ZONE 1/21 LED LIGHTING

HDL106NE
Ex e LED Floodlight

The HDL106NE is a distinctive Emergency LED luminaire allowing

up to three modules interlinked, providing an effective and efficient
alternative to traditional battery-backed luminaires.
With a variety of beam options available, and integral battery backup
allowing for either 90 minutes or 3 hours battery duration, this is a
flexible solution for any Emergency or Escape to Sea application.

Mounting Options
MADE IN International Approvals Floodlight. Pendant. Bulkhead. High Bay. Pole/Column. Road Lighting.
BRITAIN

Standard Specification
HDL106NE Ex e LED Floodlight
Ex e mb (Increased Safety, Encapsulation)
Type of Protection
Ex tb (Dust Protected Enclosure)
ATEX Classification Group II Category 2 GD
Area Classification Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14
EU Type Examination Certificate Sira 09ATEX5159X
Certificate
IECEx Certificate of Conformity IECEx SIR 09.0064X
Ex e mb IIC T4 Gb
Coding
Ex tb IIIC T103°C Db
Ambient °C -20 to +50
Enclosure LM6 Aluminium with epoxy powder finish (RAL 7035) and Polycarbonate diffuser
Entry 2 x M20 cable entries
Termination 4 core 4mm² max. conductor with looping
Installation Stirrup mounting bracket
Control Gear Electronic Driver
Colour Temperature (CCT) Refer to Ordering Matrix
Colour Rendering Index (Ra) >70
Maintenance M8 Hex Head and M6 SKT Head
Emergency Duration 90mins (75%) or 3hrs (37.5%)
Ingress Protection IP66/67 to EN 60529
Surge Protection 4kV line to line, 6kV line to earth
Electrical Supply 100-254V AC 50/60Hz

Features
HHI-CHL-OG-HDL106NE-ZONE-1-DATASHEET-SPEC-UK-2023-00936 V6

Highly Energy Efficient Lower power consumption than HID lamps

Instant on crisp white light output Lightweight (9kg per module) lighting solution
Modular design allowing up to three interlinked >150,000 maintenance free hours at 25°C (L70)
luminaires, each providing a delivered output > 5500lm

Contact Hubbell T: +44 (0)141 882 5555 E: [email protected]

www.hubbell.com/chalmit
HDL106NE ZONE 1/21

HDL106N
Version¹ Beam Pattern² Light (CCT) Cable Entries Material & Paint Options

E – EM (48 LEDs) [62W] N – Narrow (6565lm) 04 – LM6 Aluminium FG – Glass front cover³
ES – EM/Std (96 LEDs) [113W] M – Medium (5882lm) RAL 7035 (Grey)
BNI – Batteries Not
Included⁴
EE – EM/EM (96 LEDs) [122W] W – Wide (5624lm)
RCG – Rapid
SES – Std/EM/Std (144 LEDs) [165W] X – Extra Wide (5547lm) 0 – M20 Connection Gland for
ESE – EM/Std/EM (144 LEDs) [174W] 5 – M25 single entry⁵
EEE – EM/EM/EM (144 LEDs) [184W] W – Cool White (5000K) 0BP- M20 Brass Nickel Plated Plugs RCGL – Rapid
Connection Glands
X – Warm White (3000K) 5BP- M25 Brass Nickel Plated Plugs for looping⁵
¹ Power consumption provided in square brackets
² Delivered outputs based on single module 48LED version
³ Standard Cover Front Clear Polycarbonate (No Abbreviation required)
⁴ Battery assembly HDLAL11131S to be ordered separately when required by site. Qty 1 HDLAL11131S assembly per emergency unit
e.g. HDL106NESE*** requires Qty 2 HDLAL11131S.
⁵ Factory fitted with 4pin Rapid Connection Gland entry only. Purchaser to supply appropriately sized RCG body as determined by
site specific cable requirement.
Typical ordering reference: HDL106NESMW004FG

Single unit (48 LEDs)

250 205
180

306

175

50 50 30

100

265 3 fixing holes 09

Product design and specifications are subject to change without notice. Please check the Chalmit website for latest specifications.
www.hubbell.com/chalmit
ZONE 1/21 LED LIGHTING

Double unit (96 LEDs)

386 203
252

380

215
50 50
30

300

418

5 fixing holes 013

Triple unit (144 LEDs)

590

203
252

380

215

50 50

100 30

300

500
7 fixing holes 013
621

Contact Hubbell T: +44 (0)141 882 5555 E: [email protected]

www.hubbell.com/chalmit