Scribd
Upload
171 views

Harris Tip Chart Acetylene

This document provides charts for Harris cutting tip sizes for oxy-acetylene cutting of various material thicknesses. It lists the recommended tip size, oxygen and acetylene gas pressures, and orifice drill sizes for light gauge steel up to 12 inches thick. It also notes that 3/8 inch ID hoses should be used for tip sizes 4 and larger, and recommends a cleaning product for removing spatter and debris from the tips.

Uploaded by

dfcreighton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views

Harris Tip Chart Acetylene

This document provides charts for Harris cutting tip sizes for oxy-acetylene cutting of various material thicknesses. It lists the recommended tip size, oxygen and acetylene gas pressures, and orifice drill sizes for light gauge steel up to 12 inches thick. It also notes that 3/8 inch ID hoses should be used for tip sizes 4 and larger, and recommends a cleaning product for removing spatter and debris from the tips.

Uploaded by

dfcreighton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Harris Cutting Tip Charts

ACETYLENE

6290-& 6290-S Tips for Oxy-Acetylene


Cutting
Plate 6290 6290-s Acetylene
Oxygen Orifice
Thickness Tip Tip Pressure
(PSIG) (# Drill
(Inches) Size Size (PSIG)
Size)
Light gauge to 0.187 000 - 15-20 5-15 #68
.187 to .375 00 - 20-25 5-15 #64
.375 to .625 0 - 35-40 5-15 #60
.625 to 1.000 1 1S 35-40 5-15 #56
1-2 2 2S 40-45 5-15 #52
2-3 3 3S 45-50 5-15 #48
3-6 4 4S 50-75 10-15 #42
6-8 - 5S 65-80 10-15 #35
8-12 - 6S 70-90 10-15 #30

6290-AC Tips for Oxy-Acetylene


Cutting
Plate 6290-AC Acetylene
Oxygen Orifice
Thickness Tip Pressure
(PSIG) (# Drill
(Inches) Size (PSIG)
Size)
.187 to .375 00AC 15-30 5-15 #64
.375 to .625 0AC 20-25 5-15 #60
.625 to 1.000 1AC 30-50 5-15 #56
1-2 2AC 40-65 5-15 #53
2-4 3AC 40-65 5-15 #52
4-7 4AC ** 50-80 5-15 #42
7-10 5AC ** 65-80 5-15 #35
10-12 6AC ** 70-95 5-15 #31

NOTE:
** To provide required flow, use 3/8" I.D. hose for size 4 and larger
CLEANING:
Use Harris E-9 (P/N 9000160) for cleaning preheat holes and removing spatter from tip face.
For additonal information refer to www.harrisproductsgroup.com

Retro Systems 430 Clay Valley Center, KS 67147


P (316) 755‐3683 F (316) 755‐1675 www.retroplasma.com

You might also like