Scribd
Upload
13 views

Combined Filters

Combined filters provide respiratory protection against harmful gases, vapors, and particles in various industries like chemical, pharmaceutical, textile, food, and mining. There are several types of combined filters classified by the contaminants they protect against such as A2P3 R for organic vapors and B2P3 R for inorganic gases like chlorine and hydrogen sulfide. Combined filters must meet quality requirements for breathing resistance, permeability, and minimum gas capacity as specified in European standards EN 14387 and EN 143 to ensure proper functioning.

Uploaded by

BiljanaSlavisaStjepanovic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Combined Filters

Combined filters provide respiratory protection against harmful gases, vapors, and particles in various industries like chemical, pharmaceutical, textile, food, and mining. There are several types of combined filters classified by the contaminants they protect against such as A2P3 R for organic vapors and B2P3 R for inorganic gases like chlorine and hydrogen sulfide. Combined filters must meet quality requirements for breathing resistance, permeability, and minimum gas capacity as specified in European standards EN 14387 and EN 143 to ensure proper functioning.

Uploaded by

BiljanaSlavisaStjepanovic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMBINED FILTERS

Personal protection
Combined filters, together with the appropriate half-mask or full face mask, intended for protection of the
respiratory organs against harmful effects of toxic gases, vapours and particles. The filter is used in different branches
of industry: chemical industry, pharmaceutical industry, textile industry, food industry, in mining, etc. The filter
connector is according to the EN 148-1. The quality of the filter is in accordance with the SRPS EN 14387 and the SRPS
EN 143.

TECHNICAL DATA:

Depending on the gas, there are several types of combined filters:


• A2P3 R - organic gases and vapours whose boiling point is higher than
65OC,
• B2P3 R- inorganic gases and vapours (Cl2, HCN, H2S),
• E2P3 R- inorganic gases and vapours (SO2),
• K2P3 R- NH3 and its derivatives and combinations of several types
of protection A2B2P3 R, B2E2P3R, A2B2E2K2P3 R.

Table: Quality requirements for the filter according to standards


EN 14387:2004 + A1:2008 and EN 143:2000 + A1:2006

Breathing resistance
Permeability (%)
Max. (mbar) Capacity GAS
Types of filters
weight 30 l/min 95 l/min NaCl Parafine fog (minute)
(95 l/min) (95 l/min)
250 A2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% C6H12 min. 35
250 B2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% H2S min. 40
CL2 min. 20
HCN min. 25
250 E2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% SO2 min. 20
250 K2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% NH3 min. 40
250 A2B2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% C6H12 min. 35
H2S min. 40
CL2 min. 20
HCN min. 25
250 B2E2P3 R 300 max 2,6 max 9,8 max 0,05% max 0,05% H2S min. 40
CL2 min. 20
HCN min. 25
SO2 min. 20
400 A2B2E2K2P3 R 500 max 2,6 max 9,8 max 0,05% max 0,05% C6H12 min. 35
H2S min. 40
HCN min. 25
SO2 min. 20
NH3 min. 40
CL2 min. 20
NOTE: The following quality requirements apply in laboratory tests under standard conditions.

Should you have any further enquires, please do not hesitate to contact us at [email protected]
All the data given in the brochure are for information purposes only. The final configuration and/or technical
specification are defined for each contract individually.

1.6.1.1.

You might also like