Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 26-Dec-23
Design code AISC 360-16

Material
Steel S235, A36
Concrete 4000 psi

1 / 19
Project:
Project no:
Author:

Project item Joint connection

Design
Name Joint connection
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns

β– γ- α- Offset Offset Offset
Forces
Name Cross-section Direction Pitch Rotation ex ey ez
in
[°] [°] [°] [mm] [mm] [mm]
5-
B1 90.0 90.0 0.0 0 0 0 Node
T120x60x4(BoxFl120x(60/60))
B2 6 - L50x5(L50) 20.0 0.0 90.0 0 0 -30 Node
M3 6 - L50x5(L50) 160.0 0.0 0.0 0 -30 0 Node
2-
M4 20.0 0.0 90.0 0 0 35 Node
T50x50x1.5(BoxFl50x(50/50))
2-
M5 160.0 0.0 0.0 0 35 0 Node
T50x50x1.5(BoxFl50x(50/50))
2-
M6 -90.0 0.0 0.0 0 0 0 Node
T50x50x1.5(BoxFl50x(50/50))

2 / 19
Project:
Project no:
Author:

Cross-sections
Name Material
5-
S235
T120x60x4(BoxFl120x(60/60))
6 - L50x5(L50) S235
2-
S235
T50x50x1.5(BoxFl50x(50/50))

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 B2 0.8 0.0 0.0 0.0 0.0 -0.1
M3 0.7 0.0 0.0 0.0 0.1 0.0
M4 0.5 0.0 0.0 0.0 0.0 -0.1
M5 0.4 0.0 0.0 0.0 0.1 0.0
M6 -0.4 0.0 -0.3 0.0 0.1 0.0

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Welds 16.5 < 100% OK
Buckling Not calculated

3 / 19
Project:
Project no:
Author:

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
B1-tfl 1 235.0 4.0 LE1 26.8 0.0 0.0 OK
B1-bfl 1 235.0 4.0 LE1 17.6 0.0 0.0 OK
B1-w 1 235.0 5.0 LE1 24.9 0.0 0.0 OK
B1-w 2 235.0 5.0 LE1 24.7 0.0 0.0 OK
B2-bfl 1 235.0 5.0 LE1 47.5 0.0 0.0 OK
B2-w 1 235.0 5.0 LE1 29.4 0.0 0.0 OK
M3-bfl 1 235.0 5.0 LE1 29.9 0.0 0.0 OK
M3-w 1 235.0 5.0 LE1 47.9 0.0 0.0 OK
M4-tfl 1 235.0 1.5 LE1 39.4 0.0 0.0 OK
M4-bfl 1 235.0 1.5 LE1 22.8 0.0 0.0 OK
M4-w 1 235.0 1.5 LE1 45.5 0.0 0.0 OK
M4-w 2 235.0 1.5 LE1 53.1 0.0 0.0 OK
M5-tfl 1 235.0 1.5 LE1 52.0 0.0 0.0 OK
M5-bfl 1 235.0 1.5 LE1 46.4 0.0 0.0 OK
M5-w 1 235.0 1.5 LE1 16.2 0.0 0.0 OK
M5-w 2 235.0 1.5 LE1 43.9 0.0 0.0 OK
M6-tfl 1 235.0 1.5 LE1 23.2 0.0 0.0 OK
M6-bfl 1 235.0 1.5 LE1 23.1 0.0 0.0 OK
M6-w 1 235.0 1.5 LE1 19.6 0.0 0.0 OK
M6-w 2 235.0 1.5 LE1 20.3 0.0 0.0 OK

Design data
fy εlim
Material
[MPa] [%]
S235 235.0 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

4 / 19
 Project:
Project no:
Author:

Overall check, LE1

Strain check, LE1

5 / 19
 Project:
Project no:
Author:

Equivalent stress, LE1

6 / 19
Project:
Project no:
Author:

Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
B1-w 1 B2-bfl 1 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 1.1 8.3 13.1 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 1.4 8.4 16.5 OK
B1-w 1 B2-w 1 E70xx ◢2.1◣ ◢3.0◣ 50 10 LE1 0.9 6.9 12.6 OK
E70xx ◢2.1◣ ◢3.0◣ 50 10 LE1 0.9 6.9 13.1 OK
B1-w 2 M3-bfl 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 1.0 9.3 10.3 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.9 9.1 9.8 OK
B1-w 2 M3-w 1 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 1.4 8.4 16.2 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 1.1 8.4 12.7 OK
B1-w 1 M4-tfl 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.2 9.1 1.8 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.3 8.6 3.3 OK
B1-w 1 M4-bfl 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.1 9.1 1.2 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.1 8.7 1.4 OK
B1-w 1 M4-w 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.7 8.2 8.7 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.7 8.5 8.0 OK
B1-w 1 M4-w 2 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.7 8.3 8.9 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.9 8.4 10.2 OK
B1-w 2 M5-tfl 1 E70xx ◢2.8◣ ◢4.0◣ 53 11 LE1 0.6 8.4 7.6 OK
E70xx ◢2.8◣ ◢4.0◣ 53 11 LE1 0.8 9.2 8.6 OK
B1-w 2 M5-bfl 1 E70xx ◢2.8◣ ◢4.0◣ 53 11 LE1 0.8 9.2 8.6 OK
E70xx ◢2.8◣ ◢4.0◣ 53 11 LE1 0.6 8.5 7.3 OK
B1-w 2 M5-w 1 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.3 8.6 3.7 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.2 8.4 1.8 OK
B1-w 2 M5-w 2 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.5 8.6 5.5 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.4 8.5 4.5 OK
B1-bfl 1 M6-tfl 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.2 8.8 2.6 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.2 8.3 2.3 OK
B1-bfl 1 M6-bfl 1 E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.3 8.8 3.1 OK
E70xx ◢2.8◣ ◢4.0◣ 50 10 LE1 0.2 9.1 2.5 OK
B1-bfl 1 M6-w 1 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.2 8.6 2.5 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.3 8.2 3.4 OK
B1-bfl 1 M6-w 2 E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.3 8.3 3.3 OK
E70xx ◢2.8◣ ◢4.0◣ 47 9 LE1 0.2 8.6 2.7 OK

7 / 19
 Project:
Project no:
Author:

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Detailed result for B1-w 1 / B2-bfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.3 kN ≥ Fn =
​
1.1 kN

Where:
Fnw = 416.3 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 66.2° – angle of loading measured from the weld longitudinal axis

Awe = 27 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / B2-bfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
1.4 kN

Where:
Fnw = 417.9 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 67.3° – angle of loading measured from the weld longitudinal axis

Awe = 27 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

8 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 1 / B2-w 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
6.9 kN ≥ Fn =
​
0.9 kN

Where:
Fnw = 428.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 76.5° – angle of loading measured from the weld longitudinal axis

Awe = 21 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / B2-w 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
6.9 kN ≥ Fn =
​
0.9 kN

Where:
Fnw = 433.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 84.5° – angle of loading measured from the weld longitudinal axis

Awe = 21 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M3-bfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.3 kN ≥ Fn =
​
1.0 kN

Where:
Fnw = 433.6 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 85.1° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

9 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 2 / M3-bfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.1 kN ≥ Fn =
​
0.9 kN

Where:
Fnw = 428.2 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 76.3° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M3-w 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
1.4 kN

Where:
Fnw = 419.1 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 68.2° – angle of loading measured from the weld longitudinal axis

Awe = 27 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M3-w 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
1.1 kN

Where:
Fnw = 417.9 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 67.3° – angle of loading measured from the weld longitudinal axis

Awe = 27 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

10 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 1 / M4-tfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.1 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 432.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 81.6° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / M4-tfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.6 kN ≥ Fn =
​
0.3 kN

Where:
Fnw = 410.5 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 62.5° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / M4-bfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.1 kN ≥ Fn =
​
0.1 kN

Where:
Fnw = 429.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 77.2° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

11 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 1 / M4-bfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.7 kN ≥ Fn =
​
0.1 kN

Where:
Fnw = 413.6 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 64.4° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / M4-w 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.2 kN ≥ Fn =
​
0.7 kN

Where:
Fnw = 390.1 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 51.6° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / M4-w 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.5 kN ≥ Fn =
​
0.7 kN

Where:
Fnw = 401.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 57.1° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

12 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 1 / M4-w 2 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.3 kN ≥ Fn =
​
0.7 kN

Where:
Fnw = 394.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 53.5° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 1 / M4-w 2 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
0.9 kN

Where:
Fnw = 397.5 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 55.3° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M5-tfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
0.6 kN

Where:
Fnw = 374.9 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 44.7° – angle of loading measured from the weld longitudinal axis

Awe = 30 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

13 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 2 / M5-tfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.2 kN ≥ Fn =
​
0.8 kN

Where:
Fnw = 410.3 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 62.3° – angle of loading measured from the weld longitudinal axis

Awe = 30 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M5-bfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.2 kN ≥ Fn =
​
0.8 kN

Where:
Fnw = 409.9 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 62.1° – angle of loading measured from the weld longitudinal axis

Awe = 30 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M5-bfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.5 kN ≥ Fn =
​
0.6 kN

Where:
Fnw = 376.3 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 45.3° – angle of loading measured from the weld longitudinal axis

Awe = 30 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

14 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 2 / M5-w 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.6 kN ≥ Fn =
​
0.3 kN

Where:
Fnw = 433.6 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 85.1° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M5-w 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.4 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 425.2 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 73.2° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-w 2 / M5-w 2 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.6 kN ≥ Fn =
​
0.5 kN

Where:
Fnw = 434.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 89.8° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

15 / 19
 Project:
Project no:
Author:

Detailed result for B1-w 2 / M5-w 2 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.5 kN ≥ Fn =
​
0.4 kN

Where:
Fnw = 427.6 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 75.6° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-tfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.8 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 420.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 68.8° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-tfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.3 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 394.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 53.7° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

16 / 19
 Project:
Project no:
Author:

Detailed result for B1-bfl 1 / M6-bfl 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.8 kN ≥ Fn =
​
0.3 kN

Where:
Fnw = 418.1 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 67.5° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-bfl 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
9.1 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 434.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 89.9° – angle of loading measured from the weld longitudinal axis

Awe = 28 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-w 1 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.6 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 433.8 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 85.8° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

17 / 19
 Project:
Project no:
Author:

Detailed result for B1-bfl 1 / M6-w 1 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.2 kN ≥ Fn =
​
0.3 kN

Where:
Fnw = 415.4 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 65.6° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-w 2 - 1

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.3 kN ≥ Fn =
​
0.3 kN

Where:
Fnw = 419.5 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 68.5° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Detailed result for B1-bfl 1 / M6-w 2 - 2

Weld resistance check (AISC 360-16: J2-4)

ϕRn = ϕ ⋅ Fnw ⋅ Awe =

​ ​ ​
8.6 kN ≥ Fn =
​
0.2 kN

Where:
Fnw = 434.0 MPa – nominal stress of weld material:
​

Fnw = 0.6 ⋅ FEXX ⋅ (1 + 0.5 ⋅ sin1.5 θ) , where:

​ ​

FEXX = 482.6 MPa – electrode classification number, i.e. minimum specified tensile strength
​

θ = 86.6° – angle of loading measured from the weld longitudinal axis

Awe = 26 mm2 – effective area of weld critical element

​

ϕ = 0.75 – resistance factor for welded connections

Buckling
Buckling analysis was not calculated.

Code settings
18 / 19
Project:
Project no:
Author:

Item Value Unit Reference

Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion
No AISC 360-16: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check Yes
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) No
joints

19 / 19