Date: 2/14/2024

Configuration Number: C-2024-832611

Product Configuration Technical Specification Sheet

Basic Product Information
Model Number LHYMS30-4F190B-EPY2-80
BBB Frame Size 4F190
Mounting Style (Y) Hollow Shaft Mount
Output Shaft Orientation (H) Horizontal
Output Shaft Keyed: ∅ 120 mm
Input Configuration (M) Integral Gearmotor

Configuration Rating Information

Nominal Ratio 80
Input / Output RPM 1450 / 18.1
Service Factor 1.5
Input Power 30 HP
Output Torque 10900 N-m

Please see next page for more configuration specific information.

Dimensions shown are for reference only and are subject to change without
notice, unless certified. Certified prints are available after receipt of an
order; consult factory for more information. Image shown is representative
and may not reflect actual unit and/or orientation.

Units: mm Approx. Weight : 803 kg

J E F K Z D E1 F1 Q1 Q2 S1XL G1 G2 H1 LA D3 SXL
Casing
240 252 400 45 70 39 340 320 51 70 M30 x 50 183 238 273 320 370 M24 x 50

Keyed U U TOL V S L1 Q M1 T KEYWAY P

Hollow Bore 120.00 +0.058 / 0 435 124 194 49 4 121 32 7

Integral AB ML DM MS MT N C DC CP CT
Motor 340 230 Ø384 - - 552 1428 430 265 2-M40

Y2 GL GH
Lubrication
Piping 355 512

For worldwide locations, visit sumitomodrive.com/worldwide

©2024 Sumitomo Machinery Corporation of America
All rights reserved
Page 1 of 2
 Date: 2/14/2024
Configuration Number: C-2024-832611

Product Configuration Technical Specification Sheet

Application Information Product Ratings
Hours of Operation per Day 11 - 24 Hrs. Per Day Application or Motor Input Power 29.5 HP
No. of Start/Stop per Hour Continuous (no stop and starts) Service Factor 1.6
Start/Stop Load Factor Not Applicable Calculated Output Torque 10700 N-m
Potential Shock Loading Moderate Shock Load Rated Input RPM 1450
Prime Mover AC-Motor Across-Line Rated Output RPM 18.1
Service Factor Method BBB Reducer Product Rated Input Power 47.2 HP
Recommended SF 1.50 Product Rated Output Torque 17100 N-m
Input Configuration (M) Integral Motor Product Overhung Load Capacity 125000 N
Actual Reduction Ratio 25/1*32/10 = 80.0
Input Configuration
Input Stage Frame Size 619 Reducer Options
Gearmotor Output Shaft Projection Not Applicable
Motor Series IE3 CE Motor Europe Safety Cover Standard
Motor Frame / Type N-180M / TEFC Chemical Duty Option Not Selected
HP x Pole Rating (30) 30HP [22kW] 4P Food & Washdown Options None Selected
Motor Voltage Rating 400V, 50Hz, 3Phase Severe Duty Breather Not Selected
Motor Shaft Direction Vertical - Shaft Down Bulls Eye Oil Gauge Included
Conduit Box Type Global CE Type Drain Valve Not Selected
Inlet Size 2-M40 Magnetic Drain Plug Not Selected
C. Box / Port Direction N33 / N3A Y2 Oil Fill Cup Type Cast Iron Oil Fill Cup
Add Brake No Seal Options Double Nitrile Seal
Paint Specification Standard Danube Blue
Lubrication Specifications Immersion Heater Not Selected
Selected Lubrication Standard Lubrication Immersion Heater Port Location Not Selected
Lubrication Method Oil Bath, Single Oil Sump Stainless Steel Output Shaft Not Applicable
Lubrication Option Oil (NOT Filled) Eccentric Backlash Reduction Not Selected

Environmental Specifications
Installation Location Indoor
Ambient Temperature 14° - 104°F (-10° - 40°C )
Ambient Humidity Under 90%
Environment Standard
Food Grade Required No
Elevation Above Sea Level Under 3300 ft/1000 m

Configuration Messages
Allowable Radial (Overhung) Load - Hollow Shaft
The allowable radial load value is in the position 20 mm (0.79 in) away from the shaft end face.

Recommended Driven Shaft Tolerance - Keyed Hollow Bore

Recommended dimensional tolerance of the driven shaft is as follows:
For uniform load - ISO/JIS/DIN h6 or js6
For shock load, or significant radial load - ISO/JIS/DIN js6 or k6

All Configuration data contained within this technical specification sheet is subject to change. Please refer to Sumitomo Drive Technologies' Terms and
Conditions located at smcyclo.com for further information. For more specific product and/or application data, please contact your Sumitomo Drive
Technologies' Representative.

To request a catalog, or for more information, on any of our high quality products, please visit our website: www.sumitomodrive.com.

Thank you for your interest in Sumitomo products.

For worldwide locations, visit sumitomodrive.com/worldwide

©2024 Sumitomo Machinery Corporation of America
All rights reserved
Page 2 of 2