Info Sheet

Fumis ALPHA V2
SUPERIOR COMBUSTION
CONTROL TECHNOLOGY
for stoves, burners and low power boilers
with state-of-the-art Flow Control.

Key benefits:
MAXIMUM USER COMFORT
• 100 % operating autonomy
• Prediction of remaining operating hours and
biomass level control
• Effective user communication via intuitive touch
screen interface
• Visually attractive, ergonomic design

ECO FRIENDLY
• Lower fuel consumption
• Lower CO emissions
• Lower particle emissions

COST EFFICIENT
• Lower fuel consumption due to higher efficie
• Lower heating cost due to optimum combustion
in all operating conditions

Product Overview:
FUMIS ALPHA V2 is a superior solution for combustion control of stoves, burners and low power boilers. Its distinctive, user friendly design, unique autonomy
pre diction and customization options help stove manufacturers differentiate their products from competition.
The use of Flow-Control combustion control make devices with FUMIS ALPHA V2 more efficient, saving fuel and diminishing emissions. With Flow-Control the
device operates at optimum efficiency regardless the fuel quality and installation conditions (the actual chimney draught) without fine-tuning at installation. FUMIS
ALPHA V2 controller helps customers decrease combustion device production, R&D, logistics and installation costs with its 13 pre-programmed configurations
and easy-to-mount features. Also, every pre-programmed configuration can be customized, to suite specific appliances.
Info sheet - FUMIS ALPHA V2

Inputs and outputs:

1. Door open switch
2. Pellets level sensor (capacitive switch)
3. LevelTronic
4. Hall speed sensor
5. External thermostat
6. Water temp. sensor (NTC)
7. Air temp. sensor (NTC)
8. Back water temp. sensor (NTC)
9. Secondary room temp. sensor (NTC)
10. Accumulator temp. sensor (NTC)
11. Flame detection sensor
12. Flue gas temp. sensor
13. Air flow sensor (Tube connection)
14. Igniter (max. 450W)
15. Fan 1 as primary Combustion fan
16. Fan 2 as chimney fan or secondary comb. fan
17. Fan 2 as ambient fan
18. Fan 3 as secondary room fan
19. Pellets feeder 1
20. Pellets feeder 2
21. Safety temperature limiter (water) STB
22. Safety temperature limiter (pellets) STB
23. Additional safety switch
Configurations: 24.
25.
Air under pressure safety switch
Water pressure safety switch
26. Water pump
1. Basic Pellet Stove 8. Basic Pellet Burner 27. Back water pump (By-pass)
2. Pellet Stove with 2nd Ambient Fan 9. Pellet Burner with water pump management 28. Modulated water pump (inverter pump)
29. Ash extraction auger
3. Water Stove with automatic chamber cleaning and compressed air cleaning 30. Mechanical chamber cleaning
4. Basic Pellet Boiler 10. Basic Firewood Boiler 31. Air pulse cleaning
5. Pellet Boiler with automatic chamber cleaning 11. Combined Boiler (Firewood/pellets) with 32. Pallet temp. senzor (NTC)
6. Pellet Boiler with Back Water management automatic chamber cleaning 33. LambdaTronic
34. Analog pressure senzor
7. Pellet Boiler with automatic combustion 12. Firewood boiler with back water management 35. Chamber temp. senzor (K-Type)
chamber and ash extraction 13. Customized config. (i.e. Bakery oven burner) A Inductive NPN (NO) sensor
B Inverted pump contact
C External power setting
D Additional relay output
Options:

1. LambdaTronic universal lambda modul

2. Fumis WiRCU WiFi access point
3. Fumis Premium touch screen user interface
4. Fumis IR-RC remote control unit
5. LevelTronic biomass level sensor
6. Fumis Relay artificial load with integrated relay
7. Quick Pro field programming unit
8. Fumis mobile APP (for iOS or Android)

ALPHA V2 60/70 ALPHA V2 65/75

Description: Biomass combustion control electronics. Biomass combustion control electronics
With integrated airflow sensor

Technical characteristics: • 5 multifunction triac outputs 240 VAC 1A • 1 relay output 240 VAC 3A (700W) • 1 modulated water pump output 10V 15mA • 2 multifunction
inputs NTC 10kOHM (water/air temperature sensors) • 2 thermocouple inputs type K (flue gas temperature sensors) • 1 multifunction
temperature input (NTC 10k flame presence sensor) • 2 multifunction sensor inputs (fan speed and pellet level sensor) • 2 multifunction digital
inputs (external thermostat, open door) 240 VAC 500 uA • 2 safety inputs (safety temperature switch – STB, pressure safety switch) 240 VAC
500 uA • RJ45 connector for serial communication • relay output 240 VAC 1A 240W (7th output, only on Alpha V2 70/75)
Functionalities: • Weekly programme • serial communication port As ALPHA V2 60 but with integrated airflow sensor.
• “Fire-memory” • autonomy indication • combined fuel
operation firewood/pellets • water pump control
(ON/OFF or modulated)
User interface: LED display with touch screen keyboard / Fumis Premium
Power supply: 230 VAC, 50-60 Hz (optional 115 VAC)
Dimensions: Controller: 134 x 100 x 38, Controller in plastic BOX: 170 x 108 x 43. User interface: 120 x 63 x 16.
Mounting: Controller: on plastic stand-offs or in plastic box. User interface: panel mount.

DISCLAIMER: “Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your
specifications. Atech makes no representation or warranties of any kind whether express or implied, written or oral, statutory or otherwise, related to the information, including but not limited to its condition, quality, performance, merchantability or fitness
for purpose. Atech disclaims all liability arising from this information and its use. No licenses are conveyed, implicitly or otherwise, under any Atech intellectual property rights.”

ATech elektronika d.o.o. | Bač pri Materiji 30 | SI – 6242 Materija | Slovenia | T: +386 8 200 88 00 | F: +386 8 200 88 01 www.fumis.si | [email protected] | [email protected] | [email protected]