Scribd
Upload
114 views1 page

Electrical Plan For Restaurant V2-Model

This document provides a schedule of loads and short circuit analysis for a 1-37.5kVA, single phase pole mounted distribution transformer. It includes details on the grounding design, with a 5.5mm2 insulated copper grounding wire connected to a 5/8" copper grounding rod, noting the system resistance must not exceed 10 ohms and grounding components must be copper or copper clad.

Uploaded by

Mercy Gomez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
114 views1 page

Electrical Plan For Restaurant V2-Model

This document provides a schedule of loads and short circuit analysis for a 1-37.5kVA, single phase pole mounted distribution transformer. It includes details on the grounding design, with a 5.5mm2 insulated copper grounding wire connected to a 5/8" copper grounding rod, noting the system resistance must not exceed 10 ohms and grounding components must be copper or copper clad.

Uploaded by

Mercy Gomez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SCHEDULE OF LOADS SHORT CIRCUIT ANALYSIS

SOLVING FOR FAULT DUTY

DESIGN ANALYSIS

GROUNDING DESIGN

1-37.5kVA, 1Ø POLE MOUNTED DISTRIBUTION TRANSFORMER

PB-RES PANEL

5.5mm2 THHN wire


Insulated wire (Green)

#4 SOLDER LESS
CONNECTOR / CAD WELDING

5 / 8" COPPER CAD


GROUNDING ROD

NOTE:

1. THE GROUNDING SYSTEM RESISTANCE IS NOT HIGHER THAT


10 OHMS
2. GROUNDING ROD SHOULD BE COPPER OR COPPER CLAD
3. RESIDENTIAL GROUNDING CONDUCTOR SHALL BE
INSULATED AND THE SIZE IS AS PER PEC STANDARD.

You might also like