Scribd
Upload
1K views

Lancing

Lancing is a process that modifies sheet metal geometry by shearing and bending the material with a die strike, without removing material. It can be used to make partial contours and free up material for other operations. Common features made by lancing include tabs, vents and louvers. Minimum depths, distances and spacings are recommended to ensure the lancing operation is successful without damaging the workpiece or tools.

Uploaded by

k.prasad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

Lancing

Lancing is a process that modifies sheet metal geometry by shearing and bending the material with a die strike, without removing material. It can be used to make partial contours and free up material for other operations. Common features made by lancing include tabs, vents and louvers. Minimum depths, distances and spacings are recommended to ensure the lancing operation is successful without damaging the workpiece or tools.

Uploaded by

k.prasad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LANCING

Lancing is a piercing operation in which the work piece is sheared and bent with strike of a die. In this
process there is no material removal however it only modifies the geometry.

Lancing can be used to make partial contours and free up material for other operations.

Lancing is used to make tabs, vents and louvers.

Minimum Depth of Lance: [H=2xt]

It is recommended that the minimum depth of lance should be H=2xt the material thickness.

Minimum Distance from Bend to Lance: [D=10t+r]

During lancing operation, a sufficient degree of clearance should be given around the lance feature
and bend.

It is recommended that minimum distance between lance and bend should be 10x the material
thickness plus bend radius. D=10t+r (min. D=3t+r)

t = Sheet metal thickness r = Inside bend radius

Minimum Distance from Hole to Lance:[ D=3t]


During lancing operation, we need to maintain sufficient degree of clearance around the lance
feature. It is recommended that the distance between lance and hole should be 3X the material
thickness. D=3t

t = Sheet metal thickness

Minimum Spacing between Lances:

During lancing operation sufficient degree of clearance should be maintained around the lance feature
as the punch and die will need some degree of clearance around the feature in order to hold down the
work piece during operation. If another lance is placed inside this working envelope, it will be crushed
by the punch and die, potentially damaging the work piece and tools. It is recommended to maintain
sufficient clearance between two lance features by considering die and punch clearance allowance.

You might also like