Scribd
Upload
79 views

Technical Drawings of Major Materials of Rdss Phase1 Works: (Adopted From Approved Ksebl Specifications)

The document contains technical drawings and specifications for materials used in the RDSS Phase 1 works including 33kV covered conductor, accessories, composite insulators, lightning arrestors, A poles, lattice structures, foundations, pre-fabricated items, stay insulators and 11kV pin insulators.

Uploaded by

isan.structural Tjsvgalavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

Technical Drawings of Major Materials of Rdss Phase1 Works: (Adopted From Approved Ksebl Specifications)

The document contains technical drawings and specifications for materials used in the RDSS Phase 1 works including 33kV covered conductor, accessories, composite insulators, lightning arrestors, A poles, lattice structures, foundations, pre-fabricated items, stay insulators and 11kV pin insulators.

Uploaded by

isan.structural Tjsvgalavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 38

TECHNICAL DRAWINGS OF MAJOR MATERIALS OF RDSS

PHASE1 WORKS

(ADOPTED FROM APPROVED KSEBL SPECIFICATIONS)

1
TECHNICAL DRAWINGS OF MAJOR MATERIALS OF RDSS
PHASE1 WORKS
(ADOPTED FROM APPROVED KSEBL SPECIFICATIONS)

Table Of Contents
Sl No Description Page No

1 33kV COVERED CONDUCTOR 3

2 33kV COVERED CONDUCTOR ACCESSORIES- 4

3 33kV COMPOSITE INSULATORS 13

4 33kV LIGHTNING ARRESTER 14

5 A POLE & LATTICE 22

6 FOUNDATION DETAILS OF APOLE & LATTICE 28

7 PRE-FABRICATED ITEMS 31

8 HT STAY INSULATOR & LT SHACKLE 35

9 11kV POLYMERIC PIN INSULATOR 37

2
1.Technical Drawings of 33kv Covered Conductor

Aluminium alloy wires


Extrude, Semi conductor layer

UV-resistant XLPE

Covering (Insulation) of XLPE, without carbon black

Extrude, longitudinal water blocking layer

3
2.Technical Drawings of 33kv Covered Conductor Accessories

Tension Assembly (TA) with Anchoring clamp and one Tracking protection IPC

Non Metallic Alignment Tie (AT)

Suspension Clamp (SC)

4
Insulation Piercing Connector for Networking / Branching /Looping, Insulation Pierc-
ing Connector with Aluminum Bail for earthing and Midspan Joints (TJ)

5
TYPICAL DRAWINGS

Tension Assembly (TA) with Anchoring clamp and one Tracking

6
Protection IPCNon Metallic Alignment Tie (AT)

7
Suspension Clamp (SC)

8
Insulation Piercing Connector for Networking / Branching /Looping

9
Insulation Piercing Connector with Aluminum Bail

10
Mechanical Connector for Bare to Covered connection

11
Insulation Piercing Connector for Bare to Covered connection
Midspan Joints (TJ) for AAAC Covered Conductor

12
3.Technical Drawings of 33kV Pin Insulator with Pin

Packing Clamp 40 x 6 MSF galvanised.


For fitting 33kV Pin Insulator in V Cross arm and ‘F’ top bracket, U clamp with nut,
bolt and Washers for M24 shall be provided.

13
3.Technical Drawings of 33kV Lightening Arrestor

14
15
16
17
18
19
20
21
5.Technical Drawings of A POLE/LATTICE POLE B &C

Angle Sizes & Drawings of 14m A Pole

22
23
Angle sizes and Drawings of 33KV TYPE B Lattice Pole

24
25
Angle Sizes and Drawings of 33KV TYPE C Lattice Pole

26
27
5.Foundation details of A poles & Lattice Structures

FOUNDATION DETAILS OF A POLE

28
FOUNDATION DETAILS OF LATTICE STRUCTURE B TYPE

29
FOUNDATION DETAILS OF LATTICE STRUCTURE C TYPE

30
5.TECHNICAL DRAWINGS OF PRE-FABRICATED ITEMS

31
32
33
34
35
5.TECHNICAL DRAWINGS OF HT STAY INSULATOR & LT
SHACKLE

36
37
5.TECHNICAL DRAWINGS OF 11kV PIN INSULATOR

38

You might also like