( 8 0 0 ) 910 - 4 2 95 | w w w. h a w k - e y e .

c o m

VENTING | D E D I C AT E D V E N T
SERIES 6000 P VRV

Features
• Direct-acting pressure and vacuum relief vent (PVRV)
• Patented Unidirectional Binary Relief (UBR) valve technology offers higher flow rates with less overpressure
while offering flutter-free operation.
• Offered in multiple connection sizes with flexible pressure and vacuum relief settings in a wide array of
pressure + vacuum and pipe-away configurations.
• Soft Viton gaskets to combat fugitive emissions, with four-point pallet guides for repeatable reseating, and
bubble-tight sealing up to 90% of set pressure.
• Flow rates third-party verified.
• Made and stocked in Canada.
2 venting  |  dedicated vent  |  series 6 0 0 0 pvrv

F E AT U R E S
Direct Acting Pressure and Vacuum Relief Vent Precision Components
• The Series 6000 is actuated by tank pressures and • Precision molded and machined sealing
vacuums directly. No external instrumentation or components provide consistent sealing and venting
controls required. performance.
• Relief values set via weights on valve pallets, and • Glass-filled Nylon pallets and seats provide
adjustable in 0.5 ozsi [0.22 kPa] increments. excellent chemical, corrosion, temperature and
wear resistance while remaining light, strong and
Optional UBR Valve extremely durable.
• Patented¹ UBR technology can achieve a higher
fraction of rated relief capacity as compared Full Encompassing Guide
to a standard direct-acting valve at lower • The full encompassing pallet guide on the Series
overpressures. 6000 PVRV provides full confidence that the
internal moving components will not become
• Recommended for use only when you require high
dislodged or misaligned.
relief flow rate at low overpressure, or require a set
points outside the range of a standard valve. • 4 point contact reduces friction, wear and the risk
of becoming stuck over a full contact guide.
• Both the pressure and vacuum valves in the
vent can be configured as Hawkeye’s patented Empirical Flow Characteristic Data
Unidirectional Binary Relief (UBR) valve or as a • Data used to determine the pressure and vacuum
standard weight-loaded direct-acting valve. relief flow rates was generated from full-scale flow
characteristic determination conducted on all vents
Flexible Configuration
in the summer of 2017.
• The Series 6000 PVRV is available in 2, 3, 4 and
6” ANSI 150# FF connections. • All data was collected and verified by C-FER
Technologies (1999) Inc. in accordance with API
• 8” API 12B/F (gauge hatch) connections are also
2000, 7th Ed. Full report available upon request.
available, sharing the flow characteristic of the 6”
ANSI 150# device. Design, Manufactured and Stocked in Canada
• The PVRV can be configured as an end-of- • The Series 6000 is manufactured and stocked for
line vent, with pressure and vacuum relief to quick delivery at Hawkeye’s Edmonton plant.
atmosphere, or optionally as an in-line vent with
pressure relief to an integral 6” ANSI 150# pipe-
away connection.
• The device can be configured to provide both
pressure and vacuum relief, pressure relief only or
vacuum relief only.

Composite FKM Gasket

• The composite gasket bonds sponge Viton™
(eFKM), to standard Viton™ (FKM) for durability.
• The soft eFKM conforms to the contoured seat
improve the seal while the standard FKM ensures
ruggedness and reliability of the gasket.
• Bubble-tight sealing to 90% of set pressure is
achievable.

Series 6000 PVRV mounted on flow test apparatus, June 2017.

Photo courtesy C-FER Technologies (1999) Inc.
¹ Patented US10,208,866 CAN2,955,724
venting  |  dedicated vent  |  series 6 0 0 0 pvrv 3

S P E C I F I C AT I O N S
Function Pressure + Vacuum Relief Vent (PVRV)
Operating Principle Standard (STD) Unidirection Binary Relief (UBR)
Direct-acting Valve, Weight-loaded pallet Hybrid Direct-acting / Pilot Operated Valve
Maximum allowable pressure 4 psig [28 kPag]
Pressure Relief Set Range 0.25 ozsi to 16 ozsi [0.22 kPa to 10 kPa] 8 ozsi to 32 ozsi [0.22 kPa to 14 kPa] 1
Vacuum Relief Set Range 0.25 ozsi to 8 ozsi [0.22 kPa to 10 kPa] 4 ozsi to 16 ozsi [0.22 kPa to 14 kPa] 1
Relief Setting Accuracy ±5% ±10%
Leakage Rate (Typical)² < 1 SCFH [< 0.03 Nm3/hr] @ 90% of set < 1 SCFH [< 0.03 Nm3/hr] @ 90% of set
0 SCFH [ 0 Nm3/hr] @ 75% of set 0 SCFH [ 0 Nm3/hr] @ 75% of set
Reset Pressure At Relief Setting (approx) At 70% of Relief Setting (Approx.)
Process Connection 3
2”, 3”, 4” or 6” ANSI/ASME 16.5 150# FF Flange
8” API 12B/F Gauge Hatch Flange
Temperature Range -26°C to 204°C [-15°F - 400°F] for FKM (Viton) 4
1
Although the UBR valve can have settings as low as 0.5 ozsi, it is strongly recommended to use in the indicated range for best sealing performance.
2
When equipped with standrd eFKM + FKM composite seals. Other seal options may not meet the leak rate requirements of API 2000 in some situations.
3
All Series 6000 vents are furnished with Flat-Face (FF) connections. For low pressure tank equipment, connecting Raised-Face (RF) to FF flanges is allowed, provided the Hawkeye-supplied FF
elastomeric gasket is used and the fasteners are torqued per the Hawkeye installation instruction for the specific venting product.
4
Temperatures provided are continuous service temperatures for the indicated seal materials. Powercoating may lose abrasion resistance starting at 100°C[212°F].

U N I D I R E C T I O N A L B I N A R Y R E L I E F ( U B R ) T E C H N O L O GY
120%

Hawkeye’s patented UBR valve technology com-

bines the ease and simplicity of a weight-loaded 100%

pallet device with precise “off-on” operation of

U B R R E L I E F A DVA N TAG E
OF RELIVING CAPACITY AT 200% OF VALVE
RELIEVING FLOW RATE AS A PERCENTAGE

OV E R S TA N D A R D VA LV E
SET PRESSURE (100% OVERPRESSURE)

a pilot-controlled valve. UBR technology opens 80% UB

R V
A LV E

the valve quicker and more fully in comparison to VA

LV
E

RD
conventional direct-acting valves at same frac- 60% UB
R CL
O SE

ST
A ND
A

tional overpressures up to the rated flow capacity.

The UBR valve uses the process pressure itself to 40%
U B R B LOW D OW N

assist in valve operation, and does not require A DVA N TAG E

any external controls or instrumentation. It is a 20% Adapted from data collected through

complete, intrinsic capability available on Series

full-scale flow testing conducted June 2017
UBR OPEN

by C-FER Technologies (1999) Inc.

6000 PVRVs.
UBR Valve: 4” PUVU @ 16 ozsi Relief.
STD Valve: 4” PSVS @ 16 oszi Relief.
0%
60% 80% 100% 105% 120% 140% 160% 180% 200%

Operation
INLET PRESSURE AS A PERCENT OF THE VALVE SET PRESSURE

Unidirectional Binary Relief (UBR) refers to how

the pallets respond to pressures within the tank or Benefits
process. In the opening direction, the valve acts as a • UBR valves open less frequently, on account of the
binary (off-on) device; and, in the closing direction greater difference between opening and closing
it operates like a traditional direct-acting valve. Al- pressures (blowdown). As a result, the vent has
though the UBR valve has the same rated relief capac- reduced flutter, and is less prone to freezing due to
ity at 100% overpressure (i.e. 2x relief setting) as a emitted condensation.
conventional PVRV with standard valves, it achieves • In high-flow applications, UBR valve-equipped
a higher percentage of that rated flow rate with less PVRVs can achieve higher pressure and vacuum set
overpressure (see chart). points, provided normal operating pressures and/
At just 5% over the set relief pressure the UBR valve is or vacuums are less than 70% of the set point.
already venting approximately 65% of its rated relief • PVRVs with UBR valves achieve higher flow
capacity, compared to just 45% for the standard valve. rates than a comparable standard valve at low
As inlet pressure decreases, the pallet gradually resets, overpressures, however a standard valve maintains
reseating and closing the valve at approximately 70% better sealing performance near the set pressure of
of the set pressure. the valve.
4 venting  |  dedicated vent  |  series 6 0 0 0 pvrv

C O N F I G U R AT I O N S

PRESSURE + VACUUM RELIEF

DEVICE

PSVS (6x01) PUVU (6x00) PUVS (6x02) PSVU (6x03) PSPAVS (6x11) PUPAVU (6x10) PUPAVS (6x12)
CONNECTION 2 — 6 ANSI 150#, 8 API 12B/F 1
OUTLET ATMOSPHERE ATMOSPHERE ATMOSPHERE ATMOSPHERE 6 ANSI 150# 2 6 ANSI 150# 2 6 ANSI 150# 2
PRESSURE VALVE STD UBR UBR STD STD UBR UBR
VACUUM VALVE STD UBR STD UBR STD UBR STD
PRESSURE RELIEF 0.25 TO 16 OZSI 8 TO 32 OZSI 8 TO 32 OZSI 0.25 TO 16 OZSI 0.25 TO 16 OZSI 8 TO 32 OZSI 8 TO 32 OZSI

VACUUM RELIEF 0.25 TO 8 OZSI 4 TO 16 OZSI 0.25 TO 8 OZSI 4 TO 16 OZSI 0.25 TO 8 OZSI 4 TO 16 OZSI 0.25 TO 8 OZSI

¹ Inlet diameter on 8” API connection is 6”, and shares flow characteristic of the 6 ANSI 150# Device

DIMENSIONS, WEIGHTS AND MOUNTING

PSVS, PUVU, PSVU, PUVS PSPAVS, PUPAVU, PUPAVS, PSPAVU
L W LPAV WPAV

HUBR|PAV

HSTD HUBR

HCLPA
LCLPA

HSTD|PAV

B F F
B

Dimension Value Dimension Value

[in] [mm] [in] [mm]

B Vacuum Inlet Clearance 1.6 41 HUBR|V Vacuum only, UBR Valves 14.5 368
Height HCLPA Mount Flange to PA CL 13.5 343
HSTD Pressure + Vacuum, STD 20.6 523 Length
HUBR Pressure + Vacuum, UBR s 21.3 541 L Length, Pressure + Vacuum 19.6 498

HSTD|P Pressure only, STD 16.0 406 LPA Length, Pressure only Pipe-away 13.6 345

HUBR|P Pressure only, UBR 16.7 424 LPAV Length, Pressure + Vacuum Pipe-away 22.1 561

HSTD|PA Pressure only Pipe-away,STD 16.2 411 LV Length, Vacuum only 18.5 470

HUBR|PA Pressure only Pipe-away, UBR 16.9 429 LCLPA Length, Flange CL to PA Face 8.63 219

HSTD|PAV Pressure Pipe-away + Vacuum, STD 20.9 531 Width

W, WP Width, Pressure + Vacuum & Pressure only 12.2 310
HUBR|PAV Pressure Pipe-away + Vacuum, UBR 21.6 549
WPAV Width, Pressure + Vacuum Pipe-away 11 279
HSTD|V Vacuum only, STD Valves 13.8 351
WV Width, Vacuum Only 10 254
 venting  |  dedicated vent  |  series 6 0 0 0 pvrv 5

PRESSURE RELIEF ONLY VACUUM RELIEF ONLY

DEVICE

PSPAVU (6x13) PS (6x24) PU (6x25) PSPA (6x34) PUPA (6x35) VS (6x46) VU (6x47)
2 — 6 ANSI 150#, 8 API 12B/F 1 CONNECTION
6 ANSI 150# 2 ATMOSPHERE ATMOSPHERE 6 ANSI 150# 2 6 ANSI 150# 2 ATMOSPHERE ATMOSPHERE OUTLET
STD STD UBR STD UBR N/A N/A PRESSURE VALVE
UBR N/A N/A N/A N/A STD UBR VACUUM VALVE
0.25 TO 16 OZSI 0.25 TO 16 OZSI 8 TO 32 OZSI 0.25 TO 16 OZSI 8 TO 32 OZSI N/A N/A PRESSURE RELIEF
4 TO 16 OZSI N/A N/A N/A N/A 0.25 TO 8 OZSI 4 TO 16 OZSI VACUUM RELIEF
² Adapters from 6 ANSI 150# outlet to other connections available

PS, PU, PSPA, PUPA VS, VU

WP LPA LV WV

HUBR|P HUBR|PA HUBR|V

HSTD|P HSTD|PA HSTD|V

HCLPA
LCLPA

F F F
B

Device Weight, no weight plates (lb [kg]) Device Weight, no weight plates (lb [kg])
Device 2” 3” 4” 6” / 8” API Device 2” 3” 4” 6” / 8” API
Pressure + Vacuum PUPA 28 [12.7] 28.5 [12.9] 29 [13.1] 30.5 [13.8]
PSVS 32 [14.5] 33 [14.9] 33.5 [15.2] 35 [15.8] VS 24 [10.9] 25 [11.3] 25.5 [11.5] 27 [12.2]
PUVU 34 [15.4] 35 [15.8] 35.5 [16.1] 37 [16.7] VU 25 [11.3] 26 [11.8] 26.5 [12] 28 [12.7]
PSVU 33 [14.9] 34 [15.4] 34.5 [15.6] 36 [16.3]
PUVS 33 [14.9] 34 [15.4] 34.5 [15.6] 36 [16.3]
Pressure Pipe-away + Vacuum
PSPAVS 41 [18.6] 42 [19] 42.5 [19.2] 44 [19.9]
PUPAVU 43.5 [19.7] 44.5 [20.1] 45 [20.4] 46.5 [21] Mounting
PUPAVS 42 [19] 43 [19.5] 43.5 [19.7] 45 [20.4] DIM 2” 3” 4” 6” 8”
PSPAVU 42 [19] 43 [19.5] 43.5 [19.7] 45 [20.4] STD ANSI B16.5 150# API 12B/F
BCD 4.75 6.00 7.50 9.50 10.38
PS 18 [8.14] 18.5 [8.37] 19 [8.6] 20.5 [9.28] # Bolts 4 4 8 8 16
PU 19 [8.6] 19.5 [8.82] 20 [9.05] 21.5 [9.73] Hole Ø 3/4 3/4 3/4 7/8 9/16
PSPA 27 [12.2] 27.5 [12.4] 28 [12.7] 29.5 [13.3] F 6.0 7.5 9.0 11.5 11.5
6 venting  |  dedicated vent  |  series 6 0 0 0 pvrv

PA R T S L I S T
PRESSURE VALVE - UBR
49

57

59

PRESSURE BODY
(PSPA, PUPA ONLY) 16
ITEM 37 - 40 PRESSURE VALVE - STD
54
15
57
22
58

PRESSURE BODY 28
15
(PS, PU ONLY)
ITEM 33 - 36
12

51 45

PRESSURE + VACUUM BODY REPLACES PRESSURE

24
(PSPA-, PUPA-, VS & VU) 31 VALVES (PS, PV ONLY)
58
ITEM 5 - 8 52
48
20 59
10
25 32
17 44
60 21
48
53
22 29
59
21
28 23
30
29
13 14

47 23
45 18

27
20 11
21 PRESSURE +
14
9 VACUUM BODY
(PSVS, PUVU, 46
29
PSVU, PUVS) 18
47 ITEM 1 - 4
23

26 11
11
21 41
46
46
29 VACUUM VALVE - STD 52

23 19 50 58 59

11 48
PIPEAWAY
VACUUM VALVE - UBR (REPLACES 14, 15 & 18)
46

Item Part Name Item Part Name Item Part Name

1 PVRV Base - 2 ANSI 150# 21 Relief Pallet 41 Pipe Away Body
2 PVRV Base - 3 ANSI 150# 22 Pilot Pallet 42 Pipe Away Pressure Cover
3 PVRV Base - 4 ANSI 150# 23 Lower Pallet Guide Rod 43 Pressure Pilot Pallet Seat Holder (PA)
4 PVRV Base - 6 ANSI 150# 24 Pressure Pallet Center Guide Rod 44 Vapour Control Tag
5 PVRV Base - 2 ANSI 150# PA 25 Pressure Pallet Top Guide Rod 45 153 O-Ring Viton
6 PVRV Base - 3 ANSI 150# PA 26 Vacuum Pallet Center Guide Rod 46 164 O-Ring Viton
7 PVRV Base - 4 ANSI 150# PA 27 Vacuum Pallet Top Guide Rod 47 261 O-Ring Viton
8 PVRV Base - 6 ANSI 150# PA 28 Composite Pilot Gasket 48 266 O-Ring Viton
9 Vacuum Pilot Pallet Seat Holder 29 Composite Relief Gasket 49 3/8-16 UNC x 0.625 SS Hex Bolt
10 Pressure Pilot Pallet Seat Holder 30 Vacuum Cover 50 1/4-20 UNC x 0.5 SS Hex Bolt
11 Relief Pallet Seat 31 Pressure Cover 51 1/4-20 UNC x 1.25 SS Hex Bolt
12 Pressure Pilot Pallet Seat 32 Vacuum-only Cover 52 3/8-16 UNC x 0.75 SS Hex Bolt
13 Vacuum Pilot Pallet Seat 33 Pressure-only Base 2 ANSI 150# 53 1/4-20 UNC x 0.875 SS Hex Bolt
14 Pressure Stand-off 34 Pressure-only Base 3 ANSI 150# 54 3/8-16 UNC x 0.5 SS Hex Bolt
15 Pressure Hood 35 Pressure-only Base 4 ANSI 150# 55 3/8-16 UNC x 0.875 SS Hex Bolt
16 Pressure Cap 36 Pressure-only Base 6 ANSI 150# 56 3/8-16 UNC x 1 SS Hex Bolt
17 Vacuum Hood 37 Pressure-only Base 2 ANSI 150# PA 57 3/8-16 UNC SS Hex Nut
18 Pressure Screen 38 Pressure-only Base 3 ANSI 150# PA 59 3/8 SAE SS Flat Washer
19 Vacuum Screen 39 Pressure-only Base 4 ANSI 150# PA 58 1/4 SAE SS Flat Washer
20 Guide Insert 40 Pressure-only Base 6 ANSI 150# PA 60 #4 x 5/16 ZP Drive Screw
venting  |  dedicated vent  |  series 6 0 0 0 pvrv 7

FLOW CHAR ACTERISTIC

All Series 6000 PVRV configurations
and valve types have flow character-
istic information available for sizing
purposes.
Relieving rates and behavior deter-
mined empirically in accordance with
a test regime in consideration of API
2000 7th Ed from data collected
and verified by C-FER Technolo-
gies (1999) Inc. Their third-party test
report outlining the apparatus, proce-
dure, error propagation and other
experimental considerations avail-
able upon request.
Analysis of the data and presenta-
tion of relief rates and behavior is the
product of Hawkeye Industries Inc.,
based on API 2000 7th Ed section Full-scale flow characterization apparatus, June 2017.
5.3.2.1. Photo courtesy C-FER Technologies (1999) Inc.

LEAK TESTING PA C K A G I N G
Series 6000 PVRVs are tested per Series 6000 PVRVs are shipped complete and boxed.
API 2000 7th Ed section 5.4 for TEST Inside the carton separate boxes for the weights, docu-
AK
pressure-tightness, relief setting ac- mentation and connection accessories.
ED
LE

curacy and leak rate. Items passing Weight varies with configuration between 44 and 100
the quality control measures are PA S S
•
•

lb [20 to 46 kg]. Two person lift is strongly recom-

marked with the label at right. mended.

VENT MARKING
Series 6000 PVRVs are tagged permanently with the
the information illustrated on the tag below, per API
2000 7th Ed, Section 6.

22

24
14
8 venting  |  dedicated vent  |  series 6 0 0 0 pvrv

O R D E R I N G I N F O R M AT I O N
PVRVs are assembled from stocked components for target delivery in under 2 weeks. Configure your desired vent
using the part number legend below, and contact your Hawkeye sales rep to place an order. Items in bold are
standard items. All PVRVs ship complete with a CR/Neoprene base gasket and Gr. 5 bolt kit standard.
Size & Configuration Relief Setting Options

PVRV  6 A B C  D D D E E E  F G H J

[A] Size [D] Pressure* [E] Vacuum*

Size Flag Setting Setting
Flag Flag
[C] Valve Type (ozsi) (ozsi)
2 in. 2
Pressure Vacuum Flag n/a 000 n/a 000
3 in. 3 [F] Bolt Pattern
UBR UBR 0 0.25 002 0.25 002
4 in. 4 Configuration Flag
STD STD 1 0.4 †
004 0.4 †
004
6 in. 6 ANSI B16.5 150# FF 0
UBR STD 2 0.5 005 0.5 005
8 in.‡ 8 API 12B/F 650 (req for 8”) 1
‡
STD UBR 3 1.0 010 1.0 010
8 API connection [G] Pallet & Seat Material
STD NONE 4 …

…
only. Same Throat
Configuration Flag
dimension and UBR NONE 5 31.0 310 15.0 150
flow capacity as Glass-filled Nylon 0
6” ANSI Device. NONE STD 6 31.5 315 15.5 155
NONE UBR 7 32.0 320 16.0 160 [H] Body Material / Coating
Configuration Flag
[B] Relief Type * Allowable Pressure Ranges Bare Aluminum 0
Configuration Flag Pressure (ozsi) Vacuum (ozsi)
Min Max Inc. Min Max Inc.
Severe Service (Teflon) Coating 1
Pressure + Vacuum 0
Pressure Pipe-away + Vacuum 1 Standard Valve 0.25 16 0.5 0.25 8 0.5 [J] Seal Material
Configuration Flag
Pressure only 2 UBR Valve 8.0 32 0.5 4.0 16 0.5
eFKM + FKM composite seals 0
Pressure only Pipe-away 3 †
0.4 ozsi setting available on Standard Valve only. ePTFE (Sponge Teflon)† (STD VALVE ONLY) 1
Vacuum only 4
FEPM (Aflas) Seals† (STD VALVE ONLY) 2
Gasket Bolting Kit CR (Neoprene) Seals† (STD VALVE ONLY) 3
VCGA  C C C M  T VCBK  C C C M  0 †
Valves equipped with solid elastomer or expanded polymer seals may not meet API 2000
leak rate requirements, and are not available with UBR valve configurations.

Examples
[CCC] Size Code [CCC] Size Code Series 6000 PVRV, 3” ANSI 150#
Connection Size Flag Connection Size Flag Pressure UBR + Vacuum UBR,
2” ANSI 150# FF 025 2”& 3” ANSI 150# 021 16 ozsi / 0.5 ozsi relief, STD Trim
Grade 5 Bolts, CR Base Gasket
3” ANSI 150# FF 035 4” ANSI 150# 041 PVRV-6300-160005-0000
& VCBK-0215-0 + VCGA-0350-0
4” ANSI 150# FF 045 6” ANSI 150# 061
Series 6000 PVRV, 4” ANSI 150#
6” ANSI 150# FF 065 8” API 12B/D/F 080 Pressure Pipe Away Std + Vacuum UBR,
8 ozsi / 0.5 ozsi relief, STD Trim
8” API 12B/D/F 080 Grade 8 Bolts, FKM Base Gasket
[M] Material PVRV-6413-080005-0000
Grade Flag & VCBK-0418-0 + VCGA-0451-0
[M] Material Bolt kits include, Hex Cap Screws, Nuts,
Gr. 5 5 Washers, and are sized per the relevent
standard and have length to
Grade Flag Series 6000 PVRV, 8” API
[T] Thickness Gr. 8 8
accomodate a standard thickness
Pressure Std + Vacuum Std,
CR (Neoprene) 0 mounting flange and gasket. Contact us
Grade Flag for non-standard lengths. 12 ozsi / 0.4 ozsi relief, STD Trim
FKM (Viton) 1 18-8 S.S G
1/8” 0 Grade 5 Bolts, 1/4” Viton Base Gasket
PVRV-6801-080004-1000
FEPM (Aflas) 3 1/4” 1 & VCBK-0805-0 + VCGA-0801-1
Refer to the Venting - Connection Accessories brochure for more information on bolt
Tank gaskets are flat-face and sized to match the relevant standard. 1/8” thick kits, gaskets as well as mounting options available for the Series 5000 EPRV.
gaskets stock in most materials.

R E L AT E D P R O D U C T S
Series 5000 EPRV
The Series 6000 PVRV is just part of the tankage product lines from Hawk-
eye Industries, which also include:
Vapor Control Mechanical Level Indication
• Series 5000 EPRV • Model 1000 Redtail Hawk &
Model 1500 Roadside Hawk
• Series 4000 Marsh Hawk TRV
Dry Seal Level Gauging System
• Model 200 and 300 TVTH Thief
• Model 750LS and Model 375LS
Hatches
Liquid Seal Level Gauging Systems
2110 70 Ave NW
Edmonton, AB, Canada T6P 1N6
Toll Free: (800) 910-4295
Phone: (780) 490-4295
Contents © 2006 - 2022 Hawkeye Industries Inc. This document is uncontrolled, and is subject to change without notice. Please
Fax: (780) 490-4290
refer to www.hawk-eye.com for the most up-to-date product information.
www.hawk-eye.com
Printed in Canada.
VENTING - SERIES 6000 PVRV 02Sep2022