A Mini Project Report

On

Title of the Project

Submitted in partial fulfillment of the requirements of the degree of
BACHELOR OF ENGINEERING (Electronics &
Telecommunication)

by

Mr./Mrs. -----
Roll No:
Exam Seat No:

Guide
Prof. ……………………..

Department of Electronics & Telecommunication Engineering

Maulana Mukhtar Ahmad Nadvi Technical Campus,
Malegaon- 423 203
(May, 2022)
 CERTIFICATE

This is to certify that the mini project report entitled ‘Title of report’ submitted
by (____), in the partial fulfillment of the requirement for the award of degree
of Bachelor of Engineering (Branch name) of MMANTC, Malegaon, affiliated
to the Savitribai Phule Pune University is a record of his/her own work.

Name of the Guide Name of the Head

Name of the Department Name of the Department

Date :
Place :

Page |
 DECLARATION

We declare that this written submission represents my ideas in my own words

and where others' ideas or words have been included, I have adequately cited and
referenced the original sources. I also declare that I have adhered to all principles of
academic honesty and integrity and have not misrepresented or fabricated or falsified
any idea/data/fact/source in my submission. I understand that any violation of the
above will be cause for disciplinary action by the Institute and can also evoke penal
action from the sources which have thus not been properly cited or from whom
proper permission has not been taken when needed.

__________________________
_____ (Signature)

__________________________
______ (Name of
the student)

__________________________
______ (MIS No.)

Date:

Place:

Page |
 Abstract
Write your one page abstract (in paragraph) here. Make your abstract concise and
comprehensive. Your abstract should contain the following:
 Your project objectives.

 Your design requirements and constraints.

 Your design attempts. Make sure to illustrate your efforts even some of the
attempts did not achieve the requirements completely.

 Your final design specification

 Summary of your findings and results

 Your concluding remarks

Page |
 Acknowledgement
It is my great pleasure to acknowledge sense of gratitude to all, who have
made it possible for us to complete this mini project work with success. It
gives me great pleasure to express my deep gratitude to my Project guide
________ for his support and help from time to time during Project work.

It is my pleasure to acknowledge sense of gratitude to Head of Department

Dr. Salman Baig and co-ordinator Dr. Shamim Ahmad for their great
support and encouragement in seminar work. I would also like to thank my
Principal Dr. Naveed Husain for his valuable recommendations.

I would like to express my gratitude towards our dear parents for their support,
and constant encouragement.

At last but not in least, we would like to thank everyone who directly and
indirectly helped and motivated us to work on this project.

Page |
 Table of Contents

Project Abstract____________________________________________________________________
Acknowledgement__________________________________________________________________
Table of Contents___________________________________________________________________
List of Figures______________________________________________________________________
List of Tables______________________________________________________________________
1 Introduction___________________________________________________________________
1.1 Problem Formulation_________________________________________________________________
1.1.1 Problem Statement:_______________________________________________________________________
1.1.2 Problem Formulation:_____________________________________________________________________
1.2 Project Specifications_________________________________________________________________
2 Background___________________________________________________________________
2.1 Literature Review:___________________________________________________________________
2.2 Concept Synthesis____________________________________________________________________
2.2.1 Concept Generation:______________________________________________________________________
2.2.2 Concept Reduction:_______________________________________________________________________
2.3 Detailed Engineering Analysis and Design Presentation______________________________________
2.3.1 Cost Analysis_____________________________________________________________________________
2.3.2 Bill of Materials:__________________________________________________________________________
2.3.3 Hazards and Failure Analysis________________________________________________________________
3 Write the Title of Your Chapter__________________________________________________
3.1 Use of Styles________________________________________________________________________
4 Citing References______________________________________________________________
5 Conclusions and Future Work____________________________________________________
References_________________________________________________________________________
Appendices_________________________________________________________________________
Appendix A: Working with Endnote__________________________________________________

Page |
 List of Figures

Figure 1.1: Illustration of design management example.............................................................................................................

Figure 3.1: Illustration of the shape of a cylinder.......................................................................................................................

Page |
 List of Tables
Table 3.1: Dimensions of the cylinders considered....................................................................................................................

Page |
Page |