LIFERAFT

1- CONTAINER:
a- Make certain that the container fitting portion in horizontally installed in place on the stand.
b- Check the container for possible damage or breakage in the exterior.
c- Check the portion at which upper and lower containers are fitted and other portion for possibly
deteriorated water-proof packing and for possibly wrong installation.
d- Check the container for possible damage to the external sealing and for installed condition
e- Check the characters indicated on the container for clarity.

2- LAUNCHING STAND:
a- Check the stand in its movable parts for possible rusting or paint stand
b- Check for possible rusting and deterioration the fixture ring to which the operating cord (red with hook)
is to be secured.

3- CONTAINER TYING(Lashing Wire Assembles) UNIT.

a-The tying unit comprises wire,turnbuckle,wire clip and shackle. Check them for a possible deterioration due
to corrosion,rusting,etc
b-Check the container lashing wire for possible looseness ,offset and any other abnormality tying.

4-OPERATING CORD (red rope)

a-Check the cord at its protruding out of the container for a possible breakage,change in quality
and other deterioration
b- Check the operation cord binding to launching stand for tying conditions(tightness or not),and for a possible
deformation,change in quality or any other abnormality.

5-AUTOMATIC RELEASE
a- Check the automatic for corrosion,rusting or foreign matter sticking to its movable parts.
b- Check and make certain that water inlet hall for automatic operation is not clogged with paint-grease,rust
of foreign matter (dirt and dust,etc).
c- Check the stand and its installation fixures for their fixing conditions(looseness of fitting bolts,etc)

MISCELLANEOUS
Do not use any other means(I,e.orinary rope,etc.)than the attached tying unit to tie the launching stand
in an emergency.

LIFEBOAT
MAINTENANCE FOR LIFEBOAT
OBJECTS PROCEDURE OPPORTU
WEEKLY

OUTER SURFACE
HULL
INNER SURFACE CHECK THE CRACK AND REPAIR IT IF
NECESSARY
OUTER SURFACE
CANOPY
INNER SURFACE
CHECK THE CRACK AND REPAIR IT IF
FRP NECESSARY
INNER STRUC-TURE
CHECK THE RUSTING AND PAINT IT IF
STEEL PARTS NECESSARY
CHECK THE OPERATION AND RUSTING
OPERATION UNIT SUPPLY WITH GREASE
HUDRROSTATIC CHECK THE OPERATION AND RUSTING
LOCK UNIT SUPPLY WITH GREASE
RELEASE MECHANISM
CHECK THE RUSTING AND SCRAPE
HOOK OFF IT IF NECESSARY
CHECK ON PANEL AND RENEW IT IF
ACCESS PANEL NECESSARY
CHECK THE OPERATION AND RUSTING
PAINTER RELEASE MECHANISM SUPPLY WITH GREASE
COMFIRM IT OPEN AND
CLOSED.SUPPLY WITH GREASE TO
EMBARKATION HATCH AND HINGE OF IT IF NECESSARY
EMERGENCY HATCH CHECK THE WATERTIGHTNESS RENEW
THE SEAL OF HATCH OR ADJUST THE
WEDGE OF HATCH CLIP IF NECESSARY

CHECK THE CRACK AND REPAIR IT IF

WINDOWS NECESSARY

OPERATE THE STEERING

WHEEL,CHECK THE BOLT OF CABLE
AND TILLER JOINT.

REMOTE STEERING MECHANISM

REMOTE STEERING MECHANISM CHECK THE RUSTING AND SUPPLY
WITH GREASE IT IF NECESSARY

CHECK CRACK OR BEND AND REPAIR

IT IF NECESSARY

CHECK THE WATERTIGHTNESS AND

RUDDER STOCK GLAND TIGHTEN THE NUT IF NECESSARY

CONFIRM THE OPERATION AND WIPE IT

BREATHER VALVE IF NECESSARY

CONFIRM THE OPERATION AND

SUC.VALVE SUPPLY WITH GREASE IT IF
NECESSARY

ENGAGE THE CLUTCH. WHILE

WATER SPRU RUNNING THE ENGINE.CHECK THE
PUMP WATER SPRAY PUMP.SUPPLY WITH
GREASE AT PUMP SHAFT

WATER SPRAY
SYSTEM
CHECK THE TENTION OF BELT AND
V-BELT
RENEW IT IF NECESSARY

CHECK THE WATER SPRAY PIPE&

WATER SPRY NOZZLE (DAMAGE, RUSTING) AND
PIPE&NOZZLE PAINT THE PIPE RENEW THE NOZZLE IF
NECESSARY

CHECK THE PRESSURE OF AIR BOTTLE

AIR BOTTLE
AND RECHARGE IT IF NECESSARY

CHECK THE LEAKE OF AIR PIPE AND

SELF-CONTAINED AIR AIR PIPE RENEW OR TIGHTEN THE NUT OF IT IF
SUPPORT SUSTEM NECESSARY

OPERATE THE HANDLE OF IT. CHECK

CONTROL DEVICE THE GAUGE AND OPERATION AND
RENEW IT IF NECESSARY

CHECK THE SHAFT AND REPAIR IT IF

SHAFT
NECESSARY

SHAFTING AND STERN TUBE

CHECK THE WATERTIGHTNESS AND
PROPELLER TIGHTEN IF NECESSARY

CHECK THE CRACK OR BEND AND

PROPELLER
REPIRE IT IF NECESSARY
SHAFTING AND
PROPELLER

CHECK THE CRACK OR BEND AND

PROPELLER
REPIRE IT IF NECESSARY

CHECK THE FUEL OIL LEVEL AND SUPPLY IT IF NECESSARY *

FUEL OIL TANK

DRAIN OT THE FUEL TANK WIHTOUT FAIL

OPERAT THE CONTROL HANDLE, CHECK THE OPERATION

IT AND CABLE JOINT AND TIGHTEN THE JOINT BOLTS IF *
ENGINE REMOTE NECESSARY
CONTROLS
CHECK THE RUSTING AND SUPPLY WITH GREASE IT IF
NECESSARY

CHECK THE DENSITY OF ELECTROLYTE OR VOLTAGE AND

RECHARGE IT IF NECESSARY
BATTERIES
CHECK THE ELECTRIC WIRE AND JOINT AND TIGHTEN IT IF
NECESSARU

SAFETY BELTS CHECK THE SAFETY BELT AND RENEW IT IF NECESSARY

SKATERS CHECK AND ADJUST IT IF NECESSARY *

HAND RAIL CONFIRM THE HAND RAIL AND REPAIR IT IF NECESSARY

PROVISION TANK CONFIRM THE PROV.TANK AND RENEW IT IF NECESSARU

RADAR
CONFIRM THE SART MOUNT ATTACHMENT AND RENEW IT
TRANSPONDER IF NECESSARY
MOUNT ATTACHMENT

DRAIN PLUG CONFIRM THE DRAIN PLUG AND RENEW IT IF NECESSARY

MANUALLY CONFIRM THE CANOPY LIGHT AND RENEW IT IF

CONTROLLED LAMP NECESSARY

ROOM LIGHT CONFIRM THE ROOM LIGHT AND RENEW IT IF NECESSARY

RETRO-REFLECTIVE CONFIRM THE RETRO-REFLECTIVE TAPE AND RENEW IT IF

TAPE NECESSARY
RETRO-REFLECTIVE CONFIRM THE RETRO-REFLECTIVE TAPE AND RENEW IT IF
TAPE NECESSARY

MAINTENANCE FOR LIFEBOAT EQUIPMENTS

OBJECTS PROCEDURE OPPORTU
WEEKLY

CHECK THE CRACK AND CORROSION AND RENEW IT IF

OARS NECESSARY

CRUTCHES CHECK THE CORROSION AND RENEW IT IF NECESSARY

CHECK THE CRACK AND CORROSION AND RENEW IT IF

BOAT HOOKS NECESSARY

BAILER CHECK THE CRACK AND RENEW IT IF NECESSARY

BUCKETS CHECK THE CRACK AND RENEW IT IF NECESSARY

SURVIVAL MANUAL CHECK THE DEFORMATION AND RENEW IT IF NECESSARY

COMPASS CHECK THE DAMAGE AND RENEW IT IF NECESSARY

SEA ANCHOR CHECK THE TEAR AND RENEW IT IF NECESSARY

PAINTERS CHECK THE DETERIORATION AND RENEW IT IF NECESSARY

HACHETS CHECK THE CORROSION AND RENEW IT IF NECESSARY

FRESH WATER CHECK QUALITY OF WATER AND RENEW IT IF NECESSARY

DIPPER CHECK THE CORROSION AND RENEW IT IF NECESSARY

DRINKING VESSEL CHECK THE CORROSION AND RENEW IT IF NECESSARY

CHECK THE EFFECTIVE PERIOD AND RENEW IT IF

FOOD RATION NECESSARY
 CHECK THE EFFECTIVE PERIOD AND RENEW IT IF
FOOD RATION NECESSARY

DAYLIGHT CHECK THE DAMAGE AND RENEW IT IF NECESSARY

SIGNALLING MIRROR

CHECK THE DRY BATTERY AND BULB AND RENEW IT IF

ELECTRIC TORCH NECESSARY

ROCKET
PARACHUTE,HAND CHECK THE EFFECTIVE PERIOD AND BULB AND RENEW IT
FLARES,SMOKE IF NECESSARY
SIGNALS

TABLE OF LIFESAVING CHECK THE DEFORMATION AND RENEW IT IF NECESSARY

SIGNAL

WHISTLE CHECK THE DAMAGE AND RENEW IT IF NECESSARY

FIRST-AID OUTFIT CHECK THE DEFORMATION AND RENEW IT IF NECESSARY

ANTI-SEASICKNESS CHECK THE DEFORMATION AND RENEW IT IF NECESSARY

MEDICINE

SEASICKNESS BAG CHECK THE DAMAGE AND RENEW IT IF NECESSARY

JACK-KNIFE CHECK THE CORROSION AND RENEW IT IF NECESSARY

TIN OPENERS CHECK THE CORROSION AND RENEW IT IF NECESSARY

BUOYANT RESCUE CHECK THE DAMAGE AND RENEW IT IF NECESSARY

QUOITS

MANUAL PUMP OPERATION CHECK AND RENEW IT IF NECESSARY

FISHING TACKLE CHECK THE DAMAGE AND RENEW IT IF NECESSARY

TOOLS CHECK THE CORROSION AND RENEW IT IF NECESSARY

PORTABLE FIRE CHECK THE EFFECTIVE PERIOD OF EXTINGUISHANT AND

EXTINGUISHING EQUIP RENEW IT IF NECESSARY

SEARCHLIGHT OPERATION CHECK AND RENEW IT IF NECESSARY

SEARCHLIGHT OPERATION CHECK AND RENEW IT IF NECESSARY

RADAR REFLECTOR CHECK THE DAMAGE AND RENEW IT IF NECESSARY

T.P.A CHECK THE TEAR AND RENEW IT IF NECESSARY

JACOBS LADDER CHECK THE DETERIORATION AND RENEW IT IF NECESSARY

MAINTENANCE AND INSPECTION PROCEDURE FOR HOUSING DAVIT

1. CONNECT THE ADDITIONAL LIFTING PIECE TO THE CRADLE OT THE DAVIT.
2. CONNECT THE ADDITIONAL LIFTING PIECE TO THE CRADLE OT THE DAVIT.
THE WIRE MUST HAVE TENSION.
3. CHECK THAT THE HYDROSTATIC LOCK IS AT THE SETTING POSITION.

HYDROSTATIC LOCK

1. APPLY GREASE TO THE CABLE WAYS TO MAKE THE MOVEMENT

SMOOTH.
2.CHECK THE BOLT OF CABLE CONNECTION
3. APPLY GREASE TO DRIVE SECTION OF HYDROSTATIC UNIT TO MAKE THE
MOVEMENT SMOOTH

RELESE MECHANISM

1. APPLY GREASE TO CABLE WAYS TO MAKE MOVEMENT SMOOTH.

2. APPLY GREASE THROUGH THE GREASE NIPPLE TO MAKE THE
OPERATION SMOOTH
3. APPLY GREASE TO HOOK AND HOOK STOPPER TO MAKE THE MOVEMENT
SMOOTH
4. APPLY GREASE TO THE SPRING OF LOCKING PIECE

WINCH FAILS TO HOLD BOAT

1. PULL ON FALLS WIRE AND TRY TO ROTATE WINCH IN LOWERING DIRECTION. WITH BRAKE LEVER LIFTED THIS
POSSIBLE.BUT WITH LEVER IN DOWN POSITION.THE CAM-CLUTCH SHOULD RESIST MOVEMENT IN LOWERING
DIRECTION.
2.CHECK THE DISK BRAKE LININGS FOR GREASE OR OIL. CLEAN AND RENEW.CHECK FOR WEAR, RENEW IF NECE

WINCH NOT FREE RUNNING

 WINCH NOT FREE RUNNING

1. CHECK THAT OIL IN GEARCASE IS OF CORRECT VISICOSITY AND LEVEL

2.CHECK
4. CHECKGEAR
THAT TEETH
BRAKEBREAKAGES
WITHDRAWALAND GEARCASE
MECHANISM ISFOR FOREIGN MATTER
FUNCTIONING. DISMANTLE
3. CHECK
BRAKE BEARINGS
LEVER FOR COLLAPSE.AND
AND CHECK BEARINGS
THAT CIRCLIP IS AND SHAFTS
NOT BROKEN FOR
OT BODLY RUST AND CORROSION
DISHED.CHECK
CIRCLIP ON INSIDE BEARING ALSO. IF DISTORITED RENEW.
5. CHECK THAT CAM-CLUTCH HAVE NOT BROKEN AND JAMMED CLUTCH MECHANISM THIS IS AVERY UNLIKELY O

LIFE BOUY
MONTHLY
1-CHECK THAT THE AL LIFEBUOY LOCATED IN THE APPROVED POSITION
2- CHECK CONDITION OF THE LIFE BOUY AND NO CRACKS
3- GRABLINES,RETRO-REFLECTIVE TAPES AND OTHER ATTACHMENTS TO BE RENEWED IF REQUIRED
4- TO MAKE SURE THAT ALL ATTACHMENTS ARE PROPERLY ATTACHED TO THE LIFE BUOY.
5- SHIP NAME , PORT OF REGISTERY ARE CLEARLY MARKED
6- M.O.B LIFEBOUY : CHECK THE STOWAGE POSITION , SLIPWAY , QUICK RELEASE PIN
7- SELF IGNITING LIGHT : MAKE SURE WORKING IN GOOD CONDITION

MANTENANCE
1- CLEANING: TO BE CLEANED USING FRESH/SOAPY WATER
2- CONDITION OF LIFEBUOYS AND NO CRACKS
3- GRABLINES,RETRO-REFLECTIVE TAPES AND OTHER ATTACHMENTS TO BE RENEWED IF REQUIRED
4- TO MAKE SURE THAT ALL ATTACHMENTS ARE PROPERLY ATTACHED TO THE LIFE BUOY.
5- RENEW THE BATTERIES EVERY 2 YEARS
6-CHECK THE FUNCTION OF THE LIGHT BY TURNING UPSIDE – DOWN

AFTER USE
MAKE SURE THAT THE BUOY PLACED IN THE CORRECT STOWAGE POSITION

LIFE JACKET
MONTHLY
1- CONDITION OF THE LIFE JACKET
2- CHECK THAT THE JOINTS ARE IN GOOD ORDER
3- THAT THE WHISTLE ATTACHED PROPERLY TO THE JACKET & WORKING IN GOOD ORDER
4- ATTACHMENT PROPERLY WHITH LIGHT & CHECK EXPIRY DATE FOR THE LIGHT
6- SHIP NAME & PORT OF REGISTERY
MANTENANCE
7- CLEAN THE LIFE JACKET USING FRESH,SOABY WATER
5- RENEW THE FASTENING TAPES & RETERO-REFLECTIVE TAPES IF THEY ARE WORN OR DAMAGED
4- ATTACHMENT PROPERLY WHITH LIGHT & CHECK EXPIRY DATE FOR THE LIGHT RENEW AFTER 5 YEAR FROM DATE OF M
4- THAT THE WHISTLE ATTACHED PROPERLY TO THE JACKET & WORKING IN GOOD ORDER
5- RENEW THE FASTENING TAPES & RETERO-REFLECTIVE TAPES IF THEY ARE WORN OR DAMAGED
5- RENEW THE FASTENING TAPES & RETERO-REFLECTIVE TAPES IF THEY ARE WORN OR DAMAGED
6- SHIP NAME & PORT OF REGISTERY
AFTER USE :
RINSE WITH FRESH WATER & MAKE SURE THAT THE JACKET COMPLETELY DRY BEFORE STOWING AWAY

IMMERSION SUIT
MONTHLY
1- CHECK THE NUMBER OFF IMMERTION SUIT & THEY ARE LOCATED IN APPROVED POSITION
2- REMOVE THE SUIT FROM THE BAGS , EXAMINE JOINTS OF THE SUIT & THE ZIPPERS
3- CHECK THE BATTERY INSTALLATION DATE (LABEL ON THE LUGHT)

AFTER USE :
1- RINSE WITH FRESH WATER AFTER EACH USE
2- AIR DRY THOROUGHLY BEFORE REPACKING IN STORAGE CASE
3- LUBRICATE ZIPPER WITH WAX STICK AFTER USE AND AT ANNUAL SELF-INSPECTION
4- STORE WITH ZIPPER FULLY OPEN
5- STORE IN COOL, CLEAN, DRY AREA
6- CHECK THAT ATTACHED PROPERLY WITH LIGHT/WHISTLE

T.P.A
1- CLEAN WITH MILD SOPE & WARM FRESH WATER AND DRY AFTER USE
2- FOLD EVENLY & PLACED IN THE POUCH PROVIDED
3- HOOD FASTENING CORD
(red with hook)

e deterioration due

t),and for a possible

paint-grease,rust
ching stand

BOAT
OPPORTUNITY
WEEKLY MONTHLY

*
*
*

*
*

*
*
*
*

*
*

*
 *

* *

* *

*
 *

QUIPMENTS
OPPORTUNITY
WEEKLY MONTHLY

*
*

*
 *

USING DAVIT

RAKE LEVER LIFTED THIS IS

VEMENT IN LOWERING

OR WEAR, RENEW IF NECESSARY

HIS IS AVERY UNLIKELY OCCURRENCE
R 5 YEAR FROM DATE OF MANUFACTURE