Scribd
Upload
52 views

Install Linux Debian 11 in VirtualBox

This document provides instructions for installing a Linux Debian 11 server. It outlines steps such as selecting installation options, setting memory size and disk partitioning, configuring the hostname, IP addresses, and DNS. It also describes basic post-installation configuration tasks like editing configuration files to set the TCP/IP settings and enabling IP forwarding.

Uploaded by

datacdngan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
52 views

Install Linux Debian 11 in VirtualBox

This document provides instructions for installing a Linux Debian 11 server. It outlines steps such as selecting installation options, setting memory size and disk partitioning, configuring the hostname, IP addresses, and DNS. It also describes basic post-installation configuration tasks like editing configuration files to set the TCP/IP settings and enabling IP forwarding.

Uploaded by

datacdngan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

Install Server (Linux Debian 11)

Select new (click the red circle)

Set configuration by default or else and then next


Set memory size, then next
Select and save
Ready, and install (Click start)
select iso file location
Wait
Hostname : elsera
Domain : ledy.com
IP Address Internet : 192.168.4.1/26
Gateway Internet : 192.168.4.62
DNS Internet : 192.168.1.62
IP Address Local : 172.16.0.0/30
Select SCSI3 .. .. ..
Then select all files in .. .. ..
Finish partitioning .. .. ..
Select general
Wait, then finish the installation
Wait .. ..
Enter
Lihat daftar aplikasi, buka terminal
Masuk ke root dengan cara ketik ‘su’
Dan masukkan sandi

Setting dan konfigurasi tcp/ip


nano /etc/network/interfaces
Simpan ctrl+o lalu enter dan keluar ctrl+x
nano /etc/resolv.conf

nano /etc/sysctl.conf
Hilangkan tanda # pada { #net.ipv4.ip_forward=1 }
nano /etc/rc.local
Ctrl+o (simpan), enter, ctrl+x (keluar)
nano /etc/init.d/networking restart
ctrl+o, enter, ctrl+x, ketik ‘y’ enter

You might also like