Hi-Static

Fan Coil Units

with EC motor
Standard and
District Cooling

Range 600 cfm to 2100 cfm

(285 l/s to 991 l/s)

facebook.com/skmaircon www.skmaircon.com @skmaircon

 SKM Fan Coil Units
Hi-Static FCU (EC)

Table of Contents
Introduction ............................ 2 Ratings - DISTRICT COOLING
Legend ................................ 2 Nominal Capacity Ratings ............ 13 Introduction
Nomenclature ....................... 3 Air Flow Rates ............................... 14
General Features .................... 4 Capacity Ratings ......................... 16
Component Features .................. 4 Control System Description ........... 22 SKM Hi - Static Fan Coil Units with Electronically
Application Flexibility .................. 5 Selection ................................... 23 Commutated (EC) Motors are complete line
Options .................................. 6 Control Packages ........................ 23 of fan coil units designed to meet most air
Physical and Electrical Data ............ 7 Valve Packages ............................ 23 conditioning requirements. High quality units
Ratings - STANDARD Ordering and Selection Procedure ... 24 are available for installation in apartments and
Nominal Capacity Ratings .................. 7 Dimensional Data .......................... 25
Air Flow Rates ................................ 8 single or multiform offices, schools, clinics,
Guide Specifications ........................ 27
Capacity Ratings ............................ 10 and etc.

Units are available in (7) standard models

to deliver from 600 cfm (285 l/s) to 2100 cfm
(991 l/s) nominal air flow rate.
Legend
SKM Hi - Static Fan Coil Units with Electronically
The following legends are used throughout this manual:
Commutated Motors rated in accordance to
AHRI - 440 standards.
AFR ...... Air Flow Rate lbs .........Pounds weight (British units)
BEP ...... Baked Enamel Paint l/s ..........Liters per second SKM Hi - Static Fan Coil Units with Electronically
cfm ...... Cubic feet per minute MBh ......000 Btuh Commutated Motors are another premium
dB ....... Decibels NC ........ Noise Criteria international quality product from SKM.
EADB ....Entering Air Dry Bulb OD ........Outside Diameter
EAWB ....Entering Air Wet Bulb Ph .........Phase
ET ......... Evaporating Temperature Pa .........Pascals
Units are certified in accordance with AHRI -
EWT ...... Entering Water Temperature SC ........ Sensible Capacity 440 standards and Coil performance certified
ESP ...... External Static Pressure SCCF....Sensible Capacity Correction in accordance with AHRI - 410 standards.
Ft .......... Total Capacity Factor Factor
ftwg ...... Feet of Water Gauge SPL .......Sound Pressure Level SKM provides qualified service and stock of
Fs ........ Sensible Capacity Factor TC .........Total Capacity
replacement parts in all major cities of the
GPM .... Gallons per minute TCCF ....Total Capacity Correction Factor
Hz ........ Hertz TR ........ Tons of refrigeration = 12 MBH G.C.C. countries, Egypt, Jordan, and Pakistan.
inwg ......Inch of Water Gauge USgpm ..US Gallons per minute See back cover for details or call SKM.
kW ........ Kilowatts V ...........Volts
kg ......... Kilograms WFR ..... Water Flow Rate
kPa ...... Kilo Pascals WTR ..... Water Temperature Rise
LADB ....Leaving Air Dry Bulb WPD .....Water Pressure Drop SKM Air Conditioning LLC
LAWB ... Leaving Air Wet Bulb

SKM reserves the right to change, in part or in

whole the specifications of its Air Conditioning
Equipment at any time in order to add the latest
technology. Therefore, the enclosed information You name it.....We cool it
may change without any prior notice.

2
SKM Fan Coil Units
Hi-Static FCU (EC)

Nomenclature

FCU - DY P - 12 / 4 2 / W G EC
Fan Coil Unit

Application
DY : Direct Drive Standard Series
DCY : Direct Drive District Cooling Series

Construction
P : Ceiling suspended with plenum
E : Ceiling suspended exposed

Unit Size
[Nom. x 100cfm]

Number of Rows
Cooling Coil : 3, 4 or 6

Hot Water Coil : 0 or 1

Chilled Water Coil

Finish
G : Galvanized Finish
F : Painted Finish

EC : EC motor

Notes:
Hi-Static fan coil units with EC Motors manufactured by SKM, are available in two versions: DY Series (for standard applications)
and DCY Series (for District cooling applications) are illustrated in the catalogue.

3
 SKM Fan Coil Units
Hi-Static FCU (EC)
Options
General Features
• Double Skin Units [DSU]
SKM Hi - Static Fan Coil Units with EC Motors are designed and Recommended for all Hi-Static fan coil units, installed in
built in the Gulf to meet requirements of high sensible heat ratio, locations having a high temperature difference between supply
durability and minimum maintenance needs. air temperature and surrounding environment of the unit. This
option is available for DYP and DCYP models only. Additional
sound attenuation is achieved with double skinning.
• High efficiency forward curved fan with EC motors
for quiet operation.
• Stainless Steel (Grade 304) Outer Skin [USS]
• Low power consumption.
• Aluminum Outer Skin [UAL]
• Low fluctuation in room temperature and relative humidity
• Stainless Steel Inner Skin [SIS] Only with DSU
and maintains good comfort level.
• Aluminum Inner Skin [AIS] Only with DSU
• Less Noisy.
• High efficiency coil with high efficiency wavy • Inner Skin with Perforated Sheet [PIS]

corrugated fins. • 13mm thick fiber glass insulation [0SG] Density: 32kg/m3
• Manual air vent.
• Heavy gauge galvanized casing and fan housing. Painting
• Insulated heavy gauge drain pan. FCUs are painted only for DYE and DCYE series. Ivory white
• Isolating grommet for additional vibration isolation. (RAL 7032) as the standard color. All other series are painted
when specified with option code [BEP].
• Quick electrical connections.
• Easy for installation and maintenance.
Options
• Marine Paint [MP]
Why EC Technology? Includes Zinc-rich epoxy powder coating as primer coat and
polyester powder coating as a finish coat.
Electronically Commutated (EC) motors are permanent-magnet
Brushless DC (BLDC) motors in which the motor runs on a DC
voltage, but with a normal AC supply. Coils
Cooling and Heating coils are manufactured from seamless copper
Advantages of EC motors over conventional AC motors are: tubes mechanically bonded to high efficiency wavy corrugated
Aluminum fins. Coils are factory leak tested by air pressure at
300 psig (2068 kPa) under water. Manual air vent is standard.
• High efficiency
Chilled water cooling coils are available in 3, 4 and 6 rows. Coil
• Less power consumption and high energy savings connections are plain tube extensions supplied LH or RH as
• Integrated controller required for chilled water.
• Very simple connections
Hot water coils, single row [CHW1] and double rows [CHW2],
• Quite operation are available to meet a wide range of application requirements.
• Eco friendly and suitable for green building concept
Coils are certified in accordance with AHRI Standard 410. Hi-Static
fan coil units can be supplied with a maximum total of 6 rows/coil.
AHRI-410 Certification does not include the products which are
Component Features certified under AHRI-440.

Options
Casing
• Aeris Guard Coil Coat [EFAA]
Units are constructed from heavy gauge galvanized steel sheet Aeris Guard Coil Coat is a self-etching high performance
complying with ASTM A653 and JIS-G3302 standards against epoxy water based finish. For single dip coating there was no
corrosion. Units are with 12mm thick closed cell polyfoam evidence of corrosion after exposure to 5% Neutral Salt Spray
insulation. Refer to page 5, Application Flexibility, for more details. under AS233.32-1980 (ASTM B117) conditions over periods
in excess of 3000 hours.

4
SKM Fan Coil Units
Hi-Static FCU (EC)
• Extended Drain Pan [EDP]
• Pre-coated Fins [EFAP] • Auxillary Drip Lip [ADP]
The pre-coating is hydrophobic polyurethane. Pre-coated fins Heavy gauge zinc coated auxiliary drip lip supplied loose to
passed a 1000-hr, 5% salt spray test at 95°F (35°C) temperature
and 95% RH, according to ASTM B117. be fitted on the edge of the drain pan under the valves

• Copper fins [EFC]

• Copper fins with Aeris coating [EFCA]
• Connections: Male [MPT], Female [FPT]
• 5/8” OD Coils [OTD]
• Automatic Air Vent [AAV]
Figure 1

Fan and Motor

Forward curved, double inlet, centrifugal fan with EC motors, Application
DYC / DCYC Flexibility
conforming to the standard EN 61800-5-1. Fan casing is
galvanized sheet steel and impeller is sendzimir galvanized 1. DYP EC and DCYP EC
sheet steel. Fan is mounted on electronically commutated
(EC) motor with integrated controls. Motor is class B, insulated Ceiling suspended for concealed applications, includes a
SUPPLY installed plenum. The plenum is lined with 12mm thick
factory
with Thermal Overload Protector (TOP) and wired internally. GRILL
Maximum permissible ambient motor temperature is +80 deg. closed cell polyfoam insulation. Units are supplied with 1”
C and minimum of -40 deg. C. Control input is 0-10 VDC. cleanable filter, as standard.
DYC / DCYC RETURN AIR

Notes
*DYP-EC and DCYP-EC Units up to 1500 CFM is coming
Basic Unit and Cabinet DYPthe
under / DCYP
scope of AHRI-440 Certification.
Units are constructed from high gauge galvanized steel sheet SUPPLY
complying with ASTM-A653 and JSIG-3302 for maximum GRILL

protection against corrosion. On request, as option, electrostatic

polyster powder coating on zinc coated galvanized and SUPPLY
GRILL
FREE RETURN AIR
RETURN
phosphatised panels are available. Ivory white (RAL 7032) is the
standard color and other colors available as an option, on request.
DYP / DCYP RETURN AIR
Figure 2

Filter DYE / DCYE

FCUs are lined with synthetic media filter as standard. 1” (25mm) 2. DYE EC and DCYE EC
SUPPLY FREE
panel filter with Aluminum washable media used as an option GRILL RETURN
Ceiling suspended, exposed type with chilled water coils
[1AF], rated according to EN class G2.
includes
SUPPLY a cabinet with removable access FREEpanels lined with
12mm
GRILL thick closed cell poly foam insulation. Units areRETURN
RETURN supplied
AIR
with 1” cleanable filter. Units are painted with electrostatically
applied polyster powder coat and supplied RETURN with AIR
supply and
Drain Pan DYEair / DCYE
return grilles as standard.
Fabricated from heavy gauge Zinc-coated steel sheets, painted
irrespective of the type of finish for unit casing and insulated
from outside by 4mm thick polyfoam insulation for a maximum
FREE SUPPLY SUPPLY AIR FREE
protection against sweating and corrosion. Drain pan is extended SUPPLY
FREE RETURN
WITH GRILL FREE RETURN
GRILL RETURN
to include coil, headers and U-bends. Drain connection 3/4”
(19mm) OD is provided for removal of condensation.
RETURN AIR

Options
• Stainles Steel (Grade 304) Drain Pan [SDP] insulated from DYF / DCYF
outside with 4mm thick polyfoam insulation. FREE SUPPLY
WITH GRILL SUPPLY AIR FREE
FREE RETURN RETURN

DUCTED
SUPPLY SUPPLY
GRILL Figure 3 GRILL

5
DYF / DCYF
 SKM Fan Coil Units
Hi-Static FCU (EC)

Options and Accessories Ducted Return, Rear (DRR)

The standard options available for Hi - Static fan coil units include: Available only for DYP and DCYP models. Refer to page 25.

Thermostat (CHTS) Ducted Return, Bottom (DRB)

Thermostat is wall-mounted decorative Available only for DYP and DCYP models. Refer to page 25.
type, with large LCD and backlight.
It is energy-efficient modulating
thermostat for controlling of EC fan, Supply and Return Air Grille
operating on AC 24V with DC 0-10V
outputs for valves and fan.
Powder coated double deflection discharge grille (GDD) and
It is very important to note that cooling single deflection return grille (RAG) available as option .
and heating electric valves should be This option is a standard feature in models DYE EC and DCYE
modulating type, since thermostat is EC.
providing 0-10V output for cooling
and heating valves. Grills are powder coated to match color of unit, if option BEP
is ordered.
In case, on/off type valves are used, please consult SKM during
time of order (it may need to add relay converter to operate on/
off valves). UV Lamp with Section (UVL)

Notes
If CHTS option is not ordered, then 0-10V DC signal for the Control and Valve Packages
fan and the required signals and controls for the valves to be Available from Type 1 to type 8. Refer to page 22-24.
provided by others. The unit comes with only junction box with
motor connections, if CHTS option is not included.

Double Skin Units (DSU)

Recommended for all units installed in locations having a high

temperature difference between supply air temperature and
surrounding environment of the Hi - Static fan coil units. This
option is available for DYP and DCYP models only. Additional
sound attenuation is achieved with double skinning. Cold bridges
are avoided fully in the sandwich construction. Perforated inner
skin is available as an option.

Controls

Various options on valve packages and control systems are

available. Eight (8) different valve packages are available factory
installed or loose for field mounting along with (3) options on
control packages. Full details of options available; see full write-
up on page 22-24.

6
SKM Fan Coil Units
Hi-Static FCU (EC)
Physical andData
Physical & Electrical Electrical Data
Unit Size 6 8 10 12 15 18 21
Nominal Airflow Rate cfm 600 800 1000 1200 1500 1800 2100
@ 25Pa ESP, High Speed l/s 283 378 472 566 708 849 991
Type - Copper tubes mechanically bonded to hi-efficiency wavy corrugated Aluminium fins
Coil ft² 1.7 2.0 2.7 3.0 3.5 4.7 5.3
Face Area
m² 0.15 0.19 0.25 0.28 0.33 0.43 0.50
Fan - Forward curved, double inlet, centrifugal fan
Model - 180 180 225 180 180 225 225
Fan & Motor Quantity - 1 1 1 2 2 2 2
Motor - 220V-240V/1Ph/50Hz-60Hz, EC motors. Control input is 0-10 VDC.
Current Drawn A 1.25 1.25 2.20 2.50 2.50 4.40 4.40
lbs 60 67 82 87 109 134 141
3R
kg 27 31 37 40 50 61 64
Unit Weight ** lbs 63 70 86 91 114 141 148
4R
DYP EC & DCYP EC kg 29 32 39 41 52 64 67
lbs 68 77 95 102 126 156 167
6R
kg 31 35 43 46 57 71 76
lbs 80 86 98 107 132 163 174
3R
kg 36 39 45 49 60 74 79
Unit Weight ** lbs 83 89 102 111 137 170 181
4R
DYE EC & DCYE EC kg 38 41 46 51 62 77 82
lbs 86 96 117 122 149 185 200
6R
kg 39 44 53 56 68 84 91
Sound Pressure Level * High dB(A) 41.60 42.38 41.76 42.35 43.08 42.49 46.76

Notes Table 2
** Sound Pressure Level is based on DYP EC model, 4Rows, 0.2 inWg (50Pa) External Static Pressure, air entering temperature
DB/WB 80°F/67°F (27°C/19.5°C), 45°F/55°F (7.2°C/12.8°C) entering /leaving chilled water temperature at maximum capacity.
Sound Pressure Values are indicative only and may vary with actual site conditions.
** Weigt of Basic units are provided (Single skin casing + Fans + Coil Section 6 Row/12 fpi/Al fins + Filter section,1” Thick Flat
Synthetic Media) **
For units with any additional option or sections, consult SKM for weight.

Nominal Capacity Ratings - Standard

DYP EC and DYE EC Chilled Water Coils
3 Rows 4 Rows 6 Rows
Water Water Water
Nominal Total Sensible Water Total Sensible Water Total Sensible Water
Pressure Pressure Pressure
Size Airflow Capacity Capacity Flow Rate Capacity Capacity Flow Rate Capacity Capacity Flow Rate
Drop Drop Drop
cfm MBh MBh gpm ftWg MBh MBh gpm ftWg MBh MBh gpm ftWg
l/s kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
600 17.71 12.88 3.54 8.83 21.59 15.01 4.32 15.15 25.61 17.19 5.12 4.86
6
283 5.19 3.78 0.22 26.38 6.33 4.40 0.27 45.30 7.51 5.04 0.32 14.53
800 22.97 16.77 4.59 15.20 27.36 19.34 5.47 12.35 33.91 22.76 6.78 8.70
8
378 6.73 4.92 0.29 45.44 8.02 5.67 0.35 36.91 9.94 6.67 0.43 26.00
1000 29.45 21.37 5.89 14.14 34.67 24.45 6.93 8.44 43.27 28.86 8.65 8.02
10
472 8.63 6.26 0.37 42.28 10.16 7.17 0.44 25.24 12.68 8.46 0.55 23.98
1200 32.97 24.62 6.59 6.50 41.04 29.01 8.21 11.40 50.87 34.14 10.17 8.01
12
566 9.66 7.21 0.42 19.44 12.03 8.50 0.52 34.07 14.91 10.01 0.64 23.96
1500 40.99 30.48 8.20 10.33 49.02 35.25 9.80 8.44 62.50 42.16 12.50 9.68
15
708 12.01 8.93 0.52 30.88 14.37 10.33 0.62 25.22 18.32 12.36 0.79 28.94
1800 51.58 37.83 10.32 9.28 60.11 43.07 12.02 5.45 77.19 51.62 15.44 7.47
18
849 15.12 11.09 0.65 27.73 17.62 12.62 0.76 16.31 22.63 15.13 0.97 22.33
2100 56.68 42.77 11.34 4.46 71.35 50.65 14.27 7.91 90.77 60.48 18.15 10.67
21
991 16.61 12.54 0.72 13.32 20.91 14.84 0.90 23.63 26.60 17.73 1.15 31.90

Notes Table 3

Chilled water capacity ratings are based on nominal air flow rate; air entering temperature DB/WB 80°F/67°F (27°C/19.5°C),
45°F (7.2°C) entering chilled water temperature and 10°F (5.5°C) water temperature rise.
For conditions other than rated, use SKM FCU Computer Selection Software.

7
 SKM Fan Coil Units
Hi-Static FCU (EC)

Air Flow Rates - Standard

DYP EC
3 Rows 4 Rows 6 Rows
External Static Pressure
Size Speed
inWg 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4
Pa 25 50 75 100 25 50 75 100 25 50 75 100
cfm 709 673 631 582 690 653 610 559 651 614 570 514
6
l/s 334.7 317.6 297.9 274.5 325.6 308.0 287.7 263.7 307.4 289.6 268.8 242.8
cfm 767 723 666 607 748 700 645 588 708 659 608 552
8
l/s 361.8 341.2 314.4 286.5 353.0 330.5 304.3 277.4 333.9 310.9 286.9 260.6
cfm 1212 1150 1084 1020 1174 1112 1050 995 1105 1049 998 954
10
l/s 571.8 542.5 511.3 481.5 553.8 524.7 495.6 469.5 521.2 495.0 470.8 450.0
cfm 1331 1273 1205 1119 1297 1237 1165 1072 1229 1165 1084 978
12 Maximum
l/s 628.1 600.8 568.7 528.0 612.3 583.6 549.6 505.8 580.1 549.6 511.5 461.7
cfm 1457 1377 1284 1180 1416 1333 1241 1136 1336 1253 1163 1051
15
l/s 687.4 650.0 605.8 556.7 668.2 629.2 585.6 536.0 630.3 591.5 548.7 495.8
cfm 2269 2150 2035 1940 2185 2076 1977 1889 2050 1963 1881 1775
18
l/s 1070.6 1014.4 960.5 915.5 1031.3 979.5 932.9 891.3 967.3 926.4 887.6 837.8
cfm 2423 2299 2167 2042 2347 2224 2101 1990 2208 2098 1995 1907
21
l/s 1143.5 1084.9 1022.7 963.5 1107.6 1049.4 991.5 939.0 1042.1 990.1 941.6 900.0
cfm 619 584 538 489 606 567 521 474 575 534 492 448
6
l/s 292.1 275.7 253.7 230.9 285.8 267.5 245.8 223.9 271.1 252.1 232.3 211.3
cfm 635 603 555 504 625 589 541 493 604 562 517 473
8
l/s 299.5 284.5 261.9 237.7 294.9 278.0 255.2 232.4 284.9 265.3 243.7 223.1
cfm 1048 1006 956 898 1028 984 933 875 988 941 889 837
10
l/s 494.5 474.9 451.3 423.8 485.2 464.6 440.1 413.1 466.2 444.0 419.5 394.8
cfm 1201 1133 1049 959 1169 1096 1014 926 1103 1030 953 864
12 Medium
l/s 566.8 534.7 495.0 452.6 551.6 517.3 478.6 437.1 520.6 486.1 449.9 407.8
cfm 1250 1181 1086 986 1225 1148 1053 959 1168 1084 998 910
15
l/s 589.7 557.5 512.3 465.4 578.0 541.5 496.8 452.6 551.2 511.6 470.8 429.3
cfm 2009 1916 1807 1696 1957 1860 1754 1652 1855 1759 1665 1582
18
l/s 948.3 903.9 852.8 800.5 923.7 877.5 827.6 779.4 875.5 829.9 785.8 746.4
cfm 2096 2012 1912 1796 2056 1969 1865 1751 1976 1881 1777 1674
21
l/s 989.0 949.6 902.4 847.4 970.2 929.1 879.9 826.2 932.4 887.7 838.5 789.7
cfm 480 457 423 384 474 449 414 377 462 433 398 364
6
l/s 226.5 215.8 199.5 181.3 223.7 211.9 195.3 178.0 217.8 204.1 187.7 171.9
cfm 487 465 435 397 482 460 428 391 473 449 415 381
8
l/s 229.9 219.5 205.3 187.4 227.4 217.1 202.1 184.5 223.2 212.0 196.0 179.7
cfm 851 813 780 743 837 802 769 732 814 782 749 709
10
l/s 401.5 383.7 367.9 350.8 395.2 378.3 363.1 345.4 383.9 369.0 353.3 334.5
cfm 952 904 832 755 938 884 811 739 906 843 775 709
12 Minimum
l/s 449.2 426.7 392.7 356.5 442.6 417.2 382.8 348.7 427.4 397.9 365.6 334.5
cfm 964 919 852 776 952 905 835 762 930 874 805 737
15
l/s 454.7 433.7 402.2 366.0 449.2 427.0 394.2 359.6 438.9 412.6 379.7 348.0
cfm 1641 1575 1509 1428 1613 1551 1482 1399 1565 1502 1428 1344
18
l/s 774.5 743.2 712.0 673.7 761.3 731.7 699.5 660.1 738.3 708.8 674.0 634.0
cfm 1702 1626 1559 1487 1675 1604 1539 1464 1627 1564 1498 1417
21
l/s 803.0 767.4 735.6 701.6 790.3 757.0 726.1 690.7 767.9 738.0 706.9 668.8
Table 4

8
SKM Fan Coil Units
Hi-Static FCU (EC)

Air Flow Rates - Standard

DYE EC
3 Rows 4 Rows 6 Rows
External Static Pressure
Size Speed
inWg 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4
Pa 25 50 75 100 25 50 75 100 25 50 75 100
cfm 709 673 631 582 690 653 610 559 651 614 570 514
6
l/s 334.7 317.6 297.9 274.5 325.6 308.0 287.7 263.7 307.4 289.6 268.8 242.8
cfm 767 723 666 607 748 700 645 588 708 659 608 552
8
l/s 361.8 341.2 314.4 286.5 353.0 330.5 304.3 277.4 333.9 310.9 286.9 260.6
cfm 1212 1150 1084 1020 1174 1112 1050 995 1105 1049 998 954
10
l/s 571.8 542.5 511.3 481.5 553.8 524.7 495.6 469.5 521.2 495.0 470.8 450.0
cfm 1331 1273 1205 1119 1297 1237 1165 1072 1229 1165 1084 978
12 Maximum
l/s 628.1 600.8 568.7 528.0 612.3 583.6 549.6 505.8 580.1 549.6 511.5 461.7
cfm 1457 1377 1284 1180 1416 1333 1241 1136 1336 1253 1163 1051
15
l/s 687.4 650.0 605.8 556.7 668.2 629.2 585.6 536.0 630.3 591.5 548.7 495.8
cfm 2269 2150 2035 1940 2185 2076 1977 1889 2050 1963 1881 1775
18
l/s 1070.6 1014.4 960.5 915.5 1031.3 979.5 932.9 891.3 967.3 926.4 887.6 837.8
cfm 2423 2299 2167 2042 2347 2224 2101 1990 2208 2098 1995 1907
21
l/s 1143.5 1084.9 1022.7 963.5 1107.6 1049.4 991.5 939.0 1042.1 990.1 941.6 900.0
cfm 619 584 538 489 606 567 521 474 575 534 492 448
6
l/s 292.1 275.7 253.7 230.9 285.8 267.5 245.8 223.9 271.1 252.1 232.3 211.3
cfm 635 603 555 504 625 589 541 493 604 562 517 473
8
l/s 299.5 284.5 261.9 237.7 294.9 278.0 255.2 232.4 284.9 265.3 243.7 223.1
cfm 1048 1006 956 898 1028 984 933 875 988 941 889 837
10
l/s 494.5 474.9 451.3 423.8 485.2 464.6 440.1 413.1 466.2 444.0 419.5 394.8
cfm 1201 1133 1049 959 1169 1096 1014 926 1103 1030 953 864
12 Medium
l/s 566.8 534.7 495.0 452.6 551.6 517.3 478.6 437.1 520.6 486.1 449.9 407.8
cfm 1250 1181 1086 986 1225 1148 1053 959 1168 1084 998 910
15
l/s 589.7 557.5 512.3 465.4 578.0 541.5 496.8 452.6 551.2 511.6 470.8 429.3
cfm 2009 1916 1807 1696 1957 1860 1754 1652 1855 1759 1665 1582
18
l/s 948.3 903.9 852.8 800.5 923.7 877.5 827.6 779.4 875.5 829.9 785.8 746.4
cfm 2096 2012 1912 1796 2056 1969 1865 1751 1976 1881 1777 1674
21
l/s 989.0 949.6 902.4 847.4 970.2 929.1 879.9 826.2 932.4 887.7 838.5 789.7
cfm 480 457 423 384 474 449 414 377 462 433 398 364
6
l/s 226.5 215.8 199.5 181.3 223.7 211.9 195.3 178.0 217.8 204.1 187.7 171.9
cfm 487 465 435 397 482 460 428 391 473 449 415 381
8
l/s 229.9 219.5 205.3 187.4 227.4 217.1 202.1 184.5 223.2 212.0 196.0 179.7
cfm 851 813 780 743 837 802 769 732 814 782 749 709
10
l/s 401.5 383.7 367.9 350.8 395.2 378.3 363.1 345.4 383.9 369.0 353.3 334.5
cfm 952 904 832 755 938 884 811 739 906 843 775 709
12 Minimum
l/s 449.2 426.7 392.7 356.5 442.6 417.2 382.8 348.7 427.4 397.9 365.6 334.5
cfm 964 919 852 776 952 905 835 762 930 874 805 737
15
l/s 454.7 433.7 402.2 366.0 449.2 427.0 394.2 359.6 438.9 412.6 379.7 348.0
cfm 1641 1575 1509 1428 1613 1551 1482 1399 1565 1502 1428 1344
18
l/s 774.5 743.2 712.0 673.7 761.3 731.7 699.5 660.1 738.3 708.8 674.0 634.0
cfm 1702 1626 1559 1487 1675 1604 1539 1464 1627 1564 1498 1417
21
l/s 803.0 767.4 735.6 701.6 790.3 757.0 726.1 690.7 767.9 738.0 706.9 668.8
Table 5

9
 SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - Standard
DYP EC 3 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 709 335 19.32 5.66 14.40 4.22 3.86 0.24 10.37 30.99
0.2 50 673 318 18.79 5.51 13.90 4.07 3.76 0.24 9.85 29.44
Maximum
0.3 75 631 298 18.18 5.33 13.32 3.90 3.64 0.23 9.26 27.69
0.4 100 582 275 17.44 5.11 12.63 3.70 3.49 0.22 8.58 25.65
0.1 25 619 292 18.00 5.28 13.15 3.85 3.60 0.23 9.10 27.20
0.2 50 584 276 17.47 5.12 12.66 3.71 3.49 0.22 8.61 25.74
6 Medium
0.3 75 538 254 16.68 4.89 11.96 3.51 3.34 0.21 7.90 23.63
0.4 100 489 231 15.80 4.63 11.20 3.28 3.16 0.20 7.15 21.38
0.1 25 480 227 15.63 4.58 11.06 3.24 3.13 0.20 7.01 20.97
0.2 50 457 216 15.20 4.46 10.69 3.13 3.04 0.19 6.67 19.93
Minimum
0.3 75 423 200 14.56 4.27 10.13 2.97 2.91 0.18 6.16 18.41
0.4 100 384 181 13.80 4.04 9.48 2.78 2.76 0.17 5.58 16.67
0.1 25 767 362 22.42 6.57 16.29 4.77 4.48 0.28 14.54 43.46
0.2 50 723 341 21.65 6.34 15.63 4.58 4.33 0.27 13.62 40.73
Maximum
0.3 75 666 314 20.74 6.08 14.81 4.34 4.15 0.26 12.59 37.63
0.4 100 607 286 19.81 5.81 13.94 4.09 3.96 0.25 11.57 34.60
0.1 25 635 300 20.26 5.94 14.36 4.21 4.05 0.26 12.06 36.05
0.2 50 603 285 19.74 5.79 13.88 4.07 3.95 0.25 11.50 34.39
8 Medium
0.3 75 555 262 18.96 5.56 13.15 3.86 3.79 0.24 10.67 31.90
0.4 100 504 238 18.09 5.30 12.36 3.62 3.62 0.23 9.79 29.28
0.1 25 487 230 17.80 5.22 12.10 3.55 3.56 0.22 9.50 28.40
0.2 50 465 219 17.34 5.08 11.72 3.44 3.47 0.22 9.06 27.09
Minimum
0.3 75 435 205 16.67 4.89 11.19 3.28 3.33 0.21 8.43 25.19
0.4 100 397 187 15.78 4.63 10.49 3.08 3.16 0.20 7.62 22.79
0.1 25 1212 572 33.19 9.73 24.51 7.18 6.64 0.42 17.63 52.69
0.2 50 1150 543 32.13 9.42 23.61 6.92 6.43 0.41 16.60 49.63
Maximum
0.3 75 1084 512 30.98 9.08 22.64 6.64 6.20 0.39 15.52 46.40
0.4 100 1020 481 29.85 8.75 21.68 6.35 5.97 0.38 14.50 43.33
0.1 25 1048 495 30.34 8.89 22.10 6.48 6.07 0.38 14.94 44.67
0.2 50 1006 475 29.60 8.68 21.47 6.29 5.92 0.37 14.28 42.67
10 Medium
0.3 75 956 451 28.72 8.42 20.72 6.07 5.74 0.36 13.50 40.36
0.4 100 898 424 27.80 8.15 19.88 5.83 5.56 0.35 12.72 38.02
0.1 25 851 402 27.08 7.94 19.20 5.63 5.42 0.34 12.12 36.22
0.2 50 813 384 26.47 7.76 18.64 5.46 5.29 0.33 11.62 34.74
Minimum
0.3 75 780 368 25.94 7.60 18.15 5.32 5.19 0.33 11.19 33.45
0.4 100 743 351 25.33 7.42 17.58 5.15 5.07 0.32 10.71 32.02
0.1 25 1331 628 34.98 10.25 26.44 7.75 7.00 0.44 7.26 21.70
0.2 50 1273 601 34.12 10.00 25.65 7.52 6.82 0.43 6.93 20.72
Maximum
0.3 75 1205 569 33.10 9.70 24.70 7.24 6.62 0.42 6.55 19.58
0.4 100 1119 528 31.78 9.31 23.49 6.88 6.36 0.40 6.07 18.15
0.1 25 1201 567 33.04 9.68 24.65 7.22 6.61 0.42 6.53 19.51
0.2 50 1133 535 31.99 9.38 23.69 6.94 6.40 0.40 6.15 18.38
12 Medium
0.3 75 1049 495 30.67 8.99 22.47 6.59 6.13 0.39 5.69 17.00
0.4 100 959 453 29.13 8.54 21.12 6.19 5.83 0.37 5.16 15.43
0.1 25 952 449 29.00 8.50 21.01 6.16 5.80 0.37 5.12 15.31
0.2 50 904 427 28.17 8.26 20.27 5.94 5.63 0.36 4.85 14.50
Minimum
0.3 75 832 393 26.90 7.88 19.15 5.61 5.38 0.34 4.45 13.31
0.4 100 755 356 25.50 7.47 17.91 5.25 5.10 0.32 4.03 12.05
0.1 25 1457 688 40.38 11.84 29.90 8.76 8.08 0.51 10.05 30.04
0.2 50 1377 650 39.15 11.48 28.77 8.43 7.83 0.49 9.49 28.36
Maximum
0.3 75 1284 606 37.73 11.06 27.46 8.05 7.55 0.48 8.86 26.47
0.4 100 1180 557 36.19 10.61 25.99 7.62 7.24 0.46 8.19 24.49
0.1 25 1250 590 37.22 10.91 26.98 7.91 7.44 0.47 8.63 25.81
0.2 50 1182 558 36.22 10.62 26.02 7.63 7.24 0.46 8.21 24.53
15 Medium
0.3 75 1086 512 34.67 10.16 24.61 7.21 6.93 0.44 7.57 22.62
0.4 100 986 465 32.81 9.62 23.02 6.75 6.56 0.41 6.83 20.42
0.1 25 964 455 32.39 9.49 22.66 6.64 6.48 0.41 6.67 19.94
0.2 50 919 434 31.52 9.24 21.92 6.42 6.30 0.40 6.34 18.96
Minimum
0.3 75 852 402 30.20 8.85 20.80 6.10 6.04 0.38 5.86 17.52
0.4 100 776 366 28.65 8.40 19.51 5.72 5.73 0.36 5.31 15.88
0.1 25 2269 1071 58.80 17.23 44.35 13.00 11.76 0.74 11.84 35.39
0.2 50 2149 1014 57.01 16.71 42.72 12.52 11.40 0.72 11.18 33.41
Maximum
0.3 75 2036 961 55.28 16.20 41.17 12.07 11.06 0.70 10.55 31.55
0.4 100 1939 915 53.79 15.77 39.82 11.67 10.76 0.68 10.03 29.98
0.1 25 2009 948 54.87 16.08 40.79 11.96 10.97 0.69 10.41 31.11
0.2 50 1915 904 53.42 15.66 39.48 11.57 10.68 0.67 9.90 29.60
18 Medium
0.3 75 1808 853 51.77 15.18 37.97 11.13 10.35 0.65 9.34 27.93
0.4 100 1697 801 50.08 14.68 36.40 10.67 10.02 0.63 8.78 26.25
0.1 25 1641 774 49.24 14.43 35.61 10.44 9.85 0.62 8.51 25.43
0.2 50 1575 743 48.27 14.15 34.68 10.17 9.65 0.61 8.20 24.52
Minimum
0.3 75 1509 712 47.29 13.86 33.74 9.89 9.46 0.60 7.90 23.60
0.4 100 1428 674 45.86 13.44 32.49 9.52 9.17 0.58 7.46 22.29
0.1 25 2423 1143 61.38 17.99 47.20 13.84 12.28 0.77 5.18 15.47
0.2 50 2299 1085 59.64 17.48 45.53 13.35 11.93 0.75 4.90 14.66
Maximum
0.3 75 2168 1023 57.76 16.93 43.74 12.82 11.55 0.73 4.62 13.80
0.4 100 2042 964 55.91 16.39 42.00 12.31 11.18 0.71 4.35 12.99
0.1 25 2096 989 56.71 16.62 42.75 12.53 11.34 0.72 4.46 13.34
0.2 50 2012 949 55.47 16.26 41.58 12.19 11.09 0.70 4.28 12.80
21 Medium
0.3 75 1912 902 53.97 15.82 40.16 11.77 10.79 0.68 4.07 12.16
0.4 100 1796 848 52.00 15.24 38.42 11.26 10.40 0.66 3.79 11.34
0.1 25 1702 803 50.34 14.75 36.97 10.84 10.07 0.64 3.57 10.67
0.2 50 1626 767 49.02 14.37 35.81 10.50 9.80 0.62 3.40 10.16
Minimum
0.3 75 1559 736 47.89 14.04 34.79 10.20 9.58 0.60 3.25 9.72
0.4 100 1487 702 46.67 13.68 33.68 9.87 9.33 0.59 3.10 9.27

Data based on 80°F/67°F (27°C/19.5°C) air on-coil DBT/WBT, Table 6

45°F/55°F (7.2°C/12.8°C) entering/leaving chilled water temperature

10
SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - Standard
DYP EC 4 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 690 326 23.67 6.94 16.67 4.89 4.73 0.30 17.93 53.59
0.2 50 653 308 22.83 6.69 16.00 4.69 4.57 0.29 16.78 50.15
Maximum
0.3 75 610 288 21.84 6.40 15.21 4.46 4.37 0.28 15.48 46.27
0.4 100 559 264 20.76 6.08 14.29 4.19 4.15 0.26 14.10 42.15
0.1 25 606 286 21.75 6.38 15.13 4.44 4.35 0.27 15.36 45.92
0.2 50 567 268 20.92 6.13 14.43 4.23 4.18 0.26 14.30 42.74
6 Medium
0.3 75 521 246 19.97 5.85 13.61 3.99 3.99 0.25 13.13 39.25
0.4 100 474 224 18.94 5.55 12.75 3.74 3.79 0.24 11.93 35.65
0.1 25 474 224 18.94 5.55 12.75 3.74 3.79 0.24 11.93 35.65
0.2 50 449 212 18.38 5.39 12.29 3.60 3.68 0.23 11.29 33.74
Minimum
0.3 75 414 195 17.55 5.14 11.61 3.40 3.51 0.22 10.38 31.02
0.4 100 377 178 16.50 4.84 10.82 3.17 3.30 0.21 9.27 27.71
0.1 25 748 353 26.32 7.71 18.44 5.40 5.26 0.33 11.50 34.36
0.2 50 700 330 25.33 7.42 17.59 5.16 5.07 0.32 10.71 32.02
Maximum
0.3 75 645 304 24.24 7.10 16.64 4.88 4.85 0.31 9.88 29.54
0.4 100 588 277 22.96 6.73 15.58 4.57 4.59 0.29 8.95 26.75
0.1 25 625 295 23.83 6.98 16.28 4.77 4.77 0.30 9.58 28.62
0.2 50 589 278 22.99 6.74 15.60 4.57 4.60 0.29 8.97 26.80
8 Medium
0.3 75 541 255 21.78 6.38 14.65 4.29 4.36 0.27 8.12 24.27
0.4 100 493 233 20.53 6.02 13.68 4.01 4.11 0.26 7.28 21.77
0.1 25 482 227 20.23 5.93 13.45 3.94 4.05 0.26 7.09 21.20
0.2 50 460 217 19.64 5.76 13.00 3.81 3.93 0.25 6.71 20.07
Minimum
0.3 75 428 202 18.75 5.49 12.32 3.61 3.75 0.24 6.17 18.44
0.4 100 391 185 17.68 5.18 11.51 3.37 3.54 0.22 5.54 16.55
0.1 25 1173 554 38.05 11.15 27.41 8.03 7.61 0.48 10.02 29.95
0.2 50 1112 525 36.89 10.81 26.38 7.73 7.38 0.47 9.47 28.30
Maximum
0.3 75 1050 495 35.72 10.47 25.34 7.43 7.14 0.45 8.92 26.66
0.4 100 995 470 34.62 10.15 24.38 7.15 6.92 0.44 8.42 25.16
0.1 25 1028 485 35.31 10.35 24.97 7.32 7.06 0.45 8.73 26.09
0.2 50 984 464 34.39 10.08 24.19 7.09 6.88 0.43 8.32 24.86
10 Medium
0.3 75 933 440 33.30 9.76 23.27 6.82 6.66 0.42 7.84 23.42
0.4 100 876 413 32.01 9.38 22.22 6.51 6.40 0.40 7.29 21.79
0.1 25 837 395 31.12 9.12 21.49 6.30 6.22 0.39 6.92 20.68
0.2 50 802 378 30.30 8.88 20.82 6.10 6.06 0.38 6.59 19.69
Minimum
0.3 75 769 363 29.52 8.65 20.19 5.92 5.90 0.37 6.28 18.76
0.4 100 732 345 28.63 8.39 19.48 5.71 5.73 0.36 5.93 17.74
0.1 25 1297 612 43.10 12.63 30.73 9.01 8.62 0.54 12.48 37.31
0.2 50 1237 584 41.86 12.27 29.68 8.70 8.37 0.53 11.82 35.34
Maximum
0.3 75 1165 550 40.37 11.83 28.42 8.33 8.07 0.51 11.06 33.05
0.4 100 1072 506 38.44 11.27 26.78 7.85 7.69 0.49 10.10 30.19
0.1 25 1169 552 40.45 11.86 28.49 8.35 8.09 0.51 11.10 33.17
0.2 50 1097 518 38.96 11.42 27.22 7.98 7.79 0.49 10.35 30.95
12 Medium
0.3 75 1014 479 37.29 10.93 25.77 7.55 7.46 0.47 9.55 28.54
0.4 100 926 437 35.50 10.41 24.22 7.10 7.10 0.45 8.72 26.07
0.1 25 938 443 35.75 10.48 24.43 7.16 7.15 0.45 8.83 26.41
0.2 50 884 417 34.50 10.11 23.41 6.86 6.90 0.44 8.27 24.72
Minimum
0.3 75 811 383 32.65 9.57 21.97 6.44 6.53 0.41 7.47 22.34
0.4 100 739 349 30.78 9.02 20.51 6.01 6.16 0.39 6.70 20.03
0.1 25 1416 668 47.51 13.93 33.87 9.93 9.50 0.60 7.96 23.81
0.2 50 1333 629 45.85 13.44 32.43 9.50 9.17 0.58 7.45 22.28
Maximum
0.3 75 1241 586 43.92 12.87 30.79 9.02 8.78 0.55 6.88 20.57
0.4 100 1136 536 41.57 12.18 28.86 8.46 8.31 0.52 6.22 18.58
0.1 25 1225 578 43.57 12.77 30.50 8.94 8.71 0.55 6.78 20.27
0.2 50 1148 542 41.84 12.26 29.08 8.52 8.37 0.53 6.29 18.80
15 Medium
0.3 75 1053 497 39.66 11.62 27.29 8.00 7.93 0.50 5.69 17.02
0.4 100 959 453 37.42 10.97 25.49 7.47 7.48 0.47 5.12 15.29
0.1 25 952 449 37.26 10.92 25.35 7.43 7.45 0.47 5.07 15.16
0.2 50 905 427 36.12 10.59 24.43 7.16 7.22 0.46 4.79 14.31
Minimum
0.3 75 835 394 34.36 10.07 23.04 6.75 6.87 0.43 4.37 13.05
0.4 100 762 360 32.46 9.51 21.54 6.31 6.49 0.41 3.93 11.75
0.1 25 2186 1032 67.57 19.81 49.59 14.54 13.51 0.85 6.78 20.28
0.2 50 2075 979 65.49 19.20 47.76 14.00 13.10 0.83 6.40 19.13
Maximum
0.3 75 1977 933 63.63 18.65 46.12 13.52 12.73 0.80 6.07 18.13
0.4 100 1888 891 61.91 18.15 44.61 13.08 12.38 0.78 5.76 17.23
0.1 25 1957 924 63.25 18.54 45.79 13.42 12.65 0.80 6.00 17.93
0.2 50 1860 878 61.37 17.99 44.14 12.94 12.27 0.77 5.67 16.95
18 Medium
0.3 75 1755 828 59.29 17.38 42.32 12.40 11.86 0.75 5.32 15.90
0.4 100 1652 780 57.22 16.77 40.51 11.87 11.44 0.72 4.98 14.88
0.1 25 1613 761 56.39 16.53 39.81 11.67 11.28 0.71 4.84 14.48
0.2 50 1551 732 55.01 16.12 38.67 11.33 11.00 0.69 4.63 13.83
Minimum
0.3 75 1482 699 53.46 15.67 37.39 10.96 10.69 0.67 4.39 13.11
0.4 100 1399 660 51.55 15.11 35.82 10.50 10.31 0.65 4.10 12.26
0.1 25 2347 1108 76.11 22.31 54.83 16.07 15.22 0.96 8.91 26.65
0.2 50 2223 1049 73.76 21.62 52.75 15.46 14.75 0.93 8.41 25.14
Maximum
0.3 75 2101 991 71.46 20.95 50.70 14.86 14.29 0.90 7.93 23.70
0.4 100 1990 939 69.23 20.29 48.77 14.29 13.85 0.87 7.48 22.35
0.1 25 2056 970 70.61 20.70 49.94 14.64 14.12 0.89 7.75 23.18
0.2 50 1969 929 68.79 20.16 48.39 14.18 13.76 0.87 7.39 22.08
21 Medium
0.3 75 1864 880 66.55 19.51 46.51 13.63 13.31 0.84 6.95 20.76
0.4 100 1751 826 64.01 18.76 44.42 13.02 12.80 0.81 6.46 19.31
0.1 25 1675 790 62.26 18.25 43.00 12.60 12.45 0.79 6.14 18.35
0.2 50 1604 757 60.60 17.76 41.65 12.21 12.12 0.76 5.84 17.45
Minimum
0.3 75 1539 726 59.06 17.31 40.41 11.84 11.81 0.75 5.57 16.64
0.4 100 1464 691 57.26 16.78 38.96 11.42 11.45 0.72 5.26 15.71

Data based on 80°F/67°F (27°C/19.5°C) air on-coil DBT/WBT, Table 7

45°F/55°F (7.2°C/12.8°C) entering/leaving chilled water temperature

11
 SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - Standard
DYP EC 6 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 651 307 27.12 7.95 18.34 5.38 5.42 0.34 5.40 16.14
0.2 50 614 290 26.05 7.64 17.52 5.13 5.21 0.33 5.02 15.00
Maximum
0.3 75 570 269 24.71 7.24 16.50 4.84 4.94 0.31 4.55 13.60
0.4 100 515 243 22.98 6.74 15.21 4.46 4.60 0.29 3.99 11.91
0.1 25 575 271 24.87 7.29 16.62 4.87 4.97 0.31 4.61 13.77
0.2 50 534 252 23.57 6.91 15.66 4.59 4.71 0.30 4.18 12.48
6 Medium
0.3 75 492 232 22.27 6.53 14.68 4.30 4.45 0.28 3.76 11.24
0.4 100 448 211 20.89 6.12 13.64 4.00 4.18 0.26 3.35 10.00
0.1 25 462 218 21.33 6.25 13.97 4.09 4.27 0.27 3.48 10.39
0.2 50 433 204 20.41 5.98 13.28 3.89 4.08 0.26 3.21 9.58
Minimum
0.3 75 398 188 19.27 5.65 12.44 3.65 3.85 0.24 2.89 8.63
0.4 100 364 172 18.11 5.31 11.60 3.40 3.62 0.23 2.58 7.70
0.1 25 708 334 31.23 9.15 20.70 6.07 6.25 0.39 7.47 22.34
0.2 50 659 311 29.68 8.70 19.56 5.73 5.94 0.37 6.81 20.36
Maximum
0.3 75 608 287 28.03 8.22 18.34 5.38 5.61 0.35 6.13 18.33
0.4 100 552 260 26.17 7.67 16.98 4.98 5.23 0.33 5.41 16.16
0.1 25 604 285 27.90 8.18 18.24 5.35 5.58 0.35 6.08 18.17
0.2 50 562 265 26.51 7.77 17.23 5.05 5.30 0.33 5.54 16.55
8 Medium
0.3 75 516 244 24.93 7.31 16.09 4.72 4.99 0.31 4.95 14.79
0.4 100 472 223 23.39 6.85 14.98 4.39 4.68 0.30 4.40 13.16
0.1 25 473 223 23.42 6.87 15.01 4.40 4.68 0.30 4.41 13.19
0.2 50 449 212 22.56 6.61 14.40 4.22 4.51 0.28 4.12 12.32
Minimum
0.3 75 415 196 21.31 6.24 13.51 3.96 4.26 0.27 3.71 11.10
0.4 100 381 180 20.00 5.86 12.61 3.70 4.00 0.25 3.31 9.89
0.1 25 1104 521 46.34 13.58 31.20 9.14 9.27 0.58 9.10 27.19
0.2 50 1049 495 44.75 13.12 29.98 8.79 8.95 0.56 8.53 25.51
Maximum
0.3 75 998 471 43.26 12.68 28.83 8.45 8.65 0.55 8.02 23.96
0.4 100 954 450 41.94 12.29 27.83 8.16 8.39 0.53 7.57 22.64
0.1 25 988 466 42.96 12.59 28.60 8.38 8.59 0.54 7.91 23.66
0.2 50 941 444 41.54 12.18 27.53 8.07 8.31 0.52 7.44 22.25
10 Medium
0.3 75 889 420 39.91 11.70 26.32 7.71 7.98 0.50 6.91 20.67
0.4 100 837 395 38.23 11.21 25.08 7.35 7.65 0.48 6.39 19.11
0.1 25 814 384 37.48 10.99 24.53 7.19 7.50 0.47 6.16 18.43
0.2 50 782 369 36.43 10.68 23.76 6.96 7.29 0.46 5.85 17.49
Minimum
0.3 75 749 353 35.33 10.36 22.96 6.73 7.07 0.45 5.53 16.54
0.4 100 709 335 33.97 9.96 21.97 6.44 6.79 0.43 5.15 15.39
0.1 25 1229 580 51.76 15.17 34.81 10.20 10.35 0.65 8.28 24.74
0.2 50 1164 549 49.88 14.62 33.36 9.78 9.98 0.63 7.73 23.10
Maximum
0.3 75 1084 512 47.50 13.92 31.56 9.25 9.50 0.60 7.06 21.11
0.4 100 978 462 44.19 12.95 29.08 8.52 8.84 0.56 6.18 18.48
0.1 25 1103 521 48.07 14.09 31.99 9.38 9.61 0.61 7.22 21.58
0.2 50 1030 486 45.84 13.44 30.31 8.88 9.17 0.58 6.62 19.77
12 Medium
0.3 75 953 450 43.38 12.71 28.49 8.35 8.68 0.55 5.98 17.86
0.4 100 864 408 40.46 11.86 26.35 7.72 8.09 0.51 5.26 15.71
0.1 25 906 428 41.85 12.27 27.36 8.02 8.37 0.53 5.59 16.72
0.2 50 843 398 39.76 11.65 25.84 7.57 7.95 0.50 5.09 15.22
Minimum
0.3 75 775 366 37.43 10.97 24.16 7.08 7.49 0.47 4.56 13.62
0.4 100 709 335 35.12 10.29 22.50 6.59 7.02 0.44 4.05 12.11
0.1 25 1336 630 57.98 16.99 38.61 11.32 11.60 0.73 8.43 25.19
0.2 50 1254 592 55.50 16.27 36.74 10.77 11.10 0.70 7.77 23.24
Maximum
0.3 75 1163 549 52.63 15.43 34.61 10.14 10.53 0.66 7.05 21.07
0.4 100 1051 496 48.96 14.35 31.92 9.36 9.79 0.62 6.17 18.45
0.1 25 1168 551 52.79 15.47 34.72 10.18 10.56 0.67 7.09 21.19
0.2 50 1084 512 50.05 14.67 32.72 9.59 10.01 0.63 6.43 19.21
15 Medium
0.3 75 998 471 47.18 13.83 30.63 8.98 9.44 0.60 5.76 17.23
0.4 100 909 429 44.13 12.93 28.43 8.33 8.83 0.56 5.10 15.24
0.1 25 930 439 44.86 13.15 28.95 8.48 8.97 0.57 5.25 15.70
0.2 50 874 412 42.89 12.57 27.54 8.07 8.58 0.54 4.84 14.46
Minimum
0.3 75 805 380 40.40 11.84 25.78 7.56 8.08 0.51 4.33 12.95
0.4 100 737 348 37.87 11.10 24.01 7.04 7.57 0.48 3.85 11.50
0.1 25 2050 967 84.34 24.72 57.14 16.75 16.87 1.06 8.80 26.30
0.2 50 1963 926 81.98 24.03 55.28 16.20 16.40 1.03 8.35 24.95
Maximum
0.3 75 1881 888 79.63 23.34 53.47 15.67 15.93 1.00 7.91 23.65
0.4 100 1774 837 76.51 22.43 51.07 14.97 15.30 0.97 7.35 21.96
0.1 25 1855 875 78.88 23.12 52.89 15.50 15.78 1.00 7.77 23.24
0.2 50 1759 830 76.07 22.30 50.73 14.87 15.21 0.96 7.27 21.73
18 Medium
0.3 75 1665 786 73.25 21.47 48.60 14.25 14.65 0.92 6.78 20.27
0.4 100 1582 747 70.67 20.71 46.68 13.68 14.13 0.89 6.35 18.97
0.1 25 1564 738 70.10 20.55 46.25 13.56 14.02 0.88 6.25 18.69
0.2 50 1502 709 68.11 19.96 44.78 13.13 13.62 0.86 5.93 17.72
Minimum
0.3 75 1429 674 65.74 19.27 43.04 12.61 13.15 0.83 5.55 16.60
0.4 100 1343 634 62.91 18.44 40.96 12.01 12.58 0.79 5.12 15.31
0.1 25 2209 1042 94.01 27.55 62.94 18.45 18.80 1.19 11.39 34.03
0.2 50 2098 990 90.80 26.61 60.48 17.73 18.16 1.15 10.68 31.92
Maximum
0.3 75 1996 942 87.84 25.75 58.21 17.06 17.57 1.11 10.05 30.03
0.4 100 1906 899 85.24 24.98 56.21 16.47 17.05 1.08 9.50 28.41
0.1 25 1976 932 87.26 25.58 57.77 16.93 17.45 1.10 9.92 29.66
0.2 50 1881 888 84.52 24.77 55.65 16.31 16.90 1.07 9.36 27.97
21 Medium
0.3 75 1777 839 81.41 23.86 53.28 15.62 16.28 1.03 8.73 26.10
0.4 100 1673 789 77.95 22.85 50.78 14.88 15.59 0.98 8.06 24.10
0.1 25 1627 768 76.40 22.39 49.65 14.55 15.28 0.96 7.77 23.22
0.2 50 1564 738 74.25 21.76 48.10 14.10 14.85 0.94 7.37 22.03
Minimum
0.3 75 1498 707 71.96 21.09 46.46 13.62 14.39 0.91 6.96 20.80
0.4 100 1417 669 69.11 20.26 44.43 13.02 13.82 0.87 6.46 19.31

Data based on 80°F/67°F (27°C/19.5°C) air on-coil DBT/WBT, Table 8

45°F/55°F (7.2°C/12.8°C) entering/leaving chilled water temperature

12
SKM Fan Coil Units
Hi-Static FCU (EC)

Nominal Capacity Ratings - District Cooling

DCYP EC and DCYE EC Chilled Water Coils

3 Rows 4 Rows 6 Rows

Water Water Water

Nominal Total Sensible Water Total Sensible Water Total Sensible Water
Pressure Pressure Pressure
Size Airflow Capacity Capacity Flow Rate Drop Capacity Capacity Flow Rate Drop Capacity Capacity Flow Rate Drop

cfm MBh MBh gpm ftWg MBh MBh gpm ftWg MBh MBh gpm ftWg
l/s kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
600 16.55 12.73 2.07 21.34 17.66 13.82 2.21 10.61 22.64 16.40 2.83 10.91
6
283 4.85 3.73 0.13 63.78 5.18 4.05 0.14 31.71 6.64 4.81 0.18 32.61
800 18.58 15.49 2.32 10.04 22.13 17.75 2.77 8.23 32.22 22.65 4.03 22.27
8
378 5.44 4.54 0.15 30.02 6.49 5.20 0.17 24.59 9.44 6.64 0.25 66.56
1000 23.59 19.63 2.95 9.21 32.54 24.20 4.07 20.54 38.09 27.45 4.76 13.25
10
472 6.92 5.75 0.19 27.54 9.54 7.09 0.26 61.39 11.16 8.04 0.30 39.62
1200 30.41 24.20 3.80 14.24 33.19 26.63 4.15 7.39 43.03 31.78 5.38 7.71
12
566 8.91 7.09 0.24 42.56 9.73 7.80 0.26 22.09 12.61 9.31 0.34 23.03
1500 32.66 28.03 4.08 6.29 44.69 34.36 5.59 13.66 56.53 40.77 7.07 13.65
15
708 9.57 8.22 0.26 18.80 13.10 10.07 0.35 40.83 16.57 11.95 0.45 40.82
1800 46.94 36.92 5.87 14.90 53.54 41.49 6.69 11.30 65.65 48.17 8.21 7.90
18
849 13.76 10.82 0.37 44.55 15.69 12.16 0.42 33.77 19.24 14.12 0.52 23.62
2100 48.93 40.79 6.12 8.34 59.57 47.21 7.45 8.35 79.76 57.47 9.97 12.08
21
991 14.34 11.96 0.39 24.92 17.46 13.84 0.47 24.97 23.38 16.84 0.63 36.10
Table 9

Notes

Chilled water capacity ratings are based on nominal air flow rate; air entering temperature DB/WB 78°F/65°F (25.5°C/18.3°C),
42°F (5.5°C) entering chilled water temperature and 16°F (8.9°C) water temperature rise.

For conditions other than rated, use SKM FCU Computer Selection Software.

13
 SKM Fan Coil Units
Hi-Static FCU (EC)
Air Flow Rates - District Cooling
DCYP EC
3 Rows 4 Rows 6 Rows
External Static Pressure
Size Speed
inWg 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4
Pa 25 50 75 100 25 50 75 100 25 50 75 100
cfm 739 691 641 593 721 674 626 579 688 644 600 553
6
l/s 348.7 326.2 302.5 279.6 340.3 318.0 295.6 273.2 324.5 303.8 283.3 261.0
cfm 775 733 680 627 763 719 667 615 739 691 643 595
8
l/s 365.7 345.8 320.7 295.7 360.1 339.1 314.6 290.3 348.5 326.2 303.5 280.7
cfm 1259 1200 1133 1063 1234 1174 1108 1041 1186 1125 1062 1004
10
l/s 594.1 566.5 534.6 501.4 582.3 554.1 522.7 491.3 559.5 530.7 501.4 474.0
cfm 1423 1329 1236 1140 1382 1292 1204 1109 1311 1230 1147 1052
12 Maximum
l/s 671.6 626.9 583.2 537.8 652.4 609.8 568.3 523.2 618.6 580.6 541.2 496.5
cfm 1500 1406 1304 1204 1467 1372 1275 1178 1404 1313 1224 1130
15
l/s 707.9 663.3 615.2 568.2 692.4 647.7 601.7 556.1 662.4 619.8 577.7 533.2
cfm 2384 2258 2129 2011 2322 2199 2078 1972 2209 2097 1995 1906
18
l/s 1125.1 1065.7 1004.7 948.8 1095.7 1037.5 980.7 930.8 1042.3 989.7 941.7 899.2
cfm 2518 2401 2265 2125 2469 2348 2214 2082 2371 2249 2124 2009
21
l/s 1188.2 1132.9 1069.0 1002.8 1165.0 1108.0 1044.9 982.6 1118.8 1061.4 1002.4 948.2
cfm 625 593 551 507 616 582 540 498 599 561 522 483
6
l/s 294.7 279.7 259.8 239.3 290.9 274.7 254.9 235.2 282.5 264.9 246.1 227.8
cfm 643 616 577 531 637 609 569 524 626 594 553 510
8
l/s 303.4 290.5 272.5 250.8 300.6 287.4 268.7 247.1 295.2 280.5 261.1 240.7
cfm 1076 1034 988 931 1062 1021 973 916 1036 993 943 886
10
l/s 507.9 488.0 466.2 439.6 501.1 481.7 459.2 432.1 488.8 468.8 444.9 417.9
cfm 1222 1150 1066 984 1200 1125 1044 965 1155 1080 1005 929
12 Medium
l/s 576.8 542.7 503.3 464.2 566.2 531.0 492.7 455.4 544.8 509.5 474.2 438.6
cfm 1260 1199 1116 1027 1245 1180 1097 1011 1214 1142 1060 980
15
l/s 594.4 566.0 526.6 484.8 587.6 557.0 517.5 477.0 572.9 539.0 500.4 462.7
cfm 2073 1987 1883 1766 2041 1951 1845 1731 1975 1880 1775 1670
18
l/s 978.3 937.7 888.6 833.4 963.0 920.7 870.7 817.0 932.0 887.2 837.7 788.0
cfm 2152 2068 1976 1863 2124 2041 1945 1831 2071 1987 1885 1771
21
l/s 1015.7 975.8 932.4 879.0 1002.1 963.1 918.0 863.8 977.4 937.5 889.6 835.8
cfm 490 469 443 408 486 465 438 403 478 457 428 394
6
l/s 231.3 221.4 209.1 192.7 229.1 219.5 206.6 190.2 225.3 215.7 201.8 185.9
cfm 505 479 457 424 500 476 453 420 492 471 446 412
8
l/s 238.1 226.0 215.6 199.9 236.0 224.7 213.8 198.0 232.2 222.2 210.4 194.3
cfm 871 831 794 760 862 823 788 753 844 807 775 738
10
l/s 411.0 392.2 374.8 358.5 406.6 388.3 371.8 355.3 398.3 381.0 365.7 348.4
cfm 964 924 866 797 955 914 854 786 938 892 830 765
12 Minimum
l/s 455.1 435.8 408.9 376.1 450.8 431.1 402.9 370.7 442.8 420.8 391.7 361.1
cfm 988 944 895 825 979 937 885 816 963 923 866 797
15
l/s 466.2 445.4 422.1 389.3 461.8 442.2 417.5 384.9 454.3 435.4 408.6 376.3
cfm 1684 1611 1544 1469 1663 1594 1528 1451 1625 1562 1495 1414
18
l/s 794.5 760.1 728.7 693.4 784.6 752.0 721.1 684.5 766.9 737.0 705.6 667.2
cfm 1742 1662 1589 1519 1723 1645 1575 1506 1688 1615 1550 1477
21
l/s 821.9 784.2 749.7 716.9 813.1 776.5 743.4 710.5 796.5 762.3 731.3 696.9
Table 10

14
SKM Fan Coil Units
Hi-Static FCU (EC)

Air Flow Rates - District Cooling

DCYE EC
3 Rows 4 Rows 6 Rows
External Static Pressure
Size Speed
inWg 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4
Pa 25 50 75 100 25 50 75 100 25 50 75 100
cfm 739 691 641 593 721 674 626 579 688 644 600 553
6
l/s 348.7 326.2 302.5 279.6 340.3 318.0 295.6 273.2 324.5 303.8 283.3 261.0
cfm 775 733 680 627 763 719 667 615 739 691 643 595
8
l/s 365.7 345.8 320.7 295.7 360.1 339.1 314.6 290.3 348.5 326.2 303.5 280.7
cfm 1259 1200 1133 1063 1234 1174 1108 1041 1186 1125 1062 1004
10
l/s 594.1 566.5 534.6 501.4 582.3 554.1 522.7 491.3 559.5 530.7 501.4 474.0
cfm 1423 1329 1236 1140 1382 1292 1204 1109 1311 1230 1147 1052
12 Maximum
l/s 671.6 626.9 583.2 537.8 652.4 609.8 568.3 523.2 618.6 580.6 541.2 496.5
cfm 1500 1406 1304 1204 1467 1372 1275 1178 1404 1313 1224 1130
15
l/s 707.9 663.3 615.2 568.2 692.4 647.7 601.7 556.1 662.4 619.8 577.7 533.2
cfm 2384 2258 2129 2011 2322 2199 2078 1972 2209 2097 1995 1906
18
l/s 1125.1 1065.7 1004.7 948.8 1095.7 1037.5 980.7 930.8 1042.3 989.7 941.7 899.2
cfm 2518 2401 2265 2125 2469 2348 2214 2082 2371 2249 2124 2009
21
l/s 1188.2 1132.9 1069.0 1002.8 1165.0 1108.0 1044.9 982.6 1118.8 1061.4 1002.4 948.2
cfm 625 593 551 507 616 582 540 498 599 561 522 483
6
l/s 294.7 279.7 259.8 239.3 290.9 274.7 254.9 235.2 282.5 264.9 246.1 227.8
cfm 643 616 577 531 637 609 569 524 626 594 553 510
8
l/s 303.4 290.5 272.5 250.8 300.6 287.4 268.7 247.1 295.2 280.5 261.1 240.7
cfm 1076 1034 988 931 1062 1021 973 916 1036 993 943 886
10
l/s 507.9 488.0 466.2 439.6 501.1 481.7 459.2 432.1 488.8 468.8 444.9 417.9
cfm 1222 1150 1066 984 1200 1125 1044 965 1155 1080 1005 929
12 Medium
l/s 576.8 542.7 503.3 464.2 566.2 531.0 492.7 455.4 544.8 509.5 474.2 438.6
cfm 1260 1199 1116 1027 1245 1180 1097 1011 1214 1142 1060 980
15
l/s 594.4 566.0 526.6 484.8 587.6 557.0 517.5 477.0 572.9 539.0 500.4 462.7
cfm 2073 1987 1883 1766 2041 1951 1845 1731 1975 1880 1775 1670
18
l/s 978.3 937.7 888.6 833.4 963.0 920.7 870.7 817.0 932.0 887.2 837.7 788.0
cfm 2152 2068 1976 1863 2124 2041 1945 1831 2071 1987 1885 1771
21
l/s 1015.7 975.8 932.4 879.0 1002.1 963.1 918.0 863.8 977.4 937.5 889.6 835.8
cfm 490 469 443 408 486 465 438 403 478 457 428 394
6
l/s 231.3 221.4 209.1 192.7 229.1 219.5 206.6 190.2 225.3 215.7 201.8 185.9
cfm 505 479 457 424 500 476 453 420 492 471 446 412
8
l/s 238.1 226.0 215.6 199.9 236.0 224.7 213.8 198.0 232.2 222.2 210.4 194.3
cfm 871 831 794 760 862 823 788 753 844 807 775 738
10
l/s 411.0 392.2 374.8 358.5 406.6 388.3 371.8 355.3 398.3 381.0 365.7 348.4
cfm 964 924 866 797 955 914 854 786 938 892 830 765
12 Minimum
l/s 455.1 435.8 408.9 376.1 450.8 431.1 402.9 370.7 442.8 420.8 391.7 361.1
cfm 988 944 895 825 979 937 885 816 963 923 866 797
15
l/s 466.2 445.4 422.1 389.3 461.8 442.2 417.5 384.9 454.3 435.4 408.6 376.3
cfm 1684 1611 1544 1469 1663 1594 1528 1451 1625 1562 1495 1414
18
l/s 794.5 760.1 728.7 693.4 784.6 752.0 721.1 684.5 766.9 737.0 705.6 667.2
cfm 1742 1662 1589 1519 1723 1645 1575 1506 1688 1615 1550 1477
21
l/s 821.9 784.2 749.7 716.9 813.1 776.5 743.4 710.5 796.5 762.3 731.3 696.9
Table 11

15
 SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - District Cooling
DCYP EC 3 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 745 352 16.53 4.84 14.24 4.17 2.07 0.13 21.28 63.62
0.2 50 696 328 15.37 4.50 13.37 3.92 1.92 0.12 18.71 55.93
Maximum
0.3 75 646 305 14.22 4.17 12.49 3.66 1.78 0.11 16.32 48.77
0.4 100 597 282 13.22 3.87 11.67 3.42 1.65 0.10 14.34 42.87
0.1 25 627 296 13.81 4.05 12.17 3.57 1.73 0.11 15.50 46.35
0.2 50 596 281 13.20 3.87 11.65 3.41 1.65 0.10 14.31 42.77
6 Medium
0.3 75 554 261 12.48 3.66 10.99 3.22 1.56 0.10 12.96 38.75
0.4 100 509 240 11.91 3.49 10.35 3.03 1.49 0.09 11.94 35.69
0.1 25 492 232 11.71 3.43 10.11 2.96 1.46 0.09 11.58 34.63
0.2 50 470 222 11.46 3.36 9.81 2.87 1.43 0.09 11.15 33.32
Minimum
0.3 75 445 210 11.18 3.28 9.46 2.77 1.40 0.09 10.67 31.91
0.4 100 410 193 10.80 3.17 8.97 2.63 1.35 0.09 10.04 30.01
0.1 25 778 367 15.33 4.49 14.36 4.21 1.92 0.12 7.15 21.36
0.2 50 737 348 14.77 4.33 13.77 4.04 1.85 0.12 6.69 20.00
Maximum
0.3 75 684 323 14.10 4.13 13.03 3.82 1.76 0.11 6.16 18.41
0.4 100 630 297 13.45 3.94 12.27 3.60 1.68 0.11 5.67 16.95
0.1 25 645 304 13.63 3.99 12.48 3.66 1.70 0.11 5.80 17.34
0.2 50 618 292 13.31 3.90 12.11 3.55 1.66 0.10 5.56 16.63
8 Medium
0.3 75 580 274 12.88 3.77 11.58 3.39 1.61 0.10 5.25 15.68
0.4 100 533 252 12.34 3.62 10.92 3.20 1.54 0.10 4.87 14.55
0.1 25 506 239 12.04 3.53 10.53 3.09 1.50 0.09 4.66 13.91
0.2 50 480 227 11.73 3.44 10.16 2.98 1.47 0.09 4.45 13.30
Minimum
0.3 75 458 216 11.47 3.36 9.84 2.88 1.43 0.09 4.28 12.78
0.4 100 425 201 11.06 3.24 9.34 2.74 1.38 0.09 4.01 11.99
0.1 25 1266 597 24.16 7.08 22.55 6.61 3.02 0.19 9.61 28.73
0.2 50 1209 571 23.13 6.78 21.67 6.35 2.89 0.18 8.90 26.59
Maximum
0.3 75 1141 538 22.00 6.45 20.65 6.05 2.75 0.17 8.14 24.32
0.4 100 1070 505 20.91 6.13 19.61 5.75 2.61 0.16 7.44 22.24
0.1 25 1081 510 21.07 6.18 19.77 5.80 2.63 0.17 7.54 22.55
0.2 50 1038 490 20.45 5.99 19.15 5.61 2.56 0.16 7.15 21.38
10 Medium
0.3 75 993 469 19.83 5.81 18.51 5.42 2.48 0.16 6.77 20.25
0.4 100 936 442 19.10 5.60 17.70 5.19 2.39 0.15 6.33 18.93
0.1 25 874 412 18.34 5.37 16.84 4.93 2.29 0.14 5.89 17.62
0.2 50 834 394 17.87 5.24 16.28 4.77 2.23 0.14 5.63 16.83
Minimum
0.3 75 797 376 17.44 5.11 15.77 4.62 2.18 0.14 5.39 16.12
0.4 100 762 360 17.04 4.99 15.28 4.48 2.13 0.13 5.18 15.47
0.1 25 1436 678 29.51 8.65 26.34 7.72 3.69 0.23 13.50 40.34
0.2 50 1341 633 27.43 8.04 24.75 7.25 3.43 0.22 11.85 35.43
Maximum
0.3 75 1246 588 25.35 7.43 23.13 6.78 3.17 0.20 10.31 30.81
0.4 100 1150 543 23.73 6.95 21.66 6.35 2.97 0.19 9.17 27.40
0.1 25 1229 580 25.00 7.33 22.85 6.70 3.12 0.20 10.06 30.06
0.2 50 1157 546 23.84 6.99 21.76 6.38 2.98 0.19 9.24 27.62
12 Medium
0.3 75 1073 506 22.61 6.63 20.53 6.02 2.83 0.18 8.42 25.16
0.4 100 989 467 21.51 6.30 19.33 5.67 2.69 0.17 7.70 23.02
0.1 25 967 456 21.23 6.22 19.02 5.58 2.65 0.17 7.53 22.50
0.2 50 927 437 20.75 6.08 18.46 5.41 2.59 0.16 7.23 21.60
Minimum
0.3 75 870 411 20.09 5.89 17.67 5.18 2.51 0.16 6.82 20.40
0.4 100 800 378 19.30 5.66 16.69 4.89 2.41 0.15 6.36 19.00
0.1 25 1510 713 25.12 7.36 25.12 7.36 3.14 0.20 3.94 11.78
0.2 50 1416 668 23.99 7.03 23.99 7.03 3.00 0.19 3.63 10.85
Maximum
0.3 75 1313 620 25.13 7.37 24.04 7.05 3.14 0.20 3.94 11.79
0.4 100 1212 572 23.92 7.01 22.65 6.64 2.99 0.19 3.61 10.79
0.1 25 1264 596 24.54 7.19 23.37 6.85 3.07 0.19 3.78 11.29
0.2 50 1205 569 21.55 6.32 21.55 6.32 2.69 0.17 3.00 8.97
15 Medium
0.3 75 1123 530 22.89 6.71 21.43 6.28 2.86 0.18 3.34 9.98
0.4 100 1032 487 21.86 6.41 20.16 5.91 2.73 0.17 3.08 9.20
0.1 25 991 468 21.40 6.27 19.59 5.74 2.68 0.17 2.96 8.85
0.2 50 946 446 20.88 6.12 18.96 5.56 2.61 0.16 2.84 8.48
Minimum
0.3 75 897 423 20.32 5.96 18.26 5.35 2.54 0.16 2.70 8.07
0.4 100 828 391 19.50 5.71 17.25 5.06 2.44 0.15 2.51 7.50
0.1 25 2404 1134 50.40 14.77 44.10 12.93 6.30 0.40 16.91 50.56
0.2 50 2277 1075 48.00 14.07 42.14 12.35 6.00 0.38 15.51 46.36
Maximum
0.3 75 2146 1013 45.19 13.24 39.96 11.71 5.65 0.36 13.93 41.64
0.4 100 2023 955 42.41 12.43 37.85 11.09 5.30 0.33 12.45 37.21
0.1 25 2083 983 43.77 12.83 38.88 11.40 5.47 0.35 13.16 39.35
0.2 50 1998 943 41.85 12.27 37.41 10.97 5.23 0.33 12.15 36.33
18 Medium
0.3 75 1895 894 39.58 11.60 35.65 10.45 4.95 0.31 11.01 32.91
0.4 100 1777 839 37.25 10.92 33.71 9.88 4.66 0.29 9.89 29.55
0.1 25 1690 798 35.95 10.54 32.42 9.50 4.49 0.28 9.28 27.75
0.2 50 1616 763 34.91 10.23 31.35 9.19 4.36 0.28 8.81 26.34
Minimum
0.3 75 1549 731 34.03 9.97 30.39 8.91 4.25 0.27 8.42 25.17
0.4 100 1475 696 33.10 9.70 29.35 8.60 4.14 0.26 8.02 23.97
0.1 25 2533 1195 48.34 14.17 45.12 13.22 6.04 0.38 8.16 24.39
0.2 50 2417 1141 46.25 13.55 43.33 12.70 5.78 0.36 7.54 22.54
Maximum
0.3 75 2282 1077 43.99 12.89 41.30 12.11 5.50 0.35 6.90 20.62
0.4 100 2140 1010 41.82 12.26 39.22 11.50 5.23 0.33 6.30 18.85
0.1 25 2162 1020 42.14 12.35 39.54 11.59 5.27 0.33 6.39 19.11
0.2 50 2076 980 40.90 11.99 38.30 11.23 5.11 0.32 6.06 18.12
21 Medium
0.3 75 1985 937 39.66 11.62 37.00 10.85 4.96 0.31 5.74 17.15
0.4 100 1872 883 38.19 11.19 35.41 10.38 4.77 0.30 5.36 16.04
0.1 25 1747 824 36.66 10.75 33.66 9.87 4.58 0.29 4.99 14.91
0.2 50 1667 787 35.72 10.47 32.54 9.54 4.46 0.28 4.76 14.24
Minimum
0.3 75 1593 752 34.86 10.22 31.52 9.24 4.36 0.27 4.56 13.64
0.4 100 1524 719 34.08 9.99 30.56 8.96 4.26 0.27 4.38 13.10
Table 12
Data based on 76°F/63°F (24.4°C/17.2°C) air on-coil DBT/WBT,
42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

16
SKM Fan Coil Units
Hi-Static FCU (EC)

Airflow Total Sensible Water Water

ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 745 352 20.14 5.90 15.33 4.49 2.52 0.16 30.19 90.24
0.2 50 696 328 19.14 5.61 14.54 4.26 2.39 0.15 27.58 82.44
Maximum
0.3 75 646 305 17.78 5.21 13.60 3.99 2.22 0.14 24.23 72.41
0.4 100 597 282 16.40 4.81 12.65 3.71 2.05 0.13 20.99 62.75
0.1 25 627 296 17.23 5.05 13.22 3.88 2.15 0.14 22.91 68.48
0.2 50 596 281 16.37 4.80 12.63 3.70 2.05 0.13 20.93 62.58
6 Medium
0.3 75 554 261 15.33 4.49 11.86 3.48 1.92 0.12 18.64 55.71
0.4 100 509 240 14.39 4.22 11.09 3.25 1.80 0.11 16.66 49.79
0.1 25 492 232 14.08 4.13 10.82 3.17 1.76 0.11 16.03 47.92
0.2 50 470 222 13.72 4.02 10.48 3.07 1.71 0.11 15.31 45.76
Minimum
0.3 75 445 210 13.35 3.91 10.10 2.96 1.67 0.11 14.59 43.61
0.4 100 410 193 12.90 3.78 9.60 2.81 1.61 0.10 13.74 41.06
0.1 25 778 367 18.12 5.31 15.13 4.43 2.26 0.14 9.61 28.72
0.2 50 737 348 17.42 5.11 14.51 4.25 2.18 0.14 8.96 26.79
Maximum
0.3 75 684 323 16.60 4.87 13.73 4.02 2.08 0.13 8.23 24.60
0.4 100 630 297 15.84 4.64 12.95 3.79 1.98 0.12 7.57 22.63
0.1 25 645 304 16.04 4.70 13.16 3.86 2.01 0.13 7.75 23.16
0.2 50 618 292 15.68 4.60 12.77 3.74 1.96 0.12 7.43 22.22
8 Medium
0.3 75 580 274 15.18 4.45 12.23 3.59 1.90 0.12 7.02 20.99
0.4 100 533 252 14.59 4.28 11.56 3.39 1.82 0.12 6.55 19.56
0.1 25 506 239 14.25 4.18 11.17 3.27 1.78 0.11 6.28 18.77
0.2 50 480 227 13.92 4.08 10.80 3.16 1.74 0.11 6.02 18.00
Minimum
0.3 75 458 216 13.64 4.00 10.47 3.07 1.70 0.11 5.81 17.36
0.4 100 425 201 13.19 3.87 9.98 2.92 1.65 0.10 5.48 16.37
0.1 25 1266 597 29.46 8.64 24.10 7.06 3.68 0.23 13.67 40.85
0.2 50 1209 571 28.06 8.22 23.10 6.77 3.51 0.22 12.53 37.46
Maximum
0.3 75 1141 538 26.37 7.73 21.89 6.42 3.30 0.21 11.22 33.55
0.4 100 1070 505 24.74 7.25 20.68 6.06 3.09 0.20 10.03 29.97
0.1 25 1081 510 24.95 7.31 20.85 6.11 3.12 0.20 10.18 30.42
0.2 50 1038 490 24.17 7.08 20.18 5.91 3.02 0.19 9.61 28.74
10 Medium
0.3 75 993 469 23.40 6.86 19.50 5.71 2.92 0.18 9.08 27.14
0.4 100 936 442 22.50 6.59 18.65 5.47 2.81 0.18 8.47 25.31
0.1 25 874 412 21.59 6.33 17.75 5.20 2.70 0.17 7.87 23.53
0.2 50 834 394 21.04 6.17 17.18 5.03 2.63 0.17 7.52 22.48
Minimum
0.3 75 797 376 20.55 6.02 16.65 4.88 2.57 0.16 7.21 21.56
0.4 100 762 360 20.10 5.89 16.15 4.73 2.51 0.16 6.94 20.73
0.1 25 1436 678 36.47 10.69 28.46 8.34 4.56 0.29 19.66 58.78
0.2 50 1341 633 34.06 9.98 26.77 7.85 4.26 0.27 17.42 52.06
Maximum
0.3 75 1246 588 31.50 9.23 25.00 7.33 3.94 0.25 15.16 45.31
0.4 100 1150 543 29.00 8.50 23.23 6.81 3.62 0.23 13.09 39.12
0.1 25 1229 580 31.04 9.10 24.68 7.23 3.88 0.24 14.77 44.15
0.2 50 1157 546 29.17 8.55 23.36 6.85 3.65 0.23 13.23 39.54
12 Medium
0.3 75 1073 506 27.20 7.97 21.88 6.41 3.40 0.21 11.68 34.92
0.4 100 989 467 25.54 7.48 20.49 6.01 3.19 0.20 10.44 31.22
0.1 25 967 456 25.16 7.37 20.15 5.91 3.14 0.20 10.17 30.39
0.2 50 927 437 24.58 7.20 19.56 5.73 3.07 0.19 9.76 29.16
Minimum
0.3 75 870 411 23.82 6.98 18.74 5.49 2.98 0.19 9.23 27.59
0.4 100 800 378 22.94 6.72 17.75 5.20 2.87 0.18 8.63 25.81
0.1 25 1510 713 32.72 9.59 28.14 8.25 4.09 0.26 6.31 18.86
0.2 50 1416 668 31.11 9.12 26.73 7.83 3.89 0.25 5.77 17.24
Maximum
0.3 75 1313 620 29.49 8.64 25.22 7.39 3.69 0.23 5.24 15.67
0.4 100 1212 572 28.02 8.21 23.77 6.97 3.50 0.22 4.79 14.31
0.1 25 1264 596 28.76 8.43 24.51 7.18 3.60 0.23 5.01 14.99
0.2 50 1205 569 27.93 8.18 23.67 6.94 3.49 0.22 4.76 14.22
15 Medium
0.3 75 1123 530 26.81 7.86 22.50 6.60 3.35 0.21 4.42 13.23
0.4 100 1032 487 25.63 7.51 21.21 6.22 3.20 0.20 4.08 12.20
0.1 25 991 468 25.11 7.36 20.63 6.05 3.14 0.20 3.94 11.76
0.2 50 946 446 24.53 7.19 19.98 5.86 3.07 0.19 3.78 11.29
Minimum
0.3 75 897 423 23.91 7.01 19.27 5.65 2.99 0.19 3.61 10.78
0.4 100 828 391 23.01 6.74 18.26 5.35 2.88 0.18 3.37 10.07
0.1 25 2404 1134 60.59 17.76 47.09 13.80 7.57 0.48 23.46 70.13
0.2 50 2277 1075 58.58 17.17 45.31 13.28 7.32 0.46 22.10 66.05
Maximum
0.3 75 2146 1013 56.23 16.48 43.36 12.71 7.03 0.44 20.55 61.42
0.4 100 2023 955 52.90 15.50 41.08 12.04 6.61 0.42 18.43 55.10
0.1 25 2083 983 54.55 15.99 42.20 12.37 6.82 0.43 19.47 58.20
0.2 50 1998 943 52.20 15.30 40.60 11.90 6.52 0.41 18.00 53.81
18 Medium
0.3 75 1895 894 49.31 14.45 38.64 11.33 6.16 0.39 16.27 48.63
0.4 100 1777 839 46.13 13.52 36.42 10.67 5.77 0.36 14.45 43.20
0.1 25 1690 798 43.95 12.88 34.83 10.21 5.49 0.35 13.26 39.65
0.2 50 1616 763 42.26 12.39 33.54 9.83 5.28 0.33 12.37 36.98
Minimum
0.3 75 1549 731 40.88 11.98 32.41 9.50 5.11 0.32 11.66 34.85
0.4 100 1475 696 39.51 11.58 31.21 9.15 4.94 0.31 10.97 32.80
0.1 25 2533 1195 58.95 17.28 48.21 14.13 7.37 0.46 11.62 34.73
0.2 50 2417 1141 56.10 16.44 46.18 13.54 7.01 0.44 10.63 31.79
Maximum
0.3 75 2282 1077 52.74 15.46 43.79 12.83 6.59 0.42 9.53 28.48
0.4 100 2140 1010 49.49 14.51 41.35 12.12 6.19 0.39 8.51 25.43
0.1 25 2162 1020 49.90 14.63 41.70 12.22 6.24 0.39 8.63 25.81
0.2 50 2076 980 48.33 14.17 40.36 11.83 6.04 0.38 8.16 24.38
21 Medium
0.3 75 1985 937 46.78 13.71 38.98 11.43 5.85 0.37 7.70 23.01
0.4 100 1872 883 44.99 13.19 37.30 10.93 5.62 0.35 7.18 21.46
0.1 25 1747 824 43.16 12.65 35.49 10.40 5.40 0.34 6.67 19.94
0.2 50 1667 787 42.06 12.33 34.34 10.06 5.26 0.33 6.37 19.04
Minimum
0.3 75 1593 752 41.08 12.04 33.28 9.75 5.14 0.32 6.11 18.26
0.4 100 1524 719 40.20 11.78 32.30 9.47 5.02 0.32 5.88 17.56

Data based on 78°F/65°F (25.5°C/18.3°C) air on-coil DBT/WBT, Table 13

42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

17
 SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - District Cooling
DCYP EC 4 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 728 344 17.35 5.08 15.28 4.48 2.17 0.14 10.28 30.72
0.2 50 681 321 16.41 4.81 14.44 4.23 2.05 0.13 9.31 27.84
Maximum
0.3 75 633 299 15.52 4.55 13.60 3.99 1.94 0.12 8.45 25.24
0.4 100 585 276 14.71 4.31 12.78 3.75 1.84 0.12 7.68 22.95
0.1 25 620 293 15.30 4.48 13.38 3.92 1.91 0.12 8.23 24.60
0.2 50 586 277 14.72 4.32 12.80 3.75 1.84 0.12 7.69 23.00
6 Medium
0.3 75 544 257 14.05 4.12 12.09 3.54 1.76 0.11 7.08 21.18
0.4 100 502 237 13.41 3.93 11.39 3.34 1.68 0.11 6.52 19.49
0.1 25 487 230 13.18 3.86 11.13 3.26 1.65 0.10 6.33 18.91
0.2 50 467 220 12.88 3.77 10.80 3.17 1.61 0.10 6.07 18.15
Minimum
0.3 75 440 208 12.47 3.65 10.34 3.03 1.56 0.10 5.73 17.14
0.4 100 405 191 11.93 3.50 9.74 2.85 1.49 0.09 5.30 15.85
0.1 25 768 362 18.21 5.34 16.24 4.76 2.28 0.14 5.82 17.41
0.2 50 724 342 17.50 5.13 15.50 4.54 2.19 0.14 5.43 16.22
Maximum
0.3 75 672 317 16.69 4.89 14.64 4.29 2.09 0.13 4.99 14.92
0.4 100 620 293 15.91 4.66 13.78 4.04 1.99 0.13 4.58 13.70
0.1 25 639 302 16.19 4.75 14.09 4.13 2.02 0.13 4.73 14.14
0.2 50 612 289 15.79 4.63 13.64 4.00 1.97 0.12 4.52 13.52
8 Medium
0.3 75 573 270 15.21 4.46 12.99 3.81 1.90 0.12 4.23 12.65
0.4 100 527 249 14.51 4.25 12.22 3.58 1.81 0.11 3.90 11.65
0.1 25 502 237 14.12 4.14 11.79 3.45 1.77 0.11 3.71 11.10
0.2 50 477 225 13.73 4.02 11.35 3.33 1.72 0.11 3.53 10.56
Minimum
0.3 75 455 215 13.37 3.92 10.96 3.21 1.67 0.11 3.37 10.08
0.4 100 421 199 12.79 3.75 10.35 3.03 1.60 0.10 3.12 9.31
0.1 25 1245 588 32.98 9.67 27.32 8.01 4.12 0.26 21.03 62.86
0.2 50 1185 559 31.33 9.18 26.08 7.64 3.92 0.25 19.21 57.42
Maximum
0.3 75 1117 527 29.44 8.63 24.65 7.22 3.68 0.23 17.21 51.43
0.4 100 1050 495 27.63 8.10 23.25 6.81 3.45 0.22 15.38 45.97
0.1 25 1068 504 28.10 8.24 23.62 6.92 3.51 0.22 15.85 47.38
0.2 50 1026 484 27.01 7.92 22.76 6.67 3.38 0.21 14.78 44.17
10 Medium
0.3 75 979 462 25.86 7.58 21.82 6.40 3.23 0.20 13.69 40.92
0.4 100 922 435 24.67 7.23 20.75 6.08 3.08 0.19 12.59 37.64
0.1 25 865 408 23.69 6.94 19.77 5.79 2.96 0.19 11.72 35.03
0.2 50 826 390 23.05 6.75 19.10 5.60 2.88 0.18 11.17 33.38
Minimum
0.3 75 791 373 22.49 6.59 18.51 5.42 2.81 0.18 10.70 31.98
0.4 100 756 357 21.95 6.43 17.92 5.25 2.74 0.17 10.25 30.63
0.1 25 1398 660 31.82 9.33 28.62 8.39 3.98 0.25 6.86 20.49
0.2 50 1307 617 30.04 8.81 27.02 7.92 3.76 0.24 6.19 18.50
Maximum
0.3 75 1217 574 28.42 8.33 25.47 7.46 3.55 0.22 5.61 16.76
0.4 100 1122 529 26.83 7.86 23.86 6.99 3.35 0.21 5.06 15.13
0.1 25 1209 571 28.28 8.29 25.33 7.42 3.53 0.22 5.56 16.62
0.2 50 1135 536 27.04 7.92 24.08 7.06 3.38 0.21 5.13 15.35
12 Medium
0.3 75 1053 497 25.73 7.54 22.71 6.66 3.22 0.20 4.70 14.05
0.4 100 973 459 24.51 7.18 21.38 6.27 3.06 0.19 4.31 12.89
0.1 25 959 453 24.29 7.12 21.15 6.20 3.04 0.19 4.25 12.69
0.2 50 918 433 23.68 6.94 20.47 6.00 2.96 0.19 4.06 12.13
Minimum
0.3 75 859 405 22.80 6.68 19.48 5.71 2.85 0.18 3.79 11.34
0.4 100 790 373 21.76 6.38 18.32 5.37 2.72 0.17 3.49 10.44
0.1 25 1481 699 36.07 10.57 31.47 9.23 4.51 0.28 9.34 27.91
0.2 50 1385 654 34.14 10.01 29.74 8.72 4.27 0.27 8.47 25.32
Maximum
0.3 75 1287 607 32.34 9.48 28.02 8.21 4.04 0.26 7.69 23.00
0.4 100 1189 561 30.68 8.99 26.34 7.72 3.83 0.24 7.01 20.95
0.1 25 1251 590 31.71 9.29 27.40 8.03 3.96 0.25 7.43 22.21
0.2 50 1188 561 30.66 8.99 26.33 7.72 3.83 0.24 7.00 20.92
15 Medium
0.3 75 1105 521 29.34 8.60 24.92 7.31 3.67 0.23 6.47 19.35
0.4 100 1017 480 27.99 8.20 23.45 6.87 3.50 0.22 5.95 17.80
0.1 25 982 463 27.45 8.05 22.86 6.70 3.43 0.22 5.76 17.20
0.2 50 940 444 26.82 7.86 22.15 6.49 3.35 0.21 5.52 16.50
Minimum
0.3 75 889 420 26.04 7.63 21.28 6.24 3.25 0.21 5.24 15.66
0.4 100 820 387 24.95 7.31 20.08 5.89 3.12 0.20 4.86 14.52
0.1 25 2347 1108 57.32 16.80 49.27 14.44 7.16 0.45 12.75 38.11
0.2 50 2223 1049 54.20 15.89 46.84 13.73 6.78 0.43 11.55 34.51
Maximum
0.3 75 2098 990 50.93 14.93 44.32 12.99 6.37 0.40 10.34 30.90
0.4 100 1987 938 48.35 14.17 42.19 12.37 6.04 0.38 9.43 28.18
0.1 25 2054 969 49.82 14.60 43.44 12.73 6.23 0.39 9.94 29.71
0.2 50 1966 928 47.91 14.04 41.81 12.25 5.99 0.38 9.27 27.72
18 Medium
0.3 75 1860 878 45.77 13.42 39.89 11.69 5.72 0.36 8.55 25.57
0.4 100 1745 823 43.63 12.79 37.87 11.10 5.45 0.34 7.86 23.49
0.1 25 1671 789 42.33 12.41 36.59 10.72 5.29 0.33 7.45 22.26
0.2 50 1600 755 41.14 12.06 35.37 10.37 5.14 0.32 7.08 21.16
Minimum
0.3 75 1535 724 40.09 11.75 34.27 10.04 5.01 0.32 6.76 20.21
0.4 100 1459 689 38.90 11.40 32.99 9.67 4.86 0.31 6.41 19.16
0.1 25 2489 1175 58.05 17.02 51.50 15.09 7.26 0.46 7.98 23.85
0.2 50 2370 1118 55.53 16.27 49.32 14.46 6.94 0.44 7.37 22.04
Maximum
0.3 75 2235 1055 52.85 15.49 46.91 13.75 6.61 0.42 6.75 20.19
0.4 100 2099 991 50.36 14.76 44.54 13.05 6.29 0.40 6.20 18.52
0.1 25 2135 1008 51.00 14.95 45.16 13.24 6.38 0.40 6.34 18.95
0.2 50 2052 968 49.53 14.52 43.73 12.82 6.19 0.39 6.02 17.99
21 Medium
0.3 75 1958 924 47.94 14.05 42.13 12.35 5.99 0.38 5.68 16.97
0.4 100 1843 870 46.07 13.50 40.20 11.78 5.76 0.36 5.29 15.81
0.1 25 1731 817 44.32 12.99 38.32 11.23 5.54 0.35 4.94 14.76
0.2 50 1652 780 43.11 12.64 37.01 10.85 5.39 0.34 4.70 14.06
Minimum
0.3 75 1581 746 42.05 12.32 35.82 10.50 5.26 0.33 4.50 13.45
0.4 100 1511 713 40.99 12.01 34.64 10.15 5.12 0.32 4.30 12.85

Data based on 76°F/63°F (24.4°C/17.2°C) air on-coil DBT/WBT, Table 14

42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

18
SKM Fan Coil Units
Hi-Static FCU (EC)

Airflow Total Sensible Water Water

ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 728 344 20.94 6.14 16.36 4.80 2.62 0.17 14.33 42.85
0.2 50 681 321 19.54 5.73 15.36 4.50 2.44 0.15 12.68 37.91
Maximum
0.3 75 633 299 18.30 5.36 14.40 4.22 2.29 0.14 11.30 33.77
0.4 100 585 276 17.31 5.07 13.53 3.97 2.16 0.14 10.24 30.59
0.1 25 620 293 18.02 5.28 14.16 4.15 2.25 0.14 11.00 32.87
0.2 50 586 277 17.33 5.08 13.55 3.97 2.17 0.14 10.26 30.66
6 Medium
0.3 75 544 257 16.52 4.84 12.80 3.75 2.07 0.13 9.43 28.19
0.4 100 502 237 15.77 4.62 12.07 3.54 1.97 0.12 8.68 25.95
0.1 25 487 230 15.51 4.54 11.82 3.46 1.94 0.12 8.43 25.19
0.2 50 467 220 15.16 4.44 11.47 3.36 1.89 0.12 8.10 24.20
Minimum
0.3 75 440 208 14.69 4.31 11.00 3.22 1.84 0.12 7.66 22.90
0.4 100 405 191 14.07 4.13 10.39 3.04 1.76 0.11 7.10 21.23
0.1 25 768 362 21.39 6.27 17.15 5.03 2.67 0.17 7.75 23.16
0.2 50 724 342 20.53 6.02 16.36 4.80 2.57 0.16 7.20 21.52
Maximum
0.3 75 672 317 19.56 5.73 15.46 4.53 2.44 0.15 6.61 19.75
0.4 100 620 293 18.64 5.46 14.56 4.27 2.33 0.15 6.07 18.14
0.1 25 639 302 18.97 5.56 14.89 4.36 2.37 0.15 6.26 18.71
0.2 50 612 289 18.50 5.42 14.42 4.23 2.31 0.15 5.99 17.90
8 Medium
0.3 75 573 270 17.83 5.23 13.75 4.03 2.23 0.14 5.61 16.77
0.4 100 527 249 17.04 4.99 12.96 3.80 2.13 0.13 5.18 15.48
0.1 25 502 237 16.60 4.87 12.52 3.67 2.08 0.13 4.94 14.78
0.2 50 477 225 16.16 4.74 12.08 3.54 2.02 0.13 4.71 14.08
Minimum
0.3 75 455 215 15.75 4.62 11.68 3.42 1.97 0.12 4.50 13.46
0.4 100 421 199 15.10 4.42 11.05 3.24 1.89 0.12 4.18 12.49
0.1 25 1245 588 39.87 11.69 29.44 8.63 4.98 0.31 29.42 87.93
0.2 50 1185 559 38.43 11.26 28.31 8.30 4.80 0.30 27.56 82.37
Maximum
0.3 75 1117 527 36.40 10.67 26.86 7.87 4.55 0.29 25.04 74.84
0.4 100 1050 495 34.09 9.99 25.30 7.41 4.26 0.27 22.29 66.64
0.1 25 1068 504 34.70 10.17 25.72 7.54 4.34 0.27 23.01 68.78
0.2 50 1026 484 33.28 9.75 24.74 7.25 4.16 0.26 21.37 63.87
10 Medium
0.3 75 979 462 31.75 9.31 23.68 6.94 3.97 0.25 19.66 58.77
0.4 100 922 435 30.02 8.80 22.43 6.57 3.75 0.24 17.81 53.25
0.1 25 865 408 28.48 8.35 21.24 6.23 3.56 0.22 16.22 48.49
0.2 50 826 390 27.52 8.07 20.47 6.00 3.44 0.22 15.28 45.67
Minimum
0.3 75 791 373 26.74 7.84 19.80 5.80 3.34 0.21 14.52 43.41
0.4 100 756 357 26.03 7.63 19.15 5.61 3.25 0.21 13.84 41.37
0.1 25 1398 660 37.85 11.09 30.37 8.90 4.73 0.30 9.33 27.89
0.2 50 1307 617 35.52 10.41 28.59 8.38 4.44 0.28 8.33 24.91
Maximum
0.3 75 1217 574 33.46 9.81 26.90 7.88 4.18 0.26 7.50 22.41
0.4 100 1122 529 31.49 9.23 25.18 7.38 3.94 0.25 6.73 20.12
0.1 25 1209 571 33.28 9.76 26.75 7.84 4.16 0.26 7.43 22.20
0.2 50 1135 536 31.75 9.31 25.41 7.45 3.97 0.25 6.83 20.41
12 Medium
0.3 75 1053 497 30.16 8.84 23.97 7.02 3.77 0.24 6.23 18.64
0.4 100 973 459 28.71 8.41 22.58 6.62 3.59 0.23 5.71 17.07
0.1 25 959 453 28.46 8.34 22.34 6.55 3.56 0.22 5.62 16.81
0.2 50 918 433 27.75 8.13 21.63 6.34 3.47 0.22 5.38 16.07
Minimum
0.3 75 859 405 26.74 7.84 20.62 6.04 3.34 0.21 5.03 15.05
0.4 100 790 373 25.55 7.49 19.43 5.69 3.19 0.20 4.64 13.88
0.1 25 1481 699 43.93 12.88 33.88 9.93 5.49 0.35 13.25 39.60
0.2 50 1385 654 41.01 12.02 31.80 9.32 5.13 0.32 11.73 35.06
Maximum
0.3 75 1287 607 38.29 11.22 29.76 8.72 4.79 0.30 10.38 31.03
0.4 100 1189 561 36.15 10.59 27.93 8.19 4.52 0.29 9.37 28.02
0.1 25 1251 590 37.40 10.96 29.05 8.51 4.67 0.29 9.96 29.76
0.2 50 1188 561 36.13 10.59 27.91 8.18 4.52 0.28 9.36 27.99
15 Medium
0.3 75 1105 521 34.56 10.13 26.45 7.75 4.32 0.27 8.65 25.87
0.4 100 1017 480 32.98 9.67 24.92 7.30 4.12 0.26 7.97 23.81
0.1 25 982 463 32.36 9.49 24.31 7.13 4.05 0.26 7.70 23.03
0.2 50 940 444 31.64 9.27 23.59 6.91 3.95 0.25 7.40 22.12
Minimum
0.3 75 889 420 30.75 9.01 22.70 6.65 3.84 0.24 7.03 21.03
0.4 100 820 387 29.51 8.65 21.48 6.30 3.69 0.23 6.54 19.56
0.1 25 2347 1108 69.63 20.41 53.02 15.54 8.70 0.55 18.01 53.85
0.2 50 2223 1049 66.21 19.41 50.53 14.81 8.28 0.52 16.47 49.24
Maximum
0.3 75 2098 990 62.42 18.30 47.86 14.03 7.80 0.49 14.84 44.35
0.4 100 1987 938 58.96 17.28 45.44 13.32 7.37 0.46 13.40 40.07
0.1 25 2054 969 61.05 17.89 46.91 13.75 7.63 0.48 14.26 42.63
0.2 50 1966 928 58.30 17.09 44.98 13.18 7.29 0.46 13.14 39.28
18 Medium
0.3 75 1860 878 55.08 16.14 42.69 12.51 6.88 0.43 11.88 35.51
0.4 100 1745 823 51.82 15.19 40.27 11.80 6.48 0.41 10.66 31.87
0.1 25 1671 789 49.93 14.63 38.79 11.37 6.24 0.39 9.98 29.83
0.2 50 1600 755 48.49 14.21 37.50 10.99 6.06 0.38 9.47 28.32
Minimum
0.3 75 1535 724 47.23 13.84 36.35 10.65 5.90 0.37 9.04 27.03
0.4 100 1459 689 45.81 13.43 35.01 10.26 5.73 0.36 8.57 25.61
0.1 25 2489 1175 70.03 20.53 55.07 16.14 8.75 0.55 11.14 33.30
0.2 50 2370 1118 66.48 19.49 52.55 15.40 8.31 0.52 10.15 30.35
Maximum
0.3 75 2235 1055 62.51 18.32 49.69 14.56 7.81 0.49 9.10 27.20
0.4 100 2099 991 59.36 17.40 47.12 13.81 7.42 0.47 8.30 24.81
0.1 25 2135 1008 60.17 17.63 47.79 14.01 7.52 0.47 8.50 25.42
0.2 50 2052 968 58.33 17.10 46.26 13.56 7.29 0.46 8.05 24.06
21 Medium
0.3 75 1958 924 56.37 16.52 44.55 13.06 7.05 0.44 7.57 22.64
0.4 100 1843 870 54.11 15.86 42.50 12.46 6.76 0.43 7.04 21.05
0.1 25 1731 817 52.04 15.25 40.54 11.88 6.50 0.41 6.57 19.64
0.2 50 1652 780 50.63 14.84 39.17 11.48 6.33 0.40 6.26 18.70
Minimum
0.3 75 1581 746 49.39 14.47 37.95 11.12 6.17 0.39 5.99 17.89
0.4 100 1511 713 48.17 14.12 36.74 10.77 6.02 0.38 5.73 17.12

Table 15
Data based on 78°F/65°F (25.5°C/18.3°C) air on-coil DBT/WBT,
42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

19
 SKM Fan Coil Units
Hi-Static FCU (EC)
Capacity Ratings - District Cooling
DCYP EC 6 ROWS
Airflow Total Sensible Water Water
ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 697 329 21.69 6.36 17.49 5.12 2.71 0.17 10.12 30.24
0.2 50 653 308 20.59 6.03 16.52 4.84 2.57 0.16 9.22 27.57
Maximum
0.3 75 608 287 19.52 5.72 15.56 4.56 2.44 0.15 8.40 25.10
0.4 100 561 265 18.45 5.41 14.57 4.27 2.31 0.15 7.60 22.72
0.1 25 604 285 19.42 5.69 15.47 4.54 2.43 0.15 8.33 24.89
0.2 50 568 268 18.60 5.45 14.72 4.31 2.33 0.15 7.72 23.07
6 Medium
0.3 75 527 249 17.69 5.19 13.86 4.06 2.21 0.14 7.06 21.11
0.4 100 487 230 16.82 4.93 13.03 3.82 2.10 0.13 6.46 19.30
0.1 25 480 227 16.66 4.88 12.88 3.77 2.08 0.13 6.35 18.99
0.2 50 459 217 16.19 4.75 12.44 3.65 2.02 0.13 6.04 18.06
Minimum
0.3 75 431 203 15.56 4.56 11.84 3.47 1.94 0.12 5.63 16.83
0.4 100 397 187 14.76 4.33 11.11 3.26 1.85 0.12 5.13 15.35
0.1 25 746 352 24.94 7.31 19.50 5.71 3.12 0.20 14.17 42.37
0.2 50 699 330 23.75 6.96 18.46 5.41 2.97 0.19 13.00 38.86
Maximum
0.3 75 649 306 22.55 6.61 17.38 5.09 2.82 0.18 11.87 35.47
0.4 100 601 284 21.43 6.28 16.36 4.79 2.68 0.17 10.85 32.43
0.1 25 629 297 22.08 6.47 16.95 4.97 2.76 0.17 11.43 34.18
0.2 50 599 283 21.38 6.27 16.31 4.78 2.67 0.17 10.81 32.30
8 Medium
0.3 75 558 263 20.44 5.99 15.44 4.53 2.55 0.16 9.98 29.84
0.4 100 514 243 19.41 5.69 14.50 4.25 2.43 0.15 9.12 27.25
0.1 25 494 233 18.94 5.55 14.06 4.12 2.37 0.15 8.72 26.08
0.2 50 472 223 18.40 5.39 13.58 3.98 2.30 0.15 8.29 24.79
Minimum
0.3 75 448 211 17.80 5.22 13.05 3.82 2.22 0.14 7.82 23.38
0.4 100 414 195 16.90 4.95 12.27 3.60 2.11 0.13 7.14 21.34
0.1 25 1200 566 37.78 11.07 30.21 8.85 4.72 0.30 13.06 39.05
0.2 50 1139 537 36.00 10.55 28.78 8.44 4.50 0.28 12.00 35.86
Maximum
0.3 75 1075 507 34.27 10.04 27.33 8.01 4.28 0.27 11.00 32.87
0.4 100 1015 479 32.74 9.60 26.01 7.62 4.09 0.26 10.15 30.33
0.1 25 1044 493 33.47 9.81 26.65 7.81 4.18 0.26 10.55 31.53
0.2 50 1002 473 32.42 9.50 25.73 7.54 4.05 0.26 9.97 29.81
10 Medium
0.3 75 951 449 31.19 9.14 24.63 7.22 3.90 0.25 9.32 27.85
0.4 100 895 422 29.89 8.76 23.44 6.87 3.74 0.24 8.64 25.83
0.1 25 849 401 28.85 8.46 22.47 6.59 3.61 0.23 8.12 24.27
0.2 50 812 383 28.02 8.21 21.69 6.36 3.50 0.22 7.71 23.05
Minimum
0.3 75 779 368 27.29 8.00 21.00 6.16 3.41 0.22 7.36 21.99
0.4 100 743 351 26.48 7.76 20.24 5.93 3.31 0.21 6.98 20.86
0.1 25 1332 629 39.89 11.69 32.70 9.59 4.99 0.31 6.74 20.14
0.2 50 1248 589 37.83 11.09 30.90 9.06 4.73 0.30 6.13 18.33
Maximum
0.3 75 1164 549 35.87 10.51 29.12 8.54 4.48 0.28 5.58 16.69
0.4 100 1068 504 33.74 9.89 27.12 7.95 4.22 0.27 5.01 14.97
0.1 25 1168 551 35.96 10.54 29.20 8.56 4.50 0.28 5.61 16.76
0.2 50 1093 516 34.28 10.05 27.64 8.10 4.29 0.27 5.15 15.40
12 Medium
0.3 75 1016 479 32.61 9.56 26.05 7.64 4.08 0.26 4.71 14.09
0.4 100 940 444 30.98 9.08 24.48 7.18 3.87 0.24 4.31 12.87
0.1 25 944 445 31.06 9.10 24.57 7.20 3.88 0.24 4.33 12.93
0.2 50 899 424 30.10 8.82 23.64 6.93 3.76 0.24 4.09 12.23
Minimum
0.3 75 837 395 28.75 8.43 22.35 6.55 3.59 0.23 3.77 11.28
0.4 100 771 364 27.28 8.00 20.95 6.14 3.41 0.22 3.44 10.28
0.1 25 1423 672 45.10 13.22 36.06 10.57 5.64 0.36 9.15 27.35
0.2 50 1330 628 42.75 12.53 34.02 9.97 5.34 0.34 8.32 24.88
Maximum
0.3 75 1239 585 40.57 11.89 32.07 9.40 5.07 0.32 7.59 22.68
0.4 100 1145 540 38.42 11.26 30.08 8.82 4.80 0.30 6.89 20.60
0.1 25 1224 578 40.22 11.79 31.75 9.31 5.03 0.32 7.47 22.34
0.2 50 1154 545 38.62 11.32 30.27 8.87 4.83 0.30 6.96 20.79
15 Medium
0.3 75 1071 505 36.77 10.78 28.53 8.36 4.60 0.29 6.38 19.06
0.4 100 990 467 34.96 10.25 26.83 7.86 4.37 0.28 5.83 17.43
0.1 25 967 456 34.44 10.10 26.34 7.72 4.31 0.27 5.68 16.98
0.2 50 927 437 33.54 9.83 25.50 7.47 4.19 0.26 5.42 16.20
Minimum
0.3 75 872 411 32.27 9.46 24.32 7.13 4.03 0.25 5.06 15.13
0.4 100 803 379 30.60 8.97 22.81 6.68 3.83 0.24 4.61 13.78
0.1 25 2242 1058 67.30 19.73 54.95 16.11 8.41 0.53 8.26 24.68
0.2 50 2126 1003 64.11 18.79 52.33 15.34 8.01 0.51 7.58 22.64
Maximum
0.3 75 2018 952 61.30 17.97 49.95 14.64 7.66 0.48 7.00 20.91
0.4 100 1926 909 59.01 17.30 47.95 14.05 7.38 0.47 6.54 19.55
0.1 25 1995 941 60.72 17.80 49.45 14.49 7.59 0.48 6.88 20.56
0.2 50 1902 898 58.43 17.13 47.44 13.90 7.30 0.46 6.43 19.21
18 Medium
0.3 75 1796 848 55.93 16.39 45.18 13.24 6.99 0.44 5.95 17.78
0.4 100 1688 797 53.48 15.67 42.92 12.58 6.68 0.42 5.49 16.42
0.1 25 1636 772 52.33 15.34 41.83 12.26 6.54 0.41 5.29 15.80
0.2 50 1571 741 50.90 14.92 40.49 11.87 6.36 0.40 5.03 15.04
Minimum
0.3 75 1505 710 49.47 14.50 39.12 11.47 6.18 0.39 4.78 14.30
0.4 100 1425 672 47.74 13.99 37.46 10.98 5.97 0.38 4.49 13.43
0.1 25 2400 1133 75.57 22.15 60.42 17.71 9.45 0.60 10.98 32.81
0.2 50 2278 1075 72.00 21.10 57.56 16.87 9.00 0.57 10.07 30.11
Maximum
0.3 75 2151 1015 68.57 20.10 54.69 16.03 8.57 0.54 9.24 27.62
0.4 100 2030 958 65.48 19.19 52.02 15.25 8.19 0.52 8.52 25.46
0.1 25 2087 985 66.92 19.61 53.27 15.61 8.36 0.53 8.85 26.45
0.2 50 2003 945 64.82 19.00 51.44 15.08 8.10 0.51 8.36 25.00
21 Medium
0.3 75 1903 898 62.41 18.29 49.28 14.45 7.80 0.49 7.82 23.38
0.4 100 1789 844 59.76 17.52 46.86 13.74 7.47 0.47 7.24 21.66
0.1 25 1698 801 57.70 16.91 44.95 13.17 7.21 0.46 6.81 20.35
0.2 50 1624 766 56.05 16.43 43.39 12.72 7.01 0.44 6.47 19.33
Minimum
0.3 75 1557 735 54.55 15.99 41.98 12.31 6.82 0.43 6.16 18.43
0.4 100 1486 701 52.96 15.52 40.49 11.87 6.62 0.42 5.85 17.48

Table 16
Data based on 76°F/63°F (24.4°C/17.2°C) air on-coil DBT/WBT,
42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

20
SKM Fan Coil Units
Hi-Static FCU (EC)

Airflow Total Sensible Water Water

ESP
Size Speed Rate Capacity Capacity Flow Rate Pressure Drop
inWg Pa cfm l/s MBh kW MBh kW gpm l/s ftWg kPa
0.1 25 697 329 25.56 7.49 18.67 5.47 3.20 0.20 13.51 40.40
0.2 50 653 308 24.12 7.07 17.59 5.16 3.01 0.19 12.20 36.46
Maximum
0.3 75 608 287 22.81 6.69 16.56 4.85 2.85 0.18 11.06 33.05
0.4 100 561 265 21.53 6.31 15.50 4.54 2.69 0.17 9.98 29.84
0.1 25 604 285 22.70 6.65 16.47 4.83 2.84 0.18 10.96 32.76
0.2 50 568 268 21.72 6.37 15.66 4.59 2.71 0.17 10.14 30.30
6 Medium
0.3 75 527 249 20.64 6.05 14.76 4.32 2.58 0.16 9.26 27.69
0.4 100 487 230 19.60 5.74 13.88 4.07 2.45 0.15 8.46 25.29
0.1 25 480 227 19.42 5.69 13.73 4.02 2.43 0.15 8.32 24.88
0.2 50 459 217 18.88 5.53 13.27 3.89 2.36 0.15 7.92 23.66
Minimum
0.3 75 431 203 18.14 5.32 12.65 3.71 2.27 0.14 7.38 22.06
0.4 100 397 187 17.22 5.05 11.88 3.48 2.15 0.14 6.73 20.12
0.1 25 746 352 29.99 8.79 21.13 6.19 3.75 0.24 19.61 58.63
0.2 50 699 330 28.24 8.28 19.89 5.83 3.53 0.22 17.64 52.73
Maximum
0.3 75 649 306 26.54 7.78 18.63 5.46 3.32 0.21 15.81 47.27
0.4 100 601 284 25.07 7.35 17.49 5.13 3.13 0.20 14.30 42.76
0.1 25 629 297 25.91 7.59 18.15 5.32 3.24 0.20 15.16 45.31
0.2 50 599 283 25.01 7.33 17.45 5.11 3.13 0.20 14.25 42.59
8 Medium
0.3 75 558 263 23.90 7.01 16.53 4.85 2.99 0.19 13.15 39.30
0.4 100 514 243 22.70 6.65 15.54 4.56 2.84 0.18 12.00 35.88
0.1 25 494 233 22.14 6.49 15.09 4.42 2.77 0.17 11.49 34.33
0.2 50 472 223 21.51 6.30 14.58 4.27 2.69 0.17 10.92 32.63
Minimum
0.3 75 448 211 20.80 6.10 14.02 4.11 2.60 0.16 10.29 30.76
0.4 100 414 195 19.74 5.79 13.20 3.87 2.47 0.16 9.39 28.06
0.1 25 1200 566 45.51 13.34 32.68 9.58 5.69 0.36 18.15 54.25
0.2 50 1139 537 43.14 12.64 31.05 9.10 5.39 0.34 16.51 49.36
Maximum
0.3 75 1075 507 40.70 11.93 29.34 8.60 5.09 0.32 14.89 44.52
0.4 100 1015 479 38.51 11.29 27.78 8.14 4.81 0.30 13.51 40.39
0.1 25 1044 493 39.55 11.59 28.53 8.36 4.94 0.31 14.16 42.33
0.2 50 1002 473 38.06 11.15 27.45 8.05 4.76 0.30 13.23 39.55
10 Medium
0.3 75 951 449 36.50 10.70 26.25 7.69 4.56 0.29 12.29 36.73
0.4 100 895 422 34.93 10.24 24.98 7.32 4.37 0.28 11.38 34.00
0.1 25 849 401 33.69 9.87 23.96 7.02 4.21 0.27 10.67 31.90
0.2 50 812 383 32.71 9.59 23.14 6.78 4.09 0.26 10.13 30.28
Minimum
0.3 75 779 368 31.85 9.33 22.41 6.57 3.98 0.25 9.66 28.88
0.4 100 743 351 30.90 9.06 21.62 6.34 3.86 0.24 9.16 27.39
0.1 25 1332 629 46.90 13.75 34.81 10.20 5.86 0.37 8.98 26.83
0.2 50 1248 589 44.32 12.99 32.83 9.62 5.54 0.35 8.12 24.27
Maximum
0.3 75 1164 549 41.91 12.28 30.92 9.06 5.24 0.33 7.35 21.98
0.4 100 1068 504 39.32 11.52 28.79 8.44 4.91 0.31 6.57 19.63
0.1 25 1168 551 42.02 12.32 31.01 9.09 5.25 0.33 7.39 22.08
0.2 50 1093 516 39.98 11.72 29.34 8.60 5.00 0.32 6.76 20.22
12 Medium
0.3 75 1016 479 37.97 11.13 27.66 8.11 4.75 0.30 6.17 18.46
0.4 100 940 444 36.05 10.57 26.01 7.62 4.51 0.28 5.63 16.83
0.1 25 944 445 36.15 10.59 26.10 7.65 4.52 0.29 5.66 16.91
0.2 50 899 424 35.02 10.26 25.12 7.36 4.38 0.28 5.35 15.99
Minimum
0.3 75 837 395 33.45 9.80 23.78 6.97 4.18 0.26 4.93 14.74
0.4 100 771 364 31.75 9.31 22.33 6.54 3.97 0.25 4.50 13.44
0.1 25 1423 672 53.45 15.67 38.66 11.33 6.68 0.42 12.36 36.95
0.2 50 1330 628 50.09 14.68 36.26 10.63 6.26 0.40 11.02 32.94
Maximum
0.3 75 1239 585 47.44 13.91 34.16 10.01 5.93 0.37 10.01 29.92
0.4 100 1145 540 44.87 13.15 32.05 9.39 5.61 0.35 9.07 27.10
0.1 25 1224 578 47.02 13.78 33.82 9.91 5.88 0.37 9.85 29.45
0.2 50 1154 545 45.11 13.22 32.25 9.45 5.64 0.36 9.15 27.36
15 Medium
0.3 75 1071 505 42.91 12.58 30.42 8.91 5.36 0.34 8.38 25.04
0.4 100 990 467 40.79 11.96 28.63 8.39 5.10 0.32 7.66 22.90
0.1 25 967 456 40.19 11.78 28.13 8.24 5.02 0.32 7.46 22.31
0.2 50 927 437 39.13 11.47 27.24 7.98 4.89 0.31 7.12 21.28
Minimum
0.3 75 872 411 37.65 11.04 26.01 7.62 4.71 0.30 6.65 19.87
0.4 100 803 379 35.72 10.47 24.43 7.16 4.46 0.28 6.06 18.11
0.1 25 2242 1058 79.95 23.43 58.84 17.25 9.99 0.63 11.21 33.50
0.2 50 2126 1003 75.63 22.17 55.83 16.36 9.45 0.60 10.16 30.36
Maximum
0.3 75 2018 952 72.03 21.11 53.18 15.59 9.00 0.57 9.31 27.84
0.4 100 1926 909 69.18 20.28 51.00 14.95 8.65 0.55 8.67 25.91
0.1 25 1995 941 71.30 20.90 52.63 15.43 8.91 0.56 9.15 27.34
0.2 50 1902 898 68.45 20.06 50.44 14.78 8.56 0.54 8.51 25.43
18 Medium
0.3 75 1796 848 65.38 19.16 48.01 14.07 8.17 0.52 7.84 23.44
0.4 100 1688 797 62.40 18.29 45.59 13.36 7.80 0.49 7.22 21.58
0.1 25 1636 772 61.01 17.88 44.44 13.03 7.63 0.48 6.94 20.74
0.2 50 1571 741 59.31 17.38 43.01 12.61 7.41 0.47 6.60 19.73
Minimum
0.3 75 1505 710 57.62 16.89 41.58 12.19 7.20 0.45 6.27 18.74
0.4 100 1425 672 55.58 16.29 39.84 11.68 6.95 0.44 5.88 17.58
0.1 25 2400 1133 91.03 26.68 65.37 19.16 11.38 0.72 15.26 45.63
0.2 50 2278 1075 86.28 25.29 62.10 18.20 10.79 0.68 13.88 41.50
Maximum
0.3 75 2151 1015 81.43 23.87 58.71 17.21 10.18 0.64 12.53 37.45
0.4 100 2030 958 77.02 22.57 55.57 16.29 9.63 0.61 11.35 33.93
0.1 25 2087 985 79.06 23.17 57.04 16.72 9.88 0.62 11.89 35.54
0.2 50 2003 945 76.08 22.30 54.88 16.09 9.51 0.60 11.11 33.20
21 Medium
0.3 75 1903 898 73.02 21.40 52.52 15.39 9.13 0.58 10.33 30.87
0.4 100 1789 844 69.84 20.47 49.94 14.64 8.73 0.55 9.55 28.53
0.1 25 1698 801 67.38 19.75 47.91 14.04 8.42 0.53 8.96 26.78
0.2 50 1624 766 65.42 19.18 46.28 13.56 8.18 0.52 8.50 25.42
Minimum
0.3 75 1557 735 63.67 18.66 44.80 13.13 7.96 0.50 8.10 24.22
0.4 100 1486 701 61.81 18.12 43.23 12.67 7.73 0.49 7.69 22.98

Table 17
Data based on 78°F/65°F (25.5°C/18.3°C) air on-coil DBT/WBT,
42°F/58°F (5.5°C/14.4°C) entering/leaving chilled water temperature

21
 SKM Fan Coil Units
Hi-Static FCU (EC)
Control System Description

Control System Operation

- MP1: 2-pipe system with modulating valve
Thermostat modulates an electric 2-way or 3-way motorized chilled water valve according to the set point.
The fan runs between minimum and maximum speed set in the thermostat and according to the cooling demand.
MCB1 TFR MCB2
L

220~ 240 V

24 V
POWER SUPPLY
220~240V / 1PH / 50~60Hz N
E
THERMOSTAT
E ( OPTION )

G X1 M X2 D1 GND

G0 Y50 Y10 Y20

BLUE

BLUE
BLACK

YELLOW
YLW / GRN

+10V/PWM

TACHO
+10V

GND

MOTOR TERMINALS
PE

Y G0 G
N

Figure 4 ELECTRIC COOLING VALVE

( BY OTHERS )

Notes:
Above wiring from factory is provided only if CHTS option is ordered, or else all the required signals and controls (incloding 0-10V
DC signals for CHTS fan to be provided at site by others.

- MP2: 4-pipe system with modulating valve

Thermostat modulates electric 2-way or 3-way motorized hot or chilled water valve to maintain the desired temperature.
The fan runs between minimum and maximum speed set in the thermostat and according to the cooling or heating demand.
MCB1 TFR MCB2
L
220~ 240 V

24 V

POWER SUPPLY
220~240V / 1PH / 50~60Hz N
E
THERMOSTAT
E ( OPTION )

G X1 M X2 D1 GND

G0 Y50 Y10 Y20

YLW / GRN

BLUE

BLACK

BLUE

YELLOW
+10V/PWM

Figure 5
+10V

GND

TACHO

MOTOR TERMINALS
PE

Y G0 G Y G0 G
N

ELECTRIC COOLING VALVE ELECTRIC HEATING VALVE

Notes: ( BY OTHERS ) ( BY OTHERS )

Above wiring from factory is provided only if CHTS option is ordered, or else all the required signals and controls (including 0-10V
DC signals for CHTS fan to be provided at site by others.

22
SKM Fan Coil Units
Hi-Static FCU (EC)

Selection Control Packages

SKM provides a variety of control options, a few of which are
Selection Considerations mentioned below. Please consult SKM sales department for
other control applications.
In selecting Hi - Static Fan Coil units for a specific application
the factors to be considered should include:
Control System
• Available space for the unit including floor to ceiling height.
• Type of application ( Standard / District cooling). The control systems for SKM Hi - Static FCUs can be selected
provided the application is identified for Cooling and/or Heating.
• Presence of high sensible or peripheral loads in space.
• Functionality of intended space usage.
The control system can be:
• Availability of access for pipes, drains and power.
• Compatibility with intended space finish. • 2-pipe with modulating valve (Code MP1)
• Fresh air and ventilation requirements. • 4-pipe with modulating valve (Code MP2)
• Noise level desired at peak or part load operations.
• Control system desired . Control valves in the control system are available in 2-way and
3-way modulating versions with compression ends for easy field
• Economy of layout.
installation and replacement.
Once a particular model or models in the Hi - Static series is
selected after consideration of the above factors, it is necessary
to select the unit and coil size to match. It is possible to obtain
different unit size with or without different coil depths to meet Valve Packages
given design parameters.
SKM offers a wide variety of optional valve packages
The correct unit with correct coil size is obtained only when (Types1 to Type8), shown in Figure 6, that can suit practically
required cfm at defined speed; i.e. Maximum, Medium or Minimum any application.
to meet sensible load of the space is matched to the correct coil
providing the required sensible cooling or outlet temperature Any one of the following options may be chosen, considering
at given flow rate and design temperature rise with the unit application requirements:
operating at functional sound levels.To achieve this the engineer
or designer must not only check aesthetic needs but also space 1. Factory furnished and installed as a complete package.
limitations, psychrometric feasibility, circulation and ventilation, Specify Type number.
room acoustical effect, control system, piping accesses including
overall chilled water circuits and effect of diversity on same. 2. Furnished by the factory and field installed by the customer.
Add prefix C to the valve package type; e.g. Type C1.

Selection Procedure
Specify your valve package requirements from the full line of
It is recommend to use SKM selection software. accessories as follows:
If it is not suitable, then follow the procedure below:
• Gate or stop valve
1. Select unit that delivers approximately airflow required at • Globe or balancing valve
desired speed and external static pressure from airflow rate
• 3 - way motorized valve, electric
tables. Select unit with airflow equal or more than that required.
• 2 - way motorized valve, electric
2. Apply correction factors to selected unit and find out the actual
total and sensible cooling capacity. Combinations available can be selected as standard.

3. Repeat step 1 if required parameter is not met with actual Combinations and/or requirements not covered in Figure 6,
values obtained from initially selected unit. Type1 to Type8, may be available and should refer to factory
for selection.

23
 SKM Fan Coil Units
Hi-Static FCU (EC)

Valve Packages

Type 1 Type 2 Type 5

* Type 6 *
OUT OUT
OUT OUT

IN
IN IN IN

Type 3 Type 4

OUT OUT Type 7 * Type 8 *

OUT OUT

IN IN

IN IN

Figure 6

LEGEND
LEGEND
NOTE:
Ball valve * Type 5 toNOTE:
Type 8 to be installed

* Type 5 to Type 8 to be installed

outside the unit for DDF models.

Ball valve
Globe/Balancing valve

2 Way motorized valve outside the unit .

Globe/Balancing3 valve
way motorized valve

2 Way motorized valve

3 way motorized valve

Ordering and Selection Procedure

To correctly order the desired valve package and/or control package as a complete integrated control system, the following
procedure should be adopted.

1. Select desired valve package; Type 1 to Type 8

2. Decide to have same factory installed. Add prefix C to Type (eg. Type C1) if to be supplied only by SKM for field installation

3. Select desired control package Code MP1 or MP2

4. Complete ordering code option. For example ordering code 3MP1 shall provide a factory installed valve package with a 2 way
electric modulating motorized valve plus stop valve for the supply and return lines as shown in Type 3, Figure 6.

24
 SKM Fan Coil Units
Hi-Static FCU (EC)

Dimensional Data
DYP-EC & DCYP-EC
DYP EC and DCYP EC
DYP-EC & DCYP-EC
UNIT SIZE 06 - 10 4-5/8 Ø [16]
UNIT SIZE 12 - 21
MTG.HOLES
WITH RUBBER TERMINAL
1 UNIT
2 SIZE 063 - 10 GROMMETS
4-5/8 Ø [16]
1 UNIT
2 3SIZE 12 - 21
CONNECTION
MTG.HOLES
WITH RUBBER TERMINAL
1 2 3 TERMINAL 1 2 3
GROMMETS CONNECTION 5
CONNECTION
TERMINAL

F
CONNECTION 5

F
2 2
6
[51] 2 2 [51]
[51]
FILTER
[51]DRAIN
L

DRAIN
K

FILTER REMOVAL
DRAIN
L

Ø3/4DRAIN
[19] Ø3/4 [19]
K

REMOVAL

[63]
2.5
Ø3/4 [19] Ø3/4 [19]
DxA

[63]
2.5
DxA

BOTTOM
BOTTOM RETURN-OPTIONAL
RETURN-OPTIONAL
(DUCTED)
(DUCTED)
M

M
M

4 4
4 4
1.5 A 8.5 1.5 A 8.5
1.5 A 8.5 [216] 1.5[38] A [216]8.5 1

[38]
[38]

1.5
[38] B
[216] [25] 1

[38]
[38] [216]

1.5
B
B [25]
B
*11.25 G 6

N
*11.25
[286]
G 6

DxA

F
E [286]
N

DxA
0.75 C 0.75 1 AIR VENT

F
[25]

[19] [19]
1

[25] E
0.75 C 0.75 1 AIR VENT
[25]

[19] [19] 5
1

[25] 6 FILTER
REMOVAL
P

Q
D1

5
6 REAR RETURN-OPTIONAL FILTER
FILTER
(DUCTED) REMOVAL
P

REMOVAL
Q
D1

COIL IN/OUT 5 REAR RETURN-OPTIONAL

LEFT HAND UNIT SHOWN FILTER
RIGHT HAND UNIT OPPOSITE 0.59 Ø [15]FOR SIZES 06-10 (DUCTED)
FREE RETURN-STANDARD REMOVAL
0.87 Ø [22]FOR SIZES 12-24

ALL DIMENSIONS ARE IN INCHES [mm]

COIL IN/OUT 5
UNITLEFT HAND UNIT SHOWN
A B C D D1 F G P Q K L M N LEGEND
UNIT DIMENSIONS
RIGHTinHAND 0.59 Ø [15]FOR SIZES 06-10
mmUNIT
inOPPOSITE
MODEL MODEL FOR 1 INSULATED R.A.PLENUM
mm in mm in mm in mm in mm in mm in mm in mmFREE RETURN-STANDARD in mm in mm in mm in mm
0.87 Ø [22]FOR SIZES 12-24 2 SUPPLY FAN
06 23 584 33 838 21.5 546 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 3R / 4R 22 559 27.68 703 2.64 67 1.54 39
ALL DIMENSIONS ARE IN INCHES [mm] 3 FAN MOTOR
06 4 COOLING COIL
08 A 27 686B 37 940 C 25.5 648 D12 12.48 317
305 D1 15
F 381 16.42
G 417 12P 305 9.6 244 3R / 4R + HEATER 21.78 553
K 29.41 747
L 4.61 117
M 3.50 89N
Q 08 LEGEND
UNIT UNIT DIMENSIONS 5 ACCESS PANEL
MODEL 12
MODEL FOR
in
10 mm
27 in
686 mm
37 in
940 mm
25.5 in
648 mm 368in 14.84
14.5 mm 377in17.32
mm440 in18.67mm
474 in
13.5 mm in mm
343 11.25 286 6R 23.74
in 603mm29.41in 747mm 1.54 in39 mm
2.64 in67 mm 6 1 INSULATED R.A.PLENUM
FILTER
15
2 SUPPLY FAN
12 39 991 49 1245 37.5 952 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 6R + HEATER 23.86 606 31.50 800 4.61 117 3.50 89 NOTE:
06 23 584 33 838 21.5 546 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 3R / 4R 22 559 27.68 703 2.64 67 1.54 39
3 FAN MOTOR
E = 1.73 [44] FOR 3R
15 45 1143 55 1397 43.5 1105 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 3R / 4R 26.12 663 29.93 760 0.79 20 1.54 39
06 2.604[66]COOLING
FOR 4R COIL
08 27 686 37 940 25.5 648 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 3R / 4R + HEATER 21.78 553 29.41 747 4.61 117 3.50 89
08 4.33 [110] FOR 6R
18 45 1143 55 1397 43.5 1105 14.5 368 14.84 377 17.32 440 18.67 474 13.5 343 11.25 286 10 3R / 4R + HEATER 26.82 681 31.66 804 1.82 46 2.56 65 5 ACCESS PANEL
10 27 686 37 940 25.5 648 14.5 368 14.84 377 17.32 440 18.67 474 13.5 343 11.25 286
12
18 6R 23.74 603 29.41 747 2.64 67 1.54 39 * ADD 1.75
6 [44] FOR 6 ROW
FILTER
21 51 1295 61 1549 49.5 1257 14.5 368 14.84 377 17.32 440 18.67 474 13.5 343 11.25 286 15
21 6R 27.84 707 31.66 804 0.79 20 1.54 39

12 39 991 49 1245 37.5 952 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 6R++HEATER
6R HEATER 23.8670760633.75
27.84 857800
31.50 3.63 3.50
2.884.6173 117 92 89 NOTE:
E = 1.73 [44] FOR 3R
15 45 1143 55 1397 43.5 1105 12 305 12.48 317 15 381 16.42 417 12 305 9.6 244 3R / 4R 26.12 663 29.93 760 0.79 20 1.54 39
2.60 [66] FOR 4R
4.33 [110] FOR 6R
18 45 1143 55 1397 43.5 1105 14.5 368 14.84 377 17.32 440 18.67 474 13.5 343 11.25 286 10 3R / 4R + HEATER 26.82 681 31.66 804 1.82 46 2.56 65
18 * ADD 1.75 [44] FOR 6 ROW
21 51 1295 61 1549 49.5 1257 14.5 368 14.84 377 17.32 440 18.67 474 13.5 343 11.25 286 21 6R 27.84 707 31.66 804 0.79 20 1.54 39

6R + HEATER 27.84 707 33.75 857 2.88 73 3.63 92

Table 18

25
 SKM Fan Coil Units
Hi-Static FCU (EC)
DYE-EC & DCYE-EC

Dimensional Data TERMINAL

CONNECTION
3
[76]

DYELEGEND
EC and DCYE EC

[146]
5.75
[203]
8
1 SUPPLY FAN DYE-EC & DCYE-EC 5

2 FAN MOTOR
3 COOLING COIL TERMINAL
3
CONNECTION
4 ACCESS PANEL [76]

JxG
5 FILTER LEGEND

[146]
5.75
[203]
8
B

C
6 SUPPLY AIR
1 GRILL
SUPPLY FAN 5

2 FAN MOTOR
7 RETURN AIR GRILL
3 COOLING COIL 5
FILTER
4 ACCESS PANEL
REMOVAL

[25]
JxG

1
5 FILTER 1
B

C
6 SUPPLY AIR GRILL [25]
7 RETURN AIR GRILL
[203]

5
8

FILTER REAR RETURN-OPTIONAL

REMOVAL

[25]
(DUCTED)

1
1
[25]
3 4 2 1 4x5/8 Ø [16]
[203]

MTG.HOLES
*L
8

REAR RETURN-OPTIONAL
WITH RUBBER (DUCTED)
B GROMMETS
* K*
3

L
4 2 1 4x5/8 Ø [16]
MTG.HOLES
E G E
WITH RUBBER 3 3
CABLE
0.75
[19]

B GROMMETS
A AIR VENT* K [76]E G E [76]
ENTRY
3 3
CABLE
0.75
[19]

A AIR VENT [76] [76]

ENTRY

5
5

[76]
P

[76]

3
P

3
Q
D

D
F

J
F

FILTER HOLES 1 1/4 Ø [32]

6 (FRONT VIEW) 4 7
REMOVAL
1.75

[38]

[25]
[44]

1.5

1
FILTER FOR COIL OUT, COIL IN
2.5
6 (FRONT VIEW) DRAIN 4 AND DRAIN HOLES 1 1/4 Ø [32] 7
REMOVAL
1.75

COIL IN/OUT
[38]

[64]
[44]

1.5

3/4 Ø [19] FOR COIL OUT, COIL IN

0.59 Ø [15]FOR SIZES 06-10 LEFT
2.5HAND UNIT SHOWN
DRAIN
0.87 Ø [22]FOR SIZES 12-24 ANDOPPOSITE
RIGHT HAND UNIT DRAIN
COIL IN/OUT [64]
3/4 Ø [19]
0.59 Ø [15]FOR SIZES 06-10
FREE SUPPLY & RETURN WITH GRILL -STANDARD
(REAL LEFT
VIEW) HAND UNIT SHOWN

0.87 Ø [22]FOR SIZES 12-24 RIGHT HAND UNIT OPPOSITE

ALL DIMENSIONS ARE IN INCHES [mm] * ADD 1.75 [45]FOR 6 ROW
(REAL VIEW)
UNIT A B C SUPPLY &DRETURN WITH
FREE F
E GRILL -STANDARD G J * K * L P Q
SIZE in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm
ALL DIMENSIONS ARE IN INCHES [mm] * ADD 1.75 [45]FOR 6 ROW
06 20 508 36 914 24.5 622 12 305 7.5 190 15 381 21 533 12 305 31.75 806 28.75 730 12 305 9.6 244

UNIT A
08 24
B
610 40
C
1016 28.5 724
D
12 305
E
7.5 190 15
F
381 25
G
635 12
J
305 31.75
*K
806 28.75 730
*12L 305 9.6
P
244
Q
SIZE in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm
10 24 610 40 1016 28.5 724 15 381 7.5 190 18.5 470 25 635 16 406 34 864 31 787 13.5 343 11.25 286
06 20 508
12
36
36
914
914
24.51321622
52
12 305
40.5 1029 12
7.5
305 7.5
190190 1515 381
381
21
37 940
53312 12305 31.75
305 31.75 806 28.75 730
806 28.75 730 12 305
12
9.6
305
244
9.6 244

08 24 610
15 40
42 1016 5828.51473724
1067 12
46.5 1181 305
12 7.5 7.5190190
305 1515 381
381 25 109263512
43 12305 31.75
305 31.75 80673028.75
806 28.75 12 730
305 12
9.6 305
244 9.6 244
18 42 1067 58 1473 46.5 1181 15 381 7.5 190 18.5 470 43 1092 16 406 34 864 31 787 13.5 343 11.25 286
10 24 610 40 1016 28.5 724 15 381 7.5 190 18.5 470 25 635 16 406 34 864 31 787 13.5 343 11.25 286
21 48 1219 64 1626 52.5 1333 15 381 7.5 190 18.5 470 49 1245 16 406 34 864 31 787 13.5 343 11.25 286

12 36 914 52 1321 40.5 1029 12 305 7.5 190 15 381 37 940 12 305 31.75 806 28.75 730 12 305 9.6 244

15 42 1067 58 1473 46.5 1181 12 305 7.5 190 15 381 43 1092 12 305 31.75 806 28.75 730 12 305 9.6 244

18 42 1067 58 1473 46.5 1181 15 381 7.5 190 18.5 470 43 1092 16 406 34 864 31 787 13.5 343 11.25 286

21 48 1219 64 1626 52.5 1333 15 381 7.5 190 18.5 470 49 1245 16 406 34 864 31 787 13.5 343 11.25 286

Table 19

26
SKM Fan Coil Units
Hi-Static FCU (EC)

GUIDE SPECIFICATIONS
Fan Coil Units type and size shall be as indicated on the equipment Fin spacing shall be 12 fpi for chilled water and hot water coils shall
schedule. Units shall be blow-thru arrangement. Units configurations be provided as indicated on the equipment schedule. All water
shall be horizontal (suitable for ceiling suspended) or vertical (floor coils shall be provided with manual air vent, automatic air vent
mounted), suitable for concealed or exposed applications with or shall be provided, if so specified. Coil circuiting shall be counter
without inlet plenum. Units shall be able to handle external static flow (direction of coil water flow shall be counter to direction of
pressure up to 0.4 inwg.Units shall be installed at site as per unit airflow). Coil connections shall be sweat-type. Optional MPT
Installation, Operation and Maintenance Manual. or FPT connections shall be provided, if so specified. Coil shall be
certified in accordance with AHRI - 410 and tested by compressed
Basic Unit and Cabinet air under water to the pressure of 300 psig.
Fan Coil Units shall include casing, fan(s), motor(s), coil, drain pan,
inlet plenum and air filter. Unit casing shall be in galvanized or Drain Pan
painted finish as indicated on the equipment schedule. Galvanized Drain pan shall be constructed from 1mm thick zinc coated steel
finish is standard for all models with exception of exposed units sheets, shall be painted, irrespective of the type of finish for unit
which are with painted finish as standard. casing, and insulated from outside with 4mm thick polyfoam
insulation. Drain pan shall be constructed from Stainless steel if
Galvanized casing shall be made of hot-dip galvanized steel so specified. Drain pan shall be extended to include coil, headers
sheets. Painted casing shall be made of hot-dip galvanized steel and U - bends. The bottom of drain pan shall be plain and drain
sheets, fabricated steel shall be thoroughly de-greased and then connection shall be ¾” OD sweat copper pipe. Auxiliary drip lip
phosphatized before application of an average 60 micron baked shall be supplied loose for field installation, if so specified.
electrostatic polyester dry powder coating in RAL 7032 color
scheme. This finish can pass 1000-hour, 5% salt spray test at Filter
95oF(35 oC) and 95% relative humidity (ASTM B117). Units casing
shall be made of stainless steel or aluminum if so specified. Units Air filter shall be 1” thick cleanable synthetic media and in
casing shall be thermally and acoustically insulated with 12mm accordance with ASHRAE 52.2 standards. 1” thick washable
thick closed cell poly foam insulation. Aluminum media shall be provided, if so specified. Air filter is
standard for all SKM Hi Static Fan Coil Units. Filter removal shall
Units shall be supplied with removable panels for easy access to be as shown on drawings.
internal components. For easy installation, ceiling suspended units
shall be provided with mounting holes with rubber grommets. Units Options
shall be supplied with free return and 1” supply air duct collar, 1” Following shall be provided if so specified:
return air duct collar shall be provided, if so specified. • Single deflection return air grill and double deflection supply air
grill for exposed units
Fan and Motor • Discharge plenum for free standing units (floor mounted units)
Fan shall be Forward curved, double inlet, centrifugal fan with EC • Double skin casing for locations having a high temperature
motors, conforming to the standard EN 61800-5-1. Fan casing difference between supply air temperature and surrounding
shall be galvanized sheet steel and impeller shall be sendzimir environment of the unit.
galvanized sheet steel. Fan shall be mounted on electronically
commutated (EC) motor with integrated controls. Motor shall be Valve Packages
class B, insulated with Thermal Overload Protector (TOP) and Valve Packages shall be field installed by customer or factory
wired internally. Maximum permissible ambient motor temperature installed, if so specified. As indicated on the equipment schedule,
shall be +80 deg. C and minimum of -40 deg. C. Control input valve packages shall consist of various combinations of gate or
shall be 0-10 VDC. stop valves, globe or balancing valves, 2 - way motorized valves
and 3 - way motorized valves.
Coil
Coil shall be constructed of seamless Copper tubes, 3/8” OD for Thermostats
standard units and 5/16” OD for district cooling units, arranged Thermostat shall be wall mounted decorative type, with large
in a staggered form mechanically bonded to high efficiency wavy LCD and backlight. it shall be energy efficient modulating type for
corrugated Aluminum fins. Copper fins or Pre-coated Aluminum controlling EC fan, operating on AC 24V with 0-10V DC outputs
fins shall be provided, if so specified. for valves and fan.

27
 HEAD OFFICE
P.O Box: 6004
Sharjah, United Arab Emirates
Tel: +971 6 514 3333
Fax: +971 6 514 3300
Email: [email protected]
Email: [email protected]

Spare Parts Division

Email: [email protected]

Service Centre
Email: [email protected]

REGIONAL OFFICES
United Arab Emirates
Abu Dhabi Dubai
P.O Box: 27788 P.O Box: 98822
Tel: +971 2 6445223 Tel: +971 4 2940900
Fax: +971 2 6445145 Fax: +971 4 2940029
Email: [email protected] Email: [email protected]
Al Ain
Tel: +971 3 7619921 Kuwait
Fax: +971 3 7619941 Dasman
Email: [email protected] P.O Box: 1215-PC 15463
Tel: +965 2 2492200
Saudi Arabia (Production Facility) Fax: +965 2 2494400
Email: [email protected]
SKM Air Conditioning Factory
Eastern province
AD Dammam Algeria
2nd industrial city Aissat Idir ( EX-ENMA) City
Abqiq main road Hail Street Bldg1, Flat 2, Dar El Beida Algiers
Tel: +966 3 8123332 / 4 / 5 Tel: +213 21 508197
Fax: +966 3 8123337 / +966 3 8123092 Fax: +213 21 508197
Email: [email protected] Email: [email protected]

For SKM Distributors visit:

www.skmaircon.com

120/2015