Legislative Act

A Project Report on

“Legislative Act”

Submitted By:
Shubham Radhakrishna Joshi (2111630128) (21319)
Lokesh Santosh Kale (2111630126) (21350)
Ritesh Tulshiram Patil (2111630109) (21310)

Guided By:

Submitted To:
DEPARTMENT OF COMPUTER ENGINEERING

GOVERNMENT POLYTECHNIC HINGOLI

DEPT. OF COMPUTER ENGINEERING | 1
 Legislative Act

Government Polytechnic Hingoli

Sixth Semester
(Year: 2023-24)
Micro Project
Management(ETI)(22509 )

Title of the Project: “ Legislative Act”

Program: Computer Engineering (CO6I)

Members of the Group:

1. Shubham Joshi Roll No : 21319

2. Lokesh Kale Roll No : 21350

3. Ritesh Patil Roll No : 21310

DEPT. OF COMPUTER ENGINEERING | 2

 Legislative Act

Maharashtra State Board of Technical Education, Mumbai

CERTIFICATE
This is to certify that,
Mr. Shubham .R, Joshi Mr.Lokesh .S. Kale & Mr.Ritesh .T. Patil
Roll No. 21319, 21350 & 21310 of Sixth Semester of Diploma in Computer
Engineering of Government Polytechnic Hingoli has completed the Micro
Project satisfactorily in course Management (22509) for the academic year 2023-
24 as prescribed in the curriculum.
Place : Hingoli Enrollment No : 2111630128,
2111630126,
2111630109

Date : / /2023 Exam Seat No :

Course Coordinator HOD Principal

DEPT. OF COMPUTER ENGINEERING | 3

 Legislative Act

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

MICRO PROJECT
Progress Report / Weekly Report
Name of the Project: Legislative Act Course: Management (22509)
Program: Computer Engineering (CO6I) Roll No. 21319,21350,21310

Signof
WeekNo
Date Work / Activity Performed the
Faculty
Collecting Information about
1 10/01/24
Legislative Act

Collecting Images regarding

2 12/01/24
Legislative Act

3 13/01/24 Searching About Legislative Act

4 15/01/24 Collecting Information regarding Its Architecture

5 20/01/24 Finding the advantages

6 21/01/24 Analyzing its Future Scope

7 21/01/24 Searching its real-life applications

8 22/01/24 Preparing the Project Report Format

9 23/01/24 Adding the collected information in the report

Adding the images in the report

10 24/01/24

11 25/01/24 Reformatting the Report

12 01/02/24 Preparing the indexes of the report

DEPT. OF COMPUTER ENGINEERING | 4

 Legislative Act

13 03/02/24 Making Final Changes in the Report

Reviewing the report again and eliminating the

14 06/02/24
mistakes

15 08/02/24 Finalizing the Micro-Project

16 / /24 Submitting Report to the teacher

LEGISLATIVE ACT |

DEPT. OF COMPUTER ENGINEERING | 5

 Legislative Act

Teacher Evaluation Sheet for Micro Project

Course Title and Code: - Management(22509)

Title of the Project: -. Legislative Act

Group No: -
COs addressed by the Micro Project:

Describe Legislative Act

CO a:

Important Concept of legislative Act

CO b:

Compare Models of Digital Forensic Investigation

CO c:

CO:

Marks:-

Marks Tota l
Marks for obtained by the Marks
Roll No. Name Of Student Group individual (10)
Work (06) based on viva
(04)

21319 Shubham Joshi

21350 Lokesh Kale

21310 Ritesh Patil

Name and designation of Faculty : Prof.G.K.Mangnale

Lecturer, Comp. Engg. Department

Signature:

DEPT. OF COMPUTER ENGINEERING | 6

 Legislative Act

Aim of the Micro Project:- To Explain in deap Legislative Act

Action plan: -

Sign of the
Week
Date Work / Activity Performed Faculty
No

Collecting Information about Legislative Act

1 10/01/24

Collecting Images regarding Legislative Act

2 12/01/24

Searching About Legislative Act

3 13/01/24
Collecting Information regarding Its Architecture
4 15/01/24
Finding the advantages
5 20/01/24

Analyzing its Future Scope

6 21/01/24

Searching its real-life

7 21/01/24
Preparing the Project Report Format
8 22/01/24
Adding the collected information in the report
9 23/01/24

Adding the images in the report

10 24/01/24

Reformatting the Report

11 25/01/24

Preparing the indexes of the report

12 01/02/24

Making final changes in the report.

13 03/02/24

DEPT. OF COMPUTER ENGINEERING | 7

 Legislative Act

Review in the report again and Eliminating.

14 06/02/24

Finalize the microproject.

15 08/02/24
Submitting report to the respective teacher.
16 /02/24

DEPT. OF COMPUTER ENGINEERING | 8

 Legislative Act

LEGISLATIVE ACT |

Resources Required: -

SR. Name of the Resources Specification Quantity Remark

No.

1 Computer System 4GB RAM,1 TB HDD, 1

AMD processor with
Windows 10 OS

2 MS Office, MS Excel 2019

Actual Procedure Followed: -

1. Collecting Information about Legislative Act

2. Identify the requirement of the project
3. Desgin the structure of the project
4. Test the project
5. Prepare the final report
6. Making final changes in the report
7. Reviewing the report again and eliminating the mistakes
8. Finalizing the Micro Project
9. Submitting Report to the teacher

DEPT. OF COMPUTER ENGINEERING | 9

 Legislative Act

ACKNOWLEDGEMENT

It is my great pleasure to acknowledge my research guide Prof. G. K. Mangnale lecturer in Government

Polytechnic, Hingoli, His valuable guidance, constant inspiration, unending support helped me a lot of focus my
views in proper perspective,

I would like to express my sincere gratitude to Prof. N. S. Jadhao for their invaluable guidance, support, and
encouragement throughout this project. Their expertise, insight, and advice have been instrumental in helping
me to overcome challenges and achieve success. I am truly grateful for their leadership and mentorship, which
have been essential to my growth and development as a professional. Thank you for your unwavering
commitment to excellence and for being an inspiration to us all.

Our sincere and whole hearted thanks Prof. B. P. Deosarkar, principal Government Polytechnic, Hingoli for
inspiring us to achieve highest goal. Last but not least I am also thankful to my parents and friends who helped
me a lot in finalizing the project within limited time frame. Thank you

Shubham Radhakrishna Joshi (2111630128) (21319)

Lokesh Santosh Kale (2111630126) (21350)
Ritesh Tulshiram Patil (2111630109) (21310)

DEPT. OF COMPUTER ENGINEERING | 10

 Legislative Act

Abstract

The Ministry of Labor and Employment seeks to protect and safeguard the interests of workers in general and
those who constitute the poor, deprived and disadvantaged sections of the society, in particular, with due regard
to creating a healthy work environment for higher production and productivity, and developing and
coordinating vocational skill training and employment services. Government's attention is also focused on
promotion of welfare activities and providing social security to the labor force both in the organized and
unorganized sectors, in tandem with the process of liberalization. These objectives are sought to be achieved
through enactment and implementation of various labor laws, which regulate the terms and conditions of service
and employment of workers.

LEGISLATIVE ACT |

DEPT. OF COMPUTER ENGINEERING | 11

 Legislative Act

INDEX

Sr. No. Chapter Names Page No.

1 Introduction of Legislative Act 13

2 The Factories Act 15

2.1 Objectives And Scope
2.2 Applicability of the Factories Act,1948
2.3 Approve, Licensing and Registration of Factories
2.4 The Inspecting Staff

3
Main Provision of Act 15
3.1 Health Measure
3.2 Welfare Measure
The Industrial Dispute ACT,1947 17

4 Conclusion 21

DEPT. OF COMPUTER ENGINEERING | 12

 Legislative Act

1. INTRODUCTION

India has a number of labour laws that govern almost all the aspects of employment such as payment
of wages, minimum wages, payment of bonus, payment of gratuity, contributions to provident fund
and pension fund, working conditions, accident compensations, etc. The Government has enacted
certain central legislations, viz, the Employees Provident Fund and Miscellaneous Provisions Act,
Employees State Insurance Act, Payment of Wages Act, Minimum Wages Act, Equal Remuneration
Act, Maternity Benefits Act, etc. In addition, at the State level, the State Governments usually have a
separate Labour Ministry, which seeks to ensure compliance with State labour laws (viz, State Shops
and Establishments Act, Labour Welfare Fund Act, etc) through its Labour Department, which is
generally operational at the district level.

* Necessity of Legislative acts

1. They improve industrial relations, i.e., employee-employer relations.
2. They help in paying fair wages to workers.
3. They minimize unrest among the workers.
4. They help to give compensation to workers, victims of accidents.
5. They help in reduces conflicts, strikes etc,
6. They help to procure job security for the workers.
7. They help to promote wholesome environmental conditions in the industry.
8. They help in fixing hours of work, rest pauses, etc

DEPT. OF COMPUTER ENGINEERING | 13

 Legislative Act

The Factories Act

Objective and Scope:

The main object of the Factories Act, 1948 is to ensure adequate safety measures and to promote the
health and welfare of the workers employed in factories. The Act also makes provisions regarding
employment of women and young persons (including children and adolescents), annual leave with
wages etc. The Act extends to whole of India including Jammu & Kashmir and covers all
manufacturing processes and establishments falling within the definition of ‘factory’ as defined under
Section 2(m) of the Act. Unless otherwise provided it is also applicable to factories belonging to
Central/State Governments. (Section 116) The factories act regulates conditions of work (health, safety
etc.) in factories, it safeguards the interest of workers and it is for the welfare of factory workers. This
act received the assent of Governor-General of India on September 23, 1948 and came into force on
April 1, 1949. This act was further amended in 1950, 1951, 1954,etc.,and lately in 1987. This act is
applicable to any factory in which ten or more than ten workers are working. The factories act has a
provision in respect of Employee health and safety, Hours of work, .Sanitary conditions and
wholesome work environments, Employee welfare, Leave with wages, etc.

Applicability of the Factories Act, 1948:

 The Act is applicable to the premises wherein:

 10 or more workers are employed with use of power
 20 or more workers are employed without the use of power
 Less than 10 workers, if activity is notified by the State Government.

Engaged in manufacturing activities:

 Factories Act, 1948, is a central act, enforced by the state governments making the
Relevant rules to extend scope and objectives of the Act.
 The Act is applicable to all the factories including state, and Central Government.
 Onus is on the part of the factory management to comply with the provisions of the Act
And made their under.

DEPT. OF COMPUTER ENGINEERING | 14

 Legislative Act

Approval, Licensing and Registration of Factories:

Before starting a factory,

 Take permission of the state government or chief inspector for the site on which factory is to be
made.
 Get the factory plans and specifications approved by the inspector of industries.
 Pay the necessary fees and get the registration and licensing of the factory.

If on an application to chief Inspector to uses particular site for a factory, nothing is heard
within three months, the permission is deemed to have been granted.
In case of refusal from chief inspector or state government, the applicant within 30 days of the
date of such refusal may appeal to central government in this connection.
An occupier should, at least 15 days before he occupies a places a factory, send to Chief
Inspector a written notice containing name and address of occupier and factory, nature of
manufacturing process, nature of power to be used, name of factory manager, number of workers
required, etc

The Inspecting Staff:

State government appoints Chief Inspector and other Inspectors who may
 Enter any factory,
 Make examination of premises, plants, machinery and any documents related to factory.

Duties of the Inspectors:

The Inspectors are required:
(i) To carry out duties as laid down under Section 9 (b) and (c);
(ii) To ensure that statutory provisions and rules framed are carried out properly; an
(iii) To launch prosecutions against factory-owners under the provision of Chapter X of the Act.
Certifying Surgeons State government may appoint qualified medical practitioners as

certifying surgeons:
i. The examination and certification of young workers, and
ii. The examination of workers engaged in dangerous occupation or processes.

DEPT. OF COMPUTER ENGINEERING | 15

 Legislative Act

Main Provisions of the Act:

Welfare Measures for Workers They are of two types –

1. Health Measures
2. 2.Welfare Measures

Health Measures:
1.Cleanliness
 Removal and disposal of dirtfrom floors, benches etc., everyday .
 Washing of floors of work room at least every week, using disinfectant.
 Effective means to drainage to avoid collection of water, etc., on the work floor.
 All inside walls and partitions, all ceiling tops of rooms, passage and staircase to be
repainted once in 5 years if they are already painted; andto be white-washed and the white-
washing to be carried out at least once in fourteen months.

2. Disposal of Wastes and Effluents:

Effective and suitable arrangements should be made for the disposal of wastes and effluents due to the
manufacturing process.

3. Ventilation and Temperature :

In every factory, effective and suitable provision shall be made for securing and maintaining in
every workroom,
 Adequate ventilation by fresh air circulation,
 Suitable temperature to provide conditions of comfort and prevent injury to the health of
workers.

4. Dust and Fumes :

Employer shall take necessary steps to keep workrooms free from dust or fumes offensive or
injurious to the health of the workers.

5. Artificial Humidification:
In factories (e.g., textile) where humidity of air is artificially increased, state government may
make rules ( Prescribing standard of humidification ;
 Regulating the method of artificially increasing humidity ;
 Directing prescribed test for determining humidity ; and
 Prescribing method for achieving adequate ventilation and cooling the air in
workroom. The water employed for humidification shall be from a source of drinking
water.

DEPT. OF COMPUTER ENGINEERING | 16

 Legislative Act

6. Overcrowding:
No workroom should be overcrowded to an extent, which is injurious to the health of workers.
The minimum space provided for a worker should be 4.2 cu. m.

7. Lighting:
Light whether artificial or natural or both, should be sufficient and suitable in all workrooms,
Skylights and glazed windows for lighting the workrooms should be kept clean and
unobstructed. Glares and shadows which cause eye strain or risk accidents should be prevented.
& Drinking Water

8. Drinking Water:
Section 18 deals with the provisions relating to arrangements for drinking water in factories. In
every factory, effective arrangements shall be made to provide and maintain at suitable points
conveniently situated for all workers employed therein, a sufficient supply of wholesome
drinking water.

9. Conservancy Arrangements:
In every factory, there shall be provided and maintained, separate arrangement for toilets for
male and female workers at convenient places. These should be adequately lighted, ventilated
and maintained in a clean sanitary condition. Management (22509) Maharashtra State Board of
Technical Education 103

10. Spittoons:
Section 20 (1) lay down that in every factory, there shall be provided a sufficient number of
spittoons in convenient places. They shall be maintained in a clean and hygienic condition.

DEPT. OF COMPUTER ENGINEERING | 17

 Legislative Act

Welfare Measures:
 Washing facilities
 Washing facilities adequately screened for male and female workers should be provided in the factory.
Washing facilities shall be easily accessible and kept clean.
 Facilities for sitting Suitable sitting facilities shall be provided for all workers obliged to work in standing
position so that they may take rest if an opportunity occurs in the course of their work, without affecting the
work.
 First aid appliances
 For every 150 workers, minimum one fully equipped first-aid box shall be kept available during all working
hours. A factory employing more than 500 workers shall have a properly equipped ambulance room.
 Canteens: A canteen shall be provided in each factory in which more than 250workers are ordinarily
employed.
 Shelters, rest-rooms and Lunch-rooms Every factory in which more than 150 workers are ordinarily
employed, adequate, suitable, clean, sufficiently lighted and ventilated rest and lunch rooms shall be provided.
 Every factory shall provide clean, adequately lighted and ventilated rooms for the use of children (under the
age of six years) of women workers, if the number of such women workers exceeds 30.
 Welfare officers.
 Every factory employing 500 workers or more shall employ welfare officers. The state government may
prescribe the duties, qualifications and conditions of service of welfare officers so employed.

DEPT. OF COMPUTER ENGINEERING | 18

 Legislative Act

THE INDUSTRIAL DISPUTE ACT, 1947

Introduction and scope of Act:

According to Industrial Disputes Act, 1947, Industrial dispute is any dispute or difference
between employees and employees, or between employers and employers, which is connected
with the employment or non-employment, or the terms of employment or with the conditions
of work of any person. Conflict is inevitable in the industrial organization. Labour and
management oppose each other in numerous ways in the course of daily work. Most industrial
jobs are repetitive, monotonous, difficult, dirty and even accident prone. As a result of this
management uses strict supervision to get the work done, on the other hand, the normal
sentiment of the worker is one of discontent. The interests of these two parties are in conflict
with each other.

Objectives of the Act:

The Preamble to the Act reads thus, "An Act to make provision for the investigation and
settlement of industrial disputes and for certain other purposes." the principal objectives of the
Act may be stated as below:
1. To ensure social justice to both employers and employees and advance
progress of industry by bringing about harmony and cordial relationship between the parties.
2. To settle disputes arising between the capital and labour by peaceful methods and
through the machinery of conciliation, arbitration and if necessary, by approaching the
tribunals constituted under the Act. If disputes are not settled, it would result in strikes or
lockouts and entail dislocation of work, essential to the life of the community.
3. To promote measures for securing and preserving amity and good relations between
the employer and workmen.
4. To prevent illegal strikes and lockouts.
5. To provide compensation to workmen in cases of lay-off, retrenchment and closure .
6. To protect workmen against victimization by the employer and to ensure termination
of industrial disputes in a peaceful manner.

DEPT. OF COMPUTER ENGINEERING | 19

 Legislative Act

Causes of Industrial Disputes/Conflict:

Industrial includes three different possible sets of antagonists in industrial conflict.

However, the present discussion is confined to disputes arising between management and
workers.
The causes of dispute are:
1. Economic causes – Wages, salaries, profit, etc.
2. Social causes – Low morale, corruption, pollution, rising unemployment,
3. Political causes – Political rivalry, unstable government, etc.
4. Technical causes – Loss of jobs due to automation, unsuitable technology,
5. Psychological causes – Loss of job, propaganda, instigation, etc.
6. Market causes – Competition, loss, recession, etc.
7. Legal causes – Court order of closing down factories, shifting, etc.

Important Aspects of the Act:

 An industrial dispute may be referred to an Industrial tribunal.
 An award shall be binding on both the disputing parties for a period not exceeding
one year.
 Strikes and lockouts are prohibited during the pendency of, conciliation and
adjudication proceedings; settlement reached in the course of conciliation proceedings,
awards of industrial tribunals declared binding by the appropriate government.
 In public interest or emergency, appropriate government can declare the following
industries to be a public utility service for a maximum period of 6 months, Transport by land,
air, and water, Foodstuff, Coal, Cotton textile, and Iron and Steel.

DEPT. OF COMPUTER ENGINEERING | 20

 Legislative Act

CONCLUSION

The main object of Factories act, 1948 is to ensure adequate safety measures and
to promote the health and welfare of the workers employed in factories.
The industrial disputes act 1947 is formed to secure industrial piece and harmony by
providing machinery and procedure for the investigation and settlement of industrial disputs
by negotiations.
This acts Maintenance peaceful work culture in the industry in India. It also help to provide
the relief to the workmen in the matter of lay off closure of undertaking etc,

DEPT. OF COMPUTER ENGINEERING | 21

 Legislative Act

LEGISLATIVE ACT |

4. Reference List

Books and Websites :

 Management Manual (22509)

 https://leginfo.legislature.ca.gov/

 \https://en.wikipedia.org/wiki/Legislation

DEPT. OF COMPUTER ENGINEERING | 22