RAYMING PCB & ASSEMBLY

How is Thick 0.093 Inches? An In-Depth Look

Something that is considered ordinary or usual is referred to as a

standard because it acts as a yardstick by which other things of a similar

nature may be compared. As an example, Apple has always been

regarded by many as the pinnacle of the mobile market for quite some

time.

Size is another definition of a standard. For instance, refrigerators typically

range in width from 24 to 40 in. The standard serves as a crucial

consideration when examining an object’s dimensions since it specifies

what features and functionalities the product must have.

PCB thickness serves as a crucial guideline to take into account if you want

to concentrate on PCBs. There doesn’t exist an official and definitive

standard, though, which needs to remember always. However, as they

refer to the most popular choice and are often available, some typical

sizes are regarded as the norm.

Your manufacturer will often suggest that you adhere to those approved

standards of PCB thickness so that your design may be adjusted to the

equipment’s capabilities you’re utilizing and to save turnaround time and

cost for the PCBs.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

In this article, we talk about common standards of thicknesses PCB and

show you exactly how to specify them. We also go through the factors that

need to take into account when deciding between the standard and

non-standard specifications, as it is a crucial design decision.

Request PCB Manufacturing & Assembly Quote Now

Table of Contents

Standard PCB Thickness

The typical PCB thickness, according to manufacturers, is 1.57 mm, or

around 0.062 inches. That is both somewhat right and partially incorrect.

The reference size has been 0.062 inches since that is the bakelite layers

size that was produced in the beginning days of Circuit board production.

Actually, it’s merely a matter of historical precedent.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

These days, PCB can be built smaller or bigger than the PCB standard for

thickness. But for the majority of designs, that standard is still the most

often chosen alternative. The existing standard really exists on a spectrum,

to be precise. Three popular standard thicknesses of PCB are available:

0.78mm (0.03 in), 1.57mm (0.062 in), and 2.36mm (0.093 in).

A multitude of manufacturing and design considerations must take into

account to choose the proper PCB thickness. The following design

elements must consider while choosing:

 PCB material

 PCB layers count

 Copper Thickness

 Operating/Working environment

 Signals type

 Vias type

Here are a few manufacturing considerations that need to take into

account while choosing the proper PCB thickness:

 Copper Thickness

 Layer count

 Equipment for drill holes

 Depanelization method

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Standard Two-Layer PCB Thickness

Over time, multi-layered board designs have evolved and have become a

common kind of board utilized in PCB manufacturing. They frequently

comprise copper-covered glass cloth with an epoxy foundation.

Technology advancements have made it possible for the multiple layers to

support greater weights while maintaining a 63mm thickness.

Complex circuit wiring demands led to an increase in circuit board layer

counts. As a result, the PCBs that were produced as well contain more

layers, which causes the Circuit thickness to rise from 63mm up to 93mm.

Internal layer cores with thicknesses of 93, 59, 47, 39, 35, 28, 21, 18, 14, 9.5,

8, and 5 mils are available using Isola’s 370HR materials. For materials

with high-temperature, there are various options of thickness, such as 39,

22, 14, 10, and 8 mils, available for cores of Isola’s 370HR.

The number of foil lamination layers affects the conventional PCB

thickness as well. The typical thickness for foil lamination on a four-layer

circuit board would be about 0.031.” The most suitable standard thickness

for a six-layered foil lamination is about 0.062.”

Finally, the typical Circuit thickness includes 0.125, 0.093, and 0.062 inches

for an eight-layered or a tenfold-layer board. Depending on the needs of

your PCB, you may also select an internal copper foil layer that is 12, 1, or

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

2 ounces thick. Moreover, You can utilize your own stack-up or one of the

dielectric builds we’ve supplied.

Request PCB Manufacturing & Assembly Quote Now

Can I Get A Custom Thickness of 0.093 Inches?

PCBs consist of sheets or panels in standard sizes. This indicates that they

are produced in conventional sizes, which explains why the fabrication

companies probably already have them on hand or can rapidly obtain

them.

Other sizes could be possible, but they may constrain by the contract

manufacturer’s equipment processing capacities, and obtaining

customized PCB thickness will add to the delay.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Therefore, sure, you may have a customized PCB thickness. However, this

will rely on your manufacturer, and you must account for a delay. This is

because it takes longer to obtain these customized panels or sheets.

If your layout calls for an unusual PCB thickness, you must take it into

account. If you are looking for a customized PCB thickness, there are some

other elements to take into account; we will go over them in more detail in

the next section.

Factors To Consider When Ordering Custom Thickness of 0.093

Inches

1. Equipment Capabilities

The most crucial element to take into account is this. Ensure that your

manufacturing facility has the tools necessary to produce PCBs with the

desired thickness. This and other crucial design decisions must create

early in the design phase to avoid having to revise and rethink your

whole PCB layout.

2. Longer Turnaround Time

The turnaround period will become longer if a rare Circuit thickness is

needed since it takes longer to prepare the panels. Due to its potential to

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

disrupt your timetable and have an influence on the prototype stage, this

ought to be taken into account immediately.

3. Greater Cost

Choosing a customized PCB thickness can result in more costs due to the

potential need for specialized materials, more work and labor hours, and

manufacture, as is frequently the situation with bespoke products. To

determine whether you can handle the added expenditures or not, you

must examine this from the start.

A bespoke PCB thickness makes more sense in certain situations, while

the conventional Circuit thickness is an excellent choice in others.

Therefore, the decision is ultimately up to you. You may reduce your

expenses and have quicker turnaround times by using standard Circuit

thickness. If you want to go with a customized PCB thickness, you must

find a fabrication facility with the appropriate tools.

Request PCB Manufacturing & Assembly Quote Now

Conclusion

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

You’ll be glad to learn that RayPCB has an extensive network of PCB

manufacturing facilities all around the globe that can accommodate any

project needs. Every shop offers a lot of experience, many quality

certifications, and cutting-edge tools. We’ll be able to adhere to your

instructions and construct your boards accurately the very first time.

All of the PCB assembly processes are in-house. We prioritize DFM to

minimize turnaround duration and ensure that you don’t need to spend

time making back-and-forth design revisions. All of the components are

acquired from reliable vendors. Additionally, we offer complete assistance

throughout the whole procedure. Beginning with design, enabling us to

produce a seamless transition from the stage of prototyping to

production.

We know for offering efficient, excellent PCB fabrication that will satisfy all

of your demands. In contrast to other businesses, we devote our whole

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

time to comprehending your design and objectives so that we can assist

you in deciding between the standard and customized PCB thickness.

Related Posts:

1. How Thick is the 5oz PCB?

2. An In-Depth Look at Energy Smart Meters

3. The Main Features and Properties of the Isola IS415 PCB Material

4. What are the Recommended Process Conditions of the Arlon 37N

PCB Material?

https://www.raypcb.com/how-thick-is-0-093-inches/

PCB Manufacturing & Assembly Services https://www.raypcb.com/