Writing a coursework on a topic like "Rate of Photosynthesis" can be a challenging yet rewarding

task. It requires a deep understanding of the subject, comprehensive research, and the ability to
analyze and present information in a clear and structured manner. Here are some challenges you
might face:

1. Complexity of the Topic: Photosynthesis involves intricate biochemical processes, and

understanding the factors affecting the rate of photosynthesis can be complex. You'll need a
solid grasp of biology concepts and related disciplines.
2. Research Requirements: Conducting thorough research to gather relevant data and
scholarly articles is crucial. Access to credible sources is essential to support your arguments
and provide a strong foundation for your coursework.
3. Experimental Design: If your coursework involves experiments, designing and executing
them accurately can be challenging. Ensuring that the experimental setup is reliable and the
results are valid requires attention to detail and experimental skills.
4. Data Analysis: Analyzing the data collected from experiments or literature can be
challenging. You need to demonstrate a clear understanding of statistical methods if
applicable and interpret the results effectively.
5. Time Management: Balancing coursework with other academic and personal commitments
can be difficult. Time management is crucial to ensure you have enough time for research,
writing, and revisions.

For those finding the coursework challenging, seeking assistance from professional writing services
like ⇒ HelpWriting.net ⇔ can be a viable option. They offer experienced writers who specialize in
various subjects, including biology. However, it's important to use such services responsibly and
ethically, ensuring that the final work aligns with your understanding of the topic.

Remember, while external help can aid in meeting deadlines and presenting well-structured content,
it's crucial to engage with the coursework to deepen your understanding of the subject. Always
adhere to academic integrity and use external assistance as a supplement to your learning process.
Use as quizzes, homework, meaningful cover work, the opportunities are endless. Take results after
three minutes for each individual experiment. A lamp will be shined on to the pond weed and the
amount of bubbles released from the plant will be counted for 1 minute. Temperature was also
another factor that was controlled by the lamp being used. This means that the rate of photosynthesis
increases at an exponential rate. Chlorophyll does not absorb green light or yellow light effectively
but tends to reflect them, decreasing the amount of light absorbed and decreasing the rate of
photosynthesis. This proves that photosynthesis can be carried out in the presence of chlorophyll. To
improvw this I should be using fresh autotrophic pondweed to produce oxygen first time around. Get
started for free to track progress, measure results and access thousands of educational activities in
English, maths and science. Name Tags Badges. Print Perfectly Aligned Labels with Foxy Labels.
Get this resource as part of a bundle and save up to 32% A bundle is a package of resources grouped
together to teach a particular topic, or a series of lessons, in one place. If any one of these three
factors is reduced, the rate of photosynthesis is reduced. See other similar resources ?3.50 (no rating)
0 reviews BUY NOW Save for later Not quite what you were looking for. This means that even
when there is surplus of every other variable, the rate of photosynthesis will be limited by the
limiting factor until there is an optimal amount of the limiting factor to increase the rate of
photosynthesis further. Our customer service team will review your report and will be in touch. ?0.00
5.00 1 review Download Save for later ?0.00 5.00 1 review Download Save for later Last updated 13
December 2018 Share this Share through email Share through twitter Share through linkedin Share
through facebook Share through pinterest Cognito Education 4.82 154 reviews Not the right
resource. The equipment needed to carry out the experiment is as follows: Stopwatch, light source
(desk lamp), pondweed and paper clip to hold it down, boiling tube, test tube rack, water, and also a
meter ruler. Even if there is plenty of light a plant cannot photosynthesise if it has run out of carbon
dioxide. The inverse square law tells us that the intensity of light is inversely proportional to the
square of the distance from the source. Just like we eat food to keep us alive and healthy, plants use
the energy of the sun and water in order to stay alive and healthy. Write a review Update existing
review Submit review Cancel It's good to leave some feedback. This ensured that the conditions
were relatively the same throughout. It can only do this as fast as the light energy is arriving.
Everything is short sharp and to the point, I don’t believe in endless writing, reams of printing, spoon
feeding diagrams or pointless activities. While performing the experiment, some of the oxygen
produced from photosynthesis may have dissolved into the water. Starch is not produced throughout
the experiment which proves that photosynthesis cannot take place without carbon dioxide.
Wondrous Avery Template Word Fresh Return Address Labels. Write a review Update existing
review Submit review Cancel It's good to leave some feedback. Glucose can be built into starch,
which is a food store, or into cellulose for cell walls. It is best to use a lamp with an LED bulb, as
this gives off hardly any heat. The negative effects from this problem may be inaccurate data for
some readings.
However, as we increase the concentration of carbon dioxide even more, the rate of photosynthesis
will only increase up until a certain point, where it will flatten out because one or more of the other
factors (light intensity or temperature) is limiting the rate of photosynthesis. The equipment needed
to carry out the experiment is as follows: Stopwatch, light source (desk lamp), pondweed and paper
clip to hold it down, boiling tube, test tube rack, water, and also a meter ruler. A limiting factor is
where the rate of photosynthesis will not increase unless the limiting factor is increased. For pre-
designed options try our Avery Design Print Online Software and choose from thousands of our
designs that can help. Apply knowledge of enzymes to explain why a high temperature affects the
rate of photosynthesis Tes paid licence How can I reuse this. Water- Water is required in the
photosynthetic reaction. The second part is when we reach the optimal temperature where
photosynthesis is at its highest. See other similar resources ?3.50 (no rating) 0 reviews BUY NOW
Save for later Not quite what you were looking for. This is a found in small green pigments in the
leaf called chloroplasts. Providing more light intensity, will allow the chlorophyll to absorb light
faster, resulting in a faster rate of photosynthesis. Photosynthesis is where plants turn carbon dioxide
and water into glucose and oxygen. There are also factors affecting accuracy at low light intensities.
Therefore using the same piece throughout was the best decision. Just like we eat food to keep us
alive and healthy, plants use the energy of the sun and water in order to stay alive and healthy. From
then on, there were no more similar problems during the experiment. We build confidence and
attainment by personalising each child’s learning at a level that suits them. Therefore more oxygen
will be produced and also more glucose. After this point, any increase in light intensity will not
increase the rate of photosynthesis. AQA GCSE Biology (9-1) B8 Photosynthesis - ALL LESSONS.
Lesson practical worksheet AND online simulation to consolidate learning for homework task (2nd
power point). Our customer service team will review your report and will be in touch. ?2.00 (no
rating) 0 reviews BUY NOW Save for later ?2.00 (no rating) 0 reviews BUY NOW Save for later
Last updated 12 July 2018 Share this Share through email Share through twitter Share through
linkedin Share through facebook Share through pinterest ScienceLEL's Shop 4.00 5 reviews Not the
right resource. There’s no way I could solve this problem, because living things are so unreliable. It
must be set down firmly in place with a paper clip, upside down in the test tube, as leaves have a
greater number of stomata on the underside of their leaves, so gas will be released more readily. In
addition, with the curtains open, extra light from the windows or other experiments could have
easily affected the rate of photosynthesis. The rate may increase as the temperature increases as well.
Content for higher is different to the foundation paper, so please check which content you need to
revise:). This then enabled me to produce a graph by7 calculating the average number of bubbles of
oxygen. Even if we increased the other factors (light intensity and temperature), the rate of
photosynthesis would not increase because it is the concentration of carbon dioxide that is the
limiting factor. The amount of oxygen dissolved or used by microbes is probably insignificant to my
results since the degree of accuracy at which I measured was not high enough. The graph below
shows how the rate of photosynthesis changes as we increase the concentration of carbon dioxide.
None of the activities displayed here has been supplied by the aforementioned exam boards or any
other third party suppliers. Green plants are producers, as they can make their own food from the
raw materials around them by a process called photosynthesis. This resource hasn't been reviewed yet
To ensure quality for our reviews, only customers who have purchased this resource can review it
Report this resource to let us know if it violates our terms and conditions. Therefore more oxygen
will be produced and also more glucose. This is due to the fact that this temperature is neither too hot
nor too cold it is the ideal temperature for photosynthesis to take place. Search anything about
Master of Documents in this website. They are not constituents of glucose but are still vital. Name
Tags Badges. Print Perfectly Aligned Labels with Foxy Labels. Choose a value for carbon dioxide
mixture and keep at the same value all the way through the experiment. Everything is short sharp and
to the point, I don’t believe in endless writing, reams of printing, spoon feeding diagrams or pointless
activities. Fill the beaker with 450 cm3 of water and 50 cm3 of NaHCO3. 3. Select 1 or 2 pieces of
pond weed each roughly 5-10 cm long and cut off the stems. 4. Place the pond weed in the beaker
and weigh it down using lead taping. 5. Put in the measured amount of Sodium Hydrogen Carbonate
6. The rate at which oxygen bubbles were being produced by my plant was so high that I found it
difficult to count the amount of bubbles. This resource hasn't been reviewed yet To ensure quality
for our reviews, only customers who have purchased this resource can review it Report this resource
to let us know if it violates our terms and conditions. Chlorophyll is like an enzyme, it works best
when it is warm but not to hot. We can justify this when we look at the background we know that
the more light there is the more the weed will photosynthesis. Get this resource as part of a bundle
and save up to 32% A bundle is a package of resources grouped together to teach a particular topic,
or a series of lessons, in one place. Providing more light intensity, will allow the chlorophyll to absorb
light faster, resulting in a faster rate of photosynthesis. This stage needs light, so is called light
reaction. This is because the pondweed will not have so much energy (from the light) to activate
photosynthesis. Some oxygen is also used during the respiration of the plant. This resource hasn't
been reviewed yet To ensure quality for our reviews, only customers who have purchased this
resource can review it Report this resource to let us know if it violates our terms and conditions.
Some oxygen may have even been used by micro-organisms living on the pond weed. A variegated
leaf is used for testing because part of the leaf contains chlorophyll (or other photosynthetic
pigments) while the rest does not. This resource hasn't been reviewed yet To ensure quality for our
reviews, only customers who have purchased this resource can review it Report this resource to let us
know if it violates our terms and conditions. I will set up the desk lamp 15 cm away from the
pondweed and every time I will move it 5cm further away measuring the distance with a meter ruler.
To format avery compatible labels go to the mailings tab and choose. After this point, any increase in
the concentration of carbon dioxide will not increase the rate of photosynthesis. I always counted the
bubbles given off from the pondweed for the same amount of time (1 minute), and also every time I
did a repeat I turned off the lamp so that the pondweed had stopped photosynthesising before
starting the repeat. However, there seemed to be fewer anomalies than was expected when the
experiment was being performed. Furthermore as the energy was absorbed by the chlorophyll in the
pondweed, the energy combined with the water molecules and carbon dioxide, and as a result the
oxygen was produced (as bubbles) along with the other product of photosynthesis, glucose.
It must be set down firmly in place with a paper clip, upside down in the test tube, as leaves have a
greater number of stomata on the underside of their leaves, so gas will be released more readily. The
word and chemical equation for photosynthesis are shown below. The rate at which oxygen bubbles
were being produced by my plant was so high that I found it difficult to count the amount of
bubbles. Even if there is plenty of light a plant cannot photosynthesise if it has run out of carbon
dioxide. Differentiated and interactive, with exam questions used throughout. ?13.00 Reviews
Select overall rating (no rating) Your rating is required to reflect your happiness. This will likely
result in the plant have stunted or reduced growth; it may even result in the plant dying. Obviously,
if less carbon dioxide is available then the rate of reaction will be slower. Therefore the pondweed
would produce more food through photosynthesis. To overcome this problem I could have weighed
the different pieces of pondweed and made sure they were the same weight, but this wouldn’t have
been totally accurate. Water- Water is required in the photosynthetic reaction. After a period of five
minutes we stopped counting the bubbles, the results are available in the results section of the
coursework. A template that is constructed using MS Publisher was designed and set up to ensure
that each time it can be. The negative effects from this problem may be inaccurate data for some
readings. I believe this will happen because when the light source is nearer to the pondweed, more of
the pondweeds surface area is coming into contact with the light from the lamp, and more
photosynthesis will take place meaning more oxygen and glucose will be produced”. During this
reaction, oxygen is produced as a by-product and it is the oxygen bubbles that are being measured in
the experiment. It is best to use a lamp with an LED bulb, as this gives off hardly any heat. This
would be perfect as a revision pack for year 11’s preparing for their upcoming GCSE exams. Several
factors may interact, and it may be any one of them that is limiting photosynthesis. We offer free
downloadable templates and free design software. This is because plants absorb the Sun's energy and
transfer it into glucose (food) during photosynthesis. This is a found in small green pigments in the
leaf called chloroplasts. However, my prediction that light intensity is inversely proportional to the
distance squared did not fit into my results perfectly. If you look closely, you will see oxygen
bubbles being produced from the cut end of the stem and this will tell you how quickly
photosynthesis is happening. The light colour can be fixed by using the same lamp throughout the
experiment. I predict that as the light source (desk lamp) is moved closer to the pondweed, the rate
that oxygen is produced will increase. There must only be one variable and that is the distance of the
light source from the plant. The further away the light, the slower the oxygen bubbles will be
produced so the less light the less photosynthesis will occur which is needed for the plant to make
food. This resource hasn't been reviewed yet To ensure quality for our reviews, only customers who
have purchased this resource can review it Report this resource to let us know if it violates our terms
and conditions. Furthermore, lots of people were crowded in the same room carrying out the
experiment.
This variable can be fixed by adding a fixed amount of sodium hydrogen carbonate to the beaker and
plant. However the higher the light intensity, the higher the rate of photosynthesis. All these
resources have been designed this year to meet the demands of the new AQA Trilogy course. An
Experiment to Investigate Factors Affecting the Rate of Photosynthesis. Oh and photosynthesis also
produces oxygen gas, which we need for us to be able to live. I always counted the bubbles given off
from the pondweed for the same amount of time (1 minute), and also every time I did a repeat I
turned off the lamp so that the pondweed had stopped photosynthesising before starting the repeat.
Almost all readings were in correlation with each other and all of the anomalies were in the high
photosynthetic rate end of the results. This online label creator is the easiest way to add images and
text to Avery products. Reviews Select overall rating (no rating) Your rating is required to reflect
your happiness. An Investigation into how light intensity affects the rate of photosynthesi. The plant
gets the energy needed for photosynthesis from light. The first 10cm it drops from 8 to 6mm, that’s
2mm decrease, the pattern is the line going more downer by the mm when the cm is rising. Increasing
the temperature from, for example, 15 degrees to 30 degrees could increase the rate of
photosynthesis, possibly doubling it. The graph below shows how the rate of photosynthesis changes
as we increase the concentration of carbon dioxide. Write a review Update existing review Submit
review Cancel It's good to leave some feedback. Also combined with other nutrients to make amino
acid (building blocks of proteins) also built into lipids, which can also be a food store-e.g Sunflower
oil. I had originally chosen to count the number of bubbles in one minute but this produced
miscounts in the readings. This process is possibly the most important biochemical path known. To do
this, I used a piece of foil which had a triangular shape in the middle of it and masked it on a plant
where their was an exposed region and a shaded region. Obviously, if less carbon dioxide is available
then the rate of reaction will be slower. Returns nil when a tailor made template isnt becoming
utilized. See other similar resources ?1.00 (no rating) 0 reviews BUY NOW Save for later Not quite
what you were looking for. The larger the pondweed the larger the surface area for photosynthesis to
occur in. The level will eventually will be reached where an increase in light intensity will have no
further effect on the rate of photosynthesis, as there will be another limiting factor, in this case
probably temperature. However in plant b, carbon dioxide is present in the plastic bag. There’s no
way I could solve this problem, because living things are so unreliable. It can only do it as fast as the
light energy is arriving. I could investigate the other two factors that affect the rate of photosynthesis.
In the absence of carbon dioxide the iodine test is negative. A transparent glass block will also be
placed in front of the lamp to retain some of the heat from the lamp.
To improvw this I should be using fresh autotrophic pondweed to produce oxygen first time around.
The larger the pondweed the larger the surface area for photosynthesis to occur in. Pondweed will
photosynthesise in water - it is put in fish tanks to make sure there is enough oxygen for the fish.
There are also factors affecting accuracy at low light intensities. Reviews Select overall rating (no
rating) Your rating is required to reflect your happiness. Get started for free to track progress,
measure results and access thousands of educational activities in English, maths and science. With
low light intensity, the pond weed receives some light energy from background light such as
sunlight seeping through curtains or the light from the lamp of another student's experiment. Finding
Avery Templates Built-In To Microsoft Word. 15695 18195 18294 18695 38667 48335 5155 5195
6430 6520 6523 6524 8195 88695 Presta 94208. I am confident about this because the results I got
where the pretty much the same as the professional scientific results. A lamp will be shined on to the
pond weed and the amount of bubbles released from the plant will be counted for 1 minute.
However when dealing with living things the results can never be that accurate, because living things
do not work at a constant rate. The rule existed but there was often quite a large margin of error. This
variable can be fixed by adding a fixed amount of sodium hydrogen carbonate to the beaker and
plant. This changes the shape of the active site for the enzymes, which means that the reactants can
no longer fit into the enzyme’s active site, thus resulting in the rate of photosynthesis decreasing. As
counting the number of bubbles is not accurate so I’m measuring the volume of gas because it is
accurate. AQA GCSE Biology (9-1) B8 Photosynthesis - ALL LESSONS. You can overcome this by
adding sodium hydrogen carbonate to the water in the beaker, as this will keep the level of carbon
dioxide constant (the same). When enough light energy has been harnessed at a reaction centre, ATP
can be synthesized from ADP. It involves matching up the correct statements with the correct graph.
If the conditions that the plant requires are improved, the rate of the reaction should increase. Also
the pondweed might not have been producing oxygen as properly due to an airlock I did not notice.
As the temperature rises, the rate of photosynthesis increases. I would love to know how it can be
improved for maximum impact for your students, so feedback is always welcome. See other similar
resources ?1.29 (no rating) 0 reviews BUY NOW Save for later Not quite what you were looking for.
The design is separated into 30 parts so you can preview how the finished mailing labels will appear
as you write. This would absorb carbon dioxide and so there should be no carbon dioxide for the
plant to use. Covers graphs showing limiting factors, simple exam questions, exit ticket plenary and
online simulation link. Ideally the experiment should also be completed in one session and under two
hours so the plant does not use up a significant percentage of the CO2. Write a review Update
existing review Submit review Cancel It's good to leave some feedback. Why the rate of
photosynthesis increases or decreased from the amount of light energy absorbed is what is being
investigated in this experiment.