Scribd
Upload
26 views

SAPDesign MB12

This document contains output from a steel section check performed in SAP2000 on a UB610X305X149 beam. The check analyzes the beam under a major axis bending moment of 523,888.986 kN-mm at a location of 390.4 mm for stress, axial force, bending moment and shear capacity. All demand to capacity ratios are below the limit of 0.95, indicating the section is adequate.

Uploaded by

mrnaeem76
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

SAPDesign MB12

This document contains output from a steel section check performed in SAP2000 on a UB610X305X149 beam. The check analyzes the beam under a major axis bending moment of 523,888.986 kN-mm at a location of 390.4 mm for stress, axial force, bending moment and shear capacity. All demand to capacity ratios are below the limit of 0.95, indicating the section is adequate.

Uploaded by

mrnaeem76
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAP2000 Steel Design Project

Job Number
Engineer

BS5950 2000 STEEL SECTION CHECK


Combo : DSTL2
Units : KN, mm, C

Frame : 6 Design Sect: UB610X305X149


X Mid : -800.000 Design Type: Beam
Y Mid : 0.000 Frame Type : Moment Resisting Frame
Z Mid : 0.000 Sect Class : Class 1
Length : 1600.000 Major Axis : 0.000 degrees counterclockwise from local 3
Loc : 390.400 RLLF : 1.000

Area : 19000.000 SMajor : 4111691.332 rMajor : 257.416 AVMajor: 7226.320


IMajor : 1258999936.0 SMinor : 610761.232 rMinor : 69.992 AVMinor: 10007.600
IMinor : 93080008.000 ZMajor : 4590000.000 E : 205.000
Ixy : 0.000 ZMinor : 937000.000 Fy : 0.265

STRESS CHECK FORCES & MOMENTS


Location Pu Mu33 Mu22 Vu2 Vu3 Tu
390.400 0.000 523888.986 0.000 8.987 0.000 0.000

PMM DEMAND/CAPACITY RATIO


Governing Total P MMajor MMinor Ratio Status
Equation Ratio Ratio Ratio Ratio Limit Check
(4.8.3.3.1-1 0.481 = 0.000 + 0.481 + 0.000 0.950 OK

AXIAL FORCE DESIGN


Fc or Ft Pc Pt Pc Pc
Force Capacity Capacity Major Minor
Axial 0.000 4804.503 5035.000 4804.503 4935.312

MOMENT DESIGN
M Mc Mb K L m mLt
Moment Capacity Capacity Factor Factor Factor Factor
Major Moment 523888.986 1216350.000 1216350.000 1.000 6.000 1.000 1.000
Minor Moment 0.000 194222.072 1.000 1.000 1.000

SHEAR DESIGN
Fv Pv Stress Status Tu
Force Capacity Ratio Check Torsion
Major Shear 8.987 1148.985 0.008 OK 0.000
Minor Shear 0.000 1718.505 0.000 OK 0.000

SAP2000 v10.0.5 - File: January 4, 2007 22:45

You might also like