Operator’s Manual

Ursus
Operator’s Manual

C-385

THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF

URSUS OR IT’S SUCCESSORS. URSUS AND IT’S SUCCESSORS
ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS,
AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS.

UR-O-C385
 Eea I
URSIS IIARSIA"

HEELED fA 1

R I
 CONTENTS

Page
INTRODUCTION . . • . .. • . .. " 7
I. SPECIFICAnON • . 9
U. TRACTOR SERVICING • .. ~ . 11
1- inltial tractor starting . .. 17
2. Tractor runnlng·ln . 18
3. Aoutine inspection • " 19
4. Winter operation recommendations . . . . 22
S. Fire safety precautions . . ." . 23
6. Work safety and hygiene. .. 23
III. TRACTOR OPERATION .. 25
1. FUling in liquids and replenishing grease . 25
2. Setting the tractor for operation . .. 25
3. Tractor operation directives. . 26
3.1. Engine starting. • 26
3.2. Tract.or operation on the road. "
26
3.3. Brakes . . '28
3.4. P.T.O. shaft drive . 29
3.S. P.T.O. shaft application for the drive of various machines • "
31
3.S. Belt pulley drive . •. 31
3.7. Coupling trailed farm machines ·and implements. 32
3.8. Two-wheeled trailsr hitch setting. 34
3.9. Fam'l Implements moutmg • 3S
IV. INDIVIDUAL ENGINE ASSEMBLIES SERVICING.
1. lubrication system . . 31
1.1. Changing oil in the engine aU sump • 31
1.2. on filter cleaning . 31
2. Fuel supply system. . 38
2.1. fuel supply system bleeding • 39
2.2. Fuel supply pump sediment trap cleaning • 40
2.3. fuel filter servicing • 40

3
 Page
· 2.4. Injection pump and the speed governor • 42
2.5. Injector l'Iozzle cleanIng • 42
2.6. Injection commencement timing • 43
2.7. Air cleaner cleaning • 44
3. Cooling system • 45
4. Cylinder head and reciprocating parts • 47
4. t. Valve clearance check. al'ldsetting. . 41
4~2. Cylinder head .nuts tightening • 41
V. INDIVIDUAL CHASSIS· ASSEMBLIES SERVICING. . 49
1. .Power transmission unit 49
1.1. Engine clutch • 49
1.2. Clutch pedal free travel setting . , 49
1.3. Gearbox. final drive and hydraulic power lift . 51
1.4. Gearbox synchronizer brake adjustment . 52
1.5. Reduction gears. . 54
1.6. Belt pulley attachment. . 54
1.7. Driver's saddle. 55
1.8. Starting servo-mechanism . 56
2. Brakes. 57
2.1. Hydraulic brake system check and bleeding 51
2.2. Setting the clearance between the brake band and the torque
booster drum . 58
2.3. Hand brake adJustment. . 59
3. Front wheels. . 61
3.1. Wheel track change . 61
3.2. Front wheel toe-in • 61
3.3. Front wheel taper bearing play adjustment . 63
4. Rear wheels ". 63
5. Road wheels servicing . as
5.1. Tyre pressure . 65
5.2. Tyre inflation . 65
5.3. Filling tubes ~ith water. . 66
6. Hydraulic power lift. ." . 61
6.1. Control levers • 61
6.2. Internal circulation system • 68
6.3. External circulation system. . 69
6.4. Position control 7t
6.5. Power control • 71
6.6. Pressure control 72
6.1. External Circulation system hydraulic piping coupling •. 72

4
 Page
7. Electrical equipment 74
1.1. Master switch with key • 15
7.2. Fuse box • 71
7.S. Dynamo and voltage regulator servicing. 78
"7.4. Starter~motor servicing. • 78
7.5. Headlamp alignment . 80
7.6. Storage batteries . 80
8. Driver's cabin • 81
9. Pneumatic installation • 81
9.1. Air compressor unit • 81
9.2. Air oU aepan:stor • 82
9.3,. Air reservoir • 82
9.4. Pneumatic brake system . 83
VI. LUBRICATION CHART. . 85
1. aU grades • as
2. Solid gresse grades 87

5
 · INTRODUCTION

.The .URSUS .C-a8PtractorJs . designed for farmIng and road

transport Jobs~ AdvanCQ(t as ·tothede$fgn developments in~
corporated, the .tractor~atijre$t\numb~.of equip.mentnot used .
heretoioreintraetors operated In thiS country.

fi9.. 1 -- TractorURSUS C-385

ThiS necessitates a thorougnknow'edge of this service instruc-

tion. andthedirectivescontalnedherein being strictly observed.

7
The URSUS C-385 tractor Incorporates:
- 4-cyHnder Diesel engine,
- single-stage master clutch t and a separate multi-disc clutch
for the control of the P.T.O. shaft operation,
- a--speed gearbox to be ,equipped as en optional extra, with
a two-stage torque converter which augments the number of
speeds forward from 8 to 16, and- that of the reverse speeds
from 4 to 8 t while enabling at the same time changing the
transmission ratio under load. without to disengage the clutch.
- rigid or sprung front axle - optionally,
-~ power assisted steering system.
- independent disc type foot brakes,
- hydraulic power lift incorporating an automatic bottom link
control actiont

- two-seat, safe driver's cabin~ all enclosed. with interior heat~

ing instaUation~
- pneumatic system for the controi of trailer brakes.
- electrical equipment cornplying with the requirements of Road
Traffic Code.
Correct control is imperative for a satisfactory tractor perform-
ance, as well as for extending the periods of operation between
the repairs, and thus for extending the life of the tractor on the
whole.
Pleas9# quote in your enquiries concerning the operation. the
serial number and the year of production of the tractor involved.
The identification plate is fixed to the bracket underneath the
instrument panel.

8
 L SPECIFICATION

ENGINE

Type designation Z 7501

PerfC)fmanCe system four-stroke
Injection system direct
Number of cylinders four
CubiC capacity 4.562 !
Bcre/stroke D= 110 mm, S - 120 mm
Rated output 85 h.p. (SAE)
Working speed at rated output 2200 f.p.m.
Working speed at maximum torque 1500 r.p.m.
Compression ratio 17
Engine weight. dry 480 kg
Cooling system wet under forced circulation with
thermostat incorporated
Clearance values (on cold engine):
intake valves 0.3 +
0.05 mm
exhaust valves 0.3 + 0.05 mm
Firing order 1, 3, 4, 2
Injection pressure 160 + 3 kg/sq.cm

ENGINE EQUIPMENT
Fuel filter twin-barrel FD10RP2.4 (with KN 100
valve) felt-snd-paper Insert
011 pump gear type
Oil filter centr~fugal. full-flow type
Air cleaner VTCP 350, dry. stage 1 - multi-
cyclone, stage :2 -- paper cartridge
Injection pump PP4M85P'lA
Speed governor RVIM225/1100, mechanical
Fuel supply pump CD1M

9
Injector VP81 S453a 2555
Injector nozzle DOP1508525
Electrical equipment rated voltage 12 V
Starter motor power (type R7b) 4 h.p.
Dynamo 14 V 35 A
Voltage regulator 14 V 35 A
Storage battery 3SE-i90
Number of storage batteries two

AIR COMPRESSOR UNIT

Delivery at rated speed 165 ilmin

Rated pressure 6 kg/sq.cm

PNEUMATIC INSTALLATION FOR TRAILER BRAKE. CONTROL

Working pressure 5.8--6 kgisq.cm

POWER TRANSMISSiON

Clutch friction type, single disc, dry

Gearbox mechanical
Number of speeds fOrY<lard/reverse 814
Number of speeds with torque
converter applied forwardlreverse 16/8

Engine run hourmeter with rEnf~Colmter

f!exible shaft drive through gear train

transmission receiving
fuel supply pump shaft

REAR AXLE
Driven axle rear axle, through final
planetr:uy reduction gears
Differential mechanism locking devices provided

HYDRAULIC PO\VER LIFT P~ND IMPLEMENT LINKAGE SYSTEM

Mounted implement position control by means of three-point hitching

during operation system Incorporating automatic power
control action, position control and
oressure control system (optional)

10
Straka/bore S =165 Mm. D = 95 mm
Working pressure. ma.ximum 160 kg/aq.err.
Hydraulic pump delivery at 1BOO r.p.m. Q = 31 + 3.1 I/min
pump speed
Implement mounting system three-point linkage (in accordance
with ISO and CEMA recommenda-
tions)
Impiement hitching system drawbar offering two pOSitions and
five-positional clevis, towing hook
for h.vo-wheeled tisilers (options!),
hitching beam (optIonal)
Lifting force at the ends of bottom links 1700 kg
PermissIble vertical load on hitching 500 kg
bea,m or clevis end
Outer hydraulic system enabling supplyi.ng a Single--actlon Of
a doubh~-action cylinder (singie).
Provision Is also made for supplying
two double action cylinders.

TRACTIVE SYSTEM

Front suspension swivel-mounted axle.. 14!)30'

maximum swing
Rear suspension rigid
Front wheel toe-In 4 -.;;- 'to mm
Front wheel tyre size 7.5()., 16/6 PRI
Front wheel rim size S.50FX18
Rear wheel tyro size
- standard 16.9/14--34
-- optional extra 13.6/12-36
Rear wheel rim size
- standard W15-34
- optional extra W12-36

Steering mechanism ball-and-screw, power assisted

BRAKES

Main brake disc type, hydraulic control with

pressure compensator, independent.
acting on both rear wheels
Parking hand brake disc type. lever controlled

11
OTHER CHASSIS DATA

Front wheel track 1350, 1500. 1650, 1BOO mm

Rear wheel track - 16.9/14--34 1500. 1725 mm
(standard size)
Rear wheel track - 13.6/12-36 1350--'1875 mm (adjustable by steps,
(optional extra size) adjustable every 75 mm)
by steps
13.6/12-36 servo adjustable 1350-1875 mm (adjustable by steps,
every 75 mm. 1425--1950 mm fol-
lowing disc inversion)
16.9/14--34 servo adjustable 1425---2025 mm (adjustable steps,
every 75 mm)
Tractor ground clearance 420 mm
Minimum turning radius 3025 mm
with brakes applied
Two-wheeled trailer hitch height 715 mm. 815 mm
over ground surface
Rear P.T.O. shaft height 600 mm
over ground surface
Towing hook height over ground
surface. for tyre size:
13.6/12--36 695 mfr!, 795 mm
16.9/14-34 715 mm, 5 mm
Front hook height over ground
surface. for tyre Size:,
13.6/12--36 T! S mm
16.9/i 4--34 735 mm
Draw-bar pull, with ballast weights fitted, 3000
on dry concrete road surface

WEIGHTS AND LOADS

Dry weight of tractor, including

power 11ft. servo-mecanism, driver's
cab not included
Front axle load 11
Rear axle load 2100 kg
Minimum kerb weight of tractor, including 3700
hydraulic power 11ft. servo-mecanlsm
and hrtchlng beam
Front axle load 1290 kg
Rear axle load 2410 kg

12