Issued Dec. 2017 • Index No. DCM/12.

0 UK

MigMatic 380/380DX ® MIG Welding

Power Source

Industrial Applications Processes Input Power 400 V, 3-phase, 50/60 Hz

Quick Construction MIG/MAG (GMAW)
Rated Output 350 A at 29 VDC, 35% duty cycle
Specs Trailer fabrication
Excavator bucket repair
Flux-cored (FCAW)
Wire Feed Speed 1.3–26 mpm (51–1,024 ipm)
Rental fleets
General fabrication Net Weight 102.6 kg (227 lb.)

Industrial MIG systems include:

Heavy-duty power source
3 m (10 ft.) heavy-duty work cable with
clamp
Four 1.0/1.2 mm (.040/.045 in.)
dual-groove quick-change drive rolls
Heavy-duty running gear/bottle rack
Weld Ready packages add:
4.6 m (15 ft.) Bernard™ Q3015TE3EEQ
MIG gun and cable assembly
3 m (10 ft.) gas hose
Two 1.2 mm (.045 in.) contact tips

MigMatic 380
MigMatic 380 DX Weld Ready package

Manual mode allows simple adjustment Superior arc control technology provides Adjustable
of parameters for welding on a broad range the operator with state-of-the-art welding run-in and
of applications. performance on a wide variety of materials. burnback
controls
Thermal overload protection shuts down the Traditional tapped design (30 steps) and allow the
power source output if the main transformer laminated inductor provide a stable, smooth operator to set the optimum arc starts and
or rectifier overheats. arc for consistent weld quality. stops, reducing wire stubbing, arc flaring or
Industrial, four-roll Ergonomic, easy-to-operate controls wire burning back.
gear-driven system simplify setup without minimizing features Spot weld timer provides consistent spot
features no-tool, or welding performance. welds every time (base models only).
quick-change
reversible drive rolls Digital meter is easy to read and can display 2T/4T latching gun trigger. Allows the
(1.0/1.2 mm) and voltage, amperage or wire feed speed. operator to weld for extended periods without
an easy-to-set tension adjustment knob. having to maintain pressure on the gun trigger
(DX models only).
Professional wire drive motor withstands
even the most demanding applications! Synergic user interface with digital display to
simplify setup and offer precise settings for
welding a variety of materials (DX models only).

Warranted for three years, parts and labour.

ITW Welding – BV International Headquarters

Edisonstraat 10 Miller Electric Mfg. LLC
P.O. Box 1551 An Illinois Tool Works Company
NL-3261 LD Oud-Beijerland, 1635 W. Spencer Street
Netherlands Appleton, WI 54914 USA
TEL: +31 (0) 186 641 444 TEL. : +1 920 735 4554
FAX: +31 (0) 186 640 880 FAX : +1 920 735 4125
MillerWelds.com
 Specifications (Subject to change without notice.)
Amperage/ Amps Input at Max. Open-
Voltage Rated IP Rated Output, Circuit Wire Feed Net
Ranges Output Rating 400 V, 50/60 Hz Voltage Speed Wire Type and Diameter Dimensions Weight
30–350 A, 350 A at IP22S 23 43 VDC 1.3 – 26 mpm Solid steel: 0.6–1.2 mm (.023–.045 in.) H: 825 mm 102.6 kg
15–32 V 29 VDC, (51–1,024 ipm) Stainless steel: 0.8–1.0 mm (.030–.040 in.) (32.5 in.) (227 lb.)
35% duty Aluminium: 0.8–1.2 mm (.030–.045 in.) W: 471 mm
cycle Silicon bronze: 0.8–1.0 mm (.030–.040 in.) (18.5 in.)
Flux-cored: 0.9–1.4 mm (.035–.055 in.) D: 1,066 mm
(42 in.)

All CE models conform to the applicable parts of the IEC 60974 series of standards.

Drive Roll Kits, Drive Rolls and Guides

Select drive rolls and guides from chart below according to type and wire size being used. Drive roll kits include four drive rolls, necessary guides and feature an
anti-wear sleeve for inlet guide.

“U” Groove
4-Roll Kit for “V” Knurled
“V” Groove soft wire or 4-Roll Kit for “V” Groove
4-Roll Kit soft-shelled hard-shelled Drive Roll Wire Guides
Wire Size for hard wire cored wires cored wires for hard wire Inlet Intermediate
0.6 mm (.023/.025 in.) 087132 — — 087130 056192 056206
0.8 mm (.030 in.) 046780 — — 053695
0.8/1.0 mm (.030/.040 in.) — — — 203526 056193* 056207*
1.0 mm (.040 in.) 046781 044750 046792 053700
1.0/1.2 mm (.040/.045 in.) — — — 189285*
1.2 mm (.045 in.) 046782 046785 046793 053697
1.3/1.4 mm (.052/.056 in.) 046783 046786 046794 — 056195 056209
1.6 mm (1/16 in.) 046784 046787 046795 —
*Included with MigMatic 380/380 DX.

Ordering Information
Power Source Stock No. Description Qty. Price

MigMatic 380® 029015542 400 V, 3-phase, 50/60 Hz

MigMatic® 380 Weld Ready Package 029083121 400 V, 3-phase, 50/60 Hz with MIG gun
MigMatic 380 DX
® 029015543 400 V, 3-phase, 50/60 Hz
MigMatic® 380 DX Weld Ready Package 029083122 400 V, 3-phase, 50/60 Hz with MIG gun

Accessories
Drive Rolls Kits, Drive Rolls and Guides See chart above
Bernard™ MIG Gun Q3015TE3EEQ Air-cooled, 300 A, 4.6 m (15 ft.), TOUGH LOCK™ consumables

Date: Total Quoted Price:

Distributed by:

© 2017 Miller Electric Mfg. LLC