
Mass: Camera head: 1.3 kg (2 lb 14 oz)

STILL IMAGE
PRODUCTS
Processor unit: 6 kg (13 lb 4 oz)

–227–
 5-1 Digital still camera

DKC-5000
Digital Photo Camera
•High resolution of 800 (h) x 800 (v) TV lines •1/2-inch
three-CCD camera (470K pixels each) •Diagonal pixel offset
•10-bit analog-to-digital conversion and Look Up Table
(LUT) realizing delicate adjustments of color saturation and
gamma characteristics •Strobe synchronization •Equipped
with two-frame memory •Controllable from a computer via
SCSI •1/2-inch 38mm bayonet mount
Supplied Units/Accessories:
Camera head
Digital processor
Camera cable (10m)
Release switch (RM-S72)
Software (Photoshop Plug-in)
SCSI cable
AC power cord
Optional Accessories: DKB-5008 (Frame Memory board)
VCL-713BXS
DXF-40BCE
DXF-41

Specifications
Camera Head
Imager: 3-chip 1/2-inch Interline-transfer CCD
Effective picture elements:
440,000 pixels
Total picture elements: 470,000 pixels
Resolution: 800 (horizontal) x 800 (vertical) TV lines
Spatial pixel offset: Horizontal and vertical
Lens mount: 1/2-inch 38mm bayonet
Signal-to-noise ratio: More than 56dB (at ISO 100)
Sensitivity: ISO 100, 200, 400, 800
White balancing : Automatic (Flash ON/OFF)
Manual (Red gain and Blue gain adjustable
individually)
Electric shutter: 4 to 1/10,000 sec.
Gamma: Switchable (on/off/User1/User2/User3)
STILL IMAGE
PRODUCTS

Contrast: Adjustable from -127 to 127

Colour temperature pre-setting:
3200K/5600K
Input/output connector: Processor: 20-pin
Lens: 6-pin
EVF: DIN 8-pin
REMOTE: 4-pin, for RM-S72
FLASH: X-connector
PC IN: Stereo mini
TRIG: Stereo mini
Operating temperature: 5˚C to 35˚C
Dimension: 70(W) × 72(H) × 123.5(D) mm
Mass: (Approx.) 620 g

Digital Processor
Analog/Digital conversion: 10-bit
Final image data size: 1520 (h) × 1144 (v) × 3 channels (5.0Mbytes)
Memory: 2 planes
Analog output: R/G/BSync.: BNC × 4, 0.7 Vp-p, 75 ohms
(625 lines/ 50Hz)
Digital interface: SCSI-2
Input/output connector: Camera: 20-pin
FLASH: X-connector
REMOTE1: 12-pin
REMOTE2: Mini
REMOTE3: D-sub 9-pin
SCSI: Amphenol 50-pin x 2
Power requirements: AC 220V to 240 V (50/60Hz)
Power consumption: 0.7A
Dimension: 423(W) × 105.5(H) × 356.5(D) mm
Mass: Approx. 9 kg

–228–
5-1 Digital still camera

DKC-CM30
Digital Still Camera
•Accepts C-mount capability •Alternative operating methods-
shutter release on the handheld camera with the supplied
remote release, optional DKA-GP30 Camera Grip or RM-91
Remote Control Unit •640 × 480 pixels resolution
•Progressive Scan CCD for clear pictures without movement
blur •JPEG compression •4 MB flash memory holds 30
images captured in high resolution of 640 × 480 or 120
images captured in standard resolution of 320 × 240 pixels
•Strobe synchronization capability •Immediate viewing of
captured images with the LCD monitor •Computer control
and image data transfer via RS-232C port
Supplied accessories: Remote shutter release
RS-232C cable
Video Cable
RCA/BNC conversion connector
MGI PhotoSuite SE on CD-ROM
Operating instructions for camera and software
Optional accessories: Camera grip DKA-GP30
AC power adapter/charger DKA-AC30
Rechargeable lithium-ion battery NP-F550

Specifications
Image device: 1/3-inch progressive scan CCD
(Effective pixel number: 320,000 pixels)
Image data size: 640 × 480 pixels
Compression method: JPEG
Storage: 4 MB internal flash memory
Number of images: High resolution: 30 images (640 × 480 pixels)
Standard resolution: 120 images (320 × 240 pixels)
White balance: Auto/3,200K/5,400K* (selectable)
Lens mount: C-mount
Exposure control: CCD iris (when flash is not used)
Flash: External flash, hot shoe and X terminal equipped
Photometric system: TTL, CCD, centre-weighted averaging metering
system

STILL IMAGE
PRODUCTS
Shutter speeds: 1/4 to 1/4,000 seconds
Sensitivity: Equivalent to ISO 90
LCD monitor: 2-inch TFT colour LCD monitor with 110,000 pixels
Self-timer: 10 seconds
Digital I/F: RS-232C
Video output: NTSC
Other I/O: Remote shutter release connector, DC IN connector
Power supply voltage: 8.4 V (at AC power adapter connector)
7.2 V (at battery terminals)
Power consumption: 3.7 W (when LCD monitor is on)
Dimensions: 81 (W) × 61 (H) × 58 (D) mm
(3 1⁄4 × 2 1⁄4 × 2 3⁄8 inches)
Mass: 430 g (15 oz)

–229–
 5-1 Digital still camera

DKC-FP3
Digital Still Camera
•Professional digital still camera ergonomically designed
similar to 35 mm cameras •Equipped with high speed digital
interface, IEEE1394 •High performance Wfine CCD™ to
achieve high resolution of 1,344 x 1,024 pixels •5x Optical
zoom lens with fast aperture •Optical viewfinder and 2.5-inch
color LCD •Auto/manual operations for control settings •Fast
and Continuous Operation with 3 MB buffer memory •Up to
2.5 hours of operation (1,700 consecutive shots*) with
InfoLITHIUM™ Rechargeable Battery Pack
•Removable PCMCIA Card** and “Memory Stick”™ Media
•Histogram feature for checking the exposure •Guide Line
Function (Top Marker, Bottom Marker)
* Flash and LCD monitor off (CAM mode)
** Some type of PC card may not be used.

Supplied Accessories: 8 MB “Memory Stick” MSA-8A

“Memory Stick”/ PC Card Adaptor MSAC-PC2
Remote Controller RM-S7D
Remote controller cable
Video cable
IEEE1394 cable (6pin-6pin/3.5 m)
Lens cap
Finder cap
AC adapter/charger (AC-VQ800)
TWAIN driver software (CD-ROM)
Operation Manual
Optional Accessories: InfoLITHIUM Rechargeable Battery Pack NP-F550
Soft Case LCM-D700
IC Recording Media “Memory Stick” MSA-4A/8A/16A
Digital Color Printer UP-D2500

Specifications
Imager
Optical Size: 1/2-inch Recording System
Imager Type: Wfine CCD (Progressive Scan, RGB Primary Color Image Data Size: 1,344 × 1,024 pixels, 640 × 480 pixels
STILL IMAGE
PRODUCTS

Filter, Square Pixel CCD) Recording Media: PCMCIA Flash ATA TypeII
Number of Pixels: 1.5 million (Total), 1.4 million (effective) “Memory Stick” (PC card adaptor required)
Lens Recording Format: JPEG (Compressed), TIFF (No Compressed)
Zoom Ratio: 5x Number of Images
F No.: F2 to 2.4 JPEG TIFF
Focal Length: f = 5.2 to 26 mm (35 mm film equivalent: 28-140mm) Recording Media Data Size Low Middle High Super
Element: 13 elements in 10 groups 16 MB Memory Stick 1,344 × 1,024 82 41 20 3
Filter Size ø62 mm 16 MB Memory Stick 640 × 480 246 123 61 17
Minimum Object Distance: 20 cm in all Focal length, Auto Macro 8 MB Memory Stick 1,344 × 1,024 40 20 10 1
Aperture: F2 to 11 (Wide), F2.4 to 11 (Tele) / 21 steps 8 MB Memory Stick 640 × 480 122 61 30 8
Camera Functions
Shutter Speed: 4 to 1/2,000 s (1/4 to 1/2,000 s in AE mode, ISO 50) Camera Mode: Continuous shooting, 2x digital zoom,
(1/8 to 1/2,000 s in AE mode, ISO 100) interval recording, Self-timer
(1/30 to 1/2,000 s in AE mode, ISO 400) Playback Mode: INDEX display, Enlarged, Rotate, Autoplay,
Shutter: Electrical shutter and mechanical shutter Quick-review, Protect, Segmentation (Folder)
Focus Control: CCD TTL Auto/Manual Other input/output: Video output, Accessory shoe
Exposure Control: Programmed AE/Aperture priority AE/ General
Shutter speed priority AE/Manual, AE Lock function Power Requirement: DC 7.2 V
EV Compensation: -2EV - +2EV (1/4 EV steps) Power Consumption: 0.9 A, DC 7.2 V (CAM mode with LCD monitor ON)
Metering System: Center-weighted averaging/Spot 0.6 A, DC 7.2 V (PLAY mode with LCD monitor ON)
Sensitivity: ISO 50/100/400 equivalent Power Supply: InfoLITHIUM Rechargeable Battery Pack NP-F550
White Balance: Auto/Hold/Indoor/Outdoor AC-VQ800
Digital Interface: IEEE1394 (Digital Camera Command Set) Battery Life/ Shots: 2.5 hours/1,700 shots
6-pin (Power source is not available.) (Flash off, LCD monitor off, CAM mode)
Built-in Flash Dimension (W/H/D): 133 × 104 × 153 mm (5 1⁄4 × 4 1⁄8 × 6 1⁄8 inches)
Type: Self-regulating Flash Mass: Approx. 890 g (1 lb 15 oz)
G.N.: 10 (without battery and PC Card)
Mode: Auto/Forced/Disable Driver Software: TWAIN Driver, 1394 Driver
Synchronization Speed: 4 to 1/2,000 s Computer: IBM PC/ AT Compatible
Optical Viewfinder OS: Windows 98
Type: SLR Type, Built-in Focusing Screen CPU: Intel MMX Pentium 150MHz or more
Field of View Percentage:92% Memory: 32 MB or more
LCD Display in Finder: Shutter Speed, Aperture, EV Compensation, (64 MB or more is recommended.)
AE Lock, AF, Flash, White Balance, Metering System CD-ROM Drive
LCD Monitor Recommended application software
Size: 2.5-inch Adobe PhotoShop 5.0 or higher
Type: TFT color LCD made of low-temperature polysilicon Adobe PhotoDeluxe 3.0 or higher
Resolution: 180,000 dots Recommended IEEE1394 Adaptor
Display Control: Contrast, Brightness, Color, Picture, Display Size IEEE1394 Adaptor (Board):
Refresh Rate: 25 frames/s RATOC-PCIFW1 (by RATOC System Inc.)
IEEE1394 Adaptor (PC Card):
RATOC-CBFW1 (by RATOC System Inc.)

–230–
5-2 Digital still recorder

DKR-700P
Digital Still Recorder
•Digital still image recorder for a wide range of applications
•Recording medium: MD Data medium/Picture MD •500 TV
lines digital recording •JPEG Compression •Selection is
possible from five picture modes - Non Compression/Fine/
Normal/Quick1/Quick2 •Flash Synchronization •Image
Information such as the title of the image, sent from RM-
C700 or an external computer, can be recorded along with
the images •Interval recording to be set from 5 sec. to 60
min. •Automatic playback •Multiple inputs/ outputs •List
search function with RM-C700 •Image Search funtion •Rapid
image retrieval •SCSI port equipped allowing image data to
be transferred to a computer •RS-232C port allows
sophisticated control from a computer •Foot switch operation
is possible with FS-20 and FS-30
Supplied Accessories: Operational manual
Software (Photoshop Plug-in for Windows)
AC Power Cord
Optional accessories: RM-C700 (Remote Control Unit)
RM-91 (Remote Control Unit)
FS-20 (Foot Control Unit)
FS-30 (Foot Control Unit)
MMD-140 (Rewritable MD DATA medium)

Specifications
Recording Medium: Mini Disc for DATA
File Format: Picture MD
Data Compression Method:
JPEG Base Line; Fixed Data Length algorithm
Data Size/Sub Sampling: MAIN 768 × 592 (Y:U:V 4:2:2)
SD(Quick play back) 640 x 480 (Y:U:V 4:2:0)
INDEX (Image search) 80 x 60 (Y:U:V 4:2:0)
Sampling Frequency: 14.75MHz
Digital Interface: SCSI RGB 4:4:4 pixel sequential
Digital I/O SCSI-2 Half pitch pin conncetor

STILL IMAGE
PRODUCTS
Horizontal resolution: More than 500 TV lines
Video input: Composite (BNC x 1)
Y/C (DIN 4-pin S type)
RGB (BNC × 3)
Sync (BNC × 1)
Video output: Composite (BNC × 1)
Y/C (DIN 4-pin S type)
RGB (BNC × 3)
Sync (BNC × 1)
Image information: Image Number (Auto increment)
Title 15 digits
ID Number 15 digits
year/month/date/hour/min./sec.
Comment 250 Bytes
Recording mode: NON COMPRESSION/FIN/NORMAL/QUICK1/QUICK2
Camera control mode: CAMERA1 BNC (External Sync)
(for Long Time Exposure by DXC-930P/950P)
CAMERA 2 BNC (External Sync)
(for REC Control by DXC-950P)
External control: RS-232C (D-sub 9-pin female) for computer control
Power requirement: AC220/230/240V switchable, 50Hz
Power consumption: 0.30 A max.
Mass: Approx. 7.0kg
Safety approval: EN60950, EN50081-1, EN50082-1, FCC Class A
(The DKR-700P meets all applicable provisions of
the EN60601-1 safety standard.)

*When flash id on, white balance is automatically set to 5400K.

–231–
 5-3 Digital still camera/recorder accessories
RM-C700
Remote control unit for the DKR-700P
•For convenient operation of the DKR-700P
•File name can be input to the images of the DKR-700P

FS-30
Foot Switch
•Multiple function controls over the UP-5600MDP connected through
the D-sub 9-pin remote interface.

Supplied accessory: Operation manual

Specifications
Terminal: Disub 5-pin
Dimensions: 337.3(W) × 46.1(H) × 128.0(D) mm
STILL IMAGE
PRODUCTS

MMD-140
Rewritable MD DATA
•Large capacity (140MB)
•Compact size (Diameter 64mm, Width 1.2mm)

RM-91
Remote control unit
•To record or print an image on a still video recorder or a video
printer

Connector: Stereo mini

Cable length: 5m

–232–
5-3 Digital still camera/recorder accessories
FS-20
Foot swich
•To record or print an image on a still video recorder or a video
printer

Connector: Monaural mini

Cable length: 5m

DKA-GP30
Camera Grip
•DKC-CM30 Camera Grip for stable photographing

Dimensions: 141.3 (W) × 110.4 (H) × 59.9 (D) (mm)

(5 5⁄8 × 4 3⁄8 × 2 3⁄8 inches)
Mass: 280 g (10 oz)

STILL IMAGE
PRODUCTS
DKA-AC30
AC Power Adapter/charger
•DKC-CM30 AC adaptor/battery charger for charging Lithium-ion
battery such NP-F550/F530

Dimensions: 56 (W) × 44 (H) × 100 (D) (mm)

(2 1⁄4 × 1 3⁄4 × 4 inches)
Mass: Approx. 190 g (7 oz)

DKB-5008
Frame Memory Board for the DKC-5000

–233–
 5-3 Digital still camera/recorder accessories
VCL-713BXS
Zoom Lens for DKC-5000
•x13 Zoom Lens •Standard lens for DKC-5000

Lens mount: 38 mm bayonet mount

Focal length: 7.5 to 97.5 mm
Maximum relative aperture:
F1.4
Minimum focal distance: 1.0 mm
Filter screw: 72 mm
Aperture speed : 0.4 s
Control: Focus: Manual, Zoom: Manual
Iris: Servo/Manual
Mass: 850 g (1.9 lb)

VCL-1205BYS
Zoom Lens for DKC-ST5
Lens mount: 2/3-inch bayonet
Focal length: 12.5 to 63 mm (equivalent to a focal length of 50 to
252 mm in 35 mm film format)
Aperture: F2 to F16
Mass: 1.2 kg (2 lb 10 oz)
STILL IMAGE
PRODUCTS

–234–
SECTION 7 SURVEILLANCE PRODUCTS
1. Video cameras
1-1. Colour video cameras
SSC-CX34P ...................................................236
SSC-DC50AP/DC54AP/58AP ........................237
SSC-DC330P/DC334P/DC338P ....................238
SSC-DC10P ...................................................239
SSC-DC14P/DC18P.......................................240
SSC-C108P/C104P........................................241
SSC-C370P....................................................242
1-2. Monochrome video cameras
SPT-M320CE/M324CE/M328CE ...................243
SPT-M128CE/M124CE/M122CE ...................244
SSC-M370CE.................................................245
1-3. Camera accessories
YS-W150P......................................................246
YS-W250P......................................................246
YT-B21 ...........................................................247
T-301/305/307 ................................................247
Lenses............................................................248

2. Monitors
2-1. Colour monitors
SSM-9040P ....................................................249
SSM-14N5E ...................................................250
SSM-20N5E ...................................................251
2-2. Monochrome monitors
SSM-930CE ...................................................252
SSM-125CE ...................................................253
SSM-175ACE .................................................254
SSM-Q177CE.................................................255

3. Switchers
YS-S6 .............................................................256

4. Quad switcher
YS-Q440P ......................................................257

5. Multiplexers

SURVEILLANCE
YS-DX316P/DX216CE ...................................258

PRODUCTS
YS-SX310P/SX210CE ...................................259

6. Time lapse video recorders

6-1. Time lapse video recorders
SVT-L230P.....................................................260
SVT-5050P.....................................................261
SVT-S3050P ..................................................262
SVT-1000P.....................................................263
SVT-124P.......................................................264
6-2. Time lapse video recorder accessories .........265

7. Digital Surveillance recorder

7-1. Digital surveillance recorder
HSR-1P ..........................................................266
7-2. Digital surveillance recorder accessories.......267

8. Monitoring Codecs
PMS-500P/400P.............................................268

9. Automotive camera/monitors
9-1. Automotive monochrome video camera
SSC-534AM ...................................................269
9-2. Automotive monochrome video monitors
SSM-504AM/724AMR ....................................270

–235–
 1-1. Colour video cameras

SSC-CX34P
Built-in Zoom Lens Colour Video Camera
•Especially designed for surveillance applications •Built-in
x12 switchable motorized/auto iris zoom lens with
zoom/focus preset capabilities •The lens zoom, focus and iris
function can be remotely controlled from an external
controller/receiver (Lens control voltage, ±6 V or ±12 V is
selectable) •Digitally-controlled Smart Control function
provides intelligent and flexible automatic backlight
compensation •High density 1/3-inch IT Hyper HAD CCD
offers a high resolution of 470 TV lines and high sensitivity
with a minimum illumination of 4.5 lx (F1.8) •Excellent signal-
to-noise ratio of 50 dB •Extra gain with Turbo AGC function,
providing 6 dB more gain than conventional AGC
•Aperture/Sharp Mode makes object outlines sharper in the
reproduced picture •Three alternative automatic white
balance control modes: AWB (Auto White Balance) by one
push/ATW (Auto Tracing White Balance)/ATWpro •New
ATWpro mode ensures reliable white balance control based
on the absolute colour temperature of the object (The
effective operational colour range is 2500 K to 6000 K)
Supplied Accessories: Tripod adaptor (1)
Lens control cable (1)
Operation manual (1)

Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 752 (H) × 582 (V)
Sensing area: 4.4 × 3.3 mm
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with AC line lock
Phase control: V phase adjustment (±90°)
Horizontal resolution: 470 TV lines
Lens mount: Built-in ×12 zoom lens
Minimum illumination: AGC ON (TURBO mode)
2.4 lx at F1.8 (30 IRE)*
4.5 lx at F1.8 (50 IRE)
15 lx at F1.8 (100 IRE)
*Equivalent with 1.1 lx at F1.2 fixed lens (30 IRE)
Aperture control: SHARP/NORMAL switchable
Enhancer: 3H
SURVEILLANCE

Automatic gain control (AGC):

PRODUCTS

TURBO/NORMAL/OFF switchable
Electronic shutter: Not applicable
White balance: ATWpro/ATW/AWB (one-push) switchable
Backlight compensation: Smart control (BLC ON/OFF switchable)
Signal-to-noise ratio: 50 dB (Weight ON, AGC OFF)
Video out: BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: –10°C to 50°C (14°F to 122°F)
Storage temperature: –40°C to 60°C (–40°F to 140°F)
Power requirements: AC 24 V, 50 Hz
Power consumption: 4.8 W
Mass: 520 g (1 lb 2 oz)
Connectors: AC 24 V terminals, LENS CONTROL
(Mini DIN 8-pin), VIDEO OUT (BNC), GND

Dimensions

72(27/8)
60(23/8)

129.5(51/8)
72(27/8)
9(3/8)
60(23/8)

60(23/8)

140.2(55/8)
Unit: mm (inch)

–236–
1-1. Colour video cameras

SSC-DC50AP/54AP/58AP
CCD Colour Video Camera
•Especially designed for surveillance applications •High
density 1⁄2” IT CCD •Exwave HAD™ technology offers
excellent sensitivity with a minimum illumination of 0.8 lx
SSC-DC50AP SSC-DC54AP
(F1.2), very low smear, and high resolution of 470 TV lines
•Digitally-controlled Smart Control function provides
intelligent and flexible automatic backlight compensation •For
faster backlight compensation, the detection area can be
preset •Excellent signal-to-noise ratio of 50 dB •Y/C output
capability •Extra gain with Turbo AGC function, providing
6 dB more gain than conventional AGC •Aperture/Sharp Lenses are optional SSC-DC58AP
Mode makes object outlines sharper in the reproduced
picture •Four alternative white balance control modes : AWB
(Auto White Balance) by one push/ATW (Auto Tracing White
Balance)/ATWpro/5600K •New ATWpro mode ensures
reliable white balance control based on the absolute colour
temperature of the object (The effective operational colour
range is 2500 K to 6000 K) •Variable speed electronic shutter
•Accepts 2 types of auto iris lenses (DC servo type/Video
servo type) •Accepts C/CS-mount lenses SSC-DC50AP SSC-DC54AP SSC-DC58AP

Exclusive features for SSC-DC50AP

•External synchronization with VBS or VS •Single cable Video out: BNC: 1.0 Vp-p, 75 Ω, sync negative
operation (video/sync/power triple multiplex transmission) for Y/C: Y: 1.0 Vp-p, 75 Ω, sync negative
easy installation with the optional YS-W150P/W250P C: 0.3 Vp-p, at burst level, 75 Ω
Operating temperature: -10°C to 50°C (14°F to 122°F)
Camera Adaptor (Mode A) •Monitor out function for on-the- Storage temperature: -40°C to 60°C (-40°F to 140°F)
spot camera positioning (Mode A) •12 V DC power supply Power requirements: DC50AP: 1) Multiplexing with YS-W150P/W250P
can also be used (Mode B) 2) DC 12 V from DC 12 V power supply
DC54AP: AC 24 V, 50 Hz
DC58AP: AC 220-240 V, 50 Hz
Exclusive features for SSC-DC54AP/58AP Power consumption: DC50AP: 1) 5.5 W supplied from YS-W150P/W250P
•External synchronization with VBS, VS or AC line lock 2) 4.5 W at DC 12 V
•AC power operation : AC 24 V (DC54AP), AC 220-240 V DC54AP: 6.0 W
DC58AP: 5.5 W
(DC58AP) Mass: DC50AP/DC54AP: 600 g (1 lb 5 oz)
DC58AP: 900 g (2 lb)
Supplied Accessories: Lens connector (1)
Auto iris type: DC/VIDEO servo type
Lens mount cap (1)
Connectors: DC50AP: DC 12 V terminals, LENS (4-pin), Mode A
Operation manual (1)
(Triple multiplexing operation): DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT

SURVEILLANCE
Optional accessories: Camera adaptor YS-W150P, YS-W250P

PRODUCTS
(BNC), S-VIDEO OUT (Mini DIN 4-pin)
(for SSC-DC50AP only)
Mode B (DC 12 V operation):VIDEO OUT
Aspherical auto iris lens VCL-3ADXEA (3.8 mm, F0.8)
(BNC), VBS/VS IN (BNC), S-VIDEO OUT
Auto iris lens VCL-S03XEA (3.6 mm, F1.6)
(Mini DIN 4-pin)
VCL-S06XEA (6.0 mm, F1.2)
DC54AP: AC 24 V terminals, LENS (4-pin), VBS/VS
VCL-S12XEA (12 mm, F1.2)
IN (BNC),VIDEO OUT (BNC), S-VIDEO
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
OUT (Mini DIN 4-pin), GND
VCL-S06XM (6.0 mm, F1.2)
DC58AP: LENS (4-pin), VBS/VS IN (BNC),VIDEO
OUT (BNC), S-VIDEO OUT (Mini DIN 4-
Specifications pin)
Image device: 1/2-inch Interline Transfer Exwave HAD CCD
Picture elements: 752(H) x 582(V)
Sensing area: 6.3 × 4.7 mm Dimensions
Scanning system: 625 lines, 2:1 interlace SSC-DC50AP/DC54AP/DC58AP
Sync system: DC50AP : Internal or external with VBS/VS or
64 (25⁄8)
MPX-VS
c cs
DC54AP/DC58AP : Internal or external with VBS/VS
57 (21⁄4)

or AC line lock
Phase control: H/SC phase adjustment
cs c
(H phase:±0.12H, SC phase:360° with 0/180° switch)
V phase adjustment (±90°) for AC line lock
9 (3⁄8)

(SSC-DC54AP/DC58AP only)
Horizontal resolution: 470 TV lines SSC-DC50AP/DC54AP
Lens mount: C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)
0.4 lx at F1.2 (30 IRE)
0.8 lx at F1.2 (50 IRE)
3.0 lx at F1.2 (100 IRE)
Aperture control: SHARP/NORMAL switchable 49 (115⁄16) 137 (51⁄2 )
10.2 (13⁄32)
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable SSC-DC58AP
Electronic shutter: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 (seconds)
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100000 (seconds)
White balance: ATWpro/ATW/AWB (one-push)/5600K switchable
Backlight compensation:Smart Control (BLC ON/OFF switchable, eight AE
49 (115⁄16)
spot is selectable) 162 (61⁄8)
10.2 (13⁄32)
Signal-to-noise ratio: 50 dB (Weight ON, AGC OFF)

–237–
 1-1. Colour video cameras

SSC-DC330P/DC334P/DC338P
CCD colour video camera
•Especially designed for surveillance applications •1/3” IT
HAD CCD •Exwave HAD technology offers extremely high
sensitivity with a minimum illumination of 0.8 lx (F1.2) and
SSC-DC330P
high horizontal resolution of 480 TV lines •Excellent signal-
to-noise ratio of more than 50 dB •Digital control Smart
Control function executes the intelligent and flexible
automatic backlight compensation •Turbo AGC raises
sensitivity by automatically controlling video gain in a range
that is 6 dB wider than the normal AGC range
•Aperture/Sharp Mode makes object outlines sharper in the
reproduced picture •CCD IRIS function allows use of SSC-DC334P SSC-DC338P
inexpensive manual iris lenses •Two alternative automatic
white balance control modes: ATW (Auto Tracing White
Balance)/ATW pro •Accepts 2 types of auto iris lenses (DC
servo type/Video servo type) •Accepts both CS and C-mount
lenses

Exclusive features for SSC-DC330P

•External synchronization with VBS or VS •Single cable
operation (video/sync/power triple multiplex transmission) for
easy installation with the optional YS-W150P/W250P
Camera Adaptor (Mode A) •Monitor out function for on-the-
SSC-DC330P SSC-DC334P SSC-DC338P
spot camera positioning (Mode A) •12 V DC power supply
can also be used (Mode B)

Exclusive features for SSC-DC334P/338P

•External synchronization with AC line lock •AC power
operation : AC 24 V (DC334P), AC 220-240 V (DC338AP)
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual

Specifications
Image device: 1/3-inch Interline Transfer HAD CCD Power consumption: DC330P: 5.0 W wupplied from YS-W150P/W250P
Picture elements: 752 (H) × 582 (V) 3.0 W at 12 V
Sensing area: 4.8 mm × 3.6 mm DC334P: 4.5 W
SURVEILLANCE

Video signal system: PAL standard DC338P: 5.5 W

PRODUCTS

Scanning system: 625 lines, 2:1 interlace Mass: DC330P: 430 g (15 oz)
Sync system: SSC-DC334P/338P: External with AC line lock DC334P: 550 g (1 lb 3 oz)
SSC-DC330P: Internal or external with VS/VBS* DC338P: 770 g (1 lb 11 oz)
Horizontal resolution: 480 TV lines Auto iris lens: DC servo type
Lens mount: C/CS-mount (Back focus adjustable) Connectors: DC330P: DC 12 V terminals
Minimum illumination: AGC ON (TURBO mode) LENS (4-pin)
0.4 lx at F1.2 (30 IRE) Mode A (Triple multiplexing operation):
0.8 lx at F1.2 (50 IRE) DC IN/VS IN/VIDEO OUT (BNC),
6.5 lx at F1.2 (100 IRE) MONITOR OUT (BNC)
Aperture: SHARP/NORMAL switchable Mode B (DC 12 V operation): VS
Automatic Gain Control: TURBO/NORMAL/OFF switchable IN/VIDEO OUT (BNC)
Phase control: SSC-DC330P: H phase adjustment (+/-0.25H) DC334P: VIDEO OUT (BNC), LENS (4-pin),
SSC-DC334P/DC338P: V-phase adjustment (±90°) AC 24 V terminal, GND
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100000 s DC338P: VIDEO OUT (BNC), LENS (4-pin)
White balance: ATW pro/ATW switchable
Backlight compensation: Smart Control * The burst signal is not locked
Signal-to-noise ratio: More than 50 dB (Weight ON, AGC OFF)
Video out: 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 to 50°C (14 to 122°F )
Storage temperature: -40 to 60°C (-40 to 140°F )
Power requirements: DC330P: 1) Multiplexing with YS-W150P/W250P
2) 12 V DC V from DC 12 V power supply
DC334P: AC 24 V, 50 Hz
DC338P: AC 220 to 240 V, 50 Hz

Dimensions:
SSC-DC330P/ SSC-DC330P SSC-DC334P SSC-DC338P
DC334P/DC338P
121.2 (4 7/8) 141 (5 5/8) 141 (5 5/8)
70 (2 7/8) 49 (1 15/16) 110 (4 3/8) 54.5 (2 1/4) 130 (5 1/8) 54.5 (2 1/4) 130 (5 1/8)

C CS
57 (2 1/4)

CS C

9 (3/8)

–238–
1-1. Colour video cameras

SSC-DC10P
CCD Colour Video Camera
•Especially designed for surveillance applications •Digitally-
controlled Smart Control function provides intelligent and
flexible automatic backlight compensation •High density 1/3-
inch IT Hyper HAD CCD offers a high resolution of 470 TV
lines and high sensitivity with a minimum illumination of 1.7 lx
(F1.2) •Excellent signal-to-noise ratio of 50 dB •Extra gain
with Turbo AGC function, providing 6 dB more gain than
conventional AGC •Aperture/Sharp Mode makes object
outlines sharper in the reproduced picture •Two alternative
white balance control modes : ATW(Auto Tracing White
Balance) / ATWpro •New ATWpro mode ensures reliable
white balance control based on the absolute colour Lens is optional

temperature of the object (The effective operational colour

range is 2500 K to 6000 K) •Accepts two types of auto iris
lenses (DC servo type/Video servo type) •Accepts C/CS-
mount lenses •External synchronization with VS •Single
cable operation (video/sync/power triple multiplex
transmission) for easy installation with the optional YS-
W150P/W250P Camera Adaptor (Mode A) •Monitor out
function for on-the-spot camera positioning (Mode A) •12 V
DC power supply can also be used (Mode B)
Supplied Accessories: Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Optional accessories: Auto iris lens
VCL-4V8WEA (3.5 mm to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.8)

Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 752 (H) × 582 (V)
Sensing area: 4.4 × 3.3 mm
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS/VBS* or MPX-VS
* The burst signal is not locked.
Phase control: H phase adjustment (±0.25H)
Horizontal resolution: 470 TV lines
Lens mount: C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)

SURVEILLANCE
1.1 lx at F1.2 (30 IRE)

PRODUCTS
1.7 lx at F1.2 (50 IRE)
10 lx at F1.2 (100 IRE)
Aperture control: SHARP/NORMAL switchable
Enhancer: 3H
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100000 (seconds)
White balance: ATWpro/ATW switchable
Backlight compensation: Smart Control (BLC ON/OFF switchable)
Signal-to-noise ratio: 50 dB (Weight ON, AGC OFF)
Video out: BNC: 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: –10°C to 50°C (14°F to 122°F)
Storage temperature: –40°C to 60°C (–40°F to 140°F)
Power requirements: 1) Multiplexing with YS-W150P/W250P
2) DC 12 V from DC 12 V power supply
Power consumption: 1) 4.0 W supplied from YS-W150P/W250P
2) 3.0 W at DC 12 V
Mass: 430 g (15 oz) Dimensions 1/4" UNC (20pitch)
Auto iris type: DC/VIDEO servo type
Connectors: DC 12 V terminals, LENS (4-pin), Mode A (Triple
32 (15/16)

multiplexing operation): DC IN/VS IN/VIDEO OUT

(BNC), MONITOR OUT (BNC) Mode B (DC 12 V
operation): VIDEO OUT (BNC), VS IN (BNC)
32 (15/18)
M2x4
49 (115/16)
57 (21/4)

110 (43/8)
9 (3/8)

70 (27/8) 121.2 (43/8)

Unit: mm (inch)

–239–
 1-1. Colour video cameras

SSC-DC14P/DC18P
CCD colour video camera
•Especially designed for surveillance applications •High
density 1/3-inch IT Hyper HAD CCD offers high horizontal
resolution of 470 TV lines and high sensitivity with a
minimum illumination of 1.9 lx (F1.2) •Excellent signal-to-
noise ratio of 50 dB •Digital control Smart Control function
executes the intelligent and flexible automatic backlight
compensation •Turbo AGC raises sensitivity by automatically
SSC-DC14P SSC-DC18P
controlling video gain in a range that is 6 dB wider than the
normal AGC range •Aperture/Sharp Mode makes object
outlines sharper in the reproduced picture •CCD IRIS
function allows use of inexpensive manual iris lenses •Two Lenses are optional
alternative automatic white balance control modes: ATW
(Auto Tracing White Balance)/ATW pro •Accepts 2 types of
auto iris lenses (DC servo type/Video servo type) •Accepts
both CS and C-mount lenses •External synchronization with SSC-DC14P SSC-DC18P
AC line lock •Selection of power source: AC 24 V for
SSC-DC14P, AC 220 to 240 V for SSC-DC18P
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual
Optional accessories: Auto iris lens VCL-4V8WEA (3.5 to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.3)

Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 752 (H) × 582 (V)
Sensing area: 4.4 mm × 3.3 mm
Video signal system: PAL standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with AC line lock (SSC-DC14P:
AC 24 V, SSC-DC18P: AC 220 to 240 V)
Horizontal resolution: 470 TV lines
Lens mount: C/CS-mount (Back focus adjustable)
Minimum illumination: AGC ON (TURBO mode)
1.2 lx at F1.2 (30 IRE)
1.9 lx at F1.2 (50 IRE)
Dimensions
13 lx at F1.2 (100 IRE)
1/4" UNC (20pitch)
Aperture: SHARP/NORMAL switchable
Enhancer: 3H
SURVEILLANCE

Automatic Gain Control: TURBO/NORMAL/OFF switchable

PRODUCTS

Phase control: V-phase control (±90°)

CCD IRIS control: ON/OFF switchable
White balance: ATW pro/ATW switchable
Backlight compensation: Smart Control
Signal-to-noise ratio: 50 dB (Weight ON, AGC OFF)
32 (15⁄16)
Video out: 1.0 Vp-p, 75 Ω, sync negative M2x4
Operating temperature: –10 to 50°C (14 to 122°F ) 53 (21⁄8)
Storage temperature: –40 to 60°C (–40 to 140°F )
Power requirements: SSC-DC14P: AC 24 V
SSC-DC18P: AC 220 to 240 V Digital
57 (21⁄4)

Power consumption: SSC-DC14P: 4.5 W

SSC-DC18P: 5.5 W
Mass: SSC-DC14P: Approx. 550 g (1 lb 3 oz)
SSC-DC18P: Approx. 770 g (1 lb 11 oz)
Auto iris lens: DC/VIDEO driven type
9 (3⁄8)

Connectors: SSC-DC14P: AC 24 V terminals, LENS (4-pin) 70 (27⁄8) 130 (51⁄8)

VIDEO OUT (BNC), GND 141 (55⁄8)
SSC-DC18P: LENS (4-pin),VIDEO OUT (BNC)
Unit: mm (inch)

–240–
1-1. Colour video cameras

SSC-C108P/C104P
CCD colour video cameras
•Especially designed for surveillance applications •1/3-inch
IT Hyper HAD CCD offers extremely high sensitivity with a
minimum illumination of 0.9 lx (F1.2) •Excellent signal-to-
noise ratio of 52 dB •Automatic backlight compensation
•Turbo AGC improves sensitivity by boosting its video gain
over the AGC range •CCD IRIS function allows use of
inexpensive manual iris lenses •ATW (Auto Tracing White
Balance) for white balance adjustment •Accepts 2 types of
auto iris lenses (DC servo type/Video servo type) •Accepts
both CS and C-mount lenses •External synchronization with
AC line lock •AC 220 to 240 V power operation (SSC-C108P) Lens is optional
•AC 24 V power operation (SSC-C104P)
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual SSC-C108P SSC-C104P
Optional accessories: Auto iris lens VCL-4V8WEA (3.5 to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.3)
Mounting bracket YT-B21

Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 500 (H) × 582 (V)
Sensing area: 4.4 × 3.3 mm
Video signal system: PAL standard
Scanning system: 625 lines, 2:1 interlace
Sync system: External with AC line lock
Horizontal resolution: 330 TV lines
Lens mount: C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)
0.9 lx at F1.2 (40 IRE)
1.2 lx at F1.2 (50 IRE)
Enhancer: 3H
Automatic Gain Control: TURBO/NORMAL/OFF switchable
Phase control: V-phase control (±90°)
CCD IRIS: 1/50 to 1/100000 (seconds) Dimensions
CCD IRIS control: ON/OFF switchable
White balance: ATW 1/4" UNC (20pitch)
Backlight compensation: BLC ON/OFF switchable
Signal-to-noise ratio: More than 52 dB (AGC OFF, Weight ON)
Video out: 1.0 Vp-p, 75 Ω, sync negative

SURVEILLANCE
Operating temperature: –10 to 50°C (14 to 122°F )

PRODUCTS
Storage temperature: –40 to 60°C (–40 to 140° F )
Power requirements: C108P: AC 230 V, 50 Hz
C104P: AC 24 V, 50 Hz
Power consumption: C108P: 4.0 W 32 (15⁄16)
M2x4
C104P: 3.5 W 53 (21⁄8)
Mass: C108P: 760 g (1 lb 11 oz)
C104P: 550 g (1 lb 2 oz)
Auto iris lens: DC/VIDEO driven type
57 (21⁄4)

Connectors: C108P: VIDEO OUT (BNC), LENS (4-pin)

C104P: VIDEO OUT (BNC), LENS (4-pin), AC 24 V
terminals, GND
9 (3⁄8)

70 (27⁄8) 130 (51⁄8)

141 (55⁄8)
Unit: mm (inch)

–241–
 1-1. Colour video cameras

SSC-C370P
CCD colour video camera
•Especially designed for surveillance applications •High
density 1/2-inch IT Hyper HAD CCD offers extremely high
resolution of 470 TV lines and high sensitivity with a
minimum illumination of 2.5 lx (F1.2) •Excellent signal-to-
noise ratio of 48 dB •CCD IRIS function allows use of
inexpensive manual iris lenses •Two alternative automatic
white balance control modes: AWB (Auto White
Balance)/ATW (Auto Tracing White Balance) •Variable
speed electronic shutter •Accepts C-mount lenses •External
synchronization with VS or VBS* •Single cable operation
(video/sync/power triple multiplexing transmission) for easy Lens is optional
installation with the optional YS-W150P/W250P Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)

Supplied accessories: Lens connector

Lens mount cap
Operating instruction manual
Optional accessories: Camera adaptor YS-W150P, YS-W250P
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
VCL-S12XM (12 mm, F1.2)
Auto iris lens VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)

Specifications

Image device: 1/2-inch Interline Transfer Hyper HAD CCD

Picture elements: 752(H) × 582(V)
Sensing area: 6.3 mm × 4.7 mm
Video signal system: PAL standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS (VBS)*
Horizontal resolution: 470 TV lines
Lens mount: C-mount (Back focus adjustable) Dimensions
Minimum illumination: AGC ON
2.5 lx at F1.2
Enhancer: 3H
Automatic Gain Control: ON/OFF switchable
SURVEILLANCE
PRODUCTS

Electronic shutter: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,

64 (25⁄8)

1/4000, 1/10000 (seconds)

Phase control: H-phase control
CCD IRIS control: ON/OFF switchable
White balance: ATW/AWB switchable
Signal-to-noise ratio: 48 dB (AGC OFF) 40.5 (15⁄8)
Video out: 1.0 Vp-p, 75 Ω, sync negative 155 (61⁄8)
Operating temperature: –10 to 50°C (14 to 122°F) 164.9 (61⁄2)
Storage temperature: –40 to 60°C (–40 to 140°F)
Power requirements: DC 24 V from YS-W150P/W250P or DC
12 V from DC 12 V power supply
Power consumption: 4.0 W supplied from YS-W150P/W250P or
57 (21⁄4)

2.8 W at DC 12 V
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Mass: Approx. 660 g (1 lb 7 oz)
Connectors: DC 12 V terminals, LENS (4-pin) Unit: mm (inch)
Mode A (Triple multiplexing operation): DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12 V operation): VIDEO OUT (BNC),
VS IN (BNC)

*The SSC-C370P accepts VBS signals for external synchronization, however, the burst signal is not locked.

–242–
 1-2. Monochrome video cameras

SPT-M320CE/M324CE/M328CE
CCD monochrome video cameras
•Especially designed for surveillance applications •1/3” IT
HAD CCD •Exwave HAD technology offers extremely high
sensitivity with a minimum illumination of 0.07 lx (F1.2)
•Outstanding horizontal resolution of 570 TV lines •CCD IRIS
function allows use of inexpensive manual iris lenses SPT-M320CE

•Backlight compensation is possible with the LEVEL and

BLC volume controls (only when using auto iris lenses or the
CCD IRIS function) •DC servo circuit drives auto iris facility
•Accepts C or CS-mount lenses

Exclusive features of SPT-M320CE

•External synchronization with VS •Single cable operation SPT-M324CE SPT-M328CE
(video/sync/power triple multiplex transmission) for easy
installation with the optional YS-W150P/W250P camera
adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode B) •12 V DC power supply can
also be used (Mode B)

Exclusive features of SPT-M324CE/M328CE

•External synchronization with VS or AC Line Lock • AC 24 V
(SPT-M324CE)/AC 220 to 240 V (SPT-M328CE) power
operation
SPT-M320CE SPT-M324CE SPT-M328CE
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual

Specifications
Image device: 1/3-inch Interline Transfer HAD CCD Connectors: M320CE: DC 12 V terminals
Picture elements: 752 (H) × 582 (V) LENS (4-pin)
Sensing area: 4.8 mm × 3.6 mm Mode A: DC IN/VS IN/VIDEO OUT
Video signal system: CCIR standard (BNC), MONITOR OUT(BNC)
Scanning system: 625 lines, 2:1 interlace Mode B: VS IN/VIDEO OUT (BNC)
Sync system: SPT-M324CE/M328CE: External with AC line lock M324CE: VIDEO OUT (BNC), LENS (4-pin), AC 24
SPT-M320CE: Internal or external with VS or V terminal, GND
MPX-VS M328CE: VIDEO OUT (BNC), LENS (4-pin)
Horizontal resolution: 570 TV lines
Lens mount: C/CS-mount (Back focus adjustable)
Minimum illumination: AGC ON 0.04 lx at F1.2 (30 IRE)

SURVEILLANCE
AGC ON 0.07 lx at F1.2 (50 IRE)

PRODUCTS
AGC ON 0.3 lx at F1.2 (100 IRE)
Automatic Gain Control: Turbo AGC permanently ON
Phase control: V-phase adjustment (±90°)
CCD IRIS: 1/50 to 1/100000 (seconds)
CCD IRIS control: ON/OFF switchable
Backlight compensation: Adjustable
Signal-to-noise ratio: More than 50 dB (AGC OFF)
Video out: BNC, 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 to 50°C (14 to 122°F)
Storage temperature: -40 to 60°C (-40 to 140°F)
Power requirements: M320CE: 1) Multiplexing with YS-W150P/W250P
2) 12 V DC V from DC 12 V power supply
M324CE: AC 24 V, 50 Hz
M328CE: AC 220 to 240 V, 50 Hz
Power consumption: M320CE: 2.8 W supplied from YS-W150P/W250P
2.4 W at 12 V
M324CE: 2.6 W
M328CE: 3.8 W
Mass: M320CE: 410 g (14 oz)
M324CE: 340 g (12 oz)
M328CE: 770 g (1 lb 11 oz)
Auto iris lens: DC servo type

Dimensions:
SPT-M320CE SPT-M324CE SPT-M324CE
SPT-M320CE/
M324CE/M328CE
10.5 10.5 10.5
57 (2 1/4) 140 (5 5/8) (7/16) 115 (4 5/8) (7/16) 165 (6 1/2) (7/16)

C CS
50 (2 )

CS
C

7.5 (5/16)

–243–
 1-2. Monochrome video cameras

SPT-M128CE/M124CE/M122CE
CCD monochrome video camera
•Especially designed for surveillance applications •1/3-inch
IT Hyper HAD CCD •High horizontal resolution of 380 TV
lines •High sensitivity with a minimum illumination of 0.1 lx at
F1.2 (50 IRE) •Excellent signal-to-noise ratio of 45 dB •CCD
IRIS allows the use of inexpensive manual iris lens SPT-M128CE SPT-M124CE
•Backlight compensation is possible with the Level and BLC
(Back Light Control) volume controls (when using auto iris
lenses or the CCD IRIS function) •AGC (Automatic Gain
Control) •Accepts both DC servo and VIDEO servo auto iris
lenses •Accepts both CS and C-mount lenses •Alternative
power source operation: DC 12 V for the SPT-M122CE, AC
Lenses are optional SPT-M122CE
24 V for the SPT-M124CE, AC 220 to 240 V for the SPT-
M128CE •4-pin auto iris connector •External synchronization
with AC line lock (SPT-M128CE/M124CE)
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual
Optional accessories: Auto iris lens VCL-4V8WEA (3.5 to 8.0 mm, F1.4)
VCL-S02WEAP (2.8 mm, F0.8)
VCL-3ADXEA (3.8 mm, F0.8)

Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 500(H) × 582(V)
Sensing area: 4.4 × 3.3 mm
Video signal system: CCIR standard
Scanning system: 625 lines, 2:1 interlace SPT-M128CE SPT-M124CE SPT-M122CE
Sync system: SPT-M128CE/M124CE: External with AC line lock
SPT-M122CE: Internal
Horizontal resolution: 380 TV lines
Lens mount: C/CS-mount (Back focus adjustable)
Minimum illumination: 0.06 lx at F1.2 (30 IRE)
0.1 lx at F1.2 (50 IRE)
0.4 lx at F1.2 (100 IRE)
Automatic Gain Control: Always AGC ON
Phase control: V-phase control (SPT-M128CE/M124CE)
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100000 (seconds)
Signal-to-noise ratio: More than 45 dB (AGC ON)
Video out: 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: -10 to 50 °C (14 to 122 °F)
Storage temperature: -40 to 60 °C (-40 to 140 °F)
SURVEILLANCE
PRODUCTS

Power requirements: SPT-M128CE: AC 220 to 240 V

SPT-M124CE: AC 24 V
SPT-M122CE: DC 12 V
Power consumption: SPT-M128CE: 3.5 W
SPT-M124CE: 2.5 W
SPT-M122CE: 2.4 W
Mass: SPT-M128CE: Approx. 750 g (1 lb 10 oz)
SPT-M124CE/M122CE: Approx. 320 g (11 oz)
Auto iris lens: DC/Video servo type
Connectors: SPT-M128CE: LENS (4-pin), VIDEO OUT (BNC)
SPT-M124CE: LENS (4-pin), VIDEO OUT (BNC),
AC 24 V terminals, GND
SPT-M122CE: LENS (4-pin), VIDEO OUT (BNC),
DC 12 V terminals Dimensions
SPT-M122CE/M124CE/M128CE

SPT-M122CE/M124CE

SPT-M128CE

–244–
1-2. Monochrome video cameras

SSC-M370CE
CCD monochrome video camera
•Especially designed for surveillance applications •High
density 1/2-inch IT Hyper HAD CCD offers extremely high
resolution of 570 TV lines and high sensitivity with a
minimum illumination of 0.3 lx (F1.2) •Excellent signal-to-
noise ratio of 50 dB •CCD IRIS function allows use of
inexpensive manual iris lenses •Variable speed electronic
shutter •Accepts C-mount lenses •External synchronization
with VS •Single cable operation (video/sync/power triple
multiplexing transmission) for easy installation with the
optional YS-W150P/W250P Camera Adaptor (Mode A)
•Monitor out function for on-the-spot camera positioning Lens is optional
(Mode A) •12 V DC power supply can also be used (Mode B)

Supplied accessories: Lens connector

Lens mount cap
Operating instruction manual
Optional accessories: Camera adaptor YS-W150P, YS-W250P
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
VCL-S12XM (12 mm, F1.2)
Auto iris lens VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)

Specifications
Image device: 1/2-inch Interline Transfer Hyper HAD CCD
Picture elements: 752 (H) × 582 (V)
Sensing area: 6.3 mm × 4.7 mm
Video signal system: CCIR standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS
Horizontal resolution: 570 TV lines
Lens mount: C-mount (Back focus adjustable)
Minimum illumination: AGC ON
0.3 lx at F1.2
Automatic Gain Control: ON/OFF switchable
Electronic shutter: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 (seconds) Dimensions
Phase control: H-phase control
CCD IRIS control: ON/OFF switchable
Signal-to-noise ratio: 50 dB (AGC OFF)

SURVEILLANCE
Video out: 1.0 Vp-p, 75 Ω, sync negative

PRODUCTS
64 (25⁄8)

Operating temperature: –10 to 50°C (14 to 122°F)

Storage temperature: –40 to 60°C (–40 to 140°F)
Power requirements: DC 24 V from YS-W150P/W250P or DC
12 V from DC 12 V power supply
Power consumption: 4.0 W supplied from YS-W150P/W250P or 40.5 (15⁄8)
2.8 W at DC 12 V
Maximum cable length: 300 m using RG-59B/U (3C-2V) 155 (61⁄8)
500 m using RG-6A/U (5C-2V) 164.9 (61⁄2)
600 m using RG-11A/U (7C-2V)
Mass: Approx. 660 g (1 lb 7 oz)
Connectors: DC 12 V terminals, LENS (4-pin)
Mode A (Triple multiplexing operation):
57 (21⁄4)

DC IN/VS IN/VIDEO OUT (BNC),

MONITOR OUT (BNC)
Mode B (DC 12 V operation):
VIDEO OUT (BNC), VS IN (BNC)
Unit: mm (inch)

–245–
 1-3. Camera accessories

YS-W150P
AC adaptor for
SSC-DC50AP/C370P/M370CE/DC10P, DXC-107AP
•Power supply and video/sync signal transmission by
connecting to the camera with a single coaxial cable
•Internal or external synchronization with VS or AC line lock
•Extends the cable length up to 600 metres by using 7C-2V
coaxial cable
Connectors: CAMERA IN (BNC)
VIDEO OUT (BNC × 2)
SYNC IN/OUT (BNC, loop-through, 75Ω ON/OFF)
Power requirements: AC 220 to 240 V, 50Hz
Power consumption: 15 W
Operating temperature: –10°C to 50°C (14°F to 122°F)
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Dimensions: 212(W) × 52(H) × 330(D) mm
(8 3/8 × 2 1/8 × 13 inches)
Mass: 1.9 kg (4 lb 3 oz)

YS-W250P
AC adaptor for
SSC-DC50AP/C370P/M370CE/DC10P, DXC-107AP
SURVEILLANCE
PRODUCTS

•Power supply and video/sync signal transmission by

connecting to the camera with a single coaxial cable •Up to
four cameras can be connected •Internal or external
synchronization with VS or AC line lock •Extends the cable
length up to 600 metres by using 7C-2V coaxial cable (SSC
series camera) or 300 metres with 5C-2V coaxial cable
(DXC-107AP)
Connectors: CAMERA IN 1 to 4 (BNC × 4)
VIDEO OUT A: 1 to 4 (BNC × 4)
VIDEO OUT B: 1 to 4 (BNC × 4)
SYNC IN/OUT (BNC, loop-through, 75 Ω ON/OFF)
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 48 W
Operating temperature: –10°C to 50°C (14°F to 122°F)
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Dimensions: 424 (W) × 52(H) × 330(D) mm
(16 3/4 × 2 1/8 × 13 inches)
Mass: 3.6 kg (7 lb 15 oz)

–246–
1-3. Camera accessories
YT-B21 Dimensions:

Mounting bracket ø130 (51/8)

•For indoor use

Supplied accessories: Mounting screw (×4)

Operating instruction
manual

136.6 (51/2)
Maximum load: 2 kg
Mass: 200 g

30 (turning point)
(13/16)

5.2 (7/32)
ø34 (13/8)

Unit: mm (inch)

T-301/305/307
Mounting bracket
•T-301 - Suitable for mounting housed or
unhoused cameras, T-305/307 - Only accept
unhoused cameras for installation

Maximum load: 10 kg
Length: T-301: 260 mm + 150 mm
T-305: Min.275 mm/Max.405 mm
T-307: 160 mm
Mass: T-301/305: 0.7 kg
T-307: 0.6 kg

T-301 T-305 T-307

SURVEILLANCE
PRODUCTS

–247–
 1-3. Camera accessories

Lenses for 1/3-inch CS-mount camera

1) Auto-iris Type
(DC servo type/
Non-EE
amplifier type/
Non-ALC type)
Models VCL-4V8WEA VCL-S02WEAP
Mount CS CS
Focal length 3.5 to 8.0 mm 2.8 mm
Iris control Auto Auto
Maximum aperture ratio 1 : 1.4 1 : 1.3
Minimum object distance 0.3 m 0.2 m
Filter size — M30.5 × 0.5 mm
Mass 72 g (3 oz) 41 g (1.4 oz)
Dimensions ø35.0 × 54.0 × 46.0 mm ø32.0 × 39.8 × 33.0 mm
(dia. × H × L) (17/16 × 21/4 × 113/16 inches) (15/16 × 15/8 × 15/16 inches)
Cable length 100 mm (4 inches) 310 mm (121/4 inch)

Lenses for 1/2-inch C-mount cameras

1) Auto-iris Type
(Video servo
type)

Models VCL-S03XEA VCL-S06XEA VCL-S12XEA

Mount C C C
Focal length 3.6 mm 6.0 mm 12 mm
Iris control Auto Auto Auto
Maximum aperture ratio 1 : 1.6 1 : 1.2 1 : 1.2
Filter size — M43 × 0.75 mm M43 × 0.75 mm
Mass 88 g (3.1 oz) 128 g (4.5 oz) 126 g (4.4 oz)
ø45(dia.) × 32.9(L) mm ø45.5(dia.) × 48.5(L) mm ø45.5(dia.) × 48.5(L) mm
Dimensions
(113/16 × 15/16 inches) (113/16 × 115/16 inches) (113/16 × 115/16 inches)
Supply voltage DC 8 to 16V DC 8 to 16V DC 8 to 16V

2) Manual-iris Type
SURVEILLANCE
PRODUCTS

Models VCL-S03XM VCL-S06XM VCL-S12XM

Mount C C C
Focal length 3.6 mm 6.0 mm 12 mm
Iris control Manual Manual Manual
Maximum aperture ratio 1 : 1.6 1 : 1.2 1 : 1.2
Filter size M35.5 × 0.5 mm M35.5 × 0.5 mm M35.5 × 0.5 mm
Mass 66 g (2.3 oz) 74 g (2.6 oz) 60 g (2.1 oz)
ø38(dia.) × 28.6(L) mm ø38(dia.) × 36.4(L) mm ø38(dia.) × 30.8(L) mm
Dimensions
(11/2 × 13/16 inches) (11/2 × 17/16 inches) (11/2 × 11/4 inches)

Aspherical auto-iris lens for 1/2-inch CS-mount cameras

(DC servo type)

Model VCL-3ADXEA
Mount CS
Focal length 3.8 mm
Iris control Auto
Maximum aperture ratio 1 : 0.8
Minimum object distance 0.15m
Filter size M43 × 0.75 mm
Mass 150 g (5.3 oz)
Dimensions ø45.0 × 56.8 × 52.5 mm
(dia. × H × L) (113/16 × 21/4 × 21/8 inches)
Cable length 90 mm (3 5/8 inch)

–248–
2-1. Colour monitors

SSM-9040P
Colour monitor
•PAL standard •Trinitron colour monitor especially designed
for surveillance applications •Adoption of beam current
feedback circuit for high black level stability •Automatic 75 Ω
termination facility •Front controls: Power, Brightness,
Chroma, Contrast •EIA standard 19-inch rack mountable
(with optional MB-507 mounting bracket) •Metal cabinet for
high immunity to external electrical and magnetic
interference
Supplied accessory: Operating instruction manual
Optional accessories: Rack mounting bracket MB-507
Blanking panel MB-509

Specifications
Video signal system: CCIR 625 lines, 50 fields
Colour system: PAL
CRT Type: 22 cm (9-inch) Trinitron tube, visible picture size
19.7 cm (8-inch) measured diagonally, 70° deflection
(AG pitch 0.5 mm)
Resolution: 250 TV lines at centre
Frequency response: 6.0 MHz (+1.5dB
–3.0dB)
Aperture correction: –4.0 dB to +6.0 dB (at 3.0 MHz)
Sync system: AFC time constant 1.0 ms
Normal scan: 6 % overscan
H-linearity: Less than 7.0 % (Typical)
V-linearity: Less than 7.0 % (Typical)
Convergence: Central: 0.4 mm (Typical)
Peripheral: 0.5 mm (Typical)
Raster size stability: H: 1.0 %
V: 1.5 %
HV-regulation: 3.0 % (Cut off to High light)
Colour temperature: 6500 K
Operating temperature: 0 to 35 °C (32 to 95 °F )
Storage temperature: –10 to 40 °C (14 to 104 °F )
Humidity: 0 to 90 %
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 39 W
Video input: BNC, 1 Vp-p, sync negative
Video output: Loop-through BNC, automatic 75 Ω termination*
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(85/8 × 85/8 × 14 inches)
Mass: Approx. 7.8 kg (17 lb 3 oz)

SURVEILLANCE
PRODUCTS

*75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–249–
 2-1. Colour monitors

SSM-14N5E (PAL/NTSC/SECAM/NTSC 4.43)

Colour monitor
•Trinitron colour monitor especially designed for surveillance
applications •High resolution of 500 TV lines •Adoption of
beam current feedback circuit for stability in the colour
balance •Accepts composite video and Y/C signals
•Automatic 75 Ω termination facility •On-screen menu for
adjustment/operation •Built-in speaker •EIA standard rack
mountable (with optional MB-502B and SLR-102) •Metal
cabinet for high immunity to external electrical and magnetic
interference
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
Picture tube: 37.1 cm (14-inch), HR Trinitron tube, visible
picture size 33.2 cm (min.) (13-inch) measured
diagonally, 90° deflection, EBU phosphors
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(135/8 × 133/8 × 165/16 inches)
Mass: 15 kg (33 lb 1oz)
VIDEO
LINE*2 Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*3
Loop-through Mini DIN 4-pin
Y (luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
C (chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*3

AUDIO
LINE Loop-through Phono
SURVEILLANCE

–5 dBu, high impedance

PRODUCTS

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–250–
2-1. Colour monitors

SSM-20N5E (PAL/NTSC/SECAM/NTSC 4.43)

Colour monitor
•Trinitron colour monitor especially designed for surveillance
applications •High resolution of 500 TV lines •Adoption of
beam current feedback circuit for stability in the colour
balance •Accepts composite video and Y/C signals
•Automatic 75 Ω termination facility •On-screen menu for
adjustment/operation •Built-in speaker •EIA standard rack
mountable (with optional SLR-103A) •Metal cabinet for high
immunity to external electrical and magnetic interference
Optional accessory: Slide rail kit SLR-103A

Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC4.43*1
Picture tube: 53 cm (20-inch), HR Trinitron tube, visible picture
size 48.0 cm (min.) (19-inch) measured diagonally,
90° deflection, EBU phosphors
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 105 W
Dimensions: 449 (W) x 441 (H) x 502 (D) mm
(1711/16 x 173/8 x 193/4 inches)
Mass: 28 kg (61 lb 11 oz)
VIDEO
LINE*2 Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*3
Loop-through Mini DIN 4-pin
Y (luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*3
C (chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*3
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*3
AUDIO
LINE Loop-through Phono
–5 dBu, high impedance

SURVEILLANCE
PRODUCTS

*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.

–251–
 2-2. Monochrome monitors

SSM-930CE
Monochrome monitor
•Especially designed for surveillance applications •CCIR
standard •9-inch CRT size •Excellent picture quality with
more than 750 TV lines horizontal resolution •Loop-through
video input with switchable 75 Ω termination •DC clamp
switch provides a stable reference for the black level •19-inch
EIA standard rack mountable for dual monitor configuration
•Front controls: Power H-hold, V-hold, contrast and
brightness •High immunity to external electrical and magnetic
interference
Supplied accessory: Operating instruction manual

Specifications
Video signal system: CCIR standard
Picture tube: 9-inch B/W measured diagonally, 90° deflection
Video input: Impedance 75 Ω/high switchable
Level 0.5 to 2.0 Vp-p, sync negative, BNC-type
Video output: Impedance more than 10 kΩ, loop-through,
BNC-type
Horizontal resolution: More than 750 TV lines (at centre)
Power requirements: AC 220 V, 50/60 Hz
Power consumption: 30 W
Operating temperature: 0 to 40 °C (32 to 104 °F)
Storage temperature: –10 to 65 °C (14 to 149 °F)
Dimensions: 220 (W) × 219 (H) × 252.8 (D) mm
(83/4 × 85/8 × 10 inches)
Mass: 5.8 kg (13 lb)
SURVEILLANCE
PRODUCTS

–252–
2-2. Monochrome monitors

SSM-125CE
Monochrome monitor
•Especially designed for surveillance applications •CCIR
standard •12-inch CRT size •Excellent picture quality with
more than 750 TV lines horizontal resolution •Dual loop-
through video inputs, with switchable 75 Ω termination
•Front controls: Power, INPUT select, H-hold, V-hold,
contrast and brightness •High immunity to external electrical
and magnetic interference
Supplied accessory: Operating instruction manual

Specifications
Video signal system: CCIR standard
Picture tube: 12-inch B/W measured diagonally, 90° deflection
Video input: Impedance 75 Ω/high switchable
Level 0.5 to 2.0 Vp-p, sync negative,
BNC-type (×2)
Video output: Impedance more than 10 kΩ, loop-through,
BNC-type (×2)
Horizontal resolution: More than 750 TV lines (at centre)
Power requirements: AC 230 V, 50/60 Hz
Power consumption 30 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: –10 to 40 °C (14 to 104 °F)
Dimensions: 296 (W) × 303 (H) × 300.5 (D) mm
(113⁄4 × 12 × 117⁄8 inches)
Mass: 9.2 kg (20 lb 5 oz)

SURVEILLANCE
PRODUCTS

–253–
 2-2. Monochrome monitors

SSM-175ACE
Monochrome monitor
•CCIR standard •17-inch CRT size •Excellent picture quality
with more than 850 TV lines horizontal resolution •Dual loop-
through video inputs, with switchable 75 Ω termination •DC
clamp switch provides a stable reference for the black level
•19-inch EIA standard rack mountable •High resistance to
external electrical and magnetic interference •Suitable for
many monitoring applications
Supplied accessory: Operating instruction manual
Optional accessory: Rack mounting bracket RMM-171

Specifications
Video signal system: CCIR standard
Picture tube: 17-inch B/W measured diagonally, 90° deflection
Video input: BNC (×2), level 0.5 to 2.0 Vp-p, sync negative,
75 Ω/high impedance switchable with loop-through
output
Horizontal resolution More than 850 TV lines (at centre)
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: 37 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: –10 to 40 °C (14 to 104 °F)
Dimensions: 424 (W) × 409 (H) × 380 (D) mm
(163/4 × 161/8 × 15 inches)
Mass: 17.5 kg (38 lb 9 oz)
SURVEILLANCE
PRODUCTS

–254–
2-2. Monochrome monitors

SSM-Q177CE
Monochrome quad monitor
•CCIR standard •Quad Screen Display permits up to four
compressed, split pictures to be displayed simultaneously
and recorded on a single VCR •High quality compressed
images with 8-bit signal processing for clearer pictures
•Sequential Switcher Function provides automatic switching
between up to four cameras, with a selectable dwell time;
SKIP channel also selectable •Newly developed flyback
transformer provides the high voltage stability required to
minimise picture zooming •Freeze Picture Function can
freeze each picture in quad mode, as well as freeze a VCR
playback picture •Alarm IN/OUT with audible alarm and
flashing LED •Video Loss Detection with on-screen
notification •On-screen menus display Date, Time and
Camera ID •19-inch EIA standard rack mountable
Supplied accessory: Operating instructions
Optional accessory: Rack mounting bracket RMM-171

Specifications:
Video signal system: CCIR standard
Picture tube: 17-inch CRT, measured diagonally,
90° deflection
Resolution: More than 850 TV lines (full screen)
Camera input/VCR input:
Composite: 1.0 Vp-p, sync negative, 75 Ω
Video output/VCR output:
Composite: 1.0 Vp-p, sync negative, 75 Ω
Power requirements: AC 230 V, 50/60 Hz
Power consumption: Approx. 45 W
Operating temperature: 0 to 35 °C (32 to 95 °F)
Storage temperature: -10 to 40 °C (14 to 104 °F)
Operating humidity: 0 to 90 % (no condensation)
Storage humidity: 0 to 90 % (no condensation)
Dimensions: 424 (W) × 409 (H) × 380 (D) mm
(16 6⁄8 × 16 1⁄8 × 15 inches)
Mass: 18.8 kg (41 lb 6 oz)
Regulation compliance: EN 60 065 (TÜV), CE (EMC, LVD), C-Tick Mark

SURVEILLANCE
PRODUCTS

–255–
 3. Switchers

YS-S6
Six-channel sequential switcher
•Compact-size sequential switcher for small surveillance
systems •Accepts also NTSC/EIA signal •Six video inputs
with loop-through capability •The pictures from up to six
video cameras can be monitored seqentially via the SELECT
VIDEO OUT •Dwell time is selectable anywhere from 1 to 30
seconds per camera input •INPUT SELECT button gives
manual selection of a specific camera •SKIP function for
unused video input channel
Supplied accessory: Operating instruction manual

Note: AC adaptor is an option.

Specifications
General
Power requirements: DC 9 V
Power consumption: Approx. 1 W
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to 60°C (–4 to 140°F)
Dimensions: 220 (W) × 96 (H) × × 265.5 (D) mm
(8 3/4 × 3 7/8 × 10 1/2 inches)
Mass: Approx. 2.1 kg (4 lb 10 oz)

Inputs
VIDEO INPUT 1 to 6: BNC type, 1.0 Vp-p, 75 Ω, unbalanced, sync
negative
DC IN: DC jack type,
DC 9 V (DC 7 V to 15 V is permissible)

Outputs
VIDEO OUTPUT 1 to 6: BNC type, loop-through output of VIDEO INPUT,
75 Ω termination ON/OFF switchable
SELECT VIDEO OUT: BNC type, 1.0 Vp-p, 75 Ω, unbalanced,
sync negative
SURVEILLANCE
PRODUCTS

–256–
4 Quad switcher

YS-Q440P
Quad switcher
•High performance Quad Image Splitter with an auto
sequential switcher • Up to four compressed, split pictures
can be simultaneously displayed on a single monitor and
recorded on a single VCR •Automatic switching between up
to four cameras can also be performed on a monitor and the
switching interval can be selected in one second intervals
from 1 to 30 seconds •Either asynchronous or synchronous,
colour or black & white cameras can be connected •8-bit
signal processing and four field memories provide high
picture quality compressed images •Up to eight characters
can be superimposed onto each of the four compressed
pictures •The built-in date and time generator allows time
and date information to be displayed •Freeze picture function
(Quad mode only) •Alarm function •Video loss detection
•RS-232 Remeto control port
Supplied accessories: Rack mounting bracket (for EIA standard rack)
AC power cord
Operating instruction manual

Specifications
General
Video signal system: CCIR/PAL standard
Power requirements: AC 220 to 240 V, 50 Hz
Power consumption: Less than 10 W
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Dimensions: 430(W) × 44(H) × 350(D) mm
(17 × 1 3⁄4 × 12 7⁄8 inches)
(without projecting parts and controls)
Mass: Approx. 3.8 kg (8 lb 4 oz)
Video input/output
Video input: VIDEO INPUT CH1 to CH4, 1.0 Vp-p, 75 Ω
automatic termination
Input (BNC type) x 4
Loop through output (BNC type) x 4
Video output: VIDEO OUT (BNC type) x 1
Quad-picture image signal
1.0 Vp-p, 75 Ω
VIDEO OUT (BNC type) x 1
Quad, Sequential, Full screen signal (selectable)
1.0 Vp-p, 75 Ω

SURVEILLANCE
PRODUCTS
Sync
External SYNC IN 1.0 Vp-p, 75 Ω VBS or VS signal
External SYNC OUT 1.0 Vp-p, 75 Ω VBS or VS signal

Control
Remote connector: REMOTE (D-sub 9 pin RS-232C port)
Alarm input: ALARM IN terminal x 4
CMOS “L” level or MAKE
Alarm output: ALARM OUT terminal x 1
Relay Out, switching DC 30 V at up to 2 A
RESET OUT terminal x 1
Open Collector Output up to 12 V 20 mA
Other
Alarm hold duration: 1 to 30 s (one second increments)
30 to 180 s (ten second increments)
Manual
Auto sequential duration: 1 to 30 s (one second increments)
Picture tone: 8-bit video (256 gradations)

–257–
 5. Multiplexers

YS-DX316P/DX216CE
Multiplexer
•Full duplex video multiplexer with up to 16 camera inputs
•Either asynchronous or synchronous cameras can be
connected •Multiplex recording to one VCR while switching
between each camera by a field for precise surveillance of YS-DX316P
multiple points •Long time recording with Time Lapse VCR
•Video loop through for up to 16 cameras •Live pictures can
be displayed in full screen, sequence, multi-screen
(4/7/10/13/16) while simultaneously recording •Auto
sequential switching in quad mode in addition to full screen
sequence switching •Playback can be reviewed in full
screen, sequence, and multi-screen (4/7/10/13/16) YS-DX216CE
•Recorded images can be played back in the bottom right
screen of the 13 or 16-picture display simultaneously with
live images •Live images can be displayed in the bottom right
screen of the 13 or 16-picture display simultaneously with
recorded images •MONITOR 2 can be used for spot
monitoring •Freeze picture function in both live and playback
mode •Electronic zoom (x2) function in both live and play
back mode •Built in time/date and camera title generator YS-DX316P

•Easy on screen setup •16 alarm inputs, each corresponding

to a camera input •Programmable freeze, zoom and buzzer
functions in 16-picture split mode for alarm inputs •Alarm
monitor function automatically provides independent
monitoring of channels in which alarms occur on MONITOR
2 •Programmable alarm recording time mode •Alarm memory YS-DX216CE

function can store up to 100 alarm events (camera number,

date and time) •Video loss detection function •Remote
control capability via a D-sub 25-pin •Compact 1U height unit
and rack mount capability
Supplied accessories: Rack mount kit (for EIA standard rack) (1)
D-sub 25-pin plug components (1)
Operating manual (1)

Specifications
General
Video Signal System: DX316P: PAL standard, DX216CE: CCIR standard
SURVEILLANCE

Power requirements: AC 120 V, 50 Hz

PRODUCTS

Power consumption: DX316P: 22 W

DX216CE: 16W
Operating temperature: 0 to 45° C (32 to 113° F)
Mass: 4.2 kg (9 lb 4 oz)
Video inputs
Camera input 1 to 16: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
VCR input: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω, Auto
termination type
DX216CE: BNC type, VS, 1.0 Vp-p, 75 W
S-VHS Y/C inputs: DX316P only: Din Connector, Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Video outputs
Camera output 1 to 16: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
Monitor 1 output: DX316P: BNC type x 1, VS or VBS
DX216CE: BNC type x 1, VS Dimensions
Monitor 2 output: DX316P: BNC type x 1, VS or VBS
DX216CE: BNC type x 1, VS
VCR output: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
S-VHS Y/C output: DX316P only: Din Connector, Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Other
Synchronization: Asynchronous individual inputs
Alarm output: DC 5 V 5.7 kW
Alarm duration: 10, 20, 30, 40, 50, 60, CC* s
Switch input from VCR: Low active 100 kW pull-up
Control terminal: D-sub 25 pin:
Alarm input: contact close (x 16)
Remote control input
Sequence time: 0.5 to 30 s (0.5 s increments)
On-screen display: 8 character title, date/time
Buzzer: ON/OFF

* Stays in alarm mode for as long as alarm input remains active

–258–
5. Multiplexers

YS-SX310P/SX210CE
•Simplex video multiplexer with up to 10 camera inputs
•Either asynchronous or synchronous cameras can be
connected •Multiplex recording to one VCR while switching
between each camera by a field for precise surveillance of
multiple points •Long time recording with Time Lapse VCR YS-DX310P
•Video loop through for up to 10 cameras •Live pictures can
be displayed in full screen or in full screen or sequence while
simultaneously recording •Multi-screen (4/7/10) live images
can be displayed* •Playback can be reviewed in full screen,
sequence, and multi-screen (4/7/10) •Freeze picture function
in live and play back mode •Electronic zoom (x2) function in
live and play back mode •Built in time/date and camera title
YS-DX210CE
generator •Easy on screen setup •10 alarm inputs, each
corresponding to a camera input •Alarm monitor function
automatically provides independent monitoring of channels
on which alarms occur •Programmable alarm recording time
mode •Alarm memory function can store up to 100 alarm
events (camera number, date and time) •Video loss detection
function •Remote control capability via a D-sub 25-pin
•Compact 1U height unit and rack mount capability
* This feature is not applicable when unit recording with a VCR

Supplied accessory: Rack mount kit (for EIA standard rack) (1) YS-DX310P/DX210CE
D-sub 25-pin plug components (1)
Operating manual (1)

Specifications
General
Video Signal System: SX310P: PAL standard, SX210CE: CCIR standard
Power requirements: AC 220-240 V, 50 Hz
Power consumption: SX310P: 15 W
SX210CE: 12 W
Operating temperature: 0 to 45° C (32 to 113° F)
Mass: 4.2 kg (9 lb 4 oz)
Video inputs
Camera input 1 to 10: SX310P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
SX210CE: BNC type, VS, 1.0 Vp-p, 75 Ω
VCR input: SX310P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω,
Auto termination type
SX210CE: BNC type, VS, 1.0 Vp-p, 75 W

SURVEILLANCE
Video outputs
Camera output 1 to 10: SX310P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω

PRODUCTS
SX210CE: BNC type, VS, 1.0 Vp-p, 75 Ω
Monitor output: SX310P: BNC type x 1, VS or VBS
SX210CE: BNC type x 1, VS
VCR output: SX310P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
SX210CE: BNC type, VS, 1.0 Vp-p, 75 Ω
Other
Synchronization: Asynchronous individual inputs
Alarm output: DC 5 V 5.7 kW
Alarm duration: 10, 20, 30, 40, 50, 60, CC* s
Switch input from VCR: Low active 100 kW pull-up
Control terminal: D-sub 25 pin:
Alarm input: contact close (x 10)
Remote control input
Sequence time: 0.5 to 30 s (0.5 s increments)
On-screen display: 8 character title, date/time
Buzzer: ON/OFF
Dimensions

* Stays in alarm mode for as long as alarm input remains active

–259–
 6-1. Time lapse video recorders

SVT-L230P
Time lapse videocassette recorder
•Sony’s ‘RealAction’ technology allows high density
recording of 16.6 fields per second •Maximum 96-hour time
lapse recording mode is available with a 240-minute tape
TIME MODE (h) 8 24 40 64 96
INTERVAL (s) 1/50 1/20 1/12 0.15 0.22

•Maximum 72-hour time lapse recording mode is available

with a 180-minute tape
TIME MODE (h) 6 18 30 48 72
INTERVAL (s) 1/50 1/20 1/12 0.15 0.22

•Adaptive Picture Control (APC) delivers optimum picture

quality to the recording image •Audio recording and playback
are possible in 8, 24, 40-hour modes (E-240) and in 6, 18,
30-hour modes (E-180) •Built-in time and date generator
allows time and date information to be displayed along with
the Alarm count and Recording/Playback speed •Various
recording modes such as Auto Repeat Recording, Timer
Recording, Alarm Recording and Series Recording for
versatile situations •Daylight Saving Time setting function
•Holiday setting function •Camera switcher interface •Quick
recording check function •By using alarm recall, scan and
search functions, pictures recorded during alarm mode can
be easily checked •Field-by-field picture playback capability
•External timer input capability •Automatic clock adjusting is
possible when several VTRs are used •On-screen display
permits easy-to-follow operation •Auto head cleaning
function •Tape before-end / Tape-end signal output
capabilities •Warning signal output capability •Buzzer
function •Power-failure protection for up to 30 days •Security
lock function for avoiding accidental operation errors •Loop-
through capability enables video and audio to be output
through to the monitor automatically •Clog detection function
•Remote control capability of basic operational functions
through ø3.5 mm mini jack •External control capability via an
optional RS-232C interface
SURVEILLANCE
PRODUCTS

Supplied Accessories: AC power cord

Operation manual
Optional Accessories: SVT-RM10 Remote control unit
SVT-RS1A Computer Interface Board
TLV parts kit TPK-888P

Specifications
General
Mass: 5.8 kg (12 lb 9 oz) Distortion: Less than 4%
Dimensions: 420 (W) × 100 (H) × 340 (D) mm Audio signal-to-noise ratio:
(16 5⁄8 × 4 × 13 1⁄2 inches) 40 dB
Power requirements: AC 220 to 240 V, 50 Hz Others
Power consumption: 17 W Alarm input: Low level
Operating temperature: 5 to 40 °C (41 to 104 °F) Alarm output: +5 V, 5.7 kΩ (Low active)
Operating humidity: Less than 80% Switch output: +5 V, 5.7 kΩ
System Tape end output: +5 V, 5.7 kΩ (Low active)
Video signal: CCIR standard (monochrome)/ PAL (colour) Warning output: +5 V, 5.7 kΩ (Low active)
Recording playback system: Timer output: +5 V, 5.7 kΩ (High active)
Rotary four-head helical scanning system External timer input: Low level
Tape speed: 11.70 mm/second (6 or 8-hour mode) Clock set output: +5 V, 5.7 kΩ (Low active)
Recording/Playback mode: Clock set input: Low level
8, 24, 40, 64, 96 hours (with an E-240 tape) Series output: +5 V, 5.7 kΩ (Low active)
6, 18, 30, 48, 72 hours (with an E-180 tape) Remote control input: 3.5 mm mini jack (1)
Fast forward/Rewind time:
Approx. 2.5 minutes (with an E-180 tape)
Video
Input: 1.0 Vp-p, 75 Ω, unbalanced (BNC-type)
Output: 1.0 Vp-p, 75 Ω, unbalanced (BNC-type)
Horizontal resolution: Colour mode: More than 240 TV lines
Black & white mode: More than 320 TV lines
Signal-to-noise ratio: 42 dB
Audio
Audio recording system: Monaural
Input: -7.8 dBu, 47 kΩ (Phono jack)
Output: -7.8 dBu, 600Ω (Phono jack)
Microphone input: -60 dBu, 600 Ω (3.5 mm mini jack)

–260–
6-1. Time lapse video recorders

SVT-5050P
Colour time lapse videocassette recorder
•12 different time lapse recording/playback modes are
available in addition to the standard mode (3 hour time
mode) with a normal 180-minute tape
TIME MODE (h) 3 12 24 48 72 96 120 168 240 360 480 720 960
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14 1.62 2.42 3.22 4.82 6.42

Note: In time lapse modes, it is possible to additionally record three hours

longer than the original modes.

•Adaptive Picture Control (APC) delivers optimum picture

quality to the recording image •A tape recorded in the 3-hour
mode can be played back by any VHS VCR •Audio recording
and playback are possible in 3,12 and 24-hour modes •Built-
in time and date generator allows a required scene to be
easily searched by presetting the desired time and date
•Multiple recording modes such as Auto Repeat Recording,
Timer Recording, Alarm Recording, One-shot Recording and
Series Recording for versatile situations •Holiday setting
function •Daylight Saving Time setting function •Quick
recording check function •By using alarm recall/scan/search
functions, pictures recorded during alarm mode can also be
easily checked •Field-by-field picture playback capability
•External timer input capability •Automatic clock adjusting
possible when several VCRs connected •On-screen display
permits easy-to-follow operation •Auto head cleaning
function •Tape before-end signal output/Tape-end output
capability •Warning signal output capability •Buzzer setting
function •Power-failure protection for up to 30 days •Security
lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5mm mini jack
Supplied accessories: AC power cord Audio
Operating instruction manual Audio recording mode: 3, 12 and 24-hour mode
Optional accessories: RS-232C interface board SVT-RS1A Input: –7.8 dBu, 47 kΩ (phono jack)
Remote control unit SVT-RM10 Output: –7.8 dBu, 600 Ω (phono jack)
–60 dBu, 600 Ω (ø3.5 mm mini jack)

SURVEILLANCE
TLV parts kit TPK-887P Microphone input:

PRODUCTS
Others
Specifications
Alarm input: Low level
Alarm output: +5 V, 5.7 kΩ (Low active)
General
Switch output: +5 V, 5.7 kΩ (Low active)
Power requirements: AC 220 to 240 V, 50/60 Hz
Tape end output: +5 V, 5.7 kΩ (Low active)
Power consumption: 18 W
Warning output: +5 V, 5.7 kΩ (Low active)
Operating temperature: 5 to 40°C (41 to 104°F)
Timer output: +12 V, 5.7 kΩ (high active)
Operating humidity: Less than 80%
External timer input: Low level
Dimensions: 420 (W) × 100 (H) × 349 (D) mm
Clock set output: +5 V, 5.7 kΩ (Low active)
(165/8 × 4 × 133/4 inches)
Clock set input: Low level
Mass: Approx. 5.5 kg (12 lb 2 oz)
Series output: +5 V, 5.7 kΩ (Low active)
Tape speed: 23.39 mm/sec (3-hour mode)
Series input: Low level
Recording/playback time: 3, 12, 24, 48, 72, 96, 120, 168, 240, 360, 480, 720
One-shot input: Low level
and 960 hours (with an E-180 tape) (One shot mode
Alarm reset: Low level
is also available)
Control terminals: ø3.5 mm mini jack
Alarm recording speed: 3, 12-hour mode, NC*1
Optional RS-232C interface (D-sub 9-pin)
Alarm recording duration: 20 s, 40 s, 1 m, 2 m, 3 m, 4 m, 5 m, CC*2
Fast forward/rewind time: Approx. 4 minutes (with an E-180 tape)

Video
Recording system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass transformation
direct recording
Input: 1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Output: 1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Horizontal resolution: Colour mode: More than 240 TV lines
Black & White mode: More than 350 TV lines
Signal-to-noise ratio: 43 dB

Notes: *1 No change of recording speed

*2 Duration of alarm recording continues for as long as alarm input remains active.

–261–
 6-1. Time lapse video recorders

SVT-S3050P
S-VHS Time Lapse Videocassette Recorder
•High horizontal resolution of 400 TV lines using S-VHS
format •Excellent signal-to-noise ratio of 45 dB •7 different
time lapse recording/playback modes are available in
addition to the standard mode (3-hour time mode) with a
normal 180-minute tape
TIME MODE (h) 3 12 24 48 72 96 120 168
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14

Note : In time lapse mode, it is possible to additionally record three hours

longer than original modes.
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •A tape recorded in the 3-hour
mode can be played back by any S-VHS or VHS VTR •Audio
recording and playback are possible in 3, 12 and 24-hour
modes •Built-in time and date generator allows time and date
information to be displayed along with the Alarm count and
Recording/Playback speed •Various recording modes such
as Auto Repeat Recording, Timer Recording and Alarm
Recording for versatile situations •Holiday setting function
•Daylight Saving Time setting function •Quick recording
check function •By using alarm recall and scan functions,
pictures recorded during alarm mode can be easily checked
•Field-by-field picture playback capability •External timer
input capability •Automatic clock adjusting is possible when
several VTRs are connected •On-screen display permits
easy-to-follow operation •Auto head cleaning function •Tape
before-end signal output/Tape-end output capability
•Warning signal output capability •Buzzer setting function
•Power-failure protection for up to 30 days •Security lock
function for avoiding accidental operation errors •External
control capability via an optional RS-232C interface •Remote
control capability of basic operational functions through ø3.5
mm mini jack (optional Remote Control Unit SVT-RM10)
Supplied Accessories: AC power cord (1)
Operation manual (1)
Optional Accessory: RS-232C interface board SVT-RS1A
SURVEILLANCE

Remote control unit SVT-RM10

PRODUCTS

TLV parts kit TPK-885P

Horizontal resolution: Colour mode : More than 400 TV lines (S-VHS)
Specifications Black & White mode: More than 400 TV lines
(S-VHS)
General Signal-to-noise: 45 dB (S-VHS)
Tape format: S-VHS or VHS Audio
Power requirements: AC 220 to 240 V, 50/60 Hz Audio recording mode: 3, 12 and 24-hour mode
Power consumption: 18 W Input: –7.8 dBu, 47 kΩ (phono jack)
Operating temperature: 5°C to 40°C (41°F to 104°F) Output: –7.8 dBu, 600 Ω (phono jack)
Operating humidity: Less than 80% Microphone input: –60 dBu, 600 Ω (ø3.5 mm mini jack)
Dimensions: 420 (W) × 100 (H) × 340 (D) mm
(16 5/8 × 4 × 13 1/2 inches) Others
Mass: Approx. 5.8 kg (12 lb 9 oz) Alarm input: Low level
Tape speed: 23.39 mm/sec (3-hour mode) Alarm output: +5 V, 5.7 kΩ (Low active)
Recording/playback time: 3, 12, 24, 48, 72, 96, 120 and 168 hours Switch output: +5 V, 5.7 kΩ (Low active)
(with an SE/E-180 tape) Tape end output: +5 V, 5.7 kΩ (Low active)
Alarm recording speed: 3, 12-hour mode, NC*1 Warning output: +5 V, 5.7 kΩ (Low active)
Alarm recording duration: 20 s, 1 m, CC*2 Timer output: +12 V, 5.7 kΩ (High active)
Fast forward/rewind time: Approx. 4 minutes (with an SE/E-180 tape) External timer input: Low level
Clock set input: Low level
Video Clock set output: +5 V, 5.7 kΩ (Low active)
Recording system: Rotary four-head helical scanning system Series input: Low level
Luminance signal: FM recording Series output: +5 V, 5.7 kΩ (Low active)
Colour signal: Low-pass band-pass transformation Control terminals: ø3.5 mm mini jack
direct recording Optional RS-232C interface (D-sub 9-pin)
Input: BNC: 1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Output: BNC : 1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω

*1 No change of recording speed

*2 Duration of alarm recording continues for as long as alarm input remains active.
0 dBu = 0.775 Vrms

–262–
6-1. Time lapse video recorders

SVT-1000P
Colour time lapse videocassette recorder
•4 different time lapse recording/playback modes are
available in addition to the standard mode (3 hour time
mode) with a normal 180-minute tape
TIME MODE (h) 3 12 24 48 72
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5

Note: In time lapse modes, it is possible to additionally record three hours

longer than the original modes.

•Adaptive Picture Control (APC) delivers optimum picture

quality to the recording image •A tape recorded in the 3-hour
mode can be played back by any VHS VCR •Audio
recording and playback are possible in 3,12 and 24-hour
modes •Built-in time and date generator allows time and
date information to be displayed along with the Alarm count
and Recording/Playback speed •Various recording modes
such as Auto Repeat Recording, Timer Recording and
Alarm Recording for versatile situations •By using alarm
recall and scan functions, pictures recorded during alarm
mode can be easily checked •Holiday setting function
•Daylight Saving Time setting function •Quick Recording
check function •Field-by-field picture playback capability
•External timer input capability •On-screen display permits
easy-to-follow operation •Auto head cleaning function •Tape
before-end signal output/Tape-end output capability
•Warning signal output capability •Buzzer setting function
•Power-failure protection for up to 30 days •Security lock
function for avoiding accidental operation errors •External
control capability via an optional RS-232C interface •Remote
control capability of basic operational functions through
ø3.5mm mini jack
Supplied accessories: AC power cord
Operating instruction manual
Optional accessories: RS-232C interface board SVT-RS1A
Remote control unit SVT-RM10
TLV parts kit TPK-887P
Audio

SURVEILLANCE
Audio recording mode: 3, 12 and 24-hour mode

PRODUCTS
Specifications
Input: –7.8 dBu, 47 kΩ, unbalanced (phono jack)
General Output: –7.8 dBu, 600 Ω, unbalanced (phono jack)
Power requirements: AC 220 to 240 V, 50/60 Hz Microphone input: –60 dBu, 600 Ω (ø3.5mm mini jack)
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F) Others
Operating humidity: Less than 80% Alarm input: Low level
Dimensions: 420 (W) × 100 (H) × 349 (D) mm Alarm output: +5 V, 5.7 kΩ (Low active)
(165/8 × 4 × 133/4 inches) Switch output: +5 V, 5.7 kΩ (Low active)
Mass: Approx. 5.5 kg (12 lb 2 oz) Tape end output: +5 V, 5.7 kΩ (Low active)
Tape speed: 23.39 mm/sec (3-hour mode) Warning output: +5 V, 5.7 kΩ (Low active)
Recording/playback time: 3, 12, 24, 48 and 72 hours (with an E-180 tape) External timer input: Low level
Alarm recording speed: 3, 12-hour mode, NC*1 Control terminals: ø3.5 mm mini jack
Alarm recording duration: 20 s, 1 m, CC*2 Optional RS-232C interface (D-sub 9-pin)
Fast forward/rewind time: Approx. 4 minutes (with an E-180 tape)

Video
Recording system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
Input: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
(BNC type)
Output: 1.0 Vp-p, 75 Ω, unbalanced, sync negative
(BNC type)
Horizontal resolution: Colour mode: More than 240 TV lines
Black & White mode: More than 320 TV lines
Signal-to-noise ratio: 43 dB

*1 No change of recording speed

*2 Duration of alarm recording continues for as long as alarm input remains active.

–263–
 6-1. Time lapse video recorders

SVT-124P
Colour Time Lapse Videocassette Recorder
•Two different time lapse recording/playback modes are
available in addition to the standard mode (3-hour time
mode) with a normal 180-minute tape
TIME MODE (h) 3 12 24
INTERVAL (s) 1/50 0.1 0.18

•Compact body with a 240 mm width •Adaptive Picture

Control (APC) delivers optimum picture quality to the
recording image •Audio recording and playback are possible
in 3, 12 and 24-hour modes •Built-in time and date generator
allows time and date information to be displayed along with
the Alarm count and Recording/Playback speed •Various
recording modes such as Auto Repeat Recording, Timer
Recording and Alarm Recording for versatile situations
•Holiday setting function •Daylight Saving Time setting
function •Camera switcher interface •Quick recording check
function •By using alarm recall and scan functions, pictures
recorded during alarm mode can be easily checked •Field-
by-field picture playback capability •External timer input
capability •Automatic clock adjusting is possible when
several VTRs are connected •On-screen display permits
easy-to-follow operation •Auto head cleaning function •Tape
before-end signal output / Tape-end output capability
•Warning signal output capability •Buzzer setting function
•Power-failure protection for up to 30 days •Security lock
function for avoiding accidental operation errors •Clog
detection function •Remote control capability of basic
operational functions through ø3.5 mm mini jack (optional
Remote Control Unit SVT-RM10)

Supplied Accessories: AC power cord (1)

Operation manual (1)
Optional Accessory: Remote control unit SVT-RM10
TLV parts kit TPK-953P
Others
Specifications Alarm input: Low level
General Alarm output: +5 V, 5.7 kΩ (Low active)
SURVEILLANCE

Tape format: VHS Switch output: +5 V, 5.7 kΩ (Low active)

PRODUCTS

Power requirements: AC 220 to 240 V, 50/60 Hz Tape end output: +5 V, 5.7 kΩ (Low active)
Power consumption: 18 W Warning output: +5 V, 5.7 kΩ (Low active)
Operating temperature: 5°C to 40°C (41°F to 104°F) External timer input: Low level
Operating humidity: Less than 80% Remote/Tally: Stereo mini pin
Dimensions: 240 (W) × 96.5 (H) × 333 (D) mm AC input: 3-pin inlet
(9 1/2 × 3 7/8 × 13 1/8 inches)
Mass: Approx. 3.8 kg (8 lb 6 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time: 3, 12, 24 hours
(with an E-180 tape)
Alarm recording speed: 3-hour mode
Alarm recording duration: 20 s, 40 s, 1 m, 2 m, 3 m, 5 m, CC*1, TRIG
Fast forward/rewind time: Approx. 2.5 minutes (with an E-180 tape)

Video
Recording system: Rotary four-head helical scanning system
Input: BNC : 1.0 Vp-p, 75 Ω, unbalanced
Output: BNC : 1.0 Vp-p, 75 Ω, unbalanced
Horizontal resolution: Colour mode : More than 240 TV lines
Black & White mode : More than 320 TV lines
Signal-to-noise: 43 dB

Audio
Audio recording system: Monaural
Audio recording mode: 3, 12 and 24-hour mode
Input: –7.8 dBu, 47 kΩ (phono jack)
Output: –7.8 dBu, 600 Ω (phono jack)
Microphone input: –60 dBu, 600 Ω (ø3.5 mm mini jack)
Distortion: Less than 4%
Audio signal-to-noise: 42 dB

*1 Duration of alarm recording continues for as long as alarm input remains active.
0 dBu = 0.775 Vrms

–264–
6-2. Time lapse video recorders accesories

SVT-RM10
Remote Control Unit
•Designed to remotely control all SVT VCRs
•Provides wired remote control operation for
REC/PLAY/STOP/REW/FF/REVPLAY/
PAUSE •MENU button and REC/PLAY
SPEED button are also available •Length of
cable: 2.4 m

SVT-RS1A
RS-232C Interface Board
•When installed in the SVT-L230P,
SVT-5050P, SVT-S3050P and SVT-1000P,
this board allows these recorders to be
remotely controlled from computers
•Connectable with common RS-232C cable
(male type) •REC CHECK function is
available

SURVEILLANCE
PRODUCTS

–265–
 7-1. Digital surveillance recorder

HSR-1P
Digital Surveillance Recorder
•Hybrid configuration of HDD and DV tape drive •Four
alternative quality modes: Super, High ,Middle and Low
modes •Excellent picture quality provided by super mode
with a horizontal resolution of more than 500 TV lines •Large
storage capacity(more than 60 GB) and long recording time
by using DV cassette tape(270-minute tape) as a storage
medium •High refresh rate for recording of each camera
•High reliability on tape transport mechanism and heads
offered by the hybrid configuration of HDD and DV tape
drive. •Compact body which matches that of a 14-inch
monitor •Compact storage medium which requires less
space •Up to 16 camera inputs provided by installing optional
HSRA-11 •Built-in triplex multiplexing capability which allows
simultaneous playback, recording and monitoring of up to 16
camera inputs. •A variety of monitoring patterns •Two
monitoring outputs for simultaneous playback on the first
monitor and monitoring on the second monitor •Five preset
recording modes to be flexibly combined with picture quality
mode, tape length, recording time, number of camera inputs
and the recording cycle of each camera. •Flexible camera
assignment •RS-232C interface for PC control •Freely
configurable 37-pin parallel port •Flexibility in alarm mode
•Continuous recording function without breaks even while
changing or rewinding the tape •Sophisticated security
functions •Water mark •Intelligent search functions: time/date
search, alarm search, specific user data search and
noiseless picture search •Pre Alarm recording capability for
event recording •Power On recording capability •Frame
recording in hyper mode
Supplied Accessories: AC power cord (1)
Operation manual (1)
Optional Accessories: HSRA-11 (Input Board)
SVRM-100A (Remote Control Unit)

Specifications
General Built-in Multiplexer
SURVEILLANCE

Mass: 10 kg (22 lb 1 oz) Input: 4 inputs (up to 16 inputs with optional boards)
PRODUCTS

Dimensions: 355 (W) × 125 (H) × 410 (D) mm Output: 2 outputs

(14 × 5 × 16 1/4 inches) Split screen display: 9 patterns
Power requirements: AC 220 V ~ 240 V, 50/60 Hz Connectors
Power consumption: 80 W (without options) Parallel input/output: D-SUB 37-pin (1)
115 W (with full options) Input: 24 terminals to be freely assigned
Operating temperature: 5°C ~ 40 °C (41 °F ~ 104°F) (Alarm, Clock set, Series rec, Alarm cancel, etc.)
Operating humidity: Less than 80 % Output: 8 terminals to be freely assigned
Usable tape: DV*1 or DVCAM*2 cassette tape (Auto off, Tape end, Series rec, Rec tally, ect.)
(standard size, mini size) Power output: +12 V (max 100 mA)
HDD capacity: More than 4.3 GB Control S: Stereo mini (1)
System
Video signal: CCIR standard, PAL colour *1 The recorded tape by the HSR-1P cannot be played back on DV equipment.
*2 A DVCAM 184-minute tape can be used with the HSR-1P. It has the same storage
Recording system: Rotary two-head helical scanning system
capacity as that of a DV 270-minute tape.
Digital components
Quantization: 8-bit
Sampling frequency: 13.5 MHz (4:2:0 components)
Recording/Playback time:
Maximum 9999 hours (Approx. 400 days)
Fast forward/Rewind time:
Less than 3 min. (with a DV270 tape)
Video
Input: VBS, VS (BNC type):
1.0 Vp-p, 75 Ω, unbalanced
Output: VBS (BNC type):
1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO (DIN 4-pin):
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω, at burst level
Quality mode: SUPER, HIGH, MIDDLE and LOW mode (selectable)
(Field-by-field recording)
HYPER mode
(Frame-by-frame recording with a trigger signal)
Horizontal resolution: More than 500 TV lines (HYPER and SUPER mode)
Signal-to-noise ratio: More than 48 dB

–266–
7-2. Digital surveillance recorder accessories
HSRA-11
Input Board for HSR-1P
When installed in the HSR-1P, this board enables signals from
camera to be input to the unit.

Connector Input: BNC × 4

SVRM-100A
Remote Control Unit for the HSR-1P
•Provides wired remote control operation for STOP/REC/PAUSE/

SURVEILLANCE
REW/PLAY/FFWD •JOG/SHUTTLE operation

PRODUCTS
Specifications
Power requirements: DC 5 V (supplied from the HSR-1P)
Power consumption: 40 mW
Remote control: Stereo mini plug
Control signal: Control S
Dimensions: 90 (W) × 39 (H) × 182 (D) mm
(3 5⁄8 × 1 9⁄16 × 7 1⁄4 inches)
Mass: 250 g (8.8 lb)

–267–
 8. Monitoring Codecs

PMS-500P/400P
Monitoring codecs
•PMS-500P and PMS-400P Comparison
Video Voice Control Data
Send Receive Send Receive Send Receive
PMS-500P YES YES YES YES YES YES
PMS-400P YES NO YES YES YES YES

(Both PMS-500P and PMS-400P)

•Transmission of smooth and clear video at a maximum of 15
frames per second via an ISDN line •Selectable video mode
(Fast/Normal/Fine) in monitoring •Accepts 8 camera inputs
which are selectable from a control centre or local terminals
•I/O port to control camera pan/tilt and zoom lens •Relay
output port to control external devices (i.e. door, light)
•Transmission and receiving capability of audio which allows
conversation between two sites •When an alarm signal is
input to a terminal, it automatically activates the control
centre to switch the monitor to watch that terminal •Easy
connection by connecting to an ISDN modular jack
•Compatible with a wide range of cameras, monitors, and
TLV equipment •Password protection •RS-232C serial
interface for PC control •Remote diagnostics
Supplied Accessories: AC power cord (1) Network connectors
Operation manual (1) ISDN BRI: RJ45
Tablet operation seals (1) V35 with RS-366: 36-pin half-pitch connector (2)
Specifications Computer control port
Video Interface: RS-232C
Coding: H.261 (ITU-T recommendation) Baud rate: 1200/2400/4800/9600/19200/38400 bps
Operating bandwidth: Selection of 12 bandwidths ranging from 56 kbps to Tablet input
384 kbps Interface: RS-232C
Frame rate: Max. 15 frames per second Baud rate: 9600 bps
Picture elements: CIF: Luminance (Y): 352 pixels × 288 lines
Colour difference (B-Y/R-Y): User data I/O
176 pixels × 144 lines I/O parallel
Colour system: PAL (mutually connectable with NTSC) Alarm input: D-sub 9-pin
P in P: PMS-500P only TTL input, pull-up resistance 10 kΩ
Input Relay control: D-sub 9-pin
Video In/Ext. Video In: 1.0 Vp-p, 75 Ω, sync negative (BNC type) Output mode : Open collector (40 V, 40 mA)
Video Out/Through Out: 1.0 Vp-p, 75 Ω, sync negative (BNC type) Input mode : TTL input, pull-up
Monitor Out: 1.0 Vp-p, 75 Ω, sync negative (BNC type) resistance 10 kΩ
SURVEILLANCE

Camera control: Output mode : Open collector (40 V, 40 mA)

PRODUCTS

Input connectors
Video In: PMS-500P: 8 Input mode : TTL input, pull-up
PMS-400P: 8 resistance 10 kΩ
Ext. Video In: PMS-500P: 1 Remote control unit: Mini jack, SIRCS format
PMS-400P: 1 I/O serial: D-sub 9-pin
Video Out: PMS-500P: 1 Baud rate: 1200/2400/4800/9600/19200/38400 bps
PMS-400P: – Interface: RS-232C or RS-422 (1)
Monitor Out: PMS-500P: 1 RS-232C or RS-485 (1)
PMS-400P: 1 RS-232C (1)
Audio RS-232C: PMS-500P: 3 (switchable with RS-422/485)
Coding: G.728 (ITU-T recommendation) PMS-400P: 3 (switchable with RS-422/485)
Transfer rate: 16 kbps Alarm input: PMS-500P: 8
Bandwidth: 3.4 kHz PMS-400P: 8
Input Relay output: PMS-500P: 8
Mic In: –60 dBu/600 Ω, balanced (4-pin round connector) PMS-400P: 8
Headphone Mic In: –60 dBu/4.7 kΩ, unbalanced (minijack) Camera P I/O: PMS-500P: 12
Line Out: Variable, 4.7 kΩ (phono) PMS-400P: 12
Headphone SP Out: Variable, 72 Ω (minijack) SIRCS input: PMS-500P: 1
Input connectors PMS-400P: 1
Mic In: PMS-500P: 1 RS-485: PMS-500P: (1)
PMS-400P: 1 PMS-400P: (1)
Headphone Mic In: PMS-500P: 1 Operation keys: PMS-500P: Main unit keys, Remote control (option),
PMS-400P: 1 Tablet (option)
Line Out: PMS-500P: 1 PMS-400P: Main unit keys, Remote control (option),
PMS-400P: 1 Tablet (option)
Headphone SP Out: PMS-500P: 1 Menu display memory
PMS-400P: 1 Screen size: Max. 24 characters × 12 lines (288 characters)
Character font: 24 × 32 pixels
Control procedure coding standards
H.242 System for Establishing Communication General
H.320 Overall System Power requirements: AC 220 to 240 V, 50/60 Hz
H.230 Control and Indication Signal Power consumption: 0.35 A
H.221 Framing and Signaling Structure Operating temperature: 0°C to 40°C
Operating humidity: 20% to 80% (no condensation)
Communications interface Storage temperature: –20°C to 55°C
Network Storage humidity: 20% to 75% (no condensation)
Multiplexing: Video, audio, data Mass: 7.0 kg
Transmission rate: ISDN interface, 1B/2B Dimensions: 424 (W) × 88 (H) × 356 (D) mm
V35 with RS-366 (56 k - 384 k) (16 3/4 × 3 1/2 × 14 1/8 inches)

–268–
9-1. Automotive monochrome video camera

SSC-534AM
CCD monochrome video camera
•Compact, lightweight and rugged construction •1/2-inch IT
Hyper HAD CCD provides extremely high sensitivity with a
minimum illumination of 0.3 lx •Wide angle view—100
degrees horizontally, 80 degrees vertically •Built-in electret
condenser microphone •Only single 4-pin Multiple Cable
required between the SSC-534AM and the
SSM-504AM/724AMR to transmit video and audio signals,
together with DC power

Supplied accessories: Camera bracket

Rubber cap
Adhesive
Self-fusing tapes (2)
3mm Allen key
4mm washers (4)
Angle adjusting screws (4)
5mm hexagon head bolts (5)
5mm washers (5)
Rubber nuts (5)
Operating instruction manual
Optional accessories: Camera cable VK-110A/120A (10/20 m)
Water-resistant extension cable
VK-305 (5 m)
Water-resistant camera cable
VK-310A/320A (10/20 m)

Specifications
Image device: 1/2-inch Interline Transfer Hyper HAD CCD
Picture elements: 500(H) × 582(V)
Sensing area: 6.3 mm × 4.7 mm
Lens: f=3.0 mm, F1.6 with auto-iris
Video signal system: CCIR standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal
Horizontal resolution: 380 TV lines
Minimum illumination: 0.3 lx
Signal-to-noise ratio: 50 dB (AGC OFF)
Video/audio output: 4-pin Multi-connector

1 1 DC input
4 2
2 Video output: 1.0 Vp-p, 75 Ω, sync negative
3 Ground

SURVEILLANCE
3 4 Audio output: -5 dBu (436 mVrms), less than

PRODUCTS
10 kΩ, unbalanced

Power requirements: DC 12 V
Power consumption: 1.2 W (at DC 12 V)
Operating temperatures: -20 to 70°C (-4 to 158°F)
Storage temperatures: -30 to 85°C (-22 to 185°F)
Mass: 550 g (1 lb 3 oz)

Dimensions

Approx. 5 (7⁄32)
105.6 (41⁄4) 76.5 (31⁄8)
94 (33⁄4)
55 (21⁄4)

48 (115⁄16)
20.5 (13⁄16)

10 (13⁄32)
21.5 (7⁄8) 46 (113⁄16)
Hole 6.5 (9⁄32) dia.
46 (113⁄16)
27 (11⁄8)

Unit: mm (inch)
66 (25⁄8)

–269–
 9-2. Automotive monochrome video monitors

SSM-504AM/724AMR
5-inch/7-inch monochrome monitor
•Offers bright, clear and high-contrast pictures •Compact,
lightweight and rugged construction •Built-in speaker
•Day/Night switch adjusts picture brightness for normal or
low-light conditions •Automatic back-up operation •Only a
single 4-pin Multiple Cable required between the
SSC-534AM and the SSM-504AM/724AMR to transmit
video and audio signals, together with DC power

Exclusive features for SSM-724AMR

•Semi-flat square/non-glare CRT •Audio output connection
for an optional external speaker •Dual camera inputs SSM-724AMR
•Alternative power supply mode (DC 12/24V)
SSM-504AM
Supplied accessories: Mounting bracket
Screws (4)
Bolts (4)
Washers (12)
Spring washers (8)
Nuts (4)
Power supply cable
Bracket holder
Operating instruction manual
Montor scale (SSM-724AMR only)
Optional accessory: Monitor Hood WU-500AM (for SSM-504AM)
Monitor Hood WU-700AM (for SSM-724AMR)

Specifications
Video signal system: CCIR standard
Picture tube: 5-inch/7-inch B/W measured diagonally 90 degree
deflection SSM-724AMR SSM-504AM
Speaker: ø50mm (2-inch) Impedance 8Ω,
SSM-504AM: 0.3W output (max.),
SSM-724AMR: 0.5W OUTPUT (max.)
Video/audio input: 4-pin Multi-connector

1 1 12V DC output
2 Video input: 1.0Vp-p, 75Ω, sync negative
4 2
3 Ground
3 4 Audio input: -5dBu (436mVrms) more than 30kΩ,
unbalanced
Output: External speaker jack (mini jack)
SURVEILLANCE

(SSM-724AMR only), impedance 8Ω

PRODUCTS

Power requirements: SSM-504AM: DC 12V

SSM-724AMR: DC 12V or 24V
Power consumption: SSM-504AM: 8W
SSM-724AMR: 23W
Operating temperature: -15 to 60°C (5 to 140°F)
Storage temperature: -25 to 80°C (-13 to 185°F)
Mass: SSM-504AM: Approx. 2.5kg (5 lb 8 oz)
SSM-724AMR: Approx. 3.2kg (7 lb)

Dimensions
SSM-504AM SSM-724MR
138 (51⁄2)
50 (2) 40 (15⁄8) 234 (91⁄4)
136 (53⁄8) 205 (81⁄8)
2-MS 203 (8) 56 (21⁄4) 73.5 (3)
8 (11⁄32)
130 (51⁄8)

25°
174 (67⁄8)
151 (6)
152 (6)
78 (31⁄8)

5°
75.5 (3)
19 (3⁄4)

25 (1)
56 (21⁄4)

23 (9⁄32)

165 (61⁄2)
167.8 (65⁄8) 10 (13⁄32) 120 (43⁄4)
100 (4)
50 (2) 53 (21⁄8)
40 (15⁄8) 50 (2)

235 (93⁄8)

220 (83⁄4)
73.5 (3)

2
ç1
6.5 15 ⁄32) ¶ 7 (9⁄32) Hole 6.5 ×14
2ç
(9 ⁄3 (9⁄32 × 9⁄16)
Hole φ7 (9⁄32)
Unit: mm (inch)

–270–
SECTION 8 VIDEOCONFERENCING SYSTEM
1. Videoconferencing system
PCS-5100P..........................................................272
PCS-1500P..........................................................274
PCB-500P............................................................275

2. Videoconferencing system accessories ..............276

VIDEOCONFERENCING
SYSTEM

–271–
 1. Videoconferencing system

PCS-5100P Specifications
Communication Protocols
TriniCom 5100 Plus Rollabout package H. 221 (Framing and Signaling Structure)
•Designed for middle to small group meeting (2 to 6 persons H. 230 (Control and Indication Signals)
H. 242 (System for Establishing Communication)
per location) •Complies with the ITU-T H.261/H.263
H. 243 (The Basic MCU Procedure for Communication)
standard for Video Coding, and the G.722/711/728 for Audio H. 320 (Overall System)
Coding •Either ISDN BRI, a switched line, or a dedicated H. 281 (Far-end Camera Control)
digital network (for 56 to 384kbps) can be used for ISO 13871 BONDING, Mode 1
communication interface •Enhanced video quality •Smooth Motion Video
Operating bandwidth: 56 kbps (64 kbps) to 384 kbps in 56 k or 64 kbps
motion video achieved by the frame rate of 30fps •4-site increments
multipoint capability for holding videoconferences involving Coding: H. 261 (ITU-T Standard)
up to four locations •Drop call capability enables the H. 263 (ITU-T Standard)
(56 to 128 kbps with H. 263)
participants to leave the meeting at any time •Wireless Picture elements: CIF 352 pixel 288 lines
remote commander and on-screen menu icons assure easy QCIF 176 pixel 144 lines
operation •High-resolution 1/3-inch CCD camera provides Video signal system PAL
excellent picture reproduction •Auto-tracking camera with (As complied with H. 261/H. 263 standard,
PCS-5100 can communicate directly with PCS-5100
pan/tilt/zoom capability to detect motion and follow an (NTSC system) and vice versa.)
individual speaker •Supports H.281 Far End Camera Control Audio
standard enabling control of the camera of any vendor’s Bandwidth and coding: G.722 7.0 kHz at 48 k or 56 kbps
G.711 3.4 kHz at 56 k or 64 kbps
CODEC (CODEC supporting H.281) •Rollabout processor G.728 3.4 kHz at 16 kbps
combines an ITU-T standard video/audio CODEC, system Cable length: 8 m (From Rollabout Processor to External
controller, communication network interface and echo Microphone Kit)
Camera
canceller all into one unit •Supports the industry standard
Camera: 1/3” CCD
PCMCIA Type 2 ATA Card format allowing transfer of JPEG Preset: up to 6 position (Pan/Tilt/Zoom)
images between the Trinicom and the PC •A second monitor Picture elements: 752 pixels × 582 lines
can be added to display documents and graphics with the Focal length: 5.4~64.8 mm
Focus: Auto/Manual switchable
optional PCS-G510P Dual Monitor Board •High-resolution Iris: Auto
monochrome documents and full-colour still video pictures Zoom ratio: 12 ×
can be transmitted and displayed •With Automatic 4 x CIF Output signal: S-Video (1), Composite (1)
Pan control: ±100°, Motor-driven
Image Transmissions the presenter is able to concentrate on Tilt control: ±25°, Motor-driven
their presentation as this enables 4 x CIF images to be sent Resolution: More than 450 TV lines
every few seconds until the presenter stops the transmission S/N ratio: 45 dB
(When connected at 384 kbps) •The optional PCS-T500 Far-end control: Zoom Tele/Wide
Focus: Auto/Manual (far, near)
Drawing Tablet for pointing or drawing on a document or still Pan: Right/Left
video •Automatic Lip Sync on/off function •Automatic/manual Tilt: Up/Down
dialing function Others: Auto Tracking, Auto Zooming
Back Light Shooting, Brightness Control
Graphics
Basic system configuration Resolution: 704 pixels × 576 lines
•PCS-5100P Rollabout Package - Camera unit, Rollabout Input signal: S-Video (2), Composite (1) With
processor, External Microphone Kit, Remote commander PCS-G510P, RGB(1) is added.
Compression method: JPEG (Joint Photograph Expert Group),
Supplied accessories: S-video cable (1 m) H.261 Annex D (4 × CIF)
Microphone (3 m) Transmitting time: Approx.10 s at line rate 112 k to 384 kbps
Microphone (8 m × 2) Storage Capacity: Max. 30 pages (Color) in total for both graphics and
Audio connecting cable (1 m) document
Connecting cable (1 m) Document
VIDEOCONFERENCING

Camera unit cable (8 m) Resolution (Processing): 200 dpi (8 dots/mm) (1728 x 2376 in A4 paper)
704 pixels × 576 lines with 16 grey scale
SYSTEM

IR repeater Resolution (Display):

ISDN cable (3 m) Input signal: SCSI interfaced to Document Scanner (Scan Jet 4C)
AC power cord (for Rollabout processor, 2.5 m) Paper size: A4
Operation manual Output signal: Centronics interfaced to Laser-beam Printer
Optional accessories: PCS-F500 Cabinet (for 29 inch monitor) (Recommended: Laser Jet 5L, Laser Jet 6L,
PCS-F510 Cabinet (for 34 inch monitor) Laser Jet 4000, Desk Jet 895Cxi)
PCS-G510P Dual monitor board Printing time: approx. 1 min. /A4 Black and White with 16 grey
PCS-R500 Remote commander (For additional scale
purchase) Display scanning: 15.625 kHz (black-and-white with 16 grey-scale)
PCS-R510 Key commander Compression method: MMR (Modified Modified READ)
PCS-T500 Drawing tablet Transmitting time: Approx. 5 sec at line rate 112 k to 384 kbps
PCS-I500 V.35 Board Scanning time: Approx. 8 sec at A4 paper
PCS-I510 X.21 Board Manipulations: Rotation 90° step
PCS-I520 RS-449 Board Size × 1, × 2, × 4
PCS-MC10 Memory card Scroll Vertical up and down
PCS-K21 Printer cable Horizontal right and left
PCS-K32 V.35 Cable Storage capacity: Max. 30 pages(Colour) in total for both document
PCS-K40 RS-449 Cable and graphics
PCS-K60 S-video Cable Picture in Picture
PCS-K70 X.21 Cable Sub screen size: 1/9
VID-P110 Video presentation stand Position: One of four corners
VID-P50 Video presentation stand Motion video mode: (Main) Motion Video of remote site
(Sub) Motion Video of local site
Document mode: (Main) Document
(Sub) Motion Video of remote site
Graphics mode: (Main) Graphics
(Sub) Motion Video of remote site

–272–
1. Videoconferencing system
Pointing and Drawing
Input device: RS-232C interfaced Drawing Tablet (PCS-T500)
Electromagnetic Tablet and Pen system
Pointer: Finger Mark
Line thickness: 3 size
Eraser size: 1 size plus All
Colour: White/Red/Green for Graphics
Black/White for Document
Transmission
Multiplexing: Video, Audio, Data
Frame format: ITU-T H.221
Interface: ISDN (BRI) × 3,
X.21 × 2*
V.35 × 2 with RS-366*
RS-449x1*
I-Mux*
Rate: ISDN 56/64 kbps to 384 kbps in
56/64 kbps increments
V.35* 56/64 kbps to 384 kbps
in 56/64 kbps increments
Dual V.35* 56 kbps × 2, 64 kbps × 2
RS-449* 56/64 k~384 kbps in 56/64 kbps
increments
X.21* 56/64 k~384 kbps in 56/64 kbps
increments
Dual X.21* 56 kbps × 2, 64 kbps × 2
I-Mux* 168 k~384 kbps
Data Port
RS-232C: Aux Control Port (1), 9.6kbps, /Stop bit 2/Non
parity/Data bit 8
User Data Port (1), 9.6kbps/38.4 kbps, /Stop bit
1/Non parity/Data bit 8
Lip Synchronization
System Automatic
Manual ON/OFF
Echo Cancellation
Bandwidth: 7 kHz

Diagnostics
Local operation: Remote Commander or Data Terminal
Remote operation: Data terminal via Modem through analogue
telephone network
Rollabout via ISDN or digital network
Remote Commander * The above photograph is an example of the TriniCom 5100 Plus
Signal format: Infrared SIRCS system, including the PCS-5100P.
Key: Direction Pad and Exec. Key
Power On and Mic Mute
Power: AA/LR6/AM3 (N) Alkaline52 battery
General
Operating temperature 5°C to 35°C (41°F to 94°F)
Operating humidity 20% to 80%
Storage temperature –20°C to 60°C (-4°F to 140°F)
Storage humidity 20% to 80%
Power requirement AC 220 to 240V, 50/60Hz
Power consumption 0.5A
Dimensions:
190 (W) × 340 (H) × 310 (D) mm

VIDEOCONFERENCING
Rollabout Processor:
(71⁄2 × 131⁄2 × 121⁄4 inches)

SYSTEM
External Microphone Kit: 120 (W) × 32.5 (H) × 113 (D) mm
(43⁄4 × 15⁄16 × 41⁄2 inches)
Camera Unit: 142 (W) × 109 (H) × 164 (D) mm
(55⁄8 × 43⁄8 × 61⁄2 inches)
Remote Commander: 42 (W) × 30 (H) × 182 (D) mm
(111⁄16 × 13⁄16 × 71⁄4 inches)
Mass:
Rollabout Processor: 9.0 kg (19 lb 13 oz)
External Microphone Kit: 0.5 kg (1 lb 2 oz)
Camera Unit: 1.2 kg (2 lb 10 oz)
Remote Commander: 0.13 kg (4.6 oz)
NOTE: *: An optional board is required.

–273–
 1. Videoconferencing system

PCS-1500P
Compact Conference Package
•Compact, complete set-top box-type videoconferencing
system •Easy to use and easy to install (Plug and Play)
•Supports a bandwidth of up to 128 kbps as a standard. Can
be upgraded to 384 kbps for high quality video (H. 263 /
H. 261) and enable four-site multipoint operation •Continuous
4 x CIF image transmission as a standard. Allows presenter
to concentrate on the presentation •With the optional
Document Stand PCS-DS150P, PC screens can be sent via
infrared signals to the PCS-1500P •Audio conference
participation possible via ordinary telephone •Supports
international standards: ISDN (H. 320), LAN/WAN (H.323)*
•Detachable pan, tilt, zoom camera with auto tracking
* with optional LAN Board PCS-I152

PCS-1500P package configuration:

Compact Processor with Camera and Microphone,
Remote Commander

Supplied Accessories: S-video cable (1.3 m) (1)

IR Repeater (1)
ISDN cable (5 m) (1)
Audio cable (Pin) (1)
AC Adaptor (1.5 m) (1)
AC Power Code (1)
Operation Manual (3)

Optional accessories: PCS-DS150P Document Stand

PCS-I150 2BRI Board
PCS-I151 V.35 Board
PCS-I152 LAN Board
PCS-UC150 Upgrade Kit for H. 320 MCU
PCS-A300 Microphone Transmission
PCS-K32 V. 35 Cable Multiplexing: Video, Audio, Data
Frame format: ITU-T H. 221 (H.320), ITU-T H.225 (H.323)
Specifications Interface: ISDN (BRI) (1)
Motion video ISDN (BRI) (3) - option
Operating bandwidth: V.35 with RS-366 - option
BRI: 56 k/64 k to 128 kbps in 56 k or 64 kbps LAN 10BASE-T - option
BRI: 56 k/64 k to 384 kbps in 56 k or 64 kbps (option) Rate: ISDN (2B): 56/64 k to 128 kbps in 56/64 kbps
V.35: Up to 384 kbps (option) increments
LAN: 384 kbps Equivalent (option) ISDN (6B): 56/64 k to 384 kbps in 56/64 kbps
Coding: H.261, H.263 (ITU-T Standard) increments
Picture elements: CIF: 352 pixels × 288 lines V.35: 56/64 k to 384 kbps in 56/64 kbps increments
QCIF: 176 pixels × 144 lines LAN: Auto Rate Adoption up to 384 kbps equivalent
Video signal system: PAL
T.120 Port
Audio RS-232C (1), 9.6 / 115.2 kbps
Bandwidth and coding:
G.711: 3.4 kHz at 56/64 Kb/s Lip synchronization
VIDEOCONFERENCING

G.722: 7.0 kHz at 48/56 Kb/s Manual ON/OFF

SYSTEM

G.728: 3.4 kHz at 16 Kb/s

G.723.1: 3.4 kHz at 6.4 kb/s (H.323 only) Echo Cancellation
Camera 7 kHz, Ext echo canceller is applicable
Camera: 1/3” CCD
Presets: up to 6 positions Diagnostics
Picture elements: 752 pixels x 582 lines Local operation: Remote commander or data terminal (PC)
Focal length: 5.4 to 64.8 mm Remote operation: PCS-1500P for set up status check & correction
Focus: Auto / Manual
IRIS: Auto Remote Commander
Zoom ratio: 12X Key: Direction pad and exec. Key
Pan control: +/-100°, motor driven Direct dial / camera select / P in P
Tilt control: +/-25°, motor driven Power On / Off
Resolution: More than 450 TV lines Mic On / Off
Far-end control / H.281: Zoom: Tele / Wide Power: AA / LR6 / AM3 (N) Alkaline (2) battery
Focus: Auto / Manual (far, near) Dimensions: 50 (W) × 35 (H) × 239 (D) mm
Pan: Right / Left (2 × 1 7⁄16 × 9 1⁄2 inches)
Tilt: Up / Down Mass: 180g (6 oz) (including batteries)
Functions: Zoom, focus, pan, tilt, auto tracking, auto zooming,
and back light control General
Operating temperature: 5° to 35° C (41° to 95° F)
Still Picture (H.320 only) Operating humidity: 20 to 80 %
Resolution: 704 pixels x 576 lines Storage temperature: -20° to 60° C (-4° to 140° F)
Compression method: H.261 Annex. D (4CIF) Storage humidity: 20 to 80 %
Transmitting time: Approx. 5 s at line rate 112 k to 128 kbps Power requirement: 100 to 240 V AC, 50/60 Hz
Approx. 1 to 2 s at line rate 366 k to 384 kbps (option) Power Consumption: 1.0 A to 0.6 A
Dimensions: (including camera)
Picture in Picture 258 (W) × 134 (H) × 216 (D) mm
Sub Screen Size: 1/9 (10 1⁄4 × 5 3⁄8 × 8 5⁄8 inches)
Mass 2.5 kg (5 lb 8 oz)

–274–
1. Videoconferencing system

PCB-500P
PC Conference Kit
•Designed for personal data communication on PC
environment •Employs high quality video camera with
excellent picture quality •Complies with the ITU-T H.320
standard for video coding •Complies with H. 323 standards
for communication via LAN •Supports H.281 Far End
Camera Control standard enabling control of the camera of
any vendor’s products (Products supporting H.281) •Video
quality adjustment •Scaleable video windows •Picture-in-
picture and picture-out-picture function •Hands-free
operation via the camera unit’s built-in microphone •A
supplied handset •Lip sync function and echo canceller
•Plug-and-play capability for easy installation •A simple yet
comprehensive icon menu for easy and intuitive operation
•PC phone function •Telephone directory function •Supports
T.120 •Application software sharing on either PC •File
transfer capability •White-board capability •Supports
NetMeeting™ •Internet Access capable •MVIP Option •MCU
Chairman Control
PCB-500P Kit: PC Conference board
Camera unit
Handset
PC Conference software

Supplied accessories: ISDN cable (1.8m x1)

Cable for handset
Operating instructions
Installation manual

Specifications
General
Operating temperature: 0°C to 40°C (32°F to 140°F) Audio
Operating humidity: 20% to 80% (based on room temperature of 25°C Compression: ITU-T standard: G.722 7kHz at 64kbps
(77°F)) G.711 3.4kHz at 56kbps
Preserving temperature: -25°C to 80 °C (-13°F to 176°F) G.728 3.4kHz at 16kbps
Preserving humidity: 10% to 80% (without condensation) Audio input: Telephone handset supplied; built-in microphone in
Power requirement: DC 5V camera unit
Power consumption: 0.6 A Audio output: Line-level output
Dimensions: PC conference board: Sound Blaster card with multimedia speakers
126 (W) × 22 (H) × 176 (D) mm Software-controlled features:
(5 × 7⁄8 ×7 inches) Volume control and mute
Camera unit: Echo canceller
48.6 (W) × 34.9 (H) × 90 (D) mm
(115⁄16 × 13⁄8 × 35⁄8 inches) Camera
Handset: Image sensor: 1/4 inch CCD
45 (W) × 43 (H) × 205 (D) mm Effective pixels: 270 k pixels (effective: 250k)
(113⁄16 × 13⁄4 × 81⁄8 inches) Lens: f = 3.9mm/F1.8

VIDEOCONFERENCING
Mass: PC conference board: 160 g (5.6 oz) White balance: Auto
Min. illumination: 9 lx.

SYSTEM
Camera unit: 110 g (3.0 oz)
Handset: 120 g (4.2 oz) Video out: 8 pin mini DIN, 1.0Vp-p composite
Power requirement: DC 5V, 1.3 W
Transmission
Transfer rate: ISDN 56 k to 128 kbps PC System Requirements
(Max. 384 kbps using optional board*) Platform: IBM PC or equivalent PCI bus and PCI VGA card
LAN up to 1.5 Mbps (requires LAN board) that supports Direct Draw with minimum 2 Mbytes of
memory
Video CPU: Pentium 166 MHz for H. 320 ISDN
Compression: ITU-T standard H.261/H.263 compatible Pentium 200 MHz for H. 323 LAN
Transmitted resolution: FCIF: 352 × 288 pixels up to 15 frames/sec. OS: Windows 95, Windows 98, Windows NT
QCIF: 176 × 144 pixels up to 30 frames/sec. Memory:: 64 MB or more
Video input: Camera-1/Camera-2 inputs switchable via software Hard disk: More than 30 MB
NTSC/PAL auto detection Monitor: SVGA Monitor required
SVGA resolution: All SVGA resolutions with 32 k or 64 k colours
Software-controlled features:
Contrast, hue, brightness and colour control
Video quality adjustment
Scaleable screen size (fixed aspect ratio 4:3)

* IBM is a trademark of IBM Corporation.

* Pentium is a trademark of Intel Corporation.
* Windows and NetMeeting is a registered trademark of the Microsoft Corporation.

–275–
 2. Videoconferencing system accessories
PCS-A510*
Audio unit for PCS-5100P
•Additional audio unit for the PCS-5100P
•Covers a total of five to six attendants in a
conference

Supplied accessories:
Joint cable (mini DIN 8-pin
↔ mini DIN 8-pin, 3 m)

Bandwidth: 7.0 kHz

Power: Supplied from the Rollabout
processor (+12 V)
Mass: 1.0 kg (2 lb 3 oz)
Dimensions: 276 (W) × 83 (H) × 185 (D)mm
(107⁄8 × 33⁄8 × 73⁄8 inches)

*Can only be use with PCS-5100P supplied with Audio Unit.

For details, please contact your nearest Sony office.

PCS-A520EK*
External Microphone Kit for
PCS-5100P
•Additional microphone kit for the
PCS-5100P •Includes one microphone,
terminal box and eight meters multi cable to
connect between the CODEC and the
terminal •Terminal interfaces up to three
microphones and one drawing tablet.

Supplied accessories:
Microphone (3 m cable)
Cable (for Rollabout Processor)
Operation Manual
Mass: 0.5 kg (1 lb 2 oz)
Dimensions: 120 (W) × 32.5 (H) × 113 (D) mm
(4 3⁄4 × 1 5⁄16 × 4 1⁄2 inches)
*Can only be use with PCS-5100P supplied with Audio Unit.
For details, please contact your nearest Sony office.

PCS-F500
Cabinet for PCS-5100P
•Holds the rollabout processor and supports
virtually any size monitor for PCS-5100P

Mass: 33.0 kg (72 lb 12 oz)

Dimensions: 590 (W) × 760 (H) × 703 (D)mm
(231⁄4 × 30 × 273⁄4 inches)
VIDEOCONFERENCING
SYSTEM

PCS-F510
Cabinet for 34 inch monitor for
PCS-5100P
•Holds the rollabout processor and
a 34 inch monitor for PCS-5100P

Mass: 52.0 kg (114 lb 10 oz)

Dimensions: 800 (W) × 760 (H) × 788 (D) mm
(311⁄2 × 301⁄8 × 311⁄8 inches)

–276–
2. Videoconferencing system accessories
PCS-G510P
Dual monitor board for PCS-5100P
•Adds a second monitor to the PCS-5100P
to display documents and graphics in a
dual-monitor system
•VGA and SVGA input
•Built in down converter for VGA/SVGA
images to be converted to S-video

Supplied accessories:
IR repeater

Mass: 0.3 kg (10 oz)

Dimensions: 135 (W) × 28.5 (H) × 242 (D) mm
(53⁄8 × 11⁄8 × 95⁄8 inches)

PCS-R500
Remote commander for PCS-5100P
•Additional remote commander for
PCS-5100P

Mass: 0.13kg (4.6 oz)

Dimensions: 42 (W) × 30 (H) × 182 (D) mm
(111⁄16 × 13⁄16 × 71⁄4 inches)

PCS-R510
Key Commander for PCS-5100P
•Additional remote key commander for
PCS-5000P

Mass: 0.3 kg (6 oz)

Dimensions: 89 (W) × 197 (H) × 36 (D) mm
(35⁄8 × 77⁄8 × 17⁄16 inches)

VIDEOCONFERENCING
SYSTEM

PCS-T500
Drawing tablet for PCS-5100P
•Allows PCS-5100P users to point or draw
on the document or still video

Supplied accessories:
Tablet cable (2.5 m)
Pen
Pen stand
Operation manual

Mass: 0.95 kg (2 lb 2 oz)

Dimensions:
330 (W) × 13.9 (H) × 243 (D) mm
(13 × 9⁄16 × 95⁄8 inches)

–277–
 2. Videoconferencing system accessories
PCS-I500
V.35 Interface Board for PCS-5100P
•Provides a V.35 line interface

PCS-I510
X.21 Interface Board for PCS-5100P
•Provides an X.21 line interface

PCS-I520
RS-449 Interface Board for
PCS-5100P
•Provides an RS-449 line interface
VIDEOCONFERENCING
SYSTEM

PCS-MC10
Memory Card for PCS-5100P
•Records up to 30 still pictures

–278–
2. Videoconferencing system accessories
PCS-K21
Printer Cable for PCS-5100P
•Connects the Rollabout Processor and a
printer (3 m, 9.8 ft)

PCS-K32
V.35 Conversion Connector Cable
for PCS-5100P and PCS-1500P
•Connects the V.35 connector to the terminal
adapter (1 m, 3.3 ft)

PCS-K40
RS-449 Conversion Connector
Cable for PCS-5100P
•Connects the RS-449 Connector to the
terminal adapter in the RS-449 line
interface (1 m, 3.3 ft)

VIDEOCONFERENCING
SYSTEM

PCS-K60
S-video cord for
PCS-5100P
•Cord for connecting video equipment with
S-video connector (5 m)

–279–
 2. Videoconferencing system accessories
PCS-K70
X.21 Conversion Connector Cable
for PCS-5100P
•Connects the X.21 connector (X.21
interface board PCS-I510) to the terminal
adapter (1 m, 3.3 ft)

PCS-DS150P
Document Stand
•Enables easy presentation of material
during videoconference
•Built-in scan converter to input PC screens
(VGA/SVGA/XGA) and send it to the
PCS-1500P via infrared signal
•Three-dimensional objects can be
displayed with the CCD camera

Mass: 2.6 kg (5 lb 11 oz)

Dimensions: 116 (W) × 306 (H) × 247 (D) mm
(including feet)
(4 5⁄8 × 12 1⁄8 × 9 3⁄4 inches)

PCS-I150
BRI Board (2BRI Extension)
•Interface with ISDN (BRI) x 3 (384 kbps)
becomes possible

Mass: 75 g (2 oz)
Dimensions: 70 (W) × 27 (H) × 160 (D) mm
(2 7⁄8 × 1 1⁄8 × 6 3⁄8 inches)
VIDEOCONFERENCING
SYSTEM

PCS-I151
V.35 Board
- Provides a V.35 line interface

Mass: 60 g (2 oz)
Dimensions: 70 (W) × 27 (H) × 166 (D) mm
(2 7⁄8 × 1 1⁄8 × 6 5⁄8 inches)

–280–
2. Videoconferencing system accessories
PCS-I152
LAN Board
•Provides LAN interface
•Follows ITU-T H.320 standard
•Setup data can be up/down loaded via
FTP
•Remote up version is possible via FTP

Mass: 60 g (2 oz)
Dimensions: 70 (W) × 27 (H) × 160 (D) mm
(2 7⁄8 × 1 1⁄8 × 6 3⁄8 inches)

PCS-UC150
Upgrade Kit for H.320 MCU
•4-site multipoint capability
•Enables multipoint conference with other
systems which complies with the ITU-T
H.320 standard

Mass: 30 g (1 oz)
Dimensions: 54 (W) × 4 (H) × 86 (D) mm
(2 1⁄4 × 3⁄16 × 3 1⁄2 inches)

PCS-A300
Microphone Unit for the PCS-1500P
•Microphone unit for the PCS-1500P

Supplied accessory:
Cable (8 m)
Bandwidth: 7.0 kHz
Power: Plug-in power
Mass: 0.2 kg (7.1 oz)
Dimensions : 68 (W) × 15 (H) × 90 (D) mm
(23⁄4 × 19⁄32 × 35⁄8 inches)

VIDEOCONFERENCING
SYSTEM

–281–
 VIDEOCONFERENCING
SYSTEM

–282–
 SECTION 9 AUDIO EQUIPMENT
1. DAT Recorders 4. UHF Synthesized Wireless Microphone System
1-1 DAT Recorders WRT-830A ...........................................................305
PCM-7040 ...........................................................284 WRT-810A ...........................................................305
PCM-R700/R500 .................................................285 WRT-807A ...........................................................305
PCM-R300...........................................................286 WRT-822A ...........................................................305
1-2 DAT Recorders accessories .................................287 WRT-805A ...........................................................306
WRT-808A ...........................................................306
2. CD Players ECM-77BC ..........................................................306
CDP-3100/CDS-3100 ..........................................288 ECM-310BC ........................................................306
CDP-D500 ...........................................................289 ECM-350BC ........................................................307
ECM-44BMP........................................................307
3. Wired Microphones ECM-77BMP........................................................307
3-1 Wired Microphones ECM-121BMP......................................................307
ECM-23F3PR ......................................................291 ECM-122BMP......................................................308
ECM-999PR ........................................................291 ECM-166BMP......................................................308
ECM-672 .............................................................291 ECM-310BMP......................................................308
ECM-670 .............................................................291 WRR-802A ..........................................................310
ECM-MS5 ............................................................292 MB-806A..............................................................310
ECM-510 .............................................................292 WRU-806A ..........................................................310
ECM-530 .............................................................292 WRR-805A...........................................................311
ECM-531 .............................................................292 WRR-810A...........................................................311
ECM-44 Series ....................................................295 WRR-855A...........................................................311
ECM-55 Series ....................................................295 BTA-801...............................................................312
ECM-66 Series ....................................................296 CA-WRR855........................................................312
ECM-77 Series ....................................................296 DC-WL800...........................................................312
ECM-121BMP......................................................297 AN-820A ..............................................................314
ECM-122BMP......................................................297 WD-820A .............................................................314
ECM-166 Series ..................................................297 K-1236 .................................................................314
ECM-310 Series ..................................................298 K-1237 .................................................................314
ECM-350BC ........................................................298 EC-1.5CF.............................................................315
F-115 ...................................................................300 K-1161 .................................................................315
F-710 ...................................................................300 GC-0.7MP............................................................315
F-720 ...................................................................300 SC-M800 .............................................................315
F-730 ...................................................................300 LCS-T805 ............................................................316
F-740 ...................................................................300 WBC Coaxial Cable.............................................316
F-780 ...................................................................301
3-2 Wired Microphones accessories...........................302

EQUIPMENT
AUDIO

–283–
 1-1 DAT Recorders

PCM-7040
2-channel Digital Audio Recorder
•Start ID level sync function •Internal clock for time data
•Eject control via 37-pin parallel remote •Key reassignment
for ease of use •ISR support •Sophisticated electronic editing
capability •SMPTE/EBU time code recording/reading
•Memory start for instant-start playback •Synchronized
operation with video/audio equipment •Time code chase
synchronization •4-head construction for RAW (Read-After-
Write) and RMW (Read-Modify-Write) •Search/location
capability •Variable speed playback in a range of ±12.5%
•Controlled from Sony video editor BVE-9100/2000 •19-inch
rack mountable with optional rack mount rail/adaptor
RMM-30/31 (The RMM-30/31 requires the rack to be at least
26-inch in depth)
Supplied Accessories: AC power cord (1)
Operation manual (1)
Optional accessories: RM-D7200* Dual Remote Controller
(*Not available in some areas.)
RM-D7100 Remote Controller
RMM-30 19-inch Rack Mount Rail
RMM-31 19-inch Rack Mount Adaptor
ECD-3C/10C Digital Audio Cable
PDP-15C/35C/50C/65C/95C/125C Digital Audio Tape
DT-60RA/90RA/120RA Digital Audio Tape
DT-10CLD Cleaning Tape

Specifications
Tape Format/Performance
Recording System: Rotary-head DAT recording
Tape Speed: 8.15 mm/s General
Recording Time: 124 minutes (with Sony PDP-124) Dimensions: 424 (W) × 132 (H) × 360 (D) mm
Scanner Rotation Speed: 2000 rpm (standard recording/playback) 16 3⁄4 × 5 1⁄4 × 14 1⁄4 inches
Track Pitch: 13.6 µm Mass: 10 kg (21 lb 1 oz)
Head System: Helical scanning rotary 4-head system Power Requirements: AC 120 V ±10%, 60 Hz, 230 V +6/-10%, 50/60 Hz
Variable Speed Range: ±12.5% (playback) Power Consumption: 38 W at AC 120 V 0.3 A at AC 230 V
FF and REW Time: Max. 60 s (with Sony PDP-124)
* 0 dBu = 0.775 V
Shuttle Speed: x±1/5, x±1/2, x±1, x±3, x±8 or x±16 normal speed
Jog Speed: x±0 to x±1, x±3 normal speed

Digital Audio Signal

Number of Channels: 2 channels
Sampling Frequency: 48 kHz, 44.1 kHz
Quantization: 16-bit linear
Error Correction: Double-encoded Read Solomon Code
Modulation: 8 to 10 modulation
Frequency Response: 20 Hz to 20 kHz ±0.5 dB
S/N Ratio: More than 90 dB
T.H.D.: Less than 0.05% at reference level
Wow and Flutter: Below measurable limit
Crosstalk: Less than -80 dB (20 Hz to 20 kHz)
Emphasis: 50 µs/15 µs, ON/OFF switchable
Phase Difference between Channels:
Within 10° (20 kHz)
Delay Time: Approx. 135 ms (RAW mode)

Inputs/Outputs
Analog Inputs: +4 dBu (+24 dBu max.), 10 k or 600 Ω, balanced,
EQUIPMENT

XLR-3-31 type (x 2)
+4 dBu (+24 dBu max.), less than 50 Ω, balanced,
AUDIO

Analog Outputs:
XLR-3-32 type (x 2)
Digital Inputs: AES/EBU (with transformer), 110 Ω, XLR-3-31 type
Digital Outputs: AES/EBU (with transformer), 20 Ω, XLR-3-32 type
Time Code Inputs: IEC461 (SMPTE/EBU), 0.5 to 10 Vp-p (10 kΩ),
XLR-3-31 type
Time Code Outputs: IEC461 (SMPTE/EBU), 2.4 Vp-p, XLR-3-32 type
Word Sync Inputs: TTL compatible, 75 Ω, unbalanced, BNC type
Word Sync Outputs: TTL compatible, low impedance, unbalanced,
BNC type
Video Sync Inputs: NTSC/PAL/SECAM or 50 Hz 60 Hz square wave,
0.3 to 4 Vp-p, 75Ω, unbalanced, BNC type
Parallel Remote: TTL compatible, D-sub 37-pin, TTL compatible,
DIN 8-pin
Serial Remote: RS-422, D-sub 9-pin
Computer I/F: RS-232C, D-sub 25-pin
Monitor Outputs: -10 dBu, at less than 150 Ω, RCA pin jack (x 2)
Headphone Outputs: -26 dBu at reference level (8 Ω load),
stereo phone jack

–284–
1-1 DAT Recorders

PCM-R700/R500
2-Channel Digital Audio Recorder
•High-reliability 4 D.D. mechanical transport mechanism with
4 direct drive motors for a stable tape run •Equipped with
auto head cleaning for improved sound quality •4-head
construction for confidence monitoring (PCM-R700) •Easy
system operation with Shuttle and Jog dial •Shuttle for easy
fast forward/rewind and half speed search •Jog dial for
convenient AMS/Program Number •Setup menu for
PCM-R700
preference section- set ID6, level sync threshold, date, etc
•SBM recording function achieving an S/N ratio equivalent to
that of a 20-bit system •Built-in DIN 8-pin parallel remote
connector and supplied wireless remote commander
(RM-D757) •R-core transformer for reduced leakage flux
•Independent Channel 1/ Channel 2 recording level volume
controls for eliminating crosstalk •Wide range of audio
interface options
Supplied Accessories: Wireless remote commander RM-D757 (1)
AC power cord (1)
Screws (M5 × 12) (4)
Decorative washers (4) PCM-R500
Operation manual (1)
Optional Accessory: RM-D750 Remote Controller

Specifications
Digital Audio Signal Format
System: Rotary head DAT recording
Tape: Digital audio tape
Modulation: 8 to 10 Modulation
Digital Audio Channel: 2 channels, stereo
Sampling Frequency: 48 kHz, 44.1 kHz, 32 kHz
Quantization: Standard: 16-bit linear
Long-play : 12-bit non-linear PCM-R700
Error Correction: Double-encoded Reed Solomon Code
Drum Rotation: Standard: 2,000 rpm
Long-play: 1,000 rpm

Inputs/Outputs
Analog IN (Balanced) XLR-3, Female
Reference level: +4 dBu to -12 dBu
Analog IN (Unbalanced): RCA Phono, -12 dBu
Analog OUT (Balanced): XLR-3, Male
Reference level: +4 dBu to -12 dBu
Analog OUT (Unbalanced): RCA Phono, -12 dBu
Digital IN (AES/EBU): XLR-3, Female
Digital OUT (AES/EBU): XLR-3, Male PCM-R500
Digital IN (Coaxial): RCA Phono
Digital OUT (Coaxial): RCA Phono

Remote Interface
REMOTE (8-pin): DIN connector (Parallel)
Optional Remote Commander IN:
Mini plug (Serial)
General
Power Requirements: AC 120 V, 60 Hz (U.S.A. and Canada)
AC 220 to 230 V, 50/60 Hz (Europe)
Power Consumption: 34 W
Dimensions: 482 (W) × 145 (H) × 355 (D) mm
EQUIPMENT

(19 × 5 3⁄4 × 13 7⁄8 inches)

AUDIO

Mass: (R500) 7.2 kg (15 lb 14 oz)

(R700) 7.3 kg (16 lb 2 oz)

–285–
 1-1 DAT Recorders

PCM-R300
2-Channel Digital Audio Recorder
•SBM recording function achieving an S/N ratio equivalent to
that of a 20-bit system •Start ID, End ID, Skip ID, control on
the front panel •Setup menu for preference section - set ID6
(SCMS), level sync threshold •Error rate display selectable in
display mode •Coaxial and optical digital interface •A/D and
D/A monitoring modes •Recording and playback in Long play
mode •Supplied rack mount adaptor for rack mounting
Supplied Accessories: Wireless remote commander RM-D757 (1)
AC power cord (1)
Screws (M5 x 12) (4)
Decorative washers (4)
Operation manual (1)
Rack mount adaptors (2)

Specifications
Digital Audio Signal Format
System: Rotary head DAT recording
Tape: Digital audio tape
Modulation: 8 to 10 Modulation
Digital Audio Channel: 2 channels, stereo
Sampling Frequency: 48 kHz, 44.1 kHz, 32 kHz
Quantization: Standard: 16-bit linear
Long-play: 12-bit non-linear
Error Correction: Double-encoded Reed Solomon Code
Drum Rotation: Standard: 2,000 rpm
Long-play: 1,000 rpm

Inputs/Outputs
Analog I/O (Unbalanced): RCA Phono, -12 dBu
Digital I/O: Optical jack
Coaxial (RCA Phono)

General
Power Requirements: AC 120 V, 60 Hz (U.S.A. and Canada)
AC 220 to 230 V, 50/60 Hz (Europe)
Power Consumption: 30 W
Dimensions: 432 (W) × 122 (H) × 325 (D) mm
(17 1⁄8 × 4 7⁄8 × 12 7⁄8 inches)
Mass: 5.0 kg (11 lb)
EQUIPMENT
AUDIO

–286–
1-2 DAT Recorders accessories

RM-D7200*
Dual Remote Controller for PCM-7040
•Provides remote control of two recorder transports
*Not available in some areas.

RM-D7100
Remote Controller
•Provides remote control of recorder transport functions of
PCM-7040 via 37-pin parallel interface

RM-D750
Remote Controller for PCM-R700/R500

EQUIPMENT
AUDIO

–287–
 2 CD Players

CDP-3100/CDS-3100
CD Player System
•Front loading and highly compact CD player •Two units can
be mounted in a 19-inch rack •Fully featured remote control,
including jog dial for comprehensive control in on air and
production applications •AES/EBU digital and balanced XLR
analog outputs •Variable speed playback in a range of
±12.5% in 0.1% steps
Supplied Accessories: <CDP-3100 CD Player>
AC power cord (1)
Operation manual (1)
<CDS-3100 Remote Controller>
Connecting cord (2 m, 1)
Operation manual (1)
Optional Accessories: DABK-3101 Memory Board
DABK-3102 Interface Board

Specifications (CDP-3100)
Number of Channels: 2 channels (stereo)
Readout System: Non-contact optical system using semiconductor
laser pick-up
Laser: GaAIAs double hetero junction diode with 780 m
wavelength
Rotational Speed: Between approx. 200 rpm (outer circumference)
and 500 rpm (inner circumference)
Error Correction: Sony super strategy cross Interleave Reed
Solomon Code (CIRC)
D/A Conversion: 18-bit 8 times oversampling
Frequency Response: 20 Hz to 20,000 Hz +0.5 dB/-1.0 dB
Harmonic Distortion: Less than 0.01%
Wow and Flutter: Below measurable limit
Signal-to-noise Ratio: More than 92 dB
Crosstalk: Less than -80 dB at 20 kHz
Variable Speed Range: ± 12.5%

Outputs
LINE OUT: Balanced, XLR-3-32 type (x 2), nominal +4 dBu
(600 Ω), maximum +19 dBu (600 Ω)
MONITOR OUT: Unbalanced (x 2), nominal -10 dBu (47 kΩ)
maximum +5 dBu (47 Ω)
DIGITAL OUT: AES/EBU, XLR-3-32 (x 1)
HEADPHONE OUT: Maximum 0 dBu (32 Ω)
Remote Control I/F: DIN 8-pin for fader start control, 10-pin for
CDS-3100
Power Requirements: AC 100, 120, 220 to 230, 240 V, 50/60 Hz
Power Consumption: 35 W
Dimensions: 212 (W) × 118 (H) × 408 (D) mm
(8 1⁄3 × 4 3⁄4 × 16 1⁄8 inches)
Mass: 6.5 kg (14 lb 5 oz)
EQUIPMENT
AUDIO

–288–
2 CD Players

CDP-D500
CD Player
•Jog Shuttle Dial for CD frame accurate cueing •CD TEXT
format compatibility for various CD TEXT information (Disc
title, Track title, etc) to be read out via RS-232C port •Last
cue memory function can be utilized by Cue/stdby button
•Built-in DIN 8-pin remote control connector for fader
start/stop from a mixing console •Built-in Word sync input
with wide lock range (44.1 kHz ±12.5%) •Index cueing
capability •Variable speed playback (±12.5% in 0.1% steps)
•Auto cue playback for rapid start from a point where
modulation is detected (signal detection level is adjustable)
on disc •Adjustable (1 to 9 seconds) Auto fade on the front
panel •Direct track access on the front panel •Built-in digital
outputs conforming to AES/EBU and Unbalanced (IEC-958)
formats •Accommodates both 8 cm (3-inch) and 12 cm (5-
inch) compact discs
Supplied Accessories: Wireless remote commander RM-D500 (1)
AC power cord (1)
Screws (M5 x 12) (4)
Decorative washers (4)

Specifications
Frequency Response: 5 Hz to 20,000 Hz
Signal-to-noise Ratio: More than 100 dB (20,000 Hz LPF IHF-A
Weighted)
Dynamic Range: More than 98 dB
T.H.D.: Less than 0.004% (at 1 kHz, 0 dB 20 kHz LPF)
CH Separation: More than 100 dB (at 1 kHz to 20 kHz LPF)
Analog Output:
XLR-3
Output Impedance: 100 Ω
Max. Output Level: +24 dBu
Load Impedance: 10 kΩ
RCA Phono
Output Impedance: 200 Ω
Max. Output Level: +9 dBu
Load Impedance: 10 kΩ
H.P.(RCA Phone)
Output Impedance: 150 Ω
Max. Output Level: 15 mV
Load Impedance: 32 Ω
Digital Output:
AES/EBU (XLR-3)
Output Impedance: 35 Ω
Output Level: —
Adaptable Load Impedance:
110 Ω
IEC-958 (RCA Phono)
Output Impedance: 75 Ω
Output Level: 0.5 p-p
Adaptable Load Impedance:
75 Ω
Word Sync Input:
Input Impedance: 22 kΩ/75 Ω Switchable (BNC)
Input Level: 2 Vp-p (TTL)
Lock Range: 44.1 kHz+12.5% (38.59 kHz to 49.6 kHz)
Remote Interface: Parallel DIN 8-pin (2 modes)
EQUIPMENT

Serial RS-232C (D-sub 9-pin)

AUDIO

Dimensions: 482 (W) × 145 (H) × 335 (D) mm

(19 × 7 7⁄8 × 14 7⁄8 inches)
Mass: 7.1 kg (15 lb 10 oz)

–289–
 AUDIO
EQUIPMENT

–290–
3-1 Wired Microphones

ECM-23F3PR
Electret Condenser Microphone
•Multi-purpose use •Low-cut filter •AA-size battery operation

Frequency Response Characteristics Directivity Characteristics

Uni-Directional 0°
+20
30° OdB 30°
-5
-5
+10 -10
-10
60° 60°
-15
-15
0°
Response (dB)

0 -20
-20
90°
90° 90°

-10

180° 120° 120°

-20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
400Hz
1KHz
Frequency (Hz)
6KHz

ECM-999PR
MS Stereo Electret Condenser Microphone
•Variable stereo angle (0˚ to 150˚) •Low-cut filter •AA-size
battery operation

Frequency Response Characteristics Directivity Characteristics

Uni-Directional L Channel 0° R Channel
+20
30° OdB 30°
-5
+10 60° -10 60°
-15
Response (dB)

0° -20
0
M 90° 90°

-10
180°

120° 120°
-20
V
150° 150°
180°
20 50 100 200 500 1k 2k 5k 10k 20k 400Hz/1kHz
6KHz
Frequency (Hz) Directional Axis 120°

ECM-672 continuous operation) or external power supply (DC 48 V) •2-

position low-cut filter •Suitable for mounting on Sony
Electret Condenser Microphone cameras and camcorders
•Super-cardioid characteristics, rejecting indirect sound
•2-way powering — internal battery (Approx. 3,000 hours of

Frequency Response Characteristics Directivity Characteristics

Uni-Directional 0°
+20
30° OdB 30°
-5
0°
+10 60° -10 60°
-15
Response (dB)

0 -20
90° 90° 90°

-10 180°

120° 120°
-20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
250Hz
1KHz
Frequency (Hz) 4KHz
EQUIPMENT
AUDIO

ECM-670 mounting on Sony cameras and camcorders •External power

supply (DC 12 V to 48 V)
Electret Condenser Microphone
•Super-cardioid microphone with minimum sensitivity to
ambient noise •Compact and light weight design •Suitable for

Frequency Response Characteristics Directivity Characteristics

Uni-Directional 0°
+20
30° OdB 30°
-5
-5
+10 -10
-10
60° 60°
0°
-15
-15
Response (dB)

0 90° -20
-20
90° 90°

-10

180° 120° 120°

-20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
250Hz
1KHz
Frequency (Hz) 4KHz

–291–
 3-1 Wired Microphones

ECM-MS5 •2-way powering — external power supply or battery

operation with optional DC-MS5
MS Stereo Electret Condenser Microphone
•Compact and light MS (Mid-Side) stereo microphone
•6-position stereo angle selector (0˚, 90˚ to 127˚)

Frequency Response Characteristics Directivity Characteristics

V1 M
Uni-Directional 15° 0° 15°
+10 L Channel 30° OdB 30° R Channel
45° -5 45°
0
0° from L or R Directional Axis
60° -10 60°
ECM-MS5
180° from L or R Directional Axis
-15
75° 75°
Response (dB)

M -20
-10
V 90° 90°

-20
105° 105°

120° 120°
-30
135° 135° DC-MS5
150° 150°
165° 180° 165°
20 50 100 200 500 1k 2k 5k 10k 20k
Openning Angle 127°
Frequency 1KHz
Frequency (Hz)

ECM-510
Electret Condenser Microphone
•Primarily for interview situations •Ultra slim and lightweight
body •2-way powering — internal AA-size battery or external
power supply (DC 12 V to 48 V)
Frequency Response Characteristics Directivity Characteristics
Omni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°

0° -15
Response (dB)

0 -20
180°
90° 90°
90°
-10

120° 120°
-20

150° 150°
180°
20 50 100 200 500 1k 2k 5k 10k 20k 100Hz
1KHz
Frequency (Hz) 8KHz

ECM-530 positioning for precise voice pick-up •2-way powering system

— internal AA-size battery or external power supply (DC 12
Electret Condenser Microphone V to 48 V)
•A compact and high-quality table-top microphone •The
goose-neck and extendable stem allow flexible microphone

Frequency Response Characteristics Directivity Characteristics

Uni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°

0° -15
Response (dB)

0 -20
90° 90° 90°

-10 180°

120° 120°
-20

150° 150°
180°
20 50 100 200 500 1k 2k 5k 10k 20k 100Hz
1KHz
Frequency (Hz)
EQUIPMENT

8KHz
AUDIO

Electret Condenser Microphone •External power supply (DC 12 V to 48 V)

•Directly installed in conference tables and lecterns via an
ECM-531 XLR-3-12C type connector
•Ideally suited for conference and lecture applications
•Flexible goose-neck for microphone positioning
•Equipped with a low-cut switch
Frequency Response Characteristics Directivity Characteristics
Uni-Directional 15° 0° 15°
+20 30° OdB 30°
45° -5 45°
+10 60° -10 60°
-15
0° 75° 75°
Response (dB)

0 -20
90° 90° 90°

-10 M 180°
105° 105°

120° 120°
-20
135° 135°
V 150° 150°
165° 180° 165°
20 50 100 200 500 1k 2k 5k 10k 20k
100Hz
1KHz
Frequency (Hz) 8KHz

–292–
3-1 Wired Microphones
Specifications
ECM-Series

ECM-670 ECM-672 ECM-MS5 ECM-999PR ECM-23F3PR ECM-510 ECM-530 ECM-531

Capsule Type Electret Electret Electret Electret Electre Electret Electre Electret
Condenser Condenser Condenser Condenser Condenser Condenser Condenser Condenser
Frequency 70 to 16,000 Hz 50 to 16,000 Hz 70 to 20,000 Hz 20 to 20,000 Hz 20 to 20,000 Hz 40 to 17,000 Hz 70 to 18,000 Hz 70 to 18,000 Hz
Response
Directivity UNI UNI UNI UNI UNI OMNI UNI UNI
Effective Output -43.0 dBm -42.0 dBm -37.8 dBm (0˚) -51.0 dBm (120˚) -47.0 dBm -50.0 dBm -46.8 dBm -42.8 dBm
Level at 1 kHz, -34.8 dBm (127˚)
(0 dBm=1 mW/1 Pa.)
Sensitivity -44.0 dB ± 3.0 dB -42.0 dB ± 2.0 dB -40.0 dB ± 2.0 dB (0˚) -48.0 dB (120˚) -48.0 dB -50.0 dB ± 2.0 dB -49.0 dB ± 3.0 dB -49.0 dB ± 3.0 dB
(0 dB=1 V/1 Pa., at 1 kHz) -37.0 dB ± 2.0 dB (127˚)
Output Impedance 200 Ω ± 20% 250 Ω ± 20% 150 Ω ± 20% 480 Ω ± 20% 200 Ω ± 20% 250 Ω ± 20% 150 Ω ± 20% 60 Ω ± 20%
at 1 kHz (balanced)
Dynamic Range ≥ 101 dB ≥ 92 dB ≥ 108 dB ≥ 104 dB ≥ 110 dB ≥ 97 dB ≥ 95 dB ≥ 100 dB
Signal-to-noise Ratio ≥ 70 dB ≥ 72 dB ≥ 74 dB (0˚) ≥ 68 dB (120˚) ≥ 70 dB ≥ 65 dB ≥ 63 dB ≥ 64 dB
(A weighted, 1 kHz, 1 Pa..) ≥ 72 dB (127˚)
Inherent Noise ≤ 24 dB SPL ≤ 22 dB SPL ≤ 20 dB SPL (0˚) ≤ 26 dB SPL (120˚) ≤ 24 dB SPL ≤ 29 dB SPL ≤ 31 dB SPL ≤ 30 dB SPL
(0 dB SPL = 2 × 10-5 Pa.) ≤ 22 dB SPL (127˚)
Induction Noise from ≤ 0 dB SPL ≤ 0 dB SPL ≤ 0 dB SPL ≤ 10 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL
Ext. Magnetic Field
(dB SPL/1 x 10-7 T)
(0 dB SPL = 2 × 10-5 Pa.)
Wind Noise ≤ 60 dB SPL ≤45 dB SPL ≤ 54 dB SPL ≤ 50 dB SPL ≤ 45 dB SPL ≤ 40 dB SPL ≤ 55 dB SPL ≤ 57 dB SPL
(0 dB SPL = 2 × 10-5 Pa.)
Max. Input 125 dB SPL 114 dB SPL 130 dB SPL 130 dB SPL 134 dB SPL 126 dB SPL 126 dB SPL 130 dB SPL
Sound Pressure Level
(0 dB SPL = 2 × 10-5 Pa.)
Tone Low-cut — M,V M,V M,V M,V — — M,V
Control
High-cut — — — — — — — —
Power Battery — IECR6 or LR6 DC-MS5 SUM-3 (NS) SUM-3 (NS) IECR6 or LR6 IECR6 or LR6 —
Supply power (Optional)
Ext. O O O — — O O O
power
Standard Battery — 1.5 V 1.5 V/DC-MS5 1.5 V 1.5 V 1.5 V 1.5 V —
Operating (Optional)
Voltage
Ext. DC12-48 DC48 DC12-48 — — DC12-48 DC12-48 DC12-48
power
Current Battery — ≤ 0.3 mA ≤ 1.75 mA x 2/DC-MS5 ≤ 11.0 mA ≤ 5 mA ≤ 0.23 mA ≤ 0.23 mA —
Drain (DC12 V) (Optional)
AC ≤ 2.4 mA ≤ 0.5 mA ≤ 2 mA x 2x — — ≤ 2 mA ≤ 2 mA ≤ 2 mA
power (DC48 V)
Dimensions mm 21 dia. x 226 24 dia. x 304 47.5 dia. x 212 40 dia. x 246 27 dia. x 190 Max. 23 dia. 12 dia. x 326 to 448 12 dia. x 326 to 482
8.5 dia. x 364 86 dia. (Table Stand)
inch 27/32 dia. x 9 31/32 dia. x 12 1 7/8 dia. x 8 3/8 1 5/8 dia. x 9 3/4 1 1/6 dia. x 7 1/2 Max. 29/32 dia. 1/2 dia. x 12 7/8 to 17 3/8 1/2 dia .x 14 1/6 to 19
11/32
dia.x 14 3/8 3 1/2 dia. (Table stand)
Mass * 165 g 230 g 215 g 366 g 215 g 125 g 325 g 130 g
5.8 oz 8.1 oz 7.6 oz 13 oz 7.6 oz 4.4 oz 11.5 oz 4.6 oz
EQUIPMENT

Supplied Wind screen (x 1) Wind screen (x 1) Wind screen (x 1) Wind screen (x 1) Wind screen (x 1) Wind screen (x 1) Wind screen (x 1) Wind screen (x 1)
AUDIO

Accessories Microphone Microphone Microphone Microphone Microphone

holder (x 1) holder (x 1) holder (x 1) holder (x 2) holder (x 1)
Microphone spacer (x 1) Microphone cable (x 1) Microphone cable (x 1) Microphone cable (x 1) Stand adaptor (x 2)
Stand adaptor (x 2) Stand adaptor (x 1) Stand adaptor (x 2) Stand adaptor (x 2)
Carrying case (x 1)
Remarks Short Short MS Stereo MS Stereo — — — —
Shotgun Shotgun

* Without the battery for condenser and electret condenser microphones.

–293–
 3-1 Wired Microphones
Specifications
ECM-Series

ECM-670 ECM-672 ECM-MS5 ECM-999PR ECM-23F3PR ECM-510 ECM-530 ECM-531

Microphone XLR-3-12C type XLR-3-12C type XLR-5-12C type XLR-5-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type
Connector
Supplied Cable — — XLR-5-11C type XLR-5-11C type XLR-3-11C type — — —

↔
XLR-3-12C type XLR-3-12C type Phone plug
( x 2)
Cable Length — — 3 m (9.8 feet) 2.5 m (8.2 feet) 6 m (19.7 feet) — 2 m (6.6 feet) —
Available XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type Phone jack XLR-3-11C type XLR-3-11C type XLR-3-11C type
Receptacle
External Power Yes Yes Yes No No Yes Yes Yes
Supply (AC-148F)
of Equivalent
Recommended — SUM-3 (NS) LR6 SUM-3 (NS) SUM-3 (NS) SUM-3 (NS) SUM-3 (NS) —
Sony Battery (Alkaline)
Battery Life (Approx.) — 3,000 H 20 H 80 H 150 H 5,000 H 5,000 H —
Supplied Mic Yes — Yes Yes Yes Yes — —
Holder
Stand Screw/ PF1/2-inch thread — PF1/2-inch thread PF 1/2-inch thread PF1/2-inch thread PF1/2-inch thread — —
Mic Holder
Screw
Supplied NS5/8-inch thread — NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread — —
Stand Adaptor W3/8-inch thread W3/8-inch thread W3/8-inch thread W3/8-inch thread W3/8-inch thread
Mounting on A-12 Yes Yes Yes Yes Yes Yes — —
(Available screw
PF1/2-inch thread
U5/16-inch thread)
Mounting on A-25 Yes — Yes Yes Yes — — —
(Available screw
U5/16-inch thread,
PF1/2-inch thread)
Mounting on A-25N Yes — Yes Yes Yes — — —
(Available screw
NS5/8-inch thread)
Mounting on CRS-3P Yes Yes Yes No Yes Yes — —
EQUIPMENT
AUDIO

–294–
3-1 Wired Microphones

ECM-44 Series
Lavalier Microphones
•8.5 mm dia. x 14.5 mm (11⁄32 inch dia. x 19⁄32 inch),
2 g (0.07 oz) microphone head •Excellent cost/performance
ratio •AA-size battery operation

ECM-44B (Black)
•Complete with in-line battery unit

ECM-44BC (Black)
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with the Sony wireless transmitter

ECM-44BPT (Black)
•Pigtail connection, without battery unit or connector

ECM-44BMP (Black)
•Fitted with a 1.2 m cable terminating in a 3-pole mini plug for
use with the Sony wireless transmitter

Frequency Response Characteristics Directivity Characteristics

Omni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°
0° -15
Response (dB)

0 -20
90°
90° 90°
180°
-10

120° 120°
-20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
100Hz/1KHz
3KHz
Frequency (Hz) 10KHz

ECM-55 Series
Lavalier Microphones
•10.6 mm dia. x 21 mm (7⁄16 inch dia. x 27⁄32 inch), 6.5 g
(0.2 oz) microphone head •Frequency response tailored for
enhanced presence and improved voice quality in lavalier
applications •2-way powering — AA-size battery or external
power supply (DC 12 V to 48 V)

ECM-55B (Black)
•Complete with in-line battery unit for 2-way powering

ECM-55BC (Black)
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with the Sony wireless transmitter
EQUIPMENT
AUDIO

ECM-55BPT (Black)
•Pigtail connection, without battery unit or connector

Frequency Response Characteristics Directivity Characteristics

Omni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°
0°
-15
Response (dB)

0 -20
180°
90° 90° 90°

-10

120° 120°
-20

150° 150°

20 50 100 200 500 1k 2k 5k 10k 20k 180°

100Hz
1KHz
Frequency (Hz) 3KHz
10KHz

–295–
 3-1 Wired Microphones

ECM-66 Series
Lavalier Microphones
•10.6 mm dia. x 24.3 mm (7/16 inch dia. x 31/32 inch),
7 g (0.24 oz) microphone head •Designed for instrumental
applications •2-way powering — AA-size battery or external
power supply (DC 24 V to 48 V) •130 dB SPL max. input
sound pressure level

ECM-66B (Black)
•Complete with in-line battery unit for 2-way powering

ECM-66BC (Black)
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with the Sony wireless transmitter

Frequency Response Characteristics Directivity Characteristics

Uni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°
-15
0°
Response (dB)

0 -20
90° 90° 90°

-10 180°

120° 120°
-20

150° 150°

20 50 100 200 500 1k 2k 5k 10k 20k 180°

100Hz
1KHz
Frequency (Hz) 10KHz

ECM-77 Series
Lavalier Microphones
•5.6 mm dia. x 12.5 mm (1⁄4 inch dia. x 1⁄2 inch), 1.5 g (0.04
oz) microphone head •High performance, frequency
response 40 Hz to 20,000 Hz •2-way powering — AA-size
battery or external power supply (DC 12 V to 48 V)

ECM-77S (Silver)/ECM-77B (Black)

•Complete with in-line battery unit for 2-way powering

ECM-77SC (Silver)/ECM-77BC (Black)/

ECM-77FC (Beige Color Finish)
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with the Sony wireless transmitter
EQUIPMENT
AUDIO

ECM-77BPT (Black)/ECM-77FPT (Beige Color Finish)

•Pigtail connection, without battery unit or connector

ECM-77BMP (Black)
•Fitted with a 1.2 m cable terminating in a 3-pole mini plug for
use with the Sony wireless transmitter
Frequency Response Characteristics Directivity Characteristics
Omni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°
-15
Response (dB)

0 0° -20
90°
90° 90°
180°
-10

120° 120°
-20

150° 150°

20 50 100 200 500 1k 2k 5k 10k 20k 180°

100Hz
1KHz
Frequency (Hz) 6KHz
10KHz

–296–
3-1 Wired Microphones

ECM-121BMP
Lavalier Microphone
•8.5 mm dia. × 17.0 mm (11⁄32 inch dia. × 11⁄16 inch), 3 g (0.11
oz) microphone head
•Uni-directional
•Fitted with a 0.2 m cable terminating in a 3-pole mini plug for
use with Sony wireless transmitter

ECM-122BMP
Lavalier Microphone
•8.5 mm dia. × 17.0 mm (11⁄32 inch dia. × 11⁄16 inch), 3 g (0.11
oz) microphone head
•Uni-directional
•Fitted with a 1.2 m cable terminating in a 3-pole mini plug for
use with Sony wireless transmitter

ECM-166 Series
Lavalier Microphone
•12.5 mm dia x 23.5 mm (1⁄2 inch dia. x 15⁄16 inch), 3.5 g (0.12
EQUIPMENT

oz) microphone head •Uni-directional

AUDIO

ECM-166BC
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with Sony wireless transmitter

ECM-166BMP
•Fitted with a 1.2 m cable terminating in a 3-pole mini plug for
use with Sony wireless transmitter

–297–
 3-1 Wired Microphones

ECM-310 Series
Headset Microphone
•Headset-style uni-directional microphone for sound
reinforcement applications

ECM-310BC
•Fitted with a 1.2 m cable terminating in a SMC9-4P
connector for use with the Sony wireless transmitter

ECM-310BMP
•Fitted with a 1.2 m cable terminating in a 3-pole mini plug for
use with the Sony wireless transmitter

ECM-350BC
Headset Microphone
•Headset-style omni-directional microphone for TV/sound
reinforcement applications •Fitted with a 1.2 m cable
terminating in a SMC9-4P connector for use with the Sony
wireless transmitter
EQUIPMENT
AUDIO

–298–
3-1 Wired Microphones
Specifications
ECM-44 ECM-55 ECM-66 ECM-77 ECM-121
Model Variations Type A Standard type: 3.0 m (3.9 feet) cable terminating in an XLR-3-12C type connector, battery equipped
- Model name 44B 55B 66B 77S, 77B —
- Cable length Type B Pig tail type: 3.0 m (3.9 feet) cable without connector, battery
- Output connector 44BPT 55BPT — 77BPT, 77FPT —
- Battery Type C SMC type: 1.2 m (3.9 feet) cable terminating in a SMC9-4P type connector, without battery
- Finish (B: Black, 44BC 55BC 66BC 77SC, 77BC, 77FC —
S: Silver, F: Beige) Type D BMP type: 1.2 m (3.9 feet)* cable terminating in a 3.5 mm dia. 3-pole mini plug, without battery
44BMP — — 77BMP 121BMP
Capsule Type Electret Condenser Electret Condenser Electret Condenser Electret Condenser Electret Condenser
Frequency Response 40 to 15,000 Hz 30 to 18,000 Hz 70 to 14,000 Hz 40 to 20,000 Hz 100 to 10,000 Hz
Directivity Omni-directional Omni-directional Uni-directional Omni-directional Omni-directional
Sensitivity Type A -53.0 dB ±3 dB -52.0 dB ±2 dB -50.0 dB ±2 dB -52.0 dB ±2 dB —
(0 dB=1 V/Pa, at 1 kHz) Type B, C, D -40 dB (10 mV) -38.5 dB (11.9 mV) -36.5 dB (15 mV) -39.0 dB (11.2 mV) -41 dB (8.9 mV)
Output Impedance Type A 250 Ω ±20% (balanced) 100Ω ±20% (balanced) 100 Ω ±20% (balanced) 150 Ω ±20% (balanced) —
At 1 kHz Type B, C, D — — — — 2.5 kΩ ±30% (unbalanced)
Dynamic Range ≥90 dB ≥98 dB ≥101 dB ≥90 dB —
Signal-to-noise Ratio (A-weighted, 1 kHz, 1 Pa.) ≥62 dB ≥66 dB ≥65 dB ≥64 dB —
Inherent Noise (0 dB SPL=2 x 10-5 Pa.) ≤32 dB SPL ≤28 dB SPL ≤29 dB SPL ≤30 dB SPL —
Wind Noise (w/wind screen, at 2 m/s) ≤40 dB SPL ≤40 dB SPL ≤50 dB SPL ≤40 dB SPL —
(0 dB SPL=2 x 10-5 Pa.)
Induction Noise from External Magnetic Field ≤5 dB SPL ≤5 dB SPL ≤5 dB SPL ≤5 dB SPL —
(dB SPL/1 x 10-7 T)
-5
(0 dB SPL=2 x 10 Pa.)
Maximum Input Sound Pressure Level 122 dB SPL 126 dB SPL 130 dB SPL 120 dB SPL —
(0 dB SPL=2 x 10-5 Pa.)
Power Battery SUM-3 (NS)(1.5 V) SUM-3 (NS)(1.5 V) SUM-3 (NS)(1.5 V) SUM-3 (NS)(1.5 V)
Supply Battery Life Approx. 5000 H Approx. 5000 H Approx. 300 H Approx. 5000 H
Ext. Power — DC 12 to 48 V DC 24 to 48 V DC 12 to 48 V —
Normal Operating Voltage Type A: DC 1.5 V, Type B, C, D: DC 3 V DC 3 V
(supply range: DC 3 - 10 V) (supply range: DC 3 - 10 V)
Current Drain Less than 0.3 mA Less than 3.5 mA Less than 0.3 mA Less than 0.4 mA
Dimensions Microphone Head 8.5 mm dia. × 14.5 mm 10.6 mm dia. × 21 mm 10.6 mm dia. × 24.2 mm 5.6 mm dia. × 12.5 mm 8.5 mm dia. × 17.0 mm
( ⁄32 inch dia. × ⁄32 inch) ( ⁄16 inch dia. × ⁄32 inch)
11 19 7 27 ( ⁄16 inch dia. × ⁄32 inch)
7 31 ( ⁄4 inch dia. × ⁄2 inch)
1 1 ( ⁄32 inch dia. × 11⁄16 inch)
11

Power Unit 20.0 mm dia. × 126 mm 20.0 mm dia. × 133 mm 20.0 mm dia. × 163 mm 20.0 mm dia. × 133 mm —
(13⁄16 inch dia. × 5 inches) (13⁄16 inch dia. × 5 1⁄4 inches) (13⁄16 inch dia. × 6 1⁄2 inches) (13⁄16 inch dia. × 5 1⁄4 inches)
Mass Microphone Head 2 g (0.07 oz) 6.5 g (0.23 oz) 7 g (0.25 oz) 1.5 g (0.05 oz) 3 g (0.11 oz)
Total 121 g (4.3 oz) 127 g (4.5 oz) 167 g (5.9 oz) 122 g (4.3 oz) —
Supplied Accessories S.H. holder clip (× 1) S.H. holder clip (× 1) S.H. holder clip (× 1) S.H. holder clip (× 1) Holder clip (× 1)
(S: Single type, V: Vertical type, U. wind screen (× 1) S.V. holder clip (× 1) S.V. holder clip (× 1) S.V. holder clip (× 1) U. wind screen (× 1)
M: Metal-mesh type, U: Urethane type) Microphone case (× 1) M wind screen (× 1) U. wind screen (× 1) M. wind screen (× 1)
Microphone case (× 1) Microphone case (× 1) Microphone case (× 1)
*ECM-121BMP Cable length: 0.2 m (7 7⁄8 inches)

ECM-122 ECM-166 ECM-310 ECM-350

Model Variations Type A Standard type: 3.0 m (3.9 feet) cable terminating in an XLR-3-12C type connector, battery equipped
- Model name — — — —
- Cable length Type B Pig tail type: 3.0 m (3.9 feet) cable without connector, battery
- Output connector — — — —
- Battery Type C SMC type: 1.2 m (3.9 feet) cable terminating in a SMC9-4P type connector, without battery
- Finish (B: Black, — 166BC 310BC 350BC
S: Silver, F: Beige) Type D BMP type: 1.2 m (3.9 feet) cable terminating in a 3.5 mm dia. 3-pole mini plug, without battery
122BMP 166BMP 310BMP —
Capsule Type Electret Condenser Electret Condenser Electret Condenser Electret Condenser
Frequency Response 100 to 10,000 Hz 100 to 10,000 Hz 70 to 12,000 Hz 40 to 15,000 Hz
Directivity Omni-directional Uni-directional Wide-cardioid Omni-directional
Sensitivity Type A — — — —
(0 dB=1 V/Pa, at 1 kHz) Type B, C, D -41 dB (8.9 mV) -45 dB (5.6 mV) -44 dB (6.3 mV) ±3 dB -40 dB (10 mV) ±3 dB
Output Impedance Type A — — — —
At 1 kHz Type B, C, D 2.5 kΩ ±30% (unbalanced) 2.5 kΩ ±30% (unbalanced) 800 Ω ±30% (unbalanced) 2.5 kΩ ±30% (unbalanced)
Dynamic Range — ≥96 dB ≥93 dB ≥100 dB
Signal-to-noise Ratio (A-weighted, 1 kHz, 1 Pa.) — ≥60 dB ≥60 dB ≥62 dB
Inherent Noise (0 dB SPL=2 x 10-5 Pa.) — ≤34 dB SPL ≤34 dB SPL ≤32 dB SPL
≤63 dB SPL ≤40 dB SPL
EQUIPMENT

Wind Noise (w/wind screen, at 2 m/s) — —

AUDIO

(0 dB SPL=2 x 10-5 Pa.)

Induction Noise from External Magnetic Field — — — —
(dB SPL/1 x 10-7 T)
-5
(0 dB SPL=2 x 10 Pa.)
Maximum Input Sound Pressure Level — 130 dB SPL 127 dB SPL 132 dB SPL
(0 dB SPL=2 x 10-5 Pa.)
Power Battery
Supply Battery Life
Ext. Power — — — —
Normal Operating Voltage DC 3 V DC 5 V
(supply range: DC 3 - 10 V) (supply range: DC 3 - 10 V)
Current Drain Less than 0.4 mA Less than 0.32 mA Less than 0.3 mA
Dimensions Microphone Head 8.5 mm dia. × 17.0 mm 12.5 mm dia. × 23.5 mm 10.0 mm dia. × 152 mm 8.5 mm dia. × 15.6 mm
( ⁄32 inch dia. × ⁄16 inch)
11 11 ( ⁄2 inch dia. × ⁄16 inch)
1 15 ( ⁄32 inch dia. × ⁄8 inch) (11/32 inch dia. x 5/8 inch)
13 5

Power Unit — — — —

Mass Microphone Head 3 g (0.11 oz) 3.5 g (0.12 oz) — —

Total — — 46 g (17 oz) 44 g (1.6 oz)
Supplied Accessories Holder clip (× 1) Holder clip (× 1) U. wind screen (× 1) U. wind screen (× 1)
(S: Single type, V: Vertical type, U. wind screen (× 1) U. wind screen (× 1)
M: Metal-mesh type, U: Urethane type)

–299–
 3-1 Wired Microphones

F-115 •Weather resistant for outdoor applications •Ideal for reporter

use •Frequency response: 40 to 12,000 Hz
Dynamic Microphone
Frequency Response Characteristics Directivity Characteristics
Omni-Directional 0°
+20
30° OdB 30°
-5
+10 60° -10 60°
0° -15
Response (dB)

0 -20
180° 90° 90°

-10
90°
120° 120°
-20

150° 150°

20 50 100 200 500 1k 2k 5k 10k 20k 180°

100Hz/1KHz
4KHz
Frequency (Hz) 9KHz

F-710 •For multi-purpose applications •Built-in TALK switch •High

sensitivity with the Neodymium magnet •XLR-3-12C type
Dynamic Microphone connector •Frequency response: 70 to 15,000 Hz
Frequency Response Characteristics Directivity Characteristics
0°
•Dimensions: 54 mm dia. x 177 mm (2 1⁄4 inches dia. x 7
30° OdB
-5
30°
inches) •Mass: 250 g (8.8 oz)
Uni-Directional -10
60° 60°
+20
-15
Response (dB)

+10 -20

0° 90° 90°
0
90°

-10
120° 120°
180°
-20

-30 150° 150°

20 50 100 200 500 1K 2K 5K 10K 20KHz 180°
100Hz
1KHz
Frequency (Hz)
6KHz

F-720 •For multi-purpose applications •Convenient TALK switch for

turning on and off the microphone •Vibration proof capsule
Dynamic Microphone suspension •XLR-3-12C type connector •Frequency
Frequency Response Characteristics Directivity Characteristics
0°
response: 50 to 13,000 Hz •Dimensions: 37.6 mm dia. x 160
+ 20
Uni-Directional 30° 0dB
-5
30°
mm (1 1⁄2 inches dia. x 6 3⁄8 inches) •Mass: 260 g (9.2 oz)
60° - 10 60°
+ 10
- 15
Response (dB)

0° - 20
0
90° 90° 90°

- 10 180°
120° 120°
- 20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
100Hz
1KHz
Frequency (Hz) 6KHz

F-730 •For vocal applications •Convenient TALK switch for turning on

and off the microphone •Vibration-proof capsule suspension
Dynamic Microphone •XLR-3-12C type connector •Frequency response: 50 to
Frequency Response Characteristics Directivity Characteristics
0°
13,000 Hz •Dimensions: 44.4 mm dia. x 166 mm
+ 20
Uni-Directional 30° 0dB
-5
30°
(1 3⁄4 inches dia. x 6 5⁄8 inches) •Mass: 250 g (8.8 oz)
60° - 10 60°
+ 10
- 15
Response (dB)

0° - 20
0
90° 90° 90°
EQUIPMENT

- 10
AUDIO

180° 120° 120°

- 20

150° 150°
20 50 100 200 500 1k 2k 5k 10k 20k 180°
100Hz
1KHz
Frequency (Hz) 6KHz

F-740 •For vocal and instrumental pick-up •Rugged capsules in a

resilient body structure •Special AlNiCo Magnet •High quality
Dynamic Microphone CCAW (Copper Clad Alminium Wire) voice coil •XLR-3-12C
Frequency Response Characteristics Directivity Characteristics
0°
type connector •Frequency response: 50 to 18,000 Hz
Uni-Directional
+20 30° 0dB
-5
30°
•Dimensions: 51 mm dia. x 165 mm (2 1⁄8 inches dia. x 6 1⁄2
+10 60° - 10 60° inches) •Mass: 290 g (10.2 oz)
- 15
Response (dB)

0°
- 20
0
90° 90° 90°

-10

180° 120° 120°

-20

150° 150°
-30
20 50 100 200 500 1K 2K 5K 10K 20K Hz 180°
100Hz
1KHz
Frequency (Hz) 6KHz

–300–
3-1 Wired Microphones

F-780 •For vocal recording •Rugged capsules in a resilient body

structure •Special AlNiCo Magnet •High quality edgewise
Dynamic Microphone winding CCAW (Copper Clad Alminium Wire) voice coil
Frequency Response Characteristics Directivity Characteristics
0°
•XLR-3-12C type connector •Frequency response: 50 to
Uni-Directional
+20 30° 0dB
-5
30°
18,000 Hz •Dimensions: 51 mm dia. x 165 mm (2 1⁄8 inches
+10 60° - 10 60° dia. x 6 1⁄2 inches) •Mass: 290 g (10.2 oz)
- 15
Response (dB)

0°
- 20
0
90° 90° 90°

-10

180° 120° 120°

-20

150° 150°
-30
20 50 100 200 500 1K 2K 5K 10K 20K Hz 180°
100Hz
1KHz
Frequency (Hz) 6KHz

Specifications
F-Series

F-710 F-720 F-730 F-740 F-780 F-115*2

(CE7) (CE)
Capsule Type Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic
Frequency Response 70 to 15,000 Hz 50 to 13,000 Hz 50 to 13,000 Hz 50 to 18,000 Hz 50 to 18,000 Hz 40 to 12,000 Hz
Directivity UNI UNI UNI UNI UNI OMNI
Effective Output
Level at 1 kHz, -56.0 dBm -60.0 dBm -59.0 dBm -56.0 dBm -55.0 dBm -57.8 dBm
(0 dBm=1 mW/1 Pa.)
Sensitivity -54.0 dB± 3.0 dB -57.0 dB± 3.0 dB -56.0 dB± 3.0 dB -54.0 dB± 2.0 dB -53.0 dB± 2.0 dB -54.0 dB± 2.0 dB
(0 dB=1 V/1 Pa., at 1 kHz)
Output Impedance at
1 kHz (balanced) 400 Ω ±20% 500 Ω ±20% 500 Ω ±20% 400 Ω ±20% 400 Ω ±20% 600 Ω ±20%

Induction Noise from

Ext. Magnetic Field
≤ 5 dB SPL ≤ 10 dB SPL ≤ 10 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL
(dB SPL/1 x 10-7 T)
(0 dB SPL + 2 x 10-5 Pa.)
Wind Noise
≤ 55 dB SPL ≤ 55 dB SPL ≤ 45 dB SPL ≤ 50 dB SPL ≤ 50 dB SPL ≤ 40 dB SPL
(0 dB SPL + 2 x 10-5 Pa.)
Microphone Connector XLR-3-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type —
Supplied Cable — — — — — XLR-3-12C XLR-3-11C
Cable Length — — — — — 6 m (19.7 feet)
Available Receptacle XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-12C type
Supplied Mic Holder Yes Yes Yes Yes Yes Yes
SAD-700 Optional Mic Holder Yes — — Yes Yes —
Stand Screw/ PF1/2-inch thread PF1/2-inch thread PF1/2-inch thread PF1/2-inch thread PF1/2-inch thread PF1/2-inch thread
Mic Holder Screw
Supplied Stand Adaptor NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread NS5/8-inch thread W3/8-inch
W3/8-inch thread W3/8-inch thread W3/8-inch thread W3/8-inch thread W3/8-inch thread W3/8-inch thread thread
Mounting on A-12
(Available screw Yes Yes Yes Yes Yes Yes
PF1/2-inch thread
U5/16-inch thread)
Mounting on A-25
(Available screw Yes Yes Yes Yes Yes Yes
U5/16-inch thread
PF1/2-inch thread)
Mounting on A-25N
(Available screw Yes Yes Yes Yes Yes Yes
NS5/8-inch thread)
Mounting on CRS-3P Yes Yes Yes Yes Yes Yes
EQUIPMENT

Dimensions mm 54 dia. x 177 37.6 dia. x 160 44.4 dia. x 166 51 dia. x 165 51 dia. x 165 Max. 30 dia. , 24.6 dia. x 173
AUDIO

inch 2 1/4 dia. x 7 1 1/2 dia. x 6 3/8 1 3/4 dia. x 6 5/8 2 1/8 dia. x 6 1/2 11/8 dia. x 6 1/2 31/32 dia. x 6 7/8
Mass*1 250 g 260 g 250 g 290 g 290 g 270 g
8.8 oz 9.2 oz 8.8 oz 10.2 oz 10.2 oz 9.5 oz
Supplied Accessories Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1)
Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2)
Wind screen (x 1)
Microphone case (x 1)
Remarks — — — — — —

* 1 Without the battery for condenser and electret condenser microphones.

* 2 The F-115(CE7) is suitable for use with TC-D5 PROII. The F-115(CE) is suitable for use with TC-D5 PRO.

–301–
 3-2 Wired Microphones accessories

AC-148F
AC Power Supply
•System: 2-channel external power supply •Power
requirements: AC 220 to 240 V, 50/60 Hz •Output voltage:
DC 48 V •Dimensions: 201 (W) x 74 (H) x 169 (D) mm
(8 x 3 x 6 3⁄4 inches) • Mass: 2 kg (4 lb 7 oz)

A-12
Table Stand
•Available screw: U5⁄16-inch thread
PF1⁄2-inch thread
•Mass: 1.4 kg (3 lb 1 oz)

A-25
Table Stand
•Available screw: U5⁄16-inch thread
PF1⁄2-inch thread
•Mass: 1.0 kg (2 lb 3 oz)

A-25N
Table Stand
•Available screw: NS5⁄8-inch thread
•Mass: 1.0 kg (2 lb 3 oz)
EQUIPMENT
AUDIO

SAD-26
Microphone Stand Pole
•Available screw: U5⁄16-inch thread
PF1⁄2-inch thread (male)
PF1⁄2-inch thread (female)
•Height: 120 mm (4 3/4 inches)

–302–
3-2 Wired Microphones accessories

SAD-28
Shock-mounted Adaptor
• Available screw: U5⁄16-inch thread
PF1⁄2-inch thread (male)
PF1⁄2-inch thread (female)

EC-10XLR2/5XLR2
Microphone Cable
• Cable length: 10 m (32.8 feet) or 5 m (16.4 feet)
• Connectors: XLR-3-11C type ↔ XLR-3-12C type

CRS-3P
Cradle Suspension
•Available screw: PF1⁄2-inch thread •Supplied stand screw
adaptor: NS5⁄8-inch thread •Grip: 19 to 24 mm dia. (3⁄4 to 31⁄32
inch dia.) •Mass: 150 g (5.3 oz)

SAD-700
Microphone Holder
•Available screw: PF1⁄2-inch thread
•Grip: 24 mm dia. (31⁄32 inch dia.)
•Mass: 70 g (2.5 oz) EQUIPMENT
AUDIO

B-305B
Boom Stand
•Available screw: PF1/2-inch thread, U5⁄16-inch thread
•Supplied stand screw adaptor: NS5⁄8-inch thread, W3⁄8-inch
thread •Boom length: 828 mm (32 5⁄8 inches) •Stand height:
980 to 1500 mm (38 5⁄8 to 59 1⁄8 inches) •Mass: 4.6 kg (10 lb
2 oz)

–303–
 3-2 Wired Microphones accessories

B-500
Floor Stand
•Available screw: PF1/2-inch thread, U5⁄16-inch thread
•Supplied stand screw adaptor; NS5⁄8-inch thread, W3⁄8-inch
thread •Pole length: 880 to 1530 mm (34 3⁄4 x 60 1⁄4 inches)
w/o stand adaptor •Mass: 4.6 kg (10 lb 2 oz)

Batteries
Sony IEC MEDIA Eveready Voltage
No.
S-006P (U) 6F-22 1604 216 9V
006P
(Alkaline) — 1604A 522 9V
SUM-1(NS) P20 13D 1250 1.5 V
SUM-3(NS) R6P 15D 1215 1.5 V
AM3 LR6 15A E91 1.5 V
3CR-MIC — — — 9V

Holder Clips and Wind Screens

Type Finish ECM-77 ECM-66 ECM-55 ECM-44 Remarks

Single (Horizontal) Black SAD-H77B SAD-H55B SAD-H55B SAD-H44B 10 pcs in each

package

Double (Horizontal) 6 pcs in each

Black SAD-W77B SAD-W55B — — package
Holder Clip

Single (Vertical) Black SAD-V77B SAD-V55B — — 10 pcs in each

package

Safety Pin Type 6 pcs in each

Silver type SAD-S77 SAD-S55 SAD-S55 — package

Power
3 pcs in a
Supply Silver type SAD-B100 package
Holder

Silver type AD-R77S — — —

Metal 6 pcs in each
package
Black AD-R77B — AD-R55B —

Wind Screen 12 pcs in each

Urethane Black — AD-R66B — AD-R44B package
EQUIPMENT
AUDIO

12 pcs in each
Urethane 6 colors AD-C77 AD-C66 AD-C55 — package
(6 colors x 2 pcs)

–304–
4 UHF Synthesized Wireless Microphone System

WRT-830A
UHF Synthesized Wireless Microphone
•High quality sound for vocals •PLL synthesized control
transmission •Approx.8 hours of continuous operation is
provided by 2 AA-size (LR6) alkaline batteries. The battery
status can be shown on the built-in LCD •An ON/OFF power
switch inside the body for free from misoperation, preventing
a user from accidentally turning-off the switch during
operation •Low handling noise due to the electret capsule
•Selectable RF Output 10 mW or 2.5 mW •Easy-to-read LCD
indication

WRT-810A
UHF Synthesized Wireless Microphone
•PLL synthesized control transmission •Approx. 8 hours of
continuous operation is provided by 2 AA-size (LR6) alkaline
batteries. The battery status can be shown on the built-in
LCD. •Uni-directional dynamic capsule •Easy-to-read LCD
display •Built-in talk switch •Selectable RF output 10 mW or
2.5 mW

WRT-807A
UHF Synthesized Dynamic Wireless Microphone
•High sound quality for vocals - powerful, crisp and clean
sound as well as presence in the low and mid frequency
range •Dynamic microphone capsule which is employed in
the Sony F-780 professional vocal microphone •LCD for
display of channels, attenuator and accumulated operating
hours •Up to 5 hours of continuous operation with a single
AA-size (LR6) battery •10 mW RF power output •Battery
alarm transmitted to compatible receivers •Newly-developed
lockable power switch to prevent accidental operation
EQUIPMENT
AUDIO

WRT-822A
UHF Synthesized Transmitter
•PLL synthesized control transmission •Approx.8 hours
continuous operation with 2 AA-size (LR6) alkaline batteries
•Compact and lightweight design, measuring 63 (W) x 103
(H) x 17 (D) mm (2 1⁄2 x 4 1⁄8 x 11⁄18 inches) •Easy-to-read LCD
for comprehensive system information such as battery
status, accumulated working time and frequency level
•Lavalier microphones capability

–305–
 4 UHF Synthesized Wireless Microphone System

WRT-805A
UHF Synthesized Body Pack Transmitter
•Smoothly tapered body pack with compact, lightweight
design •Battery alarm transmitted to compatible receivers
•LCD for display of channel, attenuator and accumulated
operating hours •Up to 6 hours of continuous operation with
a single AA-size (LR6) alkaline battery •10 mW RF power
output •3-pole mini jack with a lock mechanism for secure
lavalier cable clamping •Switchable -40 dB/-60 dB input level
and PHASE switches for guitar and lavalier microphone
•Microphone options: GC-0.7MP Guitar Cable, ECM-44BMP/
ECM-77BMP/ECM-121BMP/ECM-122BMP/ECM-166BMP
Electret Condenser Microphone and ECM-310BMP Electret
Condenser Headset Microphone

WRT-808A
UHF Synthesized Transmitter
•Plug-on transmitter - converts a microphone to a wireless
microphone •Fitted with an XLR connector •Compact and
lightweight body, providing balanced handling •Durable
connecting mechanism for dependable operation •Switchable
RF power output, 50 mW for a longer working distance or 10
mW for multi-channel operation •Variable input attenuation, 0
dB to 50 dB •Battery alarm transmitted to compatible
receivers •LED for AF/Peak, battery indication •Up to 4 hours
continuous operation with two AA-sized (LR6) alkaline
batteries
*Not available in some areas.

ECM-77BC
Lavalier Microphone
•5.6 mm dia. x 12.5 mm (1⁄4 inch dia. x 1⁄2 inch), 1.5 g (0.04
oz) microphone head •High performance, 40 Hz to 20,000 Hz
frequency response •SMC9-4P connector to interface with
WRT-822A UHF Synthesised Transmitter
EQUIPMENT
AUDIO

ECM-310BC
Electret Condenser Microphone
•Headset-style microphone for sound reinforcement
applications •Fitted with a wide-cardioid microphone, which
provides crisp and clear sound while isolating desired sound
from surrounding ambience •Designed for use with the WRT-
822A UHF Synthesized Transmitter (also suitable for use
with the WRT-860A model) •Adjustable hinge and goose-
neck for a wide range of adjustment •Unobtrusive, anti-slide
headband •SMC9-4P connector to interface with WRT-822A
UHF Synthesised Transmitter

–306–
4 UHF Synthesized Wireless Microphone System

ECM-350BC
Electret Condenser Microphone
•Headset-style microphone for TV/sound reinforcement
applications •Fitted with an omni-directional microphone,
which reduces pop-noises and allows optimum sound pick-
up and enhanced intelligibility under almost any situation
•Designed for use with the WRT-860A UHF Synthesized
Transmitter (also suitable for use with the WRT-822A model)
•Lightweight and with flexible microphone positioning for
optimum vocal pick-up •Unobtrusive, anti-slide headband
•SMC9-4P connector to interface with WRT-822A UHF
Synthesised Transmitter

ECM-44BMP
Lavalier Microphone
•8.5 mm dia. × 14.5 mm (11⁄32 inch dia. × 19⁄32 inch), 2 g (0.07
oz) microphone head •Omni-directional •For use with
WRT-805A UHF Synthesized Transmitter

ECM-77BMP
Lavalier Microphone
•5.6 mm dia. × 12.5 mm (1⁄4 inch dia. × 1⁄2 inch), 1.5 g (0.05
oz) microphone head •Omni-directional •For use with
WRT-805A UHF Synthesized Transmitter

EQUIPMENT
AUDIO

ECM-121BMP
Lavalier Microphone
•8.5 mm dia. × 17.0 mm (11⁄32 inch dia. × 11⁄16 inch), 3 g (0.11
oz) microphone head •Uni-directional •For use with
WRT-805A UHF Synthesized Transmitter

–307–
 4 UHF Synthesized Wireless Microphone System

ECM-122BMP
Lavalier Microphone
•8.5 mm dia. × 17.0 mm (11⁄32 inch dia. × 11⁄16 inch), 3 g (0.11
oz) microphone head •Uni-directional •For use with
WRT-805A UHF Synthesized Transmitter

ECM-166BMP
Lavalier Microphone
•12.5 mm dia. × 23.5 mm (1⁄2 inch dia. × 15⁄16 inch), 3.5 g
(0.12 oz) microphone head •Uni-directional •For use with
WRT-805A UHF Synthesized Transmitter

ECM-310BMP
Headset Microphone
•Fitted with a wide-cardioid microphone for sensitivity and
noise rejection •Designed for use with WRT-805A UHF
Synthesized Transmitter •Adjustable hinge and goose-neck
for a wide range of adjustment •Unobtrusive, anti-slide
headband •For use with WRT-805A UHF Synthesized
Transmitter
EQUIPMENT
AUDIO

–308–
4 UHF Synthesized Wireless Microphone System
Specifications
WRT-830A WRT-810A WRT-807A
Oscillator Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer
Type of Emission 110KF3E 110KF3E 110KF3E
RF Power Output 10 mW or 2.5 mW selectable 10 mW or 2.5 mW selectable 10 mW (50 Ω load)
Antenna 1⁄4 wave length whip antenna 1⁄4 wave length whip antenna 1⁄4 wave length wire antenna

Reference Deviation ±5 kHz ±5 kHz ±5 kHz (94 dB SPL*1, 1 kHz)

Frequency Response 70 to 15,000 Hz 100 to 13,000 Hz 50 to 15,000 Hz
Signal-to-noise Ratio 60 dB (A-weighted) 60 dB (A-weighted) More than 60 dB (A-weighted)
Attenuator Adjustment Range (PAD) 12 dB, variable in 3 dB steps 21 dB, variable in 3 dB steps 21 dB, variable in 3 dB steps
Max. Input Sound Pressure Level 142 dB SPL (w/12 dB attenuator) 151 dB SPL (w/21 dB attenuator) 151 dB SPL (at 1 kHz)
(0 dB SPL=2 x 10-5 Pa.)
Max. Input Level — — —
(0 dBV=1 Vr.m.s.)
Reference Input Level — — —
(0 dBV=1 Vr.m.s.)
Input Connector — — —

Microphone Capsule Electret condenser Dynamic Dynamic

Directivity Uni-directional Uni-directional Uni-directional
Operating Voltage DC 3 V, AA-size (LR6) alkaline battery (× 2) DC 3 V, AA-size (LR6) alkaline battery (× 2) DC 1.5 V, AA-sized (LR6) alkaline battery (× 1)
Power Consumption 170 mA 170 mA 170 mA
Battery Life Approx. 8 hours w/(LR6) Approx. 8 hours w/(LR6) Approx. 5 hours w/ (LR6)
AA-size alkaline battery (× 2) AA-size alkaline battery (× 2) AA-size alkaline battery (× 1)
Dimensions (W × H × D) 48 mm dia. × 238 mm 48 mm dia. × 238 mm 51 mm × 238 mm
(1 15⁄16 inches dia. × 9 3⁄8 inches) (1 15⁄16 inches dia. × 9 3⁄8 inches) (2 1⁄8 × 9 3⁄8 inches)
Mass 300 g (10.5 oz) w/batteries 300 g (10.5 oz) w/batteries 440 g (15.5 oz) w/battery
Supplied Accessories Microphone holder (PF1⁄2-inch thread, × 1) Microphone holder (PF1⁄2-inch thread, × 1) Microphone holder (PF1⁄2-inch thread, × 1)
U: Stand screw adaptor (PF1⁄2 to NS5⁄8, × 1) U: Stand screw adaptor (PF1⁄2 to NS5⁄8, × 1) U: Stand screw adaptor (PF1⁄2 to NS5⁄8, × 1)
AU: Stand screw adaptor (PF1⁄2 to NS5⁄8, × 1), AU: Stand screw adaptor (PF1⁄2 to NS5⁄8, × 1), AU, CE: Stand screw adaptor (PF1⁄2 to W3⁄8, × 1)
Stand screw adaptor (PF1⁄2 to W3/8, × 1) Stand screw adaptor (PF1⁄2 to W3⁄8, × 1) Channel color seal (CE, x 1)

WRT-822A WRT-805A WRT-808A

Oscillator Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer
Type of Emission 110KF3E 110KF3E 110KF3E
RF Power Output 10 mW 10 mW (50 Ω load) 50 mW or 100 mW selectable
Antenna 1⁄4 wave length whip antenna 1⁄4 wave length wire antenna Internal antenna
Reference Deviation ±5 kHz (-60 dBV*2, 1 kHz input) ±5 kHz (-60 dBV*2, 1 kHz Input)*3 ±5 kHz (-60 dBV*2, 1 kHz Input)*3
Frequency Response 70 to 15,000 Hz 70 to 15,000 Hz 70 to 15,000 Hz
Signal-to-noise Ratio 60 dB (A-weighted) 57 dB (A-weighted) More than 57 dB (A-weighted)
Attenuator Adjustment Range (PAD) 0 to 21 dB, variable in 3 dB steps 21 dB, variable in 3 dB steps 0 to 50 dB, continuous
Max. Input Sound Pressure Level — — —
(0 dB SPL=2 × 10-5 Pa.)
Max. Input Level +7 dBV +17 dBV (-40 dBV position, attenuator 21 dB) 26 dBV*2, *4
(0 dBV=1 Vr.m.s.)
Reference Input Level -60 dBV (at attenuator 0 dB) -40 dBV (±16 kHz deviation at 1 kHz modulation)*5 —
(0 dBV=1 Vr.m.s.) -60dBV (±5 kHz deviation at 1 kHz modulation)*5
Input Connector SMC9-4S 3.5 mm (5/32 inch) dia. 3-pole XLR-3-11 type
mini phone jack with lock mechanism
Microphone Capsule — — —
Directivity — — —
Operating Voltage — DC 1.5 V, AA-size (LR6) alkaline battery (× 1) 3 V, AA-size (LR6) alkaline battery (× 2)
EQUIPMENT

Power Consumption 175 mA 170 mA 170 mA

AUDIO

Battery Life Approx. 8 hours w/(LR6) Approx. 6 hours w/(LR6) Approx. 4 hours w/(LR6)
AA-size alkaline battery (× 2) AA-size alkaline battery (× 1) AA-size alkaline battery (× 2)
Dimensions (W × H × D) 63 × 103 × 17 mm 58 × 93 × 21 mm 40 × 40 × 108 mm
(2 1⁄2 × 4 1⁄8 × 11⁄16 inches) (2 3⁄8 × 3 3⁄4 × 27⁄32 inches) (1 5⁄8 × 1 5⁄8 × 4 3⁄8 inches)
Mass 145 g (5.1 oz) w/batteries 100 g (3.5 oz) w/battery 175 g (6.18 oz) w/battery
Supplied Accessories Soft case (× 1) Channel color seal (× 1, CE) Soft case with a belt clip (× 1)

*1 0 dB SPL=2 x 10-5 Pa.

*2 0 dBV=1 Vr.m.s.
*3 Attenuator level: -60 dB position
*4 Attenuator level: -10 dB position
*5 Input level switch: -60 dBV position at attenuator 0 dB

For specifications of lavalier microphones, please refer to page 299.

–309–
 4 UHF Synthesized Wireless Microphone System

WRR-802A
UHF Synthesized Diversity Tuner
•Single-channel Space Diversity Tuner •Half 19-inch rack
width and 1U height •AF, RF, and battery alarm indication by
both LED and LCD to double check operating condition
(channel indication by LCD only) •Output volume control
•Supplied portable front-mounted passive antennas
•Two types of output connectors
- TRS Phone Balanced connector (6.3 mm dia.), -20 dBm
for LINE
- XLR connector, -58 dBm for MIC or -20 dBm for LINE

MB-806A
Tuner Base Unit
•Modular design, 1U height 19-inch rack •Accommodates up
to six WRU-806A for up to six simultaneous channels of
operation •Up to 11 simultaneous channels on a single pair
of AN-820A Active Antennas with the optional WD-820A
Antenna Divider •Up to 19 simultaneous channels on a single
pair of AN-820A Active Antennas with the optional WD-820A
Antenna Divider •XLR output connectors for each tuner and
mix output •Selectable output level, -58 dBm for MIC or -20
dBm for LINE •Space Diversity Reception for dependable RF
reception •AF, RF, and battery alarm indication by both LED w/optional WRU-806A UHF Synthesized Tuner Unit installed
and LCD to double check operating condition (channel
indication by LCD only) •Auto channel assignment of
additional receiver modules for instant programming of
interference-free multi-channel operation •RF input
attenuator (10 dB/0 dB) switch •Supplied passive antennas
for rear mounting (with provision for front mounting)
EQUIPMENT
AUDIO

WRU-806A
UHF Synthesized Tuner Unit
•Dedicated plug-in diversity receiver module for MB-806A
•Space Diversity Reception for dependable RF reception

–310–
4 UHF Synthesized Wireless Microphone System

WRR-805A
UHF Synthesized Portable Tuner
•Compact, lightweight portable tuner for a wide variety of
camcorders that have a stereo mini jack •Flexible mounting
position and direction for secure operation •RF, battery alarm
indication by both LED and LCD to double check operating
condition (AF and channel indication by LCD only) •LCD for
display of operating channel, AF, RF, accumulated operating
hours, the tuner’s battery status •LED for RF condition, the
transmitter’s battery alarm indication •Convenient headphone
monitoring with volume control •3-pole mini jack with a lock
mechanism for secure camera cable clamping •Up to 6 hours
of continuous operation with two AA-size (LR6) alkaline
batteries •RF Muting function

WRR-810A
UHF Synthesized Tuner
•Compact, lightweight and easy to mount on Betacam SP
camcorders •Approx. 6 hours of continuous operation by
2 AA-size (LR6) alkaline batteries •The battery status can be
shown on the built-in LCD. •AF monitoring function
•Switchable muting RF level 15 dBµ

WRR-855A
UHF Synthesized Diversity Tuner
•Slot-in type portable tuner designed for use with Sony
Betacam SX camcorders •Water proof structure
•Compact design and lightweight only 280 g (11 oz) •Space
diversity system for highly stable signal reception •Pre-
programmed, intermodulation-free, groups of frequencies
stored in CPU for simultaneous multi-channel operation
•Tone-squelch circuit for noise elimination •LED indications of
received RF signal level and audio output
•LCD shows
– wireless microphone operating channel and group
– error messages
•Powered from camcorder
– direct interfacing with Sony Betacam SX camcorders
EQUIPMENT
AUDIO

– via optional mounting adaptor (BTA-801) with other Sony

camcorders
•Muting RF level 10 dBµ or OFF switchable

–311–
 4 UHF Synthesized Wireless Microphone System

BTA-801
Portable Tuner Mount Adaptor
•Mounting adaptor for a WRR-855A to fit on a Sony
camcorder •Provides DC power supply from a camcorder to
the WRR-855A by incorporating a DC-DC converter

CA-WRR855
Camera Adaptor
•Mounting adaptor that enables a WRR-855A to be mounted
on Sony DSR-300/500WS DVCAM™ camcorders
•Direct audio/power connection interfaces

DC-WL800
DC Pack Unit
•The DC-WL800 can be used to power a WRR-810A
Portable Receiver, the attached power cable of this DC pack
making it very convenient to mount the receiver onto any
Betacam camcorder •As an alternative to operating a
WRT-860A, or WRT-822A, on batteries, the battery case can
be removed and replaced by a DC-WL800 DC Pack which
then allows operation from an external DC 12 V source
EQUIPMENT
AUDIO

–312–
4 UHF Synthesized Wireless Microphone System
Specifications

WRR-802A MB-806A WRU-806A

Oscillator Crystal controlled PLL synthesizer — Crystal controlled PLL synthesizer
Type of Reception 110KF3E — 110KF3E
Reference Deviation ±5 kHz — ±5 kHz
Selectivity More than 60 dB — More than 60 dB
Spurious Rejection Ratio More than 70 dB — More than 70 dB
Frequency Range 100 to 15,000 Hz — 100 to 15,000 Hz
Signal-to-noise Ratio More than 60 dB (A-weighted) — More than 60 dB (A-weighted)

Harmonic Distortion Less than 1.0% — Less than 1.0%

RF Muting Level 30 dBµ — 30 dBµ
Audio Output Level -20 dBm/-58 dBm (±5 kHz deviation -20 dBm/-58 dBm (±5 kHz deviation —
at 1 kHz modulation) at 1 kHz modulation)
Audio Output Connector XLR and TRS phone, 6.3 mm XLR type —
(1/4 inch) dia., balanced
Antenna Connector BNC-R type BNC-R type —
Headphone Output Connector — — —

Power Requirements — U: AC 120V, 60 Hz —

CE: AC 230 V, 50 Hz
Power Consumption — 30 W —
Operating Voltage DC 9 V — DC 9 V
Current Consumption 600 mA — 225 mA
Battery Life — — —
Dimensions 218 × 44 × 210 mm 482 × 44 × 300 mm 57 × 26 × 122 mm
(W × H × D) (8 5⁄8 × 1 3⁄4 × 8 3⁄8 inches) (19 × 1 3⁄4 × 11 7⁄8 inches) (2 1⁄4 × 1 1⁄16 × 4 7⁄8 inches)
Mass 1.6 kg (3 Ib 8 oz) 3.6 kg (7 Ib 15 oz) 160 g (5.7 oz)
Supplied Accessories AC power adaptor (× 1) AC power cord (× 1) Channel color seal (CE, × 1)
Antenna (× 2) Antenna (× 2)
Channel color seal (CE, × 1)

WRR-805A WRR-810A WRR-855A

Oscillator Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer Crystal controlled PLL synthesizer
Type of Reception 110KF3E 110KF3E 110KF3E
Reference Deviation ±5 kHz ±5 kHz ±5 kHz
Selectivity More than 60 dB More than 60 dB More than 60 dB
Spurious Rejection Ratio More than 70 dB More than 50 dB More than 80 dB
Frequency Range 100 to 15,000 Hz 100 to 15,000 Hz 100 to 15,000 Hz
Signal-to-noise Ratio More than 30 dB More than 60 dB (A-weighted) More than 60 dB (A-weighted)
(A-weighted RF input: 10 dBµ)
More than 60 dB
(A-weighted RF input: 60 dBµ)
Harmonic Distortion Less than 1.0% Less than 1.0% Less than 1.0%
RF Muting Level 15 dBµ ±5 dBµ 15 dBµ 15 dBµ or OFF selectable
Audio Output Level -58 dBm (±5 kHz deviation -58 dBm -40 dBm
at 1 kHz modulation)
Audio Output Connector 3.5 mm (5/32 inch) dia. 3-pole mini phone SMC9-4S D-sub 15-pin
jack with lock mechanism, balanced
Antenna Connector — BNC-R type BNC-R type
Headphone Output Connector 3.5 mm (5/32 inch) dia. 3-pole mini — —
EQUIPMENT

phone jack
AUDIO

Power Requirements — — —

Power Consumption — — —
Operating Voltage DC 3 V, AA-size (LR6) alkaline battery (× 2) DC 3 V, AA-size (LR6) alkaline battery (× 2) DC 7 V
Current Consumption 170 mA 200 mA 180 mA
Battery Life Approx. 6 hours w/(LR6) AA-size alkaline battery (× 2) Approx. 6 hours w/(LR6) AA-size alkaline battery (× 2) —
Dimensions 44 × 121 × 24 mm 63 × 120 × 17 mm 88 × 119 × 31 mm
(W × H × D) (1 3⁄4 × 4 7⁄8 × 31⁄32 inches) (2 1⁄2 × 4 3⁄4 × 11⁄16 inches) (3 1⁄2 × 4 3⁄4 × 11⁄16 inches)
Mass 140 g(4.9 oz) w/battery 220 g (7 oz) w/battery 280 g(9.9 oz)
Supplied Accessories Attachment case with a belt clip (× 1) 1/4 wave length antenna (× 2) 1/4 wave length antenna (× 2)
Output cable (× 1) Output cable (× 2)
Holder kit for Betacam camcorder (× 1)
0 dBµ = 1µV; 0 dBm = 0.775 Vr.m.s. 600 Ω load; 0 dBµ = 0.775 Vr.m.s open

DC-WL800
Input DC Power 10 V to 17 V
Output DC Power 3V
Load Current 250 mA
Mass 50 g (1.8 oz)

–313–
 4 UHF Synthesized Wireless Microphone System

AN-820A
UHF Antenna
•Built-in RF amplifier •Easy installation on a wall or in a
microphone stand with the supplied stand adaptor •LED
indication for installation check •External power supply
provided from the WRR-801A/820A/840A or the WD-820A
via coaxial cable

WD-820A
UHF Antenna Divider
•Connection of up to 4 diversity distribution outputs •Cascade
connections •Connection of up to 2 pair antennas •DC 9 V
power supply for the AN-820A UHF antenna

Specifications
WD-820A
Channel Distribution 2 inputs/4 outputs (x 2)
Input/Output VSWR Less than 3.0
Input/Output Impedance 50 Ω
Cascade Output 1 output (x 2)
Power Supply for Antenna Booster DC 9 V
(supplied from antenna input connectors)
Power Consumption 6 W +outlet 300 W max.
Dimensions 482 (W) x 44 (H) x 300 (D) mm
(19 x 1 3/4 x 11 7/8 inches)
Mass 4.2 kg (9 lb 4 oz)
Supplied Accessories AC power cord (x 1)
50 Ω BNC terminators (x 6)

K-1236
UHF Antenna
EQUIPMENT
AUDIO

K-1237
UHF Antenna Booster Unit
•Two way powering of 2 AA-size (LR-6) alkaline batteries
which provide approx. 6 hours of continuous operation or
external DC 10 V to 17 V

–314–
4 UHF Synthesized Wireless Microphone System

EC-1.5CF
Microphone cable for WRT-822A
•Connectors: SMC9-4P, XLR-3-11C type
•Length: 1.5 m (4.9 feet)

K-1161
Microphone cables for connection between
AN-820A, WRR-820A/840A and WD-820A
•Connectors: SMC9-4P, Phone
•Length: 0.7 m

GC-0.7MP
Guitar Cable
•Designed for use with WRT-805A UHF Synthesized
Transmitter •6.3 mm dia. (1/4 inch dia.) 2-pole phone jack to
3.5 mm dia. (5/32 inch dia.) 3-pole mini phone plug with lock
mechanism •Cable 5.5 mm dia. x 700 mm (7⁄32 inch dia. x 27
5⁄8 inches)

SC-M800
Carrying Case
•Compact and lightweight •Portability-enables a complete
Freedom Series Wireless Microphone System to be easily
and safely carried around
•Capacity to hold:
• WRT-800A UHF Synthesized Wireless Handheld
Microphone (1)
EQUIPMENT
AUDIO

• WRT-805A UHF Synthesized Body Pack Transmitter (1)

• WRR-800A UHF Synthesized Diversity Tuner (1) with AC
adaptor (1)
• Lavalier microphones
• GC-0.7MP Guitar Cable (1)
• Microphone holder (1) Specification
• AA size batteries (max. 3) Dimensions: 460 (W) × 390 (H) × 90 (H) mm
• Antennas (2) for the WRR-800A UHF Synthesized (18 1⁄8 × 15 3⁄8 × 3 5⁄8 inches)
Mass: 1.4 kg (3 lb 1.4 oz)
Diversity Tuner Supplied Accessories: “Freedom” logo sticker (× 1)
• Unallocated space : 95 (W) × 25 (H) × 40 (D) mm Packaging diagram (× 1)
(3 3⁄4 × 1 × 1 5⁄8 inches)
• Operating instructions (1) can be inserted between the
inside of the case lid and the internal cushion
•Robust external polypropylene frame •Internal urethane
cushions minimize external shocks and vibration

–315–
 4 UHF Synthesized Wireless Microphone System

LCS-T805
Soft Case
•Designed specifically to attach a WRT-805A UHF
Synthesized Body Pack Transmitter to a guitar strap •Fixes a
guitar strap with width of 15 mm (19/32 inch) to 70 mm (2 7/8
inches) (A convenient strap holder is included to allow
attachment to a guitar strap with width less than 50 mm (2
inches))

Specification
Dimensions: 75 (W) × 110 (H) × 40 (D) mm
(3 × 4 3/8 × 1 5/8 inches)
Mass: 50 g (1.76 oz)
Supplied Accessory: Operating instructions (× 1)

WBC Coaxial Cables

50 Ω coaxial cables with BNC connectors
Model Length Connector Cable Loss (dB) Mass
(m) (x 2) (50 Ω) 500 MHz 1000 MHz (g)
BNC-P — —
WBC-0.6B-P 0.6 RG-58 A/U 70
(UG-88/U)
WBC-10B-5P 10 BNC-P-5 5D-2 V 2.2 3.5 800
WBC-20B-5P 20 BNC-P-5 5D-2 V 4.4 7.0 1600
WBC-30B-5P 30 BNC-P-5 5D-2 V 6.6 10.5 2400
WBC-50B-5P 50 BNC-P-5 5D-2 V 11.0 17.5 4000
EQUIPMENT
AUDIO

–316–
SECTION 10 OTHER VIDEO EQUIPMENT AND ACCESSORIES
1. Peripheral Equipment ............................................318

2. Batteries and Chargers ..........................................323

3. AC Adaptor..............................................................328

4. System Consols......................................................331

5. Connecting Cables .................................................332

6. Videocassette Tape
6-1. Betacam SP Videocassette Tapes......................337
6-2. DVCAM Videocassette Tapes.............................338
6-3. S-VHS Videocassette Tapes...............................340

7. Memory Stick™.......................................................341

EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–317–
 1. Peripheral Equipment
VCS-1000
Video Selector
•For use in combination with the SVRM-960 Bi-directional
remote controller for high quality picture monitoing
•Minimizes the signal reflections caused by long cable runs
•Up to 20 SVO-965P units equipped with the SVBK-902
optional Bi-directional interface board can be connected to a
single VCS-1000 •Loop-through output is provided for
connection of up to 50 VCS-1000 units •19-inch EIA rack
mountable in various directions •On-Line indicator •When
the power is turned off, the LINE OUT becomes a loop-
through output of the LINE IN for easy maintenance
Supplied accessories: Mounting brackets (EIA 2U width × 2, DIA 3U width × 2)
AC power cord
Operation manual

Specifications
General
Mass: Approx. 4kg (8 lb 13 oz)
Dimensions: 424(W) × 88(H) × 132(D)mm
(163/4 × 31/2 × 51/4 inches)
Power requirements: AC 220 to 240V, 50/ 60Hz
Power consumption: 8.5W max.
Maximum number of VTR connection:
20 units

Video
Video signal system: EIA/CCIR monochrome, NTSC/PAL colour
Frequency response: 6MHz, 100kHz reference
S/N ratio: More than 54dB

Audio
Frequency response: 20Hz to 20kHz, 1kHz -10dBu standard
S/N ratio: More than 85dB

RF video
Frequency response: 6MHz
S/N ratio: More than 54dB

Video inputs/outputs
Video in (from SVO-965P):
BNC (×20), 1Vp-p, sync negative, 37.5Ω, unbalanced
Line in video (from previous VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω unbalanced
Line out video (to SVRM-960 or next VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω unbalanced

Control inputs/outputs
Control input (from SVO-965P): BNC (×20)
Rx*1 input: 1Vp-p, 37.5Ω unbalanced
Tx*2 output: 1.4Vp-p, 37.5Ω unbalanced
Line in control (from previous VCS-1000):
BNC,
Tx intput: 1Vp-p, 37.5Ω, unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced
Line out control (to SVRM-960 or next VCS-1000):
BNC,
Tx input: 1Vp-p, 37.5Ω unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced

RF
RF IN (from the SVO-965P):
BNC (×20), 1Vp-p, 37.5Ω, unbalanced
Line IN RF (from previous VCS-1000):
BNC, 1Vp-p, 75Ω, unbalanced
EQUIPMENT AND
ACCESSORIES

Line Out RF (to SVRM-960 or next VCS-1000):

OTHER VIDEO

BNC, 1Vp-p, 75Ω unbalanced

Audio inputs/outputs
Audio Input (from SVO-965P):
Phono (2-channel × 20), high impedance, unbalanced
Line In audio (from previous VCS-1000):
Phono (2-channel), high impedance, unbalanced
Line Out audio (to SVRM-960 or next VCS-1000):
Phono (2-channel), high impedance, unbalanced

*1: Rx: Signal output from the SVRM-960

*2: Tx: Signal output from the SVO-965P

–318–
1. Peripheral Equipment
SVCS-63A Dimensions:
Approx. 424(W) × 44(H) × 170(D)mm
Video and Audio Selector (163/4 × 13/4 × 63/4 inches)
•A video and audio (stereo) signal can Mass: Approx. 3kg (6 lb 10 oz)
Connectors: VIDEO IN/OUT—BNC type
be selected from the six video and AUDIO IN/OUT—PHONO
audio sources. Supplied accessories:
•Equipped with the loop-through out Rack mount adaptor × 2
Screw for rack mounting × 4
connectors for each input signal.
•When two or more selectors are
connected in parallel, using the loop-
through capability, a camera or VTR
signal can be selected
independently.
•Can be mounted into a 19-inch EIA
standard rack using the supplied rack
mount adaptor.

IN - 1 IN - 2 IN - 3 IN - 4 IN - 5 IN - 6 OUT IN - 2 IN - 4 IN - 6
IN - 1 IN - 3 IN - 5 OUT
ON ON ON ON ON ON
L
75Ω 75Ω 75Ω 75Ω 75Ω 75Ω

OFF OFF OFF OFF OFF OFF R

Outputs 1, 2
SRP-12DAR Connector: BNC
RGB Distribution Unit RGB level: 0.7 Vp-p
•Provides AV applications including PC cost Hs/Cs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
effective and high performance analog RGB Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
distribution •One analog RGB signal is
Monitor out
distributed into two signals and monitor
Connector: D-sub 15p
signal(total three) •Monitor signal is routed RGB level: 0.7 Vp-p
through the D-sub 15p connector to monitor Hs/Cs level: 1 Vp-p /75 Ω, 4 Vp-p/high
display •Wide frequency response of up to impedance
250 MHz(BNC output) •Compact and Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
durable enclosure is available
Electoric characteristics
Inputs RGB bandwidth
Connector: BNC Output 1, 2: 40 Hz to 250 MHz+3/-3 dB
RGB level: 0.7 Vp-p Monitor out: 40 Hz to 200 MHz+3/-3 dB
RGB impedance: Gain difference between RGBs:
75 Ω 0.2 dB
Hs/Cs level: 1 V-4 Vp-p Delay between RGBs:
Hs/Cs impedance: Less than 1 ns
47 kΩ (High impedance)
Hs/Cs sync: Positive/negative General
Vs level: 1 V-4 Vp-p Power requirements: Power plug converter for
Vs impedance: 120 V
47 kΩ (High impedance) Power consumption: 4W

Video Max. level: +10dBu

SRP-200DA Frequency responce: Impedance: 47Ω
AV Distribution Amplifier 100 kHz to 10 MHz, -0.5dB Type: Phono jack
•Can distribute an AV input signal in DG: Less than 0.5% Circuit: Unbalanced
DP: Less than 0.4°
five ways •The 75Ω terminator of the Input: 75Ω/high impedance
video input is automatically (high impedance at stacking output)
disconnected when a cable is connected BNC connector x1
Outputs: 75Ω, BNC connector ×5
to the stacking terminal. Up to four (high impedance at stacking output)
units can be connected in parallel Audio
•Can be mounted into a 19-inch EIA Frequency response:
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

standard rack 20Hz to 20kHz

Harmonic distortion:
General Less than 0.005%
Dimensions: 482(W) × 44(H) × 175(D)mm Inputs (one stereo)
(19 × 13/4 × 7 inches) Reference level:
Mass: 2.5kg (5 lb 8 oz) -10dBu
Power requirements: Max. level: +10dBu
AC 120V, 230V, 50Hz/60Hz Impedance: 47kΩ
Power consumption: Type: Phono jack
5W Circuit: Unbalanced
Operating temperature: Outputs (five stereo)
0 to 40°C (32 to 104°F) Reference level:
Storage temperature: -10dBu
-20 to +60°C (-4 to +140°F)

–319–
 1. Peripheral Equipment
Sync—3V ±1Vp-p, 75Ω,
VCS-500 unbalanced, negative
Video and audio switcher with Audio—LINE OUT CH-1/CH-2,
rated input ±2dB, 47kΩ
blanking switch facility Frequency response:
•The system using the VCS-500 can operate
Video ±1dB (up to 6MHz)
synchronically with the external sync or the Audio 50 to 15,000Hz ±1dB
video signal connected to the VIDEO IN-1 Connectors:VIDEO IN/OUT—BNC
connector. The signal can be switched in SYNC IN/OUT—BNC
the blanking portion so that switching noise AUDIO IN/OUT—Phono
is eliminated REMOTE IN/OUT—20-pin
•Up to five video and audio signals can be DUB IN/OUT—7-pin
controlled Power requirements:
•Remote control is possible when an RM- AC 100/110/120/127/220/240V
V5 VTR selector is used ±10% (selectable), 50/60Hz
•DUB circuit switching function Power consumption:
•Can be mounted into 19-inch EIA 20W
standard rack Dimensions:480(W) × 87(H) × 280(D)mm
(19 × 31/2 × 111/8 inches)
Inputs: Video—1Vp-p of rating, 75Ω, Mass: 7kg (15 lb 7 oz)
unbalanced, sync negative Supplied accessories:
Sync—3V ±1Vp-p, 75Ω, AC power cord
unbalanced, negative Screw for rack mounting SYNC OUT SYNC OUT SYNC OUT SYNC OUT SYNC OUT SYNC OUT
SYNC IN
IN - 5 IN - 4 IN - 3 IN - 2 IN - 1 OUT
Audio—LINE IN CH-1/CH-2, GROUP
SELECT VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO
IN OUT CH1/L CH1/L CH1/L CH1/L CH1/L CH1/L

-5dB of rating, 47kΩ LINE LINE LINE DUB LINE DUB LINE DUB LINE

Outputs: Video—Rated input ±0.2Vp-p, CH2/R CH2/R CH2/R CH2/R CH2/R CH2/R
≥ AC IN

75Ω, unbalanced, sync negative REMOTE

General
DA-1400 Mass: 6kg (13 lb 23 oz)
Video/audio distributor Dimensions: 424(W) × 88(H) × 350(D)mm
•Two video/audio inputs and fourteen (163/4 × 31/2 × 137/8 inches)
distribution outputs •Four distribution Power requirements:
patterns are available: Input signal A (1 to AC 220 to 240V, 50/60Hz
Power consumption:
14 ch), Input signal B (1 to 14 ch), Input
16W
signal A (1 to 7 ch)/Input signal B (8 to 14 Video
ch), Input signal B (1 to 7 ch)/Input signal A Inputs: Loop-through, BNC (×2), 1Vp-p,
(8 to 14 ch) •Loop-through output 75Ω, sync negative
connector for each input signal to expand Outputs: BNC (×14), 1Vp-p, 75Ω, sync negative
the connection with other DA-1400s S/N ratio: Better than 60dB
•Video/audio level meters for adjusting and Frequency response:
confirming the output signal levels •Audio 10MHz ± 1dB
Audio
input level selector (-10dB/-6dB) •19-inch
Inputs: Loop-through, Phono (2-channel) (×2)
EIA standard rack mountable Input level: –10dBu/–6dBu
switchable, 50kΩ
Supplied accessories:
Outputs: Phono (2-channel) (×14)
AC power cord
Output level: –10dBu/–6dBu,
Mounting brackets
100Ω
(EIA 2U width: 1 pair)
S/N ratio: Better than 70dB at 600Ω
Operation manual
Frequency response:
20Hz to 20kHz ±1dB
Distortion: Less than 0.1%, -10dBu at 1kHz

AUDIO IN/OUT, DIRECT OUT—Phono

DA-500 Power requirements:
Colour and monochrome AC 100/110/120/127/220/240V
±10% (selectable), 50/60Hz
video/audio distributor with DUB Power consumption:
connectors 20W
•Five Video/DUB/Audio outputs and one Dimensions: 480(W) × 87(H) × 280(D)mm
direct output (19 × 31/2 × 111/8 inches)
•DUB connectors are furnished so that a Mass: 6.1kg (13 lb 7 oz)
high quality video signal will be obtained Supplied accessories:
AC power cord
•Up to four DA-500s can be connected in
Screw for rack mounting
EQUIPMENT AND

series so that the input signal can be divided

ACCESSORIES
OTHER VIDEO

into as many as 20 separate signals

•Can be mounted into 19-inch EIA
standard rack

Inputs: Video—1Vp-p of rating, 75Ω,

unbalanced, sync negative
Audio—LINE CH-1/CH-2, -5dB
of rating, 47kΩ, unbalanced
Outputs: Video—OUT 1 to 5, Rated input
±0.2Vp-p, 75Ω, unbalanced, OUT - 5 OUT - 4 OUT - 3 OUT - 2 OUT - 1 DIRECT-OUT OUT

sync negative VIDEO

CH1/L
VIDEO
CH1/L
VIDEO
CH1/L
VIDEO
CH1/L
VIDEO
CH1/L
VIDEO
CH1/L
VIDEO
CH1/L

Audio—LINE CH-1/CH-2, Rated DUB LINE DUB LINE DUB LINE DUB LINE DUB LINE DUB LINE DUB LINE

input ±2dB, 47kΩ CH2/R CH2/R CH2/R CH2/R CH2/R CH2/R CH2/R

≥ AC IN

Connectors: VIDEO IN/OUT, DIRECT OUT—BNC

–320–
1. Peripheral Equipment
SCST-1000SP Input signal: SECAM colour composite
1Vp-p, 75Ω switchable of high
SECAM-PAL transcoder impedance for loop-through
•Converts SECAM colour signal to PAL Output signal:
colour signal PAL colour composite, 1Vp-p, 75Ω
Signal conversion method:
Decode/encode
Input/Output connector:
BNC
Power requirements:
AC 220V ±10%, 50/60Hz
Power consumption:
15VA
Operating temperature:
0 to 45°C (32 to 113°F)
Dimensions: 424(W) × 44(H) × 250(D)mm
(163/4 × 13/4 × 97/8 inches)
Mass: 4kg (8 lb 13 oz)
Supplied accessories:
AC power cord (×1)
Fuse (315mAT) (×1)
Rack mount metals (×1 set)

PAL SECAM
VIDEO OUT VIDEO OUT VIDEO IN AC IN
F US E

Video input: 1.0Vp-p to 1.4Vp-p 75Ω,

VA-200E unbalanced
Cable compensator for stable Video output: 1Vp-p, 75Ω, unbalanced
Frequency response:
colour/monochrome video Flat to 4.5MHz ±2dB
transmission Operating temperature:
•Compensates for the attenuation caused 0 to 40°C (32 to 104°F)
by long-distance transmission of Connectors: VIDEO IN/OUT—UHF (M-type)
colour/monochrome video signals with a Power requirements:
coaxial cable AC 110 to 130/220 to 240V
selectable, 50/60Hz
•Especially effective for the transmission of
Power consumption:
colour video signals 6W
Dimensions: 214(W) × 75(H) × 171(D)mm
Length adjustments (81/2 × 3 × 63/4 inches)
3C-2V 5C-2V 7C-2V 10C-2V Mass: 1.4kg (3 lb 4 oz)
1 180m 300m 370m 500m Supplied accessory:
AC power cord
2 360m 600m 750m 1000m
3 540m 900m 1100m 1500m
4 720m 1200m 1500m 2000m

Load impedance: More than 10 kΩ

PVS-1680S Frequency response: 20 Hz to 20 kHz,
Matrix Switcher +0.1 dB/ -0.5 dB
•Sixteen inputs and eight outputs matrix T.H.D.: Less than 0.005%
functions •RS-232C interface port for Video (Composite)
remote control from a PC •Reference video Input and output connector:
BNC
input and roop-through output •Memory
S-Video
function up to 50-scene •Equipped with a Input and output connector:
LOCK SWITCH to prevent inadvertent 4-pin mini DIN
operation •4U high, mountable in 19-inch Number of input and output:
standard rack 4*
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

*Interlocked with channels to 1 to 4 of composite input

Supplied accessory: Power cable (1) Input and output impedance:
75 Ω
Audio Frequency response: 50 Hz to 10 MHz
Input and output connector: General
Phono Power requirements: AC 230 V, 50/60 Hz
Number of input ch: 16 (stereo) Power consumption: 25 W
Impedance: 47 kΩ Operating temperature:
Reference(Max.) input level: 0 to 40°C (32 to 10°F)
-10 dBu (+16 dBu) Storage temperature: -20 to 60°C (-4 to 140°F)
Input impedance: 47 kΩ Mass: 13 kg( 22 lb 1 oz )
Number of output ch: 8 (stereo) Dimensions: 482 (W) × 176 (H) × 350 (D)mm
Impedance: 470 Ω (19 × 7 × 137⁄8 inches)
Reference(Max.) output level:
-10 dBu (+16 dBu)
Output impedance: 470 Ω

–321–
 1. Peripheral Equipment
Output impedance: 470 Ω Operating temperature:
PVS-1240S Load impedance: More than 10 kΩ 0 to 40°C (32 to 10°F)
Matrix Switcher Frequency response: 20 Hz to 20 kHz, Storage temperature: -20 to 60°C (-4 to 140°F)
•Twelve inputs and four outputs matrix +0 dB/ -0.5 dB Mass: 10 kg (22 lb 1 oz)
functions •RS-232C interface port for T.H.D.: Less than 0.002% Dimensions: 482 (W) × 176 (H) × 350 (D)mm
remote control from a PC •Reference video Video (Composite) (19 × 14 × 13 7⁄8 inches)
Inputs and output connector:
input and loop-through output •Memory
BNC
function up to 50-scene •Equipped with a Number of input ch: 12
LOCK SWITCH to prevent inadvertent Number of output ch: 4
operation •4U high, mountable in 19-inch Input and output impedance:
standard rack 75 Ω
Frequency response: 50 Hz to 10 MHz,
Supplied accessories: Power cable (1), +0.8 dB / -0.5 dB
Plug adaptor (1) DG: Less than 0.5%
DP: Less than 0.5°
Audio S-Video
Inputs and output connector: Input and output connector:
Phono 4-pin mini DIN
Number of input ch: 12 (stereo) Number of input and output ch :
Impedance: 47 kΩ 4*
Reference(Max.) input level: *Interlocked with ch1 to 4 of composite input
-10 dBu (+16 dBu) Input and output impedance:
Input impedance: 47 kΩ 75 Ω
Number of output ch: 4 (stereo) Frequency response: 50 Hz to 10 MHz
Impedance: 470 Ω General
Reference(Max.) output level: Power requirements: AC 120/230 V, 50/60 Hz
-10 dBu (+16 dBu) Power consumption: 18 W

Video General
PVS-880S Composite Power requirements: AC 120–230V, 50/60Hz
Matrix Switcher Inputs: Type: BNC Power consumption: 17W
•Eight inputs and eight outputs matrix Number of channels: eight Operating temperature: 0 to 40°C (32 to 104°F)
functions •RS-232C interface port for Impedance: 75Ω Storage temperature: –20 to 60°C (–4 to 140°F)
remote control from a personal computer Outputs: Type: BNC Mass: 10kg (22 lb 1 oz)
Number of channels: eight Dimensions: 482(W) × 132(H) × 350(D)mm
•Reference video input •Memory function
Impedance: 75Ω (19 × 51/4 × 137/8 inches)
•Equipped with a LOCK SWITCH to prevent Reference video: Type: BNC
inadvertent operation •Can be mounted in a Number of inputs: two
19-inch EIA standard rack Impedance: 47kΩ
Supplied accessory: Power cable (1) Max. input level: 4Vp-p
Frequency response: 50kHz to 10MHz,
Audio +0.8/-0.5dB
Inputs: Type: Phono DG: Less than 0.5%
Number of channels: eight (stereo) DP: Less than 0.5°
Impedance: 47kΩ S-Video
Reference level: –10dBu Inputs: Type: 4-pin mini DIN
Max. input level: +16dBu Number of channels: four*
Outputs: Type: Phono *Interlocked with channels
Number of channels: eight (stereo) to 1to 4 of VIDEO IN (composite)
Impedance: 470Ω Impedance: 75Ω
Reference level: –10dBu Outputs: Type: 4-pin mini DIN
Max. output level: +16dBu Number of channels: four
Load impedance: More than 10kΩ Impedance: 75Ω
Frequency response: 20Hz to 20kHz, +0.1/–0.5dB Frequency response: 50kHz to 10MHz,
Total harmonic distortion: ±0.5dB *Except for North America
Less than 0.005%

Video General
PVS-820S Inputs: Type: BNC Power requirements: AC 120V–230V, 50/60Hz
Matrix Switcher Number of channels: eight Power consumption: 17W
•Eight inputs and two outputs matrix Impedance: 75Ω Operating temperature: 0 to 40°C (32 to 10°F)
functions •Reference video input •Equipped Outputs: Type: BNC Storage temperature: –20 to 60°C (–4 to 140°F)
with a LOCK SWITCH to prevent Number of channels: two Mass: 4kg (8 lb 13 oz)
Impedance: 75Ω Dimensions: 482(W) × 88(H) × 220(D)mm
inadvertent operation •Can be mounted in a
Reference video: Type: BNC (19 × 3 1/2 × 8 3/4 inches)
19-inch EIA standard rack Number of input: two
Impedance: 47Ω
Supplied accessory: Power cable (1)
Max. input level: 4Vp-p
Frequency response: 50kHz to 10MHz, +0.3/–1dB
EQUIPMENT AND

Audio
ACCESSORIES
OTHER VIDEO

DG: Less than 0.5%

Inputs: Type: Phono
DP: Less than 0.5°
Number of channels: eight (stereo)
S-Video
Impedance: 75Ω
Inputs: Type: 4-pin mini DIN
Reference level: –10dBu
Number of channels: 4*
Max. input level: +10dBu
*Interlocked with channels
Outputs: Type: Phono
to 1 to 4 of VIDEO IN
Number of channels: two (stereo)
(composite)
Impedance: 470Ω
Impedance: 75Ω
Reference level: –10dBu
Output: Type: 4-pin mini DIN
Max. output level: +10dBu
Number of channels: two
Load impedance: More than 10kΩ
Impedance: 75Ω
Frequency response: 20Hz to 20kHz, +0.1/–0.5dB
Frequency response: 50kHz to 10MHz,
Total harmonic distortion:
+0.3/-1dB
Less than 0.005% *Except for North America

–322–
2. Batteries and Chargers

BC-1WDCE
Battery charger for NP-1B
•Battery charger for the NP-1B battery pack
•Up to four NP-1B batteries can be charged
•Auto refresh function •Battery life indication
•Skips charging process for fully charged
batteries

Power requirements:
AC 220 to 240 V ±10%, 50/60 Hz
Power consumption:
51 W
Charging time: Approx. 90min
Dimensions: 107.5 (W) × 88 (H) × 325 (D)
mm
(41/4 × 31/2 × 127/8 inches)
Mass: Approx. 1.7 kg (3 lb 5 oz)

Supplied accessories:
BC-410CE AC power cord
Battery charger for BP-90A/NP-1B Operation/maintenance manual
•Battery charger for BP-90A and NP-1B
•Up to four BP-90As and four NP-1Bs can
be charged •Battery refreshing function
•Trickle charge to avoid self-discharge

Power requirements:
AC 220/240 V selectable, 50/60 Hz
Power consumption:
75 W
Charging time:
BP-90A: 160 min
NP-1B: 90 min
Dimensions:
212 (W) × 85 (H) × 325 (D) mm
(41/2 × 33/8 × 127/8 inches)
Mass: 4 kg (8 lb 13 oz)

Mass: 1.1 kg (2 lb 6 oz)

BC-L50 Dimensions (w/h/d):
Lithium-ion Battery Charger 60 × 191 × 130 mm
•Compact and mobile battery charger which (2 3⁄8 × 7 5⁄8 × 5 1⁄8 inches)
can be used with Lithium-ion battery packs (w/o projections)
•Up to two Lithium-ion batteries attached Charge system:
Constant voltage and current
•Use a unique new time-saving charging
charge system with timer stop
system for quick charges system
Charge control system:
Power requirements: Constant voltage and current
AC 220 V to 240 V, 50/60 Hz chargecontrol system
Output: DC 16.8 V, 2.2 A Booster charge current:
Power consumption: Approx. 2.2 A
Approx. 49 W
Operating temperature:
-5° C to 45° C (23° F to 113° F)
Storage temperature:
-20° C to 60° C (-4° F to 140° F)
Operating/storage humidity:
5 to 90 % RH

Dimensions: 330 (W) × 131 (H) × 144 (D) mm

BC-L100CE (13 × 51/4 × 53/4 inhes)
Battery charger for BP-L60A Mass: Approx. 2 kg (4 lb 7 oz)
BP-L90A/NP-1B/BP-90A
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

•Battery charger for BP-L60A/BP-L90A/

NP-1B/BP-90A batteries •Up to four BP-
L60A, BP-L90A, NP-1B or BP-90A can be
charged

Power requirements:
AC100 V to 240 V, 50/60 Hz
Power consumption:
110 W
Charging time:
BP-L60A: Approx. 2.5 hours
BP-L90A: Approx. 3.5 hours
NP-1B: Approx. 70 min

–323–
 2. Batteries and Chargers

BC-V500
Battery charger
•Compact battery chager for the
NP-F530/F730/F930, etc. •Two batteries
can be charged at the same time

Dimensions: 45(W) × 98(H) × 50(D) mm

Mass: Approx. 120 g
Power requirements:
AC100 to 240V, 50/60Hz
Output: DC 8.4V/0.6A

BKW-L601
Battery adaptor for between
DSR-1P, PVV-3P and
BP-L60A/BP-L90A
•Can be attached to the optional battery
case of the DSR-1P DVCAM recorder and
the PVV-3P Betacam SP 2000 PRO
recorder •Allows the DSR-1P and the
PVV-3P to be operated with BP-L60A and
BP-L90A

Dimensions: 89 (W) × 141.4 (H) × 14.2 (D) mm

(35/8 × 55/8 × 9/16 inches)
Mass: 110 g (4 oz)

DC-520
Battery adaptor for NP-1B
•Can be attached to the supplied battery
case of the DSR-1P, PVV-3P Betacam
SP 2000PRO recorder UVW-100BP
•Allows the DSR-1P, PVV-3P and
UVW-100BP to be operated with two
NP-1B batteries
•Supplies DC 12V to the DSR-1P, PVV-3P
and UVW-100BP

Dimensions: 100 (W) × 195 (H) × 44 (D) mm

(4 × 73/4 × 13/4 inches)
Mass: 230 g (8 oz)
Supplied accessories:
Screws (M3 × 6)

DC-500 (Mount type)

Battery case for BP-90A
•Battery case for one BP-90A battery
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

•Designed for the DSR-1P, PVV-3P and

UVW-100BP
•Supplies DC 12V

Dimensions: 147 (W) × 207 (H) × 62 (D) mm

(57/8 × 81/4 × 21/2 inches)
Mass: 400 g (14 oz)
Supplied accessories:
Screws (M3 × 5)

–324–
2. Batteries and Chargers

DC-210 (waist belt type)

Battery case for BP-90A
•Battery case for one BP-90A battery pack
•Supplies DC 12V to Sony video equipment

Dimensions: 145 (W) × 180 (H) × 85 (D) mm

(53/4 × 71/8 × 33/8 inches)
Mass: 500 g (1 lb 2 oz)
Supplied accessories:
Power cord (1.2m) (×1)
Belt

DC-L1
Battery Case for NP-1B
•Battery Case for a NP-1B battery to be
used with the camcorders/portable editors
which incorporates the V-shoe attachment
•Quick and easy battery change

Specifications
Dimensions: 101(W) × 196.2(H) × 54.8(D) mm
(4 × 73⁄4 × 21⁄4 inches)
Mass: 300g (11 oz)

DC-L90
Battery Case for BP-90A
•Battery Case for a BP-90A battery to be
used with the camcorders/portable editors
which incorporates the V-shoe attachment
•Quick and easy battery change

Specifications
Dimensions: 138(W) × 203.6(H) × 76.6(D) mm
(51⁄2 × 81⁄8 × 31⁄8 inches)
Mass: 620g (1 lb 6 oz)

Battery type:
BP-L40 Lithium-ion battery
Lithium-ion Battery Maximum voltage:
•Compact Lithium-ion battery for 16.8 V DC
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

professional Sony camcorders, which is Nominal voltage:

designed to match the body height of the 14.4 V DC
DSR-300P •Provides continuous camcorder Capacity: 38.9 Wh
operation for approximately 80 minutes. Dimensions (w/h/d):
•The recommended use for the BP-L40 is 92 × 138 × 37 mm
30 W or less. (3 5⁄8 × 5 1⁄2 × 1 1⁄2 inches)
Mass: Approx. 520 g (1 lb 1 oz)

–325–
 2. Batteries and Chargers

BP-L60A Specifications
Rechargeable Lithium Ion Type of battery: Lithium-ion rechargeable
Battery Pack Maximum voltage:
•High capacity lithium-ion battery •No 16.8V
Nominal voltage: 14.4V
“Memory Effect” •Built-in LED capacity
Current capacity: 60Wh
indicator for a quick visual check of the Cell capacity: 5.4Ah
remaining charge •V-shoe attachment for Operating temperature:
quick and easy battery change –20°C to +45°C (–4°F to
+113°F)
Dimensions: 101(W) ç 168.7(H) ç 37(D) mm
(4 ç 63⁄4 ç 11⁄2 inches)
Mass: 900g (1 lb 16 oz)

BP-L90A Specifications
Rechargeable Lithium Ion Type of battery: Lithium-ion rechargeable
Battery Pack Maximum voltage:
•High capacity lithium-ion battery •No 16.8V
Nominal voltage: 14.4V
“Memory Effect” •Built-in LED capacity
Current capacity: 90Wh
indicator for a quick visual check of the Cell capacity: 8.1Ah
remaining charge •V-shoe attachment for Operating temperature:
quick and easy battery change –20°C to +45°C (–4°F to
+113°F)
Dimensions: 101(W) ç 168.7(H) ç 60(D) mm
(4 ç 63⁄4 ç 23⁄8 inches)
Mass: 1300g (2 lb 14 oz)

BP-90A
Rechargeable battery pack
•Supplies DC 12V to DSR-1P, PVV-3P,
UVW-100BP, PVM-9045QM/9042QM/
6041QM, TU-1040E

Type of battery:
NiCd rechargeable
Voltage: DC 12V
Current capacity: 5Ah
Dimensions: 123 (W) × 171 (H) × 37 (D) mm
(47/8 × 63/4 × 11/2 inches)
Mass: 1.6 kg (31 lb 8 oz)

NP-1B
Rechargeable battery pack
•Supplies DC 12V to DSR-1P, PVV-3P,
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

UVW-100BP, VO-8800P, DXC-D30P/

D30WSP/327BP, PVM-9045QM/9042QM/
6041QM, TU-1040E, EVM-9010PR/1410PR

Battery used: NiCd battery

Output voltage: DC 12V
Capacity: 2.3 Ah
Dimensions: Approx.
72 (W) × 25 (H) × 185 (D) mm
(27/8 × 1 × 73/8 inches)
Mass: Approx. 600 g (1 lb 5 oz)

–326–
2. Batteries and Chargers

NP-F220/B
InfoLITHIUM Rechargeable
Battery Pack
Maximum voltage:
8.4 V DC
Capacity: 1400mAh
Dimensions (w/h/d):
82 × 20 × 54 mm
(3 1⁄4 × 13⁄16 × 2 1⁄4 inches)
Mass: Approx. 100 g (3 oz)

NP-F950
InfoLITHIUM Rechargeable
Battery Pack
Maximum voltage:
7.2 V DC
Capacity: 4050mAh
Dimensions: 38.4(W) × 59.7(H) × 70.8(D) mm
Mass: Approx. 280 g

NPA-10000/B
Three-battery Holder
•Can hold three NP-F950 InfoLITHIUM
Rechargeable Battery Pack

Power requirements:
7.2 VDC
Dimensions (w/h/d):
95 × 132 × 81mm
(3 3⁄4 × 5 1⁄4 × 3 1⁄4 inches)
Mass: Approx. 220 g

NP-F550 (F530)
InfoLITHIUM Rechargeable
Battery Pack
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

•Can be used for the DKC-CM30

Voltage: 7.2V
Capacity: 1500 mAh (1350 mAh)
Dimensions (W × H × D):
38.4 × 20.6 × 70.8 mm
(1 9⁄16 × 13⁄16 × 2 7⁄8 inches)
Mass: Approx. 95 g (110 g)

–327–
 3. AC Adaptor
Power requirements:
AC-550CE AC 110 to 120V/220 to
AC Adaptor 240V ±10%
•Supplies DC power to the one-piece selectable, 50Hz
camcorder and a portable VTR through the Power consumption: Max 130W
26-pin (CCZ-type) camera connector or the DC output: 13.5V, 7A
XLR 4-pin DC OUT connector Input/Output connectors:
CAMERA: CCZ-type 26-pin
Supplied accessories: VIDEO OUT: BNC type
AC power cord MIC OUT: Equivalent to
DC power cord XLR-3-31
Operation and DC OUT: Equivalent to
Maintenance manual XLR-4-31
EXT VBS: BNC type
Dimensions: 217 (W) × 91 (H) × 327 (D) mm
(85/8 × 35/8 × 127/8 inches)
Mass: 3.8 kg (8 lb 6 oz)

CMA-8ACE
AC Adaptor
•Supplies AC power to the one-piece
camcorder and portable VTR through the
14-pin(CCQ-BRS) camera connector

Power requirements :
AC 110 to 127V or 220 to 240V
selectable, 50/60Hz
Power consumption :
95W
Dimensions: 105(W) × 105 (H) × 308 (D) mm
(4 1⁄4 × 4 1⁄4 × 12 1⁄4 inches)
Mass: Approx. 2.8 kg (6 lb 2.8 oz)

AC-DN1
AC Adaptor
Power requirements:
AC 100V to 240V
Power consumption:
50W (90VA) or less
Power output (DC):
38W
Voltage output (DC):
16.7V
Mass: 660g
Demensions: 112(W) × 169(H) × 38(D)mm
Charging time:
BP-L60A 4hr. (to about 85% capacity)
BP-L90A 6hr. (to about 85% capacity)
Supplied accessories:
DC power cord (1)
BKW-L601/1 (1)

AC-DN2A
AC Adaptor
Power requirements: AC 100V to 240V
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

Power consumption: 180W

Power output (DC): 150W
Voltage output (DC): 16.7V
Mass: 1kg
Demensions: 112(W) × 169(H) ×
70(D)mm
Charging time: BP-L60A 4hr. (to about
85% capacity)
BP-L90A 6hr. (to about
85% capacity)
Supplied accessories: DC power cord (1)

–328–
3. AC Adaptor

AC-V100/B
AC adaptor/battery charger
•Battery charger for InfoLITHIUM battery
such as NP-F220/B and AC adoptor

Power requirement:
AC 100V to 240V, 50/60Hz
Power consumption:
25 W
Dimensions (w/h/d):
57 × 44 × 107 mm
(2 1⁄4 × 1 6⁄8 × 4 1⁄4 inches)
Mass: Approx. 190 g (6 oz)

AC-V900/B
Three-battery charger/AC
adaptor
•Battery charger which can hold three-
battery such as NP-F950/B and AC adoptor

Power requirement:
AC 100V to 240V, 50/60Hz
Power consumption:
70W
Dimensions (w/h/d):
169(W) × 58(H) × 153(D) mm
Mass: Approx. 650 g

AC-VQ800
AC Adaptor/Charger
•AC adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
InfoLITHIUM M series(consumer)

Specifications:
Power requirment:
AC 100 V to 240 V, 50 Hz/60 Hz
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 136.0(W) × 51.5(H) × 89.7(D) mm
(5 3⁄8 × 2 1⁄8 × 3 5⁄8 inches)
Mass: Approx. 250 g (0.6 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
DK-215 (DC IN type)
AC power cord (mains lead)

DC-VQ800
DC Adaptor/Charger
•Car battery adaptor for Lithium-ion type camcorder
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

•Battery charger for Lithium-ion batteries:

InfoLITHIUM L series (NP-F550/750/950) and
InfoLITHIUM M series(consumer)

Specifications
Power requirement:
DC 12 V/24 V
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 136.0(W) × 51.5(H) × 89.7(D) mm
(5 3⁄8 × 2 1⁄8 × 3 5⁄8 inches)
Mass: Approx. 300 g (0.7 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
DK-215 (DC IN type)

–329–
 3. AC Adaptor

AC-V700
AC Adaptor/Charger
•AC adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
NP-F100/200/220

Specifications:
Power requirement:
AC 100 V to 240 V, 50 Hz/60 Hz
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 127.0(W) × 54.8(H) × 95.0(D) mm
(5 × 2 1⁄4 × 3 3⁄4 inches)
Mass: Approx. 265 g (0.6 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
AC power cord (mains lead)

DC-V700
DC Adaptor/Charger
•Car battery adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
NP-F100/200/220

Specifications
Power requirement:
DC 12 V/24 V
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 127.0(W) × 54.8(H) × 95.0(D) mm
(5 × 2 1⁄4 × 3 3⁄4 inches)
Mass: Approx. 265 g (0.6 lb)
Supplied accessory:
Connectign cable DK-415 (DC plate type)
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–330–
4. System Consoles
Basic Consoles
System consoles 526 (203⁄4)
SU-450 Double size table for RM-450CE/
SU-513 SU-511
DME-450P
SU-511 Unit rack 2044 (885⁄8)
SU-511
SU-512 Unit table 1010
SU-513 Extension rack SU-513 SU-514 (397⁄8) SU-512
SU-514 Extension table
SU-515 Double size table for RM-440 SU-511

SU-515/450
Rack mount metals 1010
RMM-450 For RM-450CE/DME-450P (397⁄8) SU-514
mounting 1050 (413⁄8)
RMM-501 For Type-5/9 series VTR
mounting Unit: mm (inch)

RMM-502 For RM-500 or RM-V5 Mass: Approx. 37.2kg (82 lb) without VTR
mounting Mass: Approx. 116.7kg (257 lb 4 oz)
RMM-503 For RM-580 mounting 890 (351⁄8)
RMM-505 For RM-500 (× 2), RM-V5 (× 2) BLP-507
or RM-500/RM-V5 1050 (413⁄8)
mounting Unit: mm (inch)
1 2
RMM-506 For Betamax or audio
equipment mounting CT-501
RMM-507 For Type-7/9 series VTR
mounting (except
B
VO-9850P/9800P) A
A
B

Blank panels
BLP-501 1U Blank panel
BLP-502 2U Blank panel
BLP-503 3U Blank panel
BLP-504 1U Pad panel
BLP-505 2U Pad panel
BLP-506 6U Modification panel
BLP-507 Blank panel

EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–331–
 5. Connecting Cables
CCA-7 cables (10-pin/10-pin) CCDC cables (12-pin/4-pin) CCDC-A cables (12-pin/4-pin)
CCA-7-5 : 5m (16.5 ft) CCDC-5 : 5m (16.4 ft) CCDC-50A : 50m (164 ft)
CCA-7-25 : 25m (82 ft) CCDC-10 : 10m (33 ft) CCDC-100A : 100m (330 ft)
CCA-7-50 : 50m (165 ft) CCDC-25 : 25m (82 ft)
CCA-7-100 : 100m (330 ft) •12-pin (female) ↔ 4-pin (male)
•12-pin (female) ↔ 4-pin (male) •DXC-LS1P/107AP/950P/9100P/390P ↔
•10-pin (male) ↔ 10-pin (female) •DXC-LS1P/107AP/950P/9100P/390P ↔ CMA-D2CE
•RM-M7G ↔ DXC-D30P/300P/637P/ CMA-D2CE
327BP series
•RM-M7G ↔ CCU-M7P/M5P
•RM-M7G ↔ CA-325AP/325BP

CCDD-2.5 (4-pin/4-pin) CCDQ-06 (14-pin/4-pin) CCF cables (6-pin/6-pin)

•4-pin (male) ↔ 4-pin (female), 2.5m (8.2 ft) •14-pin (male) ↔ 4-pin (male), 0.6m (2 ft) CCF-1 : 1m (3.3 ft)
•SEG-2000AP series ↔ CRK-2000P CCF-5 : 5m (16.4 ft)
CCF-10 : 10m (33 ft)
CCF-25 : 25m (82 ft)
CCF-50 : 50m (164 ft)

•6-pin (male) ↔ 6-pin (female)

•SEG-2000AP/2550AP ↔ WEX-2000P

CCMC cables (12-pin/12-pin) CCMC-16P10 (16-pin/20-pin) CCMC-9DS (9-pin/4BNCs, DIN 4-pin)

CCMC-12P02 : 2m (6.4 ft) CCMC-16P03 : 3m (10 ft) •9-pin D-sub (male) ↔ BNCs (R/G/B/
CCMC-12P05 : 5m (16.4 ft) CCMC-16P10 : 10m (33 ft) SYNC, male), DIN 4-pin (Y/C, male)
CCMC-12P10 : 10m (33 ft) •5m (16.4 ft)
CCMC-12P25 : 25m (82 ft) •16-pin (female) g 20-pin (female) •For video output from DXC-950P/9100P/
•DXC-LS1P Camera Head g DXC-LS1P 390P
•12-pin (male) ↔ 12-pin (female) Camera Control Unit
•DXC-LS1P/107AP/950P/9100P/390P ↔
CMA-D2CE
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–332–
5. Connecting Cables

CCMC-9DSMN (9-pin/3BNCs, CCTQ-3RGB (20-pin/14-pin) CCTZ-3RGB (20-pin/26-pin)

AUDIO MINI JACK, DIN 4-pin) •DXC-950P/9100P ↔ CCU-M5P, 3m (10 •DXC-950P/9100P ↔ CCU-M5P, 3m (10
•9-pin D-sub (male) ↔ BNCs (R/G/B, ft) ft)
male), DIN 4-pin (Y/C, male), AUDIO MINI •CCQQ-1 interconnection adaptor is •CCZZ-1E interconnection adaptor is
JACK (SYNC), 5m (16.4 ft) supplied supplied
•DXC-950P/9100P ↔ UP-7300MDP/ •It is possible to extend the cable length •It is possible to extend the cable length
5600MDP/2850P/2800P/2330P/2300P/ with CCQ-AM cable with CCZ-A cable
2100P •RGB/VBS output to CCU-M5P •RGB/VBS output to CCU-M7P/M5P

CCTZ-3YC (20-pin/26-pin) CCQ-AM cables (14-pin/14-pin) CCQ-BRS cables (14-pin/14-pin)

•DXC-950P/9100P ↔ CCU-M5P, 3m (10 CCQ-10AM : 10m (33 ft) CCQ-2BRS : 2m (6.4 ft)
ft) CCQ-25AM : 25m (82.5 ft) CCQ-5BRS : 5m (16.4 ft)
•CCZZ-1E interconnection adaptor is CCQ-50AM : 50m (165 ft) CCQ-10BRS : 10m (33 ft)
CCQ-100AM : 100m (330 ft) CCQ-25BRS : 25m (82.5 ft) only for projector
supplied
CCQ-50BRS : 50m (165 ft) only for projector
•It is possible to extend the cable length
with CCZ-A cable •14-pin (male) ↔ 14-pin (female)
•CA-327P ↔ CCU-M5P •14-pin (male) ↔ 14-pin (female)
•YC/VBS output to CCU-M7P/M5P •CA-327P ↔ VO-8800P/CMA-8ACE,
S-VHS VTR
•VPH-G70QM/G70QMG/G70VRM/D50QM
↔ PC-1271M

CCQX-3 (14-pin/XLR 4-pin) CCXC-9DBS (9-pin/5BNCs) CCXC-9DD (9-pin/9-pin)

•14-pin (male) ↔ XLR 4-pin (female), 3m •9-pin D-sub (male) g BNCs (R/G/B/ •9-pin D-sub (male) ↔ 9-pin D-sub (male)
(10 ft) SYNC, male) •5m (16.4 ft)
•For external DC input to DSR-300P/ •5m (16.4 ft) •For video output from DXC-950P/9100P
UVW-100BP, CA-537P/327P from •For video output from
CMA-8ACE/AC-550CE DXC-H10/950P/9100P/390P
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–333–
 5. Connecting Cables
CCZ-A cables (26-pin/26-pin) CCZQ-A cables (14-pin/26-pin) DV cables
CCZ-A2 : 2m (6.5 ft) CCZQ-A2 : 2m (6.6 ft) CCF-3L (6-pin with lock*/6-pin): 3.5 m (11.5 ft)
CCZ-A5 : 5m (16.5 ft) CCZQ-A5 : 5m (16.5 ft) CCFD-3L (6-pin with lock*/4-pin): 3.5 m (11.5 ft)
CCZ-A10 : 10m (33 ft) CCZQ-A10 : 10m (33 ft)
CCZ-A25 : 25m (82 ft) *The connector on one end of the cable has a locking
mechanism, and is attached to a DV connector with the
CCZ-A50 : 50m (164 ft) •14-pin (male) ↔ 26-pin (female) same locking mechanism, such as the DSR-500WSP.
CCZ-A100 : 100m (330 ft) •CA-537P, DSR-300P/UVW-100BP ↔
VO-8800P, S-VHS VTR
•26-pin (male) ↔ 26-pin (female) •CA-537P ↔ CMA-8ACE
•CA-537P ↔ CCU-M7P/M5P
•CA-537P, DSR-300P/UVW-100BP ↔
BVW-50P/BVV-5P/DNV-5P
•DXC-H10 ↔ CMA-H10
•DXC-390P ↔ CMA-D3CE

RCC-A cables (15-pin/15-pin) RCC-5AA cable (9-pin/15-pin) RCC-15FT (33-pin/33-pin)

RCC-5A : 5m (16 ft) Audio mixer control cable Remote control extension cable
RCC-11A : 10m (33 ft)
•9-pin (male) ↔ 15-pin (female), 5m (16ft) •33-pin (male) ↔ 33-pin (female), 15m
•PVE-500 ↔ MXP-290 (49.2 ft)
•15-pin (male) ↔ 15-pin (female)
•RM-450CE/500/555/580 ↔ All
•BVE-600 ↔ MXP-290
Type-5/7/9 VTRs, EVO-9800P/9850P
•BVE-910 (with BKE-916A) ↔ MXP-290

RCC-5F (33-pin/33-pin) RCC-G cables (9-pin/9-pin) SIC-M cables (14-pin/14-pin)

RCC-5G : 5m (16 ft) SIC-M1 : 1m (3.3 ft)
Remote control cable RCC-10G : 10m (33 ft) SIC-M5 : 5m (16.4 ft)
•33-pin (male) ↔ 33-pin (female), 5m RCC-30G : 30m (99 ft) SIC-M15 : 15m (49 ft)
(16.4 ft) SIC-M25 : 25m (82 ft)
•RM-450CE/500/555/580 ↔ All •9-pin (male) ↔ 9-pin (male) SIC-M50 : 50m (164 ft)
Type-5/7/9 VTRs, •PVW-2800P/2650P/2600P, UVW-1800P/
EVO-9800P/9850P 1600P, DSR-2000P/85P/80P/70P/60P/40P, •14-pin (male) ↔ 14-pin (female)
SVO-5800P/SVP-5600P ↔ 9-pin equipped •VPH-G90E/G90M/G70QM/G70QMG/
Sony machines G70VRM/D50QM ↔ PC-1271M
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–334–
5. Connecting Cables
SYC cables (4-pin/4-pin) UGC cables (BNC/BNC) VDC-5A (7-pin/7-pin)
SYC-2 : 2m (6.4 ft) UGC-1 : 1m (3.3 ft) Dubbing cable
SYC-5 : 5m (16.4 ft) UGC-2 : 2m (6.4 ft)
•7-pin (male) ↔ 7-pin (female), 5m (16.4 ft)
UGC-5 : 5m (16.4 ft)
•VTRs with ↔ VTRs with
•Mini DIN 4-pin(male) ↔ Mini DIN 4-pin UGC-10 : 10m (33 ft)
7-pinDUB connector 7-pin DUB connector
(female)
•PVW/UVW series VTRs •BNC (male) ↔ BNC (male), 3C-2V VCS-500
DA-500
•DVCAM VTRs
•DA-500 ↔ DA-500
•SVO-5800P/9620/9500MDP,
SVP-5600P/9020
•SVT-S3050P

VDC-C5 (12-pin/12-pin) VMC cables (8-pin/8-pin) VMC-1MQ (14-pin/8-pin)

Dubbing cable VMC-3P : 3m (10 ft) •14-pin (male) ↔ 8-pin (male), 1.5m (5 ft)
•12-pin/12-pin, 5m (16 ft)
VMC-5P : 5m (16.4 ft) •VO-8800P ↔ Monitor
VMC-10P : 10m (33 ft) TV tuner
•PVW series VTRs
•UVW-1800P/1600P •8-pin (male) ↔ 8-pin (male)
•VTR ↔ Monitor
TV tuner
•TV tuner ↔ projector

VMC i.LINK cables VK-110A/120A (4-pin/4-pin) VK-305 (4-pin/4-pin)

(4-pin/4-pin) VK-110A : 10m (33 ft) •4-pin (male) ↔ 4-pin (female) , 5m (16.4 ft)
VMC-IL4415 : 1.5 m(5 ft) VK-120A : 20m (65.6 ft) •Water-resistant extention cable
VMC-IL4435 : 3.5 m(12 ft) SSC-534AM ↔ SSM-504AM/724AMR
(4-pin/6-pin) •4-pin (male) ↔ 4-pin (male)
VMC-IL4615 : 1.5 m(5 ft) •SSC-534AM ↔ SSM-504AM/724AMR
VMC-IL4635 : 3.5 m(12 ft)

•DVCAM series
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–335–
 5. Connecting Cables
VK-310A/320A (4-pin/4-pin)
VK-310A : 10m (33 ft)
VK-320A : 20m (65.6 ft)

•4-pin (male) ↔ 4-pin (male)

•SSC-534AM ↔ SSM-504AM/724AMR

Cable connections
Video camera
DXC-D30P/D30WSP/637P/ DXC-D30P/D30WSP/637P/
DXC-950P DXC-107AP DXC-H10
327BP with CA-537P 327BP with CA-327P
VO-8800P
VTR

CCZQ-A CCQ-BRS --- --- ---

or S-VHS VTR
camera AC adaptor Camera control unit

CCU-M7P CCZ-A --- --- --- ---

CCTZ-3RGB/3YC+
CCZ-A or
CCU-M5P CCZ-A CCQ-AM --- ---
CCTQ-3RGB+
CCQ-AM
CCZQ-A/ CCQ-BRS
CMA-8ACE --- --- ---
CCQX-3 CCQX-3
CMA-D2CE --- --- CCDC/CCMC-12P CCDC/CCMC-12P ---
CMA-H10 --- --- --- --- CCZ-A

Audio connecting cords

EQUIPMENT AND

RK-5XLRF
ACCESSORIES
OTHER VIDEO

RK-5XLRF: XLR-3-11C type (female)—phono, 5m

RK-5XLRM: XLR-3-12C type (male)—phono, 5m

–336–
6-1 Betacam SP Videocassette Tapes

BCT-MA Series Metal Videocassette

Tapes
BCT-5MA/10MA/20MA/30MA (Small cassettes)
BCT-5MLA/10MLA/20MLA/30MLA/60MLA/90MLA
(Large cassettes)
Tape length Playing time Mass*
Model m (feet) (min) g (lb.)
BCT-5MA 42 (138) 6 231 (0.51)
BCT-10MA 78 (256) 12 241 (0.53)
BCT-20MA 150 (492) 24 256 (0.56)
BCT-30MA 222 (728) 36 276 (0.61)
BCT-5MLA 58 (190) 9 625 (1.38)
BCT-10MLA 93 (305) 15 630 (1.39)
BCT-20MLA 172 (564) 29 650 (1.43)
BCT-30MLA 243 (797) 39 660 (1.45)
BCT-60MLA 457 (1,499) 75 730 (1.61)
BCT-90MLA 670 (2,198) 110 790 (1.74)
*With case
•For Betacam SP 2000PRO VTRs
•Offers high C/N, low head-wear, reduced drop-outs and
outstandibg durability

UVWT-MA Series Metal

Videocassette Tapes
UVWT–10MA/20MA/30MA (Small cassettes)
UVWT–60MLA/90MLA (Large cassettes)
Tape length Playing time Mass*
Model m (feet) (min) g (lb.)
UVWT-10MA 78 (256) 12 241 (0.53)
UVWT-20MA 150 (492) 24 256 (0.56)
UVWT-30MA 222 (728) 36 276 (0.61)
UVWT-60MLA 457 (1,499) 75 730 (1.61)
UVWT-90MLA 670 (2,198) 110 790 (1.74)
*With case
•For Betacam SP UVW Series VTRs
•Offers high quality and outstanding durability
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–337–
 6-2 DVCAM Videocassette Tape

PDV-ME Series
Digital Videocassette Tapes
PDVM-12ME/22ME/32ME/40ME (Mini size)
PDV-34ME/64ME/94ME/124ME/184ME (Standard size)
Tape length Recording/Playback time Mass*
Model m (feet) (min) g (lb.)
PDVM-12ME 24 (79) 12 61 (0.134)
PDVM-22ME 41 (135) 22 62 (0.137)
PDVM-32ME 58 (190) 32 63 (0.139)
PDVM-40ME 71 (233) 40 64 (0.141)
PDV-34ME 61 (200) 34 124 (0.273)
PDV-64ME 112 (367) 64 128 (0.282)
PDV-94ME 163 (535) 94 132 (0.291)
PDV-124ME 214 (702) 124 135 (0.298)
PDV-184ME 315(1,033) 184 142 (0.313)
*With case

•For DVCAM DSR Series VTRs

•High output and high reliability due to pure cobalt advanced
evaporated coating with DLC (Diamond Like Carbon) protective
layer
•Built-in 16 kbit IC Memory

PDV-MEM Series
Digital Videocassette Tapes
(Master Tape)
PDVM-32MEM/40MEM (Mini size)
PDV-64MEM/124MEM/184MEM (Standard size)
Tape length Recording/Playback time Mass*
Model m (feet) (min) g (lb.)
PDVM-32MEM 58 (190) 32 63 (0.139)
PDVM-40MEM 71 (233) 40 64 (0.141)
PDV-64MEM 112 (367) 64 128 (0.282)
PDV-124MEM 214 (702) 124 135 (0.298)
PDV-184MEM 315(1,033) 184 142 (0.313)
*With case

•For DVCAM DSR Series VTRs

•Offers higher output, lower noise, higher C/N characteristics and
extremely low error rates due to Hyper Evaticle II Magnetic Particles
•Ensures superior quality even at a four times high-speed transfer
mode
EQUIPMENT AND

•Built-in 16 kbit IC Memory

ACCESSORIES
OTHER VIDEO

–338–
6-2 DVCAM Videocassette Tape

PDV-N Series
Digital Videocassette Tapes
(Non IC type)
PDVM-32N/40N (Mini size)
PDV-64N/124N/184N (Standard size)
Tape length Recording/Playback time Mass*
Model m (feet) (min) g (lb.)
PDVM-32N 58 (190) 32 63 (0.139)
PDVM-40N 71 (233) 40 64 (0.141)
PDV-64N 112 (367) 64 128 (0.282)
PDV-124N 214 (702) 124 135 (0.298)
PDV-184N 315(1,033) 184 142 (0.313)
*With case

•For DVCAM DSR Series VTRs

•High output and high reliability due to pure cobalt advanced
evaporated coating with DLC (Diamond Like Carbon) protective
layer
•Without IC Memory

PDV-12CL/PDVM-12CL
Video Head Cleaning Cassette
(for DVCAM)
•For DVCAM DSR Series VTRs

EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–339–
 6-3 S-VHS Videocassette Tapes

MQSE Series S-VHS Videocassette Tape

•Metal particle tape for S-VHS recording •Anti-static lid to protect the
tape from dirt and dust particles for low dropouts •S-VHS mode
recording can be activated via the detection holes on the back of the
cassette • Rugged, pro-type album case

Model name Playing time* Tape length Mass**

(min) m (ft) g (lb.)
MQSE-30 30 45 (148) 340 (0.75)
MQSE-60 60 88 (289) 350 (0.77)
MQSE-120 120 173 (568) 370 (0.81)
MQSE-180 180 258 (847) 390 (0.86)
* Playing time = SP mode
**With case
EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–340–
7. Memory Stick
Power source: 2.7 V to 3.6 V
MSA-4A/8A/16A/32A/64A Power consumption (average):
“Memory Stick”™ IC Memory Approx. 45 mA
Power consumption (standby):
Media Approx. 130 µA
•IC memeory media which is designed for Dimensions: Approx. 21.5(W) × 50(H) × 2.8(D) mm
the coming generation after tape and disk. (7⁄8 × 2 × 1⁄8 inches)
•Record and store still images and other Mass: Approx. 4g
data •Transfer the data to other products
easily without cables •Compact and
removable •Need no mechanism •Quick
access •Simple 10-pin connection

Specifications
IC memory type: Flash memory
Storage capacity: 4MB/8MB/16MB/32MB/64MB
Connector type: 10-pin connector
Clock speed: Max. 20 MB/s
Write speed: Max. 1.50 MB/s
Read out speed: Max. 2.45 MB/s *“Memory Stick” and are trademarks of Sony Corporation.

EQUIPMENT AND
ACCESSORIES
OTHER VIDEO

–341–
 OTHER VIDEO
EQUIPMENT AND
ACCESSORIES

–342–
Memo

–343–
Memo

–344–
Memo

–345–
 PRODUCT INDEX
5UPC-5510................................215 CCQ-BRS cables ......................333 DSRM-20.....................................26 LC-DS300SFT.............................73
5UPR-6040................................221 CCQX-3.....................................333 DSRM-E1P..................................27 LC-DS500....................................73
5UPR-6080................................221 CCTQ-3RGB .............................333 DV cables..................................334 LCH-TRV900...............................74
A CCTZ-3RGB..............................333 DXBK-701 ...................................71 LCH-VX9000 ...............................74
A-12...........................................302 CCTZ-3YC.................................333 DXC-107AP.................................84 LCR-1 ..........................................73
A-25...........................................302 CCU-M5P ....................................66 DXC-327BP series ......................61 LCS-T805 ..................................316
A-25N ........................................302 CCU-M7P ....................................65 DXC-390P ...................................81 LMD-1041..................................136
AC-148F ....................................302 CCU-TX7P ..................................64 DXC-9100P .................................82 LMP-600....................................178
AC-550CE .................................328 CCXC-9DBS..............................333 DXC-950P ...................................83 LMP-C120 .................................178
AC-DN1 .....................................328 CCXC-9DD................................333 DXC-D30P...................................52 LMP-L2000................................179
AC-DN2A...................................328 CCZ-A cables............................334 DXC-D30WSP.............................53 LMP-P120 .................................178
AC-E90HG ..................................86 CCZQ-A cables .........................334 DXC-H10 .....................................79 LMP-P200 .................................178
AC-V100/B ................................329 CDP-3100/CDS-3100................288 DXC-LS1P...................................80 LMP-Q120 .................................179
AC-V700....................................330 CDP-D500 .................................289 DXF-41 ........................................72 LMP-S120 .................................179
AC-V900/B ................................329 CHP-411DM ..............................171 DXF-51 ........................................72 LO-23 ..........................................77
AC-VQ800 .................................329 CMA-8ACE................................328 DXF-601CE .................................71 LO-26 ..........................................77
ACC KIT-201 ...............................67 CMA-D2CE..................................85 DXF-701WSCE ...........................72 LO-32BMT...................................77
ACC KIT-PD1 ..............................67 CMA-D3CE..................................85 E LO-UCMT ....................................86
ADN-8080..................................187 CMA-H10.....................................85 EC-0.3C2.....................................74 M
AN-820A....................................314 COU-TX7.....................................70 EC-0.5C2.....................................75 MB-502B ...................................141
B CRS-3P .....................................303 EC-1.5CF ..................................315 MB-508......................................141
B-305B ......................................303 CST-1000SP .............................321 EC-10XLR2/5XLR2 ...................303 MB-509......................................142
B-500.........................................304 CVX-V18NSP ..............................29 ECM-121BMP ...................297, 307 MB-510......................................142
BC-1WDCE ...............................323 CVX-V1P .....................................28 ECM-122BMP ...................297, 308 MB-514......................................142
BC-410CE .................................323 CVX-V3P .....................................28 ECM-166 Series........................297 MB-520......................................142
BC-L100CE ...............................323 D ECM-166BMP ...........................308 MB-806A ...................................310
BC-L50 ......................................323 DA-1400 ....................................320 ECM-23F3PR ............................291 MMD-140...................................232
BC-V500....................................324 DA-500 ......................................320 ECM-310 Series........................298 MQSE Series ............................340
BCT-MA Series .........................337 DC-210 ......................................325 ECM-310BC ..............................306 MSA-4A/8A/16A/32A/64A .........341
BK-803 ........................................10 DC-500 ......................................324 ECM-310BMP ...........................308 MVA-12........................................87
BKJ-100.....................................188 DC-520 ......................................324 ECM-350BC ......................298, 307 MVA-265......................................88
BKM-101C/102..........................140 DC-L1 ........................................325 ECM-44 Series..........................295 MVA-380......................................88
BKM-103 ...................................140 DC-L10 ......................................143 ECM-44BMP .............................307 MVA-40........................................87
BKM-201SC ..............................140 DC-L90 ......................................325 ECM-510 ...................................292 MVA-41A .....................................88
BKM-202FN...............................141 DC-V700....................................330 ECM-530 ...................................292 MVA-690......................................88
BKM-501D.................................141 DC-VQ800.................................329 ECM-531 ...................................292 MVAC-33 series ..........................87
BKNW-121 ..................................26 DC-WL800.................................312 ECM-55 Series..........................295 N
BKNW-225 ..................................27 DCC-XLR4 ................................143 ECM-66 Series..........................296 NP-1B........................................326
BKSH-209G...............................108 DCK-500P .................................104 ECM-670 .............................75, 291 NP-F220/B.................................327
BKSH-218G...............................108 DFS-300P..................................101 ECM-672 .............................75, 291 NP-F550 (F530) ........................327
BKSH-236G...............................108 DFS-500P..................................100 ECM-77 Series..........................296 NP-F950 ....................................327
BKSR-2020 ...............................107 DFS-700P....................................99 ECM-77BC ................................306 NPA-10000/B.............................327
BKSR-2021 ...............................107 DKA-AC30.................................233 ECM-77BMP .............................307 P
BKSR-2030 ...............................107 DKA-GP30.................................233 ECM-999PR ..............................291 PC-3000 ....................................166
BKSR-2031 ...............................107 DKB-5008..................................233 ECM-MS5..................................292 PCB-500P .................................275
BKSR-2070 ...............................108 DKC-5000..................................228 ES-3 ............................................94 PCM-7040 .................................284
BKW-2010 ...................................10 DKC-CM30 ................................229 ES-7 ............................................92 PCM-R300.................................286
BKW-L601 .................................324 DKC-FP3 ...................................230 EXB-5010 ..................................172 PCM-R700/R500 .......................285
BLP-501 ....................................331 DKC-ST5 ...................................227 EXB-DS10 .................................172 PCS-1500P ...............................274
BLP-502 ....................................331 DKR-700P .................................231 F PCS-5100P ...............................272
BLP-503 ....................................331 DMX-E2000...............................290 F-115 .........................................300 PCS-A300 .................................281
BLP-504 ....................................331 DMX-E3000...............................290 F-710 .........................................300 PCS-A510 .................................276
BLP-505 ....................................331 DR-100 ........................................72 F-720 .........................................300 PCS-A520EK.............................276
BLP-506 ....................................331 DRV-1000P .................................22 F-730 .........................................300 PCS-DS150P ............................280
BLP-507 ....................................331 DSBK-100P .................................23 F-740 .........................................300 PCS-F500..................................276
BP-90A ......................................326 DSBK-110P .................................23 F-780 .........................................301 PCS-F510..................................276
BP-L40 ......................................325 DSBK-120P .................................23 FS-20.........................................233 PCS-G510P...............................277
BP-L60A ....................................326 DSBK-130P .................................23 FS-30 ................................212, 232 PCS-I150...................................280
BP-L90A ....................................326 DSBK-140 ...................................24 FS-36.........................................212 PCS-I151...................................280
BTA-801 ....................................312 DSBK-150 ...................................24 FXE-120P....................................97 PCS-I152...................................281
BVS-3100P................................102 DSBK-160 ...................................24 G PCS-I500...................................278
BVS-3200P/3200CP..................102 DSBK-170 ...................................24 GC-0.7MP .................................315 PCS-I510...................................278
BVX-10P......................................10 DSBK-180P .................................25 H PCS-I520...................................278
BZSR-2000 (V1.0).....................109 DSBK-190 ...................................25 HSR-1P .....................................266 PCS-K21 ...................................279
C DSBK-200 ...................................25 HSRA-11 ...................................267 PCS-K32 ...................................279
CA-325AP ...................................68 DSBK-301A .................................71 I PCS-K40 ...................................279
CA-327P......................................68 DSBK-501P .................................71 IF-FXE2 .......................................98 PCS-K60 ...................................279
CA-511 ........................................69 DSC-1024G...............................190 IFB-1000....................................169 PCS-K70 ...................................280
CA-512P......................................69 DSC-1024HD ............................189 IFB-1200....................................169 PCS-MC10 ................................278
CA-513 ........................................69 DSR-130P ...................................54 IFB-12A .....................................167 PCS-R500 .................................277
CA-537P......................................69 DSR-1P .......................................19 IFB-1301....................................169 PCS-R510 .................................277
CA-TX7P .....................................70 DSR-2000P .................................12 IFB-1400....................................169 PCS-T500..................................277
CA-WR855 ..................................70 DSR-200AP.................................58 IFB-21........................................167 PCS-UC150...............................281
CA-WRR855..............................312 DSR-20MDP................................47 IFB-40........................................168 PDV-12CL/PDVM-12CL ............339
CAC-12........................................74 DSR-20P .....................................18 IFB-50........................................168 PDV-ME Series .........................338
CAC-4..........................................75 DSR-300P ...................................57 IFB-G70QMG ............................168 PDV-MEM Series ......................338
CCA-7 cables ............................332 DSR-30P .....................................17 IFB-G90E ..................................168 PDV-N Series ............................339
CCDC cables ............................332 DSR-40P .....................................16 IFB-X2000E...............................170 PFM-500A2WE .........................135
PRODUCT INDEX

CCDC-A cables.........................332 DSR-500WSP .............................56 IFU-1271M ................................167 PFM-510A1WE .........................134

CCDD-2.5..................................332 DSR-60P .....................................15 IFU-SC50 ..................................167 PGM-100P1MD .........................133
CCDQ-06...................................332 DSR-70P .....................................20 K PGM-200R1E/200R1A ..............131
CCF cables ...............................332 DSR-80P .....................................14 K-1161 .......................................315 PGM-200R2E ............................132
CCMC cables ............................332 DSR-85P .....................................13 K-1236.......................................314 PMS-500P/400P........................268
CCMC-16P10 ............................332 DSR-PD1P ..................................60 K-1237.......................................314 PSS-10/70/90/600/610/
CCMC-9DS ...............................332 DSR-PD100P ..............................59 L 722/2000 ...........................177
CCMC-9DSMN..........................333 DSR-V10P...................................21 LC-421.........................................73 PVE-500 ......................................96
CCQ-AM cables ........................333 DSRM-10.........................11, 25, 36 LC-DN220 ...................................27 PVM-145E .................................137

–346–
PRODUCT INDEX
PVM-146E .................................137 SLR-102/103A...........................145 UP-960CE .................................208 VCS-1000..................................318
PVM-14M2E/14M2A..................119 SMF-400....................................173 UP-980CE .................................207 VCS-500....................................320
PVM-14M2MDE/14M2MDA ......122 SMF-401....................................173 UP-D2500..................................200 VCS-63A ...................................319
PVM-14M4E/14M4A..................118 SMF-402....................................173 UP-D2600..................................199 VCT-U14......................................76
PVM-14N5E/14N5A ..................121 SMF-410....................................173 UP-D2600S ...............................198 VDC-5A .....................................335
PVM-14N5MDE.........................123 SMF-D102 .................................174 UP-D5500..................................196 VDC-C5 .....................................335
PVM-14N6E/14N6A ..................120 SMF-D110 .................................174 UP-D6500/D6400/D6300 ..........195 VF-504.......................................143
PVM-20M2E ..............................113 SPT-M128CE/M124CE/ UP-D70A ...................................193 VF-505.......................................143
PVM-20M2MDE/20M2MDA.......117 M122CE ............................244 UP-D70XR.................................194 VID-P110 ...................................164
PVM-20M4E/20M4A..................112 SPT-M320CE/M324CE/ UP-D890....................................201 VID-P150...................................165
PVM-20M7MDE.........................116 M328CE ............................243 UP-DP10 ...................................197 VID-P50.....................................164
PVM-20N5E/20N5A...................115 SRP-12DAR ..............................319 UPA-2001 ..................................216 VK-110A/120A...........................335
PVM-20N6E/20N6A...................114 SRP-200DA...............................319 UPA-2002 ..................................216 VK-305 ......................................335
PVM-20S1WE/20S1WA ............130 SS-X500A..................................144 UPA-2003 ..................................216 VK-310A/320A...........................336
PVM-2950QM............................129 SS-X7A......................................144 UPA-5500 ..................................215 VLC-600 ....................................180
PVM-4B1E.................................139 SSC-534AM ..............................269 UPA-6002 ..................................211 VLC-SC50 .................................180
PVM-6041QM............................128 SSC-C108P/C104P...................241 UPA-6003 ..................................211 VMC cables...............................335
PVM-9040ME ............................127 SSC-C370P...............................242 UPA-D3 .....................................226 VMC-1MQ .................................335
PVM-9042QM............................126 SSC-CX34P ..............................236 UPC-10P23E.............................216 VMC i.LINK cables ....................335
PVM-9043MD............................125 SSC-DC10P ..............................239 UPC-10P34 ...............................217 VO-9600H ...................................46
PVM-9045QM............................124 SSC-DC14P/DC18P..................240 UPC-10S01 ...............................217 VPD-LE100 ...............................163
PVM-95E ...................................138 SSC-DC330P/DC334P/ UPC-2010..................................217 VPDL-Z1014..............................185
PVM-96E ...................................138 DC338P ............................238 UPC-2020..................................217 VPDL-Z1019..............................185
PVS-1240S................................322 SSC-DC50AP/DC54AP/58AP ...237 UPC-2040A ...............................218 VPDL-Z1023..............................185
PVS-1680S................................321 SSC-M370CE............................245 UPC-2045..................................219 VPDL-Z1037..............................186
PVS-820S..................................322 SSM-125CE ..............................253 UPC-2070E ...............................219 VPE/VPL/VPM series................181
PVS-880S..................................322 SSM-14N5E ..............................250 UPC-20S01 ...............................218 VPH-D50HTM ...........................150
PVV-3P..........................................5 SSM-175ACE ............................254 UPC-20S04 ...............................218 VPH-D50QM .............................149
PVW-2600P...................................4 SSM-20N5E ..............................251 UPC-20S16 ...............................218 VPH-G70QM/G70QMG.............147
PVW-2650P...................................3 SSM-504AM/724AMR ...............270 UPC-5510..................................215 VPH-G70VRM ...........................148
PVW-2800P...................................2 SSM-9040P ...............................249 UPC-5510C ...............................215 VPH-G90E/G90M......................146
PVW-D30P ..................................55 SSM-930CE ..............................252 UPC-7010..................................214 VPH-V20M ................................154
PWB-411D.................................171 SSM-Q177CE............................255 UPC-7020..................................214 VPH-V22M ................................153
PWK-411D.................................171 SU-450 ......................................331 UPC-7030..................................215 VPL-CS1 ...................................161
PWR-B511A/B411A...................170 SU-511 ......................................331 UPC-740 (8840A)......................214 VPL-FE100E/FE100M...............155
PWR-P512A/P513A/P412A/ SU-512 ......................................331 UPC-747....................................214 VPL-FX200E/FX200M...............156
P413A ..............................171 SU-513 ......................................331 UPC-8810..................................213 VPL-PX1....................................160
R SU-514 ......................................331 UPC-8817..................................213 VPL-PX20..................................158
RCC-15FT .................................334 SU-515 ......................................331 UPC-8820..................................213 VPL-PX30..................................157
RCC-5AA cable.........................334 SU-556 ......................................144 UPK-5500 ..................................211 VPL-S900E/S900M ...................159
RCC-5F .....................................334 SU-PJ2000 ................................179 UPK-5502SC .............................211 VPL-VW10HT............................162
RCC-A cables ...........................334 SVAC-901....................................45 UPP-110HA ...............................220 VPLL-2009 ................................184
RCC-G cables ...........................334 SVAC-902....................................44 UPP-110HD...............................220 VPLL-2014 ................................184
RCP-TX7 .....................................68 SVAC-903....................................45 UPP-110HG...............................221 VPLL-2075 ................................184
RM-450A .....................................95 SVAC-904....................................43 UPP-110S..................................220 VPLL-3050 ................................185
RM-5500....................................212 SVBK-100....................................34 UPP-210HD...............................219 VPLL-FM20 ...............................182
RM-81..........................................68 SVBK-110....................................34 UPP-210SE ...............................220 VPLL-FM21 ...............................182
RM-91 ...............................212, 232 SVBK-120....................................34 UPR-6025..................................221 VPLL-FM30 ...............................182
RM-921......................................140 SVBK-140....................................34 UPT-210BL................................219 VPLL-Z2019 ..............................183
RM-C700 ...................................232 SVBK-150....................................35 UPT-730BL................................213 VPLL-Z2025 ..............................183
RM-C950 .....................................86 SVBK-160....................................35 UPX-C21 ...................................192 VPLL-Z2039 ..............................183
RM-D7100 .................................287 SVBK-170P .................................35 UPZ-2000M ...............................222 VPLL-Z3020 ..............................184
RM-D7200 .................................287 SVBK-180P .................................35 UPZ-7000I .................................223 VPLL-ZM101 .............................183
RM-D750 ...................................287 SVBK-901....................................44 UPZ-7000M ...............................223 VPLL-ZM31 ...............................182
RM-M7G......................................67 SVBK-902....................................44 UPZ-7001 ..................................222 VPS-120FH/100FH ...................176
RM-PJ10 ...................................174 SVCC-960 ...................................44 UPZ-7002 ..................................222 VPS-50C ...................................175
RM-PJ1001 ...............................175 SVO-1320P .................................37 UPZ-7003 ..................................222 VPS-511RF/411RF ....................170
RM-PJ3000S .............................175 SVO-1520P .................................38 UVR-60P ...............................10, 26 VPS-515RF/415RF ...................170
RM-PJD50.................................174 SVO-3500MDP............................49 UVW-100BP ................................62 VSR-2000..................................106
RM-PJM610 ..............................175 SVO-5800P .................................30 UVW-1200P ..................................9 W
RM-V200 ...............................39, 43 SVO-915PL .................................41 UVW-1400AP ................................8 WBC Coaxial Cable ..................316
RM-VJ1P .....................................67 SVO-9500MDP............................48 UVW-1600P ..................................7 WD-820A...................................314
RMM-110 .....................................11 SVO-9620....................................32 UVW-1800P ..................................6 WRR-802A ................................310
RMM-130...............................11, 26 SVO-965P ...................................40 UVWT-MA Series ......................337 WRR-805A ................................311
RMM-1800...................................76 SVP-5600P..................................31 UY-S90 ......................................224 WRR-810A ................................311
RMM-2000.................................109 SVP-9020 ....................................33 UYA-S77FC...............................225 WRR-855A ..........................76, 311
RMM-450...................................331 SVRM-100A ..................11, 36, 267 UYA-S77TR...............................225 WRT-805A.................................306
RMM-501...................................331 SVRM-911 ...................................43 V WRT-807A.................................305
RMM-502...................................331 SVRM-960...................................43 VA-200E ....................................321 WRT-808A.................................306
RMM-503...................................331 SVT-1000P ................................263 VCL-04UVM ................................89 WRT-810A.................................305
RMM-505...................................331 SVT-124P ..................................264 VCL-1205BYS ...........................234 WRT-822A.................................305
PRODUCT INDEX

RMM-506...................................331 SVT-5050P ................................261 VCL-12UVM ................................89 WRT-830A.................................305

RMM-507...................................331 SVT-L230P ................................260 VCL-3ADXEA ............................248 WRU-806A ................................310
RMM-TXC7 .................................76 SVT-RM10.................................265 VCL-4V8WEA............................248 Y
RMM-TXR7 .................................77 SVT-RS1A .................................265 VCL-707BXM ..............................89 YS-DX316P/DX216CE ..............258
RVP-411DMS ............................152 SVT-S3050P..............................262 VCL-713BXS .............................234 YS-Q440P .................................257
RVP-511DMS ............................151 SYC cables ...............................335 VCL-714BXA ..............................78 YS-S6 ........................................256
S T VCL-714BXEA.............................89 YS-SX310P/SX210CE ..............259
S16 x 6.7BMD-D38 .....................89 T-301/305/307 ...........................247 VCL-717BXEA.............................89 YS-W150P ..........................85, 246
SAD-26......................................302 TU-1040E ..................................144 VCL-918BY .................................78 YS-W250P ..........................86, 246
SAD-28......................................303 UGC cables...............................335 VCL-S02WEAP .........................248 YT-B21 ......................................247
SAD-700....................................303 UP-2100P..................................206 VCL-S03XEA.............................248 Z
SC-M800 ...................................315 UP-2330P/2300P ......................205 VCL-S03XM ..............................248 ZBB and ZSV ..............................87
SEG-2550AP.............................103 UP-2850P/2800P ......................204 VCL-S06XEA.............................248
SIC-10 .......................................172 UP-5600MDP ............................203 VCL-S06XM ..............................248
SIC-M cables.............................334 UP-7300MDP ............................202 VCL-S12XEA.............................248
SIC-S20/S21/S22 ......................172 UP-895CE .................................209 VCL-S12XM ..............................248

–347–