Scribd
Upload
89 views

Method Statement For Programming of Fire Alarm System For Interfacing Module

Uploaded by

Shaik's Peer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
89 views

Method Statement For Programming of Fire Alarm System For Interfacing Module

Uploaded by

Shaik's Peer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
Loco PROGRAMMING OF FIRE ALARM SYSTEM FOR INTERFACING MODULE OF AHU UNIT AND NEED TO CHECK AND Date: TROUBLESHOOT EXACT FAULT OF ANNOUNCIATOR METHOD STATEMENT Mss: 00 1 Purpose ‘This Method Statement document explains the method for Reprogramming of fie alarm system (FAS) for interfacing ‘module of AHU Unit and needs to check the exact fault of Annunciator-2 at (Project/Facilty Name) and Annunciator. 2 Scope ‘The scope of works detailed within this MS document applies to method for Reprogramming for afire alarm system (FAS) for Interfacing module of AHU and require to examine the exact defects of Annunciator-2 whereby upon satisfactory accomplishment, inspection of works, the below mentioned Project requirement and effective & efficient system is handed Over to the Client. 4 Reference "NFPA 101Life Safety Code = NFPA72 Fire alarm system "NFPA 70 (2014 Edition)- Electrical Procedure & ‘etvity Responsible Person Controling Document Preventive maintenance: ‘Authorized PTW SHALL be Issued by the client before the start of works ‘Worksite Engineer Personnel conducting works SHALL wear appropriate PPE ‘Safety warring signs SHALL be provided and the area cleared of nom ‘essential personnel > ‘The programmer will connect the software with the fire alarm panel in MODE-1. ‘Worksite Engineer ‘The Programmer already added the exiting interfacing module as per the fire alarm panel Node and they will provide cause and effect (Ouring fre ‘alarm activation AHU module will be actvated after 180 seconds time latency) for the Existing Module (EM) The programmer wil do the changing of caution and effect as per the site standard to activate the Existing module. Worksite Engineer “After completing programming, and updating the fire system, We require ‘to do the Fire Alarm Testing (FAT) to check the cause and effect of the siting module. “The programmer will connect the software with fire alarm master panel In (specified Room) and he will check and troubleshoot exact fault of annunciator-2 Trouble Signatures Tssued for Anproval Reviewed bye ‘Approved by: 'Mos/Programming of Fire Alarm System for Interfacing Module

You might also like