20230G pi02

NATIONAL INSTITUTE OF TECHNOLOGY, JAMSHEDPUR

Mid Semester ExaminationDepartment
of B.Tech of
(1 Physics
Sem. ME,PIE &ECM), 2023-24
Time: 2 Hours, Maximum Marks: 30
Date of Exam : 16-10-2023 Faculty: H.L. Yadav, N.Agnihotri
Answer allquestions
Question-1 (a)Write all the fo° Maxwell's equations in integral form 6
ahd transform them into their corresponding differential
form using proper theorems.

Discuss the contribution of Maxwell in electromagnetic 2

theory.
(Establish the equation of continuity. 2

Question-2 (aDerive the electromagnetic wave equations involving (i) 4

electric field vector E and (ii) magnetic field
using diferential form of Maxwell's equations. vector B
. (b)Write expression for Poynting vector . Give its unit and 3
physical significance.
( Find amplitude of electric field vector associated with a 3
collimated beam of light of intensity 2.0 kilo watt/m
propagating in free space.
QuestYón-3(aHow plane polarised light is different from unpolarised 2
light?
Loj Define Brewster's angle and Brewster's law. Prove that 5
reflected and transmitted light are mutually perpendicular
to each other corresponding to an unpolarised light ray
falling obliquely on a transparent medium of refractive
index u kept in air.
, e) Find angle of refraction for an unpolarised light wave 3
travelling in air and falling obliquely on water surface
(H=1.33) so that reflected light is completely plane
polarised.
 NATIONAL INSTITUTE OF TECHNOL0GY JAMSHEDPUR
Department of Electronics and Communication Engineering
Autumn, Mid Semester Examination, October 2023
B. Tech(H), 1s Year, 1st Senester Course Code: EC1101
(ME, MME, PIE and ECM) Course Name: Electronics and
Instrumentation

Time: 2 Hours, M, Marks: 30 Name of Faculty: Dr. Arjun Kumar(ECE)

Dr. Amit Kumar (ECE)
Dr. Chandra Deep Singh (ECE)
INSTRUCTIONS:
Answer all the questions.
Marks of the question and part thereof areindicated in the right hand margin.
Missing data, if any, may be assumed suitably.
IV Write your Roll No. on each sheet of the answer
V. Before attempting the question paper, be sure that youhave got the correct question paper
VI. Answer of each group should be written at one place

What is the one important difference between the characteristics of a simple (5.0)
Switch and those of an ideal diode?
b. Determine the thermal voltage for a diode at a temperature of 20°C.
For the same diode of part (b), find the diode current if lo (reverse saturation
current) is 40 nA, n=2, and the applied bias voltage is 0.5 V.

Q.2 piscuss the full wave (Center Taped) and Bridge type rectifier circuit? (5.0)
Obtained the mathematical expression and numerical value for the circuit
of the following, (a) Vpc (b) VRMS (c) Form-factor (d) Ripple Factor.
Determine Vo and the required PIV rating of each diode for the
configuration of given figure.
+
100 V

Ideal diodes

-100V
2.2 k2
 Q.3 Write a short note on any of the three from the following: -
a. Direct and Indirect Band gap Semiconductor (6.0)
b. Junction Capacitance in Diode
Diffusion current and Drift current density
Zener and Avalanche Breakdown
Q,4 Bíscuss the construction and working principle of Zener diodé? Design a
voltage regulator that will maintain an output voltage of 20 Vácross a 1-k (5.0)
load with an inputthat will vary between 30 Vand 50 V.That k, determine the
proper value of Rs and the maximum current lzM shown in figure.

R
+

+
lM
V,=20v 1k)

Q.5 Define clippefs and clampers? Sketch in and vo for the network shown in (4.0)
the figure.
10 k2

10 V
S

+ +,
53V 7.3 V
-I0 V

Q.6,a. Why Silicon is preferred over Germanium semiconductor? (5.0)

effect of temperature and doping
b. Define Fermi energy level. Explain thesemiconductor.
concentration on fermi level for n-type

***************
**** BEST OF LUCK
o23UbPID29

NATIONAL INSTITUTE OF TECHNOLOGY JAMSHEDPUR

Mechanica| Engincering (Autumn Mid Semester Exam - 20123)
Department of
Course ode: MEI|01 Coute Tite: Fnginecring Mechanics
Date: 20710/2023(Friday) Duration: 02 hrs.
(OoDs.)
B Tech
(2031tteh)K'as9d, Branch: PIS, ME, MME, FCM
Ist Scm.Jpsttctoy: A VKDalla, Bipin Kr.
Ourse
Maz. Marka: 3)
Answer All the )uestions,
The figures in the right-hand margin
indicate Tul marks for aquestion.
O.0)What are rectangular the componcnts of 500N force passing frorm origin O to C
as
shown in Fig.l(a)? What arc the dircction cosines?
(2.5|

F=500N

45
A
B
X
Fig. 1(a)
(b). Compute the simplest resultant for
loads shown in Fig.1(b) acting on the
the interccpt with axis of the beam. Find
beam.
[3.5]
375N
75 Nm

A Im 500N

- I Sm -
B Fig. 1(b)
8m 1m
0.2.Reduce the force
system acting on the body as shown in
axis of the wrench by giving the Fig.2 to a wrench. Give the
point of intersection of the
wrench with plane A. (4]
2m Z-axis
500 N
500 N
1.5m
Pne A
1.5m
y-axis

500 N
X-axis
Fig. 2
1
 Block Cas shown in Fig.3 mass of 100 kg and identical block A and B have
has a
masses of 75 kg can the arrangement shown
in Fig.3 remain ineach.
If u, =0.2 for all contact surfaces,
equilibrium?
C

45 45 Fig. 3
B

Q.4. Drawthe
SFD and BMD for the
beam AB loaded andIsupported asshown in Fig.4. [5)
5kN /m
A
4m
B
4m
5 KN /m Fig.4
Q3. (a) The moment of a given
plane system of
(,2) are 10, 12 and 21 respcctively. Findforces about three points (1,-l),
the resultant force and equation(k,) tu
through which resultant force pass through it. of line
[3]
(b) Determine the component of the force along each of the coordinate axis as
shown in fig. 5.
(2]

Fig.5

Q. 6. A given truss as shown in fig. 6 with load is 100 kN.

Determine the force exerted in the
members DE, CE and CB respectively. [5]

Fig.6

2
2023Uupl024

OrTECHNOLOGY,JAMSHEDPUR
NATIONAL INSTITUTE
AUTUMN SEMESTER 2023-24
Management
Departnent of lumanities, Social Selences &
Mid Senester Examination
for Conmunicstion
Course Titte: Lnglish ME, MM, I, BCM
Course Code: HSII01 Branches: Shin: A
Bhushan, Dr. Doreswamy
Course Instructors: Dr Rajiv Mux.Marks: 3)
2023
Date: 19 October
Duration: 02 Hours

INSTRUCTIONS:
following qucstions:
1) Answer Any Threeof the value. Candidates have to answer all parts of a
2) All qucstions are of cqual place only.
particular qucstion, at one
margin indicate full marks.
3) The figurcs in the right hand

QUESTIONS:
following topics:
VWrite a paragraph on Any Two of the
aMy Institute.
DYArtificial Intelligence: A Boon or Banc?
c) Overcoming health problems. (10)
d) We all make mistakes.
in the
change your branch on the basis of your CGPA. Write an application,
2. Suppose you want to Institutc
format, to the Dean (Academic), requesting him to upload all the details on thc
Block (10)
that the first year students may avail themselvcs of this facility.
Website so

the tendency of some govcrnments to

,3The poem The Unknown Citizen" is a powerful criticism of
Discuss this statement with close
invade the privacy of the individual citizens on every level.
reference to the poem.
(10)

How does John Keats draw une human world of sorrow in his poem, Ode to a Nightingale? (10)
 NATIONAL INSTITUTE OF TECHNOLOGY, JAMSHEDPUR
Time: 2 Hours Mid-Semester Examination Full Marks: 30
Branch: ME, MME, PIE &ECM
Subject: Science of Living System (HS 1102)
Answer all Questions
How normal human beings breatthe Oxygen from the atmosphere?
Justify your answer with
respect to the difference in partial pressure of Oxygen. [5]
2. What is Central Dogma? Considering an Eukaryotic cell, name
the following:
a) Kitchen of the Cell
b) Protein factory of the Cell
c) Control room of the Cell
[5)
How the process of Aerobic respiration takes place in various steps? Write down the key
chemical reaction of Lactic acid and Ethanol Fermentation.
[5]
4 a There are 28 chromosomes in a sperm cell of a Sheep which is 20 pg in
content. What
would be the number of chromosomes and amount of DNA (Content) in the
Sperm Mother
Cell' during GË and G2 phases of cell cycle? [2.5]
Lb) Give the step by step reactions of Glycolysis. How many unit(s) of energy is
produced
during this cycle? 2.5]
5. With a labelled diagram, describe the process of Prophase-1? Taking 4chrorosomes in
the nucleus, describe the different phases of Meiosis-1? [5]
6, Describe the following cycle:
Cell cycle
[2.5]
Ccycle (2.5]

ALL THE BEST