Scribd
Upload
85 views

Concrete Cube Testing Explained

Concrete cube testing involves taking samples of freshly mixed concrete, letting them cure, and then crushing the cubes to measure their compressive strength. This ensures the concrete meets strength requirements and identifies any quality issues. Cubes are typically 150mm and cured for 7 and 28 days before testing destroys them in a calibrated compression machine. Regular cube testing is the best way for contractors and suppliers to guarantee high-quality, strong concrete.

Uploaded by

neelesh.iocl2021
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

Concrete Cube Testing Explained

Concrete cube testing involves taking samples of freshly mixed concrete, letting them cure, and then crushing the cubes to measure their compressive strength. This ensures the concrete meets strength requirements and identifies any quality issues. Cubes are typically 150mm and cured for 7 and 28 days before testing destroys them in a calibrated compression machine. Regular cube testing is the best way for contractors and suppliers to guarantee high-quality, strong concrete.

Uploaded by

neelesh.iocl2021
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Concrete Cube

Testing Explained

www.speedcrete.co.uk
[email protected]
Why untested concrete risks the integrity of your work
As a building contractor, it’s your job to ensure the integrity of any building work you oversee.
That’s why you care about the quality of the concrete you use. If you’re wondering how you
can make sure you’re getting a high-quality product, read on to find out about cube testing.
Carrying out regular cube tests is one of the main ways suppliers can guarantee their concrete
is strong and safe to use.

Why does concrete need to be tested?


The purpose of a concrete cube test is to ensure that the concrete meets its expected compressive strength.
If the concrete doesn’t reach its design strength – or if it hasn’t been correctly tested – the supplier can’t
guarantee its quality, and if the supplier can’t guarantee quality, then there’s a big risk that the concrete might not
be up for the job. It could crack, crumble or collapse in just a few months.

You can only be 100% confident about the quality of your concrete if you use a supplier
that cube-tests.

What is a concrete cube test?


A concrete cube test involves taking a sample of freshly mixed concrete, letting it cure, then crushing it and
measuring its compressive strength. Many concrete suppliers carry out this process at a certified test house,
away from their facilities in a temperature-controlled state-of-the-art testing laboratory.

A laboratory will features water tanks, a concrete cube crusher and measuring scales.
What happens during a concrete cube test?

A typical concrete cube test follows these main steps:

Take a sample of freshly mixed concrete.

Pour the concrete into 3 cube moulds – The sample concrete is poured into 2 or 3 cube moulds (depending on
the customer’s requirements). The concrete in each mould is then filled, levelled, compacted and tampered to
BSI requirements. Each cube is taken to a temperature-controlled lab, where it is kept for 24 hours, before being
cracked and put into our water tanks to cure.

Let the concrete cubes cure – The cubes are kept in our temperature-controlled water tanks for 1–4 weeks.

The cubes are removed from the curing tank, dried and grit removed. The cubes are tested using a calibrated
compression machine. This can be carried out internally by competent personnel or by a certified test house.

The cubes are tested on the face perpendicular to the casting face. The compression machine exerts a constant
progressing force on the cubes till they fail, the rate of loading is 0.6 ± 0.2 M/Pas (N/mm²/s). The reading at
failure is the maximum compressive strength of the concrete. BS EN 12390-2: 2009 / BS EN 12390-3:2009.

Crush the cubes to test their strength – When each cube


is ready for testing, it is put into a concrete crusher. This
machine exerts force onto the cube until it breaks. The
rate at which it crushes is measured, and this is its
compressive strength.

What size should the When should the


concrete cubes be? cubes be tested?
Concrete cubes are typically made in moulds with The concrete should be tested after 7 days and after
dimensions of 150mm x 100mm x 150mm. The 28 days. That’s why 2 or 3 cubes are taken – so that
moulds have to meet the British Standard for testing the concrete can be measured after different lengths
hardened concrete (BS EN 12390-1:2000). of time.

Steel or plastic concrete test moulds are used to to Usually 1 cube will be tested at 7 days and 2 cubes
contain the concrete and create the cubes. These at 28 days, however this may vary depending of
can be purchased from Speedcretes online shop. the requirements, check the design first.
Specifications
Concrete cube testing as with all methods of testing, fresh / hard concrete are governed by standards set by the
British Standards Institute and or the client in-house specifications. These standards specify all aspects involved in
the process of carrying out tests, from the equipment to the method of testing.

A list of the National Concrete Standards relevant to Cube Testing are:

Fresh Concrete:

BS EN 12350-1:2009 – Sampling
BS EN 12350-2:2009 – Testing Fresh Concrete, Slump Test
BS EN 206-1:2000 – Concrete. Specification, performance, production and conformity

Hard Concrete:

BS EN 12390-1:2000 – Shape, dimensions and other requirements for specimens and moulds
BS EN 12390-2:2009 – Making and Curing Specimens for Strength Test
BS EN 12390-3:2009 – Compression Strength of Test Specimens
BS EN 12390-4:2009 – Compression Strength – Specification of Test Machines

Conclusion

We can’t stress enough the value of carrying out cubes tests on concrete within the Construction
Industry. Not only does it verify compliance with design soon after construction but also can save
time and costly investigations later if things go wrong.

www.speedcrete.co.uk
[email protected]
Salisbury: 01722 416 196 Glasgow: 0141 849 0077 Stafford: 01785 332 891 Norfolk: 01553 829530

You might also like