Scribd
Upload
66 views

Comparison Danfoss & Siemens

The document compares the specifications of frequency converters from Siemens and Danfoss. Both converters have 3-phase AC input and output, can operate from 380-480V, and have output frequencies from 0-550Hz and 0-590Hz respectively. They provide analog and digital I/O, with the Danfoss having 12-bit analog resolution and 6 digital inputs configurable as outputs.

Uploaded by

sales.honestco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

Comparison Danfoss & Siemens

The document compares the specifications of frequency converters from Siemens and Danfoss. Both converters have 3-phase AC input and output, can operate from 380-480V, and have output frequencies from 0-550Hz and 0-590Hz respectively. They provide analog and digital I/O, with the Danfoss having 12-bit analog resolution and 6 digital inputs configurable as outputs.

Uploaded by

sales.honestco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BRAND SIEMENS DANFOSS

INPUT
Number of phases 3 AC 3 AC
Line voltage(L1,L2,L3) 380 ... 480 V +10 % -20 % 380-480 V AC
Line frequency 47 ... 63 Hz 50/60 Hz
Line Harmonics IEC 61000-3-12 with Rsce = 120. Meets EN 61000-3-12
OUTPUT
Number of phases 3 AC 3 AC
Output voltage(U,V,W) 0 ... line voltage x 0.97 0 – 100% of supply voltage
Output frequency 0 ... 550 Hz 0 … 590 Hz
Power factor(λ) 0.90 ... 0.95 ≥ 0.9
Offset Power factor 0.99 > 0.98
ANALOG INPUT
2 (AI 0 ... AI 1) Differential input • 12-bit
Analogue inputs resolution • 13 ms 2
response time
Modes Voltage or current Voltage or current
Voltage level 0 to +10 V or -10 V (scaleable) 0 to +10 V (scaleable)
Current level 0 to 20 mA (scaleable) 0/4 to 20 mA (scaleable)
ANALOG OUTPUT
1 (AO 0) • Programmable
Not isolated analogue outputs 1
• 16-bit resolution Current range at
• Switchable between voltage and current via analogue output 0/4-20 mA
parameter setting: Max. load to common at
Analogue Outputs – 0 ... 10 V analogue output (clamp 30) 500 Ω
Min. burden 10 kΩ
– 0/4 ... 20 mA
Max. burden 500 Ω
• Update time: 4 ms
• <400 mV offset at 0 %
DIGITAL INPUT
6 (DI 0 … DI 5) Electrically isolated Programmable digital inputs 6*
• Type 3 in accordance with EN 61131-2 Changeable to digital output 2 (terminal 27, 29)
• Voltage for "low" state: < 5 V Logic PNP or NPN
• Voltage for "high" state: > 11 V Voltage level 0-24 V DC
• Current for 24 V input voltage: 4 mA Maximum voltage on input 28 V DC
• Minimum current for the "high" state: 2.5 mA Input resistance, Ri Approx. 4 kΩ
Digital Input
• Maximum input voltage: 30 V Scan interval 5 ms
• PNP/NPN switchable
• Compatible to SIMATIC outputs
• 10 ms response time for debounce time p0724 =
0

DIGITAL OUTPUT
1 (FB_Ax, FB_Bx) 30 V DC 0.5 A, for resistive load Programmable
,Overvoltage category: III (Not for corner grounded digital/pulse outputs 2
network Voltage level at
380-480V AC digital/frequency output 0-24 V DC
Digital Output
Max. output current
(sink or source) 40 mA
Maximum output frequency at
frequency output 0 to 32 kHz
PULSE INPUT
Programmable pulse inputs 2 2
Voltage level 0-24 V 0-24 V DC (PNP positive logic)
Pulse input accuracy 4.0 kHz(automatically reduce high or low ) 0.1 -1.0 kHz

You might also like