System 10/11/12 System 100/110/120 Appendix Operation/Programming Manual we Sw =MIERIC i CON GE Fanuc AutomationWARNING. ) may employ hazardous voltoges or might create other conditions that could, through misuse, inattention clack of understancing. result in porsonal injury. oF damage 10 the product or to other equipment ie imperative therefore, thel persone! Invelved in the metollation, maintenance. or use of this preci understarks to oparation OF the product ang! he contents ofthis publeston ‘The product describes in uns pubes “This deeument 6 based on information available ot the time of ts publication Winle efforts have bbeen made to be accurate, he mformation contained neroin dees rot purport to cover all details oF varstions in hardware and software. nor 10 provide for every possisle Contingency in cormec: tion with installaiton, operation. and maintenance. Features may be descrived herein which are "ot present in all hardware ar coftware systems, Nether GE Fanuc Autornatin Gotp. nor ary of its subsidiaries assumes sry obligaton of natice to holders of ths cecument with respact £0 changes subseruentiy made ‘Neither GE Fanuc Automation Corp. nor any of ts eubsciarios makes ony representation oF war ranty, expressed, implied, or statutory with respect to, and none assumes ary responetatty 10> the eccuracy. completeness. suticiency. or Usetulnass af the information coniained herain, No ‘warrantee of merchantabilty of fitness fr purpose shel apply Copyright 1987 GE Fanuc Automation North America Ine 5System 10/11/12 System 100/110/120 Appendix Operation/Programming Manual ‘This manual contains operation information for the following controls: 10 T-A/10 T-F/10 MA LTA TAIL TTE/11 MA MP 12 T-A/12 MA GE Fanuc Automation GFZ-54810E 02‘This manual describes che following products: Name of products Abbrebiation ‘ANU LOT-MODEL A | LOT-A =e = }———_ Lor Fanuc 1oT-MopEL F | 10T-F 10 series FANUC 10M-MODEL A | 10¥%-A | 10M | FaNuc 11T-Moper a | qit-a | UT FANUC ILTI-MODEL A | 1ITT-a t— qr FANUC IITT-MODEL F | L1TT-F 11 series FANUC LIN-MODEL A | 1IMcA —— 1m FANUC 1IM-MODEL F | 11N-F FANUC 12T-MODEL A | 12T-a | 12T a 12 series FANUC 12M-MODEL A | 12M-A | 12 FANUC 100T-MODEL A | 100T-A | 100T : 100 series Fanuc Loom-wovet a |100M-a | 100M FANUC L10T-Mopet a [iioT-a | 110T }— — 110 sertes FANUC 110M-MODEL A }110M-a | 110% FANUC 120T-MopEL a |1207-a | 1207 120 series FANUC 120M-MoDEL A |120¥-A | 120MCONTENTS APPENDIX 1 FUNCTIONS AND TAPE FORNAT LIST APPENDIX 2 RANGE OF COMMAND VALUE ......-+. _ APPENDIX 3 NOMOGRAPHS . : pe iness APPENDIX 4 TAPE JOINING « pee APPENDIX § STATUS WHEN TURWING THE POWER ON, WHEN RESET’ | APPENDIX & PARAMETERS ss ssseesseseeeere ee : 5 1, Parameter Display sess... ann 7 1,1 Displaying parameters other than Pitch Compensation data 1.2. Displaying pitch error compensation data .. 2. ‘Parameter Setting ..... : 2.1 Parameter tape format. 7 2.2 Seteing parameters using parameter tape 2.3 Setting from MDI vsseseeseeseseeses Re 2.4 Setting procedure for digital servo parameters... 3. Parameter Tape Punch sssrsseeresseseeterteses 3.1 Punching all parameters sessseeeeeeeseneee on 3.2 Punching the paraneters except pitch error compensation data . 3.3. Punching pitch error compensation data . i 4, Descriptions of Parameters ...+ 4.1 Parameters Related to Setting (Data number 0000~) 4.2 Timer (Data number 0100v) ecoeenoeD 4.3 Paramecers Kelated to Axis Control (Data number 100%) 4:4 Parameters Related to the Coordinate Syeten (Deta number 120%) «1. nee 7 4.5 Paranetera Related to Feedrate (Data number 1400%) 4.6 Parameters Related to Acceleration/Deceleration Control (Data number 1600v) ae use : 4.7 Parameters Related to Servo (Data number 18000) 4.8 Parameters Related to DI/D0 (Data number 2000) 4.9 Parameters Related to CRT/MDI and EDIT (Data number 2200) 4.10 Parameters Related to Programs (Data number 2400°) ....+ 4.1L Parameters Related to Graphic Display A (Data number 48210) 4:12 Parameters Related to Reader/puncher Interface (Data number 501%) 4.13, Parameters Related to Stroke Limit (Data namber 52000) 4:14 Parameters Related to Pitch Error Compensation (ata number 5420) 4.15 Parameters Related to Inclination Compensation (FiiM, Fi2M) (Data number 5461») 4.16 Parameters Related to Straightnens Gompanaation (LIM, 12H) (Data number 5481%) 4.17 Parameters Kelated to Spindle Control (Data number 4:18 Parameters Related to Tool Offset (Data nusber 6000%) .. 4:19 Parameters Related to Canned Cycle (Data nunber 6200%) . 4:20 Parameters Related to Scaling and Coordinate Rotation @ata number 6400%) : 4.21 Parameters Related to Automatic Corner Override (ata number 610%) 4.22 Parameters Related to Uni-Direetional Poeitioning (Data number 6820°) teense 4,23 Parameters Related to Custom Macro (Data nunber 7000). 4.24 Parameters Related to Program Restart, Block Restart Tool Retrast and Recover 4.25 Parameters Related to Skip Functions 129 131 134 156 162 169 170 173 17% 178 1794.33 4.34 4.35 4.36 4.37 5. Punch! sa 5.2 APPENDIX 7 APPENDIX 8 APPENDIX 9 APPENDIX. 10 APPENDIX U1 APPENDIX 12 APPENDIX 13, Parameters Related to Automatic Tool Offset (10T/IIT/127) and Automatie Tool Length Measurement (10M/I1M/L2™) (Data number 73000) .eeeesees ete Steves sss ASL Parameters Related to Interference Check (Data munber 7605<) ... 184 Parameters Related to Tool Life Management (Data number 7400) .... aoe q 186 Paraneters Related to Software Operator's (Data number 7603.) e ee oe - 187 Parameters Related to Exponencial Funetion interpolation (ata number 7610%) Coen ae 188 Parameters Related to Index Table Indexing Function (Data number 7602%) cence - 190 aneters Kelated to High Speed Operation (ata number 7607) ... ¢ + 192 Paraneters Related to Sequence Number Compatison and Stop ss... 193 Parameters Related to Manual Handle Feed (Data number 7701%) ... 193 Parameters Related to Synchronous/Independent Operation @ata number 7633%) pean Parameters Related to Turrent Axis Control avs 193) @ata number 7500.) ., ees 194 Parameters Related to Service (Date nunber 80000) - 2 196 ing and setting PMC parameter ....... 198 Punching PMC parameter tape 0... 198, Inputting PHC parameters From cape 198 CODES USED IN PROGRAM .... 0... 199 LIST OF INTERNAL CODES OF KANJT AND HIRAGANA ... + 201 G CODE TABLE . 2 206 ERROR CODE TABLE «1... 213 WARNING MESSAGE LIST. 2 20h LIST OF OPERATIONS . 267 LIST OF SPECIFICATIONS 250