Scribd
Upload
29 views

Instruction Sheet 579 163: Simulation ABS/Ti, STE 2/50

This document provides instructions for using a plug-in element that can generate adjustable square wave signals to simulate ABS or injection time signals. It has connections for power supply, ground, signal output, and can set the output frequency, duty cycle, and has an LED display. The simulator is well-suited for simulation signals needed by vehicle control units for functions like automatic driving, cruise control, and more. It provides technical details like an operating voltage range of 12-15V, output amplitude of 12-15V, frequency range of 1-1200Hz, and duty cycle range of 1-99%.

Uploaded by

Billel Talbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views

Instruction Sheet 579 163: Simulation ABS/Ti, STE 2/50

This document provides instructions for using a plug-in element that can generate adjustable square wave signals to simulate ABS or injection time signals. It has connections for power supply, ground, signal output, and can set the output frequency, duty cycle, and has an LED display. The simulator is well-suited for simulation signals needed by vehicle control units for functions like automatic driving, cruise control, and more. It provides technical details like an operating voltage range of 12-15V, output amplitude of 12-15V, frequency range of 1-1200Hz, and duty cycle range of 1-99%.

Uploaded by

Billel Talbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

12/12-W2010-Wei

Instruction sheet 579 163

Simulation ABS/Ti, STE 2/50

 Supply voltage connection


 Ground connection
 Signal output
 Output frequency setting
 Duty cycle setting
6
 LED display

1 Description 2 Application
Plug-in element to generate a square-wave signal with This signal simulator is particularly well suited for the
adjustable frequency and duty cycle for the simulation of vehicle's control units Automatic Drive, 739 600, Cruise
ABS signals (speed) or injection time signals (Ti). Control, 739 350 or Servotronic, 739 500 to provide the
ABS or injection time signals if the corresponding original
The following parameters can be set: control units are not available.
It also lends itself to generating the speed signal for the
Instrument Cluster Unit, 739 6021, the Tachome-
• ABS signal
ter/Speedometer digital, 739 6023 and the Cornering
• Injection time Light, 738 113.

3 Technical Data
Safety note
• Operating voltage: UB = +12 to +15 V=
- Before initial operation, make sure all ground connections • Output signal: square-wave
are plugged in!
• Output amplitude: Umax = +12 to +15 V=
- Only operate the device with an appropriate power sup-
ply. • Output frequency range: 1 Hz to 1.200 Hz
- Make sure all connections are correct. • Duty cycle: 1 % to 99 %
• Rating: Imax = 100 mA

LD DIDACTIC GMBH . Leyboldstrasse 1 . D-50354 Huerth . Phone (02233) 604-0 . Fax (02233) 604-222 . e-mail: [email protected]

 by LD Didactic GmbH Printed in the Federal Republic of Germany

You might also like