Scribd
Upload
20 views

Base

This document provides the design of a column base for a proposed residential house in Kiambu, Kenya. It includes specifications for materials, dimensions of the base and column, load reactions, bearing pressure calculations, required reinforcement for bending and shear, and punching shear analysis. The design meets the criteria of BS 8110:1997 and provides valid reinforcement to resist all calculated loads with efficiencies below 100%.

Uploaded by

STEPHEN ODHIAMBO
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Base

This document provides the design of a column base for a proposed residential house in Kiambu, Kenya. It includes specifications for materials, dimensions of the base and column, load reactions, bearing pressure calculations, required reinforcement for bending and shear, and punching shear analysis. The design meets the criteria of BS 8110:1997 and provides valid reinforcement to resist all calculated loads with efficiencies below 100%.

Uploaded by

STEPHEN ODHIAMBO
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

COLUMN

BASES
ANNALYSIS &
DESIGN
REINFORCED CONCRETE
Project Proposed Residential House - Kiambu COUNCIL
Client Mr. Dove Livondo Made by Date Page
Location ADOPT FOR ALL THE BASES Single column Eng. S.A 113
PAD FOUNDATION DESIGN to BS 8110:1997 base Checked Revision Job No
Originated from RCC81.xls v on CD © 1999-2003 BCA for RCC Eng. D.o

MATERIALS fcu 35 N/mm² h agg 20 mm gc 1.5 concrete


fy 460 N/mm² cover 50 mm gs 1.05 steel
Densities - Concrete 24 kN/m³ Soil 18 kN/m³
Bearing pressure 200 kN/m² (net allowable increase)

DIMENSIONS mm
BASE COLUMN
L = 1200 h = 300
B = 1200 b = 250
depth H = 300
ex = 0 ey = 0

COLUMN REACTIONS kN, kNm characteristic Plot (to scale) Key


DEAD IMPOSED WIND
Axial (kN) 150.0 40.0
Mx (kNm) 5.0 5.0
Grnd Brg Pressure 97%
My (kNm) 3.0 3.0
Hx (kN) Bending fsx 63%
Hy (kN)
(As/Asprov) fsy 58%

STATUS VALID DESIGN Shear v xx 23%

v yy 26%

BEARING PRESSURES kN/m² characteristic punching 24%


CORNER 1 2 3 4
0% 25% 50% 75% 100% 125%
no wind 114.7 194.5 83.4 142.4
with wind 114.7 194.5 83.4 142.4 Efficiency

REINFORCEMENT . .
Mxx = 27.9 kNm Myy = 28.9 kNm
b = 1200 mm b = 1200 mm
d = 245 mm d = 235 mm
As = 273 mm² As = 295 mm²
PROVIDE 6 T10 @ 225 B1 PROVIDE 6 T10 @ 225 B2
As prov = 471 mm² As prov = 471 mm²
. .
BEAM SHEAR . .
Vxx = 58.8 kN at d from col face Vyy = 65.8 kN at d from col face
v = 0.200 N/mm² v= 0.233 N/mm²
or Vxx = 0.0 kN at 2d from col face or Vyy = 9.3 kN at 2d from col face
v = 0.000 N/mm² v= 0.033 N/mm²
vc = 0.434 N/mm² vc = 0.445 N/mm²

PUNCHING SHEAR . .
d ave = 240 mm u crit = 3980 mm
As prov = 0.164 % v max = 1.039 N/mm² at col face
v = 0.105 N/mm² vc = 0.439 N/mm²

You might also like