Operation Guide 5590

To change the Daylight Saving Time (summer time) setting Adjusting the Digital Time and Date Settings
1. In the Timekeeping Mode, hold down A until the
flashing SET indicator disappears from the display and Use the procedure below to adjust the digital time and date settings.
the currently selected city code appears on the display.
To configure the digital time and date settings
2. Press C to display the DST setting mode. 1. In the Timekeeping Mode, hold down A until the
3. Press D or B to toggle between Daylight Saving flashing SET indicator disappears from the display
Time (ON) and Standard Time (OFF). and the currently selected city code appears on the
x Note that you cannot switch between daylight saving display.
time and standard time while UTC is selected as your
Home City.
DST indicator
4. After the setting is the way you want, press A to
return to the Timekeeping Mode.
x The DST indicator appears to indicate that Daylight
Saving Time is turned on.

E-20 E-21

2. Press C to move the flashing in the sequence shown below to select the other 3. When the timekeeping setting you want to change is flashing, perform the
settings. operation described below.
C C C Screen To do this: Do this:
Home City DST
(page E-18) (page E-20) 12/24-Hour Format Seconds Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping Use D and B.
C
Reset the seconds to 00 Press D.
C Hour

C Change the hour or minute

Illumination Duration Use D (+) and B (–) to

Minute Change the year
(page E-39) change these settings.
C C
Change the month or day
Button Operation Tone On/Off
(page E-43) Day Month Year
C C C 4. Press A to exit the setting mode.

E-22 E-23

Note Checking the Current Time in a Different Time Zone

x Resetting the seconds to 00 while the current count is in the range of 30 to
59causes the minutes to be increased by 1. World Time City hour and You can use the World Time Mode to view the current
x The watch’s built-in full automatic calendar makes allowances for different month minute time in one of 31 time zones (48 cities) around the globe.
lengths and leap years. Once you set the date, there should be no reason to The city that is currently selected in the World Time Mode
change it except after you have the watch’s battery replaced. is called the “World Time City”.
x While 12-hour format is selected for timekeeping, a P indicator will appear for x The hour and minute hands indicate information for the
times from noon to 11:59 p.m. No indicator appears for times from midnight to currently selected Home City.
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any x When you enter the World Time Mode, the currently
P indicator. selected city code and city name (English) scroll once
x The day of the week changes automatically when the date changes. across the digital display. After that, the current time in
the World Time City is displayed.
x You can view the name (English) of your Home City by
pressing A.
Second

E-24 E-25

To enter the World Time Mode To specify standard time or daylight saving time (DST) for a city
Use C to select the World Time Mode as shown on page E-10. 1. In the World Time Mode, use D and B to display the
city code (time zone) whose Standard Time/Daylight
To view the time in another time zone Saving Time setting you want to change.
In the World Time Mode, use D and B to change the city code.
2. Hold down A for at least two seconds.
x This toggles the city code you selected in step1
between Daylight Saving Time (DST indicator
displayed) and standard time (DST indicator not
DST indicator displayed).
x Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
x The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities
are not affected.

E-26 E-27

Using the Stopwatch To perform an elapsed time operation

The stopwatch measures elapsed time, split times, and two finishes. D DDDB
x The stopwatch measures elapsed time in units of 1/100 seconds for the first hour, Start Stop (Resume) (Stop) Reset
and in 1-second units after that for up to 24 hours total. After that, elapsed time
reverts to zero and then stops. To pause at a split time

Minutes D BBDB
Start Split Split release Stop Reset
(SPLIT flashing)
Seconds
To measure two finishes
D BDBB
1/100 Second Start Split Stop Split release Reset
(SPLIT flashing) (SPLIT displayed) Display time of
First runner finishes. Second runner second runner.
To enter the Stopwatch Mode Display time of first finishes.
Use C to select the Stopwatch Mode as shown on page E-11. runner.

E-28 E-29