Scribd
Upload
198 views

Casing Running Tool Crti

This document summarizes the OWS Tubular Running Services Casing Running Tool (CRTi). The CRTi is designed for casing running or drilling with top drive equipped rigs, enabling connection makeup, breakout, circulation and rotation to increase the chance of getting casing to total depth on the first attempt. It uses a patented torque activated wedge grip technology operated solely by top drive control. The CRTi has a proven track record of running over three million meters of casing. It is certified according to international standards and reduces risks by keeping personnel out of hazard zones and providing full driller control.

Uploaded by

Luis Alberto Franco R
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
198 views

Casing Running Tool Crti

This document summarizes the OWS Tubular Running Services Casing Running Tool (CRTi). The CRTi is designed for casing running or drilling with top drive equipped rigs, enabling connection makeup, breakout, circulation and rotation to increase the chance of getting casing to total depth on the first attempt. It uses a patented torque activated wedge grip technology operated solely by top drive control. The CRTi has a proven track record of running over three million meters of casing. It is certified according to international standards and reduces risks by keeping personnel out of hazard zones and providing full driller control.

Uploaded by

Luis Alberto Franco R
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

OWS Tubular Running Services

Casing Running Tool


(CRTi)

The OWS CRTi tools are designed This patent pending architecture puts control in the hands of the
driller, increasing the success rate to get the casing installed the
for casing running or drilling with
first time. Rig-in and rig-out steps are simple, intuitive and fast.
top drive equipped rigs to enable This architecture has a proven track record in running over three
connection make-up, break-out, million meters of casing.

circulation and rotation, increasing Starting from the insertion diameter of the base tool, selectable
sizes of integral jaw/dies are used to configure the CRTi tool
the chance of getting casing to
to support gripping casing of increasing internal diameter
TD the first time. These tools are (decreasing weight). Through the use of a patent pending
mechanically activated in tension extended reach die structure, the gripping diameter can be
further increased to include casing sizes much greater than the
and both rotational directions
base tool.
solely by top drive control using
TAWG™ (Torque activated Wedge
grip) technology.
CRTI-1 8 5/8’’ SPECIFICATION SUMMARY

CRTi Load Rated Cap. 695 tons (631 MTonnes)

CRTi Max design torque* 85,000 ft/lbs (115,245 N-m)

Circulation Pressure 5000 psi

Total tool length 78’’(2 meters)

Tool Stroke 75’’

Minimum tool Diameter 8 5/8’’

Maximum tool Diameter 26’’

Through Hole 2’’

Min operating air pressure 40 psi

Max operating air pressure 120 psi

Tool joint 6 5/8’’ REG BOX

Min Operating Temperature -20 Degrees Celsius (-40)

CRTI 8 5/8’’CERTIFICATION

DET NORSKE VERITAS (DNV –OS-E101)

Tool design verification

And load rating according

To API 8C-PSL 1-2

CRTI 8 5/8’’CERTIFICATION CRTI 8 5/8’’CERTIFICATION


15 min rig up/rig out Driller in full control

Mechanically operated Reduced HSE exposure

Min equipment required Hands free operation

Push capability (120 ton) L Less equipment on site

Minimal Maintenance N No personnel in red zone

Wireless torque turn

Reading

*Maximum operating torque is limited by TDS Connections

NORWAY UNITED KINGDOM NETHERLANDS ROMANIA MIDDLE EAST,


Hammaren 19 Crawpeel Road Stehpensonweg 18ª Aricestii Rahtivani AFRICA, ASIA
P.O.Box 152 Altens Industrial Estate 7741 KW Coevorden –Ploiesti West Park Office 3201, 32nd floor
NO-4098 Tananger Altens Aberdeen AB12 3LG The Netherlands Cladirea SME, Mod 13&15, Tiffany Tower,
Norway Scotland Birou 3B W-Cluster, JLT
Tel: +31 (0) 524 527 000
107025-Prahova P.O. 17354
Tel: +47 51 64 84 00 Tel: +44(1)224 85 6000 Fax: +31 (0) 524 527 001
Romania Dubai UAE
Fax: +47 51 64 84 01 Fax:+44(1)224 85 6001 [email protected]
[email protected] [email protected] Tel: +40(0)344 220 102 / Tel: +971 4 3640500
+40 (0)344 220 106 Fax: +971 4 3640501
[email protected] [email protected]

You might also like