Scribd
Upload
81 views

Casing Properties

This document provides specifications for various oilfield casing including size, weight, thickness, grade, minimum/optimum/maximum make up torque values, collapse pressure, burst pressure, and tensile strength. It includes specifications for 7", 9-5/8", 10-3/4", 13-3/8", 18-5/8", 20", 26", and 30" casing with details on determining proper make up torque when a triangle is stenciled on the thread.

Uploaded by

amin peyvand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

Casing Properties

This document provides specifications for various oilfield casing including size, weight, thickness, grade, minimum/optimum/maximum make up torque values, collapse pressure, burst pressure, and tensile strength. It includes specifications for 7", 9-5/8", 10-3/4", 13-3/8", 18-5/8", 20", 26", and 30" casing with details on determining proper make up torque when a triangle is stenciled on the thread.

Uploaded by

amin peyvand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Make Up Torque (ft.

lb) Collapse Burst Pressure Tensile Strength


Size (in) Weight (lb/ft) THK. (in) Grade Ttread
Min. Optimum Max. Pressure (Psi) (Psi) (Psi)
23 0.317 CRA VAM TOP 8460 9400 10340 4784 8717 115000
26 0.362 CRA VAM TOP HC 13700 15200 16700 7206 9955 115000
7"
29 0.408 CRA VAM TOP HC 16000 17700 19400 10483 11220 115000
35 0.498 L-80 Type1 Hydril CS 15800 16985 18170 9960 19590 95000
9-5/8" 47 0.472 L-80 Type1 PJE 10800 11600 13000 4750 6875 95000
9-5/8" 47 0.472 L-80 Type1 VAM TOP 14400 15900 17400 4750 6875 95000
10-3/4" 55.5 0.495 L-80 Type1 VAM TOP 20850 23150 25450 4300 7655 95000
13-3/8" 68 0.48 L-80 Type1 Buttress 7900 8800 9900 2260 5020 95000
18-5/8" 97 0.486 J / K-55 Buttress 7540 ? 7950 780 2420 75000 / 95000
20" 133 0.635 J / K-55 Buttress 12525 ? 14540 1603 3056 75000 / 95000
20" 133 0.635 X-56 Buttress 12525 ? 14540 1603 3112 66000
20" 133 0.635 X-56 Big Omega * 1500 3060 66000
20" 133 0.635 X-56 RL-4S N/A N/A N/A 1410 2840 66000
26" 169.4 0.625 X-52 OSH 1 20000 22000 24000 680 2187.5 66000
30" 310 1 X-52 RL-4S N/A N/A N/A 1630 3030 66000
*
- A triangle is stenciled on each thread. A long white line on the pipe end site, marks the location.
- To find the proper torque at least 10 power make ups to the base of this triangle should be carried out. The average torque value of these make ups is the proper torque
to run the total casing string.
- Power make up procedure should not be interrupted until the proper torque value is reached.
- Every connection should be checked for correct power make up position. The coupling status after power make up must be within the tolerance area of
0.433" (11mm) to 0.748" (19mm) reffered to the apex of triangle.
- Make up torque values with API mod thread compound for all grades is about 16000 ft.lbs

You might also like