Service Information: December/99 II 58 10/99
Uploaded by
Marcelo GiussaniService Information: December/99 II 58 10/99
Uploaded by
Marcelo Giussaniservice information
Date: December/99 Distribution: II Substitues: Gr.: 58 Nr.: 10/99
if
Special tools
Gear box ZF 9S-75
For your knowledge we are listing below the special tools necessary for maintenance and repair of the gear box
ZF 9S-75 of which the indication and/or application is not yet included in the “Catalogue A - Special Tools”.
Tool Nº Group Denomination Obs.
Class
98 350 589 01 14 00 26C Mandrel to place the seal and the spline ring in the shifting system tower
1
cover.
343 589 00 15 00 26C Mandrel with cone to place the speed indicator connection seal. 1
98 350 589 13 15 00 26C Mandrel to remove the shifter housing guide bushing. 1
98 710 589 01 15 00 26C Mandrel to place the seal in the drive shaft centralization cover. 1
98 710 589 02 15 00 26C Mandrel to place the drive shaft retaining ring. 1
98 710 589 03 15 00 26C Mandrel to place the needle bushing in housings 1 and 2. 1
98 710 589 05 15 00 26C Mandrel to place the main shaft tapered roller bearing outer race. 1
98 718 589 07 15 00 26C Mandrel to install the seal in the output flange housing cover. 1
98 345 589 11 33 00 26C Basic extractor for extraction support. 1
98 350 589 05 33 00 26C Basic extractor for split ring. 1
98 718 589 04 34 00 26C Extraction support for the countershaft front tapered roller bearing inner
race, used together with 98 345 589 11 33 00. 1
98 718 589 06 34 00 26C Split ring for the main shaft tapered roller bearing, used together with 98 2
350 589 05 33 00.
98 718 589 07 34 00 26C Split ring for the countershaft rear tapered roller bearing inner race, used
2
together with 98 710 589 00 35 00.
98 718 589 08 34 00 26C Split ring for the drive shaft tapered roller bearing inner race, used togeth-
er with 98 718 589 02 35 00. 2
98 710 589 00 35 00 26C Basic extraction plate for the split ring. 1
98 718 589 02 35 00 26C Basic extraction plate for the split ring 2
98 718 589 03 59 00 26C Fastening bolt for output flange housing removal and installation (use in
2
the place of the pressure piece)
363 589 06 63 00 26B Device for pressing the output flange bolts safety plate. 1
710 589 03 63 00 26C Extraction ring to remove the second speed synchronizing body and gear. 1
000 589 26 33 00 00B Inner extractor with diameter 18.5 to 23.5mm to remove the needle bush-
ing of housings 1 and 2 (used together with 000 589 33 33 00 - counter- 1
support).
000 589 27 33 00 00B Inner extractor with diameter 24 to 30mm to remove the needle bushing of
the shifting system tower cover (used together with 000 589 33 33 00 - 1
counter-support).
000 589 30 33 00 00B Inner extractor with diameter 46 to 56mm to remove the main shaft ta-
pered roller bearing outer race (used together with 000 589 34 33 00 - 1
counter-support).
MERCEDES-BENZ DO BRASIL S.A. IN WHOLE OR PARTIAL REPRODUCTION
DIVISÃO ASSISTÊNCIA TÉCNICA PROHIBITED WITHOUT PREVIOUS
WRITTEN AGREEMENT
S.I. 58 - 10/99
Page 02
Tool Nº Group Denomination Obs.
Class
000 589 33 33 00 00B Counter-support. 1
000 589 34 33 00 00B Counter-support. 1
Obs.:
(1) = Tool used in other aggregates;
(2) = New tool.
For the acquisition of these tools, which will appear in the next supplement of “Catalogue A”, we ask to Dealers/
Authorized Service Stations to contact directly the Spare Parts Area of Mercedes-Benz do Brasil S.A. To Fleet
Owners and other interested parts we recommend to contact directly the nearest Dealer or that of their prefer-
ence.
We suggest that a copy of this circular letter be archived in the previously mentioned catalogue, after the separa-
tor Annexes.
MERCEDES-BENZ DO BRASIL S.A.
Service
