Writing a coursework, especially in a subject like physics, can be a challenging and time-consuming

task. Crafting a GCSE physics coursework on a topic like resistance wire requires not only a solid
understanding of the subject matter but also the ability to conduct experiments, analyze data, and
present findings in a clear and coherent manner.

Physics coursework often involves practical experiments, data collection, and analysis, which can be
demanding for students. They need to ensure the accuracy of their experiments, interpret results, and
demonstrate a deep understanding of the underlying concepts. Additionally, meeting the formatting
and citation requirements adds another layer of complexity to the process.

For those who find themselves struggling with the intricacies of writing a physics coursework,
seeking professional assistance can be a viable option. ⇒ HelpWriting.net ⇔ is one such platform
that offers coursework writing services. Their experienced writers can help streamline the process,
providing well-researched and structured coursework that meets academic standards.

It's essential to note that while seeking help can be beneficial, it's crucial to use such services
responsibly and ethically. Students should actively engage in the learning process, understanding the
content provided by these services, and using it as a guide to enhance their knowledge and writing
skills.

In conclusion, if you find yourself overwhelmed with the demands of writing a GCSE physics
coursework on resistance wire, considering external assistance from reputable platforms like ⇒
HelpWriting.net ⇔ may be a pragmatic solution. However, always prioritize your understanding of
the subject and use such services as a supplementary tool for academic improvement.
This improves accuracy because resistance is affected by the temperature of the wire. This could be
another investigation in itself, which I may follow up in the future to see whether my prediction is
correct. I have put both of the results from above onto my final graph. To prevent this I will use a
low voltage and I will try not to touch the wire. Bundle GCSE Physics: P3 Electricity Full Scheme
All resources for P3 Electricity GCSE OCR Physics Gateway 9-1. There is a very clear, steady
pattern visible both in the results table and in the graph. Where there are more particles electrons are
obviously more likely to have collisions, leading to a higher resistance. Metals conduct electricity due
to a large amount of “free” electrons in their atoms. These free electrons can carry electricity easily.
The first thing that I would change would be the connection terminal which connected the wire to
the circuit. This improves accuracy because resistance is affected by the temperature of the resistors.
We are going to do this by setting up the apparatus as seen before and carrying out one test for each
reading. As an alternative experiment on the material used the relate without. Record Amps and
length of wire. 4. Repeat the experiment with the following lengths of wire, connected between the
two crocodile clips: - 25 cm. Fore leaving the Sun, they had nothing to do with terrestrial field lines,
so one expects that. 0000000000000000000. This means that there were fewer collisions between the
electrons and the wire particles. C 20GSYLL 13 CARIBBEAN EXAMINATIONS COUNCIL
Caribbean Secondary Educat ion Cert if icat e CSEC a). Coursework, coz for their gcse chemistry
work throughout get the effect. See other similar resources ?3.00 (no rating) 0 reviews BUY NOW
Save for later Not quite what you were looking for. I also think that the resistance will be directly
proportional to the length of the wire, by this I mean that if the length of the wire doubles the
resistance will double with it. I predict that as the length increases, the resistance increases too. When
there is an electric field there the electrons will move from the negative to the positive. I would go
about this by letting the wire cool before I proceed with the next length each time, this is very
important due to ohms law. I could have solved this problem by doing the following method. I knew,
from the start of this experiment, that my results would lie on a positive correlated trend as I
portrayed in my prediction. Get this resource as part of a bundle and save up to 45% A bundle is a
package of resources grouped together to teach a particular topic, or a series of lessons, in one place.
Lections See who wants to meet up with you, who you want to. Write a review Update existing
review Submit review Cancel It's good to leave some feedback. Bundle Physics Required Practicals -
AQA GCSE Physics Paper 1 This resource contains 5 revision mats for the required practicals in the
Physics section of the new AQA Science Trilogy paper 1. This shows us that we have carried out the
experiments correctly and because we have compared them with the accurate results from the
equation shown in previous work. As the aim of the experiment was to see how the resistance was
effected by the length of wire I needed to find the resistance.
Our customer service team will review your report and will be in touch. ?1.99 (no rating) 0 reviews
BUY NOW Save for later ?1.99 (no rating) 0 reviews BUY NOW Save for later Last updated 5
December 2023 Share this Share through email Share through twitter Share through linkedin Share
through facebook Share through pinterest Simple Science 4.51 329 reviews Not the right resource.
The two anomalies could have been because the temperature became too high, creating an extra
variable to make the test unfair or the humidity could have changed. Finally, the electrons return to
the positive terminal of the cell with less energy. Whole investigations were introduced to investigate
move from the full. Having said this I have decided to investigate the significance of the length of
wire because I think that not only is it one of the more simpler variables, giving simple and accurate
results but also it the factor which I think will have the most significant effect on the resistance of
the wire. The wire with the lowest resistance was the 25cm one. The readings are accurate and have
been found using the formulae. This is based on the fact that the higher the density the more atoms
there are to be impeded by and so the more the electrons would be slowed down by. Textiles,
resistant materials some coursework help and pdf download. I think our results are accurate because
we have taken 3 readings for each length and taken the average ignoring and anomalies if we had
any. Lections See who wants to meet up with you, who you want to. If this is changed the
temperature of the wire might change in a way that is not constant making the results more
confusing. Copper wire wire, gcse science coursework word frame and finish wire. Note the readings
are taken from the best fit line however in order to prove this I have only used 5 readings at intervals
of ten cms. I said that the longer the wire the higher the resistance and this means my prediction was
correct. Investigating the through all c material if you include graphs. And so it is self explanatory
that if you have two wires, one with a higher density than the other that one will obviously have the
higher resistance because there are more atoms to bump into or be hindered by. Further investigation
and continuation of the results would be advisable to find out whether this is indeed the case. This
means that it is impossible to connect it at the exact length that you want. There were three obvious
anomalies but these are almost inevitable in any experiment. Hese results are sorted by most relevant
first (ranked search). The circuit itself can resist the flow of particles if the wires are either very thin
or very long. Submitted for senior citizens, gcse level gt; physics resistance current through. The two
lines are very similar and I think that I have chosen a good variable to give a good range of accurate
results without being too difficult. The circuit itself can resist the flow of particles if the wires are
either very thin or very long. Careful Measurement of Emf and or Internal Resistance of a Cell. I
have put both of the results from above onto my final graph. This way we were able to cope with
any anomalous results using a line of best fit. Meet People Browse through people from different
locations and decide whether you'd like to meet them. There is not a large enough range of materials
to investigate how materials affect the resistance of a wire.
Typical, pointless, gcse gcse coursework resistance of a wire Report Writing Skills Ppt structure,
make. I then cut and took the readings of progressively shorter lengths of wire, this was done by
cutting off five centimetres of the wire after every reading. Write a review Update existing review
Submit review Cancel It's good to leave some feedback. Bundle Physics Required Practicals - AQA
GCSE Physics Paper 1 This resource contains 5 revision mats for the required practicals in the
Physics section of the new AQA Science Trilogy paper 1. The gradient of line of best fit will show
the relationship between the length of the wire and its resistance. My results have only two
anomalies, which are slightly out, and show clearly that as the length of a wire increases, so does the
resistance. If ohms law is taken into consideration (.providing the temperature remains constant) then
it is likely that this caused the anomalies. We could solve the length problem by using a brand new
piece of wire, which starts off at 150cm in length, and we would cut it down to size for each result.
Fear Shakespeare puts Shakespeare's language side by side with a facing page translation into
modern English—the kind of English people. It appears there is a possibility that eventually the
results may gradually turn into a curve rather than a straight line (see further on in my Evaluation). In
the space between the atoms were the electrons that separated from the atoms. These were free to
move. Their interesting features temperature resistance, impact resistance. We could also use different
kinds of resistors in the circuit, for example thermistors, so we could see how resistance varied with
heat and that resistor or we could even use a light dependant resistor, to see how resistance would
vary with that. Hello, I am trying to figure out what happens to electrical power consumption for a
centrifugal pump when one throttles a downstream valve. In this experiment the metal wire
Nichrome will be the conductor. Lections See who wants to meet up with you, who you want to. The
wire with the lowest resistance was the 25cm one. C 20GSYLL 13 CARIBBEAN
EXAMINATIONS COUNCIL Caribbean Secondary Educat ion Cert if icat e CSEC a). There is not
a large enough range of materials to investigate how materials affect the resistance of a wire. This
resource hasn't been reviewed yet To ensure quality for our reviews, only customers who have
purchased this resource can review it Report this resource to let us know if it violates our terms and
conditions. Log In Sign Up. Home; Parents; Leaving Cert; Junior Cert; Driver Theory Test; Points
The Ocean at the End of the Lane Revision. The readings are accurate and have been found using the
formulae. Another way of getting round this problem would be to lower the voltage being put in
thus lowering the current, this would still give the same result ie the same resistance reading due to
ohm’s law. I will keep my hair tied back and ensure all equipment is working correctly before
proceeding with my experiment. I have put both of the results from above onto my final graph. This
increases the number of collisions and energy transferred twice, so twice the amount of energy is
required. Having said this if I were to use the temperature of the wire as my variable I think that as
the temperature of the wire increased so would the resistance ie the greater the temp the greater the
resistance. Investigations relating to choose factors affecting the guide by mrsoanesresistance. Also if
the atoms in the material are closely packed then the electrons will have more recurrent collisions and
the resistance will increase.
Frames, plastic sheeting, adhesive tape and aim. 293400 bytes coastal defences temperature
resistance. The electrons move through the circuit from the negative terminal where they have high
electrical potential energy towards the positive terminal. In order to take the readings I will need an
ammeter, the wire and a voltmeter the ammeter and wire will be connected in series whilst the
voltmeter will be connected in parallel. Solar wind ions move from the Sun, attached to solar field
lines. Get this resource as part of a bundle and save up to 45% A bundle is a package of resources
grouped together to teach a particular topic, or a series of lessons, in one place. The cross sectional
area is a factor that effects the resistance. Log In Sign Up. Home; Parents; Leaving Cert; Junior Cert;
Driver Theory Test; Points The Ocean at the End of the Lane Revision. Because of the immense heat
of the wire (we were able melt through a plastic pen with it) it became very unstable and the readings
varied drastically. If this is changed the temperature of the wire might change in a way that is not
constant making the results more confusing. Rminology, concepts and principles of basic financial
and managerial accounting from a user perspective. At by slicvic. create effective coursework
filename. 2011 sci-journal investigating the ?1 every time your gcse design students. Also in order to
keep the results as accurate as possible I had to take the readings very quickly and switch of the
mains in between each reading as the heat of the wire was likely to effect the resistance. This way we
were able to cope with any anomalous results using a line of best fit. I would go about this by letting
the wire cool before I proceed with the next length each time, this is very important due to ohms law.
Meet People Browse through people from different locations and decide whether you'd like to meet
them. GCSE Physics Coursework - Investigation of the resistance of a wire. Free semiconductor
papers, essays, and research papers. Record Amps and length of wire. 4. Repeat the experiment with
the following lengths of wire, connected between the two crocodile clips: - 25 cm. Because of
thorough research, I found all the information that explained the relationship between the resistance
and the length; this is why my results agreed with my hypothesis. This consisted of turning the mains
on and adjusting the voltage to 4volts (which I was able to check by looking at the reading on the
voltmeter) and taking the readings from the ammeter. We just used a crocodile clip to connect the
wire at a certain length and the clip itself is a few mm in length. Learn how to study effectively with
our free downloadable. This way we were able to cope with any anomalous results using a line of
best fit. Fore leaving the Sun, they had nothing to do with terrestrial field lines, so one expects that.
If ohms law is taken into consideration (.providing the temperature remains constant) then it is likely
that this caused the anomalies. I have to check if there are any breakages in the insulation of the
circuit wire, I must keep the current low, handle with dry hands to prevent electrical shocks. This
improves accuracy because resistance is affected by the temperature of the resistors. As the aim of the
experiment was to see how the resistance was effected by the length of wire I needed to find the
resistance. Therefore this applies to a wire of any density or thickness; double the length and the
resistance will double as well. In solid metal conductors, current is a flow of negatively charged
electrons; in an electrolyte it is a flow of positive and negative ions.
As an alternative experiment on the material used the relate without. This is because from in-depth
research from encyclopaedias and the internet I have found out that the electric current is the flow of
charged particles around a circuit of conducting material. We do this to make sure our chosen lengths
of wire are suitable, to check whether the voltage is high, low enough and to see if we have a range
of results to get us an accurate results table. I will keep my hair tied back and ensure all equipment is
working correctly before proceeding with my experiment. A graph can be plotted easily, there is a
large range of results, and the results can be recorded easily. If the temperature did get too high it
would have decreased the current, increasing the resistance. Introduction: Welcome to our physics
learning page. In order to take the readings I will need an ammeter, the wire and a voltmeter the
ammeter and wire will be connected in series whilst the voltmeter will be connected in parallel. Meet
People Browse through people from different locations and decide whether you'd like to meet them.
And so it is self explanatory that if you have two wires, one with a higher density than the other that
one will obviously have the higher resistance because there are more atoms to bump into or be
hindered by. We might not actually have been observing the results for the exact length we intended.
This course introduces the principles of animation through a variety of animation techniques. This is
because as the length of the wire increased, the electrons increased as well, therefore there were
more collisions which meant higher resistance. Free electrons are created, which carry a negative
charge, to jump along the lines of atoms. Resistance is when these electrons which flow towards the
positive collide with other atoms, they transfer some of their kinetic energy. We are going to do this
by setting up the apparatus as seen before and carrying out one test for each reading. I said that the
longer the wire the higher the resistance and this means my prediction was correct. A graph can be
plotted easily, there is a large range of results, and the results can be recorded easily. Fore leaving the
Sun, they had nothing to do with terrestrial field lines, so one expects that. The electrons move
through the circuit from the negative terminal where they have high electrical potential energy
towards the positive terminal. I used three sets of the same wire so that I could take three readings
from which I could then take the average, making the experiment much more accurate as any
inaccuracies or mistakes can be spotted and corrected if necessary. This could be another
investigation in itself, which I may follow up in the future to see whether my prediction is correct.
Frames, plastic sheeting, adhesive tape and ability of doing this index. Metals such as Nichrome
conduct electricity well because the atoms in them do not hold on to their electrons very well. The
two anomalies could have been because the temperature became too high, creating an extra variable
to make the test unfair or the humidity could have changed. For example investigations relating to
wire has been a through. In order to obtain good results I needed to keep all the other factors that
could have an effected the restistance constant ie due to the converter I had plugged into the mains I
was able to keep the voltage at 4 volts at all times and as for the thickness I have to rely on the
company which made the wire to have made it with the same thickness all the way through.
Nevertheless, my results on the graph lied on a straight line with two slight anomalies: (35,1.34) and
(40, 1.7). As the lengths of wire got shorter and shorter the wire started to heat up due to the current
with increasing magnitude and so it was extremely easy to melt the wire and oneself. The friendliest,
high quality science and math community on the planet. This improves accuracy because resistance is
affected by the temperature of the wire.