ACMV Course Flyer 2023
ACMV Course Flyer 2023
REGISTRATION FEE
(inclusive of 6% SST) :
MASHRAE Member : RM 954
Non MASHRAE Member : RM 1060
Biodata of Speaker
Ir. NG YONG KONG
• Ir. Ng Yong Kong has a B.Eng. (Hons in Mech.)1985 from University of Malaya,
Kuala Lumpur and an MBA (Hull, UK) 1997. He has more than 38 years
experience in the HVAC industry having worked as a System and Application
Engineer in two major chiller manufacturers, air diffusion and a control company.
• He was the Council Member of the Institution of Engineers, Malaysia (IEM) for
2019 – 2022 and was ASHRAE Director and Regional Chair (DRC) for Region XIII.
He is a PEPC registered with the Board of Engineers, Malaysia (BEM) and is also
the Council Member for Malaysia Green Building Council 2019 – 2022.
• He is a working group member for JKR/SIRIM Standard for IEQ in office buildings
2021, Guidance Note on Ventilation and IAQ for Non-Residential Setting and
Industry Code of Practice on Indoor Air Quality 2022 under DOSH. He is currently
the Malaysia Green Building Index Facilitator (GBIF), trainer and examiner. He is a
Frequent lecturer/trainer for HVAC System Design since 1990 for ASHRAE
Malaysia Chapter, Association of Consulting Engineers, Malaysia ( ACEM), JKR
HQ, JKR Sarawak and MGBC.
• Ir. Ng is the Director of NYKK Engineering Group S/B and was also the Past
President for Malaysia Air-Conditioning and Refrigeration Association ( MACRA )
2001-2003. He is also a qualified HRDF trainer since 2014.
Day 1 Program
Time Topic Duration
9.00-10.30am Chapter 1: Introduction to Air Conditioning & Mechanical Ventilation 1Hr 30Min
- Principle of Refrigeration
- Psychometrics
- Cooling Load Estimation & Software
- Refrigerant Issue
- Type of Air Conditioning system (Introductory)
- Type of Mechanical Ventilation System (Introductory)
10.30-10.45am Morning Tea Beak 15Min
3.45-5.15pm Chapter 4: Understanding Cooling Load & Load Profile 1Hr 30Min
- Peak Cooling Loads
- Diversity Factors
- Base Cooling Loads
- Phantom Loads
- Full Load and Part Load Operation
- Chillers Configuration
- Peak Load Shaving
5.15-5.30pm Question & Answer 15Min
Day 2 Program
Time Topic Duration
Intake 1: 8-9 Mar 2023 Intake 2: 5-6 Jul 2023 Intake 3: 8-9 Nov 2023
GRAND TOTAL
TOTAL PAYABLE
I/We understand that the fee is not refundable if I/We withdraw after my/our
registration is accepted by the Committee but substitution of participants will be
allowed. If I/We fail to attend the Seminar the fee paid would not be refunded.