Scribd
Upload
45 views

RENGAT Mud Program - AMC

This document summarizes the mud program for two sections of a well: the top hole/PQ section from 0-60 metres, and the production/HQ section from 60-440 metres. For each section, it provides the hole diameter, depth, mud type, target mud properties, and mud additives and concentrations. It also lists mud volumes and costs. The top hole section uses a polymer/KCl mud with additives including Aus-Dex, Xan-Bore, potassium chloride, caustic soda and biocide. The production section recycles mud where possible and uses a similar mud with additional additives of Residrill for filtration control and contingency plans for shallow gas and lost circulation.

Uploaded by

suharyanto anto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
45 views

RENGAT Mud Program - AMC

This document summarizes the mud program for two sections of a well: the top hole/PQ section from 0-60 metres, and the production/HQ section from 60-440 metres. For each section, it provides the hole diameter, depth, mud type, target mud properties, and mud additives and concentrations. It also lists mud volumes and costs. The top hole section uses a polymer/KCl mud with additives including Aus-Dex, Xan-Bore, potassium chloride, caustic soda and biocide. The production section recycles mud where possible and uses a similar mud with additional additives of Residrill for filtration control and contingency plans for shallow gas and lost circulation.

Uploaded by

suharyanto anto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

MUD PROGRAM / RENGAT

Hole CSG DEPTH VOLUME Mud Weight Funnel PV YP API Filtrate Total Hardness MBT ppb KCl Sand Bed
Well sections Mud Type pH
Dia " Dia" Metres Bbls ppg Vis s/qt cp lbs/100sqft mls/30 min as Ca++ m g/l bent equiv % w/w Test
PQ 4 60 6 Polymer / KCl ALAP 35-40 ALAP 9-15 <8 8.5-9.5 < 300 < 12.5 3-5 N/A
Engineering: Volumes bbl Mud Product Conc (ppb) Units Cost
* Pre-treat the makeup water with soda ash to remove any hardness and raise pH around 8.5-9.5. New hole (bbl) 6 AMC Biocide G 0.25 1
* Mix Xan-Bore at 0.4 ppb (1.2 kg/m3) and let to pre hydrate for 30 minutes. Dilution volume (bbl) 18 Aus-Dex 5 7
TOP HOLE / PQ * Mix Aus-Dex at 5 ppb (15 kg/m3) and let to pre hydrate for 30 minutes. Previous Casing volume (bbl) 0 Caustic Soda 0.25 1
* Mix Potassium Chloride at 18 ppb (54 kg/m3). Surface volume (bbl) 50 Potassium Chloride 18 24
* Mix Caustic Soda at 0.25 ppb (0.75 kg/m3) to reach the pH to 8.5 - 9.5. Total volume (bbl) 74 Xan-Bore 0.4 1
* Mix Biocide G at 0.25 ppb (0.75 kg/m3).
Lost of circulation contingency: 5-8 ppb Fracseal F + 8-12 ppb Fracseal M + 8-12 ppb Fracseal C. Cost / metre Total Cost
Hole CSG DEPTH VOLUME Mud Weight Funnel PV YP API Filtrate Total Hardness MBT ppb KCl Sand Bed
Mud Type pH
Dia " Dia" Metres Bbls ppg Vis s/qt cp lbs/100sqft mls/30 min as Ca++ m g/l bent equiv % w/w Test

HQ - 440 42 Polymer / KCl / Residrill ALAP 35-38 ALAP 6-9 <7 8.5-9.5 < 300 < 10 3-5 < 40

Engineering: Volumes bbl Mud Product Conc ppb Units Cost


Recycle mud from the previous interval (if possible). New hole (bbl) 42 AMC Biocide T 0.25 1
* Pre-treat the makeup water with soda ash to remove any hardness and raise pH around 8.5-9.5. Dilution volume (bbl) 132 Aus-Dex 5 17
PRODUCTION / * Mix Xan-Bore at 0.25 ppb (0.75 kg/m3) and let to pre hydrate for 30 minutes. Previous Casing volume (bbl) 2 Caustic Soda 0.25 1
HQ * Mix Aus-Dex at 5 ppb (15 kg/m3) and let to pre hydrate for 30 minutes. Surface volume (bbl) 50 Potassium Chloride 18 58
*Mix Residrill at 2 ppb abd let it to be well wetted by water. Recycled (bbl) 50 Residrill 2 15
* Mix Potassium Chloride at 18 ppb (54 kg/m3). New volume (bbl) 176 Xan-Bore 0.25 1
* Mix Caustic Soda at 0.25 ppb (0.75 kg/m3) to reach the pH to 8.5 - 9.5.
* Mix Biocide G at 0.25 ppb (0.75 kg/m3). Cost / metre Total Cost
Shallow gas and well control issues: Weigh up using sodium chloride up to 10 ppg / Lost of circulation contingency: 4-6 ppb Fracseal F + 5-8 ppb Fracseal M.

You might also like