Scribd
Upload
52 views

ITP Form Field CBR Test

This document contains the results of a CBR (California Bearing Ratio) field test conducted to evaluate the strength of subgrade, subbase, or base course materials for a new airport development project in Kediri, Indonesia. The test measured penetration of a piston into aggregate samples over time under increasing loads. Graphs show the penetration reached at various time intervals and load levels applied. Tables provide penetration percentages at 0.1 and 0.2 inches to determine the CBR value as a measure of material strength. The test was witnessed and approved by representatives of multiple companies involved in the airport project.

Uploaded by

betonk500
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
52 views

ITP Form Field CBR Test

This document contains the results of a CBR (California Bearing Ratio) field test conducted to evaluate the strength of subgrade, subbase, or base course materials for a new airport development project in Kediri, Indonesia. The test measured penetration of a piston into aggregate samples over time under increasing loads. Graphs show the penetration reached at various time intervals and load levels applied. Tables provide penetration percentages at 0.1 and 0.2 inches to determine the CBR value as a measure of material strength. The test was witnessed and approved by representatives of multiple companies involved in the airport project.

Uploaded by

betonk500
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PT MITRA GUNUNG MAKMUR

FIELD CBR TEST


Project Title : Airside Main Contract Work for New Airport Development at Kediri
Date of test : No Doc :
Location : STA :
Material Type : Subgrade / Subbase / Base Course Page : of
Aggregate A / Aggregate B

PENETRATION GRAPHICS
Time Penetration Reading Load
(Min) (mm) (inch) Dial (div) (lbs)
6000
0 0.0000 0.0000 0 #VALUE!
1/4 0.3175 0.0125
1/2 0.6350 0.0250
5000
1 1.2700 0.0500
1,1/2 1.9050 0.0750
2 2.5400 0.1000 4000

3 3.8100 0.1500
4 5.0800 0.2000
6 7.6200 0.3000 3000

8 10.1600 0.4000
10 12.7000 0.5000
2000

1000
CALIBRATION OF PROVING RING = 32,49 (Lbs)

0,1" x 100% = % %
3000 0
0.00 0.10 0.20 0.30 0.40 0.50
0,2" x 100% = % %
4500

Penetration (Inch)

,Prepared by ,Witnessed by ,Witnessed / Approved by ,Witnessed / Approved by ,Reviewed by


PT Mitra Gunung Makmur PT Wijaya Karya PT Eskapindo Matra PT Jagat Tribuana Sakti PT Surbana Jurong

___________________ ___________________ _____________________ ______________________ _____________________

You might also like