QUICK START GUIDE

Step 1: Scan the QR code

Step 2: Download & install the

‘MActivePro’ app

Step 3: Login with the required details

Step 4: Go to Device tab > Add Device >

Select ‘Ignite Nexus’

Step 5: Click on Pair to Connect

 1
4

3 5

OVERVIEW
1) Rotating crown key 4) Microphone
2) Premium metal casing 5) Speaker
3) Sensors 6) Multifunction Button
 APP DOWNLOAD
Scan the QR code to download the smartwatch app
OR
Download ‘MActivePro’ App from the Playstore or
App store
FEATURES

Built in watch faces

Press and hold the home screen / Rotate the crown key

You will enter the ‘Watch face’ menu

Scroll & select your favorite screen

Note: You can customize the watch faces from the app
 NOTIFICATIONS Notifications
Message

... Suryakumar
Hi there!

... Suryakumar
Hi there!

Up Down

Right Right

Left Left

Split Screen Commonly used

Up Down

uilt in watch faces

Press and hold the home screen / Rotate the crown key
You will enter the ‘Watch face’ menu
Widgets
INSTALL STRAPS

To attach the straps, slide in the bottom of the strap into the gap on
the watch case.

Similar to a bank card swipe in the machine

 REMOVE STRAPS
To remove the straps, slide the band outwards from the main watch
casing.

Opposite of the installation process

CHARGING

Charge the smartwatch before using

Full charge in less than 90 mins

Connect the back of the watch to the wireless charger available in

the box

Please use a 5V charging adapter or connect USB with the laptop

Note: Do not use any fast/dash charging adapters

CONNECT

CB-Ignite Nexus

CB-Ignite Nexus
Available

Note:
After installation, turn on the BT on your phone.

Confirm the notifications and all other permission.

Fill in the personal details.

CONNECT
CB-Ignite Nexus

Connect

Tap “Add Device”, search for ‘CB-Ignite Nexus’ in the available list.

Tap ‘Connect’
 CONNECT
Ignite Nexus

SCAN

Scan the QR code to download the smartwatch app

OR
Download ‘MActivePro’ App from the Playstore or
App store
MAIN FEATURES

CB-Ignite Nexus

Updating

Firmware Upgrade
Once the Bluetooth is connected, in App,
Tap ‘Device’ – Firmware version (This reminds you if
there’s a new version available for update.

Once the Bluetooth is connected, in App,

Tap ‘Device’ – Firmware version (This reminds you if
there’s a new version available for update.
 MAIN FEATURES
Phone audio connection switch
Swipe up from the main screen to enter the status bar, tap the
second option of connection icon to turn it off, or tap again to turn it
on.
Factory Reset
Swipe from top to bottom once on the main screen

Open Settings > scroll & select ‘Restore factory’ option

Click on ‘9 ’ to reset or ‘8 ’ to cancel

Menstrual Health
Set your own period time, better remind to manage your health.

Standby watch faces:

There are couple of watch faces for options, long press 3 seconds at
home screen to switch between different watch faces, also allows to
download new watch faces in the app. You will be able to customize
your photos as watch face.
 FEATURES
Sleep Monitor
Sleep monitoring will be automatically active from 10:00 PM to 8:00
AM the next day. You can check the details of sleep quality with the
app in the phone.
 FEATURES
Exercise
Select a sport mode to record your workout. Enter to start the
activity, slide right to pause the workout, tap to end the workout. It
records the duration, calories, heart rate etc.
OTHER FEATURES

Notification

Notifications
Synchronizing and display of app notifications such as Facebook,
WhatsApp, SMS, Email, etc,. between the mobile phone and the
Smartwatch. Up to 8 notifications can be displayed on the watch.
Please adjust the settings in the MActive Pro app and allow
notifications to be displayed on the Smartwatch (app permissions).
Activity Info
Showing the workout and health data including Steps, Distance,
Calorie’s consumption. This data will be saved until midnight (12:00
AM) everyday and then reset to values 0 for the next day. You can
look up for the previous data in History.
FEATURES

Heart Rate Monitoring Function

When this function is activated, the heart rate is being measured by
the device scanning the surface capillary of the skin with green
optical diodes. Please allow for about 2 secs to start measuring and
recording. Slide to other Menus to stop measuring.

[Please note: This is not a medical device, any values shown are for
reference only]
Stopwatch
Press the rotating crown to access the Menu

Scroll and select the ‘Stopwatch’ option and activate

You also have Pause & reset options

OTHER FEATURES

Device name
CB-Ignite Nexus

MAC
23:10:12:70:01:00

Firmware version
NJ-K4B-1.0.2

About
Check model number, Bluetooth addresses, Version number.

Alarm Function:

You can set several alarm times via the MActive Pro app on the
phone.
OTHER FEATURES

Find Phone
As the smartwatch and phone are connected, the Find Phone
Function can support locating your mobile phone. Tap ‘Find Phone’
and locate your phone via the ringtone/sound coming from your
phone.
OTHER FEATURES

Sedentary, drink water reminder

Via the app set a time for exercise and / or a reminder to drink water.
OTHER FEATURES

Remote Control (Music)

Allows to activate and control music playback on the phone via the
Smartwatch.
 FEATURES
OTHER FEATURES

Wrist Wake up
You can ‘Wake Up’ the watch with wrist movement. Please set this
function in the app.
Built in watch faces
Note: This might increase power consumption.

Press and hold the home screen / Rotate the crown key
You will enter the ‘Watch face’ menu