S05 METALLIC PUMP

TECHNICAL DATA SHEET

SERIES
STANDARD DUTY BALL VALVE PUMPS
Offering the widest range of performance and application capabilities

PERFORMANCE

SUCTION / DISCHARGE PORT SIZE AIR DISTRIBUTION VALVE MAXIMUM OPERATING PRESSURE
• 1/2” NPT (Internal) or 1/2” BSP (Tapered) • No-lube, no-stall design • 125 psi (8.6 bar) metallic center
• 1/2” Raised Face #150 ANSI Flanges - • 100 psi (7 bar) non-metallic center
Stainless Steel ONLY SOLIDS-HANDLING
• Up to .125 in. (3mm) DISPLACEMENT/STROKE
CAPACITY • .026 Gallon / .098 liter
• 0 to 15 gallons per minute (0 to 56 LPM) HEADS UP TO
• 125 psi or 289 ft. of water WEIGHTS
(8.6 bar or 86 meters) • Aluminum 15 lbs. (7kg)
• Stainless Steel 21 lbs. (10kg)
BAR

PSI

2 (4)
4 (7) 6 (10) 8 (14) Performance based on water at ambient temperature.
7 100
100 P 10 (17) AIR CONSUMPTION IN SCFM
SI (6.8 AIR PRESSURE IN PSI
Bar) 12 (20)
6 14 (24)
80
80 PSI 16 (27)
(5.44 B
5 ar)

NPSHR
18 (30)
60
HEAD

4 60 PSI
(4.08 Ba 20 (34)
r)

Meters
3
40

Feet
40 PS
I (2.72
Bar)
2 30 9.1
25 7.6
20 20 6
20 PSI
1 (1.36 B 15 4.5
ar) Air
Inlet Pre 10 3
ssure
5 1.5
0
0 2 4 6 8 10 12 14 16 GPM

0 10 20 30 40 50 60 LPM

CAPACITY

5 YEAR LIMITED PRODUCT WARRANTY USE ONLY GENUINE SANDPIPER PARTS

EX
CLUSIVE
5 Year Guarantee for defects in material or workmanship. See All certification, standards, guarantees & warranties
FE
sandpiperpump.com/content/warranty-certifications originally supplied with this pump will be invalidated by the use of
AT U R E
for complete warranty, including terms and conditions, limitations service parts not identified as “Genuine
and exclusions. SANDPIPER Parts.”

Warren Rupp, Inc. • A Unit of IDEX Corporation

II 2G EEx m c T5
800 N. Main St., Mansfield, Ohio 44902 USA
II 2D c IP65 T100°C ISO 9001 Certified
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 ISO 14001 Certified
 ENCAPSULATED MUFFLER:
3/8 NPT AIR EXHAUST PORT FOR
OPTIONAL PIPING MUFFLER
STYLES OR PIPING EXHAUST AIR

DIMENSIONS
IN SUBMERGED APPLICATIONS
11.47
291

SUCTION PORT

S05 Metallic - Aluminum Model NPT/BSP

1/2 NPT (INTERNAL)

Dimensions in inches (mm dimensions in brackets). Dimensional Tolerance:±1/8" (± 3mm)

The dimensions on this drawing are for reference only. A certified drawing can be requested if physical dimensions are needed. 1.32
DISCHARGE PORT 34
1/2 NPT
B
3.08
A
78
10.27 1.75
261 44
4X .31 MTG. HOLE BOTH SUCTION A
DISCHARGE PORT PORTS ARE A
8 1/2" B
OPTIONAL POSITION

ENCAPSULATED MUFFLER:
3/8 NPT AIR EXHAUST PORT FOR
OPTIONAL PIPING MUFFLER 5.50
STYLES OR PIPING EXHAUST AIR 140
IN SUBMERGED APPLICATIONS AIR INLET 6.75
1/4" NPT 171
11.47
291
9.72
247

6.75
SUCTION PORT 11.50
1/2 NPT (INTERNAL) 171 (STAINLESS STEEL)
292
5.75
7.20 146
183 10.28
(ALLOY C)
DISCHARGE PORT (OPTIONAL) 261
1.32 1/2" NPT (STAINLESS STEEL ONLY)
.25
34
6
1.75 INTEGRAL MUFFLER (S
44 3/8 NPT AIR EXHAUST PORT
OPTIONAL PIPING MUFFLER
PIPING EXHAUST AIR IN SUB
APPLICATIONS

BOTH SUCTION AND DISCHARGE

S05 Metallic - Stainless Steel NPT/BSP

4X .31 MTG. HOLE 10.54
PORTS ARE AVAILABLE IN
8 1/2" BSPT 268
9.89

Dimensions in inches (mm dimensions in brackets). Dimensional Tolerance:±1/8" (± 3mm) 251

The dimensions on this drawing are for reference only. A certified drawing can be requested if physical dimensions areMODEL
needed. S05
5.50
140
Aluminum SUCTION PORT (
1/2" NPT (STAINLES
6.75
11.50
292
171
(STAINLESS STEEL) B
DIMENSIONAL TOLERANCE .13 [3]
5.75 3.08
AMUFFLER OPTION DIM "A" DIM "B"
146 78
10.28 INTEGRAL
1.75 MUFFLER 4.37 [111] 7.49 [190]
DISCHARGE PORT (OPTIONAL) (ALLOY C) DISCHARGE PORT 1.42
261 44 1/2"[142]
NPT
1/2" NPT (STAINLESS STEEL ONLY) METAL MUFFLER (ATEX) 5.60 8.72 [222] 36
SUCTION PORT
1/2" NPT
8.44
INTEGRAL MUFFLER (SHOWN):
3/8 NPT AIR EXHAUST PORT FOR 214
7.20 OPTIONAL PIPING MUFFLER STYLES OR .38 MTG HOLE
PIPING EXHAUST AIR IN SUBMERGED 10
183 APPLICATIONS

AIR INLET
1/4" NPT 10.26
10.54
261
268
9.89
251 9.79 6.12
249 5.50
155
140
5.60
SUCTION PORT (OPTIONAL) 142
1/2" NPT (STAINLESS STEEL ONLY)

7.19
1.42 183
36 11.54
SUCTION PORT 293 10.48
1/2" NPT 9.79 266
8.44
249
214
.38 MTG HOLE
10

MODEL S05
S05 Metallic - Stainless Steel ANSI Flange Stainless Steel
DIMENSIONAL TOLERANCE .13 [3]
3/8 NPT
AIR EXHAUST

Dimensions in inches (mm dimensions in brackets). Dimensional Tolerance:±1/8" (± 3mm) .34

The dimensions on this drawing
6.12
155
are for reference only. A certified drawing can5.50
be requested if physical dimensions are needed.DIM "A"
MUFFLER OPTION DIM "B" 9 1.25
140 2.00 32
INTEGRAL MUFFLER 4.37 [111] 7.49 [190]
51
METAL MUFFLER (ATEX) .385.60 [142] 8.72 [222]
10.26 10 DISCHARGE PORT 9.19
261 3.08 1/2" RF ANSI (#150) FLANGE 233
78 4X .62 [16] HOLES EQ. SPACED
ON A 2.38 [60] BOLT CIRCLE
3.78
7.19 96
7.19
183 183 4X .38 MTG. HOLE
10

AIR INLET
1/4" NPT
12.54
9.79 319
11.54
293 10.48 249
266 8.75 5.50 7.75
9.79
222 140 197
249

5.60
1.42 142
36
3/8 NPT
AIR EXHAUST

7.19
.34 183
9 1.25
2.00 3.06
32
51 78
SUCTION PORT
9.19 1/2" RF ANSI (#150) FLANGE
3.78
233 4X .62 [16] HOLES EQ. SPACED
96
ON A 2.38 [60] BOLT CIRCLE
6.12
155
7.19
183 4X .38 MTG. HOLE
10

Warren Rupp, Inc. • A Unit of IDEX Corporation

800 N. Main St., Mansfield, Ohio 44902 USA
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867
8.75 5.50 7.75
222 140 197
 EXPLANATION OF PUMP NOMENCLATURE
Your Model #: S
__ ____ __ __ __ __ __ __ __ __ __ ____
(fill in from pump
nameplate)

Pump Pump Check Design Wetted Diaphragm/ Check Valve Non-Wetted Porting Pump Pump Kit
Brand Size Valve Level Material Check Valve Seat Material Options Style Options Options

Model #: S XX X X X X X X X X X XX
PUMP BRAND Z One Piece PTFE-Nitrile/PTFE 5 Top Dual Porting BSP (Tapered) KIT OPTIONS (CONT.)
S SANDPIPER® 6 Bottom Dual Porting BSP (Tapered) E1. Solenoid Kit with 24VDC
CHECK VALVE SEAT R 1/2” Raised Face #150 ANSI Flange Explosion-Proof Coil
PUMP SIZE A Aluminum with E2. Solenoid Kit with
05 1/2” C Cast Iron Threaded Pipe Connection 24VAC/12VDC Coil
H Alloy C W 1/2” Welded Raised Face #150 ANSI E3. Solenoid Kit with 12VDC
CHECK VALVE TYPE S Stainless Steel
Flanged Manifolds* Explosion-Proof Coil
B Solid Ball T PTFE
E4. Solenoid Kit with 110VAC Coil
W UHMW Polyethylene PUMP STYLE
DESIGN LEVEL E5. Solenoid Kit with 110VAC
S Standard
1 Design Level NON-WETTED MATERIAL OPTIONS Explosion-Proof Coil
A Aluminum PUMP OPTIONS E6. Solenoid Kit with 220VAC Coil
WETTED MATERIAL Y Aluminum With Stainless Steel E7. Solenoid Kit with 220VAC
0 Integral Muffler
A Aluminum hardware 6 Metal Muffler Explosion-Proof Coil
S Stainless Steel Non-Wetted Material Options E8. Solenoid Kit with 110VAC, 50
H Alloy C (cont.) KIT OPTIONS Hz Explosion-Proof Coil
X Unpainted Aluminum C Conductive Polypropylene With 00. None E9. Solenoid Kit with 230VAC, 50
DIAPHRAGM/CHECK VALVE MATERIALS Stainless Steel hardware P0. 10.30VDC Pulse Output Kit Hz Explosion-Proof Coil
B Nitrile/Nitrile P Polypropylene With Stainless P1. Intrinsically-Safe 5.30VDC, SP. Stroke Indicator Pins
C FKM/PTFE Steel hardware 110/120VAC 220/240 VAC A1. Solenoid Kit with 12 VDC
N Neoprene/Neoprene PORTING OPTIONS Pulse Output Kit ATEX Compliant Coil
E EPDM/EPDM N NPT Threads A2. Solenoid Kit with 24 VDC
P2. 110/120 or 220/240VAC
U Polyurethane B BSP (Tapered) Threads ATEX Compliant Coil
Pulse Output Kit
1 Santoprene®/Santoprene® 1 Dual Porting (NPT) A3. Solenoid Kit with 110/120 VAC
2 Top Dual Porting (NPT) E0. Solenoid Kit with 24VDC Coil
2 PTFE-Santoprene®/PTFE 50/60 Hz ATEX Compliant Coil
3 Bottom Dual Porting NPT
MATERIALS
A4. Solenoid Kit with 220/240 VAC
4 Dual Porting BSP (Tapered)
50/60 Hz ATEX Compliant Coil

Material Profile: Operating

Temperatures:
POLYPROPYLENE: A thermoplastic polymer. Moderate tensile
and flex strength. Resists stong acids and alkali. Attacked by
180°F
82°C
32°F
0°C
CAUTION! Operating temperature limitations are as follows: chlorine, fuming nitric acid and other strong oxidizing agents.
Max. Min.
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with 250°F 0°F
CONDUCTIVE ACETAL: Tough, impact resistant, ductile. Good 190°F -20°F
excellent chemical resistance. Excellent for UV applications. 121°C -18°C
abrasion resistance and low friction surface. Generally inert, 88°C -29°C
High tensile strength and impact resistance.
with good chemical resistance except for strong acids and
oxidizing agents. SANTOPRENE®: Injection molded thermoplastic elastomer with 275°F -40°F
no fabric layer. Long mechanical flex life. Excellent abrasion 135°C -40°C
EPDM: Shows very good water and chemical resistance. Has 280°F -40°F
resistance.
poor resistance to oils and solvents, but is fair in ketones and 138°C -40°C
alcohols. UHMW PE: A thermoplastic that is highly resistant to a broad 180°F -35°F
range of chemicals. Exhibits outstanding abrasion and impact 82°C -37°C
FKM (FLUOROCARBON): Shows good resistance to a wide 350°F -40°F
resistance, along with environmental stress-cracking resistance.
range of oils and solvents; especially all aliphatic, aromatic and 177°C -40°C
halogenated hydrocarbons, acids, animal and vegetable oils. URETHANE: Shows good resistance to abrasives. Has poor 150°F 32°F
Hot water or hot aqueous solutions (over 70°F(21°C)) will attack resistance to most solvents and oils. 66°C 0°C
FKM.
VIRGIN PTFE: (PFA/TFE) Chemically inert, virtually impervious. 220°F -35°F
HYTREL®: Good on acids, bases, amines and glycols at room 220°F -20°F Very few chemicals are known to chemically react with PTFE; 104°C -37°C
temperatures only. 104°C -29°C molten alkali metals, turbulent liquid or gaseous fluorine and a few
fluoro-chemicals such as chlorine trifluoride or oxygen difluoride
NEOPRENE: All purpose. Resistance to vegetable oils. Gener- 200°F -10°F
which readily liberate free fluorine at elevated temperatures.
ally not affected by moderate chemicals, fats, greases and 93°C -23°C
many oils and solvents. Generally attacked by strong oxidizing Maximum and Minimum Temperatures are the limits for which these materials can be
acids, ketones, esters and nitro hydrocarbons and chlorinated operated. Temperatures coupled with pressure affect the longevity of diaphragm pump
aromatic hydrocarbons. components. Maximum life should not be expected at the extreme limits of the
temperature ranges.
NITRILE: General purpose, oil-resistant. Shows good solvent, 190°F -10°F
oil, water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
88°C -23°C
Metals:
hydrocarbons and nitro hydrocarbons. ALLOY C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.
NYLON: 6/6 High strength and toughness over a wide tem- 180°F 32°F STAINLESS STEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-
perature range. Moderate to good resistance to fuels, oils and 82°C 0°C sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for
chemicals. general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
II 2G EEx m c T5
II 2D c IP65 T100°C

Warren Rupp, Inc. • A Unit of IDEX Corporation NOTE: See service manual for ATEX details.
800 N. Main St., Mansfield, Ohio 44902 USA
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 SP_DS_TemplateDataSheet_0817