0% found this document useful (0 votes)
45 views4 pages

ADI4

This document describes the hardware interfaces of a drive controller unit. It provides details on the pin assignments and functions of the digital input interface X6-2, the analog setpoint interface X3, and the encoder interfaces X4-1/X4-2/X5-1/X5-2. Preassembled cables for the unit with a length of 35m are also noted.

Uploaded by

arash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
45 views4 pages

ADI4

This document describes the hardware interfaces of a drive controller unit. It provides details on the pin assignments and functions of the digital input interface X6-2, the analog setpoint interface X3, and the encoder interfaces X4-1/X4-2/X5-1/X5-2. Preassembled cables for the unit with a length of 35m are also noted.

Uploaded by

arash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Hardware Description

2.2.8 Interface (X6–2): Digital inputs

Connection
Two 12-pin connectors FK–MCP 1.5/15–ST–3.81 by Phoenix (X6–1 and X6–2).

Pin assignment
Table 2-12 Pin assignment: digital input interface (X6–2)

Pin Name Type1) Function


1 P24OUT VI 24 V DC supply voltage
2 BERO1 DI Input signal of BERO/external zero mark 1
3 BERO2 DI Input signal of BERO/external zero mark 2
4 BERO3 DI Input signal of BERO/external zero mark 3
5 BERO4 DI Input signal of BERO/external zero mark 4
6 MEPU1 DI Measuring signal of Measuring Input 1 (see Measuring Inputs,
Page 2-25)
7 MEPU2 DI Measuring signal of Measuring Input 2 (see Measuring Inputs,
Page 2-25)
8 DRV1_RDY DI “Drive Ready” signal of Axis 1
9 DRV2_RDY DI “Drive Ready” signal of Axis 2
10 DRV3_RDY DI “Drive Ready” signal of Axis 3
11 DRV4_RDY DI “Drive Ready” signal of Axis 4
12 MOUT VI Reference of the supply voltage
1) VI Voltage input
Pin 1
DI Digital input (24 V)

X6–2
ADI4 P24OUT Pin no.:
(+24 VDC) 1
1

Optocoupler
2

: :
: :
: :
: :
11

0V +24 V
12 P24OUText
ext. power supply
+24 V stabilized
M

E Siemens AG, 2005. All rights reserved


ADI4 - Analog Drive Interface for 4 Axis, 05.2005 Edition 2-23
Hardware Description

2.2.5 Interface (X3): Analog setpoint interface

Connection
50–pin SUB D connector

Pin assignment

Table 2-5 Pin assignment: Analog setpoint interface (X3)

Pin Name Type1) Function


1 SW1 VO Setpoint of Axis 1 ($10 V; max 10 mA)
2 BS2 VO Reference for setpoint of Axis 2
3 SW3 VO Setpoint of Axis 3 ($10 V; max 10 mA)
4 BS4 VO Reference for setpoint of Axis 4
5–13 – – –
14 RF1_1 K 2) “Drive enable” of Axis 1, Relay Contact 1
15 RF2_1 K 2) “Drive enable” of Axis 2, Relay Contact 1
16 RF3_1 K 2) “Drive enable” of Axis 3, Relay Contact 1
17 RF4_1 K 2) “Drive enable” of Axis 4, Relay Contact 1
18–33 – – –
34 BS1 VO Reference for setpoint of Axis 1
35 SW2 VO Setpoint of Axis 2 ($10 V; max 10 mA)
36 BS3 VO Reference for setpoint of Axis 3
37 SW4 VO Setpoint of Axis 4 ($10 V; max 10 mA)
38–46 – – –
47 RF1_2 K 2) “Drive enable” of Axis 1, Relay Contact 2
48 RF2_2 K 2) “Drive enable” of Axis 2, Relay Contact 2
49 RF3_2 K 2) “Drive enable” of Axis 3, Relay Contact 2
50 RF4_2 K 2) “Drive enable” of Axis 4, Relay Contact 2
1) VO Voltage output
K Relay contact
2) Max. current carrying capacity: 2 A at 150 VDC or 125 VAC
Max. number of operating cycles:
– 24 VDC, 1 A: 107
– 24 VDC, 2 A: 105

ADI4
X3
Pin number:
Relay
Signal: 14 ... 17
“Drive enable”
of Axis 1 to 4 47 ... 50

E Siemens AG, 2005. All rights reserved


ADI4 - Analog Drive Interface for 4 Axis, 05.2005 Edition 2-15
Hardware Description

Preassembled cables
Order No. (MLFB): 6FX2 002-3AD01-
Cable length: 35 m
Information regarding the length codes is provided in:
References: /Z/ Catalog NC Z.

2.2.6 Interfaces(X4–1/X4–2/X5–1/X5–2): encoder interfaces

Connection
15-pin SUB D socket

Pin assignment

Table 2-6 Pin assignment: Encoder interface of Axis 1 to 4 (X4–1/X4–2/X5–1/X5–2) for


incremental encoder (TTL) and absolute encoder (SSI)

Pin Designation1) Type 2) Function


Incremental Absolute (SSI)
1 Do not use – –
2 – CLSx O SSI shift clock
3 – CLSx_N O SSI shift clock inverted
4 P5MS VO 5 V DC supply voltage
5 P24SSI VO 24 V DC supply voltage
6 P5MS VO 5 V DC supply voltage
7 MEXT VO Reference for supply voltage
8 Do not use – –
9 MEXT VO Reference for supply voltage
10 Rx_S – I Zero mark signal (Ua0)
11 XRx_S – I Zero mark signal inverted (Ua0)
12 XBx_S – I Encoder signal Track B inverted (Ua2)
13 Bx_S – I Encoder signal Track B (Ua2)
14 XAx_S – I Encoder signal Track A inverted (Ua1)
– DATAx_N I SSI data inverse
15 Ax_S – I Encoder signal Track A (Ua1)
– DATAx I SSI data
1) x Number of encoder interface with X4–1=1, X4–2=2, X5–1=3, X5–2=4
2) VO Voltage output
I Signal input
O Signal output

 Siemens AG, 2005. All rights reserved


2-16 ADI4 - Analog Drive Interface for 4 Axis, 05.2005 Edition
Hardware Description

2.2.7 Interface (X6–1): Digital outputs

Connection
Two 12-pin connectors FK-MCP 1.5/15–ST–3.81 by Phoenix (X6–1 and X6–2).

Pin assignment
Table 2-10 Pin assignment: digital output interface (X6–1)

Pin Name Type1) Function


1 P24EXT2 VI ext. 24 V DC supply voltage
2 Q0 DO Digital output signal 1
3 Q1 DO Digital output signal 2
4 Q2 DO Digital output signal 3
5 Q3 DO Digital output signal 4
6 DIR1 DO Digital output signal 5 or directional signal of Axis 1 3)
7 DIR2 DO Digital output signal 6 or directional signal of Axis 2 3)
8 DIR3 DO Digital output signal 7 or directional signal of Axis 3 3)
9 DIR4 DO Digital output signal 8 or directional signal of Axis 4 3)
10 RDY1 K 2) “Ready” signal of Relay Contact 1
11 RDY2 K 2) “Ready” signal of Relay Contact 2
12 MEXT2 VI Reference of the external supply voltage
1) VI Voltage input
Pin 1
DO Digital output (24 V)
K Relay contact
2) Max. current carrying capacity: 2 A
for 150 VDC or 125 VAC;
Max. number of operating cycles:
– 24 VDC, 1 A: 107
– 24 VDC, 2 A: 105
3) For “unipolar spindle” function j
(or unipolar motor)

ext. power supply


ADI4 X6–1 +24 V stabilized
Pin no.: 0V
+24 V
1 (P24EXT2)

Optocoupler
2
Relay

Driver

Driver 3
: :
: :
: :
: :
Driver 9

Relay
10
Signal:
“Ready”
11
12 (MEXT2)

E Siemens AG, 2005. All rights reserved


2-20 ADI4 - Analog Drive Interface for 4 Axis, 05.2005 Edition

You might also like