HD/4K Integrated Camera

Interface Specifications

AW-UE100
Apl. 1, 2022

Panasonic Connect Co., Ltd.

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 ■Contents

1. Introduction …3
2. Configulation outline …4
3. Command type …5
4. Communication method …6
5. Update notification …8
6. Special sequences …13
7. Error return …19
8. Menu-Command correspondace Table …21
9. Command List …27

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 1.Introduction
This manual describes the external interface specifications which are applicable when the AW-UE100 is operated.
This manual consists of an overview of the external interface and a description of each command of AW-UE100

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 2.Configuration outline
This manual has the following general configuration.

① Overview of the external interface

It is possible to control the pan, tilt and white balance adjustments.
It is also possible to acquire the gain and other camera information by initiating queries.
The various functions are employed for the operations with the camera using HTTP which is the host protocol of TCP.
For further details, refer to chapter 3 and chapter 4.

②Camera information update notification

The local terminal is notified of the values of the gain and other settings which have been changed at another terminal or other terminals
so that it can acquire the camera information.
This feature is useful when one camera is controlled by a multiple number of terminals, and when the setting for enabling update notifications
to be received has been established, the information which has been changed by other terminals can be acquired.
For further details, refer to chapter 5.

③Camera information batch acquisition

The camera information can be acquired in batch form. Since there is no need to query each and every camera information item when
this feature is used, the feature is useful when all the camera information is required such as at startup.
For further details, refer to chapter 6.

④Error return
An error whether ER1, ER2 or ER3 is returned when an error has been generated by a command in ① above or when the AWB result
contains an error.
For further details, refer to chapter 7.

⑤Menu list and command correspondence table

This table which summarizes AW-UE100 menu list and commands related to each menu item.
For further details, refer to chapter 8.

⑥Control and request command

Describes the specifications of commands used in AW-UE100.
For further details, refer to chapter 9.

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 3.Command type
There are two types of external interface command: Pan/Tilt control commands and camera control command.

3-1.Pan/Tilt control command

This interface controls the pan tilt head.
Starts with # (0x23), and ends with [CR](0x0d)
example）Pan stop command
# P 5 0 [CR]
0x23 0x50 0x35 0x30 0x0D
※[CR] is not required for IP communication

Commands which command type is "ptz"(in chapter 9) are for Pan/Tilt control commands

3-2.Camera control command

This interface is for the camera lens control and image/color adjustments.
Starts with [STX] (0x02), and ends with [ETX] (0x03)
":" letter is required before [Data] for camera Control commands.
example）Auto Focus setting
[STX] O A F : 1 [ETX]
0x02 0x4F 0x41 0x46 0x3A 0x31 0x03
※[STX] and [ETX] are not required for IP communication

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 4.Communication method
The camera can be controled by serial communication and IP communication respectively

4-1.Serial communication
The camera communicates with RS422. The communication specifications are as follows
Method Half Duplex
Commnunication Speed 9600bps
Data bit 8bit
Stop bit 1bit
Parity None
Flow contorol None

▼Sequence of serial communication

In case of Pan/Tilt Control command In case of Camera Control command

PC(ROP) Camera PC(ROP) Camera

#P50 DCB:1

ACK(0x06)

p50 DCB:1

【Restrictions】
1. When using the pan-tilt head control commands, send the commands with a gap of 40 ms between each command. Given below is the sequence.

2. Some settings and conditions may restrict the effects of other settings (※ including those with exclusive control conditions).
See more detail in Capter 8 for the exclusive control conditions

3. Send the commands which change the settings only at the point in time when the changes are required. (Do not send them at regular intervals.)

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 4-2.IP communication
In case of Pan/Tilt Control command In case of Camera Control command
▼Send format ▼Send format
http://[IP Address]/cgi-bin/aw_ptz?cmd=[Command]&res=[Type] http://[IP Address]/cgi-bin/aw_cam?cmd=[Command]&res=[Type]
※IP Address・・・IP address of camera at connection destination ※IP Address・・・IP address of camera at connection destination
※Command・・・・・Details given in “Command” column in Chapter 9 ※Command・・・・・Details given in “Command” column in Chapter 9
※Type・・・・・・・・Fixed at “1” ※Type・・・・・・・・Fixed at “1”

▼Receive format ▼Receive format

200 OK “Command” 200 OK “Command”
※Command・・・Response value of each command; ※Command・・・Response value of each command;
set in the HTTP message body set in the HTTP message body
See more detail in Capter 7 for the error communication sequence See more detail in Capter 7 for the error communication sequence
for the transmitted command for the transmitted command

▼Sequence ▼Sequence

PC(ROP) Camera PC(ROP) Camera

http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23P50&res=1 http://192.168.0.10/cgi-bin/aw_cam?cmd=DCB:1&res=1

200 OK “p50” 200 OK “DCB:1”

※Depending on the browser or middleware used, “#” may have

to be converted to “%23” by ASCII conversion.

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 【Restrictions】
1. When using the pan-tilt head control commands, send the commands with a gap of 40 ms between each command. Given below is the sequence.

2. Keep-Alive cannot be set with HTTP connections.

Connect and disconnect are performed each time a command is sent or received.

3. Some settings and conditions may restrict the effects of other settings (※ including those with exclusive control conditions).
See more detail in Capter 8 for the exclusive control conditions

4. Send the commands which change the settings only at the point in time when the changes are required. (Do not send them at regular intervals.)

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 5.Update notification
The following restrictions apply to camera operations that are performed using HTTP communication and
that have been described in the previous chapters:
A) Even when a camera setting is changed by one terminal, the other terminals will not know that the setting has been changed
unless they send the query command to the camera.
B) In the case of a preset playback, AWB/ABB execution or other control commands that take time to be processed,
it is necessary to wait until the processing is completed for the response.

By sending information autonomously from the camera to the terminals, it is possible to do the following:
A) When a camera setting is changed by one terminal, the other terminals are notified of the setting change immediately.
B) With a control command that takes time to be processed, the HTTP response is returned as soon as the command has been received,
and separate notification of the processing result is given as soon as the processing is completed.
These functions are referred to as the camera information update notification function.
This chapter uses the term “update notification” to refer to this function

5-1.Update notification sequence

When the settings of the camera have been changed from the local terminal (PC1), the changes are also posted
by an update notification separately from the HTTP response to the command.

PC(ROP) PC(ROP) PC(ROP) Camera

DCB:1
Receive control command
DCB:1
Response

DCB:1
DCB:1 Update notification
DCB:1

Some commands are not to be incicated as update notifications. See Chapter:9 for more detail

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 5-2.Data format for update notifications
▼Serial
In the case of Pan/Tilt control command, ends with [CR](0x0d)
In the case of Camera control command, starts with [STX] (0x02), and ends with [ETX] (0x03)

▼IP
The update notification is given to the TCP port on the terminal whose number was specified using the update notification start command
by TCP protocol communication.
A breakdown of the data received is given below.
【Receive data】
Reserve Size Reserve Update notification information Reserve
（22Byte） （2Byte） （4Byte） (Variable length: Max. 504 bytes) （24Byte）

The updated information is set in “Update notification information” of the receive data format.
The data received from the camera has a variable length.
The size of the update notification information is the value obtained by subtracting 8 bytes from the “Size” area setting.
・“Update notification information” data length ＝ “Size” － 8 bytes

【Update notification information format】

[CR][LF][ Command response format ][CR][LF]
※ [CR]：0x0d、[LF]：0x0a

ex1）Power： On
[CR][LF]p1[CR][LF]

ex2）Color bar： On
[CR][LF]DCB:1[CR][LF]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 5-3.Procedure of start/end of the update notifications reception
To receive an update notification via IP, you must perform the update notification reception start process in advance.
At a time like this, the number of the TCP port on the terminal for receiving the update notification (having the update notification sent)
is specified.

① Update notification receive start step

example）When reception is to be started with “192.168.0.10” used as the IP address of the camera
http://192.168.0.10/cgi-bin/event?connect=start&my_port=31004&uid=0
※ my_port … Number of the TCP port on the terminal (any port)

【Update notification receive start sequence】

The update notification receive start command is sent from the terminal where the update notifications are to be received.
“204 No Content” is returned from the camera which has received the command.

PC(ROP) Camera

http://192.168.0.10/cgi-bin/event?connect=start&my_port=31004&uid=0

The port of PC1 where the update

notifications are received is
204 No Content registered as port number 31004.

【Caution】
Proceed with the update notification receive start step when communication has been cut off
because the LAN cable has been disconnected, for example.

② Update notification receive end step

To close the application of the client, the update notification receive end step must be taken without fail.
example) When reception is to be ended with “192.168.0.10” used as the IP address of the camera
http://192.168.0.10/cgi-bin/event?connect=stop&my_port=31004&uid=0
※ my_port … Number of the TCP port on the terminal

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 【Update notification receive end sequence】
The update notification receive end command is sent from the terminal which has received the update notifications.
“204 No Content” is returned from the camera which received the command.

PC(ROP) Camera

http://192.168.0.10/cgi-bin/event?connect=stop&my_port=31004&uid=0

The receiving of the update

notifications at PC is ended
204 No Content

③ Registered number of update notifications

You can query the number of external devices (RP remote controller etc.) connected to the camera with the following command.
The number of connected device increases with the procedure to start receiving update notifications and decreases the procedure
to start receiving update notifications. The number of connected device also decreases when it can not communicate with the device.
Number of terminals which can receive update notifications at the same time: 5
When the remote camera controller is connected, it is counted as one unit.
example) When the IP address of the camera is "192.168.0.10" and you want to request registered number.
http://192.168.0.10/cgi-bin/man_session?command=get

PC(ROP) Camera

http://192.168.0.10/cgi-bin/man_session?command=get

200 OK “Event session:1”

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6.Special sequences
Update notifications are sometimes sent at times other than when the settings or statuses of the camera have been changed.
Some cases are presented below.
It is assumed that the update notification start command has been sent to all the terminals in the sequence
and that the terminals can receive the update notifications from the camera.

6-1.Version information notification

The version information is posted in 60-second cycles.
See QSV in Chapter 9 for notification content

【Sequence when the version information is received】

The camera sends the version information in 60-second cycles, and this information is received by terminals PC1 and PC2.

PC(ROP) PC(ROP) Camera

qSV3V01.00L.002
qSV3V01.00L.002

Notification posted in
60-second cycles
qSV3V01.00L.002
qSV3V01.00L.002

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6-2.Error information
In cases where the camera has detected error information, the error information is posted in 30-second cycles.
When operation has been restored from an error condition, [Error Code 00:Normal] is posted only once.
If the error has not been detected, the error information is not posted.
See #RER in Chapter 9 for notification content

【Error information receive sequence】

When the camera detects an error, it sends the error information to the terminals, and terminals PC1 and PC2 receive this information.

PC(ROP) PC(ROP) Camera

Error generated
rER03
rER03

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6-3.Lens Information
Notification is sent in a 300ms cycle when “On: Information is posted” has been set for the lens information notification On/Off control command

Notification Lens information

ZZZ Zoom position
FFF Focus position
LPI[ZZZ][FFF][III]
III Iris position
（Expressed in 3 digits each）

【Sequence when lens information is changed】

Start lens information notification when the camera receive lens information On command (#LPC1).
When the camera detects changes in the lens information, the changed lens information is sent to the terminals,
and terminals PC1 and PC2 receive this information.
Stop lens information notification when the camera receive lens information Off command (#LPC0).

PC(ROP) PC(ROP) Camera

#LPC1

Start lens information notification

lPI555666777
lPI555666777
Notification posted in
lPI555666777 300ms cycles
lPI555666777

#LPC0

Stop lens information notification

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6-4.Preset playback
This command sends the preset playback completion notification as an update notification when preset playback in the camera has been completed.

Notification Remarks
q[Data] Number of the preset which was played back - 1

【Preset playback sequence】

This is the sequence in which preset number 08 is played back.
As soon as the preset playback command is received, “s07” is returned as the HTTP response,
and as soon as the playback is completed after this, “q07” is posted separately as the update notification.

PC(ROP) PC(ROP) Camera

#R07

s07

Preset playback
q07
q07

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6-5.AWB/ABB execution
This command sends the execution results as an update notification when execution of AWB/ABB has been completed by the camera.

Notification Remarks
OWS AWB execution successful
OAS ABB execution successful

【AWB execution sequence】

As soon as the AWB/ABB execution command is received, return response,
and as soon as the AWB execution is completed, “OWS” is posted separately as the update notification.

Serial IP

PC(ROP) PC(ROP) Camera PC(ROP) PC(ROP) Camera

OWS OWS

OWS
AWB execute AWB execute

OWS OWS
OWS OWS

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 6-6.Camera information batch acquisition
All the information of the camera can be acquired together as a batch.

【Command format】
[send]
http://[IP Address]/live/camdata.html

[receive]
200 OK “Camera information”
See chapter 9 for detail of camera information

【Sequence】

PC(ROP) Camera

http://192.168.0.10/live/camdata.html

200 OK “camera information”

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 7.Error return
The three errors ER1, ER2 and ER3 below are returned in response to control or query commands by the camera.

In the case of Pan/Tilt control command In the case of Camera control command
▼ER1 (unsupported command) ▼ER1 (unsupported command)
This error is generated when a command which is not supported This error is generated when a command which is not supported
by the camera has been received by the camera by the camera has been received by the camera
example) When the non existent “#AX” command example) When the non existent “XF” command
is executed for the camera is executed for the camera

PC(ROP) Camera PC(ROP) Camera

#AX XF

eR1:AX ER1:XF

▼ER2 (busy status) ▼ER2 (busy status)

This error is generated during Standby (Power Off) or This error is generated during Standby (Power Off) or
at other times when the camera is in the busy status. at other times when the camera is in the busy status.

PC(ROP) Camera PC(ROP) Camera

#AXZ555 XSF:1

Standby
Standby

eR2:AXZ ER2:XSF

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 ▼ER3 (outside acceptable range) ▼ER3 (outside acceptable range)
This error is generated when the data value of a command This error is generated when the data value of a command
is outside the acceptable range. is outside the acceptable range.
example) The “#AXZ” command was executed with a data example) The “OGU (gain setting)” command was executed with
value of “000” which is outside the acceptable range. a data value of “90” which is outside the acceptable range.

PC(ROP) Camera PC(ROP) Camera

#AXZ000 OGU:90

eR3:AXZ ER3:OGU

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved.

 8. AW-UE100 Menu-Command Correspondance Table
Menu Command Remarks
Camera
Scene XSF
Brightness
Available When "Iris Mode is Auto" or "Shutter Mode is
Picture Level OSD:48
ELC" or "Gain is Auto" or "FrameMix is Auto"
ORS
Iris Mode
#D3
Auto Iris Speed OSJ:01
Auto Iris Wondow OSJ:02
Iris Limit OSJ:90
Shutter Mode OSJ:03
OSJ:04
OSJ:05
OSJ:06
Step/Synchro Available when Shutter Mode is Step or Synchro
OSJ:07
OSJ:08
OSJ:09
ELC Limit OSD:BF Available when Shutter Mode is ELC
Gain OGU
Super Gain OSI:28
AGC Max Gain OSD:69
Available when Shutter Mode is Off/ELC and Format is
Frame mix OSA:65
59.95p/59.94i/50p/50i
Auto F.Mix Max Gain OSE:74
ND Filter OFT Available when Day/Night is Day
Day/Night #D6
Picture
OAW
White Balance Mode OWS
OAS
OSI:1E
Color Temperature OSI:1F Available when White Balance Mode is VAR
OSI:20
R Gain OSG:39 Available when White Balance Mode is AWB A/AWB B/VAR
B Gain OSG:3A Available when White Balance Mode is AWB A/AWB B/VAR
Color TEMP. Setting
OSJ:48
Color Temperature OSJ:49 Available when White Balance Mode is AWB A/AWB B
OSJ:4A
R Gain OSJ:4B Available when White Balance Mode is AWB A/AWB B
B Gain OSJ:4C Available when White Balance Mode is AWB A/AWB B
G Axis OSJ:4D Available when White Balance Mode is AWB A/AWB B
AWB Gain Offset OSJ:0C
ATW Speed OSI:25 Available when White Balance Mode is ATW
ATW Target R OSJ:0D Available when White Balance Mode is ATW
ATW Target B OSJ:0E Available when White Balance Mode is ATW
Chroma Level OSD:B0
Chroma Phase OSJ:0B
Master Pedestal OSJ:0F
R Pedestal ORP
G Pedestal OSJ:10
B Pedestal OBP
Pedestal Offset OSJ:11
Detail ODT
Master Detail OSA:30 Available when Detail is On
Detail Coring OSJ:12 Available when Detail is On
V Detail Level OSD:A1 Available when Detail is On
Detail Frequency OSD:A2 Available when Detail is On
Level Depend. OSJ:13 Available when Detail is On
Knee Aperture Level OCG:3F Available when Detail is On
Detail Gain(+) OSA:38 Available when Detail is On
Detail Gain(-) OSA:39 Available when Detail is On
Skin Detail OSA:40 Available when Detail is On
Skin Detail Effect OSD:A3 Available when Skin Detail is On
Gamma Mode OSE:72
Gamma OSA:6A
Black Gamma OSA:07
Black Gamma Range OSJ:1B
DRS OSE:33
Knee mode OSA:2D
Auto Knee Response OSG:97
Knee Point OSA:20 Available when Knee Mode is Manual
Knee Slope OSA:24 Available when Knee Mode is Manual
White Clip OSA:2E
White Clip Level OSA:2A Available when White Clip is On
DNR OSD:3A

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 21

 Menu Command Remarks
Matrix
Matrix Type OSE:31
Adaptive Matrix OSJ:4F
R-G OSD:A4 Available when Matrix Type is User
R-B OSD:A5 Available when Matrix Type is User
G-R OSD:A6 Available when Matrix Type is User
G-B OSD:A7 Available when Matrix Type is User
B-R OSD:A8 Available when Matrix Type is User
B-G OSD:A9 Available when Matrix Type is User
OSD:80
B_Mg Available when Matrix Type is User
OSD:81
OSD:82
Mg Available when Matrix Type is User
OSD:83
OSD:84
Mg_R Available when Matrix Type is User
OSD:85
OSD:9A
Mg_R_R Available when Matrix Type is User
OSD:9B
OSD:86
R Available when Matrix Type is User
OSD:87
OSD:9C
R_R_Yl Available when Matrix Type is User
OSD:9D
OSD:88
R_Yl Available when Matrix Type is User
OSD:89
OSD:9E
R_Yl_Yl Available when Matrix Type is User
OSD:9F
OSD:8A
Yl Available when Matrix Type is User
OSD:8B
OSD:1C
Yl_Yl_G Available when Matrix Type is User
OSD:1D
OSD:8C
Yl_G Available when Matrix Type is User
OSD:8D
OSD:8E
G Available when Matrix Type is User
OSD:8F
OSD:90
G_Cy Available when Matrix Type is User
OSD:91
OSD:92
Cy Available when Matrix Type is User
OSD:93
OSD:94
Cy_B Available when Matrix Type is User
OSD:95
OSD:96
B Available when Matrix Type is User
OSD:97
Lens
OAF
Focus Mode
#D1
Crop AF OSJ:91 Available when UHD Crop is Crop(1080)/Crop(720)
OSE:70
Zoom Mode Available when UHD Crop is Off
OSD:B3
Max Digital Zoom OSE:7A Available when Zoom Mode is D.Zoom
Digital Extender OSJ:4E Available when Zoom Mode is Opt.Zoom
O.I.S. Mode OIS
System
Frequency OSE:77
Format OSA:87
UHD Crop OSJ:2E Available when Format is 2160/○○
Crop Zoom OSJ:92 Available when UHD Crop is Crop(1080)/Crop(720)
Shooting mode OSI:30
Genlock
Hrizontal Phase OHP
Tracking Data Output
Serial OSJ:54
IP OSJ:55
Invert Pan/Tilt Axis OSJ:C1
Camera ID OSJ:F4
Wireless Control #WLC
#FAN
Fan
#FS1

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 22

 Menu Command Remarks
Output
12G SDI
Format OSJ:1E
3G SDI Out OSJ:20 Available when 12G SDI>Format is 1080/59.94p / 1080/50p
3G SDI
Format OSJ:21
3G SDI Out OSI:29 Available when 3G SDI>Format is 1080/59.94p / 1080/50p
HDMI
Format OSJ:25
Video Sampling OSE:68 Available when HDMI>Format is 2160/59.94p / 2160/50p
Bar DCB
Color Bar Type OSD:BA Available when Bar is Colorbar
Tone OSJ:27 Available when Bar is Colorbar
Audio OSA:D0
Input Type OSA:D1 Available when Audio is On
Volume Level OSA:D5 Available when Audio is On
Plugin Power OSA:D2 Available when Audio is On and Input Type is Mic
OSD Mix/Crop Marker
12G SDI OSE:7B
3G SDI Out OSE:7B
HDMI OSE:7B
NDI OSE:7B
IP/NDI|HX OSE:7B
OSD off with Tally OSE:75
OSD Status OSA:88
#TAE
TLR
Tally #DA
TLG
#TAA
Tally LED Limit
R OSJ:D9
G OSJ:DA
Tally Brightness OSA:D3
Status Lamp #LMP
External Output
Output1 OSJ:41
Output2 OSJ:42
UHD Crop
3G SDI Out OSI:32 Available when UHD Crop is Crop(1080)/Crop(720)
NDI Out OSJ:93 Available when UHD Crop is Crop(1080)/Crop(720)
IP Out1 OSI:33 Available when UHD Crop is Crop(1080)/Crop(720)
IP Out2 OSJ:94 Available when UHD Crop is Crop(1080)/Crop(720)
Crop Marker OSI:1A Available when UHD Crop is Crop(1080)/Crop(720)
Crop Out OSI:16 Available when UHD Crop is Crop(1080)/Crop(720)
Crop Adjut OSI:17 Available when UHD Crop is Crop(1080)/Crop(720)
OSJ:AF Available when UHD Crop is Crop(1080)/Crop(720)
OSJ:2F
Crop H Position
OSJ:31
OSJ:33
OSJ:B0 Available when UHD Crop is Crop(1080)/Crop(720)
OSJ:30
Crop V Position
OSJ:32
OSJ:34
OSJ:B1 Available when UHD Crop is Crop(1080)/Crop(720)
OSJ:98
OSJ:99
OSJ:9A
OSJ:9B
Crop Zoom Ratio
OSJ:9C
OSJ:9D
OSJ:9E
OSJ:9F
OSJ:A1

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 23

 Menu Command Remarks
Pan/Tilt
Install Position #INS
#SPF
Smart Picture Flip
QFS
Flip Detect Angle #FDA Available when Smart Picture Flip is Auto
P/T Speed Mode OSJ:2D
P/T Accelaration Setting
P/T Accelaration OSJ:A2
Rise S-Curve OSJ:A3 Available when P/T Acceleration is Manual
Fall S-Curve OSJ:A4 Available when P/T Acceleration is Manual
Rise Acceleration OSJ:A5 Available when P/T Acceleration is Manual
Fall Acceleration OSJ:A6 Available when P/T Acceleration is Manual
Speed With Zoom Position #SWZ
Focus Adjust With PTZ. OAZ Available when Focus Mode is Manual
Privacy Mode OSJ:A7
Power On Poosition OSJ:45
Preset Number OSJ:46
Preset
Preset Speed Unit OSJ:29
Preset Speed Table #PST
Preset Speed #UPVS
Preset Acceleration Setting
Preset Accelaration OSJ:A8
Rise S-Curve OSJ:A9 Available when Preset Aceleration is Manual
Fall S-Curve OSJ:AA Available when Preset Aceleration is Manual
Available when Preset Aceleration is Manual and Preset
Rise Acceleration OSJ:AB
Speed Unit is Speed
Available when Preset Aceleration is Manual and Preset
Fall Acceleration OSJ:AC
Speed Unit is Speed
Available when Preset Aceleration is Manual and Preset
Rise Ramp Time OSJ:AD
Speed Unit is Time
Available when Preset Aceleration is Manual and Preset
Fall Ramp Time OSJ:AE
Speed Unit is Time
Preset Scope OSE:71
Preset Digital Extender OSE:7C
Available when Format is 2160/○○ and UHD Crop is
Preset Crop OSJ:2A
Crop(1080)/Crop(720)
Preset Thumbnail Update OSJ:2B
Preset Name OSJ:2C
Preset Iris OSJ:5B Available when Preset Scope is Mode A/Mode B
Preset Zoom Mode OSE:7D
Freeze During Preset #PRF
Maintenance
QSV
FW Version
#QSV
IP Network
Hour Meter
Operation -
Fan -
HDMI Status -
Error Status
Lens -
Pan/Tilt -
Fan -
Temperature -

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 24

 Commands not linked to menus
Menu Command Remarks
Menu control
Menu On/Off DUS
Menu Cancel DPG Available when Menu is On
Menu Enter DIT Available when Menu is On
Menu UP DUP Available when Menu is On
Menu Down DDW Available when Menu is On
Menu Right DRT Available when Menu is On
Menu Left DLT Available when Menu is On
Crop
OSJ:60 Available when UHD Crop is Crop(1080)/Crop(720)
OSI:15
OSJ:5D
Crop H/V Position command
OSJ:5E
OSJ:5F
OSJ:A0
Crop Position / Crop Zoom Position OSJ:C2 Available when UHD Crop is Crop(1080)/Crop(720)
Speed Control (YL/G/MG)
Request Crop Position/Crop Zoom Position OSJ:C3 Available when UHD Crop is Crop(1080)/Crop(720)
Pan/Tilt
Pan Speed Control #P
Tilt Speed Control #T
P/T Speed Control #PTS
P/T Absolute Position Control #APC
P/T Relative Position Control #RPC
P/T Absolute Position Control with Speed #APS
P/T Relative Position Control with Speed #RPS
Limitation Control #LC
Limitation Control (toggle) #L
Lens
Zoom Scale OSJ:3D
Digital Zoom Magnification OSE:76
Zoom Speed Control #Z
Zoom Position Control #AXZ
Focus Speed Control #F Available when Focus Mode is Manual
Focus Position Control #AXF Available when Focus Mode is Manual
Push Auto Focus OSE:69 Available when Focus Mode is Manual
Toutch AF OSJ:28 Available when Focus Mode is Manual and UHD Crop is Off
#AXI
Iris Control #I Available when Iris Mode is Manual
ORV
Iris Follow OSD:4F
Lens Position Information #LPI
Lens Position Information Control #LPC
Request Iris F No. OIF
Request Zoom Position #GZ
Request Focus Position #GF
Request Iris Position #GI
Preset
Recall Preset Memory #R
Save Preset Memory #M
Delete Preset Memory #C
Preset Entry Confirmation #PE
Request Latest Recall Preset No. #S
Preset completion notification q
Save Preset Name OSJ:35
Delete Preset Name (Single) OSJ:36
Delete Preset Name (All) OSJ:37
Update Preset Thumbnail OSJ:39
Delete Preset Thumbnail (Single) OSJ:3A
Delete Preset Thumbnail (All) OSJ:3B
Preset Name/Preset Thumbnail Counter OSJ:3C
Convenient command
Get Gain/Color Temperature/Shutter/ND #PTG
#PTV
Get Pan/Tilt/Zoom/Focus/Iris
#PTD
Operation Lock
Operation Lock OSJ:3E
Release Operation Lock OSJ:3F
Operation Lock Status OSJ:40
Error
Error Information OER
Error Information OSI:46
Latest Error Information #RER

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 25

 Menu Command Remarks
Others
Model Number QID
Camera Title OSJ:5C
Resolution Control #RZL
Power On / Standby #O

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 26

 9. Command List
Scene
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
0 - http://192.168.0.10/cgi-bin/aw_cam?cmd=XSF:1&res=1
Control XSF:[Data] 1 Scene1
2 Scene2
3 Scene3
Response XSF:[Data]
4 Scene4
Scene File cam※ XSF:[Data] OSF:[Data]
0 Scene1
Request QSF 1 Scene2
2 Scene3
3 Scene4
Response OSF:[Data]
4 -
※There are two type of command type "ptz"is Pan-Tilt head Control and "cam" is for camera control

When switching scene, update notification of each command belonging to the scene wii be sent
Item Command Item Command
Scene XSF Skin Detail OSA:40
Picture Level OSD:48 Skin Detail Effect OSD:A3
Gamma Mode OSE:72 Gamma OSA:6A
ORS
Iris Mode Black Gamma OSA:07
#D3
Auto Iris Speed OSJ:01 Black Gamma Range OSJ:1B
Auto Iris Wondow OSJ:02 DRS OSE:33
Iris Limit OSJ:90 Knee mode OSA:2D
Shutter Mode OSJ:03 Auto Knee Response OSG:97
OSJ:06
Step/Synchro Knee Point OSA:20
OSJ:09
ELC Limit OSD:BF Knee Slope OSA:24
Gain OGU White Clip OSA:2E
Super Gain OSI:28 White Clip Level OSA:2A
AGC MaxGain OSD:69 DNR OSD:3A
Frame mix OSA:65 Matrix Type OSE:31
ND Filter OFT R-G OSD:A4
Day/Night #D6 R-B OSD:A5
Auto F.Mix Max Gain OSE:74 G-R OSD:A6
White Balance Mode OAW G-B OSD:A7
Color Temperature OSI:20 B-R OSD:A8
R Gain OSG:39 B-G OSD:A9
B Gain OSG:3A Adaptive Matrix OSJ:4F
OSD:80
AWB Gain Offset OSJ:0C B_Mg
OSD:81
OSD:82
ATW Speed OSI:25 Mg
OSD:83
OSD:84
ATW Target R OSJ:0D Mg_R
OSD:85
OSD:9A
ATW Target B OSJ:0E Mg_R_R
OSD:9B
OSD:86
Chroma Level OSD:B0 R
OSD:87
OSD:9C
Chroma Phase OSJ:0B R_R_Yl
OSD:9D
OSD:88
Master Pedestal OSJ:0F R_Yl
OSD:89
OSD:9E
R Pedestal ORP R_Yl_Yl
OSD:9F
OSD:8A
G Pedestal OSJ:10 Yl
OSD:8B
OSD:1C
B Pedestal OBP Yl_Yl_G
OSD:1D
OSD:8C
Pedestal Offset OSJ:11 Yl_G
OSD:8D

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 27

 Item Command Item Command
OSD:8E
Detail ODT G
OSD:8F
OSD:90
Master Detail OSA:30 G_Cy
OSD:91
OSD:92
Detail Coring OSJ:12 Cy
OSD:93
OSD:94
V Detail Level OSD:A1 Cy_B
OSD:95
OSD:96
Detail Frequency OSD:A2 B
OSD:97
Level Depend. OSJ:13 Color TEMP. Setting OSJ:4A
Knee Aperture Level OCG:3F AWB R Gain OSJ:4B
Detail Gain(+) OSA:38 AWB B Gain OSJ:4C
Detail Gain(-) OSA:39 AWB G Axis OSJ:4D

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 28

 Brightness
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSD:48:[Data] 00h -50 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:48:32&res=1
Response OSD:48:[Data] - -
Picture Level 32h 0 cam OSD:48:[Data] OSD:48:0x[Data]
Request QSD:48 - -
Response OSD:48:[Data] 64h 50
Control ORS:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=ORS:1&res=1
Response ORS:[Data] 0 Manual
Iris Mode cam ORS:[Data] ORS:[Data]
Request QRS 1 Auto
Response ORS:[Data]
Control #D3[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23D30&res=1
Response d3[Data] 0 Manual
Iris Mode ptz d3[Data] d3[Data]
Request #D3 1 Auto
Response d3[Data]
Control OSJ:01:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:01:0&res=1
Response OSJ:01:[Data] 0 Slow
Auto Iris Speed 1 Normal cam OSJ:01:[Data] OSJ:01:0x[Data]
Request QSJ:01 2 Fast
Response OSJ:01:[Data]
Control OSJ:02:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:02:0&res=1
Response OSJ:02:[Data] 0 Normal1
Auto Iris Window 1 Normal2 cam OSJ:02:[Data] OSJ:02:0x[Data]
Request QSJ:02 2 Center
Response OSJ:02:[Data]
Control OSJ:90:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:90:0&res=1
Response OSJ:90:[Data] 0 Off
Iris Limit cam OSJ:90:[Data] OSJ:90:0x[Data]
Request QSJ:90 1 On
Response OSJ:90:[Data]
Control OSJ:03:[Data] 0 Off http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:03:1&res=1
Response OSJ:03:[Data] 1 Step
Shutter Mode cam OSJ:03:[Data] OSJ:03:0x[Data]
Request QSJ:03 2 Synchro
Response OSJ:03:[Data] 3 ELC
Control OSJ:04:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:04:01&res=1
Response OSJ:04:[Data] 01h 1 Increase [Data] stage among selectable Shutter Steps
Step Inc - － cam - - Update notification of OSJ:06 is sent
Request - 64h 100
Response -
Control OSJ:05:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:05:01&res=1
Response OSJ:05:[Data] 01h 1 Decrease [Data] stage among selectable Shutter Steps
Step Dec - － cam - - Update notification of OSJ:06 is sent
Request - 64h 100
Response -
Control OSJ:06:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:06:003C&res=1
Specify the denominator value of [Setting] in [Data] (hexadecimal
number)
Response OSJ:06:[Data] Except for the effective shutter speed, respond with ER3
・59.94p / 59.94i mode
1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000
0001h 1/1 ・29.97p mode
Step VAL - - cam OSJ:06:[Data] OSJ:06:0x[Data] 1/30,1/60, 1/100, 1/120, 1/250,
Request QSJ:06 2710h 1/10000 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000
・23.98p / 24p mode
1/24,1/48, 1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000
・50p / 50i mode
1/60, 1/100, 1/120, 1/250,
Response OSJ:06:[Data] 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000
・25p mode
1/25,1/50,1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 29

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSJ:07:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:07:01&res=1
Response OSJ:07:[Data] 01h 1 Increase [Data] stage among selectable Shutter Steps
Synchro Inc - － cam - - Update notification of OSJ:09 is sent
Request - 64h 100
Response -
Control OSJ:08:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:08:01&res=1
Response OSJ:08:[Data] 01h 1 Decrease [Data] stage among selectable Shutter Steps
Synchro Dec - － cam - - Update notification of OSJ:09 is sent
Request - 64h 100
Response -
Control OSJ:09:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:09:00258&res=1
Specify a value that is 10 times the [Setting] for [Data]
(hexadecimal number).
Response OSJ:09:[Data] Except for the effective shutter speed, round down
・59.94p / 59.94i mode
60.0Hz～7200Hz
00000h 0.0[Hz]
・29.97p mode
Synchro VAL - - cam OSJ:09:[Data] OSJ:09:0x[Data]
Request QSJ:09 30.0Hz～7200Hz
186A0h 10000.0[Hz]
・23.98p / 24p mode
24.0Hz～7200Hz
・50p / 50i mode
50.0Hz～7200Hz
Response OSJ:09:[Data] ・25p mode
25.0Hz～7200Hz
Control OSD:BF:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:BF:2&res=1
Response OSD:BF:[Data] 2 1/100
ELC Limit
3 1/120 cam OSD:BF:[Data] OSD:BF:[Data]
（Auto Shutter Limit） Request QSD:BF 4 1/250
Response OSD:BF:[Data]
08h 0dB http://192.168.0.10/cgi-bin/aw_cam?cmd=OGU:08&res=1
Control OGU:[Data]
- -
11h 9dB When Super Gain is Off
Response OGU:[Data]
- - Auto, 0dB～36dB
Gain cam OGU:[Data] OGU:0x[Data]
1Ah 18dB When Super Gain is On
Request QGU - - Auto, 0dB～42dB
32h 42dB
Response OGU:[Data] 80h AGC On
Control OSI:28:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:28:0&res=1
Response OSI:28:[Data] 0 Off
Super Gain cam OSI:28:[Data] OSI:28:[Data]
Request QSI:28 1 On
Response OSI:28:[Data]
Control OSD:69:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:69:01&res=1
Response OSD:69:[Data] 01 6dB
AGC Max Gain 02 12dB cam OSD:69:[Data] OSD:69:[Data]
Request QSD:69 03 18dB
Response OSD:69:[Data]
Control OSA:65:[Data] 00h Off http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:65:00&res=1
06h +6dB
Response OSA:65:[Data] When Shutter Mode is ELC
0Ch +12dB
Fram Mix cam OSA:65:[Data] OSA:65:0x[Data] Off/Auto is available
Request QSA:65 12h +18dB
18h +24dB
Response OSA:65:[Data] 80h Auto
Control OSE:74:[Data] 00 (Off) http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:74:01&res=1
Response OSE:74:[Data] 01 6dB
Auto F.Mix Max Gain cam OSE:74:[Data] OSE:74:0x[Data]
Request QSE:74 02 12dB
Response OSE:74:[Data] 03 18dB
Control OFT:[Data] 0 Through http://192.168.0.10/cgi-bin/aw_cam?cmd=OFT:0&res=1
Response OFT:[Data] 1 1/4 ND
ND Filter cam OFT:[Data] OFT:[Data]
Request QFT 2 1/16 ND
Response OFT:[Data] 3 1/64 ND
Control #D6[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23D60&res=1
Response d6[Data] 0 Off
Day/Night ptz d6[Data] d6[Data]
Request #D6 1 On
Response d6[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 30

 Picture
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
0 ATW http://192.168.0.10/cgi-bin/aw_cam?cmd=OAW:1&res=1
Control OAW:[Data] 1 AWC A
2 AWC B
3 ---
ATW variable range is from 2000k to 15000K
4 PRESET 3200K
Response OAW:[Data] 5 PRESET 5600K
9 VAR
White Balance Mode cam OAW:[Data] OAW:[Data]
0 ATW
Request QAW 1 ---
2 AWC A
3 AWC B
4 PRESET 3200K
Response OAW:[Data] 5 PRESET 5600K
9 VAR
Control OWS http://192.168.0.10/cgi-bin/aw_cam?cmd=OWS&res=1
Response OWS OWS See chapter 6 for AWB execution sequence
AWB - - cam -
Request - ER3:OWS When Day/Night is Night, AWB is unavailable
Response -
Control OAS http://192.168.0.10/cgi-bin/aw_cam?cmd=OAS&res=1
Response OAS OAS
ABB - - cam -
Request - ER3:OAS
Response -
Control OSI:1E:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:1E:1&res=1
1h 1
Response OSI:1E:[Data] Increase [Data] stage among selectable Color Temperature
Color Temperature Inc - - cam OSI:1E:[Data] -
Request - Update notification of OSI:20 is sent
Ah 10
Response -
Control OSI:1F:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:1F:1&res=1
1h 1
Response OSI:1F:[Data] Decrease [Data] stage among selectable Color Temperature
Color Temperature Dec - - cam OSI:1F:[Data] -
Request - Update notification of OSI:20 is sent
Ah 10
Response -
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:20:007D0&res=1
Control OSI:20:[Data1]:[Data2]
007D0h 2000K
- - Except for the effective Color Temperature, round down
Response OSI:20:[Data1]:[Data2]
03A98h 15000K OSI:20:[Data1]:[Data OSI:20:0x[Data1]:
Color Temperature cam
[Data2] [Data2] 2] [Data2]
Request QSI:20 0h Valid
1h Under
Response OSI:20:[Data1]:[Data2] 2h Over
Control OSG:39:[Data] 738h -200 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSG:39:800&res=1
Response OSG:39:[Data] - -
R Gain 800h 0 cam OSG:39:[Data] OSG:39:0x[Data]
Request QSG:39 - -
Response OSG:39:[Data] 8C8h 200
Control OSG:3A:[Data] 738h -200 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSG:3A:800&res=1
Response OSG:3A:[Data] - -
B Gain 800h 0 cam OSG:3A:[Data] OSG:3A:0x[Data]
Request QSG:3A - -
Response OSG:3A:[Data] 8C8h 200
Control OSJ:48:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:48:1&res=1
1h 1
Response OSJ:48:[Data] Increase [Data] stage among selectable Color Temperature
AWB Color Temperature Inc - - cam OSJ:48:[Data] -
Request - Update notification of OSJ:4A is sent
Ah 10
Response -
Control OSJ:49:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:49:1&res=1
1h 1
Response OSJ:49:[Data] Decrease [Data] stage among selectable Color Temperature
AWB Color Temperature Dec - - cam OSJ:49:[Data] -
Request - Update notification of OSJ:4A is sent
Ah 10
Response -

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 31

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4A:0&res=1
Control OSJ:4A:[Data1]:[Data2]
007D0h 2000K
- - Except for the effective Color Temperature, round down
Response OSJ:4A:[Data1]:[Data2]
03A98h 15000K OSJ:4A:[Data1]:[Data OSJ:4A:0x[Data1]
AWB Color Temperature cam
[Data2] [Data2] 2] :[Data2]
Request QSJ:4A 0h Valid
1h Under
Response OSJ:4A:[Data1]:[Data2] 2h Over
Control OSJ:4B:[Data] 670h -400 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4B:800&res=1
Response OSJ:4B:[Data] - -
AWB R Gain 800h 0 cam OSJ:4B:[Data] OSJ:4B:0x[Data]
Request QSJ:4B - -
Response OSJ:4B:[Data] 990h 400
Control OSJ:4C:[Data] 670h -400 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4C:800&res=1
Response OSJ:4C:[Data] - -
AWB B Gain 800h 0 cam OSJ:4C:[Data] OSJ:4C:0x[Data]
Request QSJ:4C - -
Response OSJ:4C:[Data] 990h 400
Control OSJ:4D:[Data] 670h -400 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4D:800&res=1
Response OSJ:4D:[Data] - -
AWB G Axis 800h 0 cam OSJ:4D:[Data] OSJ:4D:0x[Data]
Request QSJ:4D - -
Response OSJ:4D:[Data] 990h 400
Control OSJ:0C:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:0C:0&res=1
Response OSJ:0C:[Data] 0 Off
AWB Gain Offset cam OSJ:0C:[Data] OSJ:0C:0x[Data]
Request QSJ:0C 1 On
Response OSJ:0C:[Data]
Control OSI:25:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:25:0&res=1
0 Normal
Response OSI:25:[Data]
ATW Speed 1 Slow cam OSI:25:[Data] OSI:25:[Data]
Request QSI:25
2 Fast
Response OSI:25:[Data]
Control OSJ:0D:[Data] 76h -10 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:0D:80&res=1
Response OSJ:0D:[Data] - -
ATW Target R 80h 0 cam OSJ:0D:[Data] OSJ:0D:0x[Data]
Request QSJ:0D - -
Response OSJ:0D:[Data] 8Ah +10
Control OSJ:0E:[Data] 76h -10 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:0E:80&res=1
Response OSJ:0E:[Data] - -
ATW Target B 80h 0 cam OSJ:0E:[Data] OSJ:0E:0x[Data]
Request QSJ:0E - -
Response OSJ:0E:[Data] 8Ah +10
Control OSD:B0:[Data] 00h OFF http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:B0:80&res=1
1Dh -99% Step:1%
Response OSD:B0:[Data] - -
Chroma Level cam OSD:B0:[Data] OSD:B0:0x[Data]
Request QSD:B0 80h 0
- -
Response OSD:B0:[Data] E3h 99%
Control OSJ:0B:[Data] 61h -31 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:0B:80&res=1
Response OSJ:0B:[Data] - -
Chroma Phase 80h 0 cam OSJ:0B:[Data] OSJ:0B:0x[Data]
Request QSJ:0B - -
Response OSJ:0B:[Data] 9Fｈ +31
Control OSJ:0F:[Data] 738h -200 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:0F:800&res=1
Response OSJ:0F:[Data] - -
Master Pedestal 800h 0 cam OSJ:0F:[Data] OSJ:0F:0x[Data]
Request QSJ:0F - -
Response OSJ:0F:[Data] 8C8h 200

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 32

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control ORP:[Data] 032h -100 http://192.168.0.10/cgi-bin/aw_cam?cmd=ORP:096&res=1
Response ORP:[Data] - -
R Pedestal 096h 0 cam ORP:[Data] ORP:0x[Data]
Request QRP - -
Response ORP:[Data] 0FAh +100
Control OSJ:10:[Data] 032h -100 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:10:096&res=1
Response OSJ:10:[Data] - -
G Pedestal 096h 0 cam OSJ:10:[Data] OSJ:10:0x[Data]
Request QSJ:10 - -
Response OSJ:10:[Data] 0FAh +100
Control OBP:[Data] 032h -100 http://192.168.0.10/cgi-bin/aw_cam?cmd=OBP:960&res=1
Response OBP:[Data] - -
B Pedestal 096h 0 cam OBP:[Data] OBP:0x[Data]
Request QBP - -
Response OBP:[Data] 0FAh +100
Control OSJ:11:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:11:0&res=1
Response OSJ:11:[Data] 0 Off
Pedestal Offset cam OSJ:11:[Data] OSJ:11:[Data]
Request QSJ:11 1 On
Response OSJ:11:[Data]
Control ODT:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=ODT:1&res=1
0 Off
Response ODT:[Data]
Detail 1 On cam ODT:[Data] ODT:[Data]
Request QDT 2 On
Response ODT:[Data]
Control OSA:30:[Data] 61h -31 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:30:80&res=1
Response OSA:30:[Data] - -
Master Detail 80h 0 cam OSA:30:[Data] OSA:30:[Data]
Request QSA:30 - -
Response OSA:30:[Data] 9Fh +31
Control OSJ:12:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:12:00&res=1
00h 0
Response OSJ:12:[Data]
Detail Coring - - cam OSJ:12:[Data] OSJ:12:0x[Data]
Request QSJ:12
3Ch 60
Response OSJ:12:[Data]
Control OSD:A1:[Data] 79h -7 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A1:80&res=1
Response OSD:A1:[Data] - -
V Detail Level 80h 0 cam OSD:A1:[Data] OSD:A1:0x[Data]
Request QSD:A1 - -
Response OSD:A1:[Data] 87h 7
Control OSD:A2:[Data] 79h -7 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A2:80&res=1
Response OSD:A2:[Data] - -
Detail Frequency 80h 0 cam OSD:A2:[Data] OSD:A2:0x[Data]
Request QSD:A2 - -
Response OSD:A2:[Data] 87h 7
Control OSJ:13:[Data] 79h -7 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:13:80&res=1
Response OSJ:13:[Data] - -
Level Depend 80h 0 cam OSJ:13:[Data] OSJ:13:0x[Data]
Request QSJ:13 - -
Response OSJ:13:[Data] 87h 7
Control OSG:3F:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSG:3F:00&res=1
00h 0
Response OSG:3F:[Data]
Knee Ape. Level - - cam OSG:3F:[Data] OSG:3F:0x[Data]
Request QSG:3F
05h 5
Response OSG:3F:[Data]
Control OSA:38:[Data] 61h -31 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:38:80&res=1
Response OSA:38:[Data] - -
Detail Gain(+) 80h 0 cam OSA:38:[Data] OSA:38:0x[Data]
Request QSA:38 - -
Response OSA:38:[Data] 9Fh +31
Control OSA:39:[Data] 61h -31 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:39:80&res=1
Response OSA:39:[Data] - -
Detail Gain(-) 80h 0 cam OSA:39:[Data] OSA:39:0x[Data]
Request QSA:39 - -
Response OSA:39:[Data] 9Fh +31

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 33

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSA:40:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:40:0&res=1
Response OSA:40:[Data] 0 Off
Skin Tone Detail cam OSA:40:[Data] OSA:40:[Data]
Request QSA:40 1 On
Response OSA:40:[Data]
Control OSD:A3:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A3:80&res=1
80h 0
Response OSD:A3:[Data]
Skin Detail Effect - - cam OSD:A3:[Data] OSD:A3:0x[Data]
Request QSD:A3
9Fh +31
Response OSD:A3:[Data]
Control OSE:72:[Data] 0 HD http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:72:0&res=1
Response OSE:72:[Data] 2 FILMLIKE1
Gamma Mode cam OSE:72:[Data] OSE:72:[Data]
Request QSE:72 3 FILMLIKE2
Response OSE:72:[Data] 4 FILMLIKE3
Control OSA:6A:[Data] 67h 0.30 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:6A:67&res=1
- -
Response OSA:6A:[Data] 6Ch 0.35 Step：0.01
Gamma - - cam OSA:6A:[Data] OSA:6A:0x[Data]
Request QSA:6A 80h 0.55
- -
Response OSA:6A:[Data] 94h 0.75
Control OSA:07:[Data] 78h -8 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:07:80&res=1
Response OSA:07:[Data] - -
Black Gamma 80h 0 cam OSA:07:[Data] OSA:07:0x[Data]
Request QSA:07 - -
Response OSA:07:[Data] 88h 8
Control OSJ:1B:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:1B:1&res=1
1 1
Response OSJ:1B:[Data]
B Gamma Range 2 2 cam OSJ:1B:[Data] OSJ:1B:0x[Data]
Request QSJ:1B
3 3
Response OSJ:1B:[Data]
Control OSE:33:[Data] 0 OFF http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:33:1&res=1
Response OSE:33:[Data] 1 LOW
DRS cam OSE:33:[Data] OSE:33:[Data]
Request QSE:33 2 MID
Response OSE:33:[Data] 3 HIGH
Control OSA:2D:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:2D:0&res=1
0 OFF
Response OSA:2D:[Data]
Knee Mode 1 MANUAL cam OSA:2D:[Data] OSA:2D:[Data]
Request QSA:2D
2 AUTO
Response OSA:2D:[Data]
Control OSG:97:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSG:97:1&res=1
1 1
Response OSG:97:[Data]
Auto Knee Response - - cam OSG:97:[Data] OSG:97:[Data]
Request QSG:97
8 8
Response OSG:97:[Data]
Control OSA:20:[Data] 22h 70.00% http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:20:4A&res=1
- -
Response OSA:20:[Data] 4Ah 80.00% Step：0.5%
Knee Point - - cam OSA:20:[Data] OSA:20:0x[Data]
Request QSA:20 80h 93.50%
- -
Response OSA:20:[Data] B6h 107.00%
Control OSA:24:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:24:00&res=1
00h 0
Response OSA:24:[Data]
Knee Slope - - cam OSA:24:[Data] OSA:24:0x[Data]
Request QSA:24
63h 99
Response OSA:24:[Data]
Control OSA:2E:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:2E:0&res=1
Response OSA:2E:[Data] 0 Off
White Clip cam OSA:2E:[Data] OSA:2E:[Data]
Request QSA:2E 1 On
Response OSA:2E:[Data]
Control OSA:2A:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:2A:00&res=1
00h 90%
Response OSA:2A:[Data] Step：1%
White Clip Level - - cam OSA:2A:[Data] OSA:2A:0x[Data]
Request QSA:2A
13h 109%
Response OSA:2A:[Data]
Control OSD:3A:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:3A:01&res=1
00 Off
Response OSD:3A:[Data]
DNR 01 Low cam OSD:3A:[Data] OSD:3A:0x[Data]
Request QSD:3A
02 High
Response OSD:3A:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 34

 Matrix
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSE:31:[Data] 0 NORMAL http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:31:0&res=1
Response OSE:31:[Data] 1 EBU
Matrix Type cam OSE:31:[Data] OSE:31:[Data]
Request QSE:31 2 NTSC
Response OSE:31:[Data] 3 USER
Control OSJ:4F:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4F:0&res=1
Response OSJ:4F:[Data] 0 Off
Adaptive Matrix cam OSJ:4F:[Data] OSJ:4F:[Data]
Request QSJ:4F 1 On
Response OSJ:4F:[Data]
Control OSD:A4:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A4:80&res=1
Response OSD:A4:[Data] - -
Matrix(R-G) 80h 0 cam OSD:A4:[Data] OSD:A4:0x[Data]
Request QSD:A4 - -
Response OSD:A4:[Data] BFh 63
Control OSD:A5:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A5:80&res=1
Response OSD:A5:[Data] - -
Matrix(R-B) 80h 0 cam OSD:A5:[Data] OSD:A5:0x[Data]
Request QSD:A5 - -
Response OSD:A5:[Data] BFh 63
Control OSD:A6:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A6:80&res=1
Response OSD:A6:[Data] - -
Matrix(G-R) 80h 0 cam OSD:A6:[Data] OSD:A6:0x[Data]
Request QSD:A6 - -
Response OSD:A6:[Data] BFh 63
Control OSD:A7:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A7:80&res=1
Response OSD:A7:[Data] - -
Matrix(G-B) 80h 0 cam OSD:A7:[Data] OSD:A7:0x[Data]
Request QSD:A7 - -
Response OSD:A7:[Data] BFh 63
Control OSD:A8:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A8:80&res=1
Response OSD:A8:[Data] - -
Matrix(B-R) 80h 0 cam OSD:A8:[Data] OSD:A8:0x[Data]
Request QSD:A8 - -
Response OSD:A8:[Data] BFh 63
Control OSD:A9:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:A9:80&res=1
Response OSD:A9:[Data] - -
Matrix(B-G) 80h 0 cam OSD:A9:[Data] OSD:A9:0x[Data]
Request QSD:A9 - -
Response OSD:A9:[Data] BFh 63
Control OSD:80:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:80:80&res=1
Response OSD:80:[Data] - -
Color Correction
80h 0 cam OSD:80:[Data] OSD:80:0x[Data]
B_Mg Saturation Request QSD:80 - -
Response OSD:80:[Data] BFh 63
Control OSD:81:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:81:80&res=1
Response OSD:81:[Data] - -
Color Correction
80h 0 cam OSD:81:[Data] OSD:81:0x[Data]
B_Mg Phase Request QSD:81 - -
Response OSD:81:[Data] BFh 63

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 35

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSD:82:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:82:80&res=1
Response OSD:82:[Data] - -
Color Correction
80h 0 cam OSD:82:[Data] OSD:82:0x[Data]
Mg Saturation Request QSD:82 - -
Response OSD:82:[Data] BFh 63
Control OSD:83:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:83:80&res=1
Response OSD:83:[Data] - -
Color Correction
80h 0 cam OSD:83:[Data] OSD:83:0x[Data]
Mg Phase Request QSD:83 - -
Response OSD:83:[Data] BFh 63
Control OSD:84:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:84:80&res=1
Response OSD:84:[Data] - -
Color Correction
80h 0 cam OSD:84:[Data] OSD:84:0x[Data]
Mg_R Saturation Request QSD:84 - -
Response OSD:84:[Data] BFh 63
Control OSD:85:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:85:80&res=1
Response OSD:85:[Data] - -
Color Correction
80h 0 cam OSD:85:[Data] OSD:85:0x[Data]
Mg_R Phase Request QSD:85 - -
Response OSD:85:[Data] BFh 63
Control OSD:9A:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9A:80&res=1
Response OSD:9A:[Data] - -
Color Correction
80h 0 cam OSD:9A:[Data] OSD:9A:0x[Data]
Mg_R_R Saturation Request QSD:9A - -
Response OSD:9A:[Data] BFh 63
Control OSD:9B:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9B:80&res=1
Response OSD:9B:[Data] - -
Color Correction
80h 0 cam OSD:9B:[Data] OSD:9B:0x[Data]
Mg_R_R Phase Request QSD:9B - -
Response OSD:9B:[Data] BFh 63
Control OSD:86:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:86:80&res=1
Response OSD:86:[Data] - -
Color Correction
80h 0 cam OSD:86:[Data] OSD:86:0x[Data]
R Saturation Request QSD:86 - -
Response OSD:86:[Data] BFh 63
Control OSD:87:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:87:80&res=1
Response OSD:87:[Data] - -
Color Correction
80h 0 cam OSD:87:[Data] OSD:87:0x[Data]
R Phase Request QSD:87 - -
Response OSD:87:[Data] BFh 63
Control OSD:9C:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9C:80&res=1
Response OSD:9C:[Data] - -
Color Correction
80h 0 cam OSD:9C:[Data] OSD:9C:0x[Data]
R_R_YI Saturation Request QSD:9C - -
Response OSD:9C:[Data] BFh 63
Control OSD:9D:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9D:80&res=1
Response OSD:9D:[Data] - -
Color Correction
80h 0 cam OSD:9D:[Data] OSD:9D:0x[Data]
R_R_YI Phase Request QSD:9D - -
Response OSD:9D:[Data] BFh 63
Control OSD:88:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:88:80&res=1
Response OSD:88:[Data] - -
Color Correction
80h 0 cam OSD:88:[Data] OSD:88:0x[Data]
R_YI Saturation Request QSD:88 - -
Response OSD:88:[Data] BFh 63
Control OSD:89:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:89:80&res=1
Response OSD:89:[Data] - -
Color Correction
80h 0 cam OSD:89:[Data] OSD:89:0x[Data]
R_YI Phase Request QSD:89 - -
Response OSD:89:[Data] BFh 63

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 36

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSD:9E:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9E:80&res=1
Response OSD:9E:[Data] - -
Color Correction
80h 0 cam OSD:9E:[Data] OSD:9E:0x[Data]
R_YI_YI Saturation Request QSD:9E - -
Response OSD:9E:[Data] BFh 63
Control OSD:9F:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:9F:80&res=1
Response OSD:9F:[Data] - -
Color Correction
80h 0 cam OSD:9F:[Data] OSD:9F:0x[Data]
R_YI_YI Phase Request QSD:9F - -
Response OSD:9F:[Data] BFh 63
Control OSD:8A:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8A:80&res=1
Response OSD:8A:[Data] - -
Color Correction
80h 0 cam OSD:8A:[Data] OSD:8A:0x[Data]
YI Saturation Request QSD:8A - -
Response OSD:8A:[Data] BFh 63
Control OSD:8B:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8B:80&res=1
Response OSD:8B:[Data] - -
Color Correction
80h 0 cam OSD:8B:[Data] OSD:8B:0x[Data]
YI Phase Request QSD:8B - -
Response OSD:8B:[Data] BFh 63
Control OSJ:1C:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:1C:80&res=1
Response OSJ:1C:[Data] - -
Color Correction
80h 0 cam OSJ:1C:[Data] OSJ:1C:0x[Data]
Yl_Yl_G Saturation Request QSJ:1C - -
Response OSJ:1C:[Data] BFh 63
Control OSJ:1D:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:1D:80&res=1
Response OSJ:1D:[Data] - -
Color Correction
80h 0 cam OSJ:1D:[Data] OSJ:1D:0x[Data]
Yl_Yl_G Phase Request QSJ:1D - -
Response OSJ:1D:[Data] BFh 63
Control OSD:8C:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8C:80&res=1
Response OSD:8C:[Data] - -
Color Correction
80h 0 cam OSD:8C:[Data] OSD:8C:0x[Data]
YI_G Saturation Request QSD:8C - -
Response OSD:8C:[Data] BFh 63
Control OSD:8D:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8D:80&res=1
Response OSD:8D:[Data] - -
Color Correction
80h 0 cam OSD:8D:[Data] OSD:8D:0x[Data]
YI_G Phase Request QSD:8D - -
Response OSD:8D:[Data] BFh 63
Control OSD:8E:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8E:80&res=1
Response OSD:8E:[Data] - -
Color Correction
80h 0 cam OSD:8E:[Data] OSD:8E:0x[Data]
G Saturation Request QSD:8E - -
Response OSD:8E:[Data] BFh 63
Control OSD:8F:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:8F:80&res=1
Response OSD:8F:[Data] - -
Color Correction
80h 0 cam OSD:8F:[Data] OSD:8F:0x[Data]
G Phase Request QSD:8F - -
Response OSD:8F:[Data] BFh 63
Control OSD:90:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:90:80&res=1
Response OSD:90:[Data] - -
Color Correction
80h 0 cam OSD:90:[Data] OSD:90:0x[Data]
G_Cy Saturation Request QSD:90 - -
Response OSD:90:[Data] BFh 63
Control OSD:91:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:91:80&res=1
Response OSD:91:[Data] - -
Color Correction
80h 0 cam OSD:91:[Data] OSD:91:0x[Data]
G_Cy Phase Request QSD:91 - -
Response OSD:91:[Data] BFh 63

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 37

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSD:92:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:92:80&res=1
Response OSD:92:[Data] - -
Color Correction
80h 0 cam OSD:92:[Data] OSD:92:0x[Data]
Cy Saturation Request QSD:92 - -
Response OSD:92:[Data] BFh 63
Control OSD:93:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:93:80&res=1
Response OSD:93:[Data] - -
Color Correction
80h 0 cam OSD:93:[Data] OSD:93:0x[Data]
Cy Phase Request QSD:93 - -
Response OSD:93:[Data] BFh 63
Control OSD:94:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:94:80&res=1
Response OSD:94:[Data] - -
Color Correction
80h 0 cam OSD:94:[Data] OSD:94:0x[Data]
Cy_B Saturation Request QSD:94 - -
Response OSD:94:[Data] BFh 63
Control OSD:95:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:95:80&res=1
Response OSD:95:[Data] - -
Color Correction
80h 0 cam OSD:95:[Data] OSD:95:0x[Data]
Cy_B Phase Request QSD:95 - -
Response OSD:95:[Data] BFh 63
Control OSD:96:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:96:80&res=1
Response OSD:96:[Data] - -
Color Correction
80h 0 cam OSD:96:[Data] OSD:96:0x[Data]
B Saturation Request QSD:96 - -
Response OSD:96:[Data] BFh 63
Control OSD:97:[Data] 41h -63 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:97:80&res=1
Response OSD:97:[Data] - -
Color Correction
80h 0 cam OSD:97:[Data] OSD:97:0x[Data]
B Phase Request QSD:97 - -
Response OSD:97:[Data] BFh 63

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 38

 Lens
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OAF:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OAF:0&res=1
Response OAF:[Data] 0 Manual
Focus Mode cam OAF:[Data] OAF:[Data]
Request QAF 1 Auto
Response OAF:[Data]
Control #D1[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23D10&res=1
Response d1[Data] 0 Manual
Focus Mode ptz d1[Data] d1[Data]
Request #D1 1 Auto
Response d1[Data]
Control OSJ:91:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:91:0&res=1
Response OSJ:91:[Data] 0 Off
Crop AF cam OSJ:91:[Data] OSJ:91:[Data]
Request QSJ:91 1 On
Response OSJ:91:[Data]
Control OSE:70:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:70:1&res=1
[Zoom Mode]
Response OSE:70:[Data] -Opt Zoom
OSE:70:0
OSD:B3:0
0 Disable -i Zoom
Digital Zoom cam OSE:70:[Data] OSE:70:[Data]
Request QSE:70 1 Enable OSE:70:0
OSD:B3:1
-D Zoom
Response OSE:70:[Data] OSE:70:1
OSD:B3:0
Control OSD:B3:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:B3:0&res=1
Response OSD:B3:[Data] 0 Disable
i.zoom cam OSD:B3:[Data] OSD:B3:[Data]
Request QSD:B3 1 Enable
Response OSD:B3:[Data]
Control OSE:7A:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:7A:10&res=1
02 x2
Response OSE:7A:[Data]
Max Digital Zoom - - cam OSE:7A:[Data] OSE:7A:[Data]
Request QSE:7A
10 x10
Response OSE:7A:[Data]
Control OSJ:4E:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:4E:1&res=1
0 OFF
Response OSJ:4E:[Data]
Digital Extender 1 x1.4 cam OSJ:4E:[Data] OSJ:4E:[Data]
Request QSJ:4E
2 x2.0
Response OSJ:4E:[Data]
Control - http://192.168.0.10/cgi-bin/aw_cam?cmd=QSJ:3D&res=1
000h 0
Response -
Zoom Scale - - cam - -
Request QSJ:3D
3E7h 999
Response OSJ:3D:[Data]
Control OSE:76:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:76:0100&res=1
0100 x1.00
Response OSE:76:[Data]
Digital Zoom Magnification - - cam OSE:76:[Data] -
Request QSE:76
9999 x99.99
Response OSE:76:[Data]
Control OIS:[Data] 0 Off http://192.168.0.10/cgi-bin/aw_cam?cmd=OIS:0&res=1
Response OIS:[Data] 1 O.I.S
OIS cam OIS:[Data] OIS:[Data]
Request QIS 2 Hybrid (STABLE)
Response OIS:[Data] 3 Hybrid (PAN/TILT)

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 39

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control #Z[Data] 01 Wide Max. Speed http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23Z50&res=1
- -
Response zS[Data] 49 Wide Min. Speed
Zoom Speed Control 50 Zoom Stop ptz - -
Request - 51 Tele Min. Speed
- -
Response - 99 Tele Max. Speed
Control #AXZ[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXZ555&res=1
555h Wide
Response axz[Data]
Zoom Position Control - - ptz - axz[Data]
Request #AXZ
FFFh Tele
Response axz[Data]
Control #F[Data] 01 Near Max. Speed http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23F50&res=1
- -
Response fS[Data] 49 Near Min. Speed
Focus Speed Control 50 Stop ptz - -
Request - 51 Far Min. Speed
- -
Response - 99 Far Max. Speed
Control #AXF[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXF555&res=1
555h Near
Response axf[Data]
Focus Position Control - - ptz - axf[Data]
Request #AXF
FFFh Far
Response axf[Data]
Control OSE:69:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:69:1&res=1
Response OSE:69:[Data]
Push Auto Focus 1 Push Auto cam - -
Request -
Response -
［Data1］ ［Data1］H Pos. http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:28:32:32&res=1
Control OSJ:28:[Data1]:[Data2]
00h 0%
- -
Response OSJ:28:[Data1]:[Data2]
64h 100%
Toutch AF cam - -
［Data2] ［Data2]V Pos.
Request - 00h 0%
- -
Response - 64h 100%
Control #AXI[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXI555&res=1
555h Iris Close
Response axi[Data]
Iris Control - - ptz - axi[Data]
Request #AXI
FFFh Iris Open
Response axi[Data]
Control #I[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23I50&res=1
01 Iris Close
Response iC[Data]
Iris Control - - ptz - -
Request #I
99 Iris Open
Response iC[Data]
Control ORV:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=ORV:000&res=1
000h Iris Close
Response ORV:[Data]
Iris Control - - cam ORV:[Data] -
Request QRV
3FFh Iris Open
Response ORV:[Data]
Control - http://192.168.0.10/cgi-bin/aw_cam?cmd=QSD:4F&res=1
00h Iris Close
Response -
Iris Follow - - cam - OSD:4F:[Data]
Request QSD:4F
FFh Iris Open
Response OSD:4F:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 40

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1]Zoom Position http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LPI&res=1
Control - 555h Wide
- -
FFFh Tele
Response - [Data2] [Data2]Focus Position
555h Near
Lens Position Information ptz - -
- -
Request #LPI FFFh Far
[Data3] [Data3]Iris Position
555h Close
Response lPI[Data1][Data2][Data3] - -
FFFh Open
Control #LPC[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LPC1&res=1
Lens Position Response lPC[Data] 0 Off
ptz lPC[Data] -
Information Control Request #LPC 1 On
Response lPC[Data]
http://192.168.0.10/cgi-bin/aw_cam?cmd=QIF&res=1
Control - 0Eh F1.4
- -
1Ch F2.8
Response - - -
Request Iris F No. 38h F5.6 cam - OIF:[Data]
Request QIF - -
A0h F16
- -
Response OIF:[Data] FFh CLOSE
Control - 555h Wide http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23GZ&res=1
Response - - -
Request Zoom Position FFFh Tele ptz - -
Request #GZ
Response gz[Data] "---" @Power OFF
Control - 555h Near http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23GF&res=1
Response - - -
Request Focus Position FFFh Far ptz - -
Request #GF
Response gf[Data] "---" @Power OFF
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23GI&res=1
Control -
555h Close
- -
Response - FFFh Open
Request Iris Position ptz - -
"---" @Power OFF
Request #GI
[Data2] [Data2]
0 Manual Iris
Response gi[Data1][Data2]
1 Auto Iris

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 41

 System
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSE:77:[Data] 0 59.94Hz http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:77:1&res=1
Response OSE:77:[Data] 1 50.00Hz Reboot after changing Frequency
Frequency cam OSE:77:[Data] OSE:77:[Data]
Request QSE:77 2 24Hz
Response OSE:77:[Data] 3 23.98Hz
1h 720/59.94p http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:87:1&res=1
2h 720/50p
Control OSA:87:[Data] 4h 1080/59.94i
5h 1080/50i
7h 1080/29.97psF
8h 1080/25psF [59.94Hz]
Ah 1080/23.98psF 2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i,
Response OSA:87:[Data] 10h 1080/59.94p 1080/29.97p, 1080/29.97PsF, 1080/23.98p(59.94i), 720/59.94p
11h 1080/50p
14h 1080/29.97p [50Hz]
Format 15h 1080/25p cam OSA:87:[Data] OSA:87:0x[Data] 2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p,
16h 1080/23.98p（over 1080/25PsF, 720/50p
59.94i/p）
Request QSA:87 17h 2160/29.97p [24.00Hz]
18h 2160/25p 2160/24p, 1080/24p
19h 2160/59.94p
1Ah 2160/50p [23.98Hz]
1Bh 2160/23.98p 2160/23.98p, 1080/23.98p, 1080/23.98PsF
Response OSA:87:[Data] 21h 2160/24p
22h 1080/24p
23h 1080/23.98p
Control OSJ:2E:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2E:0&res=1

Response OSJ:2E:[Data] 0 Off When Format is 2160/59.94p or 2160/50p

UHD Crop 1 Crop(1080) cam OSJ:2E:[Data] OSJ:2E:0x[Data] Off, Crop(1080) and Crop(720) are available
Request QSJ:2E 2 Crop(720) When Format is 2160/29.97p, 2160/25p, 2160/24p or
2160/23.98p
Response OSJ:2E:[Data] Off and Crop(1080) are available
Control OSJ:92:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:91:0&res=1
Response OSJ:92:[Data] 0 Off
Crop Zoom cam OSJ:92:[Data] OSJ:92:[Data]
Request QSJ:92 1 On
Response OSJ:92:[Data]
Control OSI:30:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:30:0&res=1
Response OSI:30:[Data] 0 Normal
Shooting Mode cam OSI:30:[Data] OSI:30:[Data]
Request QSI:30 1 High Sens.
Response OSI:30:[Data]
Control OHP:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OHP:000&res=1
000h -206
Response OHP:[Data]
Horizontal Phase - - cam OHP:[Data] -
Request QHP
3FFh +49
Response OHP:[Data]
Control OSJ:54:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:54:0&res=1
Tracking data output Response OSJ:54:[Data] 0 Off
cam OSJ:54:[Data] OSJ:54:[Data]
Serial Out Request QSJ:54 1 On
Response OSJ:54:[Data]
Control OSJ:55:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:55:0&res=1
Tracking data output Response OSJ:55:[Data] 0 Off
cam OSJ:55:[Data] OSJ:55:[Data]
IP Out Request QSJ:55 1 On
Response OSJ:55:[Data]
Control OSJ:C1:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:C1:0&res=1
Tracking data output Response OSJ:C1:[Data] 0 Off
cam OSJ:C1:[Data] OSJ:C1:[Data]
Invert P/T axis Request QSJ:C1 1 On
Response OSJ:C1:[Data]
Control OSJ:F4:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:F4:00&res=1
0x00 0x00
Tracking data output Response OSJ:F4:[Data]
- - cam OSJ:F4:[Data] OSJ:F4:0x[Data]
Camera ID Request QSJ:F4
0xFF 0xFF
Response OSJ:F4:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 42

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control #WLC[Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23WLC1&res=1
Response wLC[Data1] 0 Disable
Wireless Control ptz wLC[Data1] -
Request #WLC 1 Enable
Response wLC[Data1]
Control #FAN[Data] 0 Auto http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23FAN0&res=1
Response fAN[Data] 1 High
Fan ptz fAN[Data] fAN[Data]
Request #FAN 2 Mid
Response fAN[Data] 3 Low
Control - http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23FS1&res=1
0 Off
Response -
Fan Status 1 On ptz fS1[Data] -
Request #FS1
2 Error
Response fS1[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 43

 Output
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
1h http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:1E:1&res=1
720/59.94p
2h
720/50p
Control OSJ:1E:[Data] 4h
1080/59.94i
5h
1080/50i
7h
1080/29.97psF
8h [59.94Hz]
1080/25psF
Ah 2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i,
1080/23.98psF
Response OSJ:1E:[Data] 10h 1080/29.97p, 1080/29.97PsF, 1080/23.98p(59.94i), 720/59.94p
1080/59.94p
11h
1080/50p
14h [50Hz]
12G SDI 1080/29.97p
15h cam OSJ:1E:[Data] - 2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p,
Output Format 1080/25p
16h 1080/25PsF, 720/50p
1080/23.98p（over 59.94i/p）
Request QSJ:1E 2160/29.97p
17h [24.00Hz]
2160/25p
18h 2160/24p, 1080/24p
2160/59.94p
19h
2160/50p
1Ah [23.98Hz]
2160/23.98p
1Bh 2160/23.98p, 1080/23.98p, 1080/23.98PsF
2160/24p
Response OSJ:1E:[Data] 21h
1080/24p
22h
1080/23.98p
23h
Control OSJ:20:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:20:0&res=1
12G SDI Response OSJ:20:[Data] 0 Level A
cam OSJ:20:[Data] -
3G SDI Out Request QSJ:20 1 Level B
Response OSJ:20:[Data]
1h http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:21:1&res=1
Control OSJ:21:[Data] 720/59.94p
2h
720/50p
4h
1080/59.94i [59.94Hz]
5h
1080/50i 1080/59.94p, 1080/59.94i, 1080/29.97p, 1080/29.97PsF,
Response OSJ:21:[Data] 7h
1080/29.97psF 1080/23.98p(59.94i), 720/59.94p
8h
1080/25psF
Ah
3G SDI 1080/23.98psF [50Hz]
10h cam OSJ:21:[Data] -
Output Format 1080/59.94p 1080/50p, 1080/50i, 1080/25p, 1080/25PsF, 720/50p
11h
Request QSJ:21 1080/50p
14h
1080/29.97p [24.00Hz]
15h
1080/25p 1080/24p
16h
1080/23.98p（over 59.94i/p）
Response OSJ:21:[Data] 1080/24p [23.98Hz]
22h
1080/23.98p 1080/23.98p, 1080/23.98PsF
23h
Control OSI:29:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:29:0&res=1
3G SDI Response OSI:29:[Data] 0 Level A
cam OSI:29:[Data] -
3G SDI Out Request QSI:29 1 Level B
Response OSI:29:[Data]
1h http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:25:1&res=1
720/59.94p
2h
Control OSJ:25:[Data] 720/50p
4h
1080/59.94i
5h
1080/50i
10h [59.94Hz]
1080/59.94p
11h 2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i,
1080/50p
Response OSJ:25:[Data] 14h 1080/29.97p, 1080/23.98p(59.94i), 720/59.94p
1080/29.97p
15h
1080/25p
HDMI 16h [50Hz]
1080/23.98p（over 59.94i/p） cam OSJ:25:[Data] -
Output Format 2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 720/50p
2160/29.97p
17h
Request QSJ:25 2160/25p
18h [24.00Hz]
2160/59.94p
19h 2160/24p, 1080/24p
2160/50p
1Ah
2160/23.98p
1Bh [23.98Hz]
2160/24p
21h 2160/23.98p, 1080/23.98p
Response OSJ:25:[Data] 1080/24p
22h
1080/23.98p
23h

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 44

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSE:68:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:68:2&res=1
HDMI Response OSE:68:[Data] 2 YPbPr(422)
cam OSE:68:[Data] -
Video Sampling Request QSE:68 4 YPbPr(420)
Response OSE:68:[Data]
Control DCB:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DCB:1&res=1
Response DCB:[Data] 0 Camera
Color Bar cam DCB:[Data] OBR:[Data]
Request QBR 1 Colorbar
Response OBR:[Data]
Control OSD:BA:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSD:BA:0&res=1
Response OSD:BA:[Data] 0 Type2(Full Bar/EBU)
Colo Bar Type cam OSD:BA:[Data] -
Request QSD:BA 1 Type1(SMPTE)
Response OSD:BA:[Data]
Control OSJ:27:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:27:0&res=1
0 Off
Response OSJ:27:[Data]
Color Bar Tone 1 Low cam OSJ:27:[Data] -
Request QSJ:27
2 Normal
Response OSJ:27:[Data]
Control OSA:D0:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:D0:1&res=1
Response OSA:D0:[Data] 0 Off
Audio cam OSA:D0:[Data] -
Request QSA:D0 1 On
Response OSA:D0:[Data]
Control OSA:D1:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:D1:0&res=1
Audio Response OSA:D1:[Data] 0 Mic
cam OSA:D1:[Data] -
Input Type Request QSA:D1 3 Line
Response OSA:D1:[Data]
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:D5:0:5C&res=1
Control OSA:D5:[Data1]:[Data2]
0 CH1
[Data2] [Data2]
Response OSA:D5:[Data1]:[Data2]
Audio 5Ch -36dB OSA:D5:[Data1]:[Data
cam -
Volume Level - - 2]
Request QSA:D5:[Data1] 80h 0dB
- -
Response OSA:D5:[Data1]:[Data2] 8Ch 12dB
Control OSA:D2:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:D2:0&res=1
Audio Response OSA:D2:[Data] 0 Off
cam OSA:D2:[Data] -
Plugin Power Request QSA:D2 1 On
Response OSA:D2:[Data]
http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:7B:B3&res=1
Control OSE:7B:[Data] 00h
00h:OSD Mix Off
01h
01h:3G SDI On
02h
02h:HDMI On
10h
Response OSE:7B:[Data] 10h:IP/NDI|HX On
20h
20h:12G SDI On
OSD Mix 80h cam OSE:7B:[Data] -
80h:NDI On
Request QSE:7B
※bit0:3G SDI, bit1:HDMI,
bit4：IP/NDI|HX
Response OSE:7B:[Data] bit5:12G SDI, bit7:NDI

Control OSE:75:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:75:1&res=1

Response OSE:75:[Data] 0 Off
OSD Off With TALLY cam OSE:75:[Data] -
Request QSE:75 1 On
Response OSE:75:[Data]
Control OSA:88:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:88:0&res=1
Response OSA:88:[Data] 0 Off
OSD Status cam OSA:88:[Data] -
Request QSA:88 1 On
Response OSA:88:[Data]
Control #TAE[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23TAE1&res=1
Response tAE[Data] 0 Disable
TALLY Enable ptz tAE[Data] tAE[Data]
Request #TAE 1 Enable
Response tAE[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 45

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
制御 OSJ:D9:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:D9:0&res=1
応答 OSJ:D9:[Data] 0 Unlimited
Tally LED Limit R cam OSJ:D9:[Data] OSJ:D9:[Data]
要求 QSJ:D9 1 Limited
応答 OSJ:D9:[Data]
制御 OSJ:DA:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:DA:0&res=1
応答 OSJ:DA:[Data] 0 Unlimited
Tally LED Limit G cam OSJ:DA:[Data] OSJ:DA:[Data]
要求 QSJ:DA 1 Limited
応答 OSJ:DA:[Data]
Control OSA:D3:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSA:D3:0&res=1
0 Low
Response OSA:D3:[Data]
Tally Brightness 1 Mid cam OSA:D3:[Data] -
Request QSA:D3
2 High
Response OSA:D3:[Data]
Control TLR:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=TLR:1&res=1
Response TLR:[Data] 0 Off
R-Tally Control cam TLR:[Data] TLR:[Data]
Request QLR 1 On
Response OLR:[Data]
Control #DA[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23DA1&res=1
Response dA[Data] 0 Off
R-Tally Control ptz dA[Data] dA[Data]
Request #DA 1 On
Response dA[Data]
Control TLG:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=TLG:1&res=1
Response TLG:[Data] 0 Off
G-Tally Control cam TLG:[Data] TLG:[Data]
Request QLG 1 On
Response OLG:[Data]
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23TAA&res=1
0 R-Tally Off
1 R-Tally On
Control - [Data2] [Data2]
0 Wired R-Tally In Off
1 Wired R-Tally In On
[Data3] [Data3]
0 Command R-Tally In Off
1 Command R-Tally In On
[Data4] [Data4]
Response - 0 G-Tally Off
1 G-Tally On tAA[Data1][Data
tAA[Data1][Data2][Da
[Data5] [Data5] 2][Data3][Data4
ta3][Data4][Data5][D
Tally Information 0 Wired G-Tally In Off ptz ][Data5][Data6]
ata6][Data7][Data8][
1 Wired G-Tally In On [Data7][Data8][
Data9]
[Data6] [Data6] Data9]
0 Command G-Tally In Off
Request #TAA
1 Command G-Tally In On
[Data7] [Data7]
0 Y-Tally Off
1 Y-Tally On
[Data8] [Data8]
tAA[Data1][Data2][Data3][ 0 Wired Y-Tally In Off
Response Data4][Data5][Data6][Data 1 Wired Y-Tally In On
7][Data8][Data9] [Data9] [Data9]
0 Command Y-Tally In Off
1 Command Y- Tally In On
Control #LMP[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LMP0&res=1
Response lMP[Data] 0 Disable
Status Lamp ptz lMP[Data] -
Request #LMP 1 Enable
Response lMP[Data]
Control OSJ:41:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:41:0&res=1
0 Off
Response OSJ:41:[Data]
External Output1 1 R-Tally cam OSJ:41:[Data] -
Request QSJ:41
2 G-Tally
Response OSJ:41:[Data]
Control OSJ:42:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:42:0&res=1
0 Off
Response OSJ:42:[Data]
External Output2 1 R-Tally cam OSJ:42:[Data] -
Request QSJ:42
2 G-Tally
Response OSJ:42:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 46

 UHD Crop
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSI:32:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:32:0&res=1
Crop Response OSI:32:[Data] 0 Full
cam OSI:32:[Data] OSI:32:[Data]
3G SDI Out Request QSI:32 1 Crop
Response OSI:32:[Data]
Control OSJ:93:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:93:0&res=1
Crop Response OSJ:93:[Data] 0 Full
cam OSJ:93:[Data] OSJ:93:[Data]
NDI Out Request QSJ:93 1 Crop
Response OSJ:93:[Data]
Control OSI:33:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:33:0&res=1
Crop Response OSI:33:[Data] 0 Full
cam OSI:33:[Data] OSI:33:[Data]
IP Out1 Request QSI:33 1 Crop
Response OSI:33:[Data]
Control OSJ:94:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:94:0&res=1
Crop Response OSJ:94:[Data] 0 Full
cam OSJ:94:[Data] OSJ:94:[Data]
IP Out2 Request QSJ:94 1 Crop
Response OSJ:94:[Data]
0 OFF http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:1A:0&res=1
Control OSI:1A:[Data1]
1 YL
2 G
Response OSI:1A:[Data1]
3 MG
Crop Marker cam OSI:1A:[Data1] OSI:1A:[Data1]
4 YL+G
Request QSI:1A 5 YL+MG
6 G+MG
Response OSI:1A:[Data1] 7 YL+G+MG
Control OSI:16:[Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:16:1&res=1
1 YL
Response OSI:16:[Data1]
Crop out 2 G cam OSI:16:[Data1] OSI:16:[Data1]
Request QSI:16
3 MG
Response OSI:16:[Data1]
Control OSI:17:[Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:17:1&res=1
1 YL
Response OSI:17:[Data1]
Crop Adjust 2 G cam OSI:17:[Data1] OSI:17:[Data1]
Request QSI:17
3 MG
Response OSI:17:[Data1]
Control OSJ:AF:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AF:000&res=1
000h 0
Response OSJ:AF:[Data] [Data]:even only
Crop H Position - - cam OSJ:AF:[Data] OSJ:AF:0x[Data]
Request QSJ:AF
C00h 3072
Response OSJ:AF:[Data]
Control OSJ:2F:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2F:000&res=1
000h 0
Response OSJ:2F:[Data] [Data]:even only
Crop H Position(Yl) - - cam OSJ:2F:[Data] OSJ:2F:0x[Data]
Request QSJ:2F
C00h 3072
Response OSJ:2F:[Data]
Control OSJ:31:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:31:000&res=1
000h 0
Response OSJ:31:[Data] [Data]:even only
Crop H Position(G) - - cam OSJ:31:[Data] OSJ:31:0x[Data]
Request QSJ:31
C00h 3072
Response OSJ:31:[Data]
Control OSJ:33:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:33:000&res=1
000h 0
Response OSJ:33:[Data] [Data]:even only
Crop H Position(Mg) - - cam OSJ:33:[Data] OSJ:33:0x[Data]
Request QSJ:33
C00h 3072
Response OSJ:33:[Data]
Control OSJ:B0:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:B0:000&res=1
000h 0
Response OSJ:B0:[Data]
Crop V Position - - cam OSJ:B0:[Data] OSJ:B0:0x[Data]
Request QSJ:B0
6C0h 1728
Response OSJ:B0:[Data]
Control OSJ:30:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:30:000&res=1
000h 0
Response OSJ:30:[Data]
Crop V Position(Yl) - - cam OSJ:30:[Data] OSJ:30:0x[Data]
Request QSJ:30
6C0h 1728
Response OSJ:30:[Data]
Control OSJ:32:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:32:000&res=1
000h 0
Response OSJ:32:[Data]
Crop V Position(G) - - cam OSJ:32:[Data] OSJ:32:0x[Data]
Request QSJ:32
6C0h 1728
Response OSJ:32:[Data]
Control OSJ:34:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:34:000&res=1
000h 0
Response OSJ:34:[Data]
Crop V Position(Mg) - - cam OSJ:34:[Data] OSJ:34:0x[Data]
Request QSJ:34
6C0h 1728
Response OSJ:34:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 47

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] H POS (YL) http://192.168.0.10/cgi-
000h 0 bin/aw_cam?cmd=OSJ:60:000:000:000:000:000:000&res=1
OSJ:60:[Data1]:[Data2]
Control :[Data3]:[Data4]:[Data - -
5]:[Data6] C00h 3072
[Data2] [Data2] V POS (YL)
000h 0
- - [Data1],[Data3],[Data5]:even only
6C0 1728
OSJ:60:[Data1]:[Data2]
[Data3] [Data3] H POS (G)
Response :[Data3]:[Data4]:[Data
000h 0
5]:[Data6]
- -
Get Crop H/V Position C00h 3072
cam - -
（Yl, G, Mg） [Data4] [Data4] V POS (G)
000h 0
- -
Request QSJ:60 6C0 1728
[Data5] [Data5] H POS (MG)
000h 0
- -
C00h 3072
OSJ:60:[Data1]:[Data2] [Data6] [Data6] V POS (MG)
Response :[Data3]:[Data4]:[Data 000h 0
5]:[Data6] - -
6C0h 3072
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSI:15:50:50&res=1
Control OSI:15:[Data1]:[Data2] 01 Left Max. Speed
- -
50 Stop
Response OSI:15:[Data1]:[Data2] - -
99 Right Max. Speed
Crop H/V Position
cam - -
Speed Control
[Data2] [Data2]
Request --- 01 Down Max. Speed
- -
50 Stop
Response --- - -
99 UP Max. Speed
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:5D:50:50&res=1
Control OSJ:5D:[Data1]:[Data2] 01 Left Max. Speed
- -
50 Stop
Response OSJ:5D:[Data1]:[Data2] - -
99 Right Max. Speed
Crop H/V Position
cam - -
Speed Control(Yl)
[Data2] [Data2]
Request --- 01 Down Max. Speed
- -
50 Stop
Response --- - -
99 UP Max. Speed
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:5E:50:50&res=1
Control OSJ:5E:[Data1]:[Data2] 01 Left Max. Speed
- -
50 Stop
Response OSJ:5E:[Data1]:[Data2] - -
99 Right Max. Speed
Crop H/V Position
cam - -
Speed Control(G)
[Data2] [Data2]
Request --- 01 Down Max. Speed
- -
50 Stop
Response --- - -
99 UP Max. Speed

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 48

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:5F:50:50&res=1
Control OSJ:5F:[Data1]:[Data2] 01 Left Max. Speed
- -
50 Stop
Response OSJ:5F:[Data1]:[Data2] - -
99 Right Max. Speed
Crop H/V Position
cam - -
Speed Control(Mg)
[Data2] [Data2]
Request --- 01 Down Max. Speed
- -
50 Stop
Response --- - -
99 UP Max. Speed
[Data1] [Data1] (YL) http://192.168.0.10/cgi-
OSJ:A0:[Data1]:[Data2] 01 Left Max. Speed bin/aw_cam?cmd=OSJ:A0:50:50:50:50:50:50&res=1
:[Data3]:[Data4]:[Data 50 Stop
Control
5]:[Data6] 99 Right Max. Speed
[Data2] [Data2] (YL)
01 Down Max. Speed
50 Stop
OSJ:A0:[Data1]:[Data2] 99 UP Max. Speed
:[Data3]:[Data4]:[Data [Data3] [Data3] (G)
Response
5]:[Data6] 01 Left Max. Speed
50 Stop
Crop H/V Position 99 Right Max. Speed
cam - -
Speed Control(Yl/G/Mg) [Data4] [Data4] (G)
01 Down Max. Speed
50 Stop
Request --- 99 UP Max. Speed
[Data5] [Data5] (MG)
01 Left Max. Speed
50 Stop
99 Right Max. Speed
[Data6] [Data6] (MG)
Response --- 01 Down Max. Speed
50 Stop
99 UP Max. Speed
Control OSJ:B1:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:B1:02EE0&res=1
02EE0h 120.00%
Response OSJ:B1:[Data]
Crop Zoom Ratio - - cam OSJ:B1:[Data] OSJ:B1:0x[Data]
Request QSJ:B1
0C350h 500.00%
Response OSJ:B1:[Data]
Control OSJ:98:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:98:02EE0&res=1
02EE0h 120.00%
Response OSJ:98:[Data]
Crop Zoom Ratio(Yl) - - cam OSJ:98:[Data] OSJ:98:0x[Data]
Request QSJ:98
0C350h 500.00%
Response OSJ:98:[Data]
Control OSJ:99:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:99:02EE0&res=1
02EE0h 120.00%
Response OSJ:99:[Data]
Crop Zoom Ratio(G) - - cam OSJ:99:[Data] OSJ:99:0x[Data]
Request QSJ:99
0C350h 500.00%
Response OSJ:99:[Data]
Control OSJ:9A:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:9A:02EE0&res=1
02EE0h 120.00%
Response OSJ:9A:[Data]
Crop Zoom Ratio(Mg) - - cam OSJ:9A:[Data] OSJ:9A:0x[Data]
Request QSJ:9A
0C350h 500.00%
Response OSJ:9A:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 49

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] Zoom Ratio (YL) http://192.168.0.10/cgi-
OSJ:9B:[Data1]:[Data2] bin/aw_cam?cmd=OSJ:9B:02EE0:02EE0:02EE0&res=1
Control 02EE0h 120.00%
:[Data3]
- -
0C350h 500.00%
OSJ:9B:[Data1]:[Data2]
Response [Data2] [Data2] Zoom Ratio (G)
:[Data3]
Crop Zoom Ratio 02EE0h 120.00%
cam - -
(YL/G/MG) - -
Request QSJ:9B 0C350h 500.00%

[Data3] [Data3] Zoom Ratio (MG)

02EE0h 120.00%
OSJ:9B:[Data1]:[Data2] - -
Response
:[Data3] 0C350h 500.00%

Control OSJ:9C:[Data] 01 Wide Max. Speed http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:9C:50&res=1

- -
Response OSJ:9C:[Data] 49 Wide Min. Speed
Crop Zoom Ratio
50 Stop cam - -
Speed Control
Request --- 51 Tele Min. Speed
- -
Response --- 99 Tele Max. Speed
01 Wide Max. Speed http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:9D:50&res=1
Control OSJ:9D:[Data]
- -
Response OSJ:9D:[Data] 49 Wide Min. Speed
Crop Zoom Ratio
50 Stop cam - -
Speed Control(Yl)
Request --- 51 Tele Min. Speed
- -
Response --- 99 Tele Max. Speed
01 Wide Max. Speed http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:9E:50&res=1
Control OSJ:9E:[Data]
- -
Response OSJ:9E:[Data] 49 Wide Min. Speed
Crop Zoom Ratio
50 Stop cam - -
Speed Control(G)
Request --- 51 Tele Min. Speed
- -
Response --- 99 Tele Max. Speed
01 Wide Max. Speed http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:9F:50&res=1
Control OSJ:9F:[Data]
- -
Response OSJ:9F:[Data] 49 Wide Min. Speed
Crop Zoom Ratio
50 Stop cam - -
Speed Control(Mg)
Request --- 51 Tele Min. Speed
- -
Response --- 99 Tele Max. Speed

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 50

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] (YL) http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A1:50:50:50&res=1
01 Wide Max. Speed
OSJ:A1:[Data1]:[Data2] - -
Control
:[Data3] 49 Wide Min. Speed
50 Stop
51 Tele Min. Speed
- -
99 Tele Max. Speed
OSJ:A1:[Data1]:[Data2] [Data2] [Data2] (G)
Response
:[Data3] 01 Wide Max. Speed
- -
Crop Zoom Ratio 49 Wide Min. Speed
cam - -
Speed Control(Yl/G/Mg) 50 Stop
51 Tele Min. Speed
- -
Request --- 99 Tele Max. Speed
[Data3] [Data3] (MG)
01 Wide Max. Speed
- -
49 Wide Min. Speed
50 Stop
Response --- 51 Tele Min. Speed
- -
99 Tele Max. Speed
[Data1]YL H Crop http://192.168.0.10/cgi-
[Data1] Position bin/aw_cam?cmd=OSJ:C2:01:01:50:50:99:99:30:50:70&res=1
OSJ:C2:[Data1]:[Data2] 01-50-99 Left Max. Spd - Stop -
:[Data3]:[Data4]:[Data Right Max. Spd
Control [Data2] [Data2]YL V Crop
5]:[Data6]:[Data7]:[Da
ta8]:[Data9] 01-50-99 Position
Down Max. Spd - Stop -
[Data3] UP Max. Spd
01-50-99 [Data3]G H Crop Position
Left Max. Spd - Stop -
OSJ:C2:[Data1]:[Data2] [Data4] Right Max. Spd
:[Data3]:[Data4]:[Data 01-50-99 [Data4]G V Crop Position
Response Down Max. Spd - Stop -
5]:[Data6]:[Data7]:[Da
ta8]:[Data9] [Data5] UP Max. Spd
01-50-99 [Data5]MG H Crop
Crop Position / Crop Zoom
Position
Position Speed Control cam - -
[Data6] Left Max. Spd - Stop -
(YL/G/MG)
01-50-99 Right Max. Spd
[Data6]MG V Crop
[Data7] Position
Request -
01-50-99 Down Max. Spd - Stop -
UP Max. Spd
[Data7] YL Crop Zoom
[Data8] Position
01-50-99 Wide Max. Spd - Stop -
Tele Max. Spd
[Data8] G Crop Zoom
Response - [Data9] Position
01-50-99 Wide Max. Spd - Stop -
Tele Max. Spd
[Data9]MG Crop Zoom
Position

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 51

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
http://192.168.0.10/cgi-bin/aw_cam?cmd=QSJ:C3&res=1
[Data1] [Data1] H POS (YL)
000h - C00h 0 - 3072
Control - [Data2] [Data2] V POS (YL)
000h - 6C0h 0 - 1728

[Data3] [Data3] H POS (G)

000h - C00h 0 - 3072

[Data4] [Data4] V POS (G)

Response - 000h - 6C0h 0 - 1728

[Data5] [Data5] H POS (MG)

000h - C00h 0 - 3072
Request Crop Position /
cam - -
Crop Zoom Position
[Data6] [Data6] V POS (MG)
000h - 6C0h 0 - 1728

Request QSJ:C3 [Data7] [Data7] Zoom Ratio (YL)

02EE0h - 120.00% - 500.00%
0C350h

[Data8] [Data8] Zoom Ratio (G)

02EE0h - 120.00% - 500.00%
OSJ:C3:[Data1]:[Data2] 0C350h
:[Data3]:[Data4]:[Data
Response
5]:[Data6]:[Data7]:[Da [Data9] [Data9] Zoom Ratio (MG)
ta8]:[Data9] 02EE0h - 120.00% - 500.00%
0C350h

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 52

 Pan/Tilt
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control #INS[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23INS1&res=1
Response #INS[Data] 0 Desktop
Install Positon ptz iNS[Data] iNS[Data]
Request #INS 1 Hanging
Response iNS[Data]
Control #SPF[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23SPF1&res=1
Response sPF[Data] 0 Off
Smart Picture Flip ptz sPF[Data] -
Request #SPF 1 Auto
Response sPF[Data]
Control - http://192.168.0.10/cgi-bin/aw_cam?cmd=QFS&res=1
Response - 0 Normal
Flip Status cam - -
Request QFS 1 Flip
Response OFS:[Data]
Control #FDA[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23SPF5A&res=1
3Ch 60deg
Response fDA[Data]
Flip Detect Angle - - ptz fDA[Data] -
Request #FDA
78h 120deg
Response fDA[Data]
Control OSJ:2D:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2D:0&res=1
0 Normal(60deg/s)
Response OSJ:2D:[Data]
P/T Speed Mode 1 Fast1(90deg/s) cam OSJ:2D:[Data] OSJ:2D:[Data]
Request QSJ:2D
2 Fast2(180deg/s)
Response OSJ:2D:[Data]
Control OSJ:A2:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A2:0&res=1
Response OSJ:A2:[Data] 0 Manual
P/T Acceleration cam OSJ:A2:[Data] OSJ:A2:[Data]
Request QSJ:A2 1 Auto
Response OSJ:A2:[Data]
Control OSJ:A3:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A3:00&res=1
00h 0
Response OSJ:A3:[Data]
P/T Rise S-Curve - - cam OSJ:A3:[Data] OSJ:A3:0x[Data]
Request QSJ:A3
1E 30
Response OSJ:A3:[Data]
Control OSJ:A4:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A4:00&res=1
00h 0
Response OSJ:A4:[Data]
P/T Fall S-Curve - - cam OSJ:A4:[Data] OSJ:A4:0x[Data]
Request QSJ:A4
1E 30
Response OSJ:A4:[Data]
Control OSJ:A5:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A5:01&res=1
01h 1
Response OSJ:A5:[Data]
P/T Rise Acceleration - - cam OSJ:A5:[Data] OSJ:A5:0x[Data]
Request QSJ:A5
FFh 255
Response OSJ:A5:[Data]
Control OSJ:A6:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A6:01&res=1
01h 1
Response OSJ:A6:[Data]
P/T Fall Acceleration - - cam OSJ:A6:[Data] OSJ:A6:0x[Data]
Request QSJ:A6
FFh 255
Response OSJ:A6:[Data]
Control #SWZ[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23SWZ1&res=1
Response sWZ[Data] 0 Off
Speed With Zoom Position ptz sWZ[Data] sWZ[Data]
Request #SWZ 1 On
Response sWZ[Data]
Control OAZ:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OAZ:0&res=1
Response OAZ:[Data] 0 Off
Focus Adjust With PTZ. cam OAZ:[Data] OAZ:[Data]
Request QAZ 1 On
Response OAZ:[Data]
Control OSJ:A7:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A7:0&res=1
Response OSJ:A7:[Data] 0 Off
Privacy Mode cam OSJ:A7:[Data] OSJ:A7:[Data]
Request QSJ:A7 1 On
Response OSJ:A7:[Data]
Control OSJ:45:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:45:1&res=1
1 Standby
Response OSJ:45:[Data]
Power On Position 2 Home cam OSJ:45:[Data] OSJ:45:[Data]
Request QSJ:45
3 Preset
Response OSJ:45:[Data]
Control OSJ:46:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:46:00&res=1
00 Preset001
Response OSJ:46:[Data]
Power On Preset Number - - cam OSJ:46:[Data] OSJ:46:[Data]
Request QSJ:46
99 Preset100
Response OSJ:46:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 53

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control #P[Data] 01 Left Max. Speed http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23P50&res=1
Response pS[Data] - -
Pan Speed Control 50 Stop ptz - -
Request - - -
Response - 99 Right Max. Speed
Control #T[Data] 01 Down Max. Speed http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23T50&res=1
Response tS[Data] - -
Tilt Speed Control 50 Stop ptz - -
Request - - -
Response - 99 UP Max. Speed
http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PTS5050&res=1
Control #PTS[Data1][Data2]
[Data1] [Data1]
01 Left Max. Speed
- -
50 Stop
Response pTS[Data1][Data2] - -
99 Right Max. Speed
P/T Speed Control ptz - -
[Data2] [Data2]
Request - 01 Down Max. Speed
- -
50 Stop
- -
99 UP Max. Speed
Response -

[Data1] [Data1]Pan Position http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23APC80008000&res=1

Control #APC[Data1][Data2] 0000h CCW Limit
- -
8000h Center Pan : 2D09(–175deg) – D2F5(+175deg)
Response aPC[Data1][Data2] - - Tilt : 5555(–30deg) – 8E38(+90deg)
FFFFh CW Limit
P/T Absolute aPC[Data1][Data
ptz -
Position Control 2]
[Data2] [Data2]Tilt Position
Request - 0000h UP Limit
- -
8000h Center
Response - - -
FFFFh DOWN Limit
[Data1] [Data1]Pan Position http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RPC80008000&res=1
Control #RPC[Data1][Data2] 0000h CCW Limit
- -
8000h Center
Response rPC[Data1][Data2] - -
FFFFh CW Limit
P/T Relative Position Control ptz - -
[Data2] [Data2]Tilt Position
Request - 0000h UP Limit
- -
8000h Center
Response - - -
FFFFh DOWN Limit

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 54

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
http://192.168.0.10/cgi-
[Data1] [Data1]Pan Position bin/aw_ptz?cmd=%23APS800080001D0&res=1
#APS[Data1][Data2][Data 0000h CCW Limit
Control - -
3][Data4]
8000h Center
- -
FFFFh CW Limit
Pan : 2D09(–175deg) – D2F5(+175deg)
Tilt : 5555(–30deg) – 8E38(+90deg)
[Data2] [Data2]Tilt Position
aPS[Data1][Data2][Data
Response 0000h UP Limit
3][Data4]
- -
8000h Center
P/T Absolute Position Control
- - ptz - -
with Speed
FFFFh DOWN Limit

Request - [Data3] [Data3]Preset Speed

00h 1
- -
1Dh 30

[Data4] [Data4]Preset Speed Table

Response - 0 SLOW
1 MID
2 FAST
http://192.168.0.10/cgi-
[Data1] [Data1]Pan Position bin/aw_ptz?cmd=%23RPS800080001D0&res=1
#RPS[Data1][Data2][Dat 0000h CCW Limit
Control - -
a3][Data4]
8000h Center
- -
FFFFh CW Limit

[Data2] [Data2]Tilt Position

rPS[Data1][Data2][Data
Response 0000h UP Limit
3][Data4]
- -
8000h Center
P/T Relative Position
- - ptz - -
Control with Speed
FFFFh DOWN Limit

Request - [Data3] [Data3]Preset Speed

00h 1
- -
1Dh 30

[Data4] [Data4]Preset Speed Table

Response - 0 SLOW
1 MID
2 FAST

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 55

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23LC11&res=1
Control #LC[Data1][Data2]
1 Tilt Up
2 Tilt Down
Response lC[Data1][Data2] lC1[Data2]
3 Pan Left
lC2[Data2]
Limitation Control 4 Pan Right ptz lC[Data1][Data2]
lC3[Data2]
Request #LC[Data1] lC4[Data2]
[Data2] [Data2]
0 Release
Response lC[Data1][Data2] 1 Set
Controller -> http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23L1&res=1
Control #L[Data] P/T
1 Tilt Up
2 Tilt Down
Response l[Data] 3 Pan Left
Limitation Control(toggle) 4 Pan Right ptz - -
Request -
P/T ->
Controller
Response - 0 Release
1 Set

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 56

 Preset
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSJ:29:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:29:0&res=1
Response OSJ:29:[Data] 0 Speed Table
Preset Speed Unit cam OSJ:29:[Data] OSJ:29:[Data]
Request QSJ:29 1 Time
Response OSJ:29:[Data]
Control #PST[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PST0&res=1
Response pST[Data] 0 Slow
Preset Speed Table ptz pST[Data] pST[Data]
Request #PST 2 Fast
Response pST[Data]
Control #UPVS[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23UPVS250&res=1
Preset Speed Unit : Speed
001-275:1
276-301:2
302-327:3
328-353:4
Response uPVS[Data] 354-379:5
380-404:6
405-430:7
431-456:8
457-482:9
483-508:10
Preset Speed Unit :Speed 509-534:11
000 30 : MaxSpeed 535-559:12
250 1 : Slow 560-585:13
- ～ 586-611:14
Preset Speed 999 30 : Fast ptz uPVS[Data] uPVS[Data] 612-637:15
Request #UPVS
Preset Speed Unit :Time 638-663:16
001h 1秒 664-689:17
- ～ 690-714:18
063h 99秒 715-740:19
741-766:20
767-792:21
793-818:22
819-844:23
845-869:24
870-895:25
Response uPVS[Data] 896-921:26
922-947:27
948-973:28
974-998:29
999,000:30

Control OSJ:A8:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A8:0&res=1

Response OSJ:A8:[Data] 0 Manual
Preset Acceleration cam OSJ:A8:[Data] OSJ:A8:[Data]
Request QSJ:A8 1 Auto
Response OSJ:A8:[Data]
Control OSJ:A9:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:A9:00&res=1
00h 0
Response OSJ:A9:[Data]
Preset Rise S-Curve - - cam OSJ:A9:[Data] OSJ:A9:0x[Data]
Request QSJ:A9
1E 30
Response OSJ:A9:[Data]
Control OSJ:AA:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AA:00&res=1
00h 0
Response OSJ:AA:[Data]
Preset Fall S-Curve - - cam OSJ:AA:[Data] OSJ:AA:0x[Data]
Request QSJ:AA
1E 30
Response OSJ:AA:[Data]
Control OSJ:AB:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AB:01&res=1
01h 1
Response OSJ:AB:[Data]
Preset Rise Acceleration - - cam OSJ:AB:[Data] OSJ:AB:0x[Data]
Request QSJ:AB
FFh 255
Response OSJ:AB:[Data]
Control OSJ:AC:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AC:01&res=1
01h 1
Response OSJ:AC:[Data]
Preset Fall Acceleration - - cam OSJ:AC:[Data] OSJ:AC:0x[Data]
Request QSJ:AC
FFh 255
Response OSJ:AC:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 57

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSJ:AD:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AD:01&res=1
01h 0.1s
Response OSJ:AD:[Data]
Preset Rise Ramp Time - - cam OSJ:AD:[Data] OSJ:AD:0x[Data]
Request QSJ:AD
64h 10.0s
Response OSJ:AD:[Data]
Control OSJ:AE:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:AE:01&res=1
01h 0.1s
Response OSJ:AE:[Data]
Preset Fall Ramp Time - - cam OSJ:AE:[Data] OSJ:AE:0x[Data]
Request QSJ:AE
64h 10.0s
Response OSJ:AE:[Data]
Control OSE:71:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:71:0&res=1
0 MODE A
Response OSE:71:[Data]
Preset Scope 1 MODE B cam OSE:71:[Data] OSE:71:[Data]
Request QSE:71
2 MODE C
Response OSE:71:[Data]
Control OSE:7C:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:7C:0&res=1
Response OSE:7C:[Data] 0 Off
Preset D-Extender cam OSE:7C:[Data] OSE:7C:[Data]
Request QSE:7C 1 On
Response OSE:7C:[Data]
Control OSJ:2A:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2A:0&res=1
Response OSJ:2A:[Data] 0 Off
Preset Crop cam OSJ:2A:[Data] OSJ:2A:0x[Data]
Request QSJ:2A 1 On
Response OSJ:2A:[Data]
Control OSJ:2B:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2B:0&res=1
Response OSJ:2B:[Data] 0 Off
Preset Thumbnail Update cam OSJ:2B:[Data] OSJ:2B:0x[Data]
Request QSJ:2B 1 On
Response OSJ:2B:[Data]
Control OSJ:2C:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:2C:0&res=1
Response OSJ:2C:[Data] 0 Reset
Preset Name cam OSJ:2C:[Data] OSJ:2C:0x[Data]
Request QSJ:2C 1 Hold
Response OSJ:2C:[Data]
Control OSJ:5B:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:5B:0&res=1
Response OSJ:5B:[Data] 0 Off
Preset Iris cam OSJ:5B:[Data] OSJ:5B:[Data]
Request QSJ:5B 1 On
Response OSJ:5B:[Data]
Control OSE:7D:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSE:7D:0&res=1
Response OSE:7D:[Data] 0 Mode A
Preset Zoom Mode cam OSE:7D:[Data] OSE:7D:[Data]
Request QSE:7D 1 Mode B
Response OSE:7D:[Data]
Control #PRF[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PRF0&res=1
Response pRF[Data] 0 Off
Freeze During Preset ptz pRF[Data] pRF[Data]
Request #PRF 1 On
Response pRF[Data]
Control #R[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23R00&res=1
00 Preset001
Response s[Data]
Recall Preset Memory - - ptz - -
Request -
99 Preset100
Response -
Control #M[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23M00&res=1
00 Preset001
Response s[Data]
Save Preset Memory - - ptz - -
Request -
99 Preset100
Response -
Control #C[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23C00&res=1
00 Preset001
Response s[Data]
Delete Preset Memory - - ptz - -
Request -
99 Preset100
Response -

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 58

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PE00&res=1
00h multiple
Control - - (each 40 Presert No)
02h

[Data2] [Data2]
0000000000h
Response - -
FFFFFFFFFFh pE00[Data2]
Preset Entry
(bit0) PRESET No.(Data1*40 +1) ptz pE[Data1][Data2] pE01[Data2]
Confirmation
0 No Entry pE02[Data2]
1 Entry
Request #PE[Data1]
(bit1) PRESET No.(Data1*40 +2)
0 No Entry
1 Entry
- -
Response pE[Data1][Data2] (39bit) PRESET No.(Data1*40 +40)
0 No Entry
1 Entry
Control - http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23S&res=1
00 Preset001
Request Latest Recall Response -
- - ptz s[Data] s[Data]
Preset No. Request #S
99 Preset100
Response s[Data]
Control -
00 Preset001
Response q[Data]
Preset completion notification - - ptz q[Data] -
Request -
99 Preset100
Response -
Control OSJ:35:[Data1]:[Data2] [Data1] [Data1] http://192.168.0.10/cgi-
00h Preset001 bin/aw_cam?cmd=OSJ:35:00:xxxxxxxxxxxxxxx&res=1
Response OSJ:35:[Data1]:[Data2] - -
Save Preset Name 99h Preset100 cam OSJ:35:[Data1]:[Data2] -
Request QSJ:35:[Data1] [Data2] [Data2]
xxxxxxxxxxx Preset Name (Fixed 15
Response OSJ:35:[Data1]:[Data2] xxxx Charactors)
Control OSJ:36:[Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:36:00&res=1
00 Preset001
Delete Preset Name Response OSJ:36:[Data]
- - cam OSJ:36:[Data] -
(Single) Request -
99 Preset100
Response -
Control OSJ:37 http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:37&res=1
Delete Preset Name Response OSJ:37
cam OSJ:37 -
(All) Request -
Response -
Control OSJ:39:[Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:39:00&res=1
00 Preset001
Response OSJ:39:[Data]
Update Preset Thumbnail - - cam OSJ:39:[Data] -
Request
99 Preset100
Response
Control OSJ:3A:[Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:3A:00&res=1
00 Preset001
Delete Preset Thumbnail Response OSJ:3A:[Data]
- - cam OSJ:3A:[Data] -
(Single) Request -
99 Preset100
Response -
Control OSJ:3B http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:3B&res=1
Delete Preset Thumbnail Response OSJ:3B
cam OSJ:3B -
(All) Request -
Response -

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 59

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=QSJ:3C:00&res=1
00h Preset 001-009
Control - 01h Preset 010-018
02h Preset 019-027
03h Preset 028-036
04h Preset 037-045
Response - 05h Preset 046-054
06h Preset 055-063
Preset Name/Preset Thumbnail
07h Preset 064-072 cam - -
Counter
08h Preset 073-081
Request QSJ:3C:[Data1] 09h Preset 082-090
0Ah Preset 091-099
0Bh Preset 100
[Data2] [Data2]
000000000h 000000000h
Response OSJ:3C:[Data1]:[Data2]
- -
FFFFFFFFFh FFFFFFFFFh
See Capter.6 for Preset sequence

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 60

 Convenient command
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] (Gain) http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PTG&res=1
08h 0dB
- -
Control - 11h 9dB
- -
1Ah 18dB
- -
32h 42dB
80h AGC ON
[Data2] [Data2]
00000h 0K
Response - - -
3A98h 15000K
[Data3] [Data3] (Shutter Mode)
0h Off
Get Gain/Color
1h step ptz - -
Temperature/Shutter/ND
2h Syncro
3h ELC
[Data4] [Data4] (Shutter Step)
Request #PTG 0001h 1/1
- -
2710 h 1/10000
[Data5] [Data5](Shutter Synchro)
00000h 0.0 [Hz]
- -
pTG[Data1][Data2][Data 186A0h 10000.0[Hz]
3][Data4][Data5][Data6 [Data6] [Data6] (ND)
Response 0 Throgh
]
1 1/4 ND
2 1/16 ND
3 1/64 ND
[Data1] [Data1] (Pan) http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PTV&res=1
0000h ccwLimit
Control - - -
8000h Center
- -
FFFFh cwLimit
[Data2] [Data2] (Tilt)
0000h UpLimit
- -
Response -
8000h Center
- -
Get FFFFh DownLimit
ptz - -
Pan/Tilt/Zoom/Focus/Iris [Data3] [Data3] (Zoom)
555h Wide
- -
Request #PTV FFFh Tele
[Data4] [Data4] (Focus)
555h Near
- -
FFFh Far
pTV[Data1][Data2][Data [Data5] [Data5] (Iris)
Response 555h Close
3][Data4][Data5]
- -
FFFh Open

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 61

 Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
[Data1] [Data1] (Pan) http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PTD&res=1
0000h 0000h
Control - - -
FFFFh FFFFh
[Data2] [Data2] (Tilt)
0000h 0000h
- -
Response - FFFFh FFFFh
[Data3] [Data3] (Zoom)
000h 0
Get
- - ptz - -
Pan/Tilt/Zoom/Focus/Iris
3E7h 999
[Data4] [Data4] (Focus)
Request #PTD 00h 0
- -
63h 99
[Data5] [Data5] (Iris)
00h F0.0
pTD[Data1][Data2][Data
Response - -
3][Data4][Data5]
FEh F25.4
FFh CLOSE

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 62

 OSD
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control DUS:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DUS:1&res=1
Response DUS:[Data] 0 Off
Menu On/Off cam - OUS:[Data]
Request QUS 1 On
Response OUS:[Data]
Control DPG:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DPG&res=1
Response DPG:[Data]
Menu Cancel 1 Cancel cam - -
Request -
Response -
Control DIT:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DIT&res=1
Response DIT:[Data]
Menu Enter 1 Enter cam - -
Request -
Response -
Control DUP:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DUP&res=1
Response DUP:[Data]
Menu Up 1 Up cam - -
Request -
Response -
Control DDW:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DDW&res=1
Response DDW:[Data]
Menu Down 1 Down cam - -
Request -
Response -
Control DRT:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DRT&res=1
Response DRT:[Data]
Menu Right 1 Right cam - -
Request -
Response -
Control DLT:[Data] http://192.168.0.10/cgi-bin/aw_cam?cmd=DLT&res=1
Response DLT:[Data]
Menu Left 1 Left cam - -
Request -
Response -

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 63

 Remote Controller
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control OSJ:3E:[Data] http://192.168.0.10/cgi-
Response OSJ:3E:[Data] Any Information bin/aw_cam?cmd=OSJ:3E:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Operation Lock xxxxxxxx cam - -
Request - (40 Charactors) xx&res=1
Response -
Control OSJ:3F http://192.168.0.10/cgi-bin/aw_cam?cmd=OSJ:3F&res=1
Response OSJ:3F
Release Operation Lock - - cam - -
Request -
Response -
Control - [Data1] http://192.168.0.10/cgi-bin/aw_cam?cmd=QSJ:40&res=1
[Data1]
Unlock
Response - 0
Lock OSJ:40:[Data1]:[D
Operation Lock Status 1 cam OSJ:40:[Data1]:[Data2]
Request QSJ:40 [Data2] ata2]
[Data2]
Any Information
xxxxxxxx
Response OSJ:40:[Data1]:[Data2] (40 Charactors)

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 64

 Maintenance
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control - Normal http://192.168.0.10/cgi-bin/aw_cam?cmd=QER&res=1
0
Response - Fan Error
Error Information 1 cam OER:[Data] OER:[Data]
Request QER Other Error
2
Response OER:[Data]
00000000h No Error http://192.168.0.10/cgi-bin/aw_cam?cmd=QSI:46&res=1
Control - 00000001h Fan Error
00000002h High Temperature
00000004h Lens Error
Response - 00000008h Pan/Tilt Error
00000010h Sensor Error
Error Information cam OSI:46:[Data] OSI:46:0x[Data]
Request QSI:46 ※bit0:Fan Error, bit1:High
Temperature,
bit2:Lens Error, bit3:Pan/Tilt
Response OSI:46:[Data] Error,
bit4:Sensor Error
http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RER&res=1
03h
Control - 21h Motor Driver Error
22h System Error
24h Spec Limit Over
NET Life-monitoring Error
29h CAM Life-monitoring Error
Fan1 error
Response -
31h High Temp
33h Low Temp
Latest Error Information 36h Temp Sensor Error ptz rER[Data] -
40h Lens Initialize Error
41h PT. Initialize Error
Request #RER 42h PoE++ Software auth.
43h Timeout
MR Level Error
50h MR Offset Error
52h Gyro Error
Response rER[Data] 57h PT. Initialize Error
58h

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 65

 Others
Command name Category Command Data value Setting Comand type Update notification camdata.html Usage example / Remarks
Control - http://192.168.0.10/cgi-bin/aw_cam?cmd=QID&res=1
Response -
Model Number AW-UE100 cam - OID:AW-UE100
Request QID
Response OID:[Data]
Control - http://192.168.0.10/cgi-bin/aw_cam?cmd=QSV&res=1
Software Version Response VXX.XX
- cam - -
(System Version) Request QSV ※例 V01.00
Response OSV:[Data1]
[Data1] [Data1] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23QSV&res=1
0 Servo CPU
Control - 1 Camera CPU
2 ZYNQ Network
3 Main/Network CPU
4 ZYNQ Logic
5 ZYNQ R5T
6 Lens CPU
Response - 7 ZYNQ R5R
8 ZYNQ Enc
9 BE EEPROM
Software Version [Data2] [Data2] ptz - -
00-99 MAJOR VERSION
[Data3] [Data3]
Request #QSV[Data1] 00-99 MINOR VERSION
[Data4] [Data4]
E (Debug Build)
L (Release Build)
[Data5] [Data5]
qSV[Data1]V[Data2].[Da 00-99 (REVISION)
Response ta3][Data4][Data5][dat [data6] [data6]
a6] 0 NTSC
1 PAL
Control #O[Data] http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23O0&res=1
Response p[Data] 0 Standby
Power On / Standby ptz p[Data] p[Data]
Request #O 1 PowerOn
Response p[Data]
Control #RZL[Data] 0 640x360 http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RZL0&res=1
Response rZL[Data] 1 320x180
Resolution Control ptz rZL[Data] -
Request #RZL 2 1280x720
Response rZL[Data] 3 1920x1080
Control OSJ:5C:[Data] http://192.168.0.10/cgi-
Response OSJ:5C:[Data] Camera Title (Fixed 40 bin/aw_cam?cmd=OSJ:5C:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Camera Title xxxxxxxx cam OSJ:5C:[Data] OSJ:5C:[Data]
Request QSJ:5C Charactors : ASCII CODE) xx&res=1
Response OSJ:5C:[Data]

© Panasonic Connect Co., Ltd. 2022 All Rights Reserved. 66