1.Overview 2.

Packaging
1.1 Main Functions 1*Device 5.SIM card
●GPS+LBS+WIFI tracking
1*3M foam tape ② Make sure the battery switch
● Intelligent power saving ● SIM card should have access to GPRS and SMS.
is in OFF position,and insert
1*Magnet cover
·Standby up to 3 years (one position per day) the SIM card correctly.Turn
1*User manual
●IPX5 water prool
the switch to ON position and
● Temper alert
the device will power on.
·Strong magnet (optional! 3.Appearance
●Light &Compact design

1.2 Specifications
Standard Micro
図
Frequency GSM 900/1800MHz
Location Accuracy <10 meters ● Insert the SIM card.
2800mAh/3.0V
Battery lithium manganese battery
Standby Up to 3 years (one position per day) Front cover 4.GSM Indicator
Working voltage/current 3VDC/50mA Status Meaning
LED Red:working status Flicker quickl GSM initialization
Operating Temperature 20℃—+70℃ Flicker slowly Connected to platform
Water proof grade IPX5 0 Remove the front cover. able he king
A.To light sensor,ple blo ta
Dimension 82.0x42.0x20.0mm e t c pe.
B .For evice with magnet cover ease remove the magnet
Weight 72g;94g(with magnetic cover) cover first before detach the light sensor blocking tape.

7.3 Troubleshooting
6.2 Working mode setting
Please set the working mode by sending the
6.3 Low battery alert
When battery is low,the device will activate low battery alarm. If you are having trouble with your device,try these Asset GPS Tracker
troubleshooting procedures before contacting a service
④ A.Use the 3M foam tape to fix
the device.
following commands.
7.Platform &APP
professional. User Guide
B.For device with magnet Problems Causes Solutions (Version 1.0)
(1)MODE,1,T1,T2# 7.1 Login service platform
cover, you can place it on GSM is always on. The signal waves are
Please login the designated service platform to set
metal unable to transmit when
T1 is the upload interval (10~1800 seconds) and operate the device.
objects. use the GPS tracker in Using the GPS tracker
T2 is the working time (5~43200 minutes)
Poor signal the places that have in the places that
Note:For power saving,when T1 is greater than or equal 7.2 Download APP poor signal have good signal
6.Operation to 360 seconds,GSM goes to sleep after the data uploaded Please download and install the APP in designated
website, APP store or Google Play store.
reception,such as tall condition
building around or
6.1 SOS number setting by device.
basement
Set SOS number via APP,GPS tracking platform or Unable Battery switch is in
SMS (SMS only valid in tracking mode) (2)MODE,2,T1,T2# to boot OFF position Switch to ON

1.SMS command to add SOS number: T1 is the start time of the interval.Format:HH:MM.Default:
SIM card inserted
SOS,A,number1,number2,number3# power-on time is used as the start time. incorrectly Check SIM card

E.g.SOS,A,1351234xxxx,1371234xxxx,1301234xxxx# T2 is the specified time interval,and value are Dirty things exist above
1,2,3,4,6,8, the SIM card Clean SIM card
2.SMS command to delete SOS number: Unable to
SOS,D,number sequence1,number sequence2,number 12,24,48,72,96,120,144,168,192,216,240,264,288,312, connect to Invalid SIM card
iOS Android Contact network One side of the device is marked "THIS SIDE TOWARDS
sequence3# 336,360.Unit:hour,default 24 hours. the network supplier iSsKY"sue,ps,lace the unit upside down will result in connection
E.g.SOS,D,1,2,3# Note:In default,GPS is off and only the WIFl anchor point Not in GSM service area Moue to service area Avoid placing the device somewhere that metal will be covering it up.
3.Query current SOS number:
is uploaded. Poor signal Move to area with
SOS# strong signal