C o n v e r t B i b Te X t o H T M L o r © 2022 by Andreas Fischer

PDF

References
[1] M. Andriollo, E. Fanton, and A. Tortella. A Review of Innovative Electromagnetic Technologies for a Totally Artificial
Heart. APPLIED SCIENCES, 13, 2023.

[2] A Comprehensive Review of Conventional and Intelligence-Based Approaches for the Fault Diagnosis and Condition
Monitoring of Induction Motors. 2022.

[3] S. Lovato, M. Bova, M. Massaro, M. Andriollo, and R. Lot. Active Steering Assistant for Powered Two-Wheelers:
hardware prototyping & results . Proceedings of the 4th IFToMM Italy Conference (IFIT 2022), 2022.

[4] S. Lovato, M. Bova, M. Massaro, M. Andriollo, and R. Lot. An Active Steering Assistant System for Powered Two-
Wheelers. Proceedings of the World Conference on Engineering, 2022.

[5] Mauro Andriollo, Andrea Iselle, and Andrea Tortella. Analytical Procedure for the Performance Prediction of Single-
sided Axial Flux PM Machines with Coreless and Slotless Stator. 2022 International Conference on Electrical Machines
(ICEM), IEEE, pp. 1218–1224, 2022.

[6] M. Andriollo, E. Lax, A. Tortella, and L. Martinelli. Control strategy for the maximum power extraction of a wave
attenuator . Proceedings of 2022 Second International Conference on Sustainable Mobility Applications, Renewables and
Technology (SMART), pp. 1–10, 2022.

[7] Mauro Andriollo, Andrea Tortella, and Marco Soldera. Convertitore elettromagnetico roto-traslante per la propulsione
‘contact-less’ di veicoli leggeri a corta percorrenza. TP: TRASPORTI PUBBLICI, pp. 31–42, 2022.

[8] Mauro Andriollo, Enrico Fanton, Michele Forzan, and Andrea Tortella. Design and Analysis of a Dual Mover Linear
Oscillating Actuator for a Totally Artificial Heart. 2022 International Conference on Electrical Machines (ICEM), IEEE, pp.
408–414, 2022.

[9] M. Andriollo, S. Bernasconi, and A. Tortella. Design issues of a rotating to linear motion magnetic converter for short-
distance transport applications. ENERGIES, 14, 2021.

[10] Mauro Andriollo, Simone Bernasconi, and Andrea Tortella. Force and Torque Assessment in a Rotating to Linear
Motion Magnetic Converter with Gearing Capability. ECCE Conference Proceedings, IEEE, pp. 4389–4396, 2021.

[11] R. R. Kumar, G. Cirrincione, M. Cirrincione, A. Tortella, and M. Andriollo. A Topological Neural Based Scheme for
Classification of Faults in Induction Machines. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 57, pp. 272–283, 2020.

[12] M. Andriollo, L. Bellini, R. Benato, and A. Tortella. Combined Electromechanical-thermal model of a high-speed
flywheel energy storage system. Proceedings of 2020 International Conference on Electrical Machines (ICEM), pp. 2392–
2398, 2020.

[13] M. Andriollo, R. Benato, and A. Tortella. Design and modeling of an integrated flywheel magnetic suspension for
kinetic energy storage systems. ENERGIES, 13, pp. 1–22, 2020.

[14] Mauro Andriollo, Rahul Ranjeev Kumar, Andrea Tortella, and Riccardo Zavagnin. FEM based Assessment of Winding
Inter-Tum Fault Indicators in Line Connected Induction Motors. AEIT 2020 Conference Proceedings, IEEE, pp. 1–6, 2020.

[15] Rahul R. Kumar, Giansalvo Cirrincione, Maurizio Cirrincione, Andrea Tortella, and Mauro Andriollo. Induction Machine
Fault Detection and Classification Using Non-Parametric, Statistical-Frequency Features and Shallow Neural Networks.
IEEE TRANSACTIONS ON ENERGY CONVERSION, pp. 1–10, 2020.

[16] R. R Kumar, V. Randazzo, G. Cirrincione, M. Cirrincione, E. Pasero, A. Tortella, and M. Andriollo. Induction Machine
Stator Fault Tracking using the Growing Curvilinear Component Analysis. IEEE ACCESS, pp. 1–12, 2020.

[17] Rahul Ranjeev Kumar, Andrea Tortella, and Mauro Andriollo. Spectral and Discriminant Analysis Based Classification
of Faults in Induction Machines. 2020 AEIT International Annual Conference (AEIT), pp. 1–6, 2020.
[18] Mauro Andriollo and Andrea Tortella. Urban Drive Simulation of a Li-Ion battery/SC Supplied EV by an Integrated
Model. Proceedings of 2020AEIT International Conference of Electrical and Electronic Technologies for Automotive (AEIT
AUTOMOTIVE), AEIT - Ass. Italiana di Elettrotecnica Elettronica Automaz. Informatica e Telecomunicaz., pp. 1–6, 2020.

[19] M. Andriollo, G. Martinelli, A. Morini, and A. Tortella. I Trasformatori. Teoria ed Esercizi - II edizione . Esculapio, ISBN:
8893851547, 2019.

[20] Sebastian Dambone Sessa, M. Andriollo, and A. Tortella. Simulation Results from a Kinetic-Electrochemical Energy
Storage Model for Network Frequency Regulation. 2019 AEIT International Annual Conference, AEIT 2019, Institute of
Electrical and Electronics Engineers Inc., pp. 1–6, 2019.

[21] Rahul Ranjeev Kumar, G Cirrincione, M. Cirrincione, A Tortella, and M Andriollo. A Topological and Neural Based
Technique for Classification of Faults in Induction Machines. IEEE Xplore Digital Library, IEEE, pp. 653–658, 2018.

[22] R. R. Kumar, Giansalvo Cirrincione, M. Cirrincione, M. Andriollo, and A. Tortella. Accurate Fault Diagnosis and
Classification Scheme Based on Non-Parametric, Statistical-Frequency Features and Neural Networks . Conference
Proceedings, IEEE, pp. 1747–1753, 2018.

[23] Luca Martinelli, Piero Ruol, Chiara Favaretto, Matteo Volpato, Mauro Andriollo, and Andrea Tortella. EXPERIMENTAL
INVESTIGATION ON THE DYNAMICS OF A FLOATING WEC WITH PTO PHASE CONTROL. SDEWES, 2018.

[24] R. R. Kumar, G. Cirrincione, M. Cirrincione, A. Tortella, and M. Andriollo. Induction Machine Fault Diagnosis Using
Stator Current Subspace Spectral Estimation . ICEMS 2018 - 2018 21st International Conference on Electrical Machines
and Systems, Institute of Electrical and Electronics Engineers Inc., pp. 2565–2570, 2018.

[25] Sebastian Dambone Sessa, Andrea Tortella, Mauro Andriollo, and Roberto Benato. Li-ion battery-flywheel hybrid
storage system: Countering battery aging during a grid frequency regulation service . APPLIED SCIENCES, 8, pp. 1–15,
2018.

[26] Mauro Andriollo and Andrea Tortella. Performance Optimization of a High-Speed Axial Flux Generator with SMC
cores. SPEEDAM 2018 - Proceedings: International Symposium on Power Electronics, Electrical Drives, Automation and
Motion, Institute of Electrical and Electronics Engineers Inc., pp. 1147–1152, 2018.

[27] Mauro Andriollo and Andrea Tortella. Preliminary Design of an Axial Flux Machine with Careless Stator for Flywheel
Applications. Conference Proceedings, IEEE, pp. 941–947, 2018.

[28] Mauro Andriollo, Fabio Graziottin, and Andrea Tortella. Design of an Axial-type Magnetic Gear for the Contact-less
Recharging of a Heavy-Duty Bus Flywheel Storage System. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, pp. 1–9,
2017.

[29] Mauro Andriollo, Andrea Tortella, and Stefano Trubian. Design optimization of a small single-phase motor with
auxiliary permanent magnet . 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Institute of Electrical
and Electronics Engineers Inc., pp. 5033–5040, 2017.

[30] M. Andriollo, R. Benato, S. Dambone Sessa, F. Nucci, F. Siviero, F. Palone, and M. Rebolini. Power conversion system
model and control for energy stationary storage. 2017 AEIT International Annual Conference: Infrastructures for Energy
and ICT: Opportunities for Fostering Innovation, AEIT 2017, Institute of Electrical and Electronics Engineers Inc., pp. 1–6,
2017.

[31] Mauro Andriollo, Alessandro Buratto, and Andrea Tortella. Dynamic performance enhancement of small single-phase
line-start PM motors. Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, Institute of
Electrical and Electronics Engineers Inc., pp. 755–760, 2016.

[32] Mauro Andriollo, Roberto Benato, Sebastian Dambone Sessa, Nicola Di Pietro, Naoki Hirai, Yuichi Nakanishi, and
Enrico Senatore. Energy intensive electrochemical storage in Italy: 34.8 MW sodium-sulphur secondary cells . JOURNAL OF
ENERGY STORAGE, 5, pp. 146–155, 2016.

[33] Mauro Andriollo, Marco Caramanna, and Andrea Tortella. Equivalent Circuit Models for the Analysis of a Commercial
Ultracapacitor Module. AEIT 2016 Conference Proceedings, 2016.
[34] M. Andriollo, R. Benato, S. Dambone Sessa, N. Di Pietro, and R. Polito. Large scale Italian energy intensive storage
installation: Safety issues and environmental compatibility. CIGRE Session 46, CIGRE, pp. 1–13, 2016.

[35] Mauro Andriollo, Fabrizio Saracino, and Andrea Tortella. Rotating to linear motion magnetic converter for low
capacity transport applications. Conference Proceedings, IEEE, pp. 897–903, 2016.

[36] Mauro Andriollo, Fabio Graziottin, and Andrea Tortella. Contact-less electromagnetic recharging system for heavy-
duty bus flywheel storage . 2015 International Conference on Renewable Energy Research and Applications, ICRERA 2015,
Institute of Electrical and Electronics Engineers Inc., pp. 232–237, 2015.

[37] Mauro Andriollo, Enrico Scaldaferro, and Andrea Tortella. Design optimization of the magnetic suspension for a
flywheel energy storage application. Proc. of International Conference on Clean Electrical Power (ICCEP), 2015, pp. 216–
221, 2015.

[38] Mauro Andriollo, Franco Bortot, and Andrea Tortella. Disc-type PM machine for the electromagnetic
conversion/suspension of a flywheel system. 2015 International Conference on Renewable Energy Research and
Applications, ICRERA 2015, Institute of Electrical and Electronics Engineers Inc., pp. 739–744, 2015.

[39] Mauro Andriollo, Giovanni Attilio Martinelli, and Andrea Tortella. Optimization of an Electrodynamic Linear Actuator
for Biometric Applications. IEEE TRANSACTIONS ON MAGNETICS, pp. 1–7, 2015.

[40] Mauro Andriollo, Roberto Benato, Bressan Michele, Sebastian Dambone Sessa, Palone Francesco, and Polito Rosario
Maria. Review of Power Conversion and Conditioning Systems for Stationary Electrochemical Storage . ENERGIES, 8, pp.
960–975, 2015.

[41] Mauro Andriollo and Andrea Tortella. Sustainability evaluation of an electric bus fleet for the urban public transport
system of Padova, Italy. Urban Transport XXI, C.A. Brebbia, pp. 533–545, 2015.

[42] Mauro Andriollo, Roberto Benato, and Sebastian Dambone Sessa. 34,8 MW di accumulo elettrochimico di tipo
ENERGY INTENSIVE mediante celle secondarie sodio-zolfo (Na-S). L'ENERGIA ELETTRICA, 91, pp. 23–35, 2014.

[43] Mauro Andriollo and Andrea Tortella. Dynamic model of a free piston tubular linear generator for vehicle auxiliary
power supply2014 IEEE International Electric Vehicle Conference (IEVC). 2014 IEEE International Electric Vehicle
Conference (IEVC), pp. 1–7, 2014.

[44] Mauro Andriollo, Roberto Benato, and Sebastian Dambone Sessa. Il contributo offerto dalle celle di tipo Na-Beta per
massive installazioni di accumulo elettrochimico sulla rete elettrica di trasmissione. Presentazioni per la giornata di
studio, pp. 0–30, 2014.

[45] Mauro Andriollo, Andrea Tortella, and Kallio Samuli. Optimized "fork connection" arrangement for multiple star
windings. 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, pp. 100–105,
2014.

[46] Mauro Andriollo and Andrea Tortella. TECNICHE AVANZATE PER L'ANALISI DI MACCHINE ELETTRICHE A MAGNETE
PERMANENTE CON ANSYS MAXWELL . Innovabook 2014. Paper anthology. Fluidodinamica, meccanica, elettromagnetismo,
COBALTO, pp. 165–200, 2014.

[47] Mauro Andriollo, Giulio Bettanini Fecia di Cossato, and Andrea Tortella. Design procedure of a small-size axial flux
motor with Halbach-type permanent magnet rotor and SMC cores. 2013 International Electric Machines & Drives
Conference, pp. 775–780, 2013.

[48] Mauro Andriollo, Luca Dall'Ora, and Andrea Tortella. Electromagnetic parameter characterization of a short-stroke
linear PM generator for renewable energy application. 2013 International Conference on Clean Electrical Power (ICCEP),
pp. 383–390, 2013.

[49] S. Kallio, Mauro Andriollo, J. Karttunen, P. Peltoniemi, and P. Silventoinen. Model of double-star IPM machines with
general mutual inductance relationships between the two three-phase winding sets. INTERNATIONAL REVIEW OF
ELECTRICAL ENGINEERING, 8, pp. 1717–1727, 2013.

[50] M. Furlan, Mauro Andriollo, and Andrea Tortella. Motore Elettrico Brushless a Magnete Permanente di Tipo Monofase .
2013.

[51] Mauro Andriollo, Manuel De Bortoli, and Andrea Tortella. Variable speed operation of a wind turbine driven self-
excited induction generator connected to a low power DC-link. 2013 International Conference on Clean Electrical Power
(ICCEP), pp. 376–382, 2013.

[52] S. Kallio, Mauro Andriollo, Andrea Tortella, and J. Karttunen. Decoupled d-q Model of Double-Star Interior Permanent
Magnet Synchronous Machines . IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, pp. 1–9, 2012.

[53] S. Kallio, J. Karttunen, Mauro Andriollo, P. Peltoniemi, and P. Silventoinen. Finite Element Based Phase-Variable Model
in the Analysis of Double-Star Permanent Magnet Synchronous Machines. Proceedings of International Symposium on
Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2012, pp. 1462–1467, 2012.

[54] Mauro Andriollo, Luca Dall'Ora, and Andrea Tortella. Magnetization space harmonic analysis of TLPMGs allowing for
magnetic saturation. Proceedings of INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and
Motion SPEEDAM 2012, pp. 501–506, 2012.

[55] Mauro Andriollo, Luca Dall'Ora, Giovanni Attilio Martinelli, and Andrea Tortella. Performance comparison of saturated
tubular linear permanent magnet generators by simplified FEAs. Proceedings of the International Conference on
Renewable Energy Research and Applications (ICRERA), 2012, pp. 1–6, 2012.

[56] Mauro Andriollo and Andrea Tortella. Analytical formulation for the torque enhancement of PM single-phase motor by
a stator auxiliary magnet and a slotted PM rotor. Proceedings of the 15th International Symposium on Electromagnetic
Fields in Mechatronics, Electrical and Electronic Engineering (ISEF), pp. 1–8, 2011.

[57] Mauro Andriollo, Manuel De Bortoli, and Andrea Tortella. Procedures for the Additional Losses Assessment and
Analysis in High Efficiency Induction Machines. Proceedings of ICCEP 2011 - International Conference on Clean Electrical
Power - Renewable Energy Resources Impact, pp. 389–394, 2011.

[58] Mauro Andriollo, Giovanni Attilio Martinelli, and Andrea Tortella. Torque Improvement of Single Phase Brushless PM
Motors by Auxiliary Magnets. Proceeding of IEEE International Electric Machines and Drives Conference, IEEE, pp. 1546–
1551, 2011.

[59] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Design
Improvement of a Single-Phase Brushless Permanent Magnet Motor for Small Fan Appliances. IEEE TRANSACTIONS ON
INDUSTRIAL ELECTRONICS, 57, pp. 88–95, 2010.

[60] Mauro Andriollo, Manuel De Bortoli, and Andrea Tortella. Equivalent circuit for the dynamic analysis of a PM
synchronous generator/back-to-back converter drive for VAWT applications . Proceedings of the International Symposium
on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010, pp. 407–412, 2010.

[61] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. I trasformatori: Teoria ed Esercizi - Seconda edizione .
LIBRERIA INTERNAZIONALE CORTINA, ISBN: 9788877843180, 2010.

[62] Mauro Andriollo, G Bettanini, and Andrea Tortella. Single-phase axial flux claw pole motor for high efficiency
applications. Proceedings on International Conference on Electrical Machines (ICEM), 2010 XIX, pp. 1–6, 2010.

[63] Mauro Andriollo, Manuel De Bortoli, M Furlan, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella.
Analysis and design of a novel axial flux PM motor with SMC cores for pump applications . Book of Abstracts, Istituto
nazionale di Ricerca Metrologica, pp. 1–1, 2009.

[64] Mauro Andriollo, G Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Analysis of Double-Star
Permanent-Magnet Synchronous Generators by a General Decoupled d-q Model. IEEE TRANSACTIONS ON INDUSTRY
APPLICATIONS, 45, pp. 1416–1424, 2009.

[65] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Analysis of the
air-gap asymmetry in axial-flux permanent magnet generators. Proceedings of IEEE International Electric Machines and
Drives Conference, 2009. IEMDC '09, IEEE, pp. 344–351, 2009.

[66] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Control Strategy
of a Wind Turbine Drive by an Integrated Model. WIND ENERGY, 12, pp. 33–49, 2009.
[67] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. Macchine Elettriche Rotanti: Teoria ed Esercizi -
Seconda edizione . LIBRERIA INTERNAZIONALE CORTINA, ISBN: 9788877843074, 2009.

[68] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Control
strategies for a VAWT driven PM synchronous generator. Proceedings of 19th International Symposium on Power
Electronics, Electrical Drives, Automation & Motion (SPEEDAM 2008), pp. 804–809, 2008.

[69] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, S. Bassini, and A.
Scala. Performance Assessment of a Single-Phase PM Synchronous Motor for Small Fan Appliances . Proceedings of
ICEM'08- XVIII International Conference on Electrical Machines, pp. 1–6, 2008.

[70] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Permanent
Magnet Axial Flux Disc Generator for Small Wind Turbines. Proceedings of ICEM'08- XVIII International Conference on
Electrical Machines, pp. 1–6, 2008.

[71] Mauro Andriollo, G Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. PM losses evaluation by
harmonic analysis of the magnetic vector potential perturbation. Proceedings of 2008 IEEE Power and Energy Society
General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, IEEE, pp. 1–6, 2008.

[72] Mauro Andriollo, Manuel De Bortoli, Giovanni Attilio Martinelli, A Morini, and Andrea Tortella. TF Linear Motor with
Passive Guideway for Low Speed Transport. Proceedings of 20th International Conference on Magnetically Levitated
Systems and Linear Drives (MAGLEV 2008), 2008.

[73] Mauro Andriollo, G Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Analysis of Double Star
Permanent Magnet Synchronous Generators by a General Decoupled d-q Model . Proceedings of 2007 IEEE International
Electric Machines and Drives Conference (IEMDC 2007), IEEE, pp. 7–12, 2007.

[74] Mauro Andriollo, Alessandro Caporali, Giovanni Attilio Martinelli, Augusto Morini, C Morini, T Pepi, and Andrea
Tortella. Innovative fuel cell buses with automated guidance by GPS for public transport application . Urban Transport XIII -
Urban Transport and the Environment in the 21st Century, WIT Press, pp. 391–408, 2007.

[75] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Performance Assessment of a Wind
PM Generator-Rectifier System by an Integrated FEM-Circuit Model. Proceedings of 2007 IEEE International Electric
Machines & Drives Conference, IEMDC '07, IEEE, pp. 358–363, 2007.

[76] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Analysis of a PM
Generator-Rectifier System for Wind Energy Applications. Proceedings of XVII International Conference on Electrical
Machines ICEM 2006, pp. 1–6, 2006.

[77] Mauro Andriollo, CARMELI M. S, F Castelli Dezza, and M. Mauri. Control design aspects for an EDS levitation system .
Proceedings of SPEEDAM 2006, pp. 1184–1189, 2006.

[78] Mauro Andriollo, T Bertoncelli, F Castelli Dezza, and D. Rosati. Design Aspects of Coils for EDS Levitation Systems .
Proceedings of 19th International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2006), pp.
1–5, 2006.

[79] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Efficiency Comparison
of In-wheel PM Motors for Bus Propulsion. Proceedings of XVII International Conference on Electrical Machines ICEM 2006,
pp. 1–6, 2006.

[80] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, S. Stellin, and Andrea Tortella.
Electromagnetic Design of In-wheel Permanent Magnet Motors . WSEAS TRANSACTIONS ON POWER SYSTEMS, 1, pp. 303–
310, 2006.

[81] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Performance analysis
of an in-wheel vernier hybrid motor for electric propulsion. ELECTROMOTION, 13, pp. 42–48, 2006.

[82] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, G Peruzzi, and Andrea Tortella. Produzione
di energia elettrica con biomasse utilizzando microturbine a gas . 101° Convegno Nazionale AEIT, pp. 1–16, 2006.
[83] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, S. Stellin, and Andrea Tortella. Rating of the Power
Components in Series-hybrid Buses with Different Supply Control Strategies. Proceedings of International Symposium on
Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM 2006), pp. 235–242, 2006.

[84] Mauro Andriollo, G Bettanini, A Fasolo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Sistemi di
generazione eolica di piccola potenza. 101° Convegno Nazionale AEIT, pp. 1–11, 2006.

[85] Mauro Andriollo, G Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Tipologie e criteri di
dimensionamento elettromagnetico di motori-ruota per autobus. 17° Seminario Interattivo Azionamenti Elettrici -
Evoluzione tecnologica e problematiche emergenti, pp. 111–144, 2006.

[86] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Design and analysis of
a SPM in-wheel motor for the propulsion of electric buses. Proceedings of 6th International Symposium on Advanced
Electromechanical Motion Systems - ELECTROMOTION 2005, 2005.

[87] Mauro Andriollo, T. Bertoncelli, F. Castelli Dezza, and M. Tamburrino. Durability Aspects in the Power Flow
Management of A Fuel Cell Supplied Light Rail Transit System. Proceedings of International Conference on Ship Propulsion
and Railway Traction Systems Conference SPRTS 2005, pp. 386–393, 2005.

[88] Mauro Andriollo, G. Bettanini, Giovanni Attilio Martinelli, Augusto Morini, S. Stellin, and Andrea Tortella. In-wheel
Permanent Magnet Motors for Public Transport Application. Proceedings of WSEAS Power ’05 Conference, pp. 156–164,
2005.

[89] Mauro Andriollo, T. Bertoncelli, F. Castelli Dezza, and M. Tamburrino. Optimization of Power Flow Management in a
Fuel-Cell Supplied Vehicle for Public City Transportation . Proceedings of IEEE International Conference on Electric
Machines and Drives, IEMDC 2005, IEEE, pp. 1801–1808, 2005.

[90] Mauro Andriollo, Michele Forzan, A Morini, Giovanni Attilio Martinelli, Andrea Tortella, and M. Zerbetto. Performance
Analysis of a Transverse Flux Wheel Motor by a Non-linear Mathematical Model . INTERNATIONAL JOURNAL OF ELECTRICAL
ENGINEERING IN TRANSPORTATION, 1, pp. 25–32, 2005.

[91] Mauro Andriollo, U. Basile, T. Bertoncelli, and F. Castelli Dezza. A linear actuator supplied by inductive coupling in a
moving coil transformer configuration. Proceedings of Symposium on Power Electronics, Electrical Drives, Automation &
Motion SPEEDAM 2004, pp. 1–6, 2004.

[92] Mauro Andriollo, Giovanni Attilio Martinelli, A. Morini, Andrea Tortella, and M. Zerbetto. A Transverse flux wheel hub
motor for electric buses. Proceedings of Symposium on Power Electronics, Electrical Drives, Automation and Motion
SPEEDAM 2004, pp. 84–90, 2004.

[93] Mauro Andriollo and T. Bertoncelli. Analytical formulation for design and optimization of permanent magnet arrays .
Proceedings of 16th International Conference on Electrical Machines ICEM 2004, pp. 1–6, 2004.

[94] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Application of the surface-current
method to the analysis of saturated electromagnetic devices. COMPEL, 23, pp. 328–347, 2004.

[95] Mauro Andriollo, F. Castelli Dezza, and M. Tamburrino. Converter control strategies for the power flow management
in a fuel-cell supplied vehicle for the public city transportation. Proceedings of Symposium on Power Electronics, Electrical
Drives, Automation and Motion SPEEDAM 2004, pp. 1–6, 2004.

[96] Michele Forzan, Augusto Morini, Giovanni Attilio Martinelli, Andrea Tortella, M. Zerbetto, and Mauro Andriollo.
Performance Analysis of a Transverse Flux Wheel Motor by a Non-linear Mathematical Model . Proceedings of 16th
International Conference on Electrical Machines - ICEM 2004, 2004.

[97] Mauro Andriollo, T. Bertoncelli, and A. DI GERLANDO. A magnetic network approach to the transient analysis of
synchronous machines. COMPEL, 22, pp. 953–968, 2003.

[98] Mauro Andriollo and T. Bertoncelli. A novel configuration of transverse flux hybrid linear stepper motor . Proceedings
of the 4th International Symposium on LINEAR DRIVES FOR INDUSTRY APPLICATION LDIA2003, pp. 399–402, 2003.

[99] Mauro Andriollo and T. Bertoncelli. Automated Procedure for the Performance Improvement of a Low-power Single-
phase Synchronous Motor. Proceedings of IEEE International Electric Machines and Drives Conference IEMDC 2003, IEEE,
pp. 1098–1104, 2003.

[100] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, and M. Zerbetto. Design optimisation of
slotless linear PM motors. 4th Int. Symposium on Linear Drives for Industry Applications, pp. 203–206, 2003.

[101] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. I Trasformatori: Teoria ed Esercizi . Edizioni Libreria
Cortina, ISBN: 9788877842398, 2003.

[102] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, and M. Zerbetto. Performance
evaluation of a TF linear PM motor. 4th Linear Drives for Industry Applications, pp. 41–44, 2003.

[103] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, and M. Zerbetto. Performance
Improvement of Low-rate Single-phase Alternators. International Electric Machines and Drives Conference IEMDC 2003,
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, pp. 1137–1143, 2003.

[104] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, and M. Zerbetto. A non-linear d-q
model for the analysis of low power single-phase synchronous generators. 15th International Conference on Electrical
Machines, Techonologisch Instituut vzw, pp. *–*, 2002.

[105] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, Andrea Tortella, and M. Zerbetto. Electromagnetic
transient simulation of a single-phase synchronous generator by a non-linear d-q model. Symposium on Power
Electronics,Electrical Drives,Automation&Motion, pp. 25–34, 2002.

[106] Mauro Andriollo, G. DEL TORCHIO, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Innovative
technologies for the public transportation in the urban mobility plan of Padova . Urban Transport VIII - Urban Transport and
the Environment in the 21st Century, WIT Press, pp. 75–88, 2002.

[107] Mauro Andriollo, A. DI GERLANDO, and D. Porzio. A design oriented magnetic circuit model of low-power
synchronous generators. Proceedings of 4th International Symposium on Advanced Electromechanical Motion Systems -
ELECTROMOTION 2001, Casadei, D.; Jufer, M.; Munteanu, R.; Radulescu, M.M.;, pp. 535–540, 2001.

[108] Mauro Andriollo, L. Bolognese, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Electromagnetic
design improvement of a switched reluctance motor by a surface current method procedure. ELECTROMOTION, 3, pp.
125–132, 2001.

[109] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Finite-element modelization of
slotted configurations by means of magnetically anisotropic smooth cores. COMPEL, 20 n.1, pp. 140–151, 2001.

[110] Mauro Andriollo, L. Bolognese, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Optimization of
magnetic suspension devices by a surface current method. IEEE TRANSACTIONS ON MAGNETICS, 37, pp. 2877–2880,
2001.

[111] Mauro Andriollo, L Bolognese, Giovanni Attilio Martinelli, A Morini, and Andrea Tortella. Automated contour
refinement procedure for the 2D magnetic field analysis by the surface-current method. Digest Book, pp. 377–377, 2000.

[112] Mauro Andriollo and A. Di Gerlando. Guide lineari di tipo elettromagnetico: principi di funzionamento ed
applicazioni. COMPONENTI INDUSTRIALI, 46,47,48, 2000.

[113] Mauro Andriollo, Giovanni Attilio Martinelli, A Morini, and Andrea Tortella. A surface-currents method for the
electromagnetic analysis of 2-D configurations with magnetic permeability discontinuities . Digest Book, pp. 474–475,
1999.

[114] Mauro Andriollo, Giovanni Attilio Martinelli, A. Morini, Andrea Tortella, and S. Vantini. Analysis of 2-D configurations
with high permeability cores and permanent magnets by a surface-currents method. Proceedings of the 9th Int.
Symposium on Electromagnetic Fields in Electrical Engineering - ISEF 99, P. Di Barba, S. Wiak, pp. 248–252, 1999.

[115] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Criteri di progettazione
elettromagnetica e di ottimizzazione dei sistemi di trasporto ad alta velocità a levitazione magnetica. 4° Convegno
Nazionale Progetto Finalizzato CNR, pp. *–*, 1999.
[116] Mauro Andriollo, G. Martinelli, A. Morini, and Andrea Tortella. Optimisation of an EMS-Maglev system by a FEM
Analysis. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 10, pp. 1–19, 1999.

[117] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Optimization of the magnetic
configuration in EMS-MAGLEV systems . INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 10,
pp. 1–19, 1999.

[118] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Design criteria of the on-board
linear generator winding in EMS-MAGLEV systems. 15th Int. Conf. on Magnetically Levitated Systems & Linear Drives, pp.
214–219, 1998.

[119] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Electromagnetic optimization of
EMS-MAGLEV systems . IEEE TRANSACTIONS ON MAGNETICS, 34, pp. 2090–2092, 1998.

[120] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. Macchine Elettriche Rotanti: Teoria ed Esercizi .
Edizioni Libreria Cortina, ISBN: 9788877841971, 1998.

[121] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Calculation procedures for
electromagnetic design of high-speed MAGLEV systems. Proceedings of the World Congress on Railway Research,
WCRR'97, pp. 817–826, 1997.

[122] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Optimization of the on-board linear
generator in EMS-MAGLEV trains. IEEE TRANSACTIONS ON MAGNETICS, 33, pp. 4224–4226, 1997.

[123] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Procedure per l'ottimizzazione dei
sistemi di trasporto ad alta velocità di tipo EMS-MAGLEV. Atti del 3° Convegno Nazionale Progetto Finalizzato CNR
"Trasporti 2", pp. 1–18, 1997.

[124] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. Analisi elettromagnetica dei sistemi
di trasporto Maglev di tipo EMS azionati da motori sincroni lineari. Azionamenti Elettrici con Motori Lineari, pp. 75–88,
1996.

[125] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and Andrea Tortella. FEM calculation of the LSM
propulsion force in EMS-MAGLEV trains. IEEE TRANSACTIONS ON MAGNETICS, 32, pp. 5064–5066, 1996.

[126] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Optimization of the winding
configuration in EDS-MAGLEV trains. IEEE TRANSACTIONS ON MAGNETICS, 32, pp. 2393–2398, 1996.

[127] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. 3D analysis of forces in the shields of SC
coils in EDS-MAGLEV transport systems. Advanced computational and design techniques in applied electromagnetic
systems: proceedings of the International ISEM Symposium on Advanced Computational and Design Techniques in
Applied Electromagnetic Systems, Seoul, Korea, 22-24 June, 1994, Elsevier, pp. 371–374, 1995.

[128] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Criteri di progetto e di ottimizzazione
del sistema propulsivo e di levitazione in convogli MAGLEV-EDS. Atti del 2° Convegno Nazionale Progetto Finalizzato CNR
"Trasporti 2", pp. 1171–1185, 1995.

[129] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. I trasformatori - Esercizi con elementi di teoria .
Edizioni Libreria Cortina, ISBN: 8877841583, 1995.

[130] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. I trasporti a levitazione magnetica: alcuni aspetti
energetici e ambientali. Atti del Convegno "Tecnologia-ecologia: un binomio possibile", 1995.

[131] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. MINIMIZATION OF THE INDUCED
CURRENT EFFECTS IN THE SHIELDS OF SC COILS IN EDS-MAGLEV TRAINS. IEEE TRANSACTIONS ON APPLIED
SUPERCONDUCTIVITY, 5, pp. 604–609, 1995.

[132] Mauro Andriollo, Giovanni Attilio Martinelli, A. Morini, and A. Scuttari. On-board linear generator for EDS-MAGLEV
vehicles: Design optimisation of the SC and induction windings. APPLIED SUPERCONDUCTIVITY 1995, VOLS. 1 AND 2: VOL
1: PLENARY TALKS AND HIGH CURRENT APPLICATIONS; VOL 2: SMALL SCALE APPLICATIONS, Bristol:IOP Publishing
Limited: Bristol ; Boston : Adam Hilger., pp. 651–654, 1995.
[133] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Transient stability in EDS-MAGLEV
vehicles: analytical approach. Proceedings of the 14th International Conference on Magnetically Levitated Systems -
MAGLEV'95, pp. 449–454, 1995.

[134] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Transient stability in EDS-MAGLEV
vehicles: numerical simulation. Proceedings of the 14th International Conference on Magnetically Levitated Systems -
MAGLEV'95, pp. 455–459, 1995.

[135] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. 3D analysis of losses in the shields of SC
coils in EDS-MAGLEV transport systems. Computers in Railways IV, Vol 2 Railway Operations, WIT PRESS, 1994.

[136] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Mathematical model of on-board power
supply for EDS-MAGLEV transport systems. Proceedings of Symposium on Power Electronics, Electrical Drives, Automation
and Motion SPEEDAM 1994, pp. 425–434, 1994.

[137] Mauro Andriollo, F. Carli, Giovanni Attilio Martinelli, and Augusto Morini. PC codes for the field calculation in MHD
superconducting magnets. Proceedings of the 2nd International Workshop on MHD Superconducting Magnets,
StM/Nautilus, pp. 1–6, 1994.

[138] F. Albicini, Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. Control strategies of a LSM drive for
EDS-MAGLEV systems. Proceedings of 13th International Conference on Magnetically Levitated Systems and Linear Drives
MAGLEV '93, National Aeronautics and Space Administration; Springfield, Va. : National Technical Information Service,
distributor, pp. 310–315, 1993.

[139] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Electromechanical transients in EDS-
MAGLEV systems. Proceedings of International Conference on Speedup Technology for Railway and MAGLEV Vehicles,
STECH'93, Japanese Society of Mechanical Engineers - JSME, pp. 137–143, 1993.

[140] F. Albicini, M. Andriollo, G. Martinelli, and A. Morini. General expressions of propulsion force in eds-maglev transport
systems with superconducting coils . IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 3, pp. 425–429, 1993.

[141] F Albicini, Mauro Andriollo, Giovanni Attilio Martinelli, and A. Morini. General expressions of propulsion forces in
EDS-MAGLEV transport systems with superconducting coils . IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 3,
pp. 425–429, 1993.

[142] F. Albicini, Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and A. Scuttari. Some design aspects in LSM
drives for EDS-MAGLEV systems. Proceedings of International Conference on Speedup Technology for Railway and
MAGLEV Vehicles, STECH'93, Japanese Society of Mechanical Engineers - JSM£, pp. 85–90, 1993.

[143] F. Albicini, Mauro Andriollo, Giovanni Attilio Martinelli, A. Morini, and A. Scuttari. Calcolo del campo magnetico e
delle mutue induttanze in sistemi di trasporto MAGLEV di tipo EDS azionati da motori lineari sincroni. Atti del convegno:
Workshop Nazionale su "Azionamenti elettrici con motori lineari", pp. 1–29, 1992.

[144] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. General expressions for forces acting on EDS-
MAGLEV systems driven by linear synchronous motors . Proceedings of the International Aegean Conference on Electrical
Machines and Power Electronics, ACEMP'92, pp. 580–587, 1992.

[145] Mauro Andriollo, Giovanni Attilio Martinelli, M. F. Moisio, and Augusto Morini. Calculation of propulsion forces in
EDS-MAGLEV transport systems with superconducting coils . ARCHIV FUER ELEKTROTECHNIK, 72, pp. 333–339, 1989.

[146] Mauro Andriollo, Giovanni Attilio Martinelli, Augusto Morini, and M. F. Moisio. Metodo semplificato per il calcolo della
forza di propulsione in sistemi di trasporto MAGLEV di tipo EDS con bobine superconduttive. ATTI - ISTITUTO VENETO DI
SCIENZE, LETTERE ED ARTI. CLASSE DI SCIENZE FISICHE, MATEMATICHE E NATURALI, 146, pp. 89–110, 1988.

[147] Mauro Andriollo, S. Caparelli, Giovanni Attilio Martinelli, and Augusto Morini. Three-dimensional analysis of
electromagnetic forces in some geometries with cylindrical symmetry. ARCHIV FUER ELEKTROTECHNIK, 69, pp. 261–269,
1986.

[148] Mauro Andriollo, Giovanni Attilio Martinelli, and Augusto Morini. Calculation of electromagnetic forces in
superconducting magnets. Proceedings of the 9th International Conference on Magnet Technology, pp. 718–721, 1985.