Scribd
Upload
67 views2 pages

Indication of The Visio - Lign Primers

This document provides information on primers and conditioning for different dental materials including metals, ceramics, and resins. It describes the primers MKZ Primer, MKZ Primer + MKZ EM-Activator, K-Primer, and visio.link and their indications for bonding composites to materials like CoCr alloys, titanium, zirconia, silicate ceramics, and composites. It also gives instructions for conditioning different material frameworks through sandblasting or roughening before applying the corresponding primer.

Uploaded by

andrei arhip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views2 pages

Indication of The Visio - Lign Primers

This document provides information on primers and conditioning for different dental materials including metals, ceramics, and resins. It describes the primers MKZ Primer, MKZ Primer + MKZ EM-Activator, K-Primer, and visio.link and their indications for bonding composites to materials like CoCr alloys, titanium, zirconia, silicate ceramics, and composites. It also gives instructions for conditioning different material frameworks through sandblasting or roughening before applying the corresponding primer.

Uploaded by

andrei arhip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Indication of the visio.

lign primers

MKZ Primer MKZ Primer MKZ EM-Activator K-Primer visio.link


REF MKZ 0200 4 REF MKZ 0200 4 REF MKZ EM00 4 REF APK 2500 3 REF VLP MMA1 0

Titanium CoCr Zirconium oxide/ Precious metal Silicat e/ Composite PMMA / High-perfor-
aluminium oxide eco alloy veneering ceramic teeth mance
silver-palladium e .max polymers
BioHPP

GmbH & Co.KG · 89250 Senden · Germany · Tel. (+49) 0 73 09 / 8 72-4 40 · Fax (+49) 0 73 09 / 8 72-4 44 · www.visio-lign.com · e-mail [email protected]
Indication of the primers Conditioning of the frameworks

MKZ Primer
To achieve adhesive bonding of composites to:
• CoCr (precious metal-free/non-precious metal) alloys Conditioning of metal frameworks
• Titanium alloys (CoCr/precious metal free/non-precious metal/titanium/precious metal/
• Zirconium dioxide (aluminium oxide/spinel ceramic) precious metal-reduced):
Sandblast the metal frameworks with aluminium oxide (grit size: 110 μm)
at a pressure of 3 to 4 bar. After sandlasting, the framework must not be
cleaned with the steam jet! Use alcohol and a clean brush to remove any
contaminations.
MKZ Primer + MKZ EM-Aktivator
Then the corresponding primer is applied; wait until it has evaporated.
(mix in ratio1:1)
To condition precious metal frameworks, MKZ Primer and
To achieve adhesive bonding of composites to:
MKZ EM-Aktivator must be mixed in a ratio of 1:1.
• Precious metal alloys (Au/Ag/Pt/Pd)
+ • eco alloys (reduced precious metal content alloys)

K-Primer Conditioning of oxide ceramic frameworks


To achieve adhesive bonding of composites to: (zirconium oxide/aluminium oxide/spinel ceramic):
• Silicate ceramics (CAD blanks/e-max/Mark2/ Sandlbast the ceramic frameworks with aluminium oxide (grit size: 110
lithium disilicate/glass ceramic) μm) at a pressure of max. 2 bar or roughen (dry) using a diamond abrasive
tool. After sandlasting/roughening, the framework must not be cleaned
with the steam jet! Use alcohol and a clean brush to remove any contami-
nations.
Then the corresponding primer is applied; wait until it has evaporated.

visio.link Conditioning of resins


To achieve adhesive bonding of composites to: (composites/PMMA materials/high-performance polymers,
• Composites (veneering composite/composite teeth) such as Bio XS/Bio HPP):
• PMMA materials Sandblast the resin/composite frameworks with aluminium oxide (grit
• High-performance polymers (Bio XS/Bio HPP) size: 110 μm) at a pressure of 2 to 3 bars. After sandlasting, the frame-
work must not be cleaned with the steam jet! Use alcohol and a clean
brush to remove any contaminations.
Then visio.link is applied thinly and cured for 90 sec in the polymeriza-
tion unit (wavelength range: 370 nm - 400 nm).
After curing, the conditioned surface should have a silky mat gloss to
indicate a perfect layer thickness.

GmbH & Co.KG · 89250 Senden · Germany · Tel. (+49) 0 73 09 / 8 72-4 40 · Fax (+49) 0 73 09 / 8 72-4 44 · www.visio-lign.com · e-mail [email protected] Mistake and subject to change reserved 009539GB-20131018

You might also like