Phone Guide

Cisco IP Phone 7960G and 7940G for Cisco CallManager 4.1(3)

Including License and Warranty

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100

Viewing and Dialing Calls

If you want to... Then... Redial the last number View your call logs Dial from a call log Edit a number in a call log Dial from a corporate directory Press Redial.

SoftKey Definitions
AbbrDial Answer Dial using a speed dial index number Answer a call Add yourself to a call on a shared line Receive notification when a busy extension becomes available Cancel an action or exit a screen without applying changes Add yourself to a call on a shared line and establish a conference call Setup/cancel call forwarding Delete records or settings View conference participants Create a conference call Restore settings (including volume) to original factory values Remove characters to the right of the cursor when using EditDial Dial an entered phone number Transfer two calls to each other Edit a number in a call log Disconnect current call Return to the previous screen Answer a call on another extension outside your group Join several calls on one line to create a conference call Host a Meet-Me conference call

Choose > Missed Calls, Received Calls, or Placed Calls. Scroll to a listing from the call log, edit the number (if needed), and go off-hook. Press EditDial followed by << or >> to reposition the cursor or erase digits. Choose > Corporate Directory. Enter the first few letters and press Search. Then scroll to a listing and go off-hook. Press New Call and enter a number. Or, press before or after dialing, re-dialing or speed dialing a number. Press New Call. The original call is placed on hold automatically.

Barge CallBack

Quick Reference
Cancel cBarge

CFwdALL Clear ConfList Confrn

Dial using the speakerphone

Cisco IP Phone 7960G and 7940G

SoftKey Definitions Button Definitions Transferring a Call Using Call Forward Making Conference Calls Viewing and Dialing Calls

Default

Delete Dial DirTrfr EditDial EndCall Exit GPickUp Join MeetMe

Place a call while another call is active

Copyright 2005 Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries. All other brands, names, or trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0501R)

OL-4637-03

More NewCall Park PickUp Private

Display additional softkeys Make a new call Store a call using Call Park Answer a call on another extension in your group Allow/disallow others from viewing or barging calls on a shared line Submit call problems to the system administrator Redial the most recently dialed number Remove a conference participant Restore settings (including volume) to previously saved values Resume a call on hold Drop the last party added to conference call Save the chosen settings Search for a directory listing Select an item on the screen Transfer a call Refresh content and get the latest information Delete entered characters Move through entered characters

Button Definitions
Messages Services or Help Directories Settings Speaker Mute Headset

Using Call Forward

If you want to... Set up call forwarding for your primary line Set up or cancel call forwarding from your computer (for any line) Cancel forwarding Then... Press CFwdALL and enter a target phone number. Log in to your User Options web page and choose Forward all calls... from the main menu. Press CFwdALL.

QRT Redial Remove Restore

Making Conference Calls

If you want to... Then... Start a standard conference call by calling participants During a connected call, press more > Confrn to add another party to the call. Dial the participants number. After connecting, press Confrn again. Repeat to add each participant. Scroll to each target call on the line and press Select. From a selected call, press more > Join. Choose an active conference and press ConfList. An * indicates the initiator. If you are the conference initiator, you can press RmLstC or scroll to a name in the conference list and press Remove.

Resume RmLstC Save Search Select Trnsfer Update << >>

Transferring a Call
If you want to... Transfer a call Then... During a connected call, press Transfer and enter the target number. When you hear the call ringing, hang up or press Transfer and hang up. Scroll to each target call on the line and press Select. From one of the selected calls, press more > DirTrfr. To stay on the line with callers, use Join to create a conference instead.

Invite current callers to join a standard conference View a list of participants Remove a participant from the conference

Transfer two current calls to each other (direct transfer)

Contents
Getting Started 1 How to Use this Guide 1 Safety and Performance Information 2 Cleaning the Phone Screen 4 Where to Find Additional Information 4 More Information about Customizing Your Phone on the Web 4 Connecting Your Phone 5 An Overview of Your Phone 8 Buttons and Hardware 8 Phone Screen Features 11 Understanding Feature Functionality and Availability 12 Call-Handling and Navigation Tips 12 Going On-Hook and Off-Hook 12 Understanding Lines vs. Calls 12 Understanding Call Icons 13 Selecting Calls 13 Viewing Calls and Switching Between Calls 14 Choosing Phone Screen Items 15 Using Feature Menus 15 Entering and Editing Text 15 Getting Help on Your Phone 16 Understanding Button Icons 16 Basic Call Handling 17 Placing a Call 17 Answering a Call 20

Cisco IP Phone 7960G and 7940G

iii

Ending a Call 21 Using Hold and Resume 21 Using Mute 21 Transferring a Connected Call 22 Forwarding Your Calls to Another Number 23 Making Conference Calls 24 Types of Supported Conference Calls 24 Starting and Joining a Standard Conference 25 Starting or Joining a MeetMe Conference Call 26 Advanced Call Handling 27 Storing and Retrieving Parked Calls 27 Picking Up Redirected Calls on Your Phone 27 Using a Shared Line 29 Understanding Shared Lines 29 Adding Yourself to a Shared-Line Call 30 Preventing Others from Viewing or Barging a Shared-Line Call 31 Tracing Suspicious Calls 31 Making and Receiving Secure Calls 32 Prioritizing Critical Calls 33 Using a Handset, Headset, and Speakerphone 34 Obtaining a Headset 34 Using AutoAnswer with a Headset or the Speakerphone 35 Customizing Phone Settings 36 Adjusting the Volume 36 Customizing Rings and Message Indicators 37 Customizing the Phone Screen 37 Setting Up Speed Dial Features 38 Using Voice Messaging, Call Logs, and Directories 39 Accessing Voice Messages 39 Using Call Logs and Directories 40

iv

OL-4637-03

Accessing Your User Options Web Pages 41 Logging In to the User Options Web Pages 41 Subscribing to Phone Services 42 Understanding Additional Configuration Options 43 Troubleshooting Your Phone 45 Using the Quality Reporting Tool 45 Cisco One-Year Limited Hardware Warranty Terms 46 Index 49

Cisco IP Phone 7960G and 7940G

vi

OL-4637-03

Getting Started
How to Use this Guide
This guide provides you with an overview of the features available on your phone. You can read it completely for a solid understanding of your phones capabilities, or refer to the table below for pointers to commonly used sections.

If you want to...

Explore your phone on your own Review safety information Connect your phone Learn about the display

Then
Press i or on the phone when you need assistance. See the Safety and Performance Information section on page 2. See the Connecting Your Phone section on page 5. See the Phone Screen Features section on page 11.

Use your phone after it is installed Start with the An Overview of Your Phone section on page 8. Select calls or switch between calls See the Call-Handling and Navigation Tips section on page 12. Make calls Put calls on hold Mute calls Transfer calls Make conference calls Share a phone number See the Placing a Call section on page 17. See the Using Hold and Resume section on page 21. See the Using Mute section on page 21. See the Transferring a Connected Call section on page 22. See the Making Conference Calls section on page 24. See the Using a Shared Line section on page 29.

Use your phone as a speakerphone See the Using a Handset, Headset, and Speakerphone section or switch between audio devices on page 34. Change volume levels or the ringer See the Customizing Phone Settings section on page 36. sound Set up speed dialing View your missed calls See the Setting Up Speed Dial Features section on page 38. See the Using Voice Messaging, Call Logs, and Directories section on page 39.

Cisco IP Phone 7960G and 7940G

Safety and Performance Information

Installing and Using Your Phone Read the following safety notices before installing or using your Cisco IP Phone:
Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. SAVE THESE INSTRUCTIONS

Warning

Read the installation instructions before you connect the system to its power source.

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Warning

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution when connecting cables.

Caution

Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24 AWG communication cable.

Warning

The power supply must be placed indoors.

OL-4637-03

Getting Started

Using an External Power Supply

The following warnings apply when you use the external power supply with the Cisco IP Phone:

Warning

This product relies on the building's installation for short-circuit (over current) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors).

Warning

The device is designed to work with TN power systems.

Warning

The plug-socket combination must be accessible at all times because it serves as the main disconnecting device.

Caution

Only use the Cisco specified power supply with this product.

Using External Devices with Your Cisco IP Phone The following information applies when you use external devices with the Cisco IP Phone:
Cisco recommends the use of good quality external devices (speakers, microphones, and headsets) that are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions: Move the external device away from the source of the RF or AF signals. Route the external device cables away from the source of the RF or AF signals. Use shielded cables for the external device, or use cables with a better shield and connector. Shorten the length of the external device cable. Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. In European Union countries, use only external speakers, microphones, and headsets that are fully compliant with the EMC Directive [89/336/EC].

Caution

Cisco IP Phone 7960G and 7940G

Cleaning the Phone Screen

Gently wipe the phone screen with a soft, dry cloth. Do not use any liquids or powders on the phone. Using anything other than a soft, dry cloth can contaminate phone components and cause failures.

Where to Find Additional Information

You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com/ International Cisco websites can be accessed from this URL: http://www.cisco.com/public/countries_languages.shtml

More Information about Customizing Your Phone on the Web

Your Cisco IP Phone is a network device that can share information with other network devices in your company, including your computer. You can use your Cisco CallManager User Options web pages to establish and customize phone services and to control phone features and settings from your computer. This guide provides a brief overview of these capabilities. For complete instructions, refer to Customizing Your Cisco IP Phone on the Web at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

OL-4637-03

Connecting Your Phone

Connecting Your Phone

Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone.

AUX

10/100 SW

10/100 PC

+
DC48V

2 3 4
1 2 3 4

7 6 5
113656

DC adaptor port (DC48V) for phones not provided with inline power AC-to-DC power supply AC power cord Network port (10/100 SW) for connecting to the network

5 6 7 8

Access port (10/100 PC) for connecting your phone to your computer Handset port Headset port Footstand button

Cisco IP Phone 7960G and 7940G

Adjusting the Footstand

To change the angle that your phone sits on your desktop, adjust the footstand while pressing the footstand button.

Adjusting the Handset Rest When you connect your phone, you might want to adjust the handset rest to ensure that the receiver will not slip out of the cradle. See the table below for instructions.
1 2 3

1 2 3

Set the handset aside and pull the square plastic tab from the handset rest. Rotate the tab 180 degrees. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest.

Registering with TAPS After your phone is connected to the network, your system administrator might ask you to auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used for a new phone or to replace an existing phone.
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts. You might need to enter your entire extension, including the area code. After your phone displays a confirmation message, hang up. The phone will re-start.

Headset Information To use a headset, connect it to the headset port on the back of your phone.
Although Cisco Systems performs some internal testing of third-party headsets for use with the Cisco IP Phones, Cisco does not certify or support products from headset or handset vendors. Because of the inherent environmental and hardware inconsistencies in the locations where Cisco IP Phones are

120521

OL-4637-03

Connecting Your Phone

deployed, there is not a single best solution that is optimal for all environments. Cisco recommends that customers test the headsets that work best in their environment before deploying a large number of units in their network. In some instances, the mechanics or electronics of various headsets can cause remote parties to hear an echo of their own voice when they speak to Cisco IP Phone users. Cisco Systems recommends the use of good quality external devices, like headsets that are screened against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as cell phones and two-way radios, some audio noise may still occur. See the Using External Devices with Your Cisco IP Phone section on page 3 for more information. The primary reason that a particular headset would be inappropriate for the Cisco IP Phone is the potential for an audible hum. This hum can be heard by either the remote party or by both the remote party and you, the Cisco IP Phone user. Some potential humming or buzzing sounds can be caused by a range of outside sources, for example, electric lights, being near electric motors, large PC monitors. In some cases, a hum experienced by a user may be reduced or eliminated by using a local power cube (CP-PWR-CUBE-2). See the Using an External Power Supply section on page 3 for more information. Subjective to the User Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good to you (the user) and to the party on the far end. Sound is subjective and Cisco cannot guarantee the performance of any headsets or handsets, but some of the headsets and handsets on the sites listed below have been reported to perform well on Cisco IP Phones. Nevertheless, it is ultimately still the customer's responsibility to test this equipment in their own environment to determine suitable performance. For information about headsets, see: http://vxicorp.com/cisco http://plantronics.com

Cisco IP Phone 7960G and 7940G

An Overview of Your Phone

The Cisco IP Phone 7960G or 7940G is a full-feature telephone that provides voice communication over the same data network that your computer uses, allowing you to place and receive phone calls, put calls on hold, speed dial numbers, transfer calls, make conference calls, and so on. In addition to basic call-handling features, your phone supports specialized or advanced telephony features that can extend and customize your call-handling capabilities. Your Cisco IP Phone also provides you with: Access to network data and servicesYou can access specialized web-based services from your phone Online control from your User Options web pagesYou can customize your phones features using a web browser on your computer An online help systemYou can obtain information about features, buttons, softkeys, and menu items directly from your phone

Buttons and Hardware

Some of the hardware features on your Cisco IP Phone include: Buttons for speakerphone mode and headset mode Four softkey buttons for access to telephony features Four feature buttons for access to messages, directories, services, and settings Programmable buttons for phone lines, features, speed-dial numbers, and services A help button for on-the-spot information Refer to the following illustrations and table for details.

OL-4637-03

An Overview of Your Phone

Figure 1

Cisco IP Phone 7960

2 1

5 6 7 8 9
68561

17 16 15 14 13 12 11 10

Figure 2

Cisco IP Phone 7940

2 1

5 6 7 8 9
68562

17 16 15 14 13 12 11 10

1 2

Handset light strip Indicates an incoming call or new voice message. Phone screen Shows phone features. See the Phone Screen Features section on page 11.

Cisco IP Phone 7960G and 7940G

3 4

Model type Programmable buttons

Indicates your Cisco IP Phone model. Depending on configuration, programmable buttons provide access to: Phone lines (line buttons) Speed-dial numbers (speed-dial buttons) Web-based services (for example, a Personal Address Book button) Phone features (for example, a Privacy button)

5 6 7 8 9

Footstand button

Allows you to adjust the angle of the phone base.

Directories button Opens/closes the Directories menu. Use it to access call logs and corporate directories. See the Using Call Logs and Directories section on page 40. Help button i or Settings button Speaker button Activates the Help menu. See the Getting Help on Your Phone section on page 16. Opens/closes the Settings menu. Use it to control phone screen contrast and ring sounds. See the Customizing Phone Settings section on page 36. Toggles the speakerphone on or off. Toggles the Mute feature on or off. Toggles the headset on or off. Controls the volume and other settings. See the Customizing Phone Settings section on page 36. Opens/closes the Services menu. See the Accessing Your User Options Web Pages section on page 41. Typically auto-dials your voice message service (varies by service). See the Accessing Voice Messages section on page 39.

10 Mute button 11 Headset button 12 Volume button 13 Services button 14 Messages button

15 Navigation button Allows you to scroll through menus and highlight items. Use in conjunction with softkeys to activate highlighted items.

16 Keypad 17 Softkey buttons

Allows you to dial phone numbers, enter letters, and choose menu items. Each activates a softkey option (displayed on your phone screen).

10

OL-4637-03

An Overview of Your Phone

Phone Screen Features

This is what your main phone screen might look like with an active call. The table below provides a basic overview of phone screen features.

1 2

Primary phone Displays the phone number (extension number) for your primary phone line. line Programmable Indicate the configuration for programmable buttons on your phone: button labels Phone linesEach corresponds to a line button. You might have one line or multiple lines assigned to your phone. Speed-dial numbersEach corresponds to a speed-dial button. See Setting Up Speed Dial Features section on page 38 for details. Phone servicesEach corresponds to a web-based phone service. (For example, a Personal Address Book button). Phone featureEach corresponds to a specific feature. (For example, a Privacy button.)

3 4 5

Softkey labels Status line Call activity area

Each displays a softkey function. Activate a softkey by pressing corresponding softkey button). Displays audio mode icons, status information, and prompts.

(the

Displays current calls for the highlighted line and includes detailed information such as caller ID, call duration, and call state. (In the illustration above, line 6060 is highlighted.) See the Viewing Calls and Switching Between Calls section on page 14 for related information.

Cisco IP Phone 7960G and 7940G

11

Understanding Feature Functionality and Availability

The operation of your Cisco IP Phone and the features available to you may vary, depending on the call processing agent used by your company and also on how your companys phone support team has configured your phone system. Therefore, some of the features included in this Phone Guide might not be available to you or might work differently on your phone system. Contact your support desk or system administrator if you have questions about feature operation or availability.

Call-Handling and Navigation Tips

These guidelines can help you handle calls and navigate menus on your Cisco IP Phone.

Going On-Hook and Off-Hook

Some phone tasks and instructions differ depending on whether the phone is on-hook or off-hook. On-HookThe phone handset is resting in the cradle, no calls are active, and you do not have an active dial tone. Your phone provides on-hook dialing, which enables you to enter or choose phone numbers before activating the call. When your phone is on-hook, this icon appears next to each phone line: Off-HookThe phone handset is lifted from the cradle, the speakerphone is active, or any of several other methods are used to get a dial tone or to answer an incoming call. When your phone is off-hook, this icon appears next to the appropriate phone line:

Understanding Lines vs. Calls

It is sometimes easy to confuse lines and calls on your phone. Use these tips to avoid confusion:

Lines The Cisco IP Phone 7960G supports up to six lines and the Cisco IP Phone 7940G supports up to two lines. The number of lines available on your phone depends on how your system administrator has configured your phones programmable buttons. To see how many lines you have, look at the line area of your phone screen. You have as many lines as you have phone numbers. Calls Each line can support multiple calls. Therefore, you might find yourself handling several calls on one phone line. The default configuration is four calls per line, but your system administrator can adjust this number according to your needs. Regardless of the number of lines, your phone supports a maximum of 200 calls at a time.

12

OL-4637-03

An Overview of Your Phone

Understanding Call Icons

Your phone displays icons to help you determine the call state (whether the call is on hold, ringing, connected, and so on). Call state icons appear in the call activity area next to specific calls.

Icon

Call State

Description

Connected call You are currently connected to the other party. Many phone features require that you have a connected call. Incoming call, ringing Outgoing call, ringing Call on hold Outgoing call, busy line Remote-in-use Authenticated call Encrypted call An incoming call is ringing on one of your lines. See the Answering a Call section on page 20 for details. An outgoing call is ringing on the other partys line. See the Placing a Call section on page 17 for details. You have put this call on hold. (When displayed next to a phone line, this icon indicates that all calls on the line are on hold.) The outgoing call that you placed has reached a busy line. Another phone that shares your line has a connected call. See the Using a Shared Line section on page 29 for details. See the Making and Receiving Secure Calls section on page 32 for a description of this icon. See the Making and Receiving Secure Calls section on page 32 for a description of this icon.

Selecting Calls
Many phone features require that you select the calls you want to use with a particular feature. For example, if you have four held calls, but only want to join two of them to a conference call, you can select the calls that you want to add to the conference before activating the feature.

If you want to...

Highlight a call Select a call

Then...
Use the Navigation button to scroll through the call list. Highlighted calls appear slightly darker than other calls. Highlight a connected or held call and press Select. Selected calls are indicated with a next to them. Use the Navigation button to scroll through the list of calls. Selected calls are indicated with a and are grouped together in the call list.

Verify selected calls

Cisco IP Phone 7960G and 7940G

13

Viewing Calls and Switching Between Calls

These tips can help you switch between calls on one or more lines. If the call you want to switch to is not automatically highlighted, use the Navigation button to scroll to it.

If you want to...

Then...

Switch between calls on Highlight the call you are switching to and press Resume. The other call is one line placed on hold automatically. Switch from a connected call to answer a ringing call Press Answer or press for the line with the incoming call. Doing so automatically places the first call on hold.

Switch between calls on Press for a line that has a call on hold. (The line displays the .) If there is a single call holding on the line, it will different lines call-on-hold icon resume automatically. If there are multiple calls holding on the line, scroll to the specific call (if necessary) and press Resume. See all calls on a specific line See an overview of line activity (one call per line) Press i or , then immediately press the line button. Doing so shows call details but will not impact the call state; it is therefore useful if you are talking on one line and want to view held calls on another line. Press for the highlighted line. (A line appears highlighted when the calls associated with it are displayed on the phone screen.) Doing so prompts the phone to switch to call overview mode and display one call per line. This call is either the active call or, if all calls are on hold, the held call with the longest duration. To return to the standard view, press i or line button. , then immediately press the

Tips Only one call can be active; other calls will be placed on hold automatically.
When you have multiple calls on one line, calls with the highest precedence and longest duration display at the top of the call list. See the Prioritizing Critical Calls section on page 33. Calls of a similar type are grouped together in the call list. For example, calls that you have interacted with are grouped near the top, selected calls are grouped next, and calls that you have not yet answered are grouped last.

14

OL-4637-03

An Overview of Your Phone

Choosing Phone Screen Items

To choose an item on the phone screen...
By scrolling By item number

Do this...
Press the Navigation button to highlight an item in a list. Press a relevant softkey such as Select or Dial to finish the action. Press the corresponding number on your keypad. For example, press 4 to choose the fourth item in a menu.

Using Feature Menus

If you want to...
Open or close a feature menu

Then...
Press a feature button: Messages Services Directories Settings

i or
Scroll through a list or menu Go back one level in a feature menu

Help

Press the Navigation button. Press Exit. (Note that if you press Exit from the top-level of a menu, the menu will close.)

Entering and Editing Text

If you want to...
Enter a letter on your phone screen Delete within an entry or move your cursor

Then...
Press the appropriate keypad number one or more times to select a letter (with or without capitalization) from the pop-up menu. When you pause, the cursor automatically advances to allow you to enter the next letter. Press << or Delete to remove a letter or digit. Press >> to move the cursor to the right.

Cisco IP Phone 7960G and 7940G

15

Getting Help on Your Phone

Your Cisco IP Phone provides on-the-spot help with specific buttons and features. Help topics appear on the phone screen. See the table below for details.

If you want to...

Then...
once then immediately press a button or softkey.

Learn about a button or Press i or softkey Learn about a menu item Get help using Help View network statistics for an active call

Press , , or to display a feature menu. Highlight a menu item, then press i or twice quickly. Press i or Press i or twice quickly (without first selecting a menu item). twice quickly during an active call.

Understanding Button Icons

Your phone might have words printed on some buttons instead of icons. However, this Phone Guide uses images of buttons with icons. For a description of button icons used in this book, see the Buttons and Hardware section on page 8, or refer to the Button Definitions section of the Quick Reference tear-out card at the front of this book.

16

OL-4637-03

Basic Call Handling

Basic Call Handling

This section covers basic call-handling tasks such as placing, answering, and transferring calls. The features you use to perform these tasks are standard and available on most phone systems.

Placing a Call
To place a call, pick up the handset and dial. Or use one of the other options outlined in the table below.

If you want to...

Then...

Dial on-hook (no dial Enter a phone number and do one of the following actions to go off-hook: tone) Lift the handset Press Press Dial using the speakerphone or (a line button) before or Press Dial Press New Call and enter a phone number. Or, you can press after dialing, re-dialing or speed dialing a number.

Many of the actions that you can take to dial will automatically trigger speakerphone mode, if the handset is in its cradle and is not lit. These actions include pressing Redial or a speed dial button. Redial the most recently dialed number Speed dial a number Press Redial. By default, Redial uses your primary line. However, you can open a secondary line and then press Redial. To open a line, press . Do one of the following: Press (a speed-dial button) before or after going off-hook. Enter a speed dial index number (1-99 on the keypad) while on-hook and press AbbrDial. For details, see the Setting Up Speed Dial Features section on page 38. Place a call when another call is active (using a new line) Place a call when another call is active (using the same line) Press for the new line. Doing so automatically places the first call on hold.

Press Hold, next press New Call, then dial, re-dial, or speed dial a number. Or, continue to talk on the active call while preparing to dial from a call log or corporate directory. (See the next two rows in this table for details.)

Cisco IP Phone 7960G and 7940G

17

If you want to...

Dial from a call log

Then...
Choose > Missed Calls, Received Calls, or Placed Calls, then scroll to a listing and go off-hook. To add a prefix or other digits, press EditDial. If you want to dial from a call log while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the original call: HoldPuts the first call on hold and dials the second. EndCallDisconnects the first call and dials the second. TransfTransfers the first party to the second. (Press Transf twice.) ConfrnCreates a conference call with all parties. (Press Confrn twice.)

Dial from a corporate Choose > Corporate Directory (name can vary). Use your keypad to directory on the enter letters, then press Search. To dial, scroll to a listing and go off-hook. phone If you want to dial from a directory while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the original call: HoldPuts the first call on hold and dials the second. EndCallDisconnects the first call and dials the second. TransfTransfers the first party to the second. (Press Transf twice.) ConfrnCreates a conference call with all parties. (Press Confrn twice.) Dial from a corporate Use the Cisco WebDialer feature. Open a web browser and go to your directory web page company directory. Click on a phone number in the directory. Click Dial to place the call. Click Hangup to end the call. See the Customizing Your Cisco IP Phone on the Web guide for more details: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm Dial using a headset Do one of the following: If is unlit, press it before or after dialing, re-dialing, or speed-dialing a number. If is lit, press New Call, Redial, or (a line button or speed dial button). Or, enter a phone number and press Dial. Receive notification when a busy or ringing extension becomes available Call the number and press CallBack while listening to the busy tone or ring sound. Hang up. When the extension becomes available, your phone will provide you with an audio and visual alert. (The callback to this number is not automatic; you must place the call.) CallBack is a special feature that your system administrator might configure for your phone. Note that CallBack will fail if the other party has call forwarding enabled. Enter the MLPP access number (provided by your system administrator) followed by the phone number. For more details, see the Prioritizing Critical Calls section on page 33.

Make a priority (precedence) call

18

OL-4637-03

Basic Call Handling

If you want to...

Dial from a Personal Address Book (PAB) entry or Fast Dial code Place a call using a billing or tracking code

Then...
Choose > PAB service or Fast Dial service (exact names might vary). To dial from a listing, scroll to it and go off-hook. For help subscribing to the PAB or Fast Dial service, see the Accessing Your User Options Web Pages section on page 41. Dial a number and enter a client matter code (CMC) or a forced authorization code (FAC) when prompted by a distinctive tone. Your system administrator will tell you if you need to enter CMC or FAC codes and can provide you with detailed instructions.

Place a call using Make sure that you are logged in to Extension Mobility (EM) on the phone your Cisco Extension that you are trying to use. Choose > EM Service (exact name might Mobility profile vary). Then use your keypad to enter login information. If you are using a phone in a shared workspace, you might need to log in to EM before you can access certain features or complete a call. EM is a special feature that your system administrator can assign to phones and phone users. Refer to Customizing Your Cisco IP Phone on the Web: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm Make a video call Check the phone screen display for this icon: If the icon is present, your phone is video-enabled and can support Cisco VT Advantage. This enables you to make video calls using your Cisco IP Phone, your personal computer, and an external video camera. Contact your system administrator for assistance and refer to Cisco VT Advantage Quick Start Guide and Cisco VT Advantage User Guide: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

Tips If you make a mistake while entering a phone number, press << to erase one or more digits. Press Cancel to exit the dialing attempt.
If you are dialing with the phone on-hook, you cannot use * or # as the leading digit. If you need to use these keys, dial with the phone off-hook. If you cannot hear a dial tone or complete a phone call, one or more of the following factors might apply. If necessary, ask your system administration for more information.
You need to log into the Extension Mobility service from the

button on your phone.

You need to enter a client matter code or forced authorization code after dialing a number. Your phone has time-of-day restrictions that prevent you from using some features during

certain hours of the day.

Cisco IP Phone 7960G and 7940G

19

Answering a Call
To answer a call, go-off hook by picking up the handset. Or see the table below for more options.

If you want to...

Answer with a headset

Then...
Press , if unlit. (the line button for the Or, if is already lit, press Answer or incoming call).

Answer with the speakerphone Switch from a connected call to answer a ringing call

Press

, Answer, or

(the line button for the incoming call).

Press Answer or (the line button for the incoming call). Doing so answers the new call and automatically places the first call on hold. See the Using Hold and Resume section on page 21 for more information.

Answer a call using call waiting Ask your system administrator to set up the Call Waiting feature for your phone. When this feature is enabled, you will hear a call waiting tone and see caller ID information if a new call comes in while you are on another call. To answer the call, press Answer. To return to the original call, you must put this call on hold. See the Using Hold and Resume section on page 21. Automatically connect an Ask your system administrator to set up the AutoAnswer feature. incoming call after a ring or two For more information, see the Using AutoAnswer with a Headset or the Speakerphone section on page 35. Retrieve, or allow someone else to retrieve, a held call on another phone (such as a phone in a conference room) Use Call Park. See the Storing and Retrieving Parked Calls section on page 27.

Use your phone to answer a call Use Call Pickup. See the Using a Shared Line section on page 29. that is ringing on another phone Answer a priority call Hang up the current call and press Answer. See the Prioritizing Critical Calls section on page 33.

Send an incoming call directly to Press iDivert. The call is automatically transferred to your voice the voice messaging system message greeting.

20

OL-4637-03

Basic Call Handling

Ending a Call
To end a call, hang up. See the table below for details.

If you want to...

Hang up while using the handset Hang up while using the headset

Then...
Return the handset to its cradle or press EndCall. Press . If you want to keep headset mode activated (keep the button lit after hanging up), press EndCall. or EndCall. Press EndCall. If necessary, remove the call from hold first.

Hang up while using the speakerphone Press Hang up one call but preserve another call on the same line

Using Hold and Resume

Only one call can be active at any given time; all other calls must be placed on hold.

If you...
Want to put a call on hold Want to remove a call from hold on the current line Want to remove a call from hold on a different line

Then...
Make sure the call you want to put on hold is highlighted and press Hold. Scroll to the specific call (if necessary) and press Resume. Press for the line that has the held call. (The line displays the .) If there is a single call holding on this line, the call-on-hold icon call will resume automatically. If there are multiple calls holding on the line, scroll to the specific call (if necessary) and press Resume.

Tip Engaging the Hold feature typically generates music or a beeping tone. For this reason, avoid putting a conference call on hold.

Using Mute
Mute disables the audio input for your handset, headset, speakerphone, and external microphone. With Mute enabled, you can hear other parties on a call but they cannot hear you.

If you want to...

Toggle Mute on Toggle Mute off

Then...
Press Press . .

Cisco IP Phone 7960G and 7940G

21

Transferring a Connected Call

Transfer redirects a connected call. The target is the number to which you want to transfer the call.

If you want to...

Transfer a call without talking to the transfer recipient

Then...
Press Transfer and enter the target number. When you hear the call ringing, hang up. If your system administrator did not enable on-hook transfer, you must press Transfer again to complete the transfer. To cancel the transfer, press EndCall.

Talk to the transfer Press Transfer and enter the target number. Wait for the transfer recipient before transferring recipient to answer. If the recipient accepts the transferred call, press a call (consult transfer) Transfer again. If the recipient refuses the call, press Resume to return to the original call. If your system administrator did not enable on-hook transfer, you must press Transfer again to complete the transfer. To cancel the transfer, press EndCall. Transfer two current calls to each other (direct transfer) Scroll to highlight any call on the line and press Select. Repeat this process for the second call. With one of the selected calls highlighted, press DirTrfr. (You might need to press more to see DirTrfr.) The two calls connect to each other and drop you from the call. If you want to stay on the line with the callers, use Join to create a conference instead. For details, see the Making Conference Calls section on page 24.

Tips When on-hook transfer is enabled, you can either hang up or press Transfer, then hang up.
If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing Transfer cancels the transfer action and places the party to be transferred on hold. You cannot use Transfer to redirect a call on hold. Press Transfer to remove the call from hold before transferring it.

22

OL-4637-03

Basic Call Handling

Forwarding Your Calls to Another Number

You can use Call Forward All to redirect your incoming calls from your Cisco IP Phone to another number. Enter the Call Forward All target number exactly as you would dial it from your desk phone. For example, enter an access code such as 9 or the area code, if necessary.

Note

If you want to...

Then...

Set up call forwarding on your Press CFwdALL and enter a target phone number. primary line Cancel call forwarding on your primary line Verify that call forwarding is enabled on your primary line Set up or cancel call forwarding for any line Press CFwdALL. Look for this icon above the primary line: . Also, check the status line near the bottom of the phone screen; it displays the call forwarding target number. Log in to your User Options web pages, choose your device, then choose Forward all calls... from the main menu. You can set up or cancel call forwarding for each line on your phone. See the Logging In to the User Options Web Pages section on page 41 for login instructions. When call forwarding is enabled for any line other than the primary line, your phone does not provide you with any confirmation that calls are being forwarded. Instead, you must confirm your settings in the User Options pages.

Tips You can forward your calls to a traditional analog phone or to another IP phone (although your system administrator might restrict the call forwarding feature to numbers within your company).
You must configure this feature per line; if a call reaches you on a line where call forwarding is not enabled, the call will ring as usual.

Cisco IP Phone 7960G and 7940G

23

Making Conference Calls

Your Cisco IP Phone allows you to join three or more people into one telephone conversation, creating a conference call.

Types of Supported Conference Calls

There are two types of conference calls: Standard and MeetMe.

Standard Conference Calls In standard (or ad hoc) conference calls, the conference organizer must call participants to add them to the conference. Using your Cisco IP Phone, you can create standard conference calls in different ways, depending on your needs and your phones configuration:
ConfrnUse this softkey to establish a standard conference by calling each participant. Standard conference calling is a default feature available on most phones. JoinUse this softkey to establish a standard conference among several calls already on one line. cBargeUse this softkey to add yourself to an existing call on a shared line and to turn the call into a standard conference call. This is an optional feature available only for shared lines, and your system administrator must configure it for you. See the Using a Shared Line section on page 29 for details. See the Starting and Joining a Standard Conference section on page 25 for additional instructions.

MeetMe Conference Calls MeetMe conferencing allows participants to join a conference by calling the conference number directly, rather than waiting for the conference initiator to call them.
To start a MeetMe conference, use the MeetMe softkey on your phone, then dial the MeetMe phone number provided to you by your system administrator. To participate in a MeetMe conference, dial the MeetMe phone number at a specified time. Conference participants hear a busy tone if they call into the conference before the conference initiator has dialed in. Once the conference initiator has dialed in, the MeetMe conference is established and can continue even if the conference initiator disconnects. Note that MeetMe conferencing is a special feature that your system administrator must configure for you. See the Starting or Joining a MeetMe Conference Call section on page 26 for additional instructions.

24

OL-4637-03

Basic Call Handling

Starting and Joining a Standard Conference

A standard conference allows at least three people to participate in a single call. See the table below for details.

If you want to...

Start a standard conference call by calling participants

Then...
During a connected call, press Confrn to add another party to the call. (You may need to press the more softkey to see Confrn.) Enter the conference participants phone number. After the call connects and you have spoken to the conference participant, press Confrn again to add this party to your call. Repeat to add additional participants. With two or more calls on a single line, scroll to highlight any call on the line and press Select. Repeat this process for each call you want to add to the conference. From one of the selected calls, press Join. (You may need to press the more softkey to see Join.) Note that the active call is selected and added to the conference automatically. Answer the phone when it rings. You do not need to do anything special to participate in a standard conference call. Highlight a remote-in-use call on a shared line and press cBarge. (You may need to press the more softkey to display cBarge.) Other parties on the call will hear a barge tone. See the Using a Shared Line section on page 29 for details. Highlight an active conference, and press ConfList. Participants are listed in the order in which they join the conference with the most recent additions at the top. While viewing the conference list, press Update. While viewing the conference list, locate the person listed at the bottom of the list with an asterisk (*) next to the name. Highlight the participants name at the top of the conference list and press Remove. (The last participant is always listed at the top of the list.) Or, when not viewing the conference list, press RmLstC. You can remove participants only if you initiated the conference call.

Invite current callers to join a standard conference

Participate in a standard conference Barge (add yourself to) a call on a shared line and turn the call into a standard conference call View a list of conference participants Get an updated list of conference participants See who started the conference Drop the last party added to the conference

Cisco IP Phone 7960G and 7940G

25

If you want to...

Remove any conference participant End your participation in a standard conference

Then...
Highlight the participants name and press Remove. You can remove participants only if you initiated the conference call. Hang up or press EndCall. If you did not initiate the conference call, hanging up will not disrupt the connection for the remaining parties. If you initiated the conference call, hanging up might end the conference (depending on how your system administrator configured your phone). To avoid this, you can transfer the conference to another caller before hanging up. That caller then acts as the virtual controller for the conference. A virtual controller cannot add or remove parties; however, the conference continues with the established participants.

Tips Calls must be on the same line before you can add them to a standard conference call. If calls are on different lines, transfer them to a single line before using Confrn or Join.
If you get an error stating, No Participant Info when attempting to use Join, be sure that you have selected at least one call in addition to the active call, which is selected automatically. Depending on how your phone is configured, if you leave a conference after creating it, the conference might end. See the last row of the above table for more information.

Starting or Joining a MeetMe Conference Call

MeetMe conferencing allows participants to join a conference by calling the conference number directly, rather than waiting for the conference initiator to call them. See the table below for details.

If you want to...

Establish a MeetMe conference

Then...
Press NewCall or lift the receiver to go off-hook. Then press MeetMe and dial the MeetMe conference number. (See your administrator for a list of valid numbers.) Remember to inform participants about the conference number, so that they can dial in. However, participants will hear a busy tone if they call the conference number before you have dialed in.

Participate in a MeetMe conference End a MeetMe conference

Dial the MeetMe conference number (provided by the conference initiator). You will be connected to the conference only after the conference initiator has dialed in. Hang up or press EndCall.

26

OL-4637-03

Advanced Call Handling

Advanced Call Handling

Advanced call-handling tasks involve special (non-standard) features that your system administrator might configure for your phone depending on your call-handling needs and work environment. You will not have access to these features unless your system administrator enables them for you.

Storing and Retrieving Parked Calls

You can park a call when you want to store the call so that you or someone else can retrieve it from another phone in the Cisco CallManager system (for example, a phone at a co-workers desk or in a conference room). Call Park is a feature that your system administrator must enable for you.

If you want to...

Store an active call using Call Park Retrieve a parked call

Then...
During a call, press Park. (You may need to press the more softkey to see Park.) This prompts your phone to store the call. Note the call park number displayed on your phone screen and hang up. Enter the call park number from any Cisco IP Phone in your network to connect to the call. You have a limited amount of time to retrieve the parked call before it reverts to ringing at its original destination. See your system administrator for this time limit.

Picking Up Redirected Calls on Your Phone

Your system administrator might enable Call PickUp for your phone if you share call-handling responsibilities with co-workers. Call PickUp allows you to answer a call that is ringing on a co-workers phone by redirecting the call to your phone. You can use Call PickUp features to handle calls for co-workers who are in your call pickup group (PickUp), who are in another pickup group (GPickUp), or who are in a group associated with your group (OPickUp).

Cisco IP Phone 7960G and 7940G

27

If you want to...

Answer a call that is ringing on another extension within your call pickup group

Then...
Press PickUp to connect to the call. (You might have to go off-hook to press PickUp.) If your system administrator did not enable auto-pickup, the call will ring on your phone when you press PickUp. In this case, press Answer to connect to the call. Press GPickUp. (You might have to go off-hook to press GPickUp.) Enter the group pickup code provided by your system administrator to connect to the call. If your system administrator did not enable auto-pickup, the call will ring on your phone when you press GPickUp and enter the group pickup code. In this case, press Answer to connect to the call.

Answer a call that is ringing on another extension outside of your group

Answer a call that is ringing on another extension in your group or in an associated group

Press OPickUp to connect to the call. (You might have to go off-hook to press OPickUp.) If your system administrator did not enable auto-pickup, the call will ring on your phone when you press OPickUp. In this case, press Answer to connect to the call.

Tips When you press PickUp and GPickUp, you connect to the call that has been ringing for the longest time.
With OPickUp, your system administrator can associate multiple call pickup groups with your group and assign a priority to the groups. When you press OPickUp, you connect to the ringing call in the pickup group with the highest priority. If you want to pick up the call on an extension other than your primary line, first press available line button) and then press a Call PickUp softkey. (an

28

OL-4637-03

Advanced Call Handling

Using a Shared Line

Your system administrator might assign a shared phone line to you. Typically, a shared line has two main uses: One person uses multiple phonesFor example, your shared line is assigned to both your desk phone and a lab phone. An incoming call to the shared line rings on both phones and you can use either phone to answer the call. Multiple people share a lineFor example, you are one of many people who can handle incoming calls on the shared line, or you are a manager who shares an extension number with your assistant.

Understanding Shared Lines

Remote-in-Use If you have a shared line, you might see the remote-in-use icon on your phone screen: . This icon indicates that a co-worker is currently using the shared line. You can place and receive calls as usual on a shared line, even when the remote-in-use icon appears. Sharing Call Information and Barging Unless a co-worker who shares your line has the Privacy feature enabled, you can see information on your phone screen about calls that your co-worker places and receives on the shared line. This information might include caller ID and call duration. Conversely, when you are using a shared line, information about your call is displayed on the co-workers phone screen.
When call information is visible in this way, you and co-workers can add yourselves to calls on the shared line using either the Barge or cBarge feature. Adding yourself to a call on a shared line is called barging. For more information about barging, see the Adding Yourself to a Shared-Line Call section on page 30.

Privacy If you do not want co-workers who share your line to see information about your calls, enable the Privacy feature. Doing so also prevents co-workers from barging your calls. See the Preventing Others from Viewing or Barging a Shared-Line Call section on page 31. Maximum Supported Calls on a Shared Line The maximum number of calls that a shared line supports can vary by phone. Thus, at times you might not be able to make a new call on the shared line even if your co-worker can. For example, your phone supports a maximum of four calls on a shared line and your co-workers phone supports five calls on the same line. If there are four calls on the line, the NewCall softkey is unavailable to you but available to your co-worker.

Cisco IP Phone 7960G and 7940G

29

Adding Yourself to a Shared-Line Call

If you share a phone line, your system administrator might provide you with Barge or cBarge. You can use either feature to add yourself to an active call on your shared line. Typically, only one of these features will be configured for you.

If you want to...

See if a co-worker has an active call on the shared line

Then...
Look at the shared line number. When the line is in use from another phone, the remote-in-use icon appears: . If your co-worker has Privacy enabled, the Barge and cBarge softkeys are not available and you cannot barge the call. In this case, you cannot view information for the private call on your phone screen; however, you can still use the shared line to place and receive new calls. Press for the shared line in use. All non-private calls appear on the call activity area. Highlight a remote-in-use call on your phone screen and press Barge. (You may need to press the more softkey to display Barge.) Other parties hear a beep tone announcing your presence. When you hang up, the remaining parties hear a disconnect tone and the original call continues.

View current calls on the shared line Add yourself to a call on a shared line using the Barge softkey

Add yourself to a call on a shared line using the cBarge softkey

Highlight a remote-in-use call on your phone screen and press cBarge. (You may need to press the more softkey to display cBarge.) Other parties hear a tone and brief audio interruption, and call information changes on the phone screen. Note that, unlike Barge, cBarge converts the call into a standard conference call, allowing you to add new conference participants to the call. (To learn more about conference features that you can use with cBarge, see the Making Conference Calls section on page 24.) When you hang up, the call remains a conference call (provided at least three participants remain on the line).

Tips Barge and cBarge softkeys are not available for private calls.
You cannot barge an encrypted call if the phone you are using is not configured for encryption. When your barge attempt fails for this reason, your phone plays a fast busy tone. See the Making and Receiving Secure Calls section on page 32. You will be disconnected from a call that you have joined using Barge if the call is put on hold, transferred, or turned into a conference call.

30

OL-4637-03

Advanced Call Handling

Preventing Others from Viewing or Barging a Shared-Line Call

If you share a phone line, you can use the Privacy feature to prevent others who share the line from viewing your calls or barging your calls (adding themselves to calls on the shared line using the Barge or cBarge feature).

If you want to...

Prevent others from viewing or barging any calls on a shared line Allow others to view or barge any calls on a shared line

Then...
Enable Privacy by pressing Private. When Privacy is on, this icon appears next to the Privacy feature button: Disable Privacy by pressing Private. When Privacy is off, this icon appears next to the Privacy feature button:

Tips If a phone that shares your line has Privacy enabled, you can make and receive calls using the shared line as usual. However, you cannot add yourself to existing calls on the shared line, and the barge softkeys will not be available to you.
The Privacy feature applies to all shared lines on your phone. Consequently, if you have multiple shared lines on your phone and Privacy is enabled, coworkers will not be able to view or barge calls on any of your shared lines.

Tracing Suspicious Calls

If you are receiving suspicious or malicious calls, your system administrator can add the Malicious Call Identification (MCID) feature to your phone. This feature enables you to identify an active call as suspicious, which initiates a series of automated tracking and notification messages.

If you want to...

Identify a suspicious call

Then...
Press MCID. You will hear a special tone and see the message, MCID successful on your phone. The call remains active until you end the call.

Cisco IP Phone 7960G and 7940G

31

Making and Receiving Secure Calls

Depending on how your system administrator has configured your phone system, your phone might support making and receiving secure calls. Your phone is capable of supporting these types of calls: Authenticated callThe identities of all phones participating in the call have been verified. Encrypted callThe phone is receiving and transmitting encrypted audio (your conversation) within the Cisco IP network. Encrypted calls are also authenticated. Non-secure callAt least one of the participating phones or the connection does not support these security features, or the phones cannot be verified.

If you want to...

Then...

Check the security level of a call Look for one of these security icons to the right of the call duration timer for a connected call: Authenticated call Encrypted call Neither security icon appears if the call is non-secure. Determine if secure calls can be made in your company Contact your system administrator.

Note

There are interactions, restrictions, and limitations that affect how security features work on your phone. For more information, ask your system administrator.

32

OL-4637-03

Advanced Call Handling

Prioritizing Critical Calls

In some specialized environments, such as military or government offices, you might need to make and receive urgent or critical calls. These critical calls might require higher priority handling, such as being able to bypass other calls. If you have the need for this specialized call handling, your system administrator can add Multilevel Precedence and Preemption (MLPP) to your phone. Keep these terms in mind: Precedence indicates the priority associated with a call. Preemption is the process of ending an existing, lower priority call while accepting a higher priority call that is sent to your phone.

If you...

Then...

Want to choose a priority (precedence) Contact your system administrator for a list of level for an outgoing call corresponding precedence numbers for calls. Want to make a priority (precedence) call Hear a special ring (faster than usual) or a special call waiting tone Enter the MLPP access number (provided by your system administrator) followed by the phone number. You are receiving a priority (precedence) call. An MLPP icon on your phone screen indicates the priority level of the call. Low priority (priority) call Medium priority (immediate) call High priority (flash) call Highest priority (flash override) or Executive Override call Higher priority calls are displayed at the top of your call list. If you do not see an MLPP icon, the priority level of the call is normal (routine). Want to accept a higher-priority call Hear a continuous tone interrupting your call Answer the call as usual. If necessary, end an active call first. You or the other party are receiving a call that must preempt the current call. Hang up immediately to allow the higher priority call to ring through.

Want to view the priority level of a call Look for an MLPP icon on your phone screen:

Tips When you make or receive an MLPP-enabled call, you will hear special ring tones and call waiting tones that differ from the standard tones.
If you enter an invalid MLPP access number, a verbal announcement will alert you of the error.

Cisco IP Phone 7960G and 7940G

33

Using a Handset, Headset, and Speakerphone

The table below describes how to use these devices.

If you want to...

Use the handset Use a headset

Then...
Lift it to go off-hook; replace it to go on-hook. Press to toggle headset mode on and off. (AutoAnswer users should see the Using AutoAnswer with a Headset or the Speakerphone section on page 35 for exceptions.) You can use the headset in conjunction with all of the controls on your phone, including and . See the Obtaining a Headset section on page 34 for headset purchasing information.

Use the speakerphone

Press

to toggle speakerphone mode on or off.

Many of the actions you can take to dial a number or answer a call will automatically trigger speakerphone mode, assuming that the handset is in its cradle and is not lit. Switch to the speakerphone or headset (from the handset) during a call Switch to the handset (from the speakerphone or headset) during a call Press or , then hang up the handset.

Lift the handset. There is no need to push any buttons.

Tips See the Connecting Your Phone section on page 5 to locate the headset port.
See the Basic Call Handling section on page 17 for detailed instructions about how to use the handset, headset, and speakerphone to place, answer, end, and otherwise handle calls.

Obtaining a Headset
Your phone supports four- or six-wire headset jacks. For information about purchasing headsets, see the Headset Information section on page 6 and go to the following URL: http://vxicorp.com/cisco

34

OL-4637-03

Using a Handset, Headset, and Speakerphone

Using AutoAnswer with a Headset or the Speakerphone

You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of others. Your system administrator configures AutoAnswer to work with either your speakerphone or headset. See the table below for details.

If you...
Use AutoAnswer with a headset

Then...
Keep headset mode active (in other words, keep illuminated) even when you are not on a call. To keep headset mode active, press EndCall to hang up (rather than pressing to end the call), then press NewCall or Dial when placing new calls. If your phone is set up to use AutoAnswer in headset mode, calls will be answered automatically only if is lit. Otherwise, calls will ring normally and you will need to manually answer them.

Use AutoAnswer with the Keep the handset in the cradle and headset mode inactive (in other speakerphone words, keep unlit). If your phone is set up to use AutoAnswer in speakerphone mode, calls will be answered automatically using the speakerphone only if the above criteria are met. Otherwise, calls will ring normally and you will need to manually answer them.

Cisco IP Phone 7960G and 7940G

35

Customizing Phone Settings

You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below. Keep these tips in mind: Most settings are accessible on your phone, but a few are accessed online from your User Options web pages. See the Logging In to the User Options Web Pages section on page 41 for more information. If you want to revert to setting values that were originally coded into the phone at the factory, choose > Default. (You may need to press the more softkey to see Default.) Volume levels and values in the Contrast and Ring Type menus will be affected. If is not responsive, your system administrator might have disabled this button on your phone. Ask your system administrator for more information.

Adjusting the Volume

The table below describes how to adjust and save volume levels on your phone.

If you want to...

Adjust the volume level for a call

Then...
Press during a call or after invoking a dial tone. You can press Save to save this volume setting for future calls. Note that volume settings for the handset, speakerphone, and headset must be adjusted separately.

Adjust the volume level for the ringer

Press while the handset is in the cradle and the headset and speakerphone buttons are off. Continue pressing the button to increase or decrease the volume. The new ringer volume is saved automatically.

36

OL-4637-03

Customizing Phone Settings

Customizing Rings and Message Indicators

You can customize the way that your phone indicates an incoming call or a new voice mail message for each of your lines. Customized ring sounds and other indicators can help you quickly differentiate between multiple lines. For example, you can choose a chirping sound to indicate an incoming call on Line 1 and a drumbeat to indicate an incoming call on Line 2.

If you want to...

Change the ring sound

Then...
Choose > Ring Type. Select a phone line or the default ring setting. Use the Navigation button to scroll through the ring types. Press Play to hear the selected ring type. When you find a ring sound that you want, press Select, then press OK. You can apply the default ring setting to a selected phone line by pressing Default.

Change the ring pattern (flash-only, ring once, beep-only, etc.) Change the way that the voice message light on your handset works

Log in to your User Options web pages, select your device, then choose Change the Ring Settings for your phone from the main menu. Log in to your User Options web pages, select your device, then choose Change the Message Waiting Lamp policy... from the main menu. Typically, the default system policy tells your phone to always light when you receive a new voice message.

Customizing the Phone Screen

You can adjust the contrast and the language for your phone screen.

If you want to...

Change the phone screen contrast

Then...
Choose > Contrast. Press Up, Down or , then press OK. Or press Cancel to revert to the previously saved setting.

Change the language on Log in to your User Options web pages, select your device, then choose your phone screen Change the Locale... from the main menu. See the Logging In to the User Options Web Pages section on page 41 for more information.

Cisco IP Phone 7960G and 7940G

37

Setting Up Speed Dial Features

Speed dial features allow you to press a button or enter an index code to place a call. You can set up speed dialing for your phone in two ways: Speed dialing with a buttonYou can assign a speed dial number to any available programmable button on your phone that has not already been configured as a line, feature, or service button. Speed dialing with an index codeUsing the Abbreviated Dialing feature, you can enter an assigned index number (1 to 99) rather than dialing the entire phone number. Set up both types of speed dial features from your User Options web pages, as described in the table below. (See the Logging In to the User Options Web Pages section on page 41 for more information about your User Options pages.)

If you want to...

Add speed dial numbers to phone buttons

Then...
Log in to your User Options web pages, select your device, then choose Add/Update Speed Dials from the main menu. In the Speed Dial Settings on Phone section, enter a phone number and label for each available speed dial button. Enter the number exactly as you would dial it from your desk phone. For example, enter an access code such as 9 or the area code, if necessary. The label you enter appears next to the speed dial button on your phone screen. Log in to your User Options web pages, select your device, then choose Add/Update Speed Dials from the main menu. In the Speed Dial Settings not associated with a phone button section, enter a phone number and label for each available speed dial button. Enter the number exactly as you would dial it from your desk phone. For example, enter an access code such as 9 or the area code, if necessary. Delete the phone number and label from either of the speed dial web pages.

Add speed dial numbers to use with Abbreviated Dialing

Remove a speed dial number

Tips For details on making calls using either speed dial feature, see the Placing a Call section on page 17.
Your system administrator can assign speed dial buttons to your phone and restrict the number of speed dial buttons that you can configure.

38

OL-4637-03

Using Voice Messaging, Call Logs, and Directories

Using Voice Messaging, Call Logs, and Directories

This section describes how you can use feature buttons to access voice messages, call logs, and directories.

Accessing Voice Messages

Your company determines the voice message service that your phone system uses. For the most accurate and detailed information about this service, refer to the documentation that came with it. For a general overview of voice message service features, refer to the table below.

If you want to...

Then...

Set up and Press and follow the voice instructions. If a pop-up messages menu personalize your appears on your phone screen, choose an appropriate menu item. voice message service See if you have a new voice message Look at your phone for the following indicators: A steady red light on your handset. (This indicator can vary. See the Customizing Rings and Message Indicators section on page 37.) A flashing envelope icon Listen to your voice messages or access the voice messages menu and text message on your phone screen. Press . Depending on your service, doing so either auto-dials your voice message service or provides a pop-up menu on your phone screen.

Send a call to your Press iDivert. The iDivert feature automatically transfers a call (including a voice message system ringing or held call) to your voice message system. Callers will hear your voice message greeting and can leave you a message.

Cisco IP Phone 7960G and 7940G

39

Using Call Logs and Directories

Your phone maintains logs of your missed, placed, and received calls. You can use the Directories button to view and dial from call logs. You can also access a corporate directory (if applicable).

If you want to...

View your call logs Dial from a call log

Then...
Choose > Missed Calls, Placed Calls, or Received Calls. A maximum of 32 records is stored in each of these logs. Choose a listing and go off-hook. If you need to edit the number displayed in the log, press EditDial followed by << or >> to move the cursor or erase digits. Use the keypad to enter digits. If you want to dial from a call log while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the original call: HoldPuts the first call on hold and dials the second. EndCallDisconnects the first call and dials the second. TransfTransfers the first party to the second. (Press Transf twice.) ConfrnCreates a conference call with all parties. (Press Confrn twice).

Erase your call logs

Press , then press Clear. Doing so erases your Missed, Placed, and Received call logs.

Dial from a corporate Choose > Corporate Directory (exact name can vary). Search for a directory listing by entering letters with your keypad. (You can search using a partial name.) To dial from a listing, scroll to it and go off-hook. If you want to dial from a directory while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the original call: HoldPuts the first call on hold and dials the second. EndCallDisconnects the first call and dials the second. TransfTransfers the first party to the second. (Press Transf twice.) ConfrnCreates a conference call with all parties. (Press Confrn twice).

Note

If the network shuts down or is reset, you might lose information in your call logs.

40

OL-4637-03

Accessing Your User Options Web Pages

Accessing Your User Options Web Pages

Because your Cisco IP Phone is a network device, it can share information with other network devices in your company, including your computer and web-based services accessible using a web browser on your computer. You can establish phone services, and control settings and features from your computer using the Cisco CallManager User Options web pages. Once you configure features and services on the web pages, you can access them on your phone. For example, you can set up speed dial buttons from your web pages, then access them on your phone. This section describes how to access your User Option web pages and how to subscribe to phone services. For more details about the features you can configure and the phone services to which you can subscribe, refer to Customizing Your Cisco IP Phone on the Web at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

Logging In to the User Options Web Pages

Procedure
Step 1 Step 2 Step 3 Obtain a User Options URL, user ID, and default password from your system administrator. Open a web browser on your computer and enter the URL (provided by your system administrator) and log on. From the general menu, select your device type (phone model) in the Select a device drop-down list. After you make your selection, a context-sensitive menu appears with options appropriate for your device type.

Tips for Navigating the User Options Pages Select your device from the menu page to see all of your options.
Click Update to apply and save your changes. Click Return to the Menu to get back to the context-sensitive menu. Click Log Off to exit the User pages.

Cisco IP Phone 7960G and 7940G

41

Subscribing to Phone Services

Before you can access subscription phone services on your phone, you need to subscribe to them by using your computer to access the User Options web pages. (See the Logging In to the User Options Web Pages section on page 41 for help logging in.) Phone services can include: Web-based information, such as stock quotes, movie listings, and weather reports Network data, such as corporate calendars and searchable directories Phone features, such as My Fast Dials and a Personal Address Book Refer to the table below for more information.

If you want to...

Subscribe to a service

Then do this after you log in and select your device type...
From the main menu, choose Configure your Cisco IP Phone Services. Select a service from the Available Services drop-down list and click Continue. Enter more information upon request (such as a zip code or PIN), then click Subscribe. From the main menu, choose Configure your Cisco IP Phone Services. Click a service in the Your Subscribed Services panel. Click Update after making changes, or click Unsubscribe. After subscribing to a service, choose Add/Update your Service URL Buttons from the main menu. For each available button, select a service from the drop-down list and enter a text description. Click Update after making changes. Your system administrator determines how many programmable buttons are available for services and might assign service buttons to your phone. Press on your phone. Or, if you have added a service to a programmable button, press (the programmable button) that corresponds to the service. Refer to Customizing Your Cisco IP Phone on the Web: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/ index.htm

Change or end subscriptions Add a service to a programmable button

Access a service on your phone Learn how to use phone services

42

OL-4637-03

Understanding Additional Configuration Options

Understanding Additional Configuration Options

Your system administrator can configure your phone to use specific button and softkey templates along with special services and features, if appropriate. The table below provides an overview of some configuration options that you might want to discuss with your phone system administrator based on your calling needs or work environment. You can locate User Guides and other documents listed in this table from the following URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm

Note

If you...
Need to handle more calls on your phone line Need more than one phone line Need more speed dial buttons

Then...
Ask your system administrator to configure your line to support more calls.

For more information...

Talk to your system administrator or phone support team.

Ask your system administrator to Talk to your system administrator configure one or more additional directory or phone support team. numbers for you. First make sure that you are using all of your currently available speed dial buttons. If you need additional speed dial buttons, try using Abbreviated Dialing or subscribing to the Fast Dial service. Ask your system administrator about the option of attaching a Cisco IP Phone 7914 Expansion Module to your phone. See the: Setting Up Speed Dial Features section on page 38 Subscribing to Phone Services section on page 42 Cisco IP Phone 7914 Expansion Module Phone Guide See the: Cisco IP Manager Assistant User Guide Using a Shared Line section on page 29 See the Using a Shared Line section on page 29.

Work with (or work as) an administrative assistant

Consider using: The Cisco IP Manager Assistant service a shared line Request a shared line. This allows you to use one extension number for your desk phone and lab phone, for example.

Want to use one extension for several phones

Cisco IP Phone 7960G and 7940G

43

If you...
Share phones or office space with co-workers

Then...
Consider using: Call Park to store and retrieve calls without using the transfer feature Call Pickup to answer calls ringing on another phone using your own phone a shared line to view and add yourself to calls in progress Cisco Extension Mobility to apply your phone number and user profile to a shared phone

For more information...

Ask your system administrator about these features and see the: Advanced Call Handling section on page 27 Using a Shared Line section on page 29 Using the Extension Mobility Service section in the document called Customizing Your Cisco IP Phone on the Web See the Using AutoAnswer with a Headset or the Speakerphone section on page 35. Contact your system administrator for assistance and see the Cisco VT Advantage User Guide and Cisco VT Advantage Quick Start Guide. See the Using the Extension Mobility Service section in Customizing Your Cisco IP Phone on the Web.

Answer calls frequently or handle calls on someones behalf Need to make video calls

Ask your system administrator to set up the AutoAnswer feature for your phone.

Consider using Cisco VT Advantage, which enables you to make video calls using your Cisco IP Phone, your personal computer, and an external video camera.

Want to Ask your system administrator about the temporarily apply Cisco Extension Mobility service. your phone number and settings to a shared Cisco IP Phone

44

OL-4637-03

Troubleshooting Your Phone

Troubleshooting Your Phone

This section tells you how to access information about your Cisco IP Phone and phone calls to help your system administrator or technician diagnose problems with your phone.

If you are asked to...

Access network configuration data Access status data Access phone model information

Then...
Choose > Network Configuration and select the network configuration item that you want to view. Choose Choose > Status and select the status item that you want to view. > Model Information.

Note

If is not responsive, your system administrator might have disabled this button on your phone. Ask your system administrator for more information.

Using the Quality Reporting Tool

Your system administrator may temporarily configure your Cisco IP Phone with the Quality Reporting Tool to help troubleshoot performance problems. You can use the QRT softkey to submit information about problem phone calls to your system administrator. Depending on how your system administrator configured the Quality Reporting Tool for your phone, you can use the QRT softkey in one of two ways:

If you want to...

Quickly report an audio problem for a current call Report a problem with your phone calls

Then...
While on the call, press QRT. (You might need to press more first.) Your phone system will collect and log audio data for the current call and route this information to your system administrator. Press QRT. (You might need to press more first.) Select the problem you want to report from the list of problem categories. Some problem categories include a reason code that you can select to provide more details about the problem. Your phone will route this information to your system administrator.

Cisco IP Phone 7960G and 7940G

45

Cisco One-Year Limited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranty applicable to Cisco software, is included on the Cisco Documentation CD and on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty document from the CD or Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears. 2. To read the Cisco Information Packet, follow these steps: a. Click the Information Packet Number field, and make sure that the part number 78-5235-02F0 is highlighted. b. Select the language in which you would like to read the document. c. Click Go. d. The Cisco Limited Warranty and Software License page from the Information Packet appears. e. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobes website: http://www.adobe.com

Note

3. To read translated and localized warranty information about your product, follow these steps: a. Enter this part number in the Warranty Document Number field: 78-10747-01C0 b. Select the language in which you would like to view the document. c. Click Go. The Cisco warranty page appears. d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). You can also contact the Cisco service and support website for assistance: http://www.cisco.com/public/Support_root.shtml.

46

OL-4637-03

Cisco One-Year Limited Hardware Warranty Terms

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.
Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number

Cisco IP Phone 7960G and 7940G

47

48

OL-4637-03

Index
A
answering calls, options for 20 audio problems, reporting 45 authenticated calls, icon for 32 AutoAnswer, using 35 call-handling, basic 17 calls answering 20 compared to lines 12 conference features for 24 ending 21 forwarding 23 handling multiple 14 holding and resuming 21 barge and privacy 31 and shared lines 29 using 30 buttons, identifying 16 icons for 13 maximum per line 12, 29 multiple parties on 24 muting 21 parking 27 placing 17 prioritizing 33 redirecting while ringing 20, 27 call activity area, viewing 11 call forwarding, using 23 call logs dialing from 18 erasing 40 viewing and dialing from 40 call park, using 27 call pickup, using 27 call waiting, using 20 CallBack, using 18 call-handling, advanced 27 reporting problems with 45 secure 32 selecting 13 storing and retrieving 27 transferring 22 viewing 11, 14 cBarge, See barge Cisco IP Phone adjusting height of 6 connecting 5

Cisco IP Phone 7960G and 7940G

49

description of 8 documentation for 4 feature configuration for 12, 43 illustration of 9 online help for 16 registering 6 securing handset rest 6 web-based services for 41 conference calls MeetMe 24, 26 standard 24, 25 types of 24 corporate directory dialing from web page with 18 using on phone 18

F
Fast Dial service dialing with 19 subscribing to 42 feature buttons directories 10 help 10 messages 10 services 10 settings 10 feature menus, using 15 features, availability of 12 footstand adjusting 6 button, identifying 10 forwarding calls, options for 23

D
dialing, options for 17 directories button, description of 10 directory dialing from web page with 18 using on phone 18, 40 documentation, accessing 4

G
group call pickup, using 27

H
handset light strip 9 securing in cradle 6 using 34 volume 36 hanging up, options for 21 headset answering calls with 20 button, identifying 10 hanging up with 21

E
encrypted calls, icon for 32 ending a call, options for 21 extension numbers, viewing 11

50

OL-4637-03

mode, using 34 placing calls with 18 volume 36 headset performance, general 6 help button, description of 10 help, using 16 hold and switching calls 14 and transferring 22 using 21

M
Malicious Call Identification (MCID), using 31 MeetMe conferences 24, 26 menus, using 15 messages indicator for 37, 39 listening to 39 messages button, description of 10 missed calls, records of 40 MLPP, using 33 multiple calls, handling 14 mute button, description of 10 mute, using 21

I
icons for call states 13 on buttons 16 installing, Cisco IP Phone 5

N
navigation button, description of 10 network configuration data, locating 45 new calls, options for placing 17

K
keypad description of 10 entering text with 15

O
off-hook description of 12 dialing 17 on-hook description of 12 dialing 17 online help, using 16

L
line buttons, identifying 10 lines description of 12 viewing 11

Cisco IP Phone 7960G and 7940G

51

P
Personal Address Book (PAB) dialing from 19 subscribing to 42 phone lines buttons for 10 description of 12 viewing 11 phone screen adjusting contrast of 37 changing language of 37 choosing items 15 cleaning 4 features of 11 placed calls, records of 40 placing calls, options for 17 prioritizing calls 33 privacy and shared lines 29 using 31 programmable buttons description of 10 labels for 11

resume, using 21 ringer customizing 37 indicator for 9 volume 36

S
safety, warnings 2 secure calls, description of 32 selecting calls 13 services button, description of 10 services, subscribing to 42 settings customizing 36 using default 36 settings button, description of 10 shared lines and remote-in-use icon 29 description of 29 maximum calls on 29 with barge 30 with privacy 31 softkey buttons description of 10 labels for 11 speakerphone answering calls with 20 button, identifying 10 hanging up with 21 mode, using 34 placing calls with 17 volume 36

Q
QRT, using 45

R
received calls, records of 40 redial, using 17 remote-in-use icon for shared lines 29

52

OL-4637-03

speed dial buttons, configuring 38 buttons, identifying 10 labels 11 using 17 status data, locating 45 status line, viewing 11 suspicious calls, tracing 31 switching calls 14

W
warnings, safety 2 WebDialer, using 18

T
TAPS, using 6 text, entering on phone 15 Tool for Auto-Registered Phones Support 6 transferring, options for 22 troubleshooting, data for 45

U
User Options web pages accessing 41 and phone services 42

V
voice message indicator, identifying 39 voice message service, using 39 volume adjusting 36 using default 36 volume button, description of 10

Cisco IP Phone 7960G and 7940G

53

54

OL-4637-03

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100

European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.cisco.com Tel: 31 0 20 357 1000 Fax: 31 0 20 357 1100

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-7660 Fax: 408 527-0883

Asia Pacific Headquarters Cisco Systems, Inc. 168 Robinson Road #28-01 Capital Tower Singapore 068912 www.cisco.com Tel: +65 6317 7777 Fax: +65 6317 7799

Cisco Systems has more than 200 offices in the following countries. Addresses, phone numbers, and fax numbers are listed on the

Cisco Web site at www.cisco.com/go/offices

Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Thailand Turkey Ukraine United Kingdom United States Venezuela Vietnam Zimbabwe

Copyright 2005 Cisco Systems, Inc. All rights reserved. CCSP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, PostRouting, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0501R)

OL-4637-03