Table Top Universal Testing Machine

Force Tester
MCTSeries

...Clearly a Better Value

http://www.aandd.jp
 Strength you can see!
Easy to operate with precision color touch panel.
General purpose MCT-1150 High performance MCT-2150
Load display resolution: 0.1N Load display resolution: 0.01N

No hassle start up
Compact Automatic calibration on start up means no
waiting around. (Load cell calibration unnecessary)
Space-saving design allows for table
top use〔250(W)×405(D)×711(H)mm〕. High precision load cell included

Use with your favorite jigs

・
・・ Use jigs from companies other than A&D as well.
・・・
・・
・・
・・
・・・ * When using the M6 male screw adapter
・・
・・・
・
・・

Simple
USB connection
・・・
・・・

・・・・・・・・

* Picture shows spring measurement

・・・
・・・

* PC sold separately
・・・

Data capture software included

・・・

Ideal for use in the field

・・・

Supported OS: Windows XP, Vista Business,

・・・

7Pro (32bit version)

Easily adjust digital testing speed USB: Ver 2.0 or higher
・・・

in 1mm/min increments.
・・・

Standard displacement display.

MCT-Logger [Recording software]
・・・
・・・

Real-time graphing.
Calculate and display maximum value
・・・

and displacement.
・・・

Use only the touch Or enter curve data in CSV format.

・・・

panel to operate
・・・
・・・
・・・

Crisp, clear touch panel is easy

to operate.
MSAT-Lite [Data processing software]
Displays operation and processing results.
Performs data analysis and graphing.
Or enter curve data in CSV format.

1
 Easy to operate touch panel

Main screen Manual operation screen

Speed setting input screen Test condition settings screen

Menu/alarm setting screen Cycle test settings

Limit settings

2
 Supports various material tests * Not waterproof

Electronic component tensile

Switch push force test Heat seal peel strength test strength test

Packing container compressive Plastic bottle compressive Packing container puncture

strength test strength test resistance test

Tensile strength test Food packaging puncture test Container seal peeling test

Pudding

Cup ramen

Medicine PTP packaging push force test Syringe resistant test Tablet strength test

Sheet metal bending strength test Safety cover

A safety cover can be installed to prevent samples
from being scattered during measurement.

3
Accessories
Optional jigs

❶ JM-JFM-500N Screw action jaws Maximum load 500N Price for one piece.
An upper and lower jaw are necessary for tensile strength tests.
(Not sold as a bottom/top pair) Face dimensions 19 (w) x 19 (h) mm, opening width 10 mm.
The face side is knurled.

❷ J-C3-1KN-U Load sensitive plates for STA/STB

Maximum load 500N Price for one piece.
For 1KN/500N/50N Ø60mm An upper and lower jaw are necessary for compression tests.

Maximum load 500N Lower fulcrum R2 Upper fulcrum R5.

❸ JM-B-500N R2 Bending test jig Bottom span between 10 and 110 mm.
Maximum load 500N Lower fulcrum R5 Upper fulcrum R5.
JM-B1-500N R5 Bending test jig Bottom span between 10 and 110 mm.

JM-X001-500N Attachment set (Items with ★ included) Maximum load 500N Attachment set.

Maximum load 500N Hook inner diameter 10 mm.

❹ JM-X002-500N ★ Hook The hook opening is 6 mm allowing string-shaped objects with a diameter
of 6 mm or less to be hooked.

❺ JM-X003-500N ★ V groove indenter Maximum load 500N Tip V Groove angle 90°, diameter 10 mm, length 20 mm

❻ JM-X004-500N ★ Load sensitive plate Ø15mm Maximum load 500N Tip diameter 15 mm, height 16 mm

❼ JM-X005-500N ★ Cone indenter Maximum load 500N Tip cone 90°, diameter 10 mm, length 20 mm

Maximum load 500N Tip edge angle 60°, blade width 10 mm,
❽ JM-X006-500N ★ Cone indenter diameter 10 mm, length 20 mm

Maximum load 500N Used to extend hooks and attachments.

❾ JM-X007-500N ★ Extension rod Length 80 mm, M6 female screw 14 mm depth to fix attachment

Maximum load 500N Tip diameter 5 mm, height 20 mm

JM-X008-500N Load sensitive plate Ø5mm Used when compressing small objects.

JM-X009-500N M6 Male screw adapter Maximum load 500N Used to fix M6 female screw jigs or attachments.

JM-X010 Lower adapter Maximum load 500N Used to shift the position of lower jigs.

JM-X011 MCT vice Maximum load 500N Open width max 30 mm.

JM-X012 MCT safety cover Safety cover for preventing scattering of materials. Made of acrylic.

JM-X013 MCT jaw stand for Tensilon jigs Maximum load 500N Jaw stand for use with Tensilon testing jigs. Fixed by pin.

Maximum load 100N Same as pin vice.

JM-X014 Pin Chuck (100N) Grip pin diameter max 3.2 mm.

Maximum load 100N Used for film piercing tests.

JM-CL-100N MCT Puncture Test Jig Comes with 1 needle (Ø1 mm, tip R 0.5mm).

JM-CL-100N-01 Puncture Test Jig replacement needles (10 piece set) Replacement for the above needle Diameter 1 mm, tip R 0.5mm.

Maximum load 250N Small parallel clamping jaw Tip width 2 mm

JM-JXM-250N Pin Chuck (250N) Ideal for peeling tests.

Maximum load 50N Used for container lid seal peel strength measurement.
JM-PZ-50N Container seal peeling test jig Peels at approx. 45°.

❶ ❷ ❸ ❹ ❺ ❻
★ ★ ★

❼ ❽ ❾ 10 11 12 13
★ ★ ★

14 15 16 17 18 19

* Device not included

4
Specifications
Model MCT-1150 General purpose model MCT-2150 High performance model
Table / floor model Table model
Maximum capacity 500N
Crosshead stroke 400mm 370mm
Effective stroke * 1
315mm 285mm
Crosshead speed 10-300mm/min: Within 5% of the set value *2
Crosshead speed setting Digital setting: 1mm/min increments within the above range
Crosshead speed and load capacity Full speed range at maximum capacity
Crosshead return speed Three speed settings: 10, 100, 300mm/min
Load measurement accuracy 500N~50N : ±0.2% F.S
±0.2% F.S 50N~5N : Within 2% of indicator value
5N and lower : Within 0.1N

Load display resolution 0.1N 0.01N (0.1N will display for values over 100N)
Load calibration Auto-zero function (calibration unnecessary)
Displacement display 000.0mm (Min. 0.1mm) 00.00mm (Min 0.01mm : 0.1mm will display for values over 100mm)
Included software MCT-Logger MSAT-Lite
Safety mechanisms 1. Upper and lower displacement stroke limits
2. Overload limit (automatic shutdown when load cell passes 105% of rated capacity)
3. Emergency stop switch

Dimensions (W × D × H) 250 × 405 × 711mm

Weight 17kg 18kg
Power supply AC90~240V 1Ø 50/60Hz
Power consumption 90W
Operating ambient conditions Temperature : 5~40°C Humidity : 20~80%RH
Recommended ambient conditions Temperature : 23±2°C Humidity : 50±10%RH
Standard equipment Instruction manual, 500N capacity load cell, computer software (CD-ROM), USB cable

*1 When using standard screw action jaws *2 Unladen

External dimensions Unit : mm

2-M8 Depth 16
Test center
3-M6 Depth 16
83
104
60

60
63 73
711

136
A
Overhead view
B

104
(Base width)
B
Min 100, Max 500,
MCT-1150
123

Stroke 400mm

Min 100, Max 470,

MCT-2150
250 405 Stroke 370mm

Attention to ●For proper use, read the instruction

Safety! manuals cafully before use
...Clearly a Better Value
3-23-14 Higashi-lkebukuro, Toshima-ku,Tokyo 170-0013 JAPAN
Telephone:[81](3) 5391-6132 Fax:[81](3) 5391-6148 •Appearance and/or specifications subject to change for improvement without notice.
http://www.aandd.jp •Contents of this catalog last updated May 2017.
* MCT-ADCC-02-PR2-17502GP