Scribd
Upload
436 views

5W Laser Module Engraving Parameters

This document provides laser engraving and cutting parameters for a 5W laser module on various materials. It recommends an engraving power of 100% and speeds ranging from 700 to 5000 mm/min depending on the material, such as 2500 mm/min for wood and bamboo. For laser cutting, parameters vary from 90 to 1500 mm/min based on material thickness, such as 180 mm/min for 2mm boards and 100 mm/min for leather. Special surface preparation like applying a black paint or heat transfer paper is needed for some transparent materials.

Uploaded by

Alvis Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
436 views

5W Laser Module Engraving Parameters

This document provides laser engraving and cutting parameters for a 5W laser module on various materials. It recommends an engraving power of 100% and speeds ranging from 700 to 5000 mm/min depending on the material, such as 2500 mm/min for wood and bamboo. For laser cutting, parameters vary from 90 to 1500 mm/min based on material thickness, such as 180 mm/min for 2mm boards and 100 mm/min for leather. Special surface preparation like applying a black paint or heat transfer paper is needed for some transparent materials.

Uploaded by

Alvis Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5W laser module engraving parameters

Mode Materials Power（%） Speed（mm/min） NOTE


Wood board 100 2500
Bamboo 100 2500
Solid wood 100 2500
Leather 100 2000
Glass 100 700 Te surface needs to be painted black or heat transfer paper applied.
Engraving
Geramic 100 700 The surface needs to be heat transfer paper applied.
Acrylic 100 1500 For transparent surface need to be painted black.
Stainless steel 100 300
Anodized metal 100 800
Fabric 40 5000

2mm thick board 100 180


3mm thick board 100 120
4mm thick board 100 90 Cutting thick boards can reduce the focal length appropriately.
Cutting
Cardboard 100 1500
Leather 100 100
Fabric 100 1500

You might also like