Company name: Shohel & Brothers PTE Ltd

Created by: Engr.Md.Nazmul Karim

Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024
Qty. Description
1 CR 5-9 A-A-A-E-HQQE
Product No.: 96556828

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint
particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment.
The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.
Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

Printed from Grundfos Product Centre [2024.08.006] 1/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024
Qty. Description
1

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.

The base is made of cast iron. The oval flanges are bolted to the base. The outlet side of the base has a combined
drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is
flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit breaker which
can be manually reset. The motor-protective circuit breaker must be set according to the rated current of the motor
(I1/1).
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point.
Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center.
Technical data

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s

Technical:
Pump speed on which pump data are based: 2896 rpm
Actual calculated flow: 5.279 m³/h
Resulting head of the pump: 49.85 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Cast iron

Printed from Grundfos Product Centre [2024.08.006] 2/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024
Qty. Description
1 EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Type of connection: Oval / Rp
Size of inlet connection: 1 1/4 inch
Size of outlet connection: 1 1/4 inch
Pressure rating for connection: PN 16
Flange size for motor: FT115

Electrical data:
Motor standard: IEC
Motor type: 90SD
Rated power - P2: 1.5 kW
Power (P2) required by pump: 1.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D V
Rated current: 3.3 A
Starting current: 750-820 %
Cos phi - power factor: 0.84-0.78
Rated speed: 2890-2910 rpm
IE Efficiency class: IE3
Motor efficiency at full load: 84.2-84.2 %
Motor efficiency at 3/4 load: 86.4-84.9 %
Motor efficiency at 1/2 load: 86.0-83.0 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U11906

Controls:
Frequency converter: None

Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.57
Net weight: 33.3 kg
Gross weight: 37.4 kg
Shipping volume: 0.092 m³

Printed from Grundfos Product Centre [2024.08.006] 3/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024

96556828 CR 5-9 A-A-A-E-HQQE 50 Hz

H CR 5-9, 3*400 V, 50Hz eta
[m] [%]

65

60

55

50 100

45 90

40 80

35 70

30 60

25 50

20 40

15 30

10 20

5 10

0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 Q [m³/h]
Q = 5.279 m³/h H = 49.85 m
n = 2931 rpm Pumped liquid = Water
Liquid temperature during operation = 20 °C Density = 998.2 kg/m³
Eta pump = 63.7 % Eta pump+motor = 54.6 %
P NPSH
[kW] [m]

1.5 P1 15

P2

1.0 10

0.5 5

0.0 0
P1 = 1.312 kW
P2 = 1.124 kW
NPSH = 1.7 m

Printed from Grundfos Product Centre [2024.08.006] 4/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024
H CR 5-9, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: CR 5-9 A-A-A-E-HQQE 65
60
Product No: 96556828 55
EAN number: 5700399031597 50 100

Technical: 45 90

Pump speed on which pump data are 40 80

2896 rpm
based: 35 70

Actual calculated flow: 5.279 m³/h 30 60

Resulting head of the pump: 49.85 m 25 50

20 40
Maximum head: 63.9 m
15 30
Stages: 9
10 20
Impellers: 9
5 10
Number of reduced-diameter impellers: 0
0 0
Low NPSH: N 0 1 2 3 4 5 6 7 8 Q [m³/h]
Pump orientation: Vertical Q = 5.279 m³/h H = 49.85 m
n = 2931 rpm Pumped liquid = Water
Shaft seal arrangement: Single
Density = 998.2 kg/m³ Eta pump = 63.7 %
Code for shaft seal: HQQE Eta pump+motor = 54.6 %
Liquid temperature during operation = 20 °C
Approvals: CE,EAC,UKCA,SEPR
O P NPSH
[kW] [m]
Approvals for drinking water: WRAS,ACS 1.5 P1 15
Curve tolerance: ISO9906:2012 3B
P2
Pump version: A 1.0 10
Model: A
Materials: 0.5 5
Base: Cast iron
Base: EN 1561 EN-GJL-200 0.0 0
P1 = 1.312 kW
Base: ASTM A48-25B P2 = 1.124 kW
Impeller: Stainless steel NPSH = 1.7 m

Impeller: EN 1.4301
20

50

145 180
220
160

75
100
465

M10 X4
140
x
2 3.5
2

RP1/2
G 1 1/4

G 1/2 135
281

110
178

Impeller: AISI 304 110

Material code: A 178

Code for rubber: E

Bearing: SIC
281

Installation:
Maximum ambient temperature: 60 °C 135
G 1/2
Maximum operating pressure: 16 bar G 1/2

Max pressure at stated temp: 16 bar / 120 °C

465

Max pressure at stated temp: 16 bar / -20 °C G 1/2

RP 1 1/4
22 M10 X 40
Type of connection: Oval / Rp
Size of inlet connection: 1 1/4 inch 4 x 13.5
20
50

Size of outlet connection: 1 1/4 inch 100 75

145 180
Pressure rating for connection: PN 16 160 220

Flange size for motor: FT115

Connect code: A
LOW VOLTAGE
Liquid: DIRECTION OF ROTATION

Pumped liquid: Water

Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s
L1
Electrical data: L2 L3

Motor standard: IEC HIGH VOLTAGE

DIRECTION OF ROTATION

Motor type: 90SD

Rated power - P2: 1.5 kW
Power (P2) required by pump: 1.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415D V
Rated current: 3.3 A L1 L2 L3

Printed from Grundfos Product Centre [2024.08.006] 5/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024

Description Value
Starting current: 750-820 %
Cos phi - power factor: 0.84-0.78
Rated speed: 2890-2910 rpm
IE Efficiency class: IE3
Motor efficiency at full load: 84.2-84.2 %
Motor efficiency at 3/4 load: 86.4-84.9 %
Motor efficiency at 1/2 load: 86.0-83.0 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: NONE
Motor No: 85U11906
Controls:
Frequency converter: None
Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.57
Net weight: 33.3 kg
Gross weight: 37.4 kg
Shipping volume: 0.092 m³

Printed from Grundfos Product Centre [2024.08.006] 6/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024

96556828 CR 5-9 A-A-A-E-HQQE 50 Hz

M10 X 40

13.5
RP 1 1/4

x
4

75

180
220
20
G 1/2

22

100
145
178

160
110

G 1/2

G 1/2
135

50

281 465

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2024.08.006] 7/8

 Company name: Shohel & Brothers PTE Ltd
Created by: Engr.Md.Nazmul Karim
Phone: +880 1730783460
Email: [email protected]
Date: 29/02/2024

96556828 CR 5-9 A-A-A-E-HQQE 50 Hz

LOW VOLTAGE
DIRECTION OF ROTATION

L1 L2 L3

HIGH VOLTAGE
DIRECTION OF ROTATION

L1 L2 L3

Note! All units are in [mm] unless others are stated.

Printed from Grundfos Product Centre [2024.08.006] 8/8