Scribd
Upload
140 views

Firmware Update SINAMICS S210 EN

This document provides instructions for updating the firmware on SINAMICS S210 converters. It describes the hardware requirements, recommended memory cards, how to prepare the SD card with the new firmware, and steps for performing the firmware update. When upgrading, previous settings are maintained, while downgrading resets the converter to factory defaults. The update process transfers the new firmware to the converter and connected DriveCliq components, and can take up to 5 minutes to complete.

Uploaded by

patulake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

Firmware Update SINAMICS S210 EN

This document provides instructions for updating the firmware on SINAMICS S210 converters. It describes the hardware requirements, recommended memory cards, how to prepare the SD card with the new firmware, and steps for performing the firmware update. When upgrading, previous settings are maintained, while downgrading resets the converter to factory defaults. The update process transfers the new firmware to the converter and connected DriveCliq components, and can take up to 5 minutes to complete.

Uploaded by

patulake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

s SINAMICS S210

Instructions for a Firmware Update of SINAMICS S210

SINAMICS S210 Firmware Update Instructions

You have got the possibility to upgrade the converter to a new firmware version. You can also downgrade
the converter to a previous firmware version, in order to deliver the machine with a constant firmware
version.
When upgrading the firmware the previous settings will be maintained.
When downgrading to a previous firmware the converter is reset to factory defaults.

Hardware Prerequisites

This description is valid for the following article numbers:

Main supply Power S210 article number as of Version Frame size


1AC 230V 100 W 6SL3210-5HB10-1UF0 V5.1 FSA
1AC 230V 200 W 6SL3210-5HB10-2UF0 V5.1 FSA
1AC 230V 400 W 6SL3210-5HB10-4UF0 V5.1 FSB
1AC 230V 750 W 6SL3210-5HB10-8UF0 V5.1 FSB
3AC 400V 400 W 6SL3210-5HE10-4UF0 V5.2 FSA
3AC 400V 750 W 6SL3210-5HE10-8UF0 V5.2 FSA
3AC 400V 1 kW 6SL3210-5HE11-0UF0 V5.2 FSA

These 1AC 230V converters support the SINAMICS Runtime firmware as of version V5.1.
These 3AC 400V FSA converters support the SINAMICS Runtime firmware as of version V5.2.

© Siemens AG 2018 – Unrestricted 13.02.2019 1/3


s SINAMICS S210
Instructions for a Firmware Update of SINAMICS S210

Memory cards for the Firmware Update

A SD-memory card is required for the firmware update.


Either you can use a memory card which is already plugged into the converter or a new memory card.
Alternatively you can order a memory card with software on which the desired firmware is already installed.

Card type Article number


Empty SD-Card 6SL3054-4AG00-2AA0
SD-Card with Firmware V5.1 6SL3054-4FB00-2BA0
SD-Card with Firmware V5.1 SP1 6SL3054-4FB10-2BA0
SD-Card with Firmware V5.1 SP1 6SL3054-4FB10-2BA0-Z F01
with Extended Safety License
SD-Card with Firmware V5.2 6SL3054-4FC00-2BA0
SD-Card with Firmware V5.2 6SL3054-4FC00-2BA0-Z F01
with Extended Safety License

These SD-Cards can also be used to store the licenses for functions which require licensing. (e. g. Extended
Safety License). It is not possible to use standard SD-card for this purpose.

Note
The integrated card reader only supports SD-cards up to a memory capacity of 2 GB.
SDHC- or SDXC-cards are not supported.

Preparing the SD-card for the Firmware Update

In order to install the software on the SD-card a SD-card reader is required in the PC/PG.

If you are using a SD-card with preinstalled firmware then you can directly proceed with the firmware update.

Backup of the SD-card

If you like to install software on a SD-card which is already plugged into the converter, then switch the
converter off and eject the SD-card.

Before installing new software on this SD-card it is absolutely necessary to save all directories/files of the
SD-card on your PC/PG. This especially applies to the installed licenses (directory KEYS, if available).

Preparing the SD-card

After backing up the SD-card content on the PC/PG you can delete all files from the memory card (if a
directory KEYS exists it does not need to be deleted).

Extract the ZIP-file with the firmware which you like to install onto the SD-card.

Copy the directory KEYS from the backup on your PC/PG back onto the SD-card (in case the directory
KEYS was available and has been deleted before).

© Siemens AG 2018 – Unrestricted 13.02.2019 2/3


s SINAMICS S210
Instructions for a Firmware Update of SINAMICS S210

Firmware Update

Attention:
Please do not turn off the power supply of the converter during the update process and do not disconnect the
motor (if it is connected)!
Doing so could lead to faulty components.

Please proceed as follows to perform a Firmware-Upgrade or –Downgrade:


1. Switch the converter off.
2. Insert the prepared SD-card into the converter and turn the converter on.
3. The new firmware will be installed – this can take up to 5 minutes and more.
The update has finished when both LEDs are blinking red synchronously every second.
4. Switch the converter off and remove the memory card as needed.
5. Switch the converter back on. The firmware of the connected DriveCliq-components will be updated.
This requires and additional power off/on (RDY-LED is blinking fast in yellow; refer to alarm
messages in the webserver).
6. Verify that the new firmware version was installed correctly. The firmware version is displayed on the
Home page of the webserver below the converter symbol.
7. Commission the converter if necessary.
8. In case the memory card shall remain plugged into the converter, save the parameters in the
webserver so that the actual configuration is stored on the memory card as well.

Extract LED-States

Please find further information concerning the LED states in the manual.

Interesting Links:

SINAMICS S210 Firmware


https://support.industry.siemens.com/cs/de/en/view/109744577

SINAMICS S210 PROFINET GSDML


https://support.industry.siemens.com/cs/de/en/view/109752524

© Siemens AG 2018 – Unrestricted 13.02.2019 3/3

You might also like