SOAL BIDANG LOMBA :

ELECTRONICS
APPLICATION

1
 LOMBA KOMPETENSI SISWA
SEKOLAH MENENGAH KEJURUAN
TINGKAT NASIONAL XXV TAHUN 2017

DESKRIPSI TEKNIS

BIDANG LOMBA

ELECTRONICS APPLICATION

2
 Bandung, 2017
www.inaskills-electronics.com

TECHNICAL DESCRIPTION
ELECTRONICS
Page 0 of 9
MANUFACTURING AND ENGINEERING TECHNOLOGY
 INTRODUCTION
1.1. Name and Description of Skill
1.1.1. The name of the skill is Electronics.
1.1.2. Description of Skill
The electronics industry is very diverse and has evolved into several
specialisms. Some technicians/engineers will work across many
aspects of electronics, but increasing specialization and technical
developments means that specialist technician/engineers are widely
employed.
The key areas of specialism which can be seen as careers in their
own right include the assembly and wiring of electronic products; the
designing of prototype circuits to specifications; the installation and
commissioning of equipment including the provision of customer
support; service and maintenance which include a service both in
site and remotely; and monitoring and testing to specifications
subassemblies or systems and approving fit-for-purpose and
simulating outcomes on computers.
Electronics specialists need to work in a wide range of industries by
supporting highly technical specialist equipment. These industries
include:
Aerospace/aeronautics
The military
Robotics
Audio/TV/entertainment
Laboratories and hospitals
Higher education research laboratories
Communications and telecommunications
Power
Transport

Manufacturing including instrumentation

Electronics technicians/engineers must work with a high degree
of accuracy and precision, conforming to detailed specifications
and international quality standards and demonstrating extensive
technical ability.
Due to the constant developments in technology, the electronics
technician/engineer needs to be proactive in ensuring that his/her
skills and knowledge are up-to-date and meet industry standards
and expectations.
The technician/engineer may work directly with clients and will
therefore need to demonstrate excellent customer service and
communication skills and work effectively to time schedules. When
working with clients, the technician/engineer may have to explain
Page 1 of 9
 elements of complex electronics principles to assist the client to use
equipment correctly. Often the nature of the establishment in which
the electronics expert works will require him/her to respect
confidentiality with respect to highly commercially sensitive
information and to demonstrate integrity, honesty and a strong
ethical sense.
The electronics specialist will work with a wide range of tools,
Specialist hi-tech equipment and materials. Increasingly, computers
and specialist software for communications technology is embedded
into the work. In addition, tasks will also require the use of specialist
hand tools for the assembly and maintenance of circuits and surface
mounted technology.

1.2. Scope of Application

1.2.1. Every Competitor must know this Technical Description.
1.2.2. In the event, English or Indonesian is official language.

1.3. Associated Documents

As this Technical Description contains only skill-specific information it
must be used in association with the following:
 LKS- Competition Rules

2. COMPETENCY AND SCOPE OF WORK

2.1. Competency Specification

2.1.1. General Competency
 Creativity.
 Critical thinking.
 Honesty and integrity.
 Self-motivation.
 Problem-solving skills.
 Work under pressure.
 Able to do environmentally friendly operation.

2.1.2. Competency for all modules

Skills to do measurements in electronic circuits (with DVM, scope,
etc)
Skills to use materials and tools of electronics industry in ordinary
servicing, installation and repair tasks (hand tools, different soldering
and de-soldering technique)
Knowledge in analysis and design of electric circuit, electronic circuit
and digital logic circuit and sensor circuit.

Page 2 of 9
 Module 1 - Hardware Design
 Skills to design small modification to basic electronics blocks
 Skills to draw developed circuit by hand
 Skill to design of Printed Circuit Board using Altium design PCB
Software
 Skill to assembling circuits and Printed Circuit Board into prototype

Module 2 - Embedded Systems Programming

 Knowledge of circuit boards, processors, chips, electronic
equipment, and computer hardware and software.
 Skills and knowledge in programming of embedded systems by
using C-language and Integrated Development Environments
(Atmel Studio 7 Compiler and AVR Dude Downloader).

Module 3 - Fault finding, Repair, and Measurement

 Troubleshooting, determining causes of operating errors and
deciding what to do about it.
 Adjust and replace defective or improperly functioning circuitry and
electronics components, using hand tools and soldering iron
 Skills to test electronics units, using standard test equipment, and
analyze results to evaluate performance and determine need for
adjustment.

Module 4 – Assembly
 Skill in assembling and utilizing mechanical parts such as DC
Motor, Fan Motor, Solenoids, bolt, nut, washer and etc.
 Skill in wiring and forming cables.
 Skill in assembling and using various types of parts and SMD part.

2.2. Theoretical Knowledge

2.2.1. Theoretical knowledge is required but not tested explicitly.
The Competitors’ Theoretical knowledge should cover:

Fundamental Electronics Principles

 Basics of AC and DC technology.
 Two ports LRC network, resistive networks with up to three
meshes.
 RC oscillators.

Components in Electronics
 Properties, behavior, characteristics and application (elementary
Page 3 of 9
 circuits) of mechanically,
 Electrically and physically adjustable components i.e. Capacitors,
Resistors, Variable Resistors ,Coils, Transformers and Diodes:
Rectifying Diodes, Switch Diodes, Zener Diodes, Capacitive
Diodes, PIN diodes Trigger components, Diac, Triac, Thyristor and
Unijunction Transistors.

Multistage and Special Amplifier Circuits

 Basic amplifier circuits (AC, DC and power amplifiers)
 Differential amplifiers/operational amplifiers
 Ideal operational amplifier: (infinite input resistance, zero output
resistance and infinite open loop gain) Basic circuits with
operational amplifier, analogue adder and sub-tractor,
differentiator, comparator, impedance transducer.
 Real operational amplifier: Offset voltage and offset current,
compensation, common mode gain and rejection, temperature drift
and frequency response.

Generators and Pulse Shaper

 Generators for sine wave voltage: RC, quartz, LC oscillators; Wien
bridge generator, phase generator.
 Pulse shaper: Schmitt trigger, differentiator, and integrator.

Digital Electronics
 Basic logic gates:
 Level switching function, function table, pulse, diagram, circuit
symbols (table in appendix)
 Properties of basic gates AND, OR, NOT, NAND, NOR,
EXCLUSIVE OR and EXCLUSIVE NOR
 Substituting basic NAND or NOR gates for basic gates.
 Creating switching functions from given circuits and vice versa.
 Making function table from circuit diagrams and switching functions
 Simplifying switching networks using Karnaugh diagram or
mathematical techniques.
 Flip-flops, RS Flip-flop, D Flip-flop and JK Master slave
Flip-flop (especially counter circuits, shift register and
frequency divider).

Page 4 of 9
 2.3. Practical Work
2.3.1. Hardware Design
Each Competitor will have to design a PCB. The Altium designer PCB
16 or 17 will be used in competition. The task board must be 100mm
x 160mm. Single layer board to be used. Soldering and fuction
design PCB.

2.3.2. Embedded Systems Programming

Programming module using ATmega 16 (Atmel Studio 7) and AVR
Dude downloader

2.3.3. Fault Finding, Repair and Measurement

The Competitors are expected to work with conventional measuring
and testing equipment to locate, test and replace faulty electronic
components on a printed circuit board, surface mount board or mixed
technology board. All surface mount components to have no more
than 20 pins. The Competitors should be able to document fault
finding method/procedure with results. 3 faults on a single board. All
test boards must have similar faults. They are further expected to
record and analyze measured results. Boards must be pre-built before
the Competition. The task board must be 100 mm x 160mm double
layer PCB.

2.3.4. Assembly
The Competitors will be asked to assemble a project from a kit of
parts. The standard to be reached is determined by IPC-A-610 issue
F (International acceptability of electronic assemblies).

3. Time allowed for each module

Time allowed
Module Suggested
(Hours)
Hardware Design 6 D1, D3
Embedded Systems Programming 3 D2
Fault Finding, Repair, and Measurement 3 D2
Assembly 4 D3

4. ASSESSMENT
This section describes how the Jury will assess the Test Project / modules. It also
specifies the assessment specifications and procedures and requirements for
marking.
4.1. Assessment Criteria
This section defines the assessment criteria and the number of objective
marks awarded. The total number of marks for all assessment criteria must

Page 5 of 9
 be 100.
Marks
Module Criterion Subjecti
Objective Total
ve
A Hardware design - 25 25
Embedded systems
B Programming - 25 25

Fault finding, repair and

C - 25 25
measurement
D Assembly - 25 25
Total 100 100

4.2. Skill Assessment Specification

Specific marking criteria for each project differ. However, major marking
features for each project are as follows.
A. Hardware design - 25 marks
Development of given basic circuit - 10 marks
Design of PCB-board layout – 8 marks
Functionality of Designed PCB – 7 marks

B. Embedded Systems Programming - 25 marks

Software functionality - 25 marks

C. Fault finding, repair and measurement - 25 marks

Finding faulty spots and evidence – 12 marks;
Repairing (IPC-A-610-F) – 3 marks;
Validity of measuring results – 8 marks;
Documentation of measuring method – 2 marks

D. Assembly - 25 marks
Operating condition – 5 marks
Component Assembly – 8 marks
Wiring quality – 6 marks
Mechanical Assembly – 6 marks

5. SKILL-SPECIFIC SAFETY REQUIREMENTS

Skill-specific safety requirements:
 All Competitors must have safety glasses and Cotton Glove

6. MATERIALS & EQUIPMENT

6.1. Infrastructure List
The Infrastructure List contents all the information regarding to equipment,
materials and facilities provided by the organizer / responsible and participant.
Page 6 of 9
Some standard components to be provided by organizer/ responsible and
participant.

Page 7 of 9
Please always visit to website for update information from jury and Download
software competition

Website : www.inaskills-electronics.com/lks2017
Email : [email protected]

Page 8 of 9
 Schedule Skill ELECTRONICS

HARI WAKTU KETERANGAN TOTAL WAKTU

C-1 14.00 – finish Familiarisasi Alat - Jam
08.00 – 08.30 Briefing / membaca soal dan pemahaman 30 menit
08.30 – 10.30 Kompetisi: Hardware Design Part 1 2 Jam
10.30 – 10.45 Break 15 Menit
10.45 – 12.45 Kompetisi: Hardware Design Part 1 2 Jam
12.45 – 13.45 Istirahat 1 Jam
C +1 13.45 – 14.15 Briefing / membaca soal dan pemahaman 30 Menit
14.15 – 15.15 Kompetisi: Fault Finding Repair and 1 jam
measurement
15.15 – 15.30 Break 15 Menit
15:30 – 17:30 Kompetisi: Fault Finding Repair and 2 jam
measurement
 Schedule Skill ELECTRONICS
HARI WAKTU KETERANGAN TOTAL WAKTU
08.00 – 08.30 Briefing / membaca soal dan pemahaman 30 menit
08.30 – 10.30 Kompetisi: Assembly 2 Jam
10.30 – 10.45 Break 15 Menit
10.45 – 12.45 Kompetisi: Assembly 2 Jam
C +2 12.45 – 13.45 Istirahat 1 Jam
13.45 – 14.15 Briefing / membaca soal dan pemahaman 30 Menit
14.15 – 15.15 Kompetisi: Embedded system Programming 1 jam
15.15 – 15.30 Break 15 Menit
15:30 – 17:30 Kompetisi: Embedded system Programming 2 jam
08.00 – 08.30 Briefing / membaca soal dan pemahaman 30 menit
C +3 08.30 – 10.30 Kompetisi: Hardware Design Part 2 2 Jam
11.30 - Selesai Discuss for the Next Competition 2018
 LOMBA KOMPETENSI SISWA
SEKOLAH MENENGAH KEJURUAN
TINGKAT NASIONAL XXV TAHUN 2017

KISI-KISI

BIDANG LOMBA
ELECTRONICS APPLICATION

3
 ASSEMBLY PROJECT

Test Project Document

LKS_2017_TP16_ASM_EN

Submitted by:
Name : Ina skills Electronics
Member : ASC WSC Team ID
Type : Open Project
Time : 4 Hours
Point : 25 Points

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 1 of 10
Contents
This Test Project proposal consists of the following documentation/files:

1. LKS_2017_TP16_ASM_EN.doc
2. LKS_2017_ TP16_ASM _01_EN.pdf
3. LKS_2017_ TP16_ASM _02_EN.pdf
4. LKS_2017_ TP16_ASM _03_EN.pdf
5. LKS_2017_ TP16_ASM _04_EN.pdf
6. LKS_2017_ TP16_ASM _05_EN.pdf
7. LKS_2017_ TP16_ASM _06_EN.pdf

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 2 of 10
 1. INSTRUCTIONS
Competitors are given 4 hours to complete an electronics assembly project. This test project
shall access competitors in the following areas:

a. Ability to assemble an electronic project based on given drawings, specifications and

instructions like :

 Schematic Diagrams
 PCB Layout Diagrams
 Assembly Photographs
 Component Part Lists
 Component Data Sheets

b. Ability to verify proper operation of an electronic project after assembly like :

 Interpret test specifications

 Demonstrate proper operation of complete project

2. DESCRIPTION PROJECT AND TASKS

This is the similar device used to watchdog the time taken to boil either half or hardboiled
egg. Music with different tempo depending on the type of boiled eggs will be heard during the
boiling process. The timing process also can be seen on the display. When the time
ended, the buzzer will sound.

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 3 of 10
 Fig 2 3D view

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 4 of 10
 Fig 2. side view

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 5 of 10
 2.4 Equipment, machinery, installations and materials required.
Proposal committee prepares the following equipment, machinery, installations and
materials.

Item Qty Material Description Notes

1 1 set All parts

2 1 Safety glass

3 1 Cotton Glove

Competitor prepares the following equipments, machinery, installations and materials.

Item Qty Material Description Notes

Universal Digital or Multi-

2 1 V, Ω, A, etc
meter
3 1 Soldering Iron

4 1 Soldering Iron Stand

5 1 Solder attractor

6 1 Pincer

7 1 Nipper

8 1 Wire Stripper

9 1 Tweezers

10 1 Precise screwdriver For trimmer resistor

11 1 Screw driver + type

12 1 Screw driver - type

13 1 Brush

14 Ect…

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 6 of 10
Part List PCB Main Assembly Project
No No. Part Value Qty. Note
.
1. R1 0,47 Ω 1 Resistor 2 W
2. R2, R3 470 Ω 2 Resistor Smd 1206
3. R4, R5, R8, R9, 1 KΩ 4 Resistor ¼ W
4. R11 1 KΩ 1 Resistor Smd 1206
5. R6, R7 10 KΩ 2 Resistor Smd 1206
6. R16, R20, R21, R18 10 KΩ 4 Resistor Smd 0805
7. R10 330 Ω 1 Resistor Smd 0805
8. R12, R14 330 Ω 2 Resistor Smd 1206
9. R56 330 Ω 1 Resistor ¼ W
10. R13 470 Ω 1 Resistor Smd 1206
11. R15 56 KΩ 1 Resistor ¼ W
12. R17 27 KΩ 1 Resistor ¼ W
13. R19 6Ω8 1 Resistor ¼ W
14. R22 220 Ω 1 Resistor ¼ W
15. R23 180 KΩ 1 Resistor ¼ W
16. R24, R25, R26, R27, R32, R33, 100 KΩ 16 Resistor ¼ W
R34, R35, R40, R41, R42, R43,
R48, R49, R50, R51
17. R28, R29, R30, R31, R36, R37, 10 KΩ 16 Resistor ¼ W
R38, R39, R44, R45, R46, R47,
R52, R53, R54, R55
18. VR1 2 KΩ 1 Multiturn / Variabel
Resistor
19. VR2 5 KΩ 1 Multiturn / Variabel
Resistor
20. C1, C4, C8, C10, C11, C15, 100 nF 7 Cap. SMD 0805
C16
21. C2 100 uF 1 Cap. Alumunium
22. C3, C14 4,7 uF 2 Cap. Alumunium
23. C5 10 uF 1 Cap. Alumunium
24. C6 0,47 uF 1 Cap. Alumunium
25. C7 1 uF 1 Cap. Alumunium
26. C9, C12 22 pF 2 Cap. SMD 0805
27. C13 68 pF 1 Cap. Ceramic
28. D1 Led Red 1 Led Red SMD
29. D2 3V 1 Zener 3 V
30. Q1, H1061 1 TR Darlington

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 7 of 10
31. Q2, Q3, Q7 2N3904 3 TR PNP, Dip
32. Q4, Q5, Q6 C1815 3 TR NPN, Dip
33. Q8, Q9, Q10, Q11, Q12, Q13, BC 857 16 TR PNP, SMD
Q14, Q15, Q16, Q17, Q18, Q19,
Q20, Q21, Q22, Q23
34. S1 4 Pin 5 mm 1 Push Buttom 4 Pin
35. X1 12 MHz 1
36. U1 Atmega 16 1 IC Programing
37. U2 CD4066 1 IC DIP
38. U3 MU3482 1 IC DIP
39. U4, U5 Sn 74Ls138 2 IC SMD
40. P1, P2, P4, P5 2 Pin 5 mm 4 Terminal Block 2 Pin
41. P3 Header 1x6 Pin 1 Pin Header Single
42. P6 3 Pin 5 mm 1 Terminal Block 3 Pin
43. P7 Header 2x2 Pin 1 Pin Header Double
44. P8, P9 Header IDC 2 Pin Header IDC 2x5 (10
2x5 Pin)
45. LS1 Buzzer 5 V 1 Buzzer 5 Volt
46. Soket IC U2 14 Pin 1 Soket IC 14 Pin
47. Soket IC U3 16 Pin 1 Soket IC 14 Pin
48. Soket IC U1 40 Pin 1 Soket IC 14 Pin
49. Jumper Mini 2 Pin 2 Pin 1 Jumper 2 PIN
50. PCB Main 16 x 20 CM 1 PCB Main Double Layer

Part List PCB Panel Assembly Project

No. No. Part Value Qty. Note
1. D1, D2, D3, D4, D5, D6, D7, Led Green 5 64 Led Green 5mm
D8, D9, D10, D11, D12, D13, mm
D14, D15, D16,D17, D18, D19,
D20, D21, D22, D23, D24,D25,
D26, D27, D28, D29, D30, D31,
D32, D33, D34, D35, D36, D37,
D38, D39, D40, D41, D42, D43,
D44, D45, D46, D47, D48, D49,
D50, D51, D52, D53, D54, D55,
D56, D57, D58, D59, D60, D61,
D62, D63, D64,
2. D65 Led Blue 5 mm 1 Led Blue 5 mm
3. P1, P2 Header IDC 2 Header IDC 2X5 (10 Pin)
2X5
4. PCB Panel 16 x 20 CM 1 PCB Panel Double Layer

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 8 of 10
Part list Assembly Project
No. Name Part Value Qty. Note
1. Swith SPDT 3 PIN 1
2. Swith SPST 2 PIN 1
3. Push Buttom 2 PIN 1
4. Speaker 8Ω 0,1W 2 PIN 1
5. Spicer Hexagonal Female- 0,8 CM 4
Female
6. Spicer Hexagonal Female-Male 4 Cm 4
7. Spicer Hexagonal Female-Male 0.5 Cm 4
116x170x76 1
8 Acrylic
mm
9 Cable yellow 0.6mm 50cm
10 Cable red 0.6mm 50cm
11 Cable black 0.6mm 50cm
12 Cable blue 0.6mm 50cm
Diameter 0.6
13 timah
mm
Diameter 0.6
14 timah
mm

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 9 of 10
 SELAMAT BERLATIH !!!
Akan dilakukan revisi kisi kisi:
Tolong Selalu Kunjungi : www.inaskills-electronics.com

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 10 of 10
 DAFTAR KEBUTUHAN ALAT
LOMBA KOMPETENSI SISWA (LKS) SMK XXV TAHUN 2017

Bidang Lomba : ELECTRONICS

HARGA JUMLAH Keterangan

NO. NAMA ALAT SPESIFIKASI QTY SATUAN KETERANGAN
SATUAN HARGA Beli Sewa Pinjam
Osciloscope dual trace
1 Atten 60Mhz 2 Unit Cadangan peserta
lengkap
2 Multimeter Analog Sanwa YX-360D 2 Unit Cadangan peserta
3 Multimeter Digital Sanwa CD-800a 2 Unit Cadangan peserta
4 Bor tangan Hitachi 0.5-10mm 2 Unit Utk Workshop
5 Bor duduk Hitachi 0.5-10mm 2 Unit Utk Workshop
6 Setrika standard 1 unit Utk Workshop
Soldering Station, FX-951,
7 Solder Hakko 35 unit Peserta
www.master-laptop.com
8 Attractor Dekko/good 35 pcs peserta
9 Tang potong YN-04 Goot 35 pcs peserta
10 Tang banding PS-40 sanfix 35 pcs peserta
11 CNC PCB LPKF LPKF 1 pcs Sewa
12 Meja Kerja ESD 36 pcs Utuk peserta

Total Harga Alat untuk Lomba Rp -

Kebutuhan Juri
13 HP Laserjet Pro Color Printer Laserjet Color Printer 1 Bh
14 Infocus + Layar standart 1 bh
15 Jam Digital and Timer Down > 500mm x 200mm 2 bh
16 Laptop intel Core i5, RAM 5 Unit
4Gb, Hd 250Gb, VGA Card
 DAFTAR KEBUTUHAN ALAT PESERTA YANG WAJIB DI BAWA
LOMBA KOMPETENSI SISWA (LKS) SMK XXV TAHUN 2017

Bidang Lomba : ELECTRONICS

NO. NAMA ALAT SPESIFIKASI QTY SATUAN KETERANGAN

1 Osciloscope dual trace lengkap min freq 20Mhz 1 Unit Yang Wajib Di Bawa Peserta
minimal i core, Ram 2Gb
2 Laptop (instal Atmel Studio 7 dan 1 unit Yang Wajib Di Bawa Peserta
Altium 16)
3 Multi tester Analog/Digital 1 Unit Yang Wajib Di Bawa Peserta
4 Solder bebas 1 pcs Yang Wajib Di Bawa Peserta
5 Dudukan solder Standard 1 pcs Yang Wajib Di Bawa Peserta
6 Tang buaya Standard 1 pcs Yang Wajib Di Bawa Peserta
7 Penggaris Standard 30 cm 1 pcs Yang Wajib Di Bawa Peserta
8 Protoboard Standard 1 pcs Yang Wajib Di Bawa Peserta
9 Pembersih Mata Solder/ Sponge Standard 1 pcs Yang Wajib Di Bawa Peserta
 DAFTAR KEBUTUHAN BAHAN
LOMBA KOMPETENSI SISWA (LKS) SMK XXV TAHUN 2017

Bidang Lomba : ELECTRONICS

HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
ASSEMBLY PROJECT
1 R1 0,47 Ω 1 Pcs Resistor 2 W
2 R2, R3 470 Ω 2 Pcs Resistor Smd 1206
3 R4, R5, R8, R9, 1 KΩ 4 Pcs Resistor ¼ W
4 R11 1 KΩ 1 Pcs Resistor Smd 1206
5 R6, R7 10 KΩ 2 Pcs Resistor Smd 1206
6 R16, R20, R21, R18 10 KΩ 4 Pcs Resistor Smd 0805
7 R10 330 Ω 1 Pcs Resistor Smd 0805
8 R12, R14 330 Ω 2 Pcs Resistor Smd 1206
9 R56 330 Ω 1 Pcs Resistor ¼ W
10 R13 470 Ω 1 Pcs Resistor Smd 1206
11 R15 56 KΩ 1 Pcs Resistor ¼ W
12 R17 27 KΩ 1 Pcs Resistor ¼ W
13 R19 6Ω8 1 Pcs Resistor ¼ W
14 R22 220 Ω 1 Pcs Resistor ¼ W
15 R23 180 KΩ 1 Pcs Resistor ¼ W
R24, R25, R26, R27, R32, R33,
16 R34, R35, R40, R41, R42, R43, 100 KΩ 16 Pcs Resistor ¼ W
R48, R49, R50, R51
R28, R29, R30, R31, R36, R37,
17 R38, R39, R44, R45, R46, R47, 10 KΩ 16 Pcs Resistor ¼ W
R52, R53, R54, R55
Multiturn / Variabel
18 VR1 2 KΩ 1 Pcs
Resistor
Multiturn / Variabel
19 VR2 5 KΩ 1 Pcs
Resistor
C1, C4, C8, C10, C11, C15,
20 100 nF 7 Pcs Cap. SMD 0805
C16
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
21 C2 100 uF 1 Pcs Cap. Alumunium
22 C3, C14 4,7 uF 2 Pcs Cap. Alumunium
23 C5 10 uF 1 Pcs Cap. Alumunium
24 C6 0,47 uF 1 Pcs Cap. Alumunium
25 C7 1 uF 1 Pcs Cap. Alumunium
26 C9, C12 22 pF 2 Pcs Cap. SMD 0805
27 C13 68 pF 1 Pcs Cap. Ceramic
28 D1 Led Red 1 Pcs Led Red SMD
29 D2 3V 1 Pcs Zener 3 V
30 Q1, H1061 1 Pcs TR Darlington
31 Q2, Q3, Q7 2N3904 3 Pcs TR PNP, Dip
32 Q4, Q5, Q6 C1815 3 Pcs TR NPN, Dip
Q8, Q9, Q10, Q11, Q12, Q13,
33 Q14, Q15, Q16, Q17, Q18, Q19, BC 857 16 Pcs TR PNP, SMD
Q20, Q21, Q22, Q23
34 S1 4 Pin 5 mm 1 Pcs Push Buttom 4 Pin
35 X1 12 MHz 1 Pcs
36 U1 Atmega 16 1 Pcs IC Programing
37 U2 CD4066 1 Pcs IC DIP
38 U3 MU3482 1 Pcs IC DIP
39 U4, U5 Sn 74Ls138 2 Pcs IC SMD
40 P1, P2, P4, P5 2 Pin 5 mm 4 Pcs Terminal Block 2 Pin
41 P3 Header 1x6 Pin 1 Pcs Pin Header Single
42 P6 3 Pin 5 mm 1 Pcs Terminal Block 3 Pin
43 P7 Header 2x2 Pin 1 Pcs Pin Header Double
Pin Header IDC 2x5 (10
44 P8, P9 Header IDC 2x5 2 Pcs
Pin)
45 LS1 Buzzer 5 V 1 Pcs Buzzer 5 Volt
46 Soket IC U2 14 Pin 1 Pcs Soket IC 14 Pin
47 Soket IC U3 16 Pin 1 Pcs Soket IC 14 Pin
48 Soket IC U1 40 Pin 1 Pcs Soket IC 14 Pin
49 Jumper Mini 2 Pin 2 Pin 1 Pcs Jumper 2 PIN
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
PCB Main Double
50 PCB Main Assembly 10x16 cm Design sesuai soal 1 Pcs
Layer
D1, D2, D3, D4, D5, D6, D7,
D8, D9, D10, D11, D12, D13,
D14, D15, D16,D17, D18, D19,
D20, D21, D22, D23, D24,D25,
D26, D27, D28, D29, D30, D31,
51 D32, D33, D34, D35, D36, D37, Led Green 5 mm 64 Pcs Led Green 5mm
D38, D39, D40, D41, D42, D43,
D44, D45, D46, D47, D48, D49,
D50, D51, D52, D53, D54, D55,
D56, D57, D58, D59, D60, D61,
D62, D63, D64,
52 D65 Led Blue 5 mm 1 pcs Led Blue 5 mm
Header IDC 2X5 (10
53 P1, P2 Header IDC 2X5 2 pcs
Pin)
PCB Panel Double
54 PCB Panel Assembly 10x16 Cm Design sesuai soal 1 pcs
Layer
55 Swith SPDT 3 PIN 1 pcs Swith
56 Swith SPST 2 PIN 1 pcs Swith
57 Push Buttom 2 PIN 1 pcs Swith
58 Speaker 8Ω 0,1W 2 PIN 1 pcs Speaker
Spicer Hexagonal Female-
59 0,8 CM 4 pcs Spicer
Female
60 Spicer Hexagonal Female-Male 4,5 Cm 4 pcs Spicer
61 Spicer Hexagonal Female-Male 0.5 Cm 4 pcs Spicer
62 Wire AWG 22 Blue 1 meter Wire
63 Wire AWG 22 Red 1 meter Wire
64 Wire AWG 22 Yellow 1 meter Wire
65 Wire AWG 22 Black 1 meter Wire
66 Wire 10 Layer Gray 0,5 meter Wire
67 Soket IDC 2x5 10 Pin IDC 2x5 2 pcs Soket
68 Box Acrilic Assembly design sesuai soal 1 pcs
69 Timah 0.8 mm 2 meter
70 Timah 0.6 mm 2 meter
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
71 packing dan list komponen 1
72 Power Supplay 12 Volt - 2 Amper 1
Total Harga Per unit Assembly Harga Per Unit

SOFTWARE DESIGN
Accelerometer
1 S1 GY-61 3-Axis ±3g 1 pcs ADXL335 module
Dot-matrix 8x8 red, 6
2 DM1 Dot-matrix 8x8 red 1 pcs cm
3 D1, D2, D3, D4 LED 3mm 4 pcs LED 3mm
4 R5, R6, R7, R8 470 Ohm 4 pcs Dip ¼ Watt
R1, R2, R3, R4, R9, R10, R11,
5 R12
100 Ohm 8 pcs Dip ¼ Watt
6 R13, R14, R15, R16 10K Ohm 4 pcs Dip ¼ Watt
7 VR1 5K 1 pcs Single turn
8 SW1, SW2, SW3, SW4 tactile switch 4 pcs 4.5x4.5 mm
9 J2, J3, J4, J5, J6 Test Point 5 pcs Test Point
10 Header 1x5 male 1 pcs 1x5 male
11 Header 1x5 female 1 pcs 1x5 female
12 Euro Card DIN 41612 09 73 264 2804 1 pcs 09 73 264 2804
13 Spacer Plastik 10mm x 5 mm 2 pcs 10mm x 5 mm
14 Spacer Kuningan 10mm x 5 mm 4 pcs 10mm x 5 mm
15 R1 1K Ohm, 1 pcs SMD 0805
16 R2 1K2 Ohm, 1 pcs SMD 0805
17 R3, R4 68 Ohm, 2 pcs SMD 0805
18 R6 10K Ohm, 1 pcs SMD 0805
19 R5 470 Ohm, 1 pcs SMD 0805
20 R7, R8 1K Ohm, 2 pcs SMD 0805
21 C1, C4, C10, C13 100nF, 4 pcs SMD 0805
22 C2, C7, C5, C4 100 uF/ 25 V 4 pcs Cap. Electrolit
23 C8, C9 22 pF, 2 pcs SMD 0805
24 L1 100uH, 1 pcs SMD 0805
25 D1, D4 IN4001 2 pcs Dioda 1 Ampere
26 D5, D6 3,3 V 2 pcs Zener 3,3V
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
27 U2 ATmega 8, 1 pcs QFP 32A SMD
28 U3 Atmega 16, 1 pcs IC Programing
29 U1 LM7805 1 pcs Ic Regulator
30 X1 12 Mhz 1 pcs Cristall
31 X2 11.059200 MHz 1 pcs Cristall
32 D2, D3, D7, D8, D9 LED red 5 pcs SMD 0603
Header male 1x6 PIN,
33 J1 Header 1 pcs Type L
Header male 1x3 PIN,
34 P2, P3 Header 2 pcs Type I
Header male 1x8 PIN,
35 P5, P6, P7, P8 Header 4 pcs Type I
Header female 1x8 PIN,
36 P5, P6, P7, P8 Header 4 pcs Type I
37 Jumper 2 pin Jumper 2 pin 2 Jumper 2 pin
38 J2 USB Type B 1 USB Type B
39 S1 tactile switch, 1 4.5x4.5 mm
DIN41612 - HDR2X32
40 Euro Card DIN 41612 DIN 41612 1 pcs GW - FEMALE
41 Spacer Kuningan 10x5 mm 4 pcs Spiser
42 Kable USB Kabel Printer 1 pcs Kable Printer tipe B
43 PCB Taks 12,5x10 cm Design sesuai soal 1 pcs
44 PCB AVR Card 10x10 Cm Design sesuai soal 1 pcs
45 Timah 0,8 mm 1 meter
Soldering, Assembly dan
46 1
Programing test
Total harga Per Unit Software Design Harga Per Unit

HARDWARE DESIGN
1 Resistor ¼ W 1% 6,8 Ohm 1 pcs Resistor ¼ W 1%
2 Resistor ¼ W 1% 220 Ohm 11 pcs Resistor ¼ W 1%
3 Resistor ¼ W 1% 330 Ohm 7 pcs Resistor ¼ W 1%
4 Resistor ¼ W 1% 1K Ohm 12 pcs Resistor ¼ W 1%
5 Resistor ¼ W 1% 10K Ohm 1 pcs Resistor ¼ W 1%
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
6 Resistor ¼ W 1% 12K Ohm 1 pcs Resistor ¼ W 1%
7 Resistor ¼ W 1% 15K Ohm 1 pcs Resistor ¼ W 1%
8 Resistor ¼ W 1% 18K Ohm 1 pcs Resistor ¼ W 1%
9 Resistor ¼ W 1% 20K Ohm 2 pcs Resistor ¼ W 1%
10 Capasitor MKM 100 nF 11 pcs Capasitor MKM
11 Capasitor Electrolit 4,7 uF 1 pcs Capasitor Electrolit
12 Capasitor Electrolit 6,8 uF 1 pcs Capasitor Electrolit
13 Capasitor Electrolit 10 uF 1 pcs Capasitor Electrolit
14 Capasitor Electrolit 100 uF 1 pcs Capasitor Electrolit
15 Dioda 1 Ampere 1N4007 1 pcs Dioda 1 Ampere
16 Transistor NPN Tr. C9013 1 pcs Transistor NPN
17 Transistor PNP Tr. TIP 42C 1 pcs Transistor PNP
18 Led Red 3mm Led. Red 3mm 10 pcs Led Red 3mm
19 Led Green 3mm Led. Green 3mm 1 pcs Led Green 3mm
Seven Segment CA
20 Seven Segment CA 0,56” Ds. 7 Seg. 41056 1 pcs
0,56”
21 IC Pulse Generator Ic. Ne 555 1 pcs IC Pulse Generator
22 IC Gate Not Ic. SN 74LS04 1 pcs IC Gate Not
23 IC Gate And Ic. SN 74LS08 2 pcs IC Gate And
IC Logic Decoder
24 IC Logic Decoder Demux Ic. SN 74LS42 1 pcs
Demux
IC Logic Decoder
25 IC Logic Decoder BCD Ic. SN 74LS47 1 pcs
BCD
26 IC Logic Encoder Ic. SN 74LS147 1 pcs IC Logic Encoder
27 IC Regulator 5 V Ic. L 7805 1 pcs IC Regulator 5 V
28 IC Op-Amp Ic. LM 324 3 pcs IC Op-Amp
29 IC Temperatur Sensor Ic. LM 35 1 pcs IC Temperatur Sensor
30 Soket IC Soket IC 16 Pin 3 pcs Soket IC
31 Soket IC Soket IC 14 Pin 6 pcs Soket IC
32 Soket IC Soket IC 8 Pin 1 pcs Soket IC
33 Buzzer 5 V Buzzer 5 V 1 pcs Buzzer 5 V
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
34 Fan 12V 8x8cm Fan 12Vdc 1 pcs Fan 12V 8x8cm
35 Soket Molek Soket Molek 2 Pin 1 pcs Soket Molek
36 Header Molek Header Molek 2 Pin 1 pcs Header Molek
37 Terminal Block Terminal Block 2 Pin 2 pcs Terminal Block
38 Wire Red Awg 22 Wire Red Awg 22 0,2 Meter Wire Red Awg 22
39 Wire Black Awg 22 Wire Black Awg 22 0,2 Meter Wire Black Awg 22
40 Lead 0,8 mm Lead 0,8 mm 1,5 Meter Lead 0,8 mm
41 Spiser 1 Cm Hexagonal Spiser 1 Cm Hexagonal 4 Pcs Spiser
42 PCB 16x10 cm Plan PCB 16x10 Cm Plan 1 Pcs PCB 16x10 cm Plan
43 PCB 16x10 cm Finished 1 Pcs design sesuai soal
44 Packing dan list komponen 1
Total Harga Per Unit Hardware Design Harga Per Unit

FAULT FINDING
1 R1 1,8 Ω 1 pcs Resistor ¼ W 1%
2 R2 390 KΩ 1 pcs Resistor ¼ W 1%
3 R3 150 KΩ 1 pcs Resistor ¼ W 1%
4 R4, R11 10 KΩ 2 pcs Resistor ¼ W 1%
5 R6 120 KΩ 1 pcs Resistor ¼ W 1%
R7, R9, R14, R15, R22, R26,
6 12 KΩ 7 pcs Resistor ¼ W 1%
R27
7 R8 47 KΩ 1 pcs Resistor ¼ W 1%
8 R10 82 KΩ 1 pcs Resistor ¼ W 1%
9 R12 39 KΩ 1 pcs Resistor ¼ W 1%
10 R13, R17, R18, R19, R20 1 KΩ 5 pcs Resistor ¼ W 1%
11 R16 68 KΩ 1 pcs Resistor ¼ W 1%
12 R21 6,8 KΩ 1 pcs Resistor ¼ W 1%
13 R23, R24 330 KΩ 2 pcs Resistor ¼ W 1%
14 R25, R30 4,7 KΩ 2 pcs Resistor ¼ W 1%
15 R28 560 KΩ 1 pcs Resistor ¼ W 1%
16 R29 1,5 KΩ 1 pcs Resistor ¼ W 1%
Multiturn / Variabel
17 R5 5 KΩ 1 pcs
Resistor
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
C1, C3, C4, C5, C6, C7, C8, C9,
18 C10, C13, C15, C16, C17, C18, 100 nF 20 pcs Cap. MKM
C19, C20, C21, C26, C28, C30
19 C2 150 pF 1 pcs Cap. Ceramic
20 C11 330 nF 1 pcs Cap. MKM
21 C12 680 pF 1 pcs Cap. Ceramic
22 C14 2,2 uF 1 pcs Cap. Tantalum
23 C22 68 pF 1 pcs Cap. Ceramic
24 C23, C32 1 nF 2 pcs Cap. MKM
25 C24 220 pF 1 pcs Cap. Ceramic
26 C25 4,7 nF 1 pcs Cap. MKM
27 C27, C29 47 uF 2 pcs Cap. Electrolit
28 C31 22 nF 1 pcs Cap. MKM
29 U1, L 7805 1 pcs IC Regulator
30 U2, U6, U8 HD 74HC86N 3 pcs IC Logic Gate
31 U3, U13 SN 74HC08N 2 pcs IC Logic Gate
32 U4, SN 74HC32N 1 pcs IC Logic Gate
33 U5, 74HC4040 1 pcs IC Binary Counter 12
34 U7, U9 NE555 2 pcs IC Timer
35 U10 SN 74LS93 1 pcs IC Counter
36 U11, U14 74HC4075 2 pcs IC Logic Gate
37 U12 SN 74HC04 1 pcs IC Logic Gate
38 U15 74HC4060 1 pcs IC SMD
39 U16, U17 TLV2372 2 pcs IC Op Amp
40 D1 Led Red 3mm 1 pcs Led Red
41 D2, D3, D4, D5 Led Green 3mm 4 pcs Led Red
42 S1 PB 2 Pin 1 pcs Push Buttom
43 P1 T-Block 2 Pin 1 pcs Terminal Block 3 Pin
44 P2 Header Molek 1 pcs Header Molek 2 Pin
45 P2` Soket Molek 2 pcs Soket Molek 2 Pin
46 U1` Headsink L7805 1 pcs Headsink Almunium
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
U2`, U3`, U4`, U7`, U8`, U10`,
47 14 Pin 11 pcs Soket IC 14 Pin
U11`, U12`, U13`, U14`, U15`
48 U5` 16 Pin 1 pcs Soket IC 16 Pin
49 U6`, U9`, U16`, U17` 8 Pin 4 pcs Soket IC 8 Pin
50 Spiser Hexagonal 1 Cm 4 pcs Spiser
51 Wire AWG22 Red 20 Cm 1 pcs Wire
52 Wire AWG22 Black 20 Cm 1 pcs Wire
53 Wire 2 Layer 20 Cm 1 pcs Wire
54 Timah 0,8 mm 0,8 mm 2 pcs Wire
55 PCB Fault Finding 16x10 Cm design sesuai soal 1 pcs PCB Double Layer
56 Soldering dan Assembly 1
Total Harga Per Unit Fault Finding Harga Per Unit
57 Mata bor 0.8 mm Hitachi 30 pcs
58 Mata bor 1.0 mm Hitachi 30 pcs
59 Mata bor 1.5 mm Hitachi 10 pcs
60 Mata bor 3.0 mm 5 pcs
61 Hcl zat kimia 2 ltr
62 H2O2 zat Kimia 2 ltr
63 Pcb Polos ukuran 10 x 20 cm 30 pcs
64 Autan/ anti nyamuk Zat Aktif yg 15 % 1 botol
65 Heat Toner Paper a4 Transper Pcb Peper 1 rim
66 Pinset good 35 pcs
67 Obeng (+) (-) set Sanfix 35 pcs
68 Obeng trim (-) Standard 35 pcs
69 Mistar besi / Penggaris Besi Standard 30 cm 35 pcs
70 Cutter Drupal 600 35 pcs
71 Kaca Pembesar Standard diameter 10 cm 2 pcs
72 Protoboard double side 2 pcs
Pembersih Mata Solder/
73 Standard 5 pcs
Sponge
74 Kacamata solder Bening kualitas bagus 34 pcs
 HARGA JUMLAH KETERANGAN
NO NAMA BAHAN SPESIFIKASI KHUSUS QTY SATUAN KETERANGAN
SATUAN HARGA BELI SEWA PINJAM
Standard ESD / tipis standar
75 Sarung tangan 34 pcs
manufactur electronics

76 Masker untuk menyolder Standard 34 pcs

Total Harga Untuk 1 peserta Rp -

Total Peserta 34 peserta

Rp -
Cadangan 4 peserta

Total Harga seluruhnya

 DAFTAR KEBUTUHAN PENUNJANG
LOMBA KOMPETENSI SISWA (LKS) SMK XXV TAHUN 2017

BIDANG LOMBA : ELECTRONICS

KETERANGAN KEPERLUAN UNTUK

NO NAMA BAHAN SPESIFIKASI KHUSUS JUMLAH SATUAN HARGA SATUAN JUMLAH HARGA
BELI SEWA PINJAM JURI
A. Peralatan Juri
1 Banner promosi skills X baner 4 bh promosi skills
2 Bendera meja merah putih mini 34 pcs
3 Spanduk Promosi 5 M x 1,5 M 1 pcs promosi skills
locker tas Locker Alba LC – 505, 5 pintu (5x1) 7 pcs
4
Miyako WDP-300 Dispenser Air
Dispenser 1 pcs
5 Galon Bawah
Kabel Roll Stop Kontak Wellto 10
Kebel Roll 10 pcs
6 mtr + saklar
7 Pengeras Suara Sewa

TOTAL HARGA Rp -
 DAFTAR KEBUTUHAN PERLENGKAPAN JURI
LOMBA KOMPETENSI SISWA (LKS) SMK XXV TAHUN 2017

BIDANG LOMBA : ELECTRONICS

KETERANGAN KEPERLUAN UNTUK

NO URAIAN SPESIFIKASI JUMLAH SATUAN HARGA SATUAN JUMLAH HARGA
BELI SEWA PINJAM JURI
A. Peralatan Juri
1 Cartridge Warna Laserjet 1 Bh Utk 3 Juri dan print revisi soal
2 Cartridge Hitam Laserjet 1 Bh Utk 3 Juri dan print revisisoal
3 whiteboard standart 1 Bh Utk Juri dan Peserta
4 Flasdisk 8 Gb 34 pcs Utk Copy Data Juri
5 kalkulator standart 3 Bh Untuk Schoring Juri
6 Cutter standart 3 Bh Setiap Juri
7 Gunting standart 3 Bh Setiap Juri
8 Steples standart 2 Bh Utk 3 Juri
9 kaca pembesar standart 3 Bh Setiap Juri
10 Data bag ( dr plastik) standart 34 Bh Utuk simpan hasil kerja
11 Lem kertas standart 1 Bh Utuk 3 juri
12 Solasi standart 1 Bh Utk 3 Juri
13 Gantungan kunci Label standart 12 bh untuk label

B. ATK/Bahan Juri
1 Boltpoint standart 1 Lusin Utk 3 Juri
2 pensil standart 3 Bh Utk 3 Juri
3 penghapus standart 3 Bh Utk 3 Juri
4 penggaris standart 3 Bh Utk 3 Juri
5 buku catatan standart 3 Bh Utk 3 Juri
6 Kertas HVS standart 5 Rim Utk 3 Juri
7 Spidol permanent standart 3 Bh Utk 3 Juri
8 Spidol white bord standart 3 Bh Utk 3 Juri
9 Stopmap standart 10 Bh Utk 3 Juri
10 Amplop besar standart 30 Bh Utk 3 Juri
11 Tip-ex standart 3 Bh Utk 3 Juri
12 Rautan Pensil standart 3 Bh Utk 3 Juri

TOTAL HARGA Rp -
 Objective Marking Form Electronics Trade
LOMBA KOMPETENSI SISWA (LKS) SMK 2017

Score Competitor
No Criterion Description Add - (Extra Aspect Information)
Max 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A HARDWARE DESIGN
Development of given basic circuit 10,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Design rangkaian A 0 jika tidak sesuai 2,00
Nilai R1 0 jika tidak sesuai 1,00
Nilai R2 0 jika tidak sesuai 1,00
Nilai C1 0 jika tidak sesuai 1,00
perhitungan/ formula/ rumus 0 jika tidak sesuai 1,00
Design rangkaian C 0 jika tidak sesuai 2,00
Design rangkaian D 1 jika tidak sesuai 2,00
Design of PCB-board layout 8,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
0 jika tidak sesuai dengan standard
Lebar Pad sesuai dengan Intruksi 1,00
Instruksi
0 jika tidak sesuai dengan standard
Lebar jalur sesuai dengan Intruksi 1,00
Instruksi
minus 1 per jumper jika tidak horizontal
0,50
Jumper atau vertikal

Tidak ada Jumper dibawah komponen 0 jika ada jumper dibawah komponen 0,50

0 jika ukuran tidak sesuai dengan lembar

1,00
Ukuran PCB kerja

Tatal etak sesuai dengan tata letak instruksi 1,00

Standard layout (90°, 45 °) / standard pada

minus 1 per jalur yang tidak sesuai 1,00
percabangan
Tidak ada net yang terputus/ Jalur tersambung
0 jika ada jalur yang putus akibar layout 2,00
semua/ finish
Functionality of Designed PCB 7,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Tidak ada perubahan jalur 0 jika ada perubahan jalur 1,00
Fungsi rangkaian A 0 jika tidak fungsi 1,00
Fungsi rangkaian B Output clock berfungsi 1,00
Fungsi Display seven segment down 2,00
Fungsi Display LED down 2,00
25,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
B ASSEMBLY
Component Assembly 8,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Soldering (timah cukup, matang dan bentuk
minus 0.25 soldering yang tidak sesuai 2,00
soldering)
Tidak ada jalur / pad yang terangkat/ terbakar 0 jika ada jalur terbakar 1,00

0 jika > dari 3 komponen yang tidak di

pembengkokan kaki komponen/ Banding
tekuk/ banding pada PCB sesuai dengan 1,00
Komponen
standard IPC-A-610-F
Pemotongan kaki komponen minus 0.0,25 jika tidak lebih dari 2.5 mm 1,00

Penempatan Komponen (Resistor DIP, resistor 0 jika > dari 3 komponen yang tidak
SMD soket IC, Switch button, Connector T-Block, menempel pada PCB sesuai dengan 1,00
Capasitor SMD) menempel pada papan PCB standard IPC-A-610-F
minus 1 per komponen yang tinggi tidak
Tinggi Transistor DIP 0,50
sesuai standard IPC-A-610-F
0 jika salah pemasangan komponen
Salah pemasangan komponen (terbalik, salah nilai komponen, salah 0,50
komponen)
Tidak ada sisa fluk soldering /bersih 0 jika tidak bersih 1,00
Wiring quality 6,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Panjang kabel power DC 1,00
Panjang kabel switch ON OFF 1,00
Panjang kabel Switch Timer 1,00
Panjang kabel Switch Start 1,00
Panjang kabel speaker 1,00
Panjang kabel ribbon / panel PCB to main PCB (A) 0,50
Panjang kabel ribbon / panel PCB to main PCB (B) 0,50
Mechanical Assembly 6,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
 Score Competitor
No Criterion Description Add - (Extra Aspect Information)
Max 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Spacer main PCB to Acrylic 1,00
Spacer main PCB to panel 1,00
Spacer panel PCB to Cover 2,00
Penutup Box 1,00
Screw terpasang kuat 1,00
Operating condition 5,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Fungsi PCB Main 1,50
Fungsi PCB Panel 1,50
Fungsi Keseluruhan 2,00
25,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
C Embedded Systems Programming
Taks 1 (Running Text)
all display OFF setelah direstart 0 jika tidak sesuai dengan isntruksi 0,50
Fungsi SW1 1 jika tidak sesuai dengan isntruksi 1,00
Tampilan display running text 0 jika tidak sesuai dengan isntruksi 2,00
waktu pergeseran 1 jika tidak sesuai dengan isntruksi 0,50
tampilan tidak berbayang atau kedip 0 jika berbayang atau kedip 1,00
Kondisi LED 0 jika tidak sesuai dengan isntruksi 0,50
Kondisi SW 2, SW3, SW4 0 jika tidak sesuai dengan isntruksi 0,50
Taks 2 (ADC)
all display OFF setelah direstart 0 jika tidak sesuai dengan isntruksi 0,50
Fungsi SW2 1 jika tidak sesuai dengan isntruksi 1,00
Format tulisan display 0 jika tidak sesuai dengan isntruksi 2,00
Nilai Maximum dan Minimum Display 1 jika tidak sesuai dengan isntruksi 1,00
Kondisi LED 0 jika tidak sesuai dengan isntruksi 0,50
Tampilan tidak berbayang atau kedip 0 jika berbayang atau kedip 1,00
Kondisi SW 2, SW3, SW4 0 jika tidak sesuai dengan isntruksi 0,50
Taks 3 (Logo)
All display OFF setelah direstart 0 jika tidak sesuai dengan isntruksi 0,50
Fungsi SW3 1 jika tidak sesuai dengan isntruksi 1,00
Format Display 0 derajad 0 jika tidak 1,00
Format Display 90 derajad 0 jika tidak sesuai dengan instruksi 1,00
Format Display 180 derajad 0 jika tidak sesuai dengan isntruksi 1,00
Format Display 270 derajad 0 jika tidak sesuai dengan isntruksi 1,00
Kondisi LED 0 jika tidak sesuai dengan isntruksi 0,50
Tampilan tidak berbayang atau kedip 0 jika berbayang atau kedip 0,50
Kondisi SW 2, SW3, SW4 0 jika tidak sesuai dengan isntruksi 0,50
Taks 4 (counter)
All display OFF setelah direstart 0 jika tidak sesuai dengan isntruksi 0,50
Fungsi SW4 0 jika tidak 1,00
Format tulisan display 0 jika tidak sesuai dengan isntruksi 0,50
Nilai Maximum dan Minimum Display 1 jika tidak sesuai dengan isntruksi 1,00
Kondisi LED 0 jika tidak sesuai dengan isntruksi 1,00
Tampilan tidak berbayang atau kedip 0 jika berbayang atau kedip 1,00
Kondisi SW 2, SW3, SW4 0 jika tidak sesuai dengan isntruksi 0,50
25,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0
D Fault finding, repair and measurement
Finding faulty spots and evidence 12,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
Find faulty component Identification - 1.5 1,50
Find faulty component Fault Symbol - 1 1,00
Describe valid evidence per fault -0.5 0,50
Find faulty component Identification - 1.5 1,50
Find faulty component Fault Symbol - 1 1,00
Describe valid evidence per fault -0.5 0,50
Find faulty component Identification - 1.5 1,50
Find faulty component Fault Symbol - 1 1,00
Describe valid evidence per fault -0.5 0,50
Find faulty component Identification - 1.5 1,50
Find faulty component Fault Symbol - 1 1,00
Describe valid evidence per fault -0.5 0,50
 Score Competitor
No Criterion Description Add - (Extra Aspect Information)
Max 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Repairing (IPC-A-610-D) 3,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00

Reparing Quality OK per fault -1 1,00

Reparing Quality OK per fault -1 1,00

Reparing Quality OK per fault -1 1,00

Validity of measuring results 8,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00

graph 1 and verification 1.0 per fault -1 2,00

graph 1 and verification 1.0 per fault -1 2,00

graph 1 and verification 1.0 per fault -1 2,00

graph 1 and verification 1.0 per fault -1 2,00

Documentation of measuring method 2,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
sketch appropriate method per fault -0,5 0,50
sketch appropriate method per fault -0,5 0,50
sketch appropriate method per fault -0,5 0,50
sketch appropriate method per fault -0,5 0,50
25,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0

TOTAL 100,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
 LOMBA KOMPETENSI SISWA
SEKOLAH MENENGAH KEJURUAN
TINGKAT NASIONAL XXV TAHUN 2017

SOAL

BIDANG LOMBA

ELECTRONICS APPLICATION

4
 ASSEMBLY PROJECT

Test Project Document

LKS_2017_TP16_ASM_EN

Submitted by:
Name : Ina skills Electronics
Member : ASC WSC Team ID
Type : Open Project
Time : 4 Hours
Point : 25 Points

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 1 of 10
Contents
This Test Project proposal consists of the following documentation/files:

1. LKS_2017_TP16_ASM_EN.doc
2. LKS_2017_ TP16_ASM _01_EN.pdf
3. LKS_2017_ TP16_ASM _02_EN.pdf
4. LKS_2017_ TP16_ASM _03_EN.pdf
5. LKS_2017_ TP16_ASM _04_EN.pdf
6. LKS_2017_ TP16_ASM _05_EN.pdf
7. LKS_2017_ TP16_ASM _06_EN.pdf

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 2 of 10
 1. INSTRUCTIONS
Competitors are given 4 hours to complete an electronics assembly project. This test project
shall access competitors in the following areas:

a. Ability to assemble an electronic project based on given drawings, specifications and

instructions like :

 Schematic Diagrams
 PCB Layout Diagrams
 Assembly Photographs
 Component Part Lists
 Component Data Sheets

b. Ability to verify proper operation of an electronic project after assembly like :

 Interpret test specifications

 Demonstrate proper operation of complete project

2. DESCRIPTION PROJECT AND TASKS

This is the similar device used to watchdog the time taken to boil either half or hardboiled
egg. Music with different tempo depending on the type of boiled eggs will be heard during the
boiling process. The timing process also can be seen on the display. When the time
ended, the buzzer will sound.

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 3 of 10
 Fig 2 3D view

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 4 of 10
 Fig 2. side view

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 5 of 10
 2.4 Equipment, machinery, installations and materials required.
Proposal committee prepares the following equipment, machinery, installations and
materials.

Item Qty Material Description Notes

1 1 set All parts

2 1 Safety glass

3 1 Cotton Glove

Competitor prepares the following equipments, machinery, installations and materials.

Item Qty Material Description Notes

Universal Digital or Multi-

2 1 V, Ω, A, etc
meter
3 1 Soldering Iron

4 1 Soldering Iron Stand

5 1 Solder attractor

6 1 Pincer

7 1 Nipper

8 1 Wire Stripper

9 1 Tweezers

10 1 Precise screwdriver For trimmer resistor

11 1 Screw driver + type

12 1 Screw driver - type

13 1 Brush

14 Ect…

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 6 of 10
Part List PCB Main Assembly Project
No No. Part Value Qty. Note
.
1. R1 0,47 Ω 1 Resistor 2 W
2. R2, R3 470 Ω 2 Resistor Smd 1206
3. R4, R5, R8, R9, 1 KΩ 4 Resistor ¼ W
4. R11 1 KΩ 1 Resistor Smd 1206
5. R6, R7 10 KΩ 2 Resistor Smd 1206
6. R16, R20, R21, R18 10 KΩ 4 Resistor Smd 0805
7. R10 330 Ω 1 Resistor Smd 0805
8. R12, R14 330 Ω 2 Resistor Smd 1206
9. R56 330 Ω 1 Resistor ¼ W
10. R13 470 Ω 1 Resistor Smd 1206
11. R15 56 KΩ 1 Resistor ¼ W
12. R17 27 KΩ 1 Resistor ¼ W
13. R19 6Ω8 1 Resistor ¼ W
14. R22 220 Ω 1 Resistor ¼ W
15. R23 180 KΩ 1 Resistor ¼ W
16. R24, R25, R26, R27, R32, R33, 100 KΩ 16 Resistor ¼ W
R34, R35, R40, R41, R42, R43,
R48, R49, R50, R51
17. R28, R29, R30, R31, R36, R37, 10 KΩ 16 Resistor ¼ W
R38, R39, R44, R45, R46, R47,
R52, R53, R54, R55
18. VR1 2 KΩ 1 Multiturn / Variabel
Resistor
19. VR2 5 KΩ 1 Multiturn / Variabel
Resistor
20. C1, C4, C8, C10, C11, C15, 100 nF 7 Cap. SMD 0805
C16
21. C2 100 uF 1 Cap. Alumunium
22. C3, C14 4,7 uF 2 Cap. Alumunium
23. C5 10 uF 1 Cap. Alumunium
24. C6 0,47 uF 1 Cap. Alumunium
25. C7 1 uF 1 Cap. Alumunium
26. C9, C12 22 pF 2 Cap. SMD 0805
27. C13 68 pF 1 Cap. Ceramic
28. D1 Led Red 1 Led Red SMD
29. D2 3V 1 Zener 3 V
30. Q1, H1061 1 TR Darlington

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 7 of 10
31. Q2, Q3, Q7 2N3904 3 TR PNP, Dip
32. Q4, Q5, Q6 C1815 3 TR NPN, Dip
33. Q8, Q9, Q10, Q11, Q12, Q13, BC 857 16 TR PNP, SMD
Q14, Q15, Q16, Q17, Q18, Q19,
Q20, Q21, Q22, Q23
34. S1 4 Pin 5 mm 1 Push Buttom 4 Pin
35. X1 12 MHz 1
36. U1 Atmega 16 1 IC Programing
37. U2 CD4066 1 IC DIP
38. U3 MU3482 1 IC DIP
39. U4, U5 Sn 74Ls138 2 IC SMD
40. P1, P2, P4, P5 2 Pin 5 mm 4 Terminal Block 2 Pin
41. P3 Header 1x6 Pin 1 Pin Header Single
42. P6 3 Pin 5 mm 1 Terminal Block 3 Pin
43. P7 Header 2x2 Pin 1 Pin Header Double
44. P8, P9 Header IDC 2 Pin Header IDC 2x5 (10
2x5 Pin)
45. LS1 Buzzer 5 V 1 Buzzer 5 Volt
46. Soket IC U2 14 Pin 1 Soket IC 14 Pin
47. Soket IC U3 16 Pin 1 Soket IC 14 Pin
48. Soket IC U1 40 Pin 1 Soket IC 14 Pin
49. Jumper Mini 2 Pin 2 Pin 1 Jumper 2 PIN
50. PCB Main 16 x 20 CM 1 PCB Main Double Layer

Part List PCB Panel Assembly Project

No. No. Part Value Qty. Note
1. D1, D2, D3, D4, D5, D6, D7, Led Green 5 64 Led Green 5mm
D8, D9, D10, D11, D12, D13, mm
D14, D15, D16,D17, D18, D19,
D20, D21, D22, D23, D24,D25,
D26, D27, D28, D29, D30, D31,
D32, D33, D34, D35, D36, D37,
D38, D39, D40, D41, D42, D43,
D44, D45, D46, D47, D48, D49,
D50, D51, D52, D53, D54, D55,
D56, D57, D58, D59, D60, D61,
D62, D63, D64,
2. D65 Led Blue 5 mm 1 Led Blue 5 mm
3. P1, P2 Header IDC 2 Header IDC 2X5 (10 Pin)
2X5
4. PCB Panel 16 x 20 CM 1 PCB Panel Double Layer

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 8 of 10
Part list Assembly Project
No. Name Part Value Qty. Note
1. Swith SPDT 3 PIN 1
2. Swith SPST 2 PIN 1
3. Push Buttom 2 PIN 1
4. Speaker 8Ω 0,1W 2 PIN 1
5. Spicer Hexagonal Female- 0,8 CM 4
Female
6. Spicer Hexagonal Female-Male 4 Cm 4
7. Spicer Hexagonal Female-Male 0.5 Cm 4
116x170x76 1
8 Acrylic
mm
9 Cable yellow 0.6mm 50cm
10 Cable red 0.6mm 50cm
11 Cable black 0.6mm 50cm
12 Cable blue 0.6mm 50cm
Diameter 0.6
13 timah
mm
Diameter 0.6
14 timah
mm

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 9 of 10
 SELAMAT BERLATIH !!!
Akan dilakukan revisi soal:
Dan akan di upload : www.inaskills-electronics.com

Test Project for skill 16 Version: 1.0

LKS_2017_TP16_ASM_EN Date: 20.10.16 Page 10 of 10
 1 2 3 4

COQ1 VCC VCC

+12 Q1 COR1 VCC
2 H1061 PIQ103
3 R1
PIQ102
PIR201
PIR101

COR2
R2
0,47 PIR102
PIR301
COR3
R3
POVCC
VCC
COR4
R4
PIQ201COQ2
Q2
COR5
R5
PIQ301COQ3
Q3
470 470 POM\C\E\
MCE PIR401 1k PIR402
PIQ202 POS\L\
SL PIR501 1k PIR502
PIQ302
2N3904 2N3904
A
PIQ10 PIR202 PIR302 A
1PIVR101COVR1
VCC
PIQ203 PIQ30

1
PIR601 PIR701 VR1 3
PIVR103
COR6
R6 COR7
R7 POMCE
MCE POSL
SL
COP1
P1 10K 10K PIVR102 2K PIC102 PIR802 PIR902
COC1
C1 COR8
R8 COR9
R9

2
1
1 PIP101
PIR602 PIR702 PIQ502 PIR10 1 PIC101 100nF 1k 1k
2 COQ4
Q4
2 PIP102
C1815
COR10
R10 330 PIR801 PIR901
PIQ401 PIQ403 PIQ501 PIQ503
Saklar On/Off PIR1 01 COQ5
Q5 PIR10 2
PIR1201 GND

COP2
P2 COR13
R13
PIQ402 COR11
R11
1K
C1815
COR12
R12
330
PIC201 C2
COC2
GND GND

1
1
PIP201
PIR1302 4K7 PIR1301 PIR1 02 PIR1202 PIC202 100uF
2 PIC301 COC3
C3 PID10
2 PIP202
PIQ601 COQ6
Q6

1
Power 12V PIC302 4.7uF PIVR201 COD1
D1
C1815 2PIVR202 COVR2
VR2 VCC
PIQ602

PIVR203
5K PID102 LED
COLS1
LS1
PIQ603 PILS101

3
PIC402 PILS102
PIR1401

Buzzer
B
PIC501 COC5
C5
PID20 COD2
D2 PIC601 COC6
C6
COR14
R14
330 PIC401
COC4
C4
100nF NLBuz er Buzzer B
10uF ZENER 3V 0,47uF COP3
P3 POBuzzer
Buzzer
PIC502 PID201 PIC602 PIR1402 NLVCC
VCC
1 PIP301
NLMISO GND
POGND MISO
GND 2 PIP302
NLSCK
SCK
3 PIP303
NLRESET COU1
4 PIP304RESET U1
GND NLGND
GND POSTART 1 40
5 PIP305
NLMOSI Start PIU101 PB0 (XCK/T0) PA0 (ADC0) PIU1040
MOSI POTIME1 2 39
6 PIP306 Time1 PIU102 PB1 (T1) PA1 (ADC1) PIU1039

POTIME2 3 38
Time2 PIU103 PB2 (INT2/AIN0) PA2 (ADC2) PIU1038
Program In 4 37
COU2A
COU2B
PIU104 PB3 (OC0/AIN1) PA3 (ADC3) PIU1037
POTempo U2A 4066 5 36
VCC Tempo 11 PIU105 PB4 (SS) PA4 (ADC4) PIU1036
13 MOSI 6 35
COR15
R15 PIU2013 CNTL PIU106 PB5 (MOSI) PA5 (ADC5) PIU1035
1 2 MISO 7 34
PIR1602 PIR1502 56k PIR1501 PIU201 IN/OUT OUT/IN PIU202
SCK
PIU107 PB6 (MISO)
8
PA6 (ADC6) PIU1034
33
COR16
R16 PIU108 PB7 (SCK) PA7 (ADC7) PIU1033
14 7
Start 10K POOSC2
PIU2014 VDD GND PIU207
NLPD00 14
OSC2 PD.0 22
1
1
PIP401 PIR1601 POStart
Start U2B 4066
POOSC1
OSC1 POPD00
PD.0 NLPD01 PIU1014
PD.1 15
PD0 (RXD) PC0 (SCL) PIU1022
23
Tempo 1 1
POTEMPO
2
2
PIP402
PIC701 COR17
R17 5
POPD01
PD.1 NLPD02 PIU1015
PD.2 16
PD1 (TXD) PC1 (SDA) PIU1023
24
Tempo 2 2
POTEMPO
COC7
C7 PIR1702 27k PIR1701 PIU205 CNTL POPD02
PD.2 NLPD03 PIU1016 PD2 (INT0) PC2 (TCK) PIU1024
COP4 4 3 PD.3 17 25
C P4 PIC702 1uF PIU204 IN/OUT OUT/IN PIU203 VCC POPD03
PD.3 NLPD04PIU1017
PD.4 18
PD3 (INT1) PC3 (TMS) PIU1025
26
POM\C\E\
MCE C
Tempo 22
POTempo POPD04
PD.4 NLPD05 PIU1018 PD4 (OC1B) PC4 (TDO) PIU1026
14 7 PD.5 19 27
PIU2014 VDD
COC8
C8
GND PIU207 PIR1801 POPD05
PD.5 NLPD06 PIU1019
PD.6 20
PD5 (OC1A) PC5 (TDI) PIU1027
28
POS\L\
SL
GND VCC GND COR18
R18 POPD06
PD.6 NLPD07 PIU1020 PD6 (ICP1) PC6 (TOSC1) PIU1028
10K POPD07PD.7PIU1021
21 29 POBUZZER
PIC802 PIC801 PD.7 PD7 (OC2) PC7 (TOSC2) PIU1029 Buzzer
100nF PIR1802 RESET 9
PIU109 RESET AVCC
30
PIU1030

VCC PIS102COS1 COC9

C9
PIC901
22pF
PIC902
13
PIU1013 XTAL1
GND
AREF
31
PIU1031
32
PIU1032 VCC
VCC
S1 COX1
X1 PIX101 10
COU3
U3 VCC PIR1902 12 MHz VCC PIU1010
PIC1 02
PIX102
6R8
NLMCE
MCE 2 16 C10
COC10 COR19
R19
PIR20 2 PIR2102 POMCE
MCE PIU302 CE VDD PIU3016 COC12 PIC1202
C12 22pF 12 11 COC11
C11
COR20
R20
10K
COR21
R21
10K POOSC2
OSC2
14
PIU3014 OSC2
5
AS PIU305 PIC1002 PIC1001
1 100nF
GND
R1901 1 1
PIPIP501
COP5
P5
PIS10 PIC1201 PIU1012 XTAL2
ATmega16-16PU
GND PIU1011
PIC1 01 100nF
15 TSP PIU301 2
COP6
P6 PIR20 1 PIR2101 PIU3015 OSC1 PIP502 2 GND
1 PIP601 POTime1
Time1
POOSC1
OSC1 COC13
C13
PIC1301 PIC1302
13
PIU3013 NC
MT1
12
PIU3012
9 COR22
R22
PIQ701 COQ7
Speaker GND
GND
2 PIP602 68pF MTO PIU309 Q7
POTime2 POSL
SL PIR2201220 PIR2202 PIQ702
2N3904
3 PIP603 Time2 4
PIU304 SL 10
D
Selector
VCC
PIP701
COP7
P7
1 2 PIP702
3
PIU303
6
PIU306
LP
NC
OP1
OP2
PIU3010

11
PIU3011 COR23
R23
VCC PIQ703 D
8 7
GND PIP703 3 4 PIP704 PIU308 VSS ENV PIU307 PIR2301180kPIR2302 *
Title ASSEMBLY MAIN 1 *
Header 2X2 MU3482 COC14
C14 GND
*
GND GND Size: A4 Number:* Revision:*
PIC1402 PIC1401 *
4,7 uF Date: 29/11/2016 Time: 17:49:11 Sheet * of * *
File: C:\Users\ASC\Documents\design altium\Assembly Project 2017\Assembly Project\Assembly Project 1.SchDoc
1 2 3 4
 1 2 3 4

VCC VCC VCC VCC

A PIR2402 PIR2502 PIR2602 PIR2702 A

PIQ801COQ8 PIQ901COQ9 PIQ10 COQ10 PIQ1 0 COQ11

R24 R25 R26 R27

100K

100K

100K

100K
COR24 COR25 COR26 COR27
COR28
R28 PIR2401 COR29
R29 PIR2501 COR30
R30 PIR2601 COR31
R31
COU4
U4 VCC POD0A
D_A PIR280110K PIR2802PIQ803
Q8
POD0B
D_B PIR290110K PIR2902PIQ903
Q9
POD0C
D_C PIR300110K PIR3002PIQ1003
Q10
POD0D PIR2701
D_D PIR310110K PIR3102PIQ1103
Q11
1 16 BC857 BC857 BC857 BC857
POPD00
PD.0 PIU401 A0 VCC PIU4016
POPD01
PD.1
POPD02
PD.2
2
PIU402
3
PIU403
A1
A2 Y0
15
PIU4015 POD0A
D_A
PIQ802 PODATA AData A
PIQ902 PODATA B Data B
PIQ10 2 PODATA C
Data C
PIQ1 02 PODATA D
Data D
14 POD0B
Y1 PIU4014 D_B
13 POD0C
Y2 PIU4013 D_C
VCC VCC 12
PIU4012 POD0D
Y3 D_D
6
PIU406 11
PIU4011 POD0E VCC VCC VCC VCC
PIC1502 E3 Y4 D_E
5
PIU405 E2
10 POD0F
COC15
C15 PIU404 Y5 PIU4010 D_F PIR3202 PIR3 02 PIR3402 PIR3502
4 9 POD0G
E1 Y6 PIU409 D_G
PIC1501 PIQ1201COQ12 PIQ1301COQ13 PIQ1401COQ14 PIQ1501COQ15

100K

100K

100K

100K
R32
COR32 R33
COR33 R34
COR34 R35
COR35
100nF PIU408
8 7
GND Y7 PIU407 POD0H
D_H
SN74LS138D
COR36
R36 PIR3201 Q12 COR37
R37 PIR3 01 Q13 COR38
R38 PIR3401 Q14 COR39 PIR3501
R39 Q15
POD0E
D_E PIR360110K PIR3602PIQ1203 POD0F
D_F PIR370110K PIR3702PIQ1303 POD0G
D_G PIR380110K PIR3802PIQ1403 POD0H
D_H PIR390110K PIR3902PIQ1503
GND GND BC857 BC857 BC857 BC857

B
PIQ120 Data E E
PODATA
PIQ1302 Data F F
PODATA
PIQ1402 Data G G
PODATA
PIQ1502 Data H H
PODATA B

Scan 1 1
POScan Scan 2 2
POSCAN Scan 3 3
POSCAN Scan 4 4
POSCAN
PIR40 2 PIR4102 PIR4202 PIR4302
PIQ1601 PIQ1701 PIQ1801 PIQ1901
R40 R41 R42 R43
100K

100K

100K

100K
COR40 COR41 COR42 COR43
COR44
R44 PIR40 1 COQ16 COR45
R45 PIR4101 COQ17 COR46
R46 PIR4201 COQ18 COR47
R47 COQ19
COU5
U5 VCC POS01
S_1 PIR440110K PIR4402PIQ1603
Q16
POS02
S_2 PIR450110K PIR4502PIQ1703
Q17
POS03
S_3 PIR460110K PIR4602PIQ1803
Q18
POS04 PIR4301
S_4 PIR470110K PIR4702PIQ1903
Q19
1 16 BC857 BC857 BC857 BC857
POPD03
PD.3 PIU501 A0 VCC PIU5016
POPD04
PD.4
POPD05
PD.5
3
2
PIU502
PIU503
A1
A2 Y0
15
PIU5015 POS01
S_1
PIQ1602 PIQ1702 PIQ1802 PIQ1902
14 POS02
Y1 PIU5014 S_2
13 POS03 GND GND GND GND
Y2 PIU5013 S_3
VCC VCC 12 POS04
Y3 PIU5012 S_4
6 11 POS05
PIC1602 PIU506 E3 Y4 PIU5011 S_5
5 10
COC16 PIU505 E2
C16 PIU5044
Y5 PIU5010
9
POS06
S_6
E1 Y6 PIU509 POS07
S_7 Scan 5 5
POScan Scan 6 6
POSCAN Scan 7 7
POSCAN Scan 8 8
POSCAN
C
PIC1601 100nF PIU508
8
GND Y7
7
PIU507 POS08
S_8
PIR4802 PIR4902 PIR50 2 PIR5102 C
100K

100K

100K

100K
PIQ20 1COQ20 PIQ210 COQ21 PIQ2 01COQ22 PIQ2301COQ23
R48 R49 R50 R51
COR48 COR49 COR50 COR51
SN74LS138D
GND GND
COR52
R52 PIR4801 Q20 COR53
R53 PIR4901 Q21 COR54
R54 PIR50 1 Q22 COR55
R55 PIR5101 Q23
POS05
S_5 PIR520110K PIR5202PIQ2003 BC857 POS06
S_6 PIR530110K PIR5302PIQ2103 BC857 POS07
S_7 PIR540110K PIR5402PIQ2203 BC857 POS08
S_8 PIR550110K PIR5502PIQ2303 BC857

PIQ20 2 PIQ2102 PIQ2 02 PIQ2302

GND GND GND GND

COP8
P8 COP9
P9
Data A APIP801 1
POData 2 PIP802POData
Data B B Scan 1 1PIP901 1
POSCAN 2 PIP902POScan
Scan 2 2
Data C CPIP803 3
POData 4 Data D D
PIP804POData Scan 3 3PIP903 3
POScan 4 PIP904 Scan 4 4
POScan
Data E E
POData PIP805 5 6 PIP806 Data F F
POData Scan 5 5
POSCAN PIP905 5 6 PIP906 Scan 6 6
POScan
D Data G GPIP807 7
POData 8 PIP808 Data H H
POData Scan 7 7PIP907 7
POScan 8 PIP908 Scan 8 8
POScan D
PIP809 9 10 PIP8010POPD06
PD.6 COR56
R56 PIP909 9 10 PIP9010
POPD07
PD.7 PIR5601330 PIR5602 Title ASSEMBLY MAIN 2 *
Header 5X2 Header 5X2 *
*
Size: A4 Number:* Revision:*
*
Date: 29/11/2016 Time: 17:49:11 Sheet * of * *
File: C:\Users\ASC\Documents\design altium\Assembly Project 2017\Assembly Project\Assembly Project 2.SchDoc
1 2 3 4
 1 2 3 4

COLED1
LED1 COLED2
LED2 COLED3
LED3 COLED4
LED4 COLED5
LED5 COLED6
LED6 COLED7
LED7 COLED8
LED8
PILED101 PILED102 PILED201 PILED202 PILED301 PILED302 PILED401 PILED402 PILED501 PILED502 PILED601 PILED602 PILED701 PILED702 PILED801 PILED802
A A
Data AA
NLData
Data A A
POData
COLED9
LED9 COLED10
LED10 COLED11
LED11 COLED12
LED12 COLED13
LED13 COLED14
LED14 COLED15
LED15 COLED16
LED16
PILED901 PILED902 PILED1001 PILED1002 PILED1101 PILED1102 PILED1201 PILED1202 PILED1301 PILED1302 PILED1401 PILED1402 PILED1501 PILED1502 PILED1601 PILED1602

Data BB
NLData
Data B B
POData
COLED17
LED17 COLED18
LED18 COLED19
LED19 COLED20
LED20 COLED21
LED21 COLED22
LED22 COLED23
LED23 COLED24
LED24
PILED1701 PILED1702 PILED1801 PILED1802 PILED1901 PILED1902 PILED2001 PILED2002 PILED2101 PILED2102 PILED2201 PILED2202 PILED2301 PILED2302 PILED2401 PILED2402

Data CC
NLData
Data C C
POData
COLED25
LED25 COLED26
LED26 COLED27
LED27 COLED28
LED28 COLED29
LED29 COLED30
LED30 COLED31
LED31 COLED32
LED32
PILED2501 PILED2502 PILED2601 PILED2602 PILED2701 PILED2702 PILED2801 PILED2802 PILED2901 PILED2902 PILED3001 PILED3002 PILED3101 PILED3102 PILED3201 PILED3202

NLData
Data D D
Data D D
POData
COLED33
LED33 COLED34
LED34 COLED35
LED35 COLED36
LED36 COLED37
LED37 COLED38
LED38 COLED39
LED39 COLED40
LED40
B B
PILED3301 PILED3302 PILED3401 PILED3402 PILED3501 PILED3502 PILED3601 PILED3602 PILED3701 PILED3702 PILED3801 PILED3802 PILED3901 PILED3902 PILED4001 PILED4002

POData Data EE
NLData
Data E E
COLED41
LED41 COLED42
LED42 COLED43
LED43 COLED44
LED44 COLED45
LED45 COLED46
LED46 COLED47
LED47 COLED48
LED48
PILED4101 PILED4102 PILED4201 PILED4202 PILED4301 PILED4302 PILED4401 PILED4402 PILED4501 PILED4502 PILED4601 PILED4602 PILED4701 PILED4702 PILED4801 PILED4802

Data F F
POData Data FF
NLData
COLED49
LED49 COLED50
LED50 COLED51
LED51 COLED52
LED52 COLED53
LED53 COLED54
LED54 COLED55
LED55 COLED56
LED56
PILED4901 PILED4902 PILED5001 PILED5002 PILED5101 PILED5102 PILED5201 PILED5202 PILED5301 PILED5302 PILED5401 PILED5402 PILED5501 PILED5502 PILED5601 PILED5602

POData Data GG
NLData
Data G G
COLED57
LED57 COLED58
LED58 COLED59
LED59 COLED60
LED60 COLED61
LED61 COLED62
LED62 COLED63
LED63 COLED64
LED64
PILED5701 PILED5702 PILED5801 PILED5802 PILED5901 PILED5902 PILED6001 PILED6002 PILED6101 PILED6102 PILED6201 PILED6202 PILED6301 PILED6302 PILED6401 PILED6402

POData Data HH
NLData
Data H H
C C

Scan 1

Scan 2

Scan 3

Scan 4

Scan 5

Scan 6

Scan 7

Scan 8
NLScan 1 NLScan 2 NLScan 3 NLScan 4 NLScan 5 NLScan 6 NLScan 7 NLScan 8

POScan1 POScan2 POScan3 POScan4 POScan5 POScan6 POScan7 POScan8

Scan 1

Scan 2

Scan 3

Scan 4

Scan 5

Scan 6

Scan 7

Scan 8
COP1
P1 COP2
P2
Data A APIP101 1
PODATA 2 PIP102 Data B B
PODATA Scan 1 1PIP201 1
POSCAN 2 PIP202 Scan 2 2
POSCAN
Data C CPIP103 3
PODATA 4 PIP104 Data D D
PODATA Scan 3 3PIP203 3
POSCAN 4 PIP204 Scan 4 4
POSCAN
Data E EPIP105 5
PODATA 6 Data F F
PIP106PODATA Scan 5 5PIP205 5
POSCAN 6 Scan 6 6
PIP206POSCAN
Data G GPIP107 7
PODATA 8 Data H H
PIP108PODATA Scan 7 7PIP207 7
POSCAN 8 Scan 8 8
PIP208POSCAN
PIP109 9 10 PIP1010
COLED65
LED65 PIP209 9 10 PIP2010

Header 5X2 Header 5X2

PILED6501 PILED6502

D D

Title ASSEMBLY PANEL *

*
*
Size: A4 Number:* Revision:*
*
Date: 29/11/2016 Time: 17:48:08 Sheet * of * *
File: C:\Users\ASC\Documents\design altium\Assembly Project 2017\Assembly Project Panel\Assembly Project Panel.SchDoc
1 2 3 4
 FAULT FINDING, REPAIR
AND MEASUREMENT

Test Project Document

LKS_2017_TP16_FFRM_EN

Submitted by:
Name : ASC WSC Team
Member : Ina skills Electronics
Type : Close Project
Time : 4 Hours
Point : 25 Points
 1. INTRODUCTION TO TEST PROJECT DOCUMENTATION

1. Introduction To Test Project Documentation................................................. 2

2. Contents ........................................................................................................... 3

3. Introduction ...................................................................................................... 4

4. Description Of Project & Task ........................................................................ 5

5. Instruction To The Competitors ...................................................................... 6

6. Equipment, Machinery, Installations And Materials Required .................... 10

7. Marking Scheme ............................................................................................ 19

8. Others ............................................................................................................. 20

Test Project proposal for skills competition Version: 1.0 2

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 2. CONTENTS

This Test Project proposal consists of the following documentation/files:

a. LKS_2017_XXI_TP16_FFRM_EN.docx

b. Data sheets (on computer dekstop)

Test Project proposal for skills competition Version: 1.0 3

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 3. INTRODUCTION

This Test Project is a Stereo Multiplex (MPX) and FM Transmitter test, Instead of

using special purpose ICs to produce the waveforms this design uses ordinary

HCMOS logic. Audio Frequency (AF) signals are produced using binary counters

and combinational logic and then filtered to obtain two very low distortion sine waves

to serve as the test tones. These audio signals are then multiplexed by a 38 KHz

Sub-Carrier to form a Left+Right and a Left-Right Double Side-Band Suppressed

Carrier (DSBSC) signal to form the Stereo Multiplex (MPX). No fault and no

measurement in the oscillator FM/ Modulation FM Block.

Fig. 1 PCB FFRM TASK

Test Project proposal for skills competition Version: 1.0 4

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 4. DESCRIPTION OF PROJECT & TASK

The block diagram of the Stereo Multiplex (MPX) and FM Transmitter is shown in
Fig. 2.

Manual Control
Clock Logic

Multiplexer
&
Summer
MPX
Output
Audio 19 KHz
38kHz
Signal
Generator

Fig. 2 Block Diagram of Stereo Multiplex (MPX) and FM Transmitter test

Fig. 3: Audio Signals, Sub-Carrier and Multiplexed (MPX) Signals

The Signal Generator generates the 38 KHz sub-carrier and 19 KHz pilot tone. It

uses an ingenious technique to generate 2 sine waves (audio) with very low

distortion at around 300 Hz and 1.2 KHz.

The 38 KHz sub-carrier is used to multiplex the audio signals and then summed with

the 19 KHz pilot tone by the Multiplexer & Summer to form 16 different waveforms

Test Project proposal for skills competition Version: 1.0 5

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 (Fig 4). The audio signals being encoded as Left or Right is based on the phase of

the sub-carrier.

The 16 different waveforms

300 Hz right/ 1.2 KHz left MPX no 19 KHz pilot

300 Hz right/ 1.2 KHz left MPX with 19 KHz pilot
1.2 KHz left only MPX no 19 KHz pilot
1.2 KHz left only MPX with 19 KHz pilot
300 Hz left only MPX no 19 KHz pilot
300 Hz left only MPX with 19 KHz pilot
300 Hz left/1.2 KHZ right MPX no 19 KHz pilot
300 Hz left/1.2 KHZ right MPX with 19 KHz pilot
1.2 KHz right only MPX no 19 KHz pilot
1.2 KHz right only MPX with 19 KHz pilot
300 Hz right only MPX no 19 KHz pilot
300 Hz right only MPX with 19 KHz pilot
300 Hz + 1.2 KHz mono audio only
1.2 KHz mono audio only
300 Hz mono audio only
19 KHz pilot only
Fig. 4. The 16 different waveforms

The state of the Control Logic is advanced by the Manual Clock. In manual mode it

is done by a Push Button with a de-bouncing circuit.

Test Project proposal for skills competition Version: 1.0 6

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 6. INSTRUCTION TO THE COMPETITORS

Fault Finding and Repair

1. Supply voltage of 12 + 0.1 volts to be applied to terminal P1, please take note

of the polarity.

2. Adjust R5 to set the frequency 153 KHz + 0.5 KHz of the clock output at

U7_3. If competitor board doesn’t match with the frequency, competitor can

exchange the board to jury.

3. There are 3 faults which do not correspond to the demand specifications. Find

and repair it.

4. Describe Defective Part and Fault Symbol.

5. When you request repair parts, both of the Competitor and the Jury have to

sign to part list.

6. Describe the evidence of the repair.

FAULT DESCRIPTION FAULT DESCRIPTION

SYMBOL SYMBOL

Open Stuck at high voltage

(part, wire or PCB trace) (Pin, input, output, etc.)

Short Stuck at low voltage

(part, wire or PCB trace) (Pin, input, output, etc.)

Part with larger value Incorrect part number or

(resistor, capacitor, etc.) ? wiring connecting

Part with smaller value Wrong Polarity

(Resistor, capacitor, etc.) +/-

Fig.5 Fault Symbol Table

Test Project proposal for skills competition Version: 1.0 7

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 You may use the following Labels:

LOCATION CATEGORY SAMPLE

Power +5V/+12V/-5V/+5V/GND

Pin of IC IC2_8

Component of R/C/L R7_1（left/up:1 right/down:2）

Test Point TP1

Between Two Components R1-R2

Fig.6 Location Symbols Table

DEFECTIVE PART FAULT SYMBOL

Fault #1 IC2_8 - R7_1

BEFORE AFTER

Measurement
Voltage at R7_ 1 below Voltage at R7_ 1
#1
than 1V approximately 5V

Node: _ R7_1______

Fig.7 Example of description of answer script

(Condition: the frequency of the oscillator is too high.)

Test Project proposal for skills competition Version: 1.0 8

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 DEFECTIVE PART FAULT SYMBOL

Fault #2 R1

BEFORE AFTER

Measurement 5.00V 5.00V

#2

GND GND

Node: _TP1______

2ms 4ms

1.00V/DIV

1.00ms/DIV

Fig.8 Example of description of answer script

(Condition: the frequency of the oscillator is too high.)

Test Project proposal for skills competition Version: 1.0 9

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 7. MEASUREMENT

Measure the following items:

1. Measure and record the frequency at U19_1

2. Press S1 button until signal out U10_12 = LOW, U10_9 = HIGH, U10_8 =
HIGH, U10_11 = LOW, then measurement MPX OUT signal at P4.
3. .........................
4. ........................
For each measurement, sketch a schematic showing how to measure, using

following equipment symbols.

EQUIPMENT SYMBOL

Power Supply

Voltmeter V

Ammeter A

Oscilloscope

Function Generator FG

GND

Fig.9 Equipment Symbol Table

Vcc
TP2

TP1
5V

CH1 CH2
GND

Fig.10 Example of Measurement Schematic

Test Project proposal for skills competition Version: 1.0 10

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 8. EQUIPMENT, MACHINERY, INSTALLATIONS AND MATERIALS REQUIRED

ITEM QTY MATERIAL DESCRIPTION NOTES

1 1 FFRM PCB Material for the

project

Fig.11 Example of Measurement Schematic

Test Project proposal for skills competition Version: 1.0 11

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
9. PCB AND SCHEMATIC

Fig. 12. Schematics – Sheet 1

12
Fig. 13. Schematics – Sheet 2

13
Fig. 14. Schematics – Sheet 3

14
Fig. 15. PCB Top Overlay

15
Fig. 16. PCB Bottom layer

16
Fig. 17. PCB Top layer

17
 10. MARKING SCHEME

MAX MARK ASPECT OF CRITERION - DESCRIPTION

12 Finding faulty spots and evidence

3 Repairing (IPC-A-610-D)

8 Validity of measuring results

2 Documentation of measuring method

Fig. 19. Marking

Test Project proposal for skills competition Version: 1.0 19

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 11. OTHERS

1. Part List for repairing

2. Fault Finding and Repair – Answer Script

3. Measurement – Answer Script

Part list for repairing

S/N DESCRIPTION VALUE DESIGNATOR QTY. COMPETITOR COMPETITOR JURY

REQUEST SIGNATURE SIGNATUR
E

1 Resistor ¼ W 1% 1,8 Ω R1 1

2 Resistor ¼ W 1% 390 KΩ R2 1

3 Resistor ¼ W 1% 150 KΩ R3 1

4 Resistor ¼ W 1% 10 KΩ R4, R11 2

5 Resistor ¼ W 1% 120 KΩ R6 1

R7, R9, R14,

6 Resistor ¼ W 1% 12 KΩ R15, R22, R26, 7
R27

7 Resistor ¼ W 1% 47 KΩ R8 1

8 Resistor ¼ W 1% 82 KΩ R10 1

9 Resistor ¼ W 1% 39 KΩ R12 1

R13, R17, R18,

10 Resistor ¼ W 1% 1 KΩ 5
R19, R20

11 Resistor ¼ W 1% 68 KΩ R16 1

12 Resistor ¼ W 1% 6,8 KΩ R21 1

13 Resistor ¼ W 1% 330 KΩ R23, R24 2

14 Resistor ¼ W 1% 4,7 KΩ R25, R30 2

15 Resistor ¼ W 1% 560 KΩ R28 1

Test Project proposal for skills competition Version: 1.0 20

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 S/N DESCRIPTION VALUE DESIGNATOR QTY. COMPETITOR COMPETITOR JURY
REQUEST SIGNATURE SIGNATUR
E

16 Resistor ¼ W 1% 1,5 KΩ R29 1

Multiturn /
17 5 KΩ R5 1
Variabel Resistor

C1, C3, C4, C5,

C6, C7, C8, C9,
C10, C13, C15,
18 Cap. MKM 100 nF 20
C16, C17, C18,
C19, C20, C21,
C26, C28, C30

19 Cap. Ceramic 150 pF C2 1

20 Cap. MKM 330 nF C11 1

21 Cap. Ceramic 680 pF C12 1

22 Cap. Tantalum 2,2 uF C14 1

23 Cap. Ceramic 68 pF C22 1

24 Cap. MKM 1 nF C23, C32 2

25 Cap. Ceramic 220 pF C24 1

26 Cap. MKM 4,7 nF C25 1

27 Cap. Electrolit 47 uF C27, C29 2

28 Cap. MKM 22 nF C31 1

29 IC Regulator L 7805 U1, 1

HD
30 IC Logic Gate U2, U6, U8 3
74HC86N

SN
31 IC Logic Gate U3, U13 2
74HC08N

SN
32 IC Logic Gate U4, 1
74HC32N

IC Binary
33 74HC4040 U5, 1
Counter 12

Test Project proposal for skills competition Version: 1.0 21

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 S/N DESCRIPTION VALUE DESIGNATOR QTY. COMPETITOR COMPETITOR JURY
REQUEST SIGNATURE SIGNATUR
E

34 IC Timer NE555 U7, U9 2

SN
35 IC Counter U10 1
74LS93

36 IC Logic Gate 74HC4075 U11, U14 2

SN
37 IC Logic Gate U12 1
74HC04

38 IC SMD 74HC4060 U15 1

39 IC Op Amp TLV2372 U16, U17 2

Led Red
40 Led Red D1 1
3mm

Led Green
41 Led Red D2, D3, D4, D5 4
3mm

42 Push Buttom PB 2 Pin S1 1

Terminal Block 3 T-Block 2

43 P1 1
Pin Pin

Header Molek 2 Header

44 P2 1
Pin Molek

Soket Molek 2 Soket

45 P2` 2
Pin Molek

Headsink Headsink
46 U1` 1
Almunium L7805

U2`, U3`, U4`,

U7`, U8`, U10`,
47 Soket IC 14 Pin 14 Pin U11`, U12`, 11
U13`, U14`,
U15`

48 Soket IC 16 Pin 16 Pin U5` 1

U6`, U9`, U16`,

49 Soket IC 8 Pin 8 Pin 4
U17`

Spiser
50 Spiser 1 Cm 4
Hexagonal

Wire AWG22
51 Wire 20 Cm 1
Red

Test Project proposal for skills competition Version: 1.0 22

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 S/N DESCRIPTION VALUE DESIGNATOR QTY. COMPETITOR COMPETITOR JURY
REQUEST SIGNATURE SIGNATUR
E

Wire AWG22
52 Wire 20 Cm 1
Black

53 Wire 20 Cm Wire 2 Layer 1

PCB Double 16 x 10 PCB Fault

54 1
Layer CM Finding

Test Project proposal for skills competition Version: 1.0 23

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Fault Finding & Repair – Answer Script

DEFECTIVE PART FAULT SYMBOL

Fault #1

BEFORE AFTER

Measurement

#1

Node: _______

DEFECTIVE PART FAULT SYMBOL

Fault #2

BEFORE AFTER

Measurement

#2

Node: _______

Test Project proposal for skills competition Version: 1.0 24

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 DEFECTIVE PART FAULT SYMBOL

Fault #3

BEFORE AFTER

Measurement

#3

Node: _______

Test Project proposal for skills competition Version: 1.0 25

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Measurement – Answer Script
Measurement #1
Measurement SCHEMATIC

Measurement Output
Vertical Settings:

/div

Horizontal Settings:

/div

Test Project proposal for skills competition Version: 1.0 26

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Verification output graph

Calculation Volt peak to peak with formula Calculation frequency with formula

...... ......

Test Project proposal for skills competition Version: 1.0 27

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Measurement #2
Measurement SCHEMATIC

Measurement Output
Vertical Settings:

/div

Horizontal Settings:

/div

Test Project proposal for skills competition Version: 1.0 28

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Verification output graph

Calculation Volt peak to peak with formula

......

Test Project proposal for skills competition Version: 1.0 29

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Measurement #3
Measurement SCHEMATIC

Measurement Output
Vertical Settings:

/div

Horizontal Settings:

/div

Test Project proposal for skills competition Version: 1.0 30

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Verification output graph

Calculation Volt peak to peak with formula

......

Test Project proposal for skills competition Version: 1.0 31

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Measurement #4
Measurement SCHEMATIC

Measurement Output
Vertical Settings:

/div

Horizontal Settings:

/div

Test Project proposal for skills competition Version: 1.0 32

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 Verification output graph

Calculation Volt peak to peak with formula Calculation frequency with formula

...... ......

Test Project proposal for skills competition Version: 1.0 33

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 SELAMAT BERLATIH !!!
Akan dilakukan revisi soal:

Dan akan di upload : www.inaskills-electronics.com

Test Project proposal for skills competition Version: 1.0 34

LKS_2017_XXV_TP16_FFRM_EN Date: 20.10.2016
 1 2 3 4

COJ2
J2 COJ3
J3 COJ4
J4
TP TP TP

POLED0 POLED1 POLED2 POLED3 PIJ201 PIJ301 PIJ401

LED0

LED1

LED2

LED3
A PORB0 COR1
R1 100 4 A
+5 RB0 PIR102 PIR101 PIDM104 R1
PORB1 COR2
R2
PIR202 100
PIR201 7
PIDM107
1 2 POADC2 RB1 COR3 R2
PIS101 GND Z PIS102 ADC2 PORB2 R3 100 2
PIR502 PIR602 PIR702 PIR802 RB2 PIR302 PIR301 PIDM102 R3
Y
3
PIS103 POADC1
ADC1 PORB3
RB3
COR4
R4
PIR402 100
PIR401
8
PIDM108 R4
COR5
R5 COR6
R6 COR7
R7 COR8
R8 COR9
R9 100 13
4 POADC0 PORB4
RB4 PIR902 PIR901 PIDM1013 R5
470 470 470 470 5
PIS105 X PIS104 ADC0 PORB5 COR10
R10
PIR1002 100
PIR1001 1
PIDM101
PIR501 PIR601 PIR701 PIR801 +5 RB5 COR11 R6
PORB6 R11
PIR1102 100
PIR1101 11
PIDM1011
COS1
S1 RB6 COR12 R7
PORB7 R12 100 16
RB7 PIR1202 PIR1201 PIDM1016 R8
PID10 PID201 PID301 PID401 GND

C1
C2
C3
C4
C5
C6
C7
C8
COD1
D1 COD2
D2 COD3
D3 COD4
D4
COJ5
J5 COJ6
J6
PID102 led
PID20 led
PID302 led
PID402 led
+5 TP TP 8 x 8 dot matrix
PIDM109 PIDM10 PIDM104 PIDM103 PIDM10 5 PIDM105 PIDM106 PIDM102

9
10
14
3
15
5
6
12
PIJ501 PIJ601 Dot Matrix 3,3"
PIVR103 VR1
COVR1 CODM1
DM1
PORD0PORD1PORD2PORD3PORD4PORD5PORD6PORD7

RD0
RD1
RD2
RD3
RD4
RD5
RD6
RD7
PIVR102 POADC3
ADC3
GND
GND PIVR101 5K
B COJ1A
COJ1B
J1A J1B B
GND a1
PIJ10a1
c1
PIJ10c1
a2
PIJ10a2
c2
PIJ10c2
a3
PIJ10a3 c3
PIJ10c3
PORB7 NLRB7
RB7 a4 c4 NLRB6 PORB6
RB6
RB7 NLRB5
PIJ10a4 PIJ10c4
NLRB4 RB6
PORB5 RB5 a5 c5 RB4
RB5 NLRB2 PORB4
RB4
PIJ10a5 PIJ10c5
NLRB3 RB3 a6 c6 RB2
PORB3
RB3 NLRB1
PIJ10a6 PIJ10c6
NLRB0 PORB2
RB2
PORB1 RB1 a7 c7 RB0 PORB0
RB1 PIJ10a7 PIJ10c7 RB0
a8
PIJ10a8 c8
PIJ10c8
+5 +5 +5 +5 a9
PIJ10a9
c9
PIJ10c9
NLRD7
RD7 a10 c10 NLRD6
RD6
PIR1302 PIR1402 PIR1502 PIR1602 PORD7
RD7 NLRD5
PIJ10a10 PIJ10c10
NLRD4 PORD6
RD6
PORD5 RD5 a11 c11 RD4
RD5 NLRD2 PORD4
RD4
PIJ10a11 PIJ10c11
COR13
R13 COR14
R14 COR15
R15 COR16
R16 NLRD3
RD3 a12 c12 RD2
PORD3
RD3 PIJ10a12 PIJ10c12 PORD2
RD2
10K 10K 10K 10K PORD1 NLRD1
RD1 a13 c13 NLRD0 PORD0
RD0
PIR1301 PIR1401 PIR1501 PIR1601 RD1 PIJ10a13 PIJ10c13 RD0
a14
PIJ10a14
c14
PIJ10c14
PORC0
RC0 PORC1
RC1 PORC2
RC2 PORC3
RC3 a15
PIJ10a15
c15
PIJ10c15

POLED3 a16 c16 POLED2

LED3 PIJ10a16 PIJ10c16 LED2
PISW102 PISW104COSW1 PISW20 PISW204COSW2 PISW302 PISW304COSW3 PISW402 PISW40 COSW4 POLED1
LED1
POADC3
ADC3
NLRA3
RA3
a17
PIJ10a17
a18
PIJ10a18
c17
PIJ10c17
c18
PIJ10c18
NLRA2 POLED0
RA2
LED0
POADC2
ADC2
C SW1 SW2 SW3 SW4 NLRA1
RA1 a19 c19 NLRA0
RA0 C
btn btn btn btn POADC1
ADC1 PIJ10a19
a20
PIJ10c19
c20
POADC0
ADC0
PIJ10a20 PIJ10c20
a21
PIJ10a21
c21
PIJ10c21

PISW10 PISW103 PISW201 PISW203 PISW301 PISW30 PISW401 PISW403 a22

PIJ10a22
a23
PIJ10a23
c22
PIJ10c22
c23
PIJ10c23
a24
PIJ10a24
c24
PIJ10c24
a25 c25
GND GND GND GND PORC3
RC3 PIJ10a25 PIJ10c25 PORC2
RC2
a26 c26
PORC1
RC1 PIJ10a26 PIJ10c26 PORC0
RC0
+5 a27
PIJ10a27
c27
PIJ10c27
+5
a28
PIJ10a28
c28
PIJ10c28
a29
PIJ10a29
c29
PIJ10c29
a30
PIJ10a30
c30
PIJ10c30
a31
PIJ10a31
c31
PIJ10c31
a32
PIJ10a32
c32
PIJ10c32

09 73 264 2804

GND GND

D D

Title Organization
Eurocard VME 3U (3.937 x 6.299 inches)
Address1
Address2
Size: A4 Number:1 Revision:0
Address3
Date: 12/11/2016 Time: 21:28:22 Sheet 2 of 2 Address4
File: C:\Users\ASC\Documents\design altium\SWD LKS PCB\task lks\Eurocard VME 3U (3.937 x 6.299 inches).schdoc
1 2 3 4
 1 2 3 4 5 6 7 8

VCC POWER REGULATOR +5V

DOWNLOADER
PIR102 COD1
D1 +12
COR1
R1
A
PID101 PID102 PO012V
+12V COU1 LM7805 A
+12 U1 +5
PIR101 1K Diode 1N4001 PIC102 PIC201 1
PIU101 IN OUT
3
PIU103 PO05V
+5V
COP1
P1 COC1
C1 COC2
C2
1 PIP101
PIC101 Cap PIC202 Cap2 GND
PID201 PID301 2 PIP102
100nF 10uF
PIU102 PIC301 PIC402
PIC501

2
COC3
C3 COC4
C4
COD2 COD3 PIP103
D2 D3 3 COC5
C5 PIC302 PIC401
100uF 100nF
COU2
U2 PID202 PID302 PIC502 100uF
COJ1
J1 GND PIC602 COC6
PIC701 COC7 GND
MOSI 12 23 C6 C7
6 PIJ106NLGND PIU2012
PB0 (ICP) PC0 (ADC0) PIU2023 COP2 COD4
D4 PIC601 Cap PIC702 Cap2
GND 13 24 P2
5 PIJ105NLRESET PIU2013 PB1 (OC1A) PC1 (ADC1) PIU2024 100nF 10uF
RESET RESETPIU2014
14 25 POGND
4 PIJ104 NLMOSI PB2 (SS/OC1B) PC2 (ADC2) PIU2025 PIP201 1 PID402 PID401 -12V GND
PIJ103SCK MOSI PIU2015
15 26
PIU2026 PIP202 2
3 NLMISO PB3 (MOSI/OC2) PC3 (ADC3)
MISO VCC MISO PIU2016
16 27 Diode 1N4001 -12
2 PIJ102NLVCC NLSCK PB4 (MISO) PC4 (ADC4/SDA) PIU2027 PIP203 3
VCC SCK PIU2017
17 28 GND
1 PIJ101 PB5 (SCK) PC5 (ADC5/SCL) PIU2028
PIR201 NLX3
X3 PIU207
7
PB6 (XTAL1/TOSC1) ADC6
19
PIU2019 GND
COR2
R2 NLX4
X4 PIU208
8 22
PB7 (XTAL2/TOSC2) ADC7 PIU2022
VCC
COJ2
J2 PIR202 1K2 COR3
R3 30 29 J1 RESET
PIR302 PIR301 PIU2030 PD0 (RXD) PC6 (RESET) PIU2029 PIJ101 PIJ102
VCC
1 68 31 10K +5 +12 -12
VBUS PIJ201 PIU2031 PD1 (TXD)
2
D- PIJ202
3
COR4
R4
PIR402 PIR401 32
PIU2032
1
PD2 (INT0)
6
VCC PIU206
4
AVR KIT
PIJ205 D+ PIJ203 68 PIU201 PD3 (INT1) VCC PIU204
PIJ206
4
GND PIJ204
2
PIU202 PD4 (XCK/T0)
18
AVCC PIU2018 1 2
PIR501 PIR701 PIR801
787780-1 PID502 COD5
D5
PID602 COD6
D6
9
PIU209 PD5 (T1)
10
PIU2010 PD6 (AIN0)
20
AREF PIU2020
PO012V
+12V PIP401
3
PIP402

4
+12V COR5
R5
470
COR7
R7
1K
COR8
R8
1K
GND
ZENER ZENER
11
PIU2011 PD7 (AIN1)
21
GND PIU2021
POGND
GND PIP403 PIP404 GND PIR502 PIR702 PIR802

B
PID501 PID601 5
GND PIU205
3
GND PIU203
5
PIP405
6
PIP406
B
GND
COX1
X1 RB7
7
PIP407 8
PIP408 RB6 PID801 PID901 PID702 D7
COD7
ATmega8L-8ACPIX102
X4
COD8
D8 COD9
D9
PIX101X3 GND 9 10
PIC802 PIC902 RB5 PIP409 PIP4010 RB4 PID802 PID902 PID701
GND COC8
C8 X1 COC9
C9
11 12
PIC801 PIC901 +5 COP3
P3
RB3 PIP4011 PIP4012 RB2
22pF 22pF
VCC 13 14
PIP301 1 RB1 PIP4013 PIP4014 RB0 GND GND GND
PIP302 2 15 16
PIP303 3 GND PIP4015 PIP4016 GND
GND
17
PIP4017
18
PIP4018

19 20 COP6
P6
RD7 PIP4019 PIP4020 RD6 COP5
P5
MINIMUM SISTEM 21 22 RA0 PIP501 1 2 PIP502PORA0
RA0 RB0 PIP601 1 2 PIP602PORB0
RB0
RD5 PIP4021 PIP4022 RD4 RB1 PIP603 3 4 PIP604PORB1
RB1
COU3 RA1 PIP503 3 4 PIP504PORA1
RA1
U3
23 24 RA2 PIP505 5 6 PIP506PORA2
RA2 RB2 PIP605 5 6 PIP606PORB2
RB2
40 22 RD3 PIP4023 PIP4024 RD2 8 PIP608PORB3
PORA0
RA0 PIU3040 PA0 (ADC0)
39
PC0 (SCL) PIU3022
23
PORC0
RC0 RA3 PIP507 7 8 PIP508PORA3
RA3 RB3 PIP607 7 RB3
PORA1
RA1 PIU3039 PA1 (ADC1) PC1 (SDA) PIU3023 PORC1
RC1 25 26 RA4 PIP509 9 10 PIP5010PORA4
RA4 RB4 PIP609 9 10 PIP6010PORB4
RB4
PORA2 38 24 PORC2 RD1 PIP4025 PIP4026 RD0 RB5 PIP6011 11 12 PIP6012PORB5
RB5
RA2 PIU3038 PA2 (ADC2) PC2 (TCK) PIU3024 RC2 RA5 PIP5011 11 12 PIP5012PORA5
RA5
PORA3 37 25 PORC3
RA3 PIU3037 PA3 (ADC3) PC3 (TMS) PIU3025 RC3 27 28 RA6 PIP5013 13 14 PIP5014PORA6
RA6 RB6 PIP6013 13 14 PIP6014PORB6
RB6
PORA4 36 26 PORC4 GND PIP4027 PIP4028 GND 16 PIP6016PORB7
RA4 PIU3036 PA4 (ADC4) PC4 (TDO) PIU3026 RC4 RA7 PIP5015 15 16 PIP5016PORA7
RA7 RB7 PIP6015 15 RB7
PORA5 35 27 PORC5
RA5 PIU3035 PA5 (ADC5) PC5 (TDI) PIU3027 RC5 29 30 Header 8X2
PORA6 34 28 PORC6 PIP4029 PIP4030 Header 8X2
RA6 PIU3034 PA6 (ADC6) PC6 (TOSC1) PIU3028 RC6
33 29
PORA7
RA7 PIU3033 PA7 (ADC7) PC7 (TOSC2) PIU3029 PORC7
RC7
RA7
31
PIP4031
32
PIP4032 RA6
PORB0 1 14 PORD0
RB0 PIU301 PB0 (XCK/T0) PD0 (RXD) PIU3014 RD0 33 34
C PORB1 2 15 PORD1 RA5 PIP4033 PIP4034 RA4 C
RB1 PIU302 PB1 (T1) PD1 (TXD) PIU3015 RD1
3 16
PORB2
RB2 PIU303
4
PB2 (INT2/AIN0) PD2 (INT0) PIU3016
17
PORD2
RD2
RA3
35
PIP4035
36
PIP4036 RA2
PORB3
RB3 PIU304 PB3 (OC0/AIN1) PD3 (INT1) PIU3017 PORD3
RD3
PORB4 5 18 PORD4 POPWM1
RB4 PIU305 PB4 (SS) PD4 (OC1B) PIU3018 RD4 PWM1 37 38
MOSI PIU306
6 19 RA1 PIP4037 PIP4038 RA0 COP7
P7
PORB5
RB5
MISO PIU307
7
PB5 (MOSI) PD5 (OC1A) PIU3019
20
PORD5
RD5 POPWM0
PWM0 COP8
P8
RB6
PORB6 PB6 (MISO) PD6 (ICP1) PIU3020 RD6
PORD6 39 40 RD0 PIP701 1 2 PIP702PORD0
RD0
PORB7 SCK PIU308
8 21 PORD7 GND PIP4039 PIP4040 GND
RB7 PB7 (SCK) PD7 (OC2) PIU3021 RD7 RD1 PIP703 3 4 PIP704PORD1
RD1 RC0 PIP801 1 2 PIP802PORC0
RC0
+5
41 42 RD2 PIP705 5 6 PIP706PORD2
RD2 RC1 PIP803 3 4 PIP804PORC1
RC1
NLX1
X1 13 10 RC7 PIP4041 PIP4042 RC6
PIU3013 XTAL1
NLX2 VCC PIU3010
RD3 PIP707 7 8 PIP708PORD3
RD3 RC2 PIP805 5 6 PIP806PORC2
RC2
X2PIU3012
12 30
XTAL2 AVCC PIU3030 AVCC
POAVCC 43 44 RD4 PIP709 9 10 PIP7010PORD4
RD4 RC3 PIP807 7 8 PIP808PORC3
RC3
AREF
32
PIU3032
POPWM1
PWM1 PIP4043 PIP4044POPWM0
PWM0
RC4 PIP809 9 10 PIP8010PORC4
RC4
RESETPIU309
9 RD5 PIP7011 11 12 PIP7012PORD5
RD5
RESET 45 46 RD6 PIP7013 13 14 PIP7014PORD6
RD6 RC5 PIP8011 11 12 PIP8012PORC5
RC5
11 GND PIP4045 PIP4046 GND
GND PIU3011 15 16 PIP7016PORD7 RC6 PIP8013 13 14 PIP8014PORC6
RC6
31
GND PIU3031 PIC10 2 COC10 47 48
RD7 PIP7015 RD7
RC7 PIP8015 15 16 PIP8016PORC7
RC7
C10 RC5 PIP4047 PIP4048 RC4 Header 8X2
ATmega16-16PU PIC10 1 100nF
49 50
Header 8X2
GND RC3 PIP4049 PIP4050 RC2
+5
51 52
GND RC1 PIP4051 PIP4052 RC0
53 54
PIR601 GND PIP4053 PIP4054 GND
COR6
R6
55 56
10K COX2
X2 PO05V
+5V PIP4055 PIP4056 +5V
PIR602 RESET X2
PIX202 PIX201
X1
L1
COL1
+5
57 58
PIS10 PIC1 02 COC11
PIC1202 COC12 POAVCC
AVCC PIL101 PIL102
PIP4057 PIP4058
C11 xtal C12 Inductor
COS1 59 60
S1 PIC1 01 PIC1201 100uH PIP4059 PIP4060
SW-PB 22pF 22pF
61 62
D PIC1302 COC13
GND PIP4061 PIP4062 GND D
C13
PIS102 PIC1301 100nF PO012V 63
-12V PIP4063
64
PIP4064 -12V
GND
COP4
P4
GND GND
*
Title AVR CARD *
*
Size: A3 Number:* Revision:*
*
Date: 29/11/2016 Time: 17:49:42 Sheet * of * *
File: C:\Users\ASC\Documents\design altium\SWD LKS PCB\Minimum Sistem LKS Nasional.SchDoc
1 2 3 4 5 6 7 8
COP4 PAP40
PAP4063 PAP4061 PAP4059 PAP4057 PAP4055 PAP4053 PAP4051 PAP4049 PAP4047 PAP4045 PAP4043 PAP4041 PAP4039 PAP4037 PAP4035 PAP4033 PAP4031 PAP4029 PAP4027 PAP4025 PAP4023 PAP4021 PAP4019 PAP4017 PAP4015 PAP4013 PAP401 PAP409 PAP407 PAP405 PAP403 PAP401

PAP4064 PAP4062 PAP4060 PAP4058 PAP4056 PAP4054 PAP4052 PAP4050 PAP4048 PAP4046 PAP4044 PAP4042 PAP4040 PAP4038 PAP4036 PAP4034 PAP4032 PAP4030 PAP4028 PAP4026 PAP4024 PAP4022 PAP4020 PAP4018 PAP4016 PAP4014 PAP4012 PAP4010 PAP408 PAP406 PAP404 PAP402

COP8 COP5 COP7 COP6

PAP802 PAP804 PAP806 PAP808 PAP8010 PAP8012 PAP8014 PAP8016 PAP502 PAP504 PAP506 PAP508 PAP5010 PAP5012 PAP5014 PAP5016 PAP702 PAP704 PAP706 PAP708 PAP7010 PAP7012 PAP7014 PAP7016 PAP602 PAP604 PAP606 PAP608 PAP6010 PAP6012 PAP6014 PAP6016
PAP801 PAP803 PAP805 PAP807 PAP809 PAP8011 PAP8013 PAP8015 PAP501 PAP503 PAP505 PAP507 PAP509 PAP5011 PAP5013 PAP5015 PAP701 PAP703 PAP705 PAP707 PAP709 PAP7011 PAP7013 PAP7015 PAP601 PAP603 PAP605 PAP607 PAP609 PAP6011 PAP6013 PAP6015

COR7 COD9
PAR701 PAR702 PAD901 PAD902
COU3
COR8 COD7 PAU3020 PAU3019 PAU3018 PAU3017 PAU3016 PAU3015 PAU3014 PAU3013 PAU3012 PAU3011 PAU3010 PAU309 PAU308 PAU307 PAU306 PAU305 PAU304 PAU303 PAU302 PAU301
PAR802 PAR801 PAD701 PAD702

COR5 COD8
PAR501 PAR502 PAD801 PAD802

PAU103 PAU3021 PAU3022 PAU3023 PAU3024 PAU3025 PAU3026 PAU3027 PAU3028 PAU3029 PAU3030 PAU3031 PAU3032 PAU3033 PAU3034 PAU3035 PAU3036 PAU3037 PAU3038 PAU3039 PAU3040
PAU102
PAU101 COX2 COC8 COC9
COC13 COC10 PAC802 PAC801 PAC901 PAC902
COX6 PAX201 PAX202
COU1 COC2 COC3 COC4 PAC402PAC401 PAC1301 PAC1002

PAC201 PAC202 PAC301 PAC302

PAC1302 PAC1001 COX1 PAX102 PAX101 COJ1
PAL101 PAJ102
PAC1202 PAC1201 PAC1102 PAC1101 COL1 PAL102 PAU208 PAU207PAU206 PAU205 PAU204 PAU203PAU202 PAU201
COC12 COC11
COU2 PAU209 PAU2032
PAJ101
COC5 COC7 PAU2010
PAU2011
PAU2012
PAU2013
PAU2031
PAU2030
PAU2029
PAU2028

PAC501 PAC502 PAC701 PAC702 PAU2014 PAU2027

PAU2015
PAU2016

PAU2017 PAU2018PAU2019 PAU20 PAU20 1 PAU202 PAU2023 PAU20 4

PAU2026
PAU2025
COD2 COD3 COR1
COC1 COC6 PAD202 PAD302 PAR101
PAC102 PAC101 PAC602 PAC601 PAD201 PAD301 PAR102

PAD402
COD1 COD4 PAD401 COR6 PAR601
PAR602 COP2 PAP203 PAP202 PAP201 COR4 COD6 COD5 COR3 COR2
PAR401 PAD601 PAD501 PAR301 PAR201
PAJ202 PAJ201
PAD102 PAD101 PAR402 PAD602 PAD502 PAR302 PAR202 PAJ203 PAJ204

COP1 PAS101 PAJ206 PAJ205

PAP103 PAP102 PAP101 PAJ101 PAJ102 PAJ103 PAJ104 PAJ105 PAJ106
PAS102 COP3 PAP303 PAP302 PAP301
COS1 COJ2
 Hardware Design

Test Project document

LKS_2017_TP16_XXV_HD_EN

Submitted by:
Name : ASC WSC Team
Member : Ina skills Electronics
Type : Close Project
Time : 6 Hours
Test Project for skill 16 Version:1.0 1 of 12
LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
Point : 25 Points
Contents
This Test Project proposal consists of the following documentation and files:
1. LKS_2017_TP16_XXV_EN.doc

Introduction
This Hardware Design Project will access each competitor’s skill and capacity.
1. Competitor can design a circuit of product based on the given drawing and instruction.
2. Competitor can design Printed Circuit Board using Altium Designer CAD tool.
3. Competitor can complete his product with enough functions.

Description of project and tasks

a. Circuit Design and Schematic Capture (Time limit: 2 hrs, 1st day)
You are to complete 4 designs. Please complete the designs according to the
requirements. Use only components from the parts list for your designs. You may not
need all the components in the parts list.
Competitors can’t use simulation tool.
Competitors can read component data sheet that is provided with only personal
computer which contains Data sheet pack. The data sheet pack should be provided
by Committee. The hard copies brought by competitor can’t be used, but competitors
can read the hard copies provided with committee. When you have completed your
designs you are to submit your answers on the provided Answer Sheets to the expert.
You cannot do this until the 1st hour has passed. You will then be given the schematic
solution for schematic entry into Altium. You cannot start your PCB design in this
phase of the test project.

b. Design of Printed Circuit Board (Time limit: 2 hrs)

 Design printed circuit board of PCB using Altium Designer CAD tool.
 Complete the designs, save PCB Gerber file in the Network Drive
 Please use track widths of 0.4 mm minimum for signal and 0.7 mm minimum for power
and a clearance of 0.3mm minimum
 Minimum pad size
 Type Ukuran pada Pad Ukuran Lubang Bor
IC DIP 1.5 mm 0.8mm
Resistor 1.8 mm 0.8mm
Cap non Polar 1.8 mm 0.8mm

Test Project for skill 16 Version:1.0 2 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 Header T Block 2 mm 1.2 mm
 Board dimension of 100 x 160 +/- 0.2mm is to be used
 You are to place the components following request jury

c. Build and Test Hardware design project (Time limit: 2.0 Hr)
 Assemble PCB, and check its operation.
 Completing the project, submit all the product and documents.

Instructions to the competitor

The task in this project is to design and make an electronic thermometer using the
integrated circuit LM234 to run and control the speed of a motor, which can be used as a
cooling system of any devices. Below 40ºC the motor is off, when the temperature exceeds
40ºC the motor starts running. As the temperature rises the speed of the motor increases.
Buzzer on if temperature more then 100ºC. Moreover, the temperature is to be shown by a
LED indicator and seven segment (from 0ºC to 100ºC).

Figure 1. Block diagram for Electronic thermometer

Test Project for skill 16 Version:1.0 3 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
Parts List

No. Qty. Value / Tipe Part Information

1 1 R. 68 Ohm Resistor ¼ W 1%
2 11 R. 220 Ohm Resistor ¼ W 1%
3 7 R. 330 Ohm Resistor ¼ W 1%
4 12 R. 1K Ohm Resistor ¼ W 1%
5 1 R. 10K Ohm Resistor ¼ W 1%
6 2 R. 12K Ohm Resistor ¼ W 1%
7 1 R. 15K Ohm Resistor ¼ W 1%
8 1 R. 18K Ohm Resistor ¼ W 1%
9 2 R. 20K Ohm Resistor ¼ W 1%
10 10 C. 100 nF Capasitor MKM
11 1 C. 4,7 uF Capasitor Electrolit
12 1 C. 6,8 uF Capasitor Electrolit
13 1 C. 10 uF Capasitor Electrolit
14 2 C. 100 uF Capasitor Electrolit
15 1 D. 1N4007 Dioda 1 Ampere
16 1 Tr. C9013 Transistor NPN
17 1 Tr. TIP 41C Transistor NPN
18 10 Led. Red 3mm Led Red 3mm
19 1 Led. Green 3mm Led Green 3mm
20 1 Ds. 7 Seg. 41056 Seven Segment CA 0,56”
21 1 Ic. Ne 555 IC Pulse Generator
22 1 Ic. SN 74LS04 IC Gate Not
23 2 Ic. SN 74LS08 IC Gate And
24 1 Ic. SN 74LS42 IC Logic Decoder Demux
25 1 Ic. SN 74LS47 IC Logic Decoder BCD
26 1 Ic. SN 74LS147 IC Logic Encoder
27 1 Ic. L 7805 IC Regulator 5 V
28 3 Ic. LM 324 IC Op-Amp
29 1 Ic. LM 35 IC Temperatur Sensor
30 3 Soket IC 16 Pin Soket IC
31 6 Soket IC 14 Pin Soket IC
32 1 Soket IC 8 Pin Soket IC
33 1 Buzzer 5 V Buzzer 5 V
34 1 Fan 12Vdc Fan 12V 8x8cm
35 1 Soket Molek 2 Pin Soket Molek
36 1 Header Molek 2 Pin Header Molek
37 1 Terminal Block 2 Pin Terminal Block

38 20 Cm Wire Red Awg 22 Wire Red Awg 22

Test Project for skill 16 Version:1.0 4 of 12
LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 No. Qty. Value / Tipe Part Information
39 20 Cm Wire Black Awg 22 Wire Black Awg 22
40 100 Cm Lead 0,8 mm Lead 0,8 mm
41 4 Spiser 1 Cm Hexagonal Spiser 1 Cm Hexagonal
42 1 PCB 16x10 Cm Plain PCB 16x10 cm Plain
43 1 PCB 16x10 Cm Finished PCB 16x10 cm Finished

Test Project for skill 16 Version:1.0 5 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
OTHERS

Answer Sheet
Competitor Code Competitor Table No. Approval by Jury

ASSIGNED NO. / CODE

To be written by Juri for

Marking purpose

Test Project for skill 16 Version:1.0 6 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 #DESIGN 1
Complete the schematic

Test Project for skill 16 Version:1.0 7 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 #DESIGN 2
Calculate the Resistor and capasitor

Test Project for skill 16 Version:1.0 8 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 #DESIGN 3
Complete the schematic

Test Project for skill 16 Version:1.0 9 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 #DESIGN 4
Complete the schematic

Test Project for skill 16 Version:1.0 10 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 # COMPLETE VIEW OF SCHEMATIC

Test Project for skill 16 Version:1.0 11 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com
 Datasheet on desktop

SELAMAT BERLATIH !!!

Akan dilakukan revisi kisi kisi:
Tolong Selalu Kunjungi : www.inaskills-electronics.com

Test Project for skill 16 Version:1.0 12 of 12

LKS_2017_TP16_XXV_HD_EN Date:20.10.2016 www.inaskills-electronics.com