Scribd
Upload
556 views

JSS2 Basic Tech Exam

This document contains a 30 question multiple choice exam on basic technology topics including shapes, polygons, triangles, technical drawing instruments, and care of woodworking machines. The questions cover identification and properties of lines, angles, polygons, circles, and triangles. The document also includes short answer theory questions asking to define terms, draw shapes, list instruments and their uses, and label parts of a circle.

Uploaded by

temiodunaike7
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
556 views

JSS2 Basic Tech Exam

This document contains a 30 question multiple choice exam on basic technology topics including shapes, polygons, triangles, technical drawing instruments, and care of woodworking machines. The questions cover identification and properties of lines, angles, polygons, circles, and triangles. The document also includes short answer theory questions asking to define terms, draw shapes, list instruments and their uses, and label parts of a circle.

Uploaded by

temiodunaike7
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

SECOND TERM JSS1 BASIC TECHNOLOGY EXAMINATION QUESTIONS

Subject: BASIC TECHNOLOGY Duration: 2HR Class: JSS 2

OBJECTIVE

1. ___ are basically four-sided plane figures


a. Drawing board
b. Board practice
c. Quadrilaterals
d. Polygons
2. ___ all sides and angles are equal
a. Square
b. Rectangle
c. Trapezium
d. Kite
3. ___ are plane figures bounded by more than four straight lines
a. Trapezium
b. Square
c. Polygons
d. Kite
4. Pentagon has ___ sides
a. 5
b. 8
c. 6
d. 10
5. Polygon with 8 sides is called ___
a. Heptagon
b. Pentagon
c. Octagon
d. Decagon
6. Polygon with 6 sides is called
a. Octagon
b. Hexagon
c. Decagon
d. Heptagon
7. ___ is a straight line which touches the circumference at a point
a. Tangent
b. Arcs
c. Rectangle
d. Square
8. ___ is a plane figure bounded by three straight lines
a. Rectangle
b. Triangle
c. Square
d. Trapezium
9. ___ is a triangle that has three equal sides and three angles
a. Equilateral triangle
b. Isosceles triangle
c. Scalene triangle
d. Right angle triangle
10. ___ can be defined as an operation organized to free from danger
a. First aid operation
b. Rescue operation
c. Responsive operation
d. Caring operation
11. Which of the following is not a quadrilateral
a. Quadrilateral
b. Rhombus
c. Prism
d. Rhomboid
12. Polygon with 10 sides is called
a. Decagon
b. Nonagon
c. Pentagon
d. Heptagon
13. A diameter is a line which divides a circle into two ____ parts
a. Equal
b. Unequal
c. Even
d. Uneven
14. A sector is an arc bounded by ___ radius
a. 10
b. 27
c. 2
d. 100
15. Angles in a triangle has up to ___ degree
a. 1200
b. 1800
c. 3600
d. 2400
16. All of the following are types of triangles except
a. Equilateral triangle
b. Scalene triangle
c. Upside down triangle
d. Isosceles triangle
17. A machine is a device that makes work ___ and ___
a. Easier and Faster
b. Faster and Finer
c. Fine and smoother
d. Smoother and eatable
18. Each angle of a square is ___
a. 900
b. 1800
c. 600
d. 450
19. A regular polygon with nine sides is called a/an
a. Hexagon
b. Heptagon
c. Octagon
d. Nonagon
20. The following are quadrilateral except ___
a. Kite
b. Rhombus
c. Rectangle
d. Square
21. Trapezium is also a ___
a. Pentagon
b. Pentagon quadrilateral
c. Parallelogram
d. Triangle
22. The type of triangle with three unequal sides is ___
a. Isosceles
b. Right angle
c. Scalene
d. Quadrilateral
23. The sum of angles in a square is ___
a. 1800
b. 3600
c. 900
d. 1200
24. A triangle can be constructed with the following except
a. Three sides given
b. Three angles given
c. Two sides and altitude given
d. One side and two base angle given
25. The sum of internal angles in a quadrilateral is ___
a. 1800
b. 900
c. 3600
d. 4500
26. Which of the following can be used to construct angle 270?
a. A pair of compass
b. A plain scale
c. A scale of chord
d. A protractor
27. A plain figure with four sides and angles is called ___
a. Triangle
b. Quadrilateral
c. Shapes
d. Polygon
28. An example of a driving tool is the ___
a. Hack saw
b. Chisel
c. Screw
d. Screw driver
29. The line passing through the center and touches the circumference of a circle is known as
___
a. Section
b. Tangent
c. Diameter
d. Quadrant
30. Scale rules are used to produce
a. Reduced or enlarged sizes
b. Enlarged sizes of drawing
c. Equal and normal size of drawing

THEORY
Answer only four questions

1a) Define Polygon

1b) What is a circle

2a) Draw the following polygons

I. Pentagon
II. Hexagon
III. Octagon
IV. Decagon

3a) List 3 care and maintenance that must be given to wood work machines

3b) What is a wood turning lathe machine

4a) List 5 instruments used for technical drawing

4b) Explain the uses of the following technical drawing instruments

I. Tee square
II. Set square
III. Compass
IV. Divider
V. Protractor

5a) Draw a circle and label the various listed parts

I. Chord
II. Diameter
III. Quadrant
IV. Minor and major sector
V. Minor and major segment

You might also like